Can't get my board detected

[va2na]

Hi, i am using Angelia board and my pc is running Window 7

I alreading using fixed ip adress in my Anan : 10.10.30.100 and my local pc is 10.10.30.101. This is a dedicated connection from the PC to the ANAN.

Follow your instruction ending with no match...the web brower waiting forever and nothing.. the dos shell show : no match.

Using the protocol standard programmer i cant see my board and load firmware like i want...

Any clues?

[ghost]

VA2NA -- This is Dave KV0S the author of the programming software. First the programs labeled Programmer talk to the previous firmware that must be the same protocol. So if you are updating from protocol 1 to protocol 2 you must use the protocol1 programmer the first time. (HPSDRProgrammer) after the first time you put the protocol 2 on the radio this programmer will no longer work once you have used protocol 2 on your radio the HPSDRProgrammer_web will work and it can be used to update the firmware orload the protocol 1 firmware reverting to the first protocol. All this is a bit tricky the HPSDRBootloader will load either protocol as it uses a different way to talk to the radio. You will need to put a jumper on Bootloader Pin J12 on Hermes not sure which on on Angelia. you will have to be adminstrator on you PC. I gave a talk at thei Years DCC explaining all this and it should be out shortly on Ham Radio Now. I hope this helps. I will also send yo the paper for the talk this weekend. Dave KV0S

…

On Fri, Oct 13, 2017 at 2:32 PM, va2na ***@***.***> wrote: Hi, i am using Angelia board and my pc is running Window 7 I alreading using fixed ip adress in my Anan : 10.10.30.100 and my local pc is 10.10.30.101. This is a dedicated connection from the PC to the ANAN. Follow your instruction ending with no match...the web brower waiting forever and nothing.. the dos shell show : no match. Using the protocol standard programmer i cant see my board and load firmware like i want... Any clues? — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#1>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AS1zDCTPXG7vm5YrZP4N1vI4NSpqVuwSks5sr7rSgaJpZM4P49Hm> .

-- KV0S - Dave Larsen Columbia, MO, USA

[va2na]

Hi Dave, first thank you so much for quickly answering back and let me program my ANAN-100D on protocol 2.

It have been a piece of cake since i was already very familliar with the standard bootloader.

Keep your great work and i am always free to test beta software for HPSDR community

Best 73