compile_generics.yml

name: Compile All

on:
  workflow_dispatch:

jobs:
  build:
    name: Build for ${{ matrix.target.name }}
    runs-on: ubuntu-latest

    strategy:
      matrix:
        target:
         #  sd_spi_cs_pin: 23, sd_spi_clk_pin: 19, sd_spi_miso_pin: 20, sd_spi_mosi_pin: 18, gps_uart_rx_pin: 15, gps_uart_tx_pin: 14
          # Generic configurations (no LED, no screen support)
          - { name: "esp32-generic", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.default.esp32", zip_name: "esp32-generic.zip" }
          - { name: "esp32s2-generic", idf_target: "esp32s2", sdkconfig_file: "configs/sdkconfig.default.esp32s2", zip_name: "esp32s2-generic.zip"}
          - { name: "esp32s3-generic", idf_target: "esp32s3", sdkconfig_file: "configs/sdkconfig.default.esp32s3", zip_name: "esp32s3-generic.zip" }
          - { name: "esp32c3-generic", idf_target: "esp32c3", sdkconfig_file: "configs/sdkconfig.default.esp32c3", zip_name: "esp32c3-generic.zip" }
          - { name: "esp32c6-generic", idf_target: "esp32c6", sdkconfig_file: "configs/sdkconfig.default.esp32c6", zip_name: "esp32c6-generic.zip" }
          - { name: "Awok V5", idf_target: "esp32s2", sdkconfig_file: "configs/sdkconfig.default.esp32s2", zip_name: "esp32v5_awok.zip"}

          # Dev Kit configurations (LED on, no screen support)
          - { name: "esp32c3-devkit", idf_target: "esp32c3", sdkconfig_file: "configs/sdkconfig.devkit.esp32c3", zip_name: "esp32c3-devkit.zip"}
          - { name: "esp32c6-devkit", idf_target: "esp32c6", sdkconfig_file: "configs/sdkconfig.devkit.esp32c6", zip_name: "esp32c6-devkit.zip"}

          # Ghost board (LED on, special pin and LED count)
          - { name: "ghostboard", idf_target: "esp32c6", sdkconfig_file: "configs/sdkconfig.ghostboard", zip_name: "ghostboard.zip"}

          # Screen-supported builds
          - { name: "MarauderV6&AwokDual", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.marauderv6", zip_name: "MarauderV6_AwokDual.zip"}
          - { name: "AwokMini", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.awokmini", zip_name: "AwokMini.zip"}
          - { name: "ESP32-S3-Cardputer", idf_target: "esp32s3", sdkconfig_file: "configs/sdkconfig.cardputer", zip_name: "ESP32-S3-Cardputer.zip"}

          # CYD (Cheap Yellow Display) with touch screen
          - { name: "CYD2USB", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.CYD2USB", zip_name: "CYD2USB.zip"}
          - { name: "CYDMicroUSB", idf_target: "esp32", sdkconfig_file: "configs/sdkconfig.CYDMicroUSB", zip_name: "CYDMicroUSB.zip"}
          - { name: "CYDDualUSB", idf_target: "esp32",  sdkconfig_file: "configs/sdkconfig.CYDDualUSB", zip_name: "CYDDualUSB.zip"}
          

          # 7-inch boards
          - { name: "Waveshare_LCD", idf_target: "esp32s3", sdkconfig_file: "configs/sdkconfig.waveshare7inch", zip_name: "Waveshare_LCD.zip"}
          - { name: "Crowtech_LCD", idf_target: "esp32s3",  sdkconfig_file: "configs/sdkconfig.crowtech7inch", zip_name: "Crowtech_LCD.zip"}

    steps:
      - name: Checkout Repository
        uses: actions/checkout@v3

      - name: Set up Python
        uses: actions/setup-python@v4
        with:
          python-version: '3.9'

      # Manual ESP-IDF Installation
      - name: Install ESP-IDF
        run: |
          sudo apt-get update
          sudo apt-get install -y wget git flex bison gperf python3-pip python3-setuptools cmake ninja-build ccache libffi-dev libssl-dev dfu-util
          git clone -b v5.3.1 --depth 1 https://github.com/espressif/esp-idf.git ~/esp-idf
          ~/esp-idf/install.sh

      - name: Apply Custom SDK Config
        run: |
          cp "${{ matrix.target.sdkconfig_file }}" sdkconfig.defaults

      - name: Set up ESP-IDF and Target
        run: |
          . ~/esp-idf/export.sh
          echo "FLAPPY_GHOST_WEB_HOOK=${{ secrets.FLAPPY_GHOST_WEB_HOOK }}" >> $GITHUB_ENV
          echo "IDF_TARGET=${{ matrix.target.idf_target }}" >> $GITHUB_ENV
          export IDF_TARGET=${{ matrix.target.idf_target }}
          echo "IDF_TARGET is set to $IDF_TARGET"

      - name: Verify SDK Config Options
        run: |
          echo "Checking if configurations exist in sdkconfig.defaults"
          grep -E "CONFIG_WITH_SCREEN|CONFIG_TFT_WIDTH|CONFIG_TFT_HEIGHT|CONFIG_USE_TOUCHSCREEN|CONFIG_USE_JOYSTICK|CONFIG_USE_CARDPUTER|CONFIG_IS_GHOST_BOARD|CONFIG_USE_7_INCHER|CONFIG_Waveshare_LCD|CONFIG_Crowtech_LCD|CONFIG_Sunton_LCD|CONFIG_USE_ILI9341_2" sdkconfig.defaults || echo "One or more options not found in sdkconfig.defaults"

      - name: Clean and Remove Previous SDK Config
        run: |
          # Remove any previously generated sdkconfig file to avoid conflicts
          rm -f sdkconfig
          . ~/esp-idf/export.sh
          idf.py clean

      - name: Build Project with sdkconfig.defaults
        env:
          SDKCONFIG_DEFAULTS: "sdkconfig.defaults"
        run: |
          . ~/esp-idf/export.sh
          idf.py build

      - name: Verify SDK Config Options
        run: |
          echo "Checking if configurations exist in sdkconfig.defaults"
          grep -E "CONFIG_WITH_SCREEN|CONFIG_TFT_WIDTH|CONFIG_TFT_HEIGHT|CONFIG_USE_TOUCHSCREEN|CONFIG_USE_JOYSTICK|CONFIG_USE_CARDPUTER|CONFIG_IS_GHOST_BOARD|CONFIG_USE_7_INCHER|CONFIG_Waveshare_LCD|CONFIG_Crowtech_LCD|CONFIG_Sunton_LCD|CONFIG_USE_ILI9341_2" sdkconfig.defaults || echo "One or more options not found in sdkconfig.defaults"

      - name: Download Correct Bootloader
        run: |
          BOOTLOADER_URL="https://cdn.spookytools.com/bootloaders/${{ matrix.target.idf_target }}.bin"
          BOOTLOADER_PATH="packaged_artifacts/bootloader.bin"
          echo "Downloading bootloader from $BOOTLOADER_URL"
          mkdir -p packaged_artifacts
          curl -L -o "$BOOTLOADER_PATH" "$BOOTLOADER_URL"
          if [ ! -f "$BOOTLOADER_PATH" ]; then
            echo "Error: Bootloader could not be downloaded from $BOOTLOADER_URL"
            exit 1
          else
            echo "Bootloader downloaded successfully to $BOOTLOADER_PATH"
          fi

      - name: Package Build Artifacts
        run: |
          . ~/esp-idf/export.sh
          PARTITION_TABLE_BIN=build/partition_table/partition-table.bin
          GHOST_ESP_IDF_BIN=build/Ghost_ESP_IDF.bin
          if [ ! -f "$PARTITION_TABLE_BIN" ]; then
            echo "Error: $PARTITION_TABLE_BIN not found!"
            exit 1
          fi
          if [ ! -f "$GHOST_ESP_IDF_BIN" ]; then
            echo "Error: $GHOST_ESP_IDF_BIN not found!"
            exit 1
          fi
          cp "$PARTITION_TABLE_BIN" packaged_artifacts/
          cp "$GHOST_ESP_IDF_BIN" packaged_artifacts/
          ZIP_NAME="${{ matrix.target.zip_name }}"
          cd packaged_artifacts
          zip "$ZIP_NAME" bootloader.bin partition-table.bin Ghost_ESP_IDF.bin
          cd ..

      - name: Get the Latest Release ID (Including Pre-releases)
        id: get_release
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
        run: |
          latest_release=$(curl -s \
            -H "Authorization: token $GITHUB_TOKEN" \
            -H "Accept: application/vnd.github.v3+json" \
            "https://api.github.com/repos/${{ github.repository }}/releases" | jq '[.[] | select(.draft == false)] | .[0]')
          release_id=$(echo "$latest_release" | jq -r '.id')
          echo "Latest release ID (including pre-releases) is $release_id"
          echo "::set-output name=release_id::$release_id"

      - name: Upload to Latest Release
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
        run: |
          zip_file="packaged_artifacts/${{ matrix.target.zip_name }}"
          release_id=${{ steps.get_release.outputs.release_id }}
          curl -X POST \
            -H "Authorization: token $GITHUB_TOKEN" \
            -H "Content-Type: application/zip" \
            --data-binary @"$zip_file" \
            "https://uploads.github.com/repos/${{ github.repository }}/releases/$release_id/assets?name=$(basename $zip_file)"

      - name: Install rclone
        run: |
          curl -fsSL https://rclone.org/install.sh | sudo bash

      - name: Configure rclone for Cloudflare R2
        env:
          R2_ACCESS_KEY: ${{ secrets.R2_ACCESS_KEY }}
          R2_SECRET_KEY: ${{ secrets.R2_SECRET_KEY }}
        run: |
          mkdir -p ~/.config/rclone
          echo "[cloudflare_r2]" > ~/.config/rclone/rclone.conf
          echo "type = s3" >> ~/.config/rclone/rclone.conf
          echo "provider = Cloudflare" >> ~/.config/rclone/rclone.conf
          echo "access_key_id = $R2_ACCESS_KEY" >> ~/.config/rclone/rclone.conf
          echo "secret_access_key = $R2_SECRET_KEY" >> ~/.config/rclone/rclone.conf
          echo "endpoint = https://fb5f7d31bedfe4f3538ddfa6db491962.r2.cloudflarestorage.com" >> ~/.config/rclone/rclone.conf
          
      - name: Upload Artifacts to Cloudflare R2
        env:
          R2_BUCKET: "spooksapi"
          R2_PATH: "GhostESPBins"
        run: |
          rclone copy packaged_artifacts "cloudflare_r2:${R2_BUCKET}/${R2_PATH}" --progress

      - name: Notify Discord of Successful Release
        if: success()
        env:
          DISCORD_WEBHOOK_URL: ${{ secrets.DISCORD_WEBHOOK_URL }}
        run: |
          payload=$(cat <<EOF
          {
            "embeds": [
              {
                "title": "🎉 New Release for Ghost ESP!",
                "description": "A new release for Ghost ESP has been successfully compiled and is now available! Check out the latest release for details.",
                "url": "${{ github.server_url }}/${{ github.repository }}/releases/latest",
                "color": 5814783,
                "fields": [
                  {
                    "name": "Repository",
                    "value": "${{ github.repository }}",
                    "inline": true
                  },
                  {
                    "name": "Version",
                    "value": "${{ github.event.release.tag_name }}",
                    "inline": true
                  },
                  {
                    "name": "Commit",
                    "value": "${{ github.sha }}",
                    "inline": true
                  }
                ],
                "footer": {
                  "text": "GitHub Actions Bot",
                  "icon_url": "https://github.githubassets.com/images/modules/logos_page/GitHub-Mark.png"
                },
                "timestamp": "$(date -u +"%Y-%m-%dT%H:%M:%SZ")"
              }
            ]
          }
          EOF
          )
          
          curl -X POST \
            -H "Content-Type: application/json" \
            -d "$payload" \
            "$DISCORD_WEBHOOK_URL"