How to disable acceleration control

[Pippisbruffi]

I've set my gcode flavour to Klipper and, as expected, enabling or disabling "emit_machine_limits_to_gcode" does nothing. Either way, when I slice an object, I see that some commands like "SET_VELOCITY_LIMIT" are written in the gcode. I don't want that, I want Klipper to manage acceleration by itself. What can I do?

[vgdh]

set default acceleration to zero in speed section

[vgdh]

You can find it in speed section, scroll down until you see acceleration settings
now days it named "normal printing"

[afiskon]

It doesn't seem to do what expected. I tried to follow this article https://www.klipper3d.org/Pressure_Advance.html when I set acceleration control for "normal printing" to zero and my printing speed is 100 mm/s the walls of the model are still printed at ~67 mm/s. I checked other settings including volumetric speed for the nozzle etc. No matter what I do I don't see a way to print the walls at 100 mm/s which I believe is what the test wants. So some smart acceleration control seems to be left.

(I know that Orca has a similar test build-in but I don't like it because one-layer mouse ears the tower has are difficult to remove from my PEI build plate - they are left when I lift the model and I have to scratch the build plate for a long time. No such problem with the model on the Klipper web site.)

[afiskon]

[afiskon]

Orca version is 2.2.0

[afiskon]

Never mind I've found the setting that slowed everything down!