PRINT_END doesn't work

[3D-Frank]

Hi!
I have now made the first test prints and I am very satisfied. Unfortunately, I have a hopefully solvable problem. After printing, the print head remains on the object instead of executing the Print_End command. The message in the console is: Unknown command:"PRINT_END".
I think I set everything up like in SuperSlicer and it works there.

Thank you for your support!

[erebus04]

@3D-Frank The variables here are different than in Super Slicer.

[bed_temperature_initial_layer_single]
[nozzle_temperature_initial_layer]

This is from miy Klipper Maschine

[3D-Frank]

Thanks! I can test that, but your end g-code is no different. My settings in the SuperSlicer are based on the input of the 3D CrydTeam and they are experts when it comes to clippers etc. As I said: In the SuperSlicer it works without any problems

[erebus04]

That may be, but the clipper Gcode for end is END_PRINT in the default

[SoftFever]

Can you attach your g-code?
As far as I can see from the gcode generated on my side and my test, there is no issue.
You may want to double-check what's the macro name you defined in you Klipper.

[3D-Frank]

Hello and thanks for your help!
I added the "M117 Print End" G-code yesterday and that seems to be working. As I said: In the SuperSlicer it only works "Print_End". I am sending you two G-Code test files with and without "M117 Print End" and my Klipper Macro.cfg
macros.txt
Test_Gcode_only_Print_End.txt
Test_Gcode_M117 End Print & Print_End.txt

[3D-Frank]

Hello and thanks for your help!
I added the "M117 Print End" G-code yesterday and that seems to be working. As I said: In the SuperSlicer it only works "Print_End". I am sending you two G-Code test files with and without "M117 Print End" and my Klipper Macro.cfg
macros.txt
Test_Gcode_only_Print_End.txt
Test_Gcode_M117 End Print & Print_End.txt

[erebus04]

Hi, in Your Macro File, the End Macro have Named END_PRINT.

This are the right gcode to put in the Slicer. Look at my Screenshot above.

[3D-Frank]

Thanks for your enlightenment!
A small mistake with a big effect

[erebus04]

No Problem,
You are welcome