Send print job to multiple printers

[gasprints]

I have two BL P1P printers and it would be awesome for batch printing if i could send the same slice to both printers at the same time or possibly in a queue where multiple printers could be selected. It would be handy for the Klipper/OctoPrint users that are set up to push the print to the device and then start it as well.

[buckeyestargazer]

Just bumping this up as I'd like to see it too.

[demosthenes384322]

Bumping this since I want it to. Most of my prints go to at least two printers at once

[Aurasphere-au]

Same

[0x0172]

We have 4 printers at work and they all have to print the same things and the AMS is set up in the same way. It is a pain to manually upload the same print to each printer. I am not looking forward to the future with 10 or more printers ;)

Please add this feature. There are comments on the bambu lab forum and on github requesting this feature since two years.
Bambu Request
Github Request

Unfortunately an update made this procedure even worse. After uploading to one printer there was a cancel button, so the program wont jump to the device page. This button was now removed. I dont want to see the device page, i want to start the next printer. Or even better, the slicer starts all selected machines.

EDIT:
I found the feature just now, thank you very much :)

For all that are still searching:
https://www.youtube.com/watch?v=TSiSmRPilQc

[Aurasphere-au]

You could use autohotkey as a workaround in the meantime

…

On Tue, 5 Nov 2024, 10:25 pm 0x0172, ***@***.***> wrote: We have 4 printers at work and they all have to print the same things and the AMS is set up in the same way. It is a pain to manually upload the same print to each printer. I am not looking forward to the future with 10 or more printers ;) Please add this feature. There are comments on the bambu lab forum and on github requesting this feature since two years. Bambu Request <https://forum.bambulab.com/t/bambu-please-add-a-send-to-all-printers-button/3271> Github Request <bambulab/BambuStudio#2379> Unfortunately an update made this procedure even worse. After uploading to one printer there was a cancel button, so the program wont jump to the device page. This button was now removed. I dont want to see the device page, i want to start the next printer. Or even better, the slicer starts all selected machines. — Reply to this email directly, view it on GitHub <#1101 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BEKMSSX24QVO3HGTPYO3Z2DZ7CTLPAVCNFSM6AAAAABP3VBOVGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJVGM3DQNQ> . You are receiving this because you commented.Message ID: ***@***.***>