diff --git a/resources/profiles/Qidi.json b/resources/profiles/Qidi.json index 25d60ee197f..9f84a8eb789 100644 --- a/resources/profiles/Qidi.json +++ b/resources/profiles/Qidi.json @@ -42,6 +42,70 @@ "name": "fdm_process_qidi_x3_common", "sub_path": "process/fdm_process_qidi_x3_common.json" }, + { + "name": "fdm_process_QIDI_0.06_nozzle_0.2", + "sub_path": "process/fdm_process_QIDI_0.06_nozzle_0.2.json" + }, + { + "name": "fdm_process_QIDI_0.08_nozzle_0.2", + "sub_path": "process/fdm_process_QIDI_0.08_nozzle_0.2.json" + }, + { + "name": "fdm_process_QIDI_0.10_nozzle_0.2", + "sub_path": "process/fdm_process_QIDI_0.10_nozzle_0.2.json" + }, + { + "name": "fdm_process_QIDI_0.12_nozzle_0.2", + "sub_path": "process/fdm_process_QIDI_0.12_nozzle_0.2.json" + }, + { + "name": "fdm_process_QIDI_0.14_nozzle_0.2", + "sub_path": "process/fdm_process_QIDI_0.14_nozzle_0.2.json" + }, + { + "name": "fdm_process_QIDI_0.18_nozzle_0.6", + "sub_path": "process/fdm_process_QIDI_0.18_nozzle_0.6.json" + }, + { + "name": "fdm_process_QIDI_0.24_nozzle_0.6", + "sub_path": "process/fdm_process_QIDI_0.24_nozzle_0.6.json" + }, + { + "name": "fdm_process_QIDI_0.30_nozzle_0.6", + "sub_path": "process/fdm_process_QIDI_0.30_nozzle_0.6.json" + }, + { + "name": "fdm_process_QIDI_0.36_nozzle_0.6", + "sub_path": "process/fdm_process_QIDI_0.36_nozzle_0.6.json" + }, + { + "name": "fdm_process_QIDI_0.42_nozzle_0.6", + "sub_path": "process/fdm_process_QIDI_0.42_nozzle_0.6.json" + }, + { + "name": "fdm_process_QIDI_0.24_nozzle_0.8", + "sub_path": "process/fdm_process_QIDI_0.24_nozzle_0.8.json" + }, + { + "name": "fdm_process_QIDI_0.32_nozzle_0.8", + "sub_path": "process/fdm_process_QIDI_0.32_nozzle_0.8.json" + }, + { + "name": "fdm_process_QIDI_0.40_nozzle_0.8", + "sub_path": "process/fdm_process_QIDI_0.40_nozzle_0.8.json" + }, + { + "name": "fdm_process_QIDI_0.48_nozzle_0.8", + "sub_path": "process/fdm_process_QIDI_0.48_nozzle_0.8.json" + }, + { + "name": "fdm_process_QIDI_0.56_nozzle_0.8", + "sub_path": "process/fdm_process_QIDI_0.56_nozzle_0.8.json" + }, + { + "name": "0.12mm Fine @Qidi X3", + "sub_path": "process/0.12mm Fine @Qidi X3.json" + }, { "name": "0.12mm Fine @Qidi XMPlus", "sub_path": "process/0.12mm Fine @Qidi XPlus.json" @@ -66,6 +130,10 @@ "name": "0.12mm Fine @Qidi XMax3", "sub_path": "process/0.12mm Fine @Qidi XMax3.json" }, + { + "name": "0.16mm Optimal @Qidi X3", + "sub_path": "process/0.16mm Optimal @Qidi X3.json" + }, { "name": "0.16mm Optimal @Qidi XPlus", "sub_path": "process/0.16mm Optimal @Qidi XPlus.json" @@ -89,6 +157,10 @@ { "name": "0.16mm Optimal @Qidi XMax3", "sub_path": "process/0.16mm Optimal @Qidi XMax3.json" + }, + { + "name": "0.20mm Standard @Qidi X3", + "sub_path": "process/0.20mm Standard @Qidi X3.json" }, { "name": "0.20mm Standard @Qidi XPlus", @@ -113,6 +185,10 @@ { "name": "0.20mm Standard @Qidi XMax3", "sub_path": "process/0.20mm Standard @Qidi XMax3.json" + }, + { + "name": "0.24mm Draft @Qidi X3", + "sub_path": "process/0.24mm Draft @Qidi X3.json" }, { "name": "0.25mm Draft @Qidi XPlus", @@ -127,16 +203,20 @@ "sub_path": "process/0.25mm Draft @Qidi XCFPro.json" }, { - "name": "0.25mm Draft @Qidi XSmart3", - "sub_path": "process/0.25mm Draft @Qidi XSmart3.json" + "name": "0.24mm Draft @Qidi XSmart3", + "sub_path": "process/0.24mm Draft @Qidi XSmart3.json" }, { - "name": "0.25mm Draft @Qidi XPlus3", - "sub_path": "process/0.25mm Draft @Qidi XPlus3.json" + "name": "0.24mm Draft @Qidi XPlus3", + "sub_path": "process/0.24mm Draft @Qidi XPlus3.json" }, { - "name": "0.25mm Draft @Qidi XMax3", - "sub_path": "process/0.25mm Draft @Qidi XMax3.json" + "name": "0.24mm Draft @Qidi XMax3", + "sub_path": "process/0.24mm Draft @Qidi XMax3.json" + }, + { + "name": "0.28mm Extra Draft @Qidi X3", + "sub_path": "process/0.28mm Extra Draft @Qidi X3.json" }, { "name": "0.30mm Extra Draft @Qidi XPlus", @@ -151,16 +231,196 @@ "sub_path": "process/0.30mm Extra Draft @Qidi XCFPro.json" }, { - "name": "0.30mm Extra Draft @Qidi XSmart3", - "sub_path": "process/0.30mm Extra Draft @Qidi XSmart3.json" + "name": "0.28mm Extra Draft @Qidi XSmart3", + "sub_path": "process/0.28mm Extra Draft @Qidi XSmart3.json" + }, + { + "name": "0.28mm Extra Draft @Qidi XPlus3", + "sub_path": "process/0.28mm Extra Draft @Qidi XPlus3.json" + }, + { + "name": "0.28mm Extra Draft @Qidi XMax3", + "sub_path": "process/0.28mm Extra Draft @Qidi XMax3.json" + }, + { + "name": "0.06mm Standard @Qidi XMax3 0.2 nozzle", + "sub_path": "process/0.06mm Standard @Qidi XMax3 0.2 nozzle.json" + }, + { + "name": "0.08mm Standard @Qidi XMax3 0.2 nozzle", + "sub_path": "process/0.08mm Standard @Qidi XMax3 0.2 nozzle.json" + }, + { + "name": "0.10mm Standard @Qidi XMax3 0.2 nozzle", + "sub_path": "process/0.10mm Standard @Qidi XMax3 0.2 nozzle.json" + }, + { + "name": "0.12mm Standard @Qidi XMax3 0.2 nozzle", + "sub_path": "process/0.12mm Standard @Qidi XMax3 0.2 nozzle.json" + }, + { + "name": "0.14mm Standard @Qidi XMax3 0.2 nozzle", + "sub_path": "process/0.14mm Standard @Qidi XMax3 0.2 nozzle.json" + }, + { + "name": "0.06mm Standard @Qidi XPlus3 0.2 nozzle", + "sub_path": "process/0.06mm Standard @Qidi XPlus3 0.2 nozzle.json" + }, + { + "name": "0.08mm Standard @Qidi XPlus3 0.2 nozzle", + "sub_path": "process/0.08mm Standard @Qidi XPlus3 0.2 nozzle.json" + }, + { + "name": "0.10mm Standard @Qidi XPlus3 0.2 nozzle", + "sub_path": "process/0.10mm Standard @Qidi XPlus3 0.2 nozzle.json" + }, + { + "name": "0.12mm Standard @Qidi XPlus3 0.2 nozzle", + "sub_path": "process/0.12mm Standard @Qidi XPlus3 0.2 nozzle.json" + }, + { + "name": "0.14mm Standard @Qidi XPlus3 0.2 nozzle", + "sub_path": "process/0.14mm Standard @Qidi XPlus3 0.2 nozzle.json" + }, + { + "name": "0.06mm Standard @Qidi XSmart3 0.2 nozzle", + "sub_path": "process/0.06mm Standard @Qidi XSmart3 0.2 nozzle.json" + }, + { + "name": "0.08mm Standard @Qidi XSmart3 0.2 nozzle", + "sub_path": "process/0.08mm Standard @Qidi XSmart3 0.2 nozzle.json" + }, + { + "name": "0.10mm Standard @Qidi XSmart3 0.2 nozzle", + "sub_path": "process/0.10mm Standard @Qidi XSmart3 0.2 nozzle.json" + }, + { + "name": "0.12mm Standard @Qidi XSmart3 0.2 nozzle", + "sub_path": "process/0.12mm Standard @Qidi XSmart3 0.2 nozzle.json" + }, + { + "name": "0.14mm Standard @Qidi XSmart3 0.2 nozzle", + "sub_path": "process/0.14mm Standard @Qidi XSmart3 0.2 nozzle.json" + }, + { + "name": "0.18mm Standard @Qidi XMax3 0.6 nozzle", + "sub_path": "process/0.18mm Standard @Qidi XMax3 0.6 nozzle.json" + }, + { + "name": "0.24mm Standard @Qidi XMax3 0.6 nozzle", + "sub_path": "process/0.24mm Standard @Qidi XMax3 0.6 nozzle.json" + }, + { + "name": "0.30mm Standard @Qidi XMax3 0.6 nozzle", + "sub_path": "process/0.30mm Standard @Qidi XMax3 0.6 nozzle.json" + }, + { + "name": "0.36mm Standard @Qidi XMax3 0.6 nozzle", + "sub_path": "process/0.36mm Standard @Qidi XMax3 0.6 nozzle.json" + }, + { + "name": "0.42mm Standard @Qidi XMax3 0.6 nozzle", + "sub_path": "process/0.42mm Standard @Qidi XMax3 0.6 nozzle.json" }, { - "name": "0.30mm Extra Draft @Qidi XPlus3", - "sub_path": "process/0.30mm Extra Draft @Qidi XPlus3.json" + "name": "0.18mm Standard @Qidi XPlus3 0.6 nozzle", + "sub_path": "process/0.18mm Standard @Qidi XPlus3 0.6 nozzle.json" }, { - "name": "0.30mm Extra Draft @Qidi XMax3", - "sub_path": "process/0.30mm Extra Draft @Qidi XMax3.json" + "name": "0.24mm Standard @Qidi XPlus3 0.6 nozzle", + "sub_path": "process/0.24mm Standard @Qidi XPlus3 0.6 nozzle.json" + }, + { + "name": "0.30mm Standard @Qidi XPlus3 0.6 nozzle", + "sub_path": "process/0.30mm Standard @Qidi XPlus3 0.6 nozzle.json" + }, + { + "name": "0.36mm Standard @Qidi XPlus3 0.6 nozzle", + "sub_path": "process/0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" + }, + { + "name": "0.42mm Standard @Qidi XPlus3 0.6 nozzle", + "sub_path": "process/0.42mm Standard @Qidi XPlus3 0.6 nozzle.json" + }, + { + "name": "0.18mm Standard @Qidi XSmart3 0.6 nozzle", + "sub_path": "process/0.18mm Standard @Qidi XSmart3 0.6 nozzle.json" + }, + { + "name": "0.24mm Standard @Qidi XSmart3 0.6 nozzle", + "sub_path": "process/0.24mm Standard @Qidi XSmart3 0.6 nozzle.json" + }, + { + "name": "0.30mm Standard @Qidi XSmart3 0.6 nozzle", + "sub_path": "process/0.30mm Standard @Qidi XSmart3 0.6 nozzle.json" + }, + { + "name": "0.36mm Standard @Qidi XSmart3 0.6 nozzle", + "sub_path": "process/0.36mm Standard @Qidi XSmart3 0.6 nozzle.json" + }, + { + "name": "0.42mm Standard @Qidi XSmart3 0.6 nozzle", + "sub_path": "process/0.42mm Standard @Qidi XSmart3 0.6 nozzle.json" + }, + { + "name": "0.24mm Standard @Qidi XMax3 0.8 nozzle", + "sub_path": "process/0.24mm Standard @Qidi XMax3 0.8 nozzle.json" + }, + { + "name": "0.32mm Standard @Qidi XMax3 0.8 nozzle", + "sub_path": "process/0.32mm Standard @Qidi XMax3 0.8 nozzle.json" + }, + { + "name": "0.40mm Standard @Qidi XMax3 0.8 nozzle", + "sub_path": "process/0.40mm Standard @Qidi XMax3 0.8 nozzle.json" + }, + { + "name": "0.48mm Standard @Qidi XMax3 0.8 nozzle", + "sub_path": "process/0.48mm Standard @Qidi XMax3 0.8 nozzle.json" + }, + { + "name": "0.56mm Standard @Qidi XMax3 0.8 nozzle", + "sub_path": "process/0.56mm Standard @Qidi XMax3 0.8 nozzle.json" + }, + { + "name": "0.24mm Standard @Qidi XPlus3 0.8 nozzle", + "sub_path": "process/0.24mm Standard @Qidi XPlus3 0.8 nozzle.json" + }, + { + "name": "0.32mm Standard @Qidi XPlus3 0.8 nozzle", + "sub_path": "process/0.32mm Standard @Qidi XPlus3 0.8 nozzle.json" + }, + { + "name": "0.40mm Standard @Qidi XPlus3 0.8 nozzle", + "sub_path": "process/0.40mm Standard @Qidi XPlus3 0.8 nozzle.json" + }, + { + "name": "0.48mm Standard @Qidi XPlus3 0.8 nozzle", + "sub_path": "process/0.48mm Standard @Qidi XPlus3 0.8 nozzle.json" + }, + { + "name": "0.56mm Standard @Qidi XPlus3 0.8 nozzle", + "sub_path": "process/0.56mm Standard @Qidi XPlus3 0.8 nozzle.json" + }, + { + "name": "0.24mm Standard @Qidi XSmart3 0.8 nozzle", + "sub_path": "process/0.24mm Standard @Qidi XSmart3 0.8 nozzle.json" + }, + { + "name": "0.32mm Standard @Qidi XSmart3 0.8 nozzle", + "sub_path": "process/0.32mm Standard @Qidi XSmart3 0.8 nozzle.json" + }, + { + "name": "0.40mm Standard @Qidi XSmart3 0.8 nozzle", + "sub_path": "process/0.40mm Standard @Qidi XSmart3 0.8 nozzle.json" + }, + { + "name": "0.48mm Standard @Qidi XSmart3 0.8 nozzle", + "sub_path": "process/0.48mm Standard @Qidi XSmart3 0.8 nozzle.json" + }, + { + "name": "0.56mm Standard @Qidi XSmart3 0.8 nozzle", + "sub_path": "process/0.56mm Standard @Qidi XSmart3 0.8 nozzle.json" } ], "filament_list": [ @@ -245,21 +505,49 @@ "sub_path": "filament/Qidi Generic PVA.json" }, { - "name": "Qidi Generic TPU 95A", - "sub_path": "filament/Qidi Generic TPU 95A.json" + "name": "Qidi TPU 95A-HF", + "sub_path": "filament/Qidi TPU 95A-HF.json" }, { "name": "QIDI ABS Rapido", "sub_path": "filament/QIDI ABS Rapido.json" }, + { + "name": "QIDI ABS Rapido 0.2 nozzle", + "sub_path": "filament/QIDI ABS Rapido 0.2 nozzle.json" + }, + { + "name": "QIDI ABS Rapido 0.8 nozzle", + "sub_path": "filament/QIDI ABS Rapido 0.8 nozzle.json" + }, { "name": "QIDI PLA Rapido", "sub_path": "filament/QIDI PLA Rapido.json" }, + { + "name": "QIDI PLA Rapido 0.2 nozzle", + "sub_path": "filament/QIDI PLA Rapido 0.2 nozzle.json" + }, + { + "name": "QIDI PLA Rapido 0.8 nozzle", + "sub_path": "filament/QIDI PLA Rapido 0.8 nozzle.json" + }, { "name": "QIDI PETG Tough", "sub_path": "filament/QIDI PETG Tough.json" }, + { + "name": "QIDI PETG Tough 0.2 nozzle", + "sub_path": "filament/QIDI PETG Tough 0.2 nozzle.json" + }, + { + "name": "QIDI PETG Tough 0.6 nozzle", + "sub_path": "filament/QIDI PETG Tough 0.6 nozzle.json" + }, + { + "name": "QIDI PETG Tough 0.8 nozzle", + "sub_path": "filament/QIDI PETG Tough 0.8 nozzle.json" + }, { "name": "QIDI PET-CF", "sub_path": "filament/QIDI PET-CF.json" @@ -279,6 +567,14 @@ { "name": "QIDI PA-Ultra", "sub_path": "filament/QIDI PA-Ultra.json" + }, + { + "name": "Tinmorry PETG-ECO", + "sub_path": "filament/Tinmorry PETG-ECO.json" + }, + { + "name": "Qidi Generic TPU", + "sub_path": "filament/Qidi Generic TPU.json" } ], @@ -318,6 +614,42 @@ { "name": "Qidi X-Max 3 0.4 nozzle", "sub_path": "machine/Qidi X-Max 3 0.4 nozzle.json" + }, + { + "name": "Qidi X-Smart 3 0.6 nozzle", + "sub_path": "machine/Qidi X-Smart 3 0.6 nozzle.json" + }, + { + "name": "Qidi X-Plus 3 0.6 nozzle", + "sub_path": "machine/Qidi X-Plus 3 0.6 nozzle.json" + }, + { + "name": "Qidi X-Max 3 0.6 nozzle", + "sub_path": "machine/Qidi X-Max 3 0.6 nozzle.json" + }, + { + "name": "Qidi X-Smart 3 0.8 nozzle", + "sub_path": "machine/Qidi X-Smart 3 0.8 nozzle.json" + }, + { + "name": "Qidi X-Plus 3 0.8 nozzle", + "sub_path": "machine/Qidi X-Plus 3 0.8 nozzle.json" + }, + { + "name": "Qidi X-Max 3 0.8 nozzle", + "sub_path": "machine/Qidi X-Max 3 0.8 nozzle.json" + }, + { + "name": "Qidi X-Smart 3 0.2 nozzle", + "sub_path": "machine/Qidi X-Smart 3 0.2 nozzle.json" + }, + { + "name": "Qidi X-Plus 3 0.2 nozzle", + "sub_path": "machine/Qidi X-Plus 3 0.2 nozzle.json" + }, + { + "name": "Qidi X-Max 3 0.2 nozzle", + "sub_path": "machine/Qidi X-Max 3 0.2 nozzle.json" } ] } diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.2 nozzle.json new file mode 100644 index 00000000000..a21c9916805 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.2 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "QIDI ABS Rapido 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs", + "filament_flow_ratio": [ + "0.926" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.021" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_start_gcode": [ + "; filament start gcode\nM141 S55\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" + ], + "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.8 nozzle.json new file mode 100644 index 00000000000..bdf3771f109 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido 0.8 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "QIDI ABS Rapido 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs", + "filament_flow_ratio": [ + "0.926" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.021" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "nozzle_temperature": [ + "260" + ], + "slow_down_min_speed": [ + "10" + ], + "filament_start_gcode": [ + "; filament start gcode\nM141 S55\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" + ], + "compatible_printers": [ + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido.json index e125aaa6a0b..d95e9ef3edb 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS Rapido.json +++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido.json @@ -17,6 +17,9 @@ ], "pressure_advance": [ "0.021" + ], + "filament_start_gcode": [ + "; filament start gcode\nM141 S55\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", @@ -24,6 +27,12 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF25.json b/resources/profiles/Qidi/filament/QIDI ABS-GF25.json index 3b22d2601fc..ab58f34e8f0 100644 --- a/resources/profiles/Qidi/filament/QIDI ABS-GF25.json +++ b/resources/profiles/Qidi/filament/QIDI ABS-GF25.json @@ -7,7 +7,7 @@ "instantiation": "true", "inherits": "fdm_filament_abs", "filament_flow_ratio": [ - "0.926" + "0.8" ], "filament_max_volumetric_speed": [ "15" @@ -16,7 +16,22 @@ "1" ], "pressure_advance": [ - "0.001" + "0.01" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature": [ + "270" + ], + "filament_start_gcode": [ + "; filament start gcode\nM141 S55\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", @@ -24,6 +39,17 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra.json index ed1d5123e5b..0f96bbbfd2d 100644 --- a/resources/profiles/Qidi/filament/QIDI PA-Ultra.json +++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra.json @@ -16,7 +16,7 @@ "280" ], "filament_max_volumetric_speed": [ - "6" + "3" ], "enable_pressure_advance": [ "1" @@ -30,6 +30,17 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", +"Qidi X-Smart 3 0.8 nozzle", +"Qidi X-Plus 3 0.8 nozzle", +"Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/QIDI PA12-CF.json b/resources/profiles/Qidi/filament/QIDI PA12-CF.json index 04a9404777a..08f55efc1f4 100644 --- a/resources/profiles/Qidi/filament/QIDI PA12-CF.json +++ b/resources/profiles/Qidi/filament/QIDI PA12-CF.json @@ -34,7 +34,7 @@ "5" ], "full_fan_speed_layer": [ - "2" + "3" ], "enable_pressure_advance": [ "1" @@ -48,6 +48,17 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", +"Qidi X-Smart 3 0.8 nozzle", +"Qidi X-Plus 3 0.8 nozzle", +"Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF.json index 9191f9c34b9..a004038980c 100644 --- a/resources/profiles/Qidi/filament/QIDI PAHT-CF.json +++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF.json @@ -9,30 +9,6 @@ "filament_type": [ "PA-CF" ], - "cool_plate_temp" : [ - "80" - ], - "eng_plate_temp" : [ - "80" - ], - "hot_plate_temp" : [ - "80" - ], - "textured_plate_temp" : [ - "80" - ], - "cool_plate_temp_initial_layer" : [ - "80" - ], - "eng_plate_temp_initial_layer" : [ - "80" - ], - "hot_plate_temp_initial_layer" : [ - "80" - ], - "textured_plate_temp_initial_layer" : [ - "08" - ], "nozzle_temperature_initial_layer": [ "310" ], @@ -72,6 +48,17 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", +"Qidi X-Smart 3 0.8 nozzle", +"Qidi X-Plus 3 0.8 nozzle", +"Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/QIDI PET-CF.json b/resources/profiles/Qidi/filament/QIDI PET-CF.json index c41e9405215..c27f725f1d6 100644 --- a/resources/profiles/Qidi/filament/QIDI PET-CF.json +++ b/resources/profiles/Qidi/filament/QIDI PET-CF.json @@ -9,30 +9,6 @@ "filament_type": [ "PA-CF" ], - "cool_plate_temp" : [ - "80" - ], - "eng_plate_temp" : [ - "80" - ], - "hot_plate_temp" : [ - "80" - ], - "textured_plate_temp" : [ - "80" - ], - "cool_plate_temp_initial_layer" : [ - "80" - ], - "eng_plate_temp_initial_layer" : [ - "80" - ], - "hot_plate_temp_initial_layer" : [ - "80" - ], - "textured_plate_temp_initial_layer" : [ - "08" - ], "nozzle_temperature_initial_layer": [ "320" ], @@ -58,7 +34,7 @@ "5" ], "full_fan_speed_layer": [ - "2" + "3" ], "enable_pressure_advance": [ "1" @@ -72,6 +48,17 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", +"Qidi X-Smart 3 0.8 nozzle", +"Qidi X-Plus 3 0.8 nozzle", +"Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.2 nozzle.json new file mode 100644 index 00000000000..de315e82433 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.2 nozzle.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "filament_id": "GFG99", + "setting_id": "GFSG99", + "name": "QIDI PETG Tough 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet", + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_flow_ratio": [ + "0.95" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.05" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.6 nozzle.json new file mode 100644 index 00000000000..3b938eb9d71 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.6 nozzle.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "filament_id": "GFG99", + "setting_id": "GFSG99", + "name": "QIDI PETG Tough 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet", + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_flow_ratio": [ + "0.95" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.05" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "compatible_printers": [ + "Qidi X-Plus 0.6 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.8 nozzle.json new file mode 100644 index 00000000000..8b2f70e6fe1 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough 0.8 nozzle.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "filament_id": "GFG99", + "setting_id": "GFSG99", + "name": "QIDI PETG Tough 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet", + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_flow_ratio": [ + "0.95" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.05" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "compatible_printers": [ + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough.json b/resources/profiles/Qidi/filament/QIDI PETG Tough.json index 8975704dad7..ece242d1351 100644 --- a/resources/profiles/Qidi/filament/QIDI PETG Tough.json +++ b/resources/profiles/Qidi/filament/QIDI PETG Tough.json @@ -28,7 +28,7 @@ "40" ], "slow_down_min_speed": [ - "10" + "20" ], "slow_down_layer_time": [ "8" @@ -43,7 +43,7 @@ "1" ], "pressure_advance": [ - "0.07" + "0.05" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.2 nozzle.json new file mode 100644 index 00000000000..216b98c41e7 --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.2 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI PLA Rapido 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.98" + ], + "slow_down_layer_time": [ + "5" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.031" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Qidi X-Plus 0.2 nozzle", + "Qidi X-Max 0.2 nozzle", + "Qidi X-CF Pro 0.2 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.8 nozzle.json new file mode 100644 index 00000000000..55615fd03dc --- /dev/null +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido 0.8 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI PLA Rapido 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.98" + ], + "slow_down_layer_time": [ + "5" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.031" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "compatible_printers": [ + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido.json index 302d1c5bd41..01b9e83e452 100644 --- a/resources/profiles/Qidi/filament/QIDI PLA Rapido.json +++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido.json @@ -13,7 +13,7 @@ "20" ], "slow_down_layer_time": [ - "8" + "5" ], "enable_pressure_advance": [ "1" @@ -27,6 +27,12 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Plus 0.6 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic ABS.json b/resources/profiles/Qidi/filament/Qidi Generic ABS.json index e26a75a5961..3d6b21c1740 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ABS.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ABS.json @@ -18,6 +18,20 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic ASA.json b/resources/profiles/Qidi/filament/Qidi Generic ASA.json index bd94a626356..22669bde4f6 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic ASA.json +++ b/resources/profiles/Qidi/filament/Qidi Generic ASA.json @@ -11,13 +11,42 @@ ], "filament_flow_ratio": [ "0.926" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature": [ + "270" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.021" + ], + "filament_start_gcode": [ + "; filament start gcode\nM141 S55\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", - "Qidi X-Smart 3 0.4 nozzle", - "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic PA-CF.json b/resources/profiles/Qidi/filament/Qidi Generic PA-CF.json index 9b3eb6850af..e61722e25fc 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PA-CF.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PA-CF.json @@ -40,8 +40,19 @@ "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", - "Qidi X-Smart 3 0.4 nozzle", - "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", +"Qidi X-Smart 3 0.8 nozzle", +"Qidi X-Plus 3 0.8 nozzle", +"Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic PA.json b/resources/profiles/Qidi/filament/Qidi Generic PA.json index ba9737eaf66..3e39fa7152e 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PA.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PA.json @@ -18,12 +18,26 @@ "filament_max_volumetric_speed": [ "16" ], + "filament_start_gcode": [ + "; filament start gcode\nM141 S55\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" + ], "compatible_printers": [ - "Qidi X-Plus 0.4 nozzle", - "Qidi X-Max 0.4 nozzle", - "Qidi X-CF Pro 0.4 nozzle", - "Qidi X-Smart 3 0.4 nozzle", - "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Plus 0.4 nozzle", + "Qidi X-Max 0.4 nozzle", + "Qidi X-CF Pro 0.4 nozzle", +"Qidi X-Smart 3 0.4 nozzle", +"Qidi X-Plus 3 0.4 nozzle", +"Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", +"Qidi X-Smart 3 0.6 nozzle", +"Qidi X-Plus 3 0.6 nozzle", +"Qidi X-Max 3 0.6 nozzle", +"Qidi X-Plus 0.8 nozzle", +"Qidi X-Max 0.8 nozzle", +"Qidi X-CF Pro 0.8 nozzle", +"Qidi X-Smart 3 0.8 nozzle", +"Qidi X-Plus 3 0.8 nozzle", +"Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic PC.json b/resources/profiles/Qidi/filament/Qidi Generic PC.json index b7fc0556657..feb87720067 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PC.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PC.json @@ -12,13 +12,26 @@ "filament_flow_ratio": [ "0.94" ], - + "filament_start_gcode": [ + "; filament start gcode\nM141 S55\n{if (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}" + ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic PETG-CF.json b/resources/profiles/Qidi/filament/Qidi Generic PETG-CF.json index 3156dd5ce8c..6bdeba66075 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PETG-CF.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PETG-CF.json @@ -43,7 +43,7 @@ "40" ], "filament_vendor": [ - "Bambu Lab" + "Other brand" ], "filament_type": [ "PETG-CF" @@ -52,13 +52,13 @@ "240" ], "nozzle_temperature_range_high": [ - "270" + "290" ], "nozzle_temperature_initial_layer": [ - "255" + "280" ], "nozzle_temperature": [ - "255" + "280" ], "filament_cost": [ "34.99" @@ -66,27 +66,47 @@ "filament_density": [ "1.25" ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "0" - ], "filament_max_volumetric_speed": [ - "10" + "8" ], "slow_down_layer_time": [ "6" ], - "fan_cooling_layer_time": [ - "20" - ], + "enable_pressure_advance": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.95" + ], + "pressure_advance": [ + "0.05" + ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", "Qidi X-Max 0.4 nozzle", "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/filament/Qidi Generic PETG.json b/resources/profiles/Qidi/filament/Qidi Generic PETG.json index 3d0e8a41b87..39d3c34e886 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PETG.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PETG.json @@ -37,7 +37,7 @@ "0.95" ], "filament_max_volumetric_speed": [ - "10" + "9" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", @@ -45,6 +45,20 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA Silk.json b/resources/profiles/Qidi/filament/Qidi Generic PLA Silk.json index c5a13aad28b..06785f9d5d1 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA Silk.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA Silk.json @@ -24,6 +24,20 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA-CF.json b/resources/profiles/Qidi/filament/Qidi Generic PLA-CF.json index 6699488d6aa..1cf2951a0b0 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA-CF.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA-CF.json @@ -39,6 +39,17 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/filament/Qidi Generic PLA.json b/resources/profiles/Qidi/filament/Qidi Generic PLA.json index c3cb3c740af..414a4a65571 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PLA.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PLA.json @@ -13,7 +13,7 @@ "15" ], "slow_down_layer_time": [ - "8" + "5" ], "compatible_printers": [ "Qidi X-Plus 0.4 nozzle", @@ -21,6 +21,20 @@ "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle" ] } diff --git a/resources/profiles/Qidi/filament/Qidi Generic PVA.json b/resources/profiles/Qidi/filament/Qidi Generic PVA.json index 2b22529b748..6f8ea03d6e8 100644 --- a/resources/profiles/Qidi/filament/Qidi Generic PVA.json +++ b/resources/profiles/Qidi/filament/Qidi Generic PVA.json @@ -19,11 +19,25 @@ "10" ], "compatible_printers": [ - "Qidi X-Plus 0.4 nozzle", - "Qidi X-Max 0.4 nozzle", - "Qidi X-CF Pro 0.4 nozzle", + "Qidi X-Plus 0.4 nozzle", + "Qidi X-Max 0.4 nozzle", + "Qidi X-CF Pro 0.4 nozzle", "Qidi X-Smart 3 0.4 nozzle", "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Qidi/filament/Qidi Generic TPU 95A.json b/resources/profiles/Qidi/filament/Qidi Generic TPU 95A.json deleted file mode 100644 index 15e1da22b8a..00000000000 --- a/resources/profiles/Qidi/filament/Qidi Generic TPU 95A.json +++ /dev/null @@ -1,26 +0,0 @@ -{ - "type": "filament", - "filament_id": "GFU99", - "setting_id": "GFSR99", - "name": "Qidi Generic TPU", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_tpu", - "filament_max_volumetric_speed": [ - "6" - ], - "enable_pressure_advance": [ - "1" - ], - "pressure_advance": [ - "0.25" - ], - "compatible_printers": [ - "Qidi X-Plus 0.4 nozzle", - "Qidi X-Max 0.4 nozzle", - "Qidi X-CF Pro 0.4 nozzle", - "Qidi X-Smart 3 0.4 nozzle", - "Qidi X-Plus 3 0.4 nozzle", - "Qidi X-Max 3 0.4 nozzle" - ] -} diff --git a/resources/profiles/Qidi/filament/Qidi Generic TPU.json b/resources/profiles/Qidi/filament/Qidi Generic TPU.json new file mode 100644 index 00000000000..d6e4e4d6115 --- /dev/null +++ b/resources/profiles/Qidi/filament/Qidi Generic TPU.json @@ -0,0 +1,43 @@ +{ + "type": "filament", + "filament_id": "GFU99", + "setting_id": "GFSR99", + "name": "Qidi Generic TPU", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_tpu", + "filament_max_volumetric_speed": [ + "3" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.1" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature": [ + "230" + ], + "compatible_printers": [ + "Qidi X-Plus 0.4 nozzle", + "Qidi X-Max 0.4 nozzle", + "Qidi X-CF Pro 0.4 nozzle", + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/Qidi TPU 95A-HF.json b/resources/profiles/Qidi/filament/Qidi TPU 95A-HF.json new file mode 100644 index 00000000000..16a993f200e --- /dev/null +++ b/resources/profiles/Qidi/filament/Qidi TPU 95A-HF.json @@ -0,0 +1,43 @@ +{ + "type": "filament", + "filament_id": "GFU99", + "setting_id": "GFSR99", + "name": "Qidi TPU 95A-HF", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_tpu", + "filament_max_volumetric_speed": [ + "6" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.1" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature": [ + "230" + ], + "compatible_printers": [ + "Qidi X-Plus 0.4 nozzle", + "Qidi X-Max 0.4 nozzle", + "Qidi X-CF Pro 0.4 nozzle", + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Max 0.6 nozzle", + "Qidi X-CF Pro 0.6 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Plus 0.8 nozzle", + "Qidi X-Max 0.8 nozzle", + "Qidi X-CF Pro 0.8 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/Tinmorry PETG-ECO.json b/resources/profiles/Qidi/filament/Tinmorry PETG-ECO.json new file mode 100644 index 00000000000..de9e5164faa --- /dev/null +++ b/resources/profiles/Qidi/filament/Tinmorry PETG-ECO.json @@ -0,0 +1,95 @@ +{ + "type": "filament", + "filament_id": "GFG99", + "setting_id": "GFSG99", + "name": "Tinmorry PETG-ECO", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet", + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.042" + ], + "nozzle_temperature_initial_layer": [ + "235" + ], + "nozzle_temperature": [ + "235" + ], + "cool_plate_temp" : [ + "70" + ], + "eng_plate_temp" : [ + "70" + ], + "hot_plate_temp" : [ + "70" + ], + "textured_plate_temp" : [ + "70" + ], + "cool_plate_temp_initial_layer" : [ + "70" + ], + "eng_plate_temp_initial_layer" : [ + "70" + ], + "hot_plate_temp_initial_layer" : [ + "70" + ], + "textured_plate_temp_initial_layer" : [ + "70" + ], + "compatible_printers": [ + "Qidi X-Plus 0.4 nozzle", + "Qidi X-Max 0.4 nozzle", + "Qidi X-CF Pro 0.4 nozzle", + "Qidi X-Smart 3 0.4 nozzle", + "Qidi X-Plus 3 0.4 nozzle", + "Qidi X-Max 3 0.4 nozzle", + "Qidi X-Smart 3 0.2 nozzle", + "Qidi X-Plus 3 0.2 nozzle", + "Qidi X-Max 3 0.2 nozzle", + "Qidi X-Smart 3 0.6 nozzle", + "Qidi X-Plus 3 0.6 nozzle", + "Qidi X-Max 3 0.6 nozzle", + "Qidi X-Smart 3 0.8 nozzle", + "Qidi X-Plus 3 0.8 nozzle", + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/filament/fdm_filament_abs.json b/resources/profiles/Qidi/filament/fdm_filament_abs.json index d8237ef8390..ed997e0881d 100644 --- a/resources/profiles/Qidi/filament/fdm_filament_abs.json +++ b/resources/profiles/Qidi/filament/fdm_filament_abs.json @@ -56,10 +56,10 @@ "1" ], "fan_max_speed": [ - "35" + "50" ], "fan_min_speed": [ - "35" + "20" ], "overhang_fan_threshold": [ "25%" @@ -68,10 +68,10 @@ "80" ], "nozzle_temperature": [ - "260" + "270" ], "temperature_vitrification": [ - "110" + "100" ], "nozzle_temperature_range_low": [ "240" @@ -83,6 +83,6 @@ "10" ], "slow_down_layer_time": [ - "3" + "5" ] } diff --git a/resources/profiles/Qidi/filament/fdm_filament_asa.json b/resources/profiles/Qidi/filament/fdm_filament_asa.json index 850d5d57a17..92d549afcd3 100644 --- a/resources/profiles/Qidi/filament/fdm_filament_asa.json +++ b/resources/profiles/Qidi/filament/fdm_filament_asa.json @@ -5,28 +5,28 @@ "instantiation": "false", "inherits": "fdm_filament_common", "cool_plate_temp" : [ - "95" + "90" ], "eng_plate_temp" : [ - "95" + "90" ], "hot_plate_temp" : [ - "95" + "90" ], "textured_plate_temp" : [ - "95" + "90" ], "cool_plate_temp_initial_layer" : [ - "95" + "90" ], "eng_plate_temp_initial_layer" : [ - "95" + "90" ], "hot_plate_temp_initial_layer" : [ - "95" + "90" ], "textured_plate_temp_initial_layer" : [ - "95" + "90" ], "slow_down_for_layer_cooling": [ "1" @@ -56,10 +56,10 @@ "1" ], "fan_max_speed": [ - "35" + "50" ], "fan_min_speed": [ - "35" + "10" ], "overhang_fan_threshold": [ "25%" @@ -68,7 +68,7 @@ "80" ], "nozzle_temperature": [ - "260" + "270" ], "temperature_vitrification": [ "100" diff --git a/resources/profiles/Qidi/filament/fdm_filament_common.json b/resources/profiles/Qidi/filament/fdm_filament_common.json index 73cc5f84ce2..ec1a0103f5c 100644 --- a/resources/profiles/Qidi/filament/fdm_filament_common.json +++ b/resources/profiles/Qidi/filament/fdm_filament_common.json @@ -100,7 +100,7 @@ "PLA" ], "filament_vendor": [ - "Generic" + "QIDI" ], "filament_wipe": [ "nil" diff --git a/resources/profiles/Qidi/filament/fdm_filament_pa.json b/resources/profiles/Qidi/filament/fdm_filament_pa.json index fb2d02e700e..1e880d9d719 100644 --- a/resources/profiles/Qidi/filament/fdm_filament_pa.json +++ b/resources/profiles/Qidi/filament/fdm_filament_pa.json @@ -14,7 +14,7 @@ "100" ], "hot_plate_temp" : [ - "100" + "80" ], "textured_plate_temp" : [ "100" @@ -26,7 +26,7 @@ "100" ], "hot_plate_temp_initial_layer" : [ - "100" + "80" ], "textured_plate_temp_initial_layer" : [ "100" diff --git a/resources/profiles/Qidi/filament/fdm_filament_pet.json b/resources/profiles/Qidi/filament/fdm_filament_pet.json index 62692bd27b9..a41d223fb0a 100644 --- a/resources/profiles/Qidi/filament/fdm_filament_pet.json +++ b/resources/profiles/Qidi/filament/fdm_filament_pet.json @@ -11,7 +11,7 @@ "80" ], "hot_plate_temp" : [ - "70" + "80" ], "textured_plate_temp" : [ "80" @@ -23,7 +23,7 @@ "80" ], "hot_plate_temp_initial_layer" : [ - "80" + "70" ], "textured_plate_temp_initial_layer" : [ "80" @@ -56,10 +56,10 @@ "1" ], "fan_max_speed": [ - "100" + "80" ], "fan_min_speed": [ - "20" + "10" ], "overhang_fan_speed": [ "100" diff --git a/resources/profiles/Qidi/filament/fdm_filament_pla.json b/resources/profiles/Qidi/filament/fdm_filament_pla.json index 567123181c5..d72b51ae860 100644 --- a/resources/profiles/Qidi/filament/fdm_filament_pla.json +++ b/resources/profiles/Qidi/filament/fdm_filament_pla.json @@ -20,31 +20,31 @@ "20" ], "cool_plate_temp" : [ - "60" + "55" ], "eng_plate_temp" : [ - "60" + "55" ], "hot_plate_temp" : [ - "60" + "55" ], "textured_plate_temp" : [ - "60" + "55" ], "cool_plate_temp_initial_layer" : [ - "60" + "55" ], "eng_plate_temp_initial_layer" : [ - "60" + "55" ], "hot_plate_temp_initial_layer" : [ - "60" + "55" ], "textured_plate_temp_initial_layer" : [ - "60" + "55" ], "nozzle_temperature_initial_layer": [ - "220" + "210" ], "reduce_fan_stop_start_freq": [ "1" @@ -86,6 +86,6 @@ "4" ], "additional_cooling_fan_speed": [ - "70" + "100" ] } diff --git a/resources/profiles/Qidi/filament/fdm_filament_tpu.json b/resources/profiles/Qidi/filament/fdm_filament_tpu.json index 497617f2649..e182ee1c3f2 100644 --- a/resources/profiles/Qidi/filament/fdm_filament_tpu.json +++ b/resources/profiles/Qidi/filament/fdm_filament_tpu.json @@ -5,28 +5,28 @@ "instantiation": "false", "inherits": "fdm_filament_common", "cool_plate_temp" : [ - "30" + "50" ], "eng_plate_temp" : [ - "30" + "50" ], "hot_plate_temp" : [ - "35" + "50" ], "textured_plate_temp" : [ - "35" + "50" ], "cool_plate_temp_initial_layer" : [ - "30" + "05" ], "eng_plate_temp_initial_layer" : [ - "30" + "50" ], "hot_plate_temp_initial_layer" : [ - "35" + "50" ], "textured_plate_temp_initial_layer" : [ - "35" + "50" ], "fan_cooling_layer_time": [ "100" @@ -38,16 +38,16 @@ "TPU" ], "filament_density": [ - "1.24" + "1.22" ], "filament_cost": [ - "20" + "40" ], "filament_retraction_length": [ - "0.4" + "1" ], "nozzle_temperature_initial_layer": [ - "240" + "230" ], "reduce_fan_stop_start_freq": [ "1" @@ -71,13 +71,13 @@ "1" ], "nozzle_temperature": [ - "240" + "230" ], "temperature_vitrification": [ - "35" + "99" ], "nozzle_temperature_range_low": [ - "200" + "205" ], "nozzle_temperature_range_high": [ "250" diff --git a/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json index 0ac09ea7aca..62a6acc62c0 100644 --- a/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json @@ -94,7 +94,7 @@ "deretraction_speed": [ "0" ], - "single_extruder_multi_material": "1", + "single_extruder_multi_material": "0", "change_filament_gcode": "", "machine_pause_gcode": "M0", "default_filament_profile": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json index 4415483f2cc..2505730d9e1 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 0.4 nozzle.json @@ -94,7 +94,7 @@ "deretraction_speed": [ "0" ], - "single_extruder_multi_material": "1", + "single_extruder_multi_material": "0", "change_filament_gcode": "", "machine_pause_gcode": "M0", "default_filament_profile": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.2 nozzle.json new file mode 100644 index 00000000000..8921e1cc41c --- /dev/null +++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.2 nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "machine", + "setting_id": "GM008", + "name": "Qidi X-Max 3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Qidi X-Max 3 0.4 nozzle", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Qidi X-Max 3", + "printer_variant": "0.2", + "default_filament_profile": [ + "QIDI PLA Rapido 0.2 nozzle;QIDI PETG Tough 0.2 nozzle;QIDI ABS Rapido 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @Qidi XMax3 0.2 nozzle", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json index b2ae653abcf..e22bca8b0eb 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json @@ -21,7 +21,7 @@ "nozzle_type": "hardened_steel", "auxiliary_fan": "1", "max_layer_height": [ - "0.3" + "0.32" ], "min_layer_height": [ "0.07" @@ -39,7 +39,7 @@ "deretraction_speed": [ "0" ], - "single_extruder_multi_material": "1", + "single_extruder_multi_material": "0", "change_filament_gcode": "", "machine_pause_gcode": "M0", "default_filament_profile": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.6 nozzle.json new file mode 100644 index 00000000000..5f167207b6c --- /dev/null +++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.6 nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "machine", + "setting_id": "GM008", + "name": "Qidi X-Max 3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Qidi X-Max 3 0.4 nozzle", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Qidi X-Max 3", + "printer_variant": "0.6", + "default_filament_profile": [ + "QIDI PLA Rapido" + ], + "default_print_profile": "0.30mm Standard @Qidi XMax3 0.6 nozzle", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4" + ], + "retraction_minimum_travel": [ + "3" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.8 nozzle.json new file mode 100644 index 00000000000..f2b9122af14 --- /dev/null +++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.8 nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "machine", + "setting_id": "GM008", + "name": "Qidi X-Max 3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Qidi X-Max 3 0.4 nozzle", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Qidi X-Max 3", + "printer_variant": "0.8", + "default_filament_profile": [ + "QIDI PLA Rapido" + ], + "default_print_profile": "0.40mm Standard @Qidi XMax3 0.8 nozzle", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3" + ], + "retraction_length": [ + "3" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3.json b/resources/profiles/Qidi/machine/Qidi X-Max 3.json index 6769d1ca66d..c2e6f10b9b6 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 3.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 3.json @@ -2,11 +2,11 @@ "type": "machine_model", "name": "Qidi X-Max 3", "model_id": "Qidi-XMax-3", - "nozzle_diameter": "0.4", + "nozzle_diameter": "0.4;0.2;0.6;0.8", "machine_tech": "FFF", "family": "Qidi", "bed_model": "qidi_xmax3_buildplate_model.stl", "bed_texture": "qidi_xmax3_buildplate_texture.png", "hotend_model": "qidi_xseries_gen3_hotend.stl", - "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PET-CF;QIDI PA12-CF;QIDI PAHT-CF;QIDI ABS-GF25;QIDI PA-Ultra;Qidi Generic ASA;Qidi Generic ABS;Qidi Generic PA-CF;Qidi Generic PA;Qidi Generic PC;Qidi Generic PETG-CF;Qidi Generic PETG;Qidi Generic PLA Silk;Qidi Generic PLA;Qidi Generic PLA-CF;Qidi Generic PVA;Qidi Generic TPU 95A" + "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PET-CF;QIDI PA12-CF;QIDI PAHT-CF;QIDI ABS-GF25;QIDI PA-Ultra;Qidi Generic ASA;Qidi Generic ABS;Qidi Generic PA-CF;Qidi Generic PA;Qidi Generic PC;Qidi Generic PETG-CF;Qidi Generic PETG;Qidi Generic PLA Silk;Qidi Generic PLA;Qidi Generic TPU 95A" } diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json index 678df6a8d8e..c722d7ca34e 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 0.4 nozzle.json @@ -94,7 +94,7 @@ "deretraction_speed": [ "0" ], - "single_extruder_multi_material": "1", + "single_extruder_multi_material": "0", "change_filament_gcode": "", "machine_pause_gcode": "M0", "default_filament_profile": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.2 nozzle.json new file mode 100644 index 00000000000..c29bdd6655e --- /dev/null +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.2 nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "machine", + "setting_id": "GM008", + "name": "Qidi X-Plus 3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Qidi X-Plus 3 0.4 nozzle", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Qidi X-Plus 3", + "printer_variant": "0.2", + "default_filament_profile": [ + "QIDI PLA Rapido 0.2 nozzle;QIDI PETG Tough 0.2 nozzle;QIDI ABS Rapido 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @Qidi XPlus3 0.2 nozzle", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json index 6b07094a7c6..c63f6028a59 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json @@ -38,7 +38,7 @@ "deretraction_speed": [ "0" ], - "single_extruder_multi_material": "1", + "single_extruder_multi_material": "0", "change_filament_gcode": "", "machine_pause_gcode": "M0", "default_filament_profile": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.6 nozzle.json new file mode 100644 index 00000000000..d635074a5bc --- /dev/null +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.6 nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "machine", + "setting_id": "GM008", + "name": "Qidi X-Plus 3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Qidi X-Plus 3 0.4 nozzle", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Qidi X-Plus 3", + "printer_variant": "0.6", + "default_filament_profile": [ + "QIDI PLA Rapido" + ], + "default_print_profile": "0.30mm Standard @Qidi XPlus3 0.6 nozzle", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4" + ], + "retraction_minimum_travel": [ + "3" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.8 nozzle.json new file mode 100644 index 00000000000..5b51b03bf9e --- /dev/null +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.8 nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "machine", + "setting_id": "GM008", + "name": "Qidi X-Plus 3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Qidi X-Plus 3 0.4 nozzle", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Qidi X-Plus 3", + "printer_variant": "0.8", + "default_filament_profile": [ + "QIDI PLA Rapido" + ], + "default_print_profile": "0.40mm Standard @Qidi XPlus3 0.8 nozzle", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3" + ], + "retraction_length": [ + "3" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3.json index 0e78aec8459..a9124522d5b 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 3.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3.json @@ -2,11 +2,11 @@ "type": "machine_model", "name": "Qidi X-Plus 3", "model_id": "Qidi-XPlus-3", - "nozzle_diameter": "0.4", + "nozzle_diameter": "0.4;0.2;0.6;0.8", "machine_tech": "FFF", "family": "Qidi", "bed_model": "qidi_xplus3_buildplate_model.stl", "bed_texture": "qidi_xplus3_buildplate_texture.png", "hotend_model": "qidi_xseries_gen3_hotend.stl", - "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PET-CF;QIDI PA12-CF;QIDI PAHT-CF;QIDI ABS-GF25;QIDI PA-Ultra;Qidi Generic ASA;Qidi Generic ABS;Qidi Generic PA-CF;Qidi Generic PA;Qidi Generic PC;Qidi Generic PETG-CF;Qidi Generic PETG;Qidi Generic PLA Silk;Qidi Generic PLA;Qidi Generic PLA-CF;Qidi Generic PVA;Qidi Generic TPU 95A" + "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PET-CF;QIDI PA12-CF;QIDI PAHT-CF;QIDI ABS-GF25;QIDI PA-Ultra;Qidi Generic ASA;Qidi Generic ABS;Qidi Generic PA-CF;Qidi Generic PA;Qidi Generic PC;Qidi Generic PETG-CF;Qidi Generic PETG;Qidi Generic PLA Silk;Qidi Generic PLA;Qidi Generic TPU 95A" } diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.2 nozzle.json new file mode 100644 index 00000000000..059c5aeacd6 --- /dev/null +++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.2 nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "machine", + "setting_id": "GM008", + "name": "Qidi X-Smart 3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Qidi X-Smart 3 0.4 nozzle", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Qidi X-Smart 3", + "printer_variant": "0.2", + "default_filament_profile": [ + "QIDI PLA Rapido 0.2 nozzle;QIDI PETG Tough 0.2 nozzle;QIDI ABS Rapido 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @Qidi XSmart3 0.2 nozzle", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json index 96a02756327..c923615783b 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json @@ -39,7 +39,7 @@ "deretraction_speed": [ "0" ], - "single_extruder_multi_material": "1", + "single_extruder_multi_material": "0", "change_filament_gcode": "", "machine_pause_gcode": "M0", "default_filament_profile": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.6 nozzle.json new file mode 100644 index 00000000000..1902dc18981 --- /dev/null +++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.6 nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "machine", + "setting_id": "GM008", + "name": "Qidi X-Smart 3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Qidi X-Smart 3 0.4 nozzle", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Qidi X-Smart 3", + "printer_variant": "0.6", + "default_filament_profile": [ + "QIDI PLA Rapido" + ], + "default_print_profile": "0.30mm Standard @Qidi XSmart3 0.6 nozzle", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4" + ], + "retraction_minimum_travel": [ + "3" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.8 nozzle.json new file mode 100644 index 00000000000..7e7cfa7a119 --- /dev/null +++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.8 nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "machine", + "setting_id": "GM008", + "name": "Qidi X-Smart 3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Qidi X-Smart 3 0.4 nozzle", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Qidi X-Smart 3", + "printer_variant": "0.8", + "default_filament_profile": [ + "QIDI PLA Rapido" + ], + "default_print_profile": "0.40mm Standard @Qidi XSmart3 0.8 nozzle", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3" + ], + "retraction_length": [ + "3" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3.json index baad9b53406..ccd255521a2 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Smart 3.json +++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3.json @@ -2,7 +2,7 @@ "type": "machine_model", "name": "Qidi X-Smart 3", "model_id": "Qidi-XSmart-3", - "nozzle_diameter": "0.4", + "nozzle_diameter": "0.4;0.2;0.6;0.8", "machine_tech": "FFF", "family": "Qidi", "bed_model": "qidi_xsmart3_buildplate_model.stl", diff --git a/resources/profiles/Qidi/machine/fdm_machine_common.json b/resources/profiles/Qidi/machine/fdm_machine_common.json index fe27b6027b3..d7e14ddcba1 100644 --- a/resources/profiles/Qidi/machine/fdm_machine_common.json +++ b/resources/profiles/Qidi/machine/fdm_machine_common.json @@ -19,43 +19,43 @@ "5000" ], "machine_max_acceleration_extruding": [ - "10000" + "20000" ], "machine_max_acceleration_retracting": [ - "1000" + "5000" ], "machine_max_acceleration_x": [ - "10000" + "20000" ], "machine_max_acceleration_y": [ - "10000" + "20000" ], "machine_max_acceleration_z": [ - "100" + "500" ], "machine_max_speed_e": [ - "60" + "30" ], "machine_max_speed_x": [ - "500" + "600" ], "machine_max_speed_y": [ - "500" + "600" ], "machine_max_speed_z": [ "10" ], "machine_max_jerk_e": [ - "5" + "2" ], "machine_max_jerk_x": [ - "8" + "9" ], "machine_max_jerk_y": [ - "8" + "9" ], "machine_max_jerk_z": [ - "0.4" + "3" ], "machine_min_extruding_rate": [ "0" @@ -105,14 +105,15 @@ "retraction_speed": [ "60" ], - "single_extruder_multi_material": "1", + "single_extruder_multi_material": "0", "change_filament_gcode": "", "wipe": [ "1" ], "z_lift_type": "NormalLift", - "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", + "default_print_profile": "0.20mm Standard @Qidi XMax3", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", - "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", - "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" + "machine_start_gcode": "G28\nM141 S0 ;set chamber temp\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600", + "machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG90\n{if max_layer_z < max_print_height / 2}\nG1 Z{max_print_height / 2 + 10} F600\n{else}\nG1 Z{min(max_print_height, max_layer_z + 10)}\n{endif}\nG0 X5 Y{print_bed_max[1]-11} F12000\nM141 S0" + } diff --git a/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json b/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json index 906fb5506f2..5f98e235673 100644 --- a/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json +++ b/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json @@ -3,71 +3,21 @@ "name": "fdm_qidi_x3_common", "from": "system", "instantiation": "false", - "inherits": "fdm_qidi_common", + "inherits": "fdm_machine_common", "gcode_flavor": "klipper", "auxiliary_fan": "1", - "machine_max_acceleration_e": [ - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "20000", - "20000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "500" - ], - "machine_max_speed_e": [ - "30", - "30" - ], - "machine_max_speed_x": [ - "600", - "600" - ], - "machine_max_speed_y": [ - "600", - "600" - ], - "machine_max_speed_z": [ - "10", - "10" - ], - "machine_max_jerk_e": [ - "2", - "2" - ], - "machine_max_jerk_x": [ - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3" - ], "change_filament_gcode": "", "machine_pause_gcode": "M0", + "support_chamber_temp_control": "1", + "retraction_length": [ + "1" +], +"retraction_speed": [ + "30" +], +"z_hop": [ + "0.4" +], "machine_start_gcode": "G28\nM141 S0 ;set chamber temp\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600", "machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG90\n{if max_layer_z < max_print_height / 2}\nG1 Z{max_print_height / 2 + 10} F600\n{else}\nG1 Z{min(max_print_height, max_layer_z + 10)}\n{endif}\nG0 X5 Y{print_bed_max[1]-11} F12000\nM141 S0", "scan_first_layer": "0" diff --git a/resources/profiles/Qidi/process/0.06mm Standard @Qidi XMax3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.06mm Standard @Qidi XMax3 0.2 nozzle.json new file mode 100644 index 00000000000..735eef1457f --- /dev/null +++ b/resources/profiles/Qidi/process/0.06mm Standard @Qidi XMax3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP024", + "name": "0.06mm Standard @Qidi XMax3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.06_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Max 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.06mm Standard @Qidi XPlus3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.06mm Standard @Qidi XPlus3 0.2 nozzle.json new file mode 100644 index 00000000000..8d79bfc79bd --- /dev/null +++ b/resources/profiles/Qidi/process/0.06mm Standard @Qidi XPlus3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP024", + "name": "0.06mm Standard @Qidi XPlus3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.06_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Plus 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.06mm Standard @Qidi XSmart3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.06mm Standard @Qidi XSmart3 0.2 nozzle.json new file mode 100644 index 00000000000..095c931fea4 --- /dev/null +++ b/resources/profiles/Qidi/process/0.06mm Standard @Qidi XSmart3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP024", + "name": "0.06mm Standard @Qidi XSmart3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.06_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Smart 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.08mm Standard @Qidi XMax3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.08mm Standard @Qidi XMax3 0.2 nozzle.json new file mode 100644 index 00000000000..830890709e3 --- /dev/null +++ b/resources/profiles/Qidi/process/0.08mm Standard @Qidi XMax3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP025", + "name": "0.08mm Standard @Qidi XMax3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.08_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Max 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.08mm Standard @Qidi XPlus3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.08mm Standard @Qidi XPlus3 0.2 nozzle.json new file mode 100644 index 00000000000..c822c08cf1e --- /dev/null +++ b/resources/profiles/Qidi/process/0.08mm Standard @Qidi XPlus3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP025", + "name": "0.08mm Standard @Qidi XPlus3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.08_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Plus 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.08mm Standard @Qidi XSmart3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.08mm Standard @Qidi XSmart3 0.2 nozzle.json new file mode 100644 index 00000000000..7dc335aba12 --- /dev/null +++ b/resources/profiles/Qidi/process/0.08mm Standard @Qidi XSmart3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP025", + "name": "0.08mm Standard @Qidi XSmart3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.08_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Smart 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.10mm Standard @Qidi XMax3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.10mm Standard @Qidi XMax3 0.2 nozzle.json new file mode 100644 index 00000000000..f0e1cfe0ed5 --- /dev/null +++ b/resources/profiles/Qidi/process/0.10mm Standard @Qidi XMax3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP007", + "name": "0.10mm Standard @Qidi XMax3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.10_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Max 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.10mm Standard @Qidi XPlus3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.10mm Standard @Qidi XPlus3 0.2 nozzle.json new file mode 100644 index 00000000000..2ccc5c2290b --- /dev/null +++ b/resources/profiles/Qidi/process/0.10mm Standard @Qidi XPlus3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP007", + "name": "0.10mm Standard @Qidi XPlus3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.10_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Plus 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.10mm Standard @Qidi XSmart3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.10mm Standard @Qidi XSmart3 0.2 nozzle.json new file mode 100644 index 00000000000..82899e73e42 --- /dev/null +++ b/resources/profiles/Qidi/process/0.10mm Standard @Qidi XSmart3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP007", + "name": "0.10mm Standard @Qidi XSmart3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.10_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Smart 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json new file mode 100644 index 00000000000..a4dd816cea5 --- /dev/null +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json @@ -0,0 +1,94 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Qidi X3", + "from": "system", + "inherits": "fdm_process_qidi_x3_common", + "instantiation": "false", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "2", + "internal_solid_infill_line_width": "0.45", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.12", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_threshold_angle": "20", + "support_object_xy_distance": "50%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "5", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "initial_layer_infill_speed": "105", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "50%", + "inner_wall_speed": "350", + "internal_bridge_speed": "50", + "internal_solid_infill_speed": "350", + "is_custom_defined": "0", + "minimum_sparse_infill_area": "15", + "outer_wall_speed": "200", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "sparse_infill_speed": "430", + "top_shell_thickness": "0.6" +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json index 5cce70ebe0e..93796034511 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json @@ -1,84 +1,10 @@ { - "type": "process", - "setting_id": "GP004", - "name": "0.12mm Fine @Qidi XMax3", - "from": "system", - "inherits": "fdm_process_qidi_x3_common", - "instantiation": "true", - "adaptive_layer_height": "1", - "reduce_crossing_wall": "0", - "layer_height": "0.12", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "5", - "bottom_shell_thickness": "0", - "bridge_flow": "1", - "brim_width": "0", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.42", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "grid", - "initial_layer_line_width": "0.5", - "initial_layer_print_height": "0.12", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "15%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.1", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "inner_wall_line_width": "0.45", - "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "2", - "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0.45", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_style": "grid", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.12", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "3", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.5", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2.5", - "support_threshold_angle": "20", - "support_object_xy_distance": "50%", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", - "top_shell_layers": "5", - "top_shell_thickness": "0.8", - "enable_prime_tower": "0", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Qidi XMax3", + "from": "system", + "instantiation": "true", + "inherits": "0.12mm Fine @Qidi X3", "compatible_printers": [ "Qidi X-Max 3 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json index d3dc776ab92..a54fc60b409 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json @@ -1,85 +1,11 @@ { - "type": "process", - "setting_id": "GP004", - "name": "0.12mm Fine @Qidi XPlus3", - "from": "system", - "inherits": "fdm_process_qidi_x3_common", - "instantiation": "true", - "adaptive_layer_height": "1", - "reduce_crossing_wall": "0", - "layer_height": "0.12", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "5", - "bottom_shell_thickness": "0", - "bridge_flow": "1", - "brim_width": "0", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.42", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "grid", - "initial_layer_line_width": "0.5", - "initial_layer_print_height": "0.12", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "15%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.1", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "inner_wall_line_width": "0.45", - "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "2", - "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0.42", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_style": "grid", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.12", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "3", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.5", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2.5", - "support_threshold_angle": "20", - "support_object_xy_distance": "50%", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", - "top_shell_layers": "5", - "top_shell_thickness": "0.8", - "enable_prime_tower": "0", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", - "compatible_printers": [ - "Qidi X-Plus 3 0.4 nozzle" - ] + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Qidi XPlus3", + "from": "system", + "instantiation": "true", + "inherits": "0.12mm Fine @Qidi X3", +"compatible_printers": [ + "Qidi X-Plus 3 0.4 nozzle" +] } diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json index ae7ba8c48d8..6f821fc31be 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json @@ -3,82 +3,8 @@ "setting_id": "GP004", "name": "0.12mm Fine @Qidi XSmart3", "from": "system", - "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", - "adaptive_layer_height": "1", - "reduce_crossing_wall": "0", - "layer_height": "0.12", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "5", - "bottom_shell_thickness": "0", - "bridge_flow": "1", - "brim_width": "0", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.42", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "grid", - "initial_layer_line_width": "0.5", - "initial_layer_print_height": "0.12", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "15%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.1", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "inner_wall_line_width": "0.45", - "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "2", - "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0.42", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_style": "grid", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.12", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "3", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.5", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2.5", - "support_threshold_angle": "20", - "support_object_xy_distance": "50%", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", - "top_shell_layers": "5", - "top_shell_thickness": "0.8", - "enable_prime_tower": "0", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", + "inherits": "0.12mm Fine @Qidi X3", "compatible_printers": [ "Qidi X-Smart 3 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/process/0.12mm Standard @Qidi XMax3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.12mm Standard @Qidi XMax3 0.2 nozzle.json new file mode 100644 index 00000000000..792b3c6c3ad --- /dev/null +++ b/resources/profiles/Qidi/process/0.12mm Standard @Qidi XMax3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP026", + "name": "0.12mm Standard @Qidi XMax3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.12_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Max 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.12mm Standard @Qidi XPlus3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.12mm Standard @Qidi XPlus3 0.2 nozzle.json new file mode 100644 index 00000000000..ebd7a34394c --- /dev/null +++ b/resources/profiles/Qidi/process/0.12mm Standard @Qidi XPlus3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP026", + "name": "0.12mm Standard @Qidi XPlus3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.12_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Plus 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.12mm Standard @Qidi XSmart3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.12mm Standard @Qidi XSmart3 0.2 nozzle.json new file mode 100644 index 00000000000..f457767d258 --- /dev/null +++ b/resources/profiles/Qidi/process/0.12mm Standard @Qidi XSmart3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP026", + "name": "0.12mm Standard @Qidi XSmart3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.12_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Smart 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.14mm Standard @Qidi XMax3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.14mm Standard @Qidi XMax3 0.2 nozzle.json new file mode 100644 index 00000000000..f3dacfdb20c --- /dev/null +++ b/resources/profiles/Qidi/process/0.14mm Standard @Qidi XMax3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP027", + "name": "0.14mm Standard @Qidi XMax3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.14_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Max 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.14mm Standard @Qidi XPlus3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.14mm Standard @Qidi XPlus3 0.2 nozzle.json new file mode 100644 index 00000000000..d1d097b2ae0 --- /dev/null +++ b/resources/profiles/Qidi/process/0.14mm Standard @Qidi XPlus3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP027", + "name": "0.14mm Standard @Qidi XPlus3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.14_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Plus 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.14mm Standard @Qidi XSmart3 0.2 nozzle.json b/resources/profiles/Qidi/process/0.14mm Standard @Qidi XSmart3 0.2 nozzle.json new file mode 100644 index 00000000000..ce8e5b6b0a8 --- /dev/null +++ b/resources/profiles/Qidi/process/0.14mm Standard @Qidi XSmart3 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP027", + "name": "0.14mm Standard @Qidi XSmart3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.14_nozzle_0.2", + "compatible_printers": [ + "Qidi X-Smart 3 0.2 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json new file mode 100644 index 00000000000..a35cf1a4ea8 --- /dev/null +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json @@ -0,0 +1,96 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Qidi X3", + "from": "system", + "inherits": "fdm_process_qidi_x3_common", + "instantiation": "false", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "brim_width": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "bridge_no_support": "0", + "draft_shield": "disabled", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_line_width": "0.5", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "2", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.16", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_threshold_angle": "25", + "support_object_xy_distance": "50%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "4", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "brim_object_gap": "0.1", + "elefant_foot_compensation": "0.15", + "initial_layer_infill_speed": "105", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "50%", + "inner_wall_speed": "300", + "internal_bridge_speed": "50", + "internal_solid_infill_speed": "300", + "is_custom_defined": "0", + "minimum_sparse_infill_area": "15", + "outer_wall_speed": "200", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "seam_gap": "15%", + "sparse_infill_speed": "330", + "top_shell_thickness": "0.6", + "wall_generator": "classic" +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json index a6e4e831c7d..425a64241ff 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json @@ -3,82 +3,8 @@ "setting_id": "GP004", "name": "0.16mm Optimal @Qidi XMax3", "from": "system", - "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", - "adaptive_layer_height": "1", - "reduce_crossing_wall": "0", - "layer_height": "0.16", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "4", - "bottom_shell_thickness": "0", - "bridge_flow": "1", - "brim_width": "0", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.42", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "grid", - "initial_layer_line_width": "0.5", - "initial_layer_print_height": "0.16", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "15%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.1", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "inner_wall_line_width": "0.45", - "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "2", - "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0.42", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_style": "grid", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.16", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "3", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.5", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2.5", - "support_threshold_angle": "25", - "support_object_xy_distance": "50%", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", - "top_shell_layers": "4", - "top_shell_thickness": "0.8", - "enable_prime_tower": "0", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", + "inherits": "0.16mm Optimal @Qidi X3", "compatible_printers": [ "Qidi X-Max 3 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json index c15df087ce4..0aaabac6794 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json @@ -2,83 +2,9 @@ "type": "process", "setting_id": "GP004", "name": "0.16mm Optimal @Qidi XPlus3", - "from": "system", - "inherits": "fdm_process_qidi_x3_common", - "instantiation": "true", - "adaptive_layer_height": "1", - "reduce_crossing_wall": "0", - "layer_height": "0.16", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "4", - "bottom_shell_thickness": "0", - "bridge_flow": "1", - "brim_width": "0", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.42", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "grid", - "initial_layer_line_width": "0.5", - "initial_layer_print_height": "0.16", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "15%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.1", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "inner_wall_line_width": "0.45", - "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "2", - "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0.42", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_style": "grid", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.16", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "3", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.5", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2.5", - "support_threshold_angle": "25", - "support_object_xy_distance": "50%", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", - "top_shell_layers": "4", - "top_shell_thickness": "0.8", - "enable_prime_tower": "0", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", + "from": "system", + "instantiation": "true", + "inherits": "0.16mm Optimal @Qidi X3", "compatible_printers": [ "Qidi X-Plus 3 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json index e9eaba9f0e4..2aaca760401 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json @@ -3,82 +3,8 @@ "setting_id": "GP004", "name": "0.16mm Optimal @Qidi XSmart3", "from": "system", - "inherits": "fdm_process_qidi_x3_common", "instantiation": "true", - "adaptive_layer_height": "1", - "reduce_crossing_wall": "0", - "layer_height": "0.16", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "4", - "bottom_shell_thickness": "0", - "bridge_flow": "1", - "brim_width": "0", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.42", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "grid", - "initial_layer_line_width": "0.5", - "initial_layer_print_height": "0.16", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "15%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.1", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "inner_wall_line_width": "0.45", - "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "2", - "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0.42", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_style": "grid", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.16", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "3", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.5", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2.5", - "support_threshold_angle": "25", - "support_object_xy_distance": "50%", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", - "top_shell_layers": "4", - "top_shell_thickness": "0.8", - "enable_prime_tower": "0", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", + "inherits": "0.16mm Optimal @Qidi X3", "compatible_printers": [ "Qidi X-Smart 3 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/process/0.18mm Standard @Qidi XMax3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.18mm Standard @Qidi XMax3 0.6 nozzle.json new file mode 100644 index 00000000000..53c20a32824 --- /dev/null +++ b/resources/profiles/Qidi/process/0.18mm Standard @Qidi XMax3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP028", + "name": "0.18mm Standard @Qidi XMax3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.18_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Max 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.18mm Standard @Qidi XPlus3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.18mm Standard @Qidi XPlus3 0.6 nozzle.json new file mode 100644 index 00000000000..65c44aa1874 --- /dev/null +++ b/resources/profiles/Qidi/process/0.18mm Standard @Qidi XPlus3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP028", + "name": "0.18mm Standard @Qidi XPlus3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.18_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Plus 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.18mm Standard @Qidi XSmart3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.18mm Standard @Qidi XSmart3 0.6 nozzle.json new file mode 100644 index 00000000000..92936a7440d --- /dev/null +++ b/resources/profiles/Qidi/process/0.18mm Standard @Qidi XSmart3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP028", + "name": "0.18mm Standard @Qidi XSmart3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.18_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Smart 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi X3.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi X3.json new file mode 100644 index 00000000000..106e6a17caf --- /dev/null +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi X3.json @@ -0,0 +1,22 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Qidi X3", + "from": "system", + "inherits": "fdm_process_qidi_x3_common", + "instantiation": "false", + "layer_height": "0.2", + "elefant_foot_compensation": "0.15", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "top_shell_thickness": "0.6", + "bridge_flow": "1", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "200", + "inner_wall_speed": "300", + "sparse_infill_speed": "270", + "internal_solid_infill_speed": "250", + "top_surface_speed": "200", + "gap_infill_speed": "250" +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json index 982cb575ae9..7fd517a0728 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json @@ -3,82 +3,8 @@ "setting_id": "GP004", "name": "0.20mm Standard @Qidi XMax3", "from": "system", - "inherits": "fdm_process_qidi_x3_common", + "inherits": "0.20mm Standard @Qidi X3", "instantiation": "true", - "adaptive_layer_height": "1", - "reduce_crossing_wall": "0", - "layer_height": "0.2", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bridge_flow": "1", - "brim_width": "0", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.42", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "grid", - "initial_layer_line_width": "0.5", - "initial_layer_print_height": "0.2", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "15%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.1", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "inner_wall_line_width": "0.45", - "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "2", - "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0.42", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_style": "grid", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.2", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "3", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.5", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2.5", - "support_threshold_angle": "30", - "support_object_xy_distance": "50%", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", - "top_shell_layers": "4", - "top_shell_thickness": "0.8", - "enable_prime_tower": "0", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", "compatible_printers": [ "Qidi X-Max 3 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json index e8be7a9b1c0..6e94fd431c4 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json @@ -3,82 +3,8 @@ "setting_id": "GP004", "name": "0.20mm Standard @Qidi XPlus3", "from": "system", - "inherits": "fdm_process_qidi_x3_common", + "inherits": "0.20mm Standard @Qidi X3", "instantiation": "true", - "adaptive_layer_height": "1", - "reduce_crossing_wall": "0", - "layer_height": "0.2", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bridge_flow": "1", - "brim_width": "0", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.42", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "grid", - "initial_layer_line_width": "0.5", - "initial_layer_print_height": "0.2", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "15%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.1", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "inner_wall_line_width": "0.45", - "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "2", - "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0.42", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_style": "grid", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.2", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "3", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.5", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2.5", - "support_threshold_angle": "30", - "support_object_xy_distance": "50%", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", - "top_shell_layers": "4", - "top_shell_thickness": "0.8", - "enable_prime_tower": "0", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", "compatible_printers": [ "Qidi X-Plus 3 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json index c9549580fc9..107f35d5e10 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json @@ -3,82 +3,8 @@ "setting_id": "GP004", "name": "0.20mm Standard @Qidi XSmart3", "from": "system", - "inherits": "fdm_process_qidi_x3_common", + "inherits": "0.20mm Standard @Qidi X3", "instantiation": "true", - "adaptive_layer_height": "1", - "reduce_crossing_wall": "0", - "layer_height": "0.2", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bridge_flow": "1", - "brim_width": "0", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.42", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "grid", - "initial_layer_line_width": "0.5", - "initial_layer_print_height": "0.2", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "15%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.1", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "inner_wall_line_width": "0.45", - "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "2", - "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0.42", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_style": "grid", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.2", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "3", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.5", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2.5", - "support_threshold_angle": "30", - "support_object_xy_distance": "50%", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.4", - "top_shell_layers": "4", - "top_shell_thickness": "0.8", - "enable_prime_tower": "0", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", "compatible_printers": [ "Qidi X-Smart 3 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json b/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json new file mode 100644 index 00000000000..d5d77f58f9e --- /dev/null +++ b/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json @@ -0,0 +1,93 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Qidi X3", + "from": "system", + "inherits": "fdm_process_qidi_x3_common", + "instantiation": "false", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "brim_width": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "bridge_no_support": "0", + "draft_shield": "disabled", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_line_width": "0.5", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "2", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.25", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_threshold_angle": "35", + "support_object_xy_distance": "50%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "brim_object_gap": "0.1", + "detect_thin_wall": "0", + "elefant_foot_compensation": "0.15", + "initial_layer_infill_speed": "105", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "50%", + "inner_wall_speed": "230", + "internal_bridge_speed": "50", + "internal_solid_infill_speed": "230", + "is_custom_defined": "0", + "layer_height": "0.24", + "minimum_sparse_infill_area": "15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "seam_gap": "15%", + "sparse_infill_speed": "230", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "wall_generator": "classic" +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.24mm Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.24mm Draft @Qidi XMax3.json new file mode 100644 index 00000000000..dbd3a643592 --- /dev/null +++ b/resources/profiles/Qidi/process/0.24mm Draft @Qidi XMax3.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Qidi XMax3", + "from": "system", + "inherits": "0.24mm Draft @Qidi X3", + "instantiation": "true", + "compatible_printers": [ + "Qidi X-Max 3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.24mm Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.24mm Draft @Qidi XPlus3.json new file mode 100644 index 00000000000..9a3f2e70840 --- /dev/null +++ b/resources/profiles/Qidi/process/0.24mm Draft @Qidi XPlus3.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Qidi XPlus3", + "from": "system", + "inherits": "0.24mm Draft @Qidi X3", + "instantiation": "true", + "compatible_printers": [ + "Qidi X-Plus 3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.24mm Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.24mm Draft @Qidi XSmart3.json new file mode 100644 index 00000000000..b213c5e9430 --- /dev/null +++ b/resources/profiles/Qidi/process/0.24mm Draft @Qidi XSmart3.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Qidi XSmart3", + "from": "system", + "inherits": "0.24mm Draft @Qidi X3", + "instantiation": "true", + "compatible_printers": [ + "Qidi X-Smart 3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.24mm Standard @Qidi XMax3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XMax3 0.6 nozzle.json new file mode 100644 index 00000000000..67f566485e1 --- /dev/null +++ b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XMax3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP029", + "name": "0.24mm Standard @Qidi XMax3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.24_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Max 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.24mm Standard @Qidi XMax3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XMax3 0.8 nozzle.json new file mode 100644 index 00000000000..414008647a7 --- /dev/null +++ b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XMax3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP032", + "name": "0.24mm Standard @Qidi XMax3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.24_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus3 0.6 nozzle.json new file mode 100644 index 00000000000..bd4d2d97ed2 --- /dev/null +++ b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP029", + "name": "0.24mm Standard @Qidi XPlus3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.24_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Plus 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus3 0.8 nozzle.json new file mode 100644 index 00000000000..7b8baa99a59 --- /dev/null +++ b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP032", + "name": "0.24mm Standard @Qidi XPlus3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.24_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Plus 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.24mm Standard @Qidi XSmart3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XSmart3 0.6 nozzle.json new file mode 100644 index 00000000000..56f7519f8ac --- /dev/null +++ b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XSmart3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP029", + "name": "0.24mm Standard @Qidi XSmart3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.24_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Smart 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.24mm Standard @Qidi XSmart3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XSmart3 0.8 nozzle.json new file mode 100644 index 00000000000..014903f7d23 --- /dev/null +++ b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XSmart3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP032", + "name": "0.24mm Standard @Qidi XSmart3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.24_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Smart 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json new file mode 100644 index 00000000000..7f89a0246be --- /dev/null +++ b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json @@ -0,0 +1,94 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @Qidi X3", + "from": "system", + "inherits": "fdm_process_qidi_x3_common", + "instantiation": "false", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "brim_width": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "bridge_no_support": "0", + "draft_shield": "disabled", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_line_width": "0.5", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "2", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.3", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_threshold_angle": "40", + "support_object_xy_distance": "50%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "brim_object_gap": "0.1", + "elefant_foot_compensation": "0.15", + "initial_layer_infill_speed": "105", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "50%", + "inner_wall_speed": "200", + "internal_bridge_speed": "50", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "200", + "is_custom_defined": "0", + "layer_height": "0.28", + "minimum_sparse_infill_area": "15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "seam_gap": "15%", + "sparse_infill_speed": "200", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "wall_generator": "classic" +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XMax3.json new file mode 100644 index 00000000000..9d4a607ff7a --- /dev/null +++ b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XMax3.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @Qidi XMax3", + "from": "system", + "inherits": "0.28mm Extra Draft @Qidi X3", + "instantiation": "true", + "compatible_printers": [ + "Qidi X-Max 3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XPlus3.json new file mode 100644 index 00000000000..bee246ca7a5 --- /dev/null +++ b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XPlus3.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @Qidi XPlus3", + "from": "system", + "inherits": "0.28mm Extra Draft @Qidi X3", + "instantiation": "true", + "compatible_printers": [ + "Qidi X-Plus 3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XSmart3.json new file mode 100644 index 00000000000..9f6def0d437 --- /dev/null +++ b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XSmart3.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Extra Draft @Qidi XSmart3", + "from": "system", + "inherits": "0.28mm Extra Draft @Qidi X3", + "instantiation": "true", + "compatible_printers": [ + "Qidi X-Smart 3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.30mm Standard @Qidi XMax3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.30mm Standard @Qidi XMax3 0.6 nozzle.json new file mode 100644 index 00000000000..975025b6a84 --- /dev/null +++ b/resources/profiles/Qidi/process/0.30mm Standard @Qidi XMax3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP010", + "name": "0.30mm Standard @Qidi XMax3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.30_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Max 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.30mm Standard @Qidi XPlus3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.30mm Standard @Qidi XPlus3 0.6 nozzle.json new file mode 100644 index 00000000000..135e2259abd --- /dev/null +++ b/resources/profiles/Qidi/process/0.30mm Standard @Qidi XPlus3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP010", + "name": "0.30mm Standard @Qidi XPlus3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.30_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Plus 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.30mm Standard @Qidi XSmart3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.30mm Standard @Qidi XSmart3 0.6 nozzle.json new file mode 100644 index 00000000000..5c65f829e45 --- /dev/null +++ b/resources/profiles/Qidi/process/0.30mm Standard @Qidi XSmart3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP010", + "name": "0.30mm Standard @Qidi XSmart3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.30_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Smart 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.32mm Standard @Qidi XMax3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.32mm Standard @Qidi XMax3 0.8 nozzle.json new file mode 100644 index 00000000000..064a3909ab1 --- /dev/null +++ b/resources/profiles/Qidi/process/0.32mm Standard @Qidi XMax3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP033", + "name": "0.32mm Standard @Qidi XMax3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.32_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.32mm Standard @Qidi XPlus3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.32mm Standard @Qidi XPlus3 0.8 nozzle.json new file mode 100644 index 00000000000..3a7534ad7c1 --- /dev/null +++ b/resources/profiles/Qidi/process/0.32mm Standard @Qidi XPlus3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP033", + "name": "0.32mm Standard @Qidi XPlus3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.32_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Plus 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.32mm Standard @Qidi XSmart3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.32mm Standard @Qidi XSmart3 0.8 nozzle.json new file mode 100644 index 00000000000..5ef8754e78e --- /dev/null +++ b/resources/profiles/Qidi/process/0.32mm Standard @Qidi XSmart3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP033", + "name": "0.32mm Standard @Qidi XSmart3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.32_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Smart 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.36mm Standard @Qidi XMax3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.36mm Standard @Qidi XMax3 0.6 nozzle.json new file mode 100644 index 00000000000..c02e560df1d --- /dev/null +++ b/resources/profiles/Qidi/process/0.36mm Standard @Qidi XMax3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP030", + "name": "0.36mm Standard @Qidi XMax3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.36_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Max 3 0.6 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.36mm Standard @Qidi XPlus3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.36mm Standard @Qidi XPlus3 0.6 nozzle.json new file mode 100644 index 00000000000..0b4c1b1bde5 --- /dev/null +++ b/resources/profiles/Qidi/process/0.36mm Standard @Qidi XPlus3 0.6 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP030", + "name": "0.36mm Standard @Qidi XPlus3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.36_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Plus 3 0.6 nozzle" + ] +} +s \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.36mm Standard @Qidi XSmart3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.36mm Standard @Qidi XSmart3 0.6 nozzle.json new file mode 100644 index 00000000000..f524041f808 --- /dev/null +++ b/resources/profiles/Qidi/process/0.36mm Standard @Qidi XSmart3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP030", + "name": "0.36mm Standard @Qidi XSmart3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.36_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Smart 3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.40mm Standard @Qidi XMax3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.40mm Standard @Qidi XMax3 0.8 nozzle.json new file mode 100644 index 00000000000..fac741da9d7 --- /dev/null +++ b/resources/profiles/Qidi/process/0.40mm Standard @Qidi XMax3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP009", + "name": "0.40mm Standard @Qidi XMax3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.40_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.40mm Standard @Qidi XPlus3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.40mm Standard @Qidi XPlus3 0.8 nozzle.json new file mode 100644 index 00000000000..0638db1cbd5 --- /dev/null +++ b/resources/profiles/Qidi/process/0.40mm Standard @Qidi XPlus3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP009", + "name": "0.40mm Standard @Qidi XPlus3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.40_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Plus 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.40mm Standard @Qidi XSmart3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.40mm Standard @Qidi XSmart3 0.8 nozzle.json new file mode 100644 index 00000000000..a41c9ec8c28 --- /dev/null +++ b/resources/profiles/Qidi/process/0.40mm Standard @Qidi XSmart3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP009", + "name": "0.40mm Standard @Qidi XSmart3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.40_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Smart 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.42mm Standard @Qidi XMax3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.42mm Standard @Qidi XMax3 0.6 nozzle.json new file mode 100644 index 00000000000..9c3eb9a7a70 --- /dev/null +++ b/resources/profiles/Qidi/process/0.42mm Standard @Qidi XMax3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP031", + "name": "0.42mm Standard @Qidi XMax3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.42_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Max 3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.42mm Standard @Qidi XPlus3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.42mm Standard @Qidi XPlus3 0.6 nozzle.json new file mode 100644 index 00000000000..812e8c82bb4 --- /dev/null +++ b/resources/profiles/Qidi/process/0.42mm Standard @Qidi XPlus3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP031", + "name": "0.42mm Standard @Qidi XPlus3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.42_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Plus 3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.42mm Standard @Qidi XSmart3 0.6 nozzle.json b/resources/profiles/Qidi/process/0.42mm Standard @Qidi XSmart3 0.6 nozzle.json new file mode 100644 index 00000000000..05ce21f74de --- /dev/null +++ b/resources/profiles/Qidi/process/0.42mm Standard @Qidi XSmart3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP031", + "name": "0.42mm Standard @Qidi XSmart3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.42_nozzle_0.6", + "compatible_printers": [ + "Qidi X-Smart 3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Qidi/process/0.48mm Standard @Qidi XMax3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.48mm Standard @Qidi XMax3 0.8 nozzle.json new file mode 100644 index 00000000000..193467be23c --- /dev/null +++ b/resources/profiles/Qidi/process/0.48mm Standard @Qidi XMax3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP034", + "name": "0.48mm Standard @Qidi XMax3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.48_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.48mm Standard @Qidi XPlus3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.48mm Standard @Qidi XPlus3 0.8 nozzle.json new file mode 100644 index 00000000000..ad14777dcec --- /dev/null +++ b/resources/profiles/Qidi/process/0.48mm Standard @Qidi XPlus3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP034", + "name": "0.48mm Standard @Qidi XPlus3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.48_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Plus 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.48mm Standard @Qidi XSmart3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.48mm Standard @Qidi XSmart3 0.8 nozzle.json new file mode 100644 index 00000000000..3f407f0f54b --- /dev/null +++ b/resources/profiles/Qidi/process/0.48mm Standard @Qidi XSmart3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP034", + "name": "0.48mm Standard @Qidi XSmart3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.48_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Smart 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.56mm Standard @Qidi XMax3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.56mm Standard @Qidi XMax3 0.8 nozzle.json new file mode 100644 index 00000000000..3eec92f8f03 --- /dev/null +++ b/resources/profiles/Qidi/process/0.56mm Standard @Qidi XMax3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP035", + "name": "0.56mm Standard @Qidi XMax3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.56_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Max 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.56mm Standard @Qidi XPlus3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.56mm Standard @Qidi XPlus3 0.8 nozzle.json new file mode 100644 index 00000000000..2d5a58a9de0 --- /dev/null +++ b/resources/profiles/Qidi/process/0.56mm Standard @Qidi XPlus3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP035", + "name": "0.56mm Standard @Qidi XPlus3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.56_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Plus 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/0.56mm Standard @Qidi XSmart3 0.8 nozzle.json b/resources/profiles/Qidi/process/0.56mm Standard @Qidi XSmart3 0.8 nozzle.json new file mode 100644 index 00000000000..90f31af3403 --- /dev/null +++ b/resources/profiles/Qidi/process/0.56mm Standard @Qidi XSmart3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP035", + "name": "0.56mm Standard @Qidi XSmart3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_QIDI_0.56_nozzle_0.8", + "compatible_printers": [ + "Qidi X-Smart 3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.06_nozzle_0.2.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.06_nozzle_0.2.json new file mode 100644 index 00000000000..c42a04f8e31 --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.06_nozzle_0.2.json @@ -0,0 +1,25 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.06_nozzle_0.2", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.06", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.08_nozzle_0.2.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.08_nozzle_0.2.json new file mode 100644 index 00000000000..ad51ddcf6a2 --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.08_nozzle_0.2.json @@ -0,0 +1,25 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.08_nozzle_0.2", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.08", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.10_nozzle_0.2.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.10_nozzle_0.2.json new file mode 100644 index 00000000000..a48e3ea91af --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.10_nozzle_0.2.json @@ -0,0 +1,25 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.10_nozzle_0.2", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.1", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.12_nozzle_0.2.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.12_nozzle_0.2.json new file mode 100644 index 00000000000..c0634af8624 --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.12_nozzle_0.2.json @@ -0,0 +1,25 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.12_nozzle_0.2", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.12", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.14_nozzle_0.2.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.14_nozzle_0.2.json new file mode 100644 index 00000000000..dde8d496b31 --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.14_nozzle_0.2.json @@ -0,0 +1,25 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.14_nozzle_0.2", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.14", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.18_nozzle_0.6.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.18_nozzle_0.6.json new file mode 100644 index 00000000000..1dd762690ba --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.18_nozzle_0.6.json @@ -0,0 +1,34 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.18_nozzle_0.6", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.18", + "initial_layer_print_height": "0.3", + "wall_loops": "2", + "bottom_shell_layers": "3", + "top_shell_layers": "3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "outer_wall_speed": "120", + "inner_wall_speed": "150", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", + "gap_infill_speed": "50", + "bridge_speed": "30", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.24_nozzle_0.6.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.24_nozzle_0.6.json new file mode 100644 index 00000000000..f6b5c3a0bb8 --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.24_nozzle_0.6.json @@ -0,0 +1,34 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.24_nozzle_0.6", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.24", + "initial_layer_print_height": "0.3", + "wall_loops": "2", + "bottom_shell_layers": "3", + "top_shell_layers": "3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "outer_wall_speed": "120", + "inner_wall_speed": "150", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", + "gap_infill_speed": "50", + "bridge_speed": "30", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.24_nozzle_0.8.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.24_nozzle_0.8.json new file mode 100644 index 00000000000..bb88ef21c1e --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.24_nozzle_0.8.json @@ -0,0 +1,35 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.24_nozzle_0.8", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.24", + "initial_layer_print_height": "0.4", + "wall_loops": "2", + "bottom_shell_layers": "3", + "top_shell_layers": "3", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "outer_wall_speed": "120", + "inner_wall_speed": "150", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", + "gap_infill_speed": "50", + "bridge_speed": "30", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.30_nozzle_0.6.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.30_nozzle_0.6.json new file mode 100644 index 00000000000..b57304d26cb --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.30_nozzle_0.6.json @@ -0,0 +1,34 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.30_nozzle_0.6", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.3", + "initial_layer_print_height": "0.3", + "wall_loops": "2", + "bottom_shell_layers": "3", + "top_shell_layers": "3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "outer_wall_speed": "120", + "inner_wall_speed": "150", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", + "gap_infill_speed": "50", + "bridge_speed": "30", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.32_nozzle_0.8.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.32_nozzle_0.8.json new file mode 100644 index 00000000000..c34e9f94216 --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.32_nozzle_0.8.json @@ -0,0 +1,35 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.32_nozzle_0.8", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.32", + "initial_layer_print_height": "0.3", + "wall_loops": "2", + "bottom_shell_layers": "3", + "top_shell_layers": "3", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "outer_wall_speed": "120", + "inner_wall_speed": "150", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", + "gap_infill_speed": "50", + "bridge_speed": "30", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.36_nozzle_0.6.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.36_nozzle_0.6.json new file mode 100644 index 00000000000..b4a1a1c8d72 --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.36_nozzle_0.6.json @@ -0,0 +1,34 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.36_nozzle_0.6", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.36", + "initial_layer_print_height": "0.3", + "wall_loops": "2", + "bottom_shell_layers": "3", + "top_shell_layers": "3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "outer_wall_speed": "120", + "inner_wall_speed": "150", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", + "gap_infill_speed": "50", + "bridge_speed": "30", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.40_nozzle_0.8.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.40_nozzle_0.8.json new file mode 100644 index 00000000000..c7cc1dfa356 --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.40_nozzle_0.8.json @@ -0,0 +1,35 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.40_nozzle_0.8", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.4", + "initial_layer_print_height": "0.4", + "wall_loops": "2", + "bottom_shell_layers": "3", + "top_shell_layers": "3", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "outer_wall_speed": "120", + "inner_wall_speed": "150", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", + "gap_infill_speed": "50", + "bridge_speed": "30", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.42_nozzle_0.6.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.42_nozzle_0.6.json new file mode 100644 index 00000000000..95eaeefa928 --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.42_nozzle_0.6.json @@ -0,0 +1,34 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.42_nozzle_0.6", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.42", + "initial_layer_print_height": "0.3", + "wall_loops": "2", + "bottom_shell_layers": "3", + "top_shell_layers": "3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "outer_wall_speed": "120", + "inner_wall_speed": "150", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", + "gap_infill_speed": "50", + "bridge_speed": "30", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.48_nozzle_0.8.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.48_nozzle_0.8.json new file mode 100644 index 00000000000..2bf013928a6 --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.48_nozzle_0.8.json @@ -0,0 +1,35 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.48_nozzle_0.8", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.48", + "initial_layer_print_height": "0.4", + "wall_loops": "2", + "bottom_shell_layers": "3", + "top_shell_layers": "3", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "outer_wall_speed": "120", + "inner_wall_speed": "150", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", + "gap_infill_speed": "50", + "bridge_speed": "30", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Qidi/process/fdm_process_QIDI_0.56_nozzle_0.8.json b/resources/profiles/Qidi/process/fdm_process_QIDI_0.56_nozzle_0.8.json new file mode 100644 index 00000000000..02013be08c0 --- /dev/null +++ b/resources/profiles/Qidi/process/fdm_process_QIDI_0.56_nozzle_0.8.json @@ -0,0 +1,35 @@ +{ + "type": "process", + "name": "fdm_process_QIDI_0.56_nozzle_0.8", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_qidi_x3_common", + "layer_height": "0.56", + "initial_layer_print_height": "0.4", + "wall_loops": "2", + "bottom_shell_layers": "3", + "top_shell_layers": "3", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "outer_wall_speed": "120", + "inner_wall_speed": "150", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "150", + "top_surface_speed": "150", + "gap_infill_speed": "50", + "bridge_speed": "30", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Qidi/process/fdm_process_common.json b/resources/profiles/Qidi/process/fdm_process_common.json index f8d6a865f77..779c5b1ddf3 100644 --- a/resources/profiles/Qidi/process/fdm_process_common.json +++ b/resources/profiles/Qidi/process/fdm_process_common.json @@ -25,13 +25,13 @@ "gap_infill_speed": "30", "infill_combination": "0", "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "25%", + "infill_wall_overlap": "15%", "sparse_infill_speed": "50", "interface_shells": "0", "detect_overhang_wall": "0", "reduce_infill_retraction": "0", - "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", - "wall_loops": "3", + "filename_format": "{input_filename_base}_{print_time}.gcode", + "wall_loops": "2", "inner_wall_line_width": "0.45", "inner_wall_speed": "40", "print_settings_id": "", @@ -54,13 +54,14 @@ "support_interface_top_layers": "2", "support_interface_spacing": "0", "support_interface_speed": "80", - "support_base_pattern": "rectilinear", + "support_interface_pattern": "auto", + "support_base_pattern": "default", "support_base_pattern_spacing": "2", "support_speed": "40", "support_threshold_angle": "40", "support_object_xy_distance": "0.5", "detect_thin_wall": "0", - "top_surface_line_width": "0.4", + "top_surface_line_width": "0.42", "top_surface_speed": "30", "travel_speed": "400", "enable_prime_tower": "0", diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_common.json index 5edeca4933d..1f0df8f0b98 100644 --- a/resources/profiles/Qidi/process/fdm_process_qidi_common.json +++ b/resources/profiles/Qidi/process/fdm_process_qidi_common.json @@ -97,7 +97,7 @@ "travel_speed": "150", "enable_prime_tower": "0", "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", + "prime_tower_width": "35", "xy_hole_compensation": "0", "xy_contour_compensation": "0" } diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json index bf373c0c959..9c75621c49c 100644 --- a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json +++ b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json @@ -2,39 +2,115 @@ "type": "process", "name": "fdm_process_qidi_x3_common", "from": "system", - "instantiation": "false", - "inherits": "fdm_process_qidi_common", - "default_acceleration": "7000", - "top_surface_acceleration": "5000", - "initial_layer_acceleration": "1000", - "travel_acceleration": "10000", - "inner_wall_acceleration": "7000", - "outer_wall_acceleration": "5000", - "travel_speed": "500", - "initial_layer_speed": "50", - "initial_layer_infill_speed": "80", - "outer_wall_speed": "150", - "inner_wall_speed": "200", - "internal_solid_infill_speed": "200", - "top_surface_speed": "120", - "gap_infill_speed": "150", - "sparse_infill_speed": "300", - "support_speed": "80", - "support_interface_speed": "100%", - "ironing_speed": "15", - "bridge_speed": "25", - "internal_bridge_speed" : "70", - "default_jerk": "9", - "initial_layer_jerk": "9", - "outer_wall_jerk": "7", - "infill_jerk": "12", - "travel_jerk": "12", - "inner_wall_jerk": "7", - "top_surface_jerk": "9", - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "overhang_1_4_speed": "80%", + "inherits": "fdm_process_common", + "instantiation": "false", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "50", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "10000", + "bridge_no_support": "1", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "enable_arc_fitting": "1", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "120", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "30", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "sparse_infill_speed": "250", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10" + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "150", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "seam_gap": "15%", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "2000", + "top_surface_speed": "200", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "wall_generator": "classic", + "gcode_label_objects": "0", + "internal_bridge_speed": "50", + "internal_solid_infill_pattern": "zig-zag", + "initial_layer_travel_speed": "50%" }