diff --git a/resources/data/hints.ini b/resources/data/hints.ini index 03f88b0388f..6b1b9da695c 100644 --- a/resources/data/hints.ini +++ b/resources/data/hints.ini @@ -164,6 +164,10 @@ documentation_link= https://wiki.bambulab.com/en/software/bambu-studio/reduce-wa [hint:Improve strength] text = Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model? +[hint:When need to print with the printer door opened] +text = When need to print with the printer door opened\nOpening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature. More info about this in the Wiki. +documentation_link= https://wiki.bambulab.com/en/filament-acc/filament/heat-creep + #[hint:] #text = #hypertext = diff --git a/resources/info/filament_info.json b/resources/info/filament_info.json new file mode 100644 index 00000000000..673e1a89a7a --- /dev/null +++ b/resources/info/filament_info.json @@ -0,0 +1,27 @@ +{ + "version": "1.0.0.1", + "high_temp_filament": [ + "ABS", + "ASA", + "PC", + "PA", + "PA-CF", + "PA6-CF", + "PET-CF", + "PPS", + "PPS-CF", + "PPA-CF", + "PPA-GF" + ], + "low_temp_filament": [ + "PLA", + "TPU", + "PLA-CF", + "PLA-AERO", + "PVA" + ], + "high_low_compatible_filament":[ + "HIPS", + "PETG" + ] +} \ No newline at end of file diff --git a/resources/info/nozzle_info.json b/resources/info/nozzle_info.json new file mode 100644 index 00000000000..e5e6631c09f --- /dev/null +++ b/resources/info/nozzle_info.json @@ -0,0 +1,9 @@ +{ + "version": "1.0.0.1", + "nozzle_hrc": { + "hardened_steel": 55, + "stainless_steel": 20, + "brass": 2, + "undefine": 0 + } +} \ No newline at end of file diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index 3878929990a..50cb96327e8 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -1,7 +1,7 @@ { "name": "Bambulab", "url": "http://www.bambulab.com/Parameters/vendor/BBL.json", - "version": "01.07.00.25", + "version": "01.07.00.29", "force_update": "0", "description": "the initial version of BBL configurations", "machine_model_list": [ @@ -24,6 +24,10 @@ { "name": "Bambu Lab A1 mini", "sub_path": "machine/Bambu Lab A1 mini.json" + }, + { + "name": "Bambu Lab X1E", + "sub_path": "machine/Bambu Lab X1E.json" } ], "process_list": [ @@ -1317,6 +1321,10 @@ "name": "Bambu PA-CF @BBL P1P", "sub_path": "filament/P1P/Bambu PA-CF @BBL P1P.json" }, + { + "name": "Generic PA-CF @BBL X1E", + "sub_path": "filament/Generic PA-CF @BBL X1E.json" + }, { "name": "Bambu PAHT-CF @BBL X1C", "sub_path": "filament/Bambu PAHT-CF @BBL X1C.json" @@ -1337,6 +1345,10 @@ "name": "Bambu PA6-CF @BBL X1C", "sub_path": "filament/Bambu PA6-CF @BBL X1C.json" }, + { + "name": "Bambu PA6-CF @BBL X1E", + "sub_path": "filament/Bambu PA6-CF @BBL X1E.json" + }, { "name": "Generic HIPS @BBL X1C", "sub_path": "filament/Generic HIPS @BBL X1C.json" @@ -1353,6 +1365,18 @@ "name": "Generic HIPS @BBL A1M 0.2 nozzle", "sub_path": "filament/Generic HIPS @BBL A1M 0.2 nozzle.json" }, + { + "name": "Generic PPS-CF @BBL X1E", + "sub_path": "filament/Generic PPS-CF @BBL X1E.json" + }, + { + "name": "Generic PPS @BBL X1E", + "sub_path": "filament/Generic PPS @BBL X1E.json" + }, + { + "name": "Generic PPA-CF @BBL X1E", + "sub_path": "filament/Generic PPA-CF @BBL X1E.json" + }, { "name": "Generic PPA-CF @BBL X1C", "sub_path": "filament/Generic PPA-CF @BBL X1C.json" @@ -1361,6 +1385,10 @@ "name": "Generic PPA-GF @BBL X1C", "sub_path": "filament/Generic PPA-GF @BBL X1C.json" }, + { + "name": "Generic PPA-GF @BBL X1E", + "sub_path": "filament/Generic PPA-GF @BBL X1E.json" + }, { "name": "PolyTerra PLA @BBL X1C 0.2 nozzle", "sub_path": "filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json" @@ -1433,6 +1461,10 @@ "name": "Bambu PETG-CF @BBL A1M 0.4 nozzle", "sub_path": "filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json" }, + { + "name": "Bambu PET-CF @BBL X1E", + "sub_path": "filament/Bambu PET-CF @BBL X1E.json" + }, { "name": "PolyLite PETG @BBL X1C 0.2 nozzle", "sub_path": "filament/PolyLite PETG @BBL X1C 0.2 nozzle.json" @@ -1445,6 +1477,30 @@ "name": "PolyLite PETG @BBL A1M 0.2 nozzle", "sub_path": "filament/PolyLite PETG @BBL A1M 0.2 nozzle.json" }, + { + "name": "Bambu ABS @BBL X1E", + "sub_path": "filament/Bambu ABS @BBL X1E.json" + }, + { + "name": "Bambu ABS @BBL X1E 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL X1E 0.8 nozzle", + "sub_path": "filament/Bambu ABS @BBL X1E 0.8 nozzle.json" + }, + { + "name": "Generic ABS @BBL X1E", + "sub_path": "filament/Generic ABS @BBL X1E.json" + }, + { + "name": "Generic ABS @BBL X1E 0.2 nozzle", + "sub_path": "filament/Generic ABS @BBL X1E 0.2 nozzle.json" + }, + { + "name": "PolyLite ABS @BBL X1E", + "sub_path": "filament/PolyLite ABS @BBL X1E.json" + }, { "name": "PolyLite ABS @BBL X1C 0.2 nozzle", "sub_path": "filament/PolyLite ABS @BBL X1C 0.2 nozzle.json" @@ -1457,33 +1513,97 @@ "name": "Bambu PC @BBL P1S", "sub_path": "filament/Bambu PC @BBL P1S.json" }, + { + "name": "Bambu PC @BBL X1E", + "sub_path": "filament/Bambu PC @BBL X1E.json" + }, { "name": "Bambu PC @BBL P1S 0.2 nozzle", "sub_path": "filament/Bambu PC @BBL P1S 0.2 nozzle.json" }, + { + "name": "Bambu PC @BBL X1E 0.2 nozzle", + "sub_path": "filament/Bambu PC @BBL X1E 0.2 nozzle.json" + }, { "name": "Bambu PC @BBL P1S 0.8 nozzle", "sub_path": "filament/Bambu PC @BBL P1S 0.8 nozzle.json" }, + { + "name": "Bambu PC @BBL X1E 0.8 nozzle", + "sub_path": "filament/Bambu PC @BBL X1E 0.8 nozzle.json" + }, { "name": "Bambu PC @BBL P1S 0.6 nozzle", "sub_path": "filament/Bambu PC @BBL P1S 0.6 nozzle.json" }, + { + "name": "Bambu PC @BBL X1E 0.6 nozzle", + "sub_path": "filament/Bambu PC @BBL X1E 0.6 nozzle.json" + }, { "name": "Generic PC @BBL P1S 0.2 nozzle", "sub_path": "filament/Generic PC @BBL P1S 0.2 nozzle.json" }, + { + "name": "Generic PC @BBL X1E 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL X1E 0.2 nozzle.json" + }, { "name": "Generic PC @BBL P1S", "sub_path": "filament/Generic PC @BBL P1S.json" }, + { + "name": "Generic PC @BBL X1E", + "sub_path": "filament/Generic PC @BBL X1E.json" + }, + { + "name": "Generic ASA @BBL X1E 0.2 nozzle", + "sub_path": "filament/Generic ASA @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL X1E", + "sub_path": "filament/Generic ASA @BBL X1E.json" + }, + { + "name": "Bambu ASA @BBL X1E", + "sub_path": "filament/Bambu ASA @BBL X1E.json" + }, + { + "name": "Bambu ASA @BBL X1E 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL X1E 0.4 nozzle", + "sub_path": "filament/Bambu ASA @BBL X1E 0.4 nozzle.json" + }, { "name": "PolyLite ASA @BBL X1C 0.2 nozzle", "sub_path": "filament/PolyLite ASA @BBL X1C 0.2 nozzle.json" }, + { + "name": "PolyLite ASA @BBL X1E", + "sub_path": "filament/PolyLite ASA @BBL X1E.json" + }, { "name": "PolyLite ASA @BBL P1P 0.2 nozzle", "sub_path": "filament/PolyLite ASA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu Support G @BBL X1E", + "sub_path": "filament/Bambu Support G @BBL X1E.json" + }, + { + "name": "Bambu PA-CF @BBL X1E", + "sub_path": "filament/Bambu PA-CF @BBL X1E.json" + }, + { + "name": "PolyLite ABS @BBL X1E 0.2 nozzle", + "sub_path": "filament/PolyLite ABS @BBL X1E 0.2 nozzle.json" + }, + { + "name": "PolyLite ASA @BBL X1E 0.2 nozzle", + "sub_path": "filament/PolyLite ASA @BBL X1E 0.2 nozzle.json" } ], "machine_list": [ @@ -1515,6 +1635,10 @@ "name": "Bambu Lab A1 mini 0.4 nozzle", "sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle.json" }, + { + "name": "Bambu Lab X1E 0.4 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.4 nozzle.json" + }, { "name": "Bambu Lab X1 Carbon 0.2 nozzle", "sub_path": "machine/Bambu Lab X1 Carbon 0.2 nozzle.json" @@ -1574,6 +1698,18 @@ { "name": "Bambu Lab A1 mini 0.8 nozzle", "sub_path": "machine/Bambu Lab A1 mini 0.8 nozzle.json" + }, + { + "name": "Bambu Lab X1E 0.2 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.2 nozzle.json" + }, + { + "name": "Bambu Lab X1E 0.6 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.6 nozzle.json" + }, + { + "name": "Bambu Lab X1E 0.8 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.8 nozzle.json" } ] -} \ No newline at end of file +} diff --git a/resources/profiles/BBL/Bambu Lab X1E_cover.png b/resources/profiles/BBL/Bambu Lab X1E_cover.png new file mode 100644 index 00000000000..1daaf9c3a9c Binary files /dev/null and b/resources/profiles/BBL/Bambu Lab X1E_cover.png differ diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json new file mode 100644 index 00000000000..97c7af9a104 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Bambu ABS @BBL X1E 0.2 nozzle", + "inherits": "Bambu ABS @BBL X1C 0.2 nozzle", + "from": "system", + "setting_id": "GFSB00_05", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json new file mode 100644 index 00000000000..6f5d353dedc --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Bambu ABS @BBL X1E 0.8 nozzle", + "inherits": "Bambu ABS @BBL X1C 0.8 nozzle", + "from": "system", + "setting_id": "GFSB00_06", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json new file mode 100644 index 00000000000..e281fa40321 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu ABS @BBL X1E", + "inherits": "Bambu ABS @BBL X1C", + "from": "system", + "setting_id": "GFSB00_04", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json new file mode 100644 index 00000000000..a2a1ee66dde --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Bambu ASA @BBL X1E 0.2 nozzle", + "inherits": "Bambu ASA @BBL X1C 0.2 nozzle", + "from": "system", + "setting_id": "GFSB01_06", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json new file mode 100644 index 00000000000..795272b92d8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu ASA @BBL X1E 0.4 nozzle", + "inherits": "Bambu ASA @BBL X1C 0.4 nozzle", + "from": "system", + "setting_id": "GFSB01_07", + "instantiation": "true", + "chamber_temperatures": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json new file mode 100644 index 00000000000..9d15dcb1c25 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Bambu ASA @BBL X1E", + "inherits": "Bambu ASA @BBL X1C", + "from": "system", + "setting_id": "GFSB01_05", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1E.json new file mode 100644 index 00000000000..56aecc4f50f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Bambu PA-CF @BBL X1E", + "inherits": "Bambu PA-CF @BBL X1C", + "from": "system", + "setting_id": "GFSN03_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1E.json new file mode 100644 index 00000000000..98cd1f76214 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL X1E", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json index 6d4344b3a7f..8e02c61fdbe 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json @@ -17,6 +17,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.2 nozzle.json new file mode 100644 index 00000000000..a89ee103c47 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu PC @BBL X1E 0.2 nozzle", + "inherits": "Bambu PC @BBL X1C 0.2 nozzle", + "from": "system", + "setting_id": "GFSC00_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.6 nozzle.json new file mode 100644 index 00000000000..3464603199d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.6 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu PC @BBL X1E 0.6 nozzle", + "inherits": "Bambu PC @BBL X1C 0.6 nozzle", + "from": "system", + "setting_id": "GFSC00_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.8 nozzle.json new file mode 100644 index 00000000000..1930bde03d1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.8 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu PC @BBL X1E 0.8 nozzle", + "inherits": "Bambu PC @BBL X1C 0.8 nozzle", + "from": "system", + "setting_id": "GFSC00_11", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E.json new file mode 100644 index 00000000000..75cdf76d8e9 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Bambu PC @BBL X1E", + "inherits": "Bambu PC @BBL X1C", + "from": "system", + "setting_id": "GFSC00_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1E.json new file mode 100644 index 00000000000..44be4cef2c5 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Bambu PET-CF @BBL X1E", + "inherits": "Bambu PET-CF @BBL X1C", + "from": "system", + "setting_id": "GFST01_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json index f1e94f7f99c..c7dd9923cd5 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json @@ -12,6 +12,7 @@ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json index e12b65d701e..0a24cb5a1a3 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json @@ -22,6 +22,8 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1P 0.8 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json index c40928fb491..d68745bb17e 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json @@ -12,6 +12,7 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json index 95c2cc329c1..d0ea93c38c7 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json @@ -5,12 +5,25 @@ "from": "system", "setting_id": "GFSG50_02", "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], "filament_max_volumetric_speed": [ - "13" + "11.5" + ], + "overhang_fan_speed": [ + "100" ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json index 22c4caf1093..8d0e7ce354e 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json @@ -5,12 +5,29 @@ "from": "system", "setting_id": "GFSG50_01", "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_max_volumetric_speed": [ + "11.5" + ], + "overhang_fan_speed": [ + "100" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json index 5263e70059d..31b96e91b0c 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json @@ -66,7 +66,7 @@ "6" ], "temperature_vitrification": [ - "75" + "70" ], "textured_plate_temp": [ "70" diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json index 5e72c32a961..f3160585a68 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json @@ -17,6 +17,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json index 7dbd8945264..ddaeb7a6161 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json index 7e98cd452b8..d8d8307fc02 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json @@ -10,6 +10,7 @@ ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json index d5cb0165b34..2cb005d6f5d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json @@ -12,6 +12,8 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json index d8e67b7b168..4199fd943df 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json @@ -11,6 +11,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json index 724412a7380..824e96a5e30 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json index 4764dde4522..7e2d1f4fc95 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json @@ -10,6 +10,7 @@ ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json index 0351e674a06..a7e1e76634a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json @@ -12,6 +12,8 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json index 75ef9a15add..7ed6ab8f3ea 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json index 1739a9ebdcd..91995ef0691 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json @@ -14,6 +14,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json index 2ce7e49f443..85c560fcdb6 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json index a4ecedcc8ac..5d759343108 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json @@ -11,6 +11,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json index 7d18fcfe2ad..fdc02d06c5e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json @@ -11,6 +11,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json index 85fdd478468..eb6f63a2f31 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json index 78626f437c4..418cc8f9ca3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json @@ -14,6 +14,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json index e9017e3513c..3b5c25a41fc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json @@ -20,6 +20,8 @@ "Bambu Lab X1 0.6 nozzle", "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json index f22fe330cec..c917e0745aa 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json @@ -17,6 +17,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json index f9639590896..bcf6a2ad8f8 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json @@ -17,6 +17,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json index b7a0f007a58..cf064eb4de7 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json @@ -17,6 +17,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json index 52fa72bd5b7..d136f6380d3 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json @@ -14,6 +14,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL X1E.json b/resources/profiles/BBL/filament/Bambu Support G @BBL X1E.json new file mode 100644 index 00000000000..043f8661f74 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Bambu Support G @BBL X1E", + "inherits": "Bambu Support G @BBL X1C", + "from": "system", + "setting_id": "GFSS01_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json index b7ecb14a81f..1b18733d101 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json @@ -17,6 +17,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json index ebd8d00134e..206d74ec83c 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json @@ -11,6 +11,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json index 838fc4eb2ea..0916bf63a5a 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json @@ -14,6 +14,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL X1E 0.2 nozzle.json new file mode 100644 index 00000000000..217ee39225d --- /dev/null +++ b/resources/profiles/BBL/filament/Generic ABS @BBL X1E 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic ABS @BBL X1E 0.2 nozzle", + "inherits": "Generic ABS @0.2 nozzle", + "from": "system", + "setting_id": "GFSB99_04", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL X1E.json b/resources/profiles/BBL/filament/Generic ABS @BBL X1E.json new file mode 100644 index 00000000000..f8755a9f65a --- /dev/null +++ b/resources/profiles/BBL/filament/Generic ABS @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Generic ABS @BBL X1E", + "inherits": "Generic ABS", + "from": "system", + "setting_id": "GFSB99_03", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL X1E 0.2 nozzle.json new file mode 100644 index 00000000000..758d7aa64bf --- /dev/null +++ b/resources/profiles/BBL/filament/Generic ASA @BBL X1E 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic ASA @BBL X1E 0.2 nozzle", + "inherits": "Generic ASA @0.2 nozzle", + "from": "system", + "setting_id": "GFSB98_01", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL X1E.json b/resources/profiles/BBL/filament/Generic ASA @BBL X1E.json new file mode 100644 index 00000000000..c93c41ffb7e --- /dev/null +++ b/resources/profiles/BBL/filament/Generic ASA @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Generic ASA @BBL X1E", + "inherits": "Generic ASA", + "from": "system", + "setting_id": "GFSB98_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json index ea504f770a7..f4f53fb2d3f 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json @@ -12,6 +12,7 @@ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json index cf3280305bc..98907127387 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json @@ -17,6 +17,9 @@ "Bambu Lab P1P 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL X1E.json new file mode 100644 index 00000000000..6c2b48142fa --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Generic PA-CF @BBL X1E", + "inherits": "Generic PA-CF", + "from": "system", + "setting_id": "GFSN98_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA.json b/resources/profiles/BBL/filament/Generic PA.json index 2fb23d17055..ac30ee54092 100644 --- a/resources/profiles/BBL/filament/Generic PA.json +++ b/resources/profiles/BBL/filament/Generic PA.json @@ -30,6 +30,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL X1E 0.2 nozzle.json new file mode 100644 index 00000000000..ed8ebb495eb --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PC @BBL X1E 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Generic PC @BBL X1E 0.2 nozzle", + "inherits": "Generic PC @0.2 nozzle", + "from": "system", + "setting_id": "GFSC99_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL X1E.json b/resources/profiles/BBL/filament/Generic PC @BBL X1E.json new file mode 100644 index 00000000000..9d8c61a9783 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PC @BBL X1E.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Generic PC @BBL X1E", + "inherits": "Generic PC", + "from": "system", + "setting_id": "GFSC99_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json index ce6645dbf15..0c415d98449 100644 --- a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json index cd1ddd97803..59be4dea79e 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json @@ -5,6 +5,21 @@ "from": "system", "setting_id": "GFSG50", "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_max_volumetric_speed": [ + "11.5" + ], + "overhang_fan_speed": [ + "100" + ], "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", @@ -14,6 +29,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @base.json b/resources/profiles/BBL/filament/Generic PETG-CF @base.json index c794c3566c7..a8aa4714a73 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @base.json @@ -66,7 +66,7 @@ "6" ], "temperature_vitrification": [ - "75" + "70" ], "textured_plate_temp": [ "70" diff --git a/resources/profiles/BBL/filament/Generic PETG.json b/resources/profiles/BBL/filament/Generic PETG.json index 50827d352fa..4052484a568 100644 --- a/resources/profiles/BBL/filament/Generic PETG.json +++ b/resources/profiles/BBL/filament/Generic PETG.json @@ -14,6 +14,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json index 734c0d5faf0..d80a580773b 100644 --- a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json @@ -11,7 +11,8 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json index b5312c39f67..51a76c165a9 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json index ca0e526bdf6..f2e682804f1 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json @@ -12,11 +12,14 @@ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", "Bambu Lab X1 0.6 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk.json b/resources/profiles/BBL/filament/Generic PLA Silk.json index 183cea5d653..c1011d708ba 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk.json @@ -20,6 +20,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF.json b/resources/profiles/BBL/filament/Generic PLA-CF.json index d1c4a8e9bde..b4e3affc2c1 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF.json @@ -14,6 +14,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA.json b/resources/profiles/BBL/filament/Generic PLA.json index 800947d83a9..70ccc0d9840 100644 --- a/resources/profiles/BBL/filament/Generic PLA.json +++ b/resources/profiles/BBL/filament/Generic PLA.json @@ -14,7 +14,10 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1E.json new file mode 100644 index 00000000000..b0326275612 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1E.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "Generic PPA-CF @BBL X1E", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_01", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_type": [ + "PPA-CF" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1C.json index 39cd2763d94..77734ba4fc8 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1C.json @@ -5,12 +5,6 @@ "from": "system", "setting_id": "GFSN96_00", "instantiation": "true", - "filament_max_volumetric_speed": [ - "8" - ], - "filament_type": [ - "PPA-GF" - ], "filament_vendor": [ "Bambu Lab" ], diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1E.json new file mode 100644 index 00000000000..bc2a85caf0c --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1E.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "Generic PPA-GF @BBL X1E", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_01", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPS @BBL X1E.json new file mode 100644 index 00000000000..9afaeeb5ea2 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPS @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Generic PPS @BBL X1E", + "inherits": "Generic PPS @base", + "from": "system", + "setting_id": "GFST97_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPS-CF @BBL X1E.json new file mode 100644 index 00000000000..929ccff925d --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PPS-CF @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Generic PPS-CF @BBL X1E", + "inherits": "Generic PPS-CF @base", + "from": "system", + "setting_id": "GFST98_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json index 63afb9af102..6df4727ea01 100644 --- a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA.json b/resources/profiles/BBL/filament/Generic PVA.json index fe621b3df78..7db3aac32bf 100644 --- a/resources/profiles/BBL/filament/Generic PVA.json +++ b/resources/profiles/BBL/filament/Generic PVA.json @@ -14,6 +14,9 @@ "Bambu Lab X1 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU.json b/resources/profiles/BBL/filament/Generic TPU.json index b8b689644f5..273e9175708 100644 --- a/resources/profiles/BBL/filament/Generic TPU.json +++ b/resources/profiles/BBL/filament/Generic TPU.json @@ -18,7 +18,10 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json index 75e17fe8c8d..4ffd147c385 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 0.2 nozzle", "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json index 421c52ff846..7d5a7ecd576 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json @@ -11,6 +11,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json index d8e4eb51165..80f5acd18e5 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json b/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json index 28e21b831e4..15c06a2ca6b 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json @@ -11,6 +11,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json index 4904cf0b104..ccbfad93a50 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json @@ -5,8 +5,20 @@ "from": "system", "setting_id": "GFSG50_03", "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], "filament_max_volumetric_speed": [ - "13" + "11.5" + ], + "overhang_fan_speed": [ + "100" ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle" diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json index fe4edb3f3d1..a0a6388bcc8 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json @@ -5,6 +5,21 @@ "from": "system", "setting_id": "GFSG50_11", "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_max_volumetric_speed": [ + "11.5" + ], + "overhang_fan_speed": [ + "100" + ], "compatible_printers": [ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab P1P 0.8 nozzle" diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json index 927e839529e..bdf73897b32 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json @@ -5,9 +5,21 @@ "from": "system", "setting_id": "GFSG98_00", "instantiation": "true", + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "0" + ], "filament_max_volumetric_speed": [ "8" ], + "overhang_fan_speed": [ + "90" + ], "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", "Bambu Lab A1 mini 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json index bf4c3ae6d8c..3bf940e25a5 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json @@ -5,6 +5,21 @@ "from": "system", "setting_id": "GFSG50_10", "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_max_volumetric_speed": [ + "11.5" + ], + "overhang_fan_speed": [ + "100" + ], "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab P1P 0.6 nozzle", diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E 0.2 nozzle.json new file mode 100644 index 00000000000..ceb5d54a402 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E 0.2 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL X1E 0.2 nozzle", + "inherits": "PolyLite ABS @BBL X1C 0.2 nozzle", + "from": "system", + "setting_id": "GFSB60_03", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E.json new file mode 100644 index 00000000000..ae174b951fc --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL X1E", + "inherits": "PolyLite ABS @BBL X1C", + "from": "system", + "setting_id": "GFSB60_01", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E 0.2 nozzle.json new file mode 100644 index 00000000000..7c9c00acac7 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL X1E 0.2 nozzle", + "inherits": "PolyLite ASA @BBL X1E", + "from": "system", + "setting_id": "GFSB61_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E.json new file mode 100644 index 00000000000..2d259d6dc13 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL X1E", + "inherits": "PolyLite ASA @BBL X1C", + "from": "system", + "setting_id": "GFSB61_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json index 9d3d627736e..9420b28be2f 100644 --- a/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json @@ -6,7 +6,7 @@ "setting_id": "GFSG60_02", "instantiation": "true", "filament_max_volumetric_speed": [ - "11" + "11.5" ], "hot_plate_temp": [ "80" diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json index 9a58b91bfb1..5bf2589627d 100644 --- a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json index ea9688b83e3..23c03119567 100644 --- a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json @@ -6,7 +6,7 @@ "setting_id": "GFSG60_00", "instantiation": "true", "filament_max_volumetric_speed": [ - "11" + "11.5" ], "nozzle_temperature_range_high": [ "270" @@ -20,6 +20,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json index 353f029cbc3..e8a41572287 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json index e214da24dfe..c9c27d91431 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json @@ -14,6 +14,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json index 123f71d69eb..ed5b54fb101 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json index 2925ff8bbf1..c3444436a25 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json @@ -14,6 +14,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json index 25394b7ff7b..b05b011f21b 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json index 686d1dd3cb6..551e467844b 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json @@ -11,6 +11,9 @@ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pla.json b/resources/profiles/BBL/filament/fdm_filament_pla.json index 82288271029..a93b981098f 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pla.json +++ b/resources/profiles/BBL/filament/fdm_filament_pla.json @@ -59,7 +59,7 @@ "220" ], "temperature_vitrification": [ - "55" + "45" ], "nozzle_temperature_range_low": [ "190" diff --git a/resources/profiles/BBL/filament/fdm_filament_pva.json b/resources/profiles/BBL/filament/fdm_filament_pva.json index 870a18368f2..7d0bdf1b4a7 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pva.json +++ b/resources/profiles/BBL/filament/fdm_filament_pva.json @@ -77,7 +77,7 @@ "50" ], "temperature_vitrification": [ - "55" + "45" ], "textured_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/fdm_filament_tpu.json b/resources/profiles/BBL/filament/fdm_filament_tpu.json index 126c101399a..8ec0a4fec3d 100644 --- a/resources/profiles/BBL/filament/fdm_filament_tpu.json +++ b/resources/profiles/BBL/filament/fdm_filament_tpu.json @@ -65,7 +65,7 @@ "1" ], "temperature_vitrification": [ - "35" + "30" ], "textured_plate_temp": [ "35" diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json index d8cea995153..d6e55aa133f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json @@ -27,6 +27,7 @@ "Bambu Lab P1S 0.2 nozzle", "Bambu Lab P1P 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json index ea20be58cb1..fe6a5d32877 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json @@ -56,11 +56,12 @@ "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1P 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ], - "machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20230912 =====================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG392 S0 ;turn off clog detect\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S2 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;M221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM1002 gcode_claim_action : 1\nM400\nM18\nM109 S100\nM104 S140\nM400\nM17\nM400\nG28 X\n\nM221 X0 Y0 Z0 ;turn off soft endstop\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n G392 S1 ;turn on clog detect\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-13.5 F3000\n M400\n M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M104 S{nozzle_temperature_range_high[initial_no_support_extruder]}\n G92 E0\n G1 E50 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M400\n M106 P1 S178\n G92 E0\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G92 E0\n G1 E-0.5 F300\n\n G1 X0 F30000\n G1 X-13.5 F3000\n G1 X0 F30000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X0 F30000\n G1 X-13.5 F3000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G392 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X50 Y175 F20000 ; find a soft place to home\nM104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-80}\n\nG1 X90 Y-1 Z5 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A5 B55 C85 H15 K0 M20 O2\n;M970.3 Q0 A7 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n;M106 S255\nG29.2 S0 ; turn off ABL\nG0 X50 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\n\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\n\nG0 X85 Y185 F10000 ;move to exposed steel surface and stop the nozzle\nG0 Z-1.01 F10000\nG91\n\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z5 F30000\nG1 X32 Y185 F30000.1 ;Brush material\nG1 Z0.6 F30000.1\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\n\nG90\nM83\n\nG1 Z10\nG1 X85 Y185\nG1 Z-1.01\n\n\nM221 R; pop softend status\n\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== wait heatbed ====================\nM1002 gcode_claim_action : 2\nM104 S0\nM190 S[bed_temperature_initial_layer_single];set bed temp\nM109 S140\n\nG1 Z5 F3000\nG29.2 S1\nG1 X10 Y10 F20000\n\n;===== bed leveling ==================================\n;M1002 set_flag g29_before_print_flag=1\nM1002 judge_flag g29_before_print_flag\nM622 J1\n M1002 gcode_claim_action : 1\n G29 A\n M400\n M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\n\nG1 X-13.5 Y0 Z10 F10000\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S{nozzle_temperature[initial_extruder]}\nM400\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\n\nG392 S1 ;turn on clog detect\n\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\nM622 J1\n M1002 gcode_claim_action : 8\n \n M400\n M900 K0.0 L1000.0 M1.0\n G90\n M83\n G0 X45 Y-4 F30000\n G0 Z0.2 F18000 ;Move to start position\n G0 X65 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X70 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X75 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X80 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X85 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X90 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X95 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X100 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X105 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X110 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X115 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X120 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X125 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X130 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n M400\n \n G1 X-13.5 Y0 Z10 F10000\n M400\n \n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;===== extrude cali test ===============================\nG90\nM83\nG0 X50 Y-2.7 F30000\nG0 Z0.2 F18000 ;Move to start position\nG0 X60 E4 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X65 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X70 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X75 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X80 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X85 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X90 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X95 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X100 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X105 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X110 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X115 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X120 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X125 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X130 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nM400\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\n\nM400 ; wait all motion done before implement the emprical L parameters\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\n", + "machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20231010 =====================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S150\nM140 S[bed_temperature_initial_layer_single]\nG392 S0 ;turn off clog detect\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S2 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM1002 gcode_claim_action : 1\nM400\nM18\nM109 S100 H150\nM104 S150\nM400\nM17\nM400\nG28 X\n\nM211 X0 Y0 Z0 ;turn off soft endstop ; turn off soft endstop to prevent protential logic problem\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n G392 S1 ;turn on clog detect\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-13.5 F3000\n M400\n M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M104 S{nozzle_temperature_range_high[initial_no_support_extruder]}\n G92 E0\n G1 E50 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M400\n M106 P1 S178\n G92 E0\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G92 E0\n G1 E-0.5 F300\n\n G1 X0 F30000\n G1 X-13.5 F3000\n G1 X0 F30000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X0 F30000\n G1 X-13.5 F3000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G392 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X50 Y175 F20000 ; find a soft place to home\nM104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-65}\n\nG1 X90 Y-1 Z5 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A5 B50 C90 H15 K0 M20 O3\n;M970.3 Q0 A7 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n;M106 S255\nG29.2 S0 ; turn off ABL\nG0 X50 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\n\nM104 S150 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 Z0 ;turn off Z axis endstop\n\nG0 X85 Y185 F10000 ;move to exposed steel surface and stop the nozzle\nG0 Z-1.01 F10000\nG91\n\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z5 F30000\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.6 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\n\nG90\nM83\n\nG1 Z10\nG1 X85 Y185\nG1 Z-1.01\nG1 X95\nG1 X90\n\n\nM211 R; pop softend status\n\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== wait heatbed ====================\nM1002 gcode_claim_action : 2\nM104 S0\nM190 S[bed_temperature_initial_layer_single];set bed temp\nM109 S150\n\nG1 Z5 F3000\nG29.2 S1\nG1 X10 Y10 F20000\n\n;===== bed leveling ==================================\n;M1002 set_flag g29_before_print_flag=1\nM1002 judge_flag g29_before_print_flag\nM622 J1\n M1002 gcode_claim_action : 1\n G29 A T155 ;set high than the wipe temperature\n M400\n M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28 T155\n\nM623\n\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\n\nG1 X-13.5 Y0 Z10 F10000\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S{nozzle_temperature[initial_extruder]}\nM400\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\n\nG392 S1 ;turn on clog detect\n\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\nM622 J1\n M1002 gcode_claim_action : 8\n \n M400\n M900 K0.0 L1000.0 M1.0\n G90\n M83\n G0 X68 Y-4 F30000\n G0 Z0.2 F18000 ;Move to start position\n G0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 Y0 Z0 F20000\n M400\n \n G1 X-13.5 Y0 Z10 F10000\n M400\n \n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;===== extrude cali test ===============================\nG90\nM83\nG0 X68 Y-2.5 F30000\nG0 Z0.2 F18000 ;Move to start position\nG0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X115 Z0 F20000\nG0 Z5\nM400\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\n\nM400 ; wait all motion done before implement the emprical L parameters\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\n", "machine_end_gcode": ";===== date: 20230912 =====================\n;turn off nozzle clog detect\nG392 S0\n\n{if timelapse_type == 2}\nM991 S0 P-1 ;end timelapse immediately\n{endif}\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 F12000 ; move to safe pos \n{if timelapse_type == 1}\nM991 S0 P-1 ;end timelapse at safe pos\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X181 F12000\nT255\nG1 X0 F18000\nG1 X-13.0 F3000\nG1 X0 F18000 ; wipe\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 180}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z180 F600\n G1 Z180\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-13 Y180 F3600\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M100 E42 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C46 D10 M100 E46 F10 N100\nM1006 A44 B20 L100 C39 D20 M100 E48 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E48 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B20 L100 C41 D20 M100 E49 F20 N100\nM1006 A0 B20 L100 C0 D20 M100 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M100 E37 F20 N100\nM1006 W\n;=====printer finish sound=========\nM400 S1\nM18\n", "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n", "time_lapse_gcode": "{if !spiral_mode && print_sequence != \"by object\"}\n;===================== date: 20230922 =====================\n; timelapse gcode\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\n{if layer_num == 2}\n M400\n G90\n M83\n M204 S5000\n G0 Z2 F4000\n G0 X-6 Y170 F20000\n M400 P200\n G39 S1\n G0 Z2 F4000\n G0 X90 Y90 F30000\n{endif}\n\n{endif}\n", - "change_filament_gcode": ";===== machine: A1 mini =========================\n;===== date: 20230913 =======================\nG392 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X180 F18000\n;{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n;{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\nG1 Y90 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\n; FLUSH_START\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E5 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\nG392 S1\n" + "change_filament_gcode": ";===== machine: A1 mini =========================\n;===== date: 20231012 =======================\nG392 S0\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X180 F18000\n;{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n;{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\nG1 Y90 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E5 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\nG392 S1\n" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json index 3ef6460dc4d..846a62c517c 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json @@ -10,6 +10,9 @@ ], "printer_model": "Bambu Lab A1 mini", "printer_variant": "0.6", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1M" + ], "default_print_profile": "0.30mm Standard @BBL A1M 0.6 nozzle", "max_layer_height": [ "0.42" @@ -28,6 +31,7 @@ "Bambu Lab P1S 0.6 nozzle", "Bambu Lab P1P 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle" + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json index 82fcdb81404..2c69cd34552 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json @@ -10,6 +10,9 @@ ], "printer_model": "Bambu Lab A1 mini", "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1M" + ], "default_print_profile": "0.40mm Standard @BBL A1M 0.8 nozzle", "max_layer_height": [ "0.56" @@ -28,6 +31,7 @@ "Bambu Lab P1S 0.8 nozzle", "Bambu Lab P1P 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json index 31aa9e7c851..da7b3beea75 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json @@ -26,7 +26,8 @@ "upward_compatible_machine": [ "Bambu Lab P1S 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ], "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json index 9f9fed3a532..097eb084e10 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json @@ -28,14 +28,12 @@ "machine_unload_filament_time": "28", "nozzle_type": "stainless_steel", "scan_first_layer": "0", - "z_hop": [ - "0.4" - ], "upward_compatible_machine": [ "Bambu Lab P1S 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ], "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json index e2e35ce5015..a9918192e1a 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json @@ -20,9 +20,6 @@ "min_layer_height": [ "0.12" ], - "z_hop": [ - "0.4" - ], "nozzle_type": "hardened_steel", "retraction_length": [ "1.4" @@ -33,7 +30,8 @@ "upward_compatible_machine": [ "Bambu Lab P1S 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle" + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ], "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json index 04375fdf738..9361311d895 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json @@ -24,16 +24,14 @@ "retract_length_toolchange": [ "3" ], - "z_hop": [ - "0.4" - ], "retraction_length": [ "3" ], "upward_compatible_machine": [ "Bambu Lab P1S 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ], "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json index 2ef87a37ad8..bbb6bcc4758 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json @@ -26,7 +26,8 @@ "upward_compatible_machine": [ "Bambu Lab P1P 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ], "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json index 8fd2c82da33..a148d661f07 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json @@ -27,14 +27,12 @@ "machine_unload_filament_time": "28", "nozzle_type": "stainless_steel", "scan_first_layer": "0", - "z_hop": [ - "0.4" - ], "upward_compatible_machine": [ "Bambu Lab P1P 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ], "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression", "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json index dbae519daac..a7c92573fa0 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json @@ -10,8 +10,8 @@ ], "printer_model": "Bambu Lab P1S", "printer_variant": "0.6", - "z_hop": [ - "0.4" + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C" ], "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", "max_layer_height": [ @@ -30,7 +30,8 @@ "upward_compatible_machine": [ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle" + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ], "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json index 8c48198d33c..f4196bd1688 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json @@ -10,9 +10,6 @@ ], "printer_model": "Bambu Lab P1S", "printer_variant": "0.8", - "z_hop": [ - "0.4" - ], "default_filament_profile": [ "Bambu PLA Basic @BBL X1" ], @@ -33,7 +30,8 @@ "upward_compatible_machine": [ "Bambu Lab P1P 0.6 nozzle", "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ], "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json index 5c0352f9bf3..c0dcb29ee2f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json @@ -26,7 +26,8 @@ "upward_compatible_machine": [ "Bambu Lab P1S 0.2 nozzle", "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle" + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ], "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json index d5532dd6baf..7bf7fc84025 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json @@ -28,13 +28,11 @@ "machine_unload_filament_time": "28", "nozzle_type": "stainless_steel", "scan_first_layer": "1", - "z_hop": [ - "0.4" - ], "upward_compatible_machine": [ "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle" + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ], "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json index b6e49250c07..87fa2b42c7e 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json @@ -10,8 +10,8 @@ ], "printer_model": "Bambu Lab X1", "printer_variant": "0.6", - "z_hop": [ - "0.4" + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1" ], "default_print_profile": "0.30mm Standard @BBL X1 0.6 nozzle", "max_layer_height": [ @@ -30,7 +30,8 @@ "upward_compatible_machine": [ "Bambu Lab P1S 0.6 nozzle", "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle" + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ], "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json index 6a3b52e5792..57396a8b043 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json @@ -10,8 +10,8 @@ ], "printer_model": "Bambu Lab X1", "printer_variant": "0.8", - "z_hop": [ - "0.4" + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1" ], "default_print_profile": "0.40mm Standard @BBL X1 0.8 nozzle", "max_layer_height": [ @@ -30,7 +30,8 @@ "upward_compatible_machine": [ "Bambu Lab P1S 0.8 nozzle", "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ], "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json index 84b682ce57e..15503fa8921 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json @@ -27,7 +27,8 @@ "upward_compatible_machine": [ "Bambu Lab P1S 0.2 nozzle", "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ], "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json index 8139efe731b..3d46a130dd3 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json @@ -26,14 +26,11 @@ "machine_load_filament_time": "29", "machine_unload_filament_time": "28", "scan_first_layer": "1", - "z_hop": [ - "0.4" - ], - "printer_structure": "corexy", "upward_compatible_machine": [ "Bambu Lab P1S 0.4 nozzle", "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle" + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ], "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json index 1aa8c946615..91f621db45f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json @@ -10,8 +10,8 @@ ], "printer_model": "Bambu Lab X1 Carbon", "printer_variant": "0.6", - "z_hop": [ - "0.4" + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C" ], "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", "max_layer_height": [ @@ -29,7 +29,8 @@ "upward_compatible_machine": [ "Bambu Lab P1S 0.6 nozzle", "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle" + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ], "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json index ac6d31e35c7..71730007b00 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json @@ -10,9 +10,6 @@ ], "printer_model": "Bambu Lab X1 Carbon", "printer_variant": "0.8", - "z_hop": [ - "0.4" - ], "default_filament_profile": [ "Bambu PLA Basic @BBL X1C 0.8 nozzle" ], @@ -32,7 +29,8 @@ "upward_compatible_machine": [ "Bambu Lab P1S 0.8 nozzle", "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle" + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ], "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" } \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json new file mode 100644 index 00000000000..2ab1813a3a4 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json @@ -0,0 +1,34 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.2 nozzle", + "inherits": "Bambu Lab X1E 0.4 nozzle", + "from": "system", + "setting_id": "GM025", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab X1E", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "nozzle_type": "stainless_steel", + "retraction_length": [ + "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle" + ], + "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z200\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json new file mode 100644 index 00000000000..30a52d88249 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json @@ -0,0 +1,39 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.4 nozzle", + "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM026", + "instantiation": "true", + "nozzle_diameter": [ + "0.4" + ], + "printer_model": "Bambu Lab X1E", + "printer_variant": "0.4", + "bed_exclude_area": [ + "0x0", + "18x0", + "18x28", + "0x28" + ], + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C" + ], + "default_print_profile": "0.20mm Standard @BBL X1C", + "extruder_offset": [ + "0x2" + ], + "machine_load_filament_time": "29", + "machine_unload_filament_time": "28", + "scan_first_layer": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "upward_compatible_machine": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle" + ], + "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z200\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y15 Z0.2 E0.741\n G0 F1200.0 X226 Y15 Z0.2 E0.275\n G0 F1200.0 X226 Y8 Z0.2 E0.384\n G0 F1200.0 X216 Y8 Z0.2 E0.549\n G0 F1200.0 X216 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E0.92 F1200.0\n G0 X35.0 Y6.0 E1.03 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n\n", + "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM141 S0 ; turn off chamber \nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X128 Y250 F3600\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json new file mode 100644 index 00000000000..1f0bf643f66 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json @@ -0,0 +1,36 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.6 nozzle", + "inherits": "Bambu Lab X1E 0.4 nozzle", + "from": "system", + "setting_id": "GM027", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab X1E", + "printer_variant": "0.6", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C" + ], + "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4" + ], + "retraction_minimum_travel": [ + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle" + ], + "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z200\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.333\n G0 F1200.0 X226 Y15 Z0.2 E0.495\n G0 F1200.0 X226 Y8 Z0.2 E0.691\n G0 F1200.0 X216 Y8 Z0.2 E0.988\n G0 F1200.0 X216 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.56 F1200.0\n G0 X35.0 Y6.0 E1.75 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json new file mode 100644 index 00000000000..9d18166836d --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json @@ -0,0 +1,36 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.8 nozzle", + "inherits": "Bambu Lab X1E 0.4 nozzle", + "from": "system", + "setting_id": "GM028", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab X1E", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.8 nozzle" + ], + "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3" + ], + "retraction_length": [ + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ], + "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z200\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y15 Z0.2 E1.482\n G0 F1200.0 X226 Y15 Z0.2 E0.550\n G0 F1200.0 X226 Y8 Z0.2 E0.768\n G0 F1200.0 X216 Y8 Z0.2 E1.098\n G0 F1200.0 X216 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y14 E1.70 F1200.0\n G0 X35.0 Y6.0 E1.90 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G0 F6000 X228.500 Y4.500 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y11.0\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X221.00 Y4.50\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E.json b/resources/profiles/BBL/machine/Bambu Lab X1E.json new file mode 100644 index 00000000000..0c7396a5c11 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Bambu Lab X1E", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "bed_model": "bbl-3dp-X1.stl", + "bed_texture": "bbl-3dp-logo.svg", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "C13", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1 Carbon.json", + "default_materials": "Bambu ABS @BBL X1E;Bambu PC @BBL X1E;Generic PLA Silk @BBL X1C;Generic PLA @BBL X1C;Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu Support W @BBL X1C;Bambu TPU 95A @BBL X1C;PolyLite PLA @BBL X1C;PolyTerra PLA @BBL X1C" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json index f2af60320d0..7a9b9bf315a 100644 --- a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json index 1742e8dc4e9..f591722386c 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json index 9c87571fef6..d584de99c76 100644 --- a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json index d699cb76cfc..5fff3ebd879 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json index ecfd6a45ecb..16c75d85ce2 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json index 63e4db5ee9d..d36cce20269 100644 --- a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json index cc737b50b43..d486de8697e 100644 --- a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json index 6f98d9b8cbf..2465e38c1d5 100644 --- a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json index c2ffcfa7df3..ad403a0007a 100644 --- a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json index dbe5144430c..0a01e92daa1 100644 --- a/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json @@ -17,6 +17,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json index 8ac7f03d8c2..1d05bdfa6f3 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json index 06af7e79e0a..27b9c03128a 100644 --- a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json @@ -11,6 +11,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json index 204262d78f8..4ef6dae40e5 100644 --- a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json index c162ab88e81..7870260cabc 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json index fa77ea78fd1..3a50374efaa 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json index eb00aab2a67..211a43a31e3 100644 --- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle" + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json index 3ce90daed10..31e55d13fdf 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json @@ -7,6 +7,7 @@ "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json index e61d98d21cd..b1a7451a468 100644 --- a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json @@ -10,6 +10,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json index 9bc34fc8cd0..e6cd89b08b1 100644 --- a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json index 4cded0e547c..9afac00ad18 100644 --- a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json index ac53792b5f6..b6d0c079174 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json @@ -7,6 +7,7 @@ "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json index f46d7d641a3..a6951dd6bb4 100644 --- a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.6 nozzle", "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json index a0cf1b83696..0b259149d0e 100644 --- a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle" + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json index 45b1ef9d3ce..c5c002865de 100644 --- a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json @@ -8,6 +8,7 @@ "compatible_printers": [ "Bambu Lab X1 Carbon 0.8 nozzle", "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/web/homepage/js/home.js b/resources/web/homepage/js/home.js index fa67c7fcbbb..ec36e552843 100644 --- a/resources/web/homepage/js/home.js +++ b/resources/web/homepage/js/home.js @@ -1,5 +1,6 @@ /*var TestData={"sequence_id":"0","command":"studio_send_recentfile","data":[{"path":"D:\\work\\Models\\Toy\\3d-puzzle-cube-model_files\\3d-puzzle-cube.3mf","time":"2022\/3\/24 20:33:10"},{"path":"D:\\work\\Models\\Art\\Carved Stone Vase - remeshed+drainage\\Carved Stone Vase.3mf","time":"2022\/3\/24 17:11:51"},{"path":"D:\\work\\Models\\Art\\Kity & Cat\\Cat.3mf","time":"2022\/3\/24 17:07:55"},{"path":"D:\\work\\Models\\Toy\\鐩村墤.3mf","time":"2022\/3\/24 17:06:02"},{"path":"D:\\work\\Models\\Toy\\minimalistic-dual-tone-whistle-model_files\\minimalistic-dual-tone-whistle.3mf","time":"2022\/3\/22 21:12:22"},{"path":"D:\\work\\Models\\Toy\\spiral-city-model_files\\spiral-city.3mf","time":"2022\/3\/22 18:58:37"},{"path":"D:\\work\\Models\\Toy\\impossible-dovetail-puzzle-box-model_files\\impossible-dovetail-puzzle-box.3mf","time":"2022\/3\/22 20:08:40"}]};*/ +var m_HotModelList=null; function OnInit() { @@ -22,7 +23,7 @@ var RightBtnFilePath=''; var MousePosX=0; var MousePosY=0; var sImages = {}; - + function Set_RecentFile_MouseRightBtn_Event() { $(".FileItem").mousedown( @@ -123,7 +124,17 @@ function HandleStudio( pVal ) else if( strCmd=="modelmall_model_advise_get") { //alert('hot'); - ShowStaffPick( pVal['hits'] ); + if( m_HotModelList!=null ) + { + let SS1=JSON.stringify(pVal['hits']); + let SS2=JSON.stringify(m_HotModelList); + + if( SS1==SS2 ) + return; + } + + m_HotModelList=pVal['hits']; + ShowStaffPick( m_HotModelList ); } } @@ -477,10 +488,10 @@ function ShowStaffPick( ModelList ) let ModelID=OnePickModel['design']['id']; let ModelName=OnePickModel['design']['title']; - let ModelCover=OnePickModel['design']['cover']; + let ModelCover=OnePickModel['design']['cover']+'?image_process=resize,w_200/format,webp'; let DesignerName=OnePickModel['design']['designCreator']['name']; - let DesignerAvatar=OnePickModel['design']['designCreator']['avatar']; + let DesignerAvatar=OnePickModel['design']['designCreator']['avatar']+'?image_process=resize,w_32/format,webp'; strPickHtml+='
'+ '
'+DesignerName+'
'+ diff --git a/resources/web/model/index.html b/resources/web/model/index.html index 37933f60b20..717c18bbae9 100644 --- a/resources/web/model/index.html +++ b/resources/web/model/index.html @@ -50,7 +50,7 @@
-
Model name:xxxxxxxxxx
+
Model name
:
xxxxxxxxxx
Model Author:xxxxxxx
diff --git a/resources/web/model/model.css b/resources/web/model/model.css index a3359931f36..069af8296fd 100644 --- a/resources/web/model/model.css +++ b/resources/web/model/model.css @@ -81,7 +81,7 @@ body { font-size: 16px; font-weight: 700; - color: black; + color: black; } .Text_Value @@ -103,9 +103,31 @@ body .Text_TitleArea div { height: 32px; - line-height: 32px + line-height: 32px; +} + +#Model_Name_Line +{ + width: 800px; +} + +#ModelNameBar +{ + width: 100%; + display: flex; + overflow:hidden; + white-space: nowrap; + text-overflow: ellipsis; +} + +#ModelName +{ + overflow:hidden; + white-space: nowrap; + text-overflow: ellipsis; } + .Block_BKGA { background-color: white; diff --git a/resources/web/model/model.js b/resources/web/model/model.js index 75e7602d3e0..73958122a4d 100644 --- a/resources/web/model/model.js +++ b/resources/web/model/model.js @@ -209,6 +209,7 @@ function ShowModelInfo( pModel ) SendWXDebugInfo("Model Name: "+sModelName); $('#ModelName').html(sModelName); + $('#ModelName').attr('title',sModelName); $('#ModelAuthorName').html(sModelAuthor); switch(UploadType) diff --git a/resources/web/model/test.js b/resources/web/model/test.js index 35668714018..46a83940731 100644 --- a/resources/web/model/test.js +++ b/resources/web/model/test.js @@ -1,6 +1,6 @@ var TestProjectData={ "model": { - "name": "xxxxxxxxxxxxxxxxxxxxxxxxx easy print", + "name": "xxxxxxxxxxxxxxxxxxxxxxxxx easy printeasy printeasy printeasy printeasy printeasy printeasy printeasy printeasy printeasy printeasy printeasy printeasy printeasy printeasy printeasy printeasy printeasy printeasy print", "author": "Zorro Zhang", "upload_type": "share", "license": "CC0", diff --git a/src/OrcaSlicer.cpp b/src/OrcaSlicer.cpp index 6dfcc686de9..3ab0342d2c6 100644 --- a/src/OrcaSlicer.cpp +++ b/src/OrcaSlicer.cpp @@ -2063,7 +2063,7 @@ int CLI::run(int argc, char **argv) cli_status_callback(slicing_status); } #endif - print->process(true); + print->process(); BOOST_LOG_TRIVIAL(info) << "plate "<< index+1<< ": finished print::process."; } } diff --git a/src/libnest2d/include/libnest2d/nester.hpp b/src/libnest2d/include/libnest2d/nester.hpp index 2ac0392d71a..13281c389b9 100644 --- a/src/libnest2d/include/libnest2d/nester.hpp +++ b/src/libnest2d/include/libnest2d/nester.hpp @@ -69,13 +69,14 @@ class _Item { Box bb; bool valid; BBCache(): valid(false) {} } bb_cache_; - + int binid_{BIN_ID_UNSET}, priority_{0}; bool fixed_{false}; public: int itemid_{ 0 }; std::vector extrude_ids; + int filament_temp_type = -1; // -1 means unset. otherwise should be {0,1,2} double height{ 0 }; double print_temp{ 0 }; double bed_temp{ 0 }; @@ -84,6 +85,7 @@ class _Item { //BBS: virtual object to mark unprintable region on heatbed bool is_virt_object{ false }; bool is_wipe_tower{ false }; + bool has_tried_with_excluded{ false }; /// The type of the shape which was handed over as the template argument. using ShapeType = RawShape; @@ -139,7 +141,7 @@ class _Item { inline _Item(TContour&& contour, THolesContainer&& holes): sh_(sl::create(std::move(contour), std::move(holes))) {} - + inline bool isFixed() const noexcept { return fixed_; } inline void markAsFixedInBin(int binid) { @@ -149,7 +151,7 @@ class _Item { inline void binId(int idx) { binid_ = idx; } inline int binId() const noexcept { return binid_; } - + inline void priority(int p) { priority_ = p; } inline int priority() const noexcept { return priority_; } @@ -302,18 +304,18 @@ class _Item { { rotation(rotation() + rads); } - + inline void inflation(Coord distance) BP2D_NOEXCEPT { inflation_ = distance; has_inflation_ = true; invalidateCache(); } - + inline Coord inflation() const BP2D_NOEXCEPT { return inflation_; } - + inline void inflate(Coord distance) BP2D_NOEXCEPT { inflation(inflation() + distance); @@ -662,9 +664,21 @@ class PlacementStrategyLike { /// Get the packed items. inline ItemGroup getItems() { return impl_.getItems(); } + inline int getPackedSize() + { + int size = 0; + auto items = getItems(); + for (const auto &itm : items) { + if (itm.get().isFixed() == false) { size++; } + } + return size; + } + /// Clear the packed items so a new session can be started. inline void clearItems() { impl_.clearItems(); } + inline void clearItems(const std::function &func) { impl_.clearItems(func); } + inline double filledArea() const { return impl_.filledArea(); } inline double score() const { return impl_.score(); } @@ -767,7 +781,7 @@ template class _Nester { using TSel = SelectionStrategyLike; TSel selector_; - + public: using Item = typename PlacementStrategy::Item; using ShapeType = typename Item::ShapeType; @@ -792,7 +806,7 @@ class _Nester { StopCondition stopfn_; template using TVal = remove_ref_t; - + template using ItemIteratorOnly = enable_if_t&, TPItem&>::value, Out>; @@ -850,14 +864,14 @@ class _Nester { if(infl > 0) std::for_each(from, to, [infl](Item& item) { item.inflate(infl); }); - + selector_.template packItems( from, to, bin_, pconfig_); - + if(min_obj_distance_ > 0) std::for_each(from, to, [infl](Item& item) { item.inflate(-infl); }); - + return selector_.getResult().size(); } diff --git a/src/libnest2d/include/libnest2d/placers/nfpplacer.hpp b/src/libnest2d/include/libnest2d/placers/nfpplacer.hpp index d4036c1096f..65a3344b046 100644 --- a/src/libnest2d/include/libnest2d/placers/nfpplacer.hpp +++ b/src/libnest2d/include/libnest2d/placers/nfpplacer.hpp @@ -558,6 +558,13 @@ class _NofitPolyPlacer: public PlacerBoilerplate<_NofitPolyPlacer &clearFunc) + { + finalAlign(bin_); + Base::clearItems(clearFunc); + } + void preload(const ItemGroup& packeditems) { Base::preload(packeditems); if (config_.on_preload) diff --git a/src/libnest2d/include/libnest2d/placers/placer_boilerplate.hpp b/src/libnest2d/include/libnest2d/placers/placer_boilerplate.hpp index 4b2af5f7b64..ae2d9712d68 100644 --- a/src/libnest2d/include/libnest2d/placers/placer_boilerplate.hpp +++ b/src/libnest2d/include/libnest2d/placers/placer_boilerplate.hpp @@ -96,6 +96,17 @@ class PlacerBoilerplate { farea_valid_ = false; } + //clearFunc: will be cleared if return true + inline void clearItems(const std::function &clearFunc) + { + ItemGroup newGroup; + for (auto &i : items_) { + if (clearFunc(i.get()) == false) { newGroup.push_back(i); } + } + std::swap(newGroup, items_); + farea_valid_ = false; + } + inline double filledArea() const { if(farea_valid_) return farea_; else { diff --git a/src/libnest2d/include/libnest2d/selections/firstfit.hpp b/src/libnest2d/include/libnest2d/selections/firstfit.hpp index e739a887013..bb7f4b45c01 100644 --- a/src/libnest2d/include/libnest2d/selections/firstfit.hpp +++ b/src/libnest2d/include/libnest2d/selections/firstfit.hpp @@ -161,6 +161,25 @@ class _FirstFitSelection: public SelectionBoilerplate { makeProgress(placers[j], j); } + if (was_packed && it->get().has_tried_with_excluded) { + placers[j].clearItems([](const Item &itm) { return itm.isFixed() && !itm.is_wipe_tower; }); + if (fixed_bins.size() >= placers.size()) + placers[j].preload(fixed_bins[placers.size() - 1]); + } + bool placer_not_packed = !was_packed && !placers.empty() && j == placers.size() && placers[j - 1].getPackedSize() == 0; // large item is not placed into the bin + if (placer_not_packed) { + if (it->get().has_tried_with_excluded == false) { + it->get().has_tried_with_excluded = true; + placers[j - 1].clearItems([](const Item &itm) { return itm.isFixed()&&!itm.is_wipe_tower; }); + placers[j - 1].preload(pconfig.m_excluded_items); + j = j - 1; + continue; + } else { + placers[j - 1].clearItems([](const Item &itm) { return itm.isFixed() && !itm.is_wipe_tower; }); + placers[j - 1].preload(fixed_bins[placers.size() - 1]); + } + } + if(!was_packed){ if (this->unfitindicator_ && !placers.empty()) this->unfitindicator_(it->get().name + ", height=" +std::to_string(it->get().height) diff --git a/src/libnest2d/include/libnest2d/selections/selection_boilerplate.hpp b/src/libnest2d/include/libnest2d/selections/selection_boilerplate.hpp index ffb878e4112..a9871dcb1a6 100644 --- a/src/libnest2d/include/libnest2d/selections/selection_boilerplate.hpp +++ b/src/libnest2d/include/libnest2d/selections/selection_boilerplate.hpp @@ -37,7 +37,7 @@ class SelectionBoilerplate { // then it should be removed from the list Placer p{ bin }; p.configure(pcfg); - //p.preload(pcfg.m_excluded_items); + p.preload(pcfg.m_excluded_items); auto it = c.begin(); while (it != c.end() && !stopcond_()) { diff --git a/src/libslic3r/Arrange.cpp b/src/libslic3r/Arrange.cpp index 3ea4955fe89..612a2b864bd 100644 --- a/src/libslic3r/Arrange.cpp +++ b/src/libslic3r/Arrange.cpp @@ -1,5 +1,5 @@ #include "Arrange.hpp" - +#include "Print.hpp" #include "BoundingBox.hpp" #include @@ -80,19 +80,18 @@ using ItemGroup = std::vector>; const double BIG_ITEM_TRESHOLD = 0.02; #define VITRIFY_TEMP_DIFF_THRSH 15 // bed temp can be higher than vitrify temp, but not higher than this thresh -void update_arrange_params(ArrangeParams& params, const DynamicPrintConfig& print_cfg, const ArrangePolygons& selected) +void update_arrange_params(ArrangeParams& params, const DynamicPrintConfig* print_cfg, const ArrangePolygons& selected) { - double skirt_distance = get_real_skirt_dist(print_cfg); + double skirt_distance = get_real_skirt_dist(*print_cfg); // Note: skirt_distance is now defined between outermost brim and skirt, not the object and skirt. // So we can't do max but do adding instead. params.brim_skirt_distance = skirt_distance; - params.bed_shrink_x = params.brim_skirt_distance; - params.bed_shrink_y = params.brim_skirt_distance; + params.bed_shrink_x += params.brim_skirt_distance; + params.bed_shrink_y += params.brim_skirt_distance; // for sequential print, we need to inflate the bed because cleareance_radius is so large if (params.is_seq_print) { - float shift_dist = params.cleareance_radius / 2 - 5; - params.bed_shrink_x -= shift_dist; - params.bed_shrink_y -= shift_dist; + params.bed_shrink_x -= params.cleareance_radius / 2; + params.bed_shrink_y -= params.cleareance_radius / 2; } } @@ -126,11 +125,13 @@ void update_selected_items_inflation(ArrangePolygons& selected, const DynamicPri void update_unselected_items_inflation(ArrangePolygons& unselected, const DynamicPrintConfig* print_cfg, const ArrangeParams& params) { + float exclusion_gap = 1.f; if (params.is_seq_print) { - float shift_dist = params.cleareance_radius / 2 - 5; + // bed_shrink_x is typically (-params.cleareance_radius / 2+5) for seq_print + exclusion_gap = std::max(exclusion_gap, params.cleareance_radius / 2 + params.bed_shrink_x + 1.f); // +1mm gap so the exclusion region is not too close // dont forget to move the excluded region for (auto& region : unselected) { - if (region.is_virt_object) region.poly.translate(-scaled(shift_dist), -scaled(shift_dist)); + if (region.is_virt_object) region.poly.translate(scaled(params.bed_shrink_x), scaled(params.bed_shrink_y)); } } // For occulusion regions, inflation should be larger to prevent genrating brim on them. @@ -138,10 +139,9 @@ void update_unselected_items_inflation(ArrangePolygons& unselected, const Dynami // 屏蔽区域只需要膨胀brim宽度，防止brim长过去；挤出标定区域不需要膨胀，brim可以长过去。 // 以前我们认为还需要膨胀clearance_radius/2，这其实是不需要的，因为这些区域并不会真的摆放物体， // 其他物体的膨胀轮廓是可以跟它们重叠的。 - double scaled_exclusion_gap = scale_(1); std::for_each(unselected.begin(), unselected.end(), [&](auto& ap) { ap.inflation = !ap.is_virt_object ? (params.min_obj_distance == 0 ? scaled(ap.brim_width) : params.min_obj_distance / 2) - : (ap.is_extrusion_cali_object ? 0 : scaled_exclusion_gap); }); + : (ap.is_extrusion_cali_object ? 0 : scale_(exclusion_gap)); }); } void update_selected_items_axis_align(ArrangePolygons& selected, const DynamicPrintConfig* print_cfg, const ArrangeParams& params) @@ -260,7 +260,7 @@ Points get_shrink_bedpts(const DynamicPrintConfig* print_cfg, const ArrangeParam // Slic3r. template void fill_config(PConf& pcfg, const ArrangeParams ¶ms) { - + if (params.is_seq_print) { // Start placing the items from the center of the print bed pcfg.starting_point = PConf::Alignment::BOTTOM_LEFT; @@ -269,7 +269,7 @@ void fill_config(PConf& pcfg, const ArrangeParams ¶ms) { // Start placing the items from the center of the print bed pcfg.starting_point = PConf::Alignment::TOP_RIGHT; } - + if (params.do_final_align) { // Align the arranged pile into the center of the bin pcfg.alignment = PConf::Alignment::CENTER; @@ -286,7 +286,7 @@ void fill_config(PConf& pcfg, const ArrangeParams ¶ms) { // The accuracy of optimization. // Goes from 0.0 to 1.0 and scales performance as well pcfg.accuracy = params.accuracy; - + // Allow parallel execution. pcfg.parallel = params.parallel; @@ -312,7 +312,7 @@ static double fixed_overfit(const std::tuple& result, const Box &bi Box fullbb = sl::boundingBox(pilebb, binbb); auto diff = double(fullbb.area()) - binbb.area(); if(diff > 0) score += diff; - + return score; } @@ -379,7 +379,7 @@ class AutoArranger { std::vector m_excluded_and_extruCali_regions; // excluded and extrusion calib regions size_t m_item_count = 0; // Number of all items to be packed ArrangeParams params; - + template ArithmeticOnly norm(T val) { return double(val) / m_norm; @@ -417,18 +417,18 @@ class AutoArranger { const double bin_area = m_bin_area; const SpatIndex& spatindex = m_rtree; const SpatIndex& smalls_spatindex = m_smallsrtree; - + // We will treat big items (compared to the print bed) differently auto isBig = [bin_area](double a) { return a/bin_area > BIG_ITEM_TRESHOLD ; }; - + // Candidate item bounding box auto ibb = item.boundingBox(); - + // Calculate the full bounding box of the pile with the candidate item auto fullbb = sl::boundingBox(m_pilebb, ibb); - + // The bounding box of the big items (they will accumulate in the center // of the pile Box bigbb; @@ -437,31 +437,31 @@ class AutoArranger { auto boostbb = spatindex.bounds(); boost::geometry::convert(boostbb, bigbb); } - + // Will hold the resulting score double score = 0; - + // Density is the pack density: how big is the arranged pile double density = 0; - + // Distinction of cases for the arrangement scene enum e_cases { // This branch is for big items in a mixed (big and small) scene // OR for all items in a small-only scene. BIG_ITEM, - + // This branch is for the last big item in a mixed scene LAST_BIG_ITEM, - + // For small items in a mixed scene. SMALL_ITEM } compute_case; - + bool bigitems = isBig(item.area()) || spatindex.empty(); if(!params.is_seq_print && bigitems && !m_remaining.empty()) compute_case = BIG_ITEM; // do not use so complicated logic for sequential printing else if (bigitems && m_remaining.empty()) compute_case = LAST_BIG_ITEM; else compute_case = SMALL_ITEM; - + switch (compute_case) { case BIG_ITEM: { const Point& minc = ibb.minCorner(); // bottom left corner @@ -566,7 +566,7 @@ class AutoArranger { } break; - } + } } @@ -603,9 +603,11 @@ class AutoArranger { for (int i = 0; i < m_items.size(); i++) { Item& p = m_items[i]; if (p.is_virt_object) continue; - score += lambda3 * (item.bed_temp - p.vitrify_temp > VITRIFY_TEMP_DIFF_THRSH); + //score += lambda3 * (item.bed_temp - p.vitrify_temp > VITRIFY_TEMP_DIFF_THRSH); + if (!Print::is_filaments_compatible({item.filament_temp_type,p.filament_temp_type})) + score += lambda3; } - score += lambda3 * (item.bed_temp - item.vitrify_temp > VITRIFY_TEMP_DIFF_THRSH); + //score += lambda3 * (item.bed_temp - item.vitrify_temp > VITRIFY_TEMP_DIFF_THRSH); score += lambda4 * hasRowHeightConflict + lambda4 * hasLidHeightConflict; } else { @@ -625,7 +627,9 @@ class AutoArranger { // 高度接近的件尽量摆到一起 score += (1- std::abs(item.height - p.height) / params.printable_height) * norm(pl::distance(ibb.center(), p.boundingBox().center())); - score += LARGE_COST_TO_REJECT * (item.bed_temp - p.bed_temp != 0); + //score += LARGE_COST_TO_REJECT * (item.bed_temp - p.bed_temp != 0); + if (!Print::is_filaments_compatible({ item.filament_temp_type,p.filament_temp_type })) + score += LARGE_COST_TO_REJECT; } } } @@ -656,9 +660,9 @@ class AutoArranger { return std::make_tuple(score, fullbb); } - + std::function get_objfn(); - + public: AutoArranger(const TBin & bin, const ArrangeParams ¶ms, @@ -708,7 +712,7 @@ class AutoArranger { m_rtree.clear(); m_smallsrtree.clear(); - + // We will treat big items (compared to the print bed) differently auto isBig = [this](double a) { return a / m_bin_area > BIG_ITEM_TRESHOLD ; @@ -721,7 +725,7 @@ class AutoArranger { m_smallsrtree.insert({itm.boundingBox(), idx}); } }; - + m_pconf.object_function = get_objfn(); // preload fixed items (and excluded regions) on plate @@ -746,7 +750,7 @@ class AutoArranger { }; auto on_packed = params.on_packed; - + if (progressind || on_packed) m_pck.progressIndicator( [this, progressind, on_packed](unsigned num_finished) { @@ -760,7 +764,8 @@ class AutoArranger { if (on_packed) on_packed(ap); BOOST_LOG_TRIVIAL(debug) << "arrange " + last_packed.name + " succeed!" - << ", plate id=" << ap.bed_idx << ", pos=" << last_packed.translation(); + << ", plate id=" << ap.bed_idx << ", pos=" << last_packed.translation() + << ", temp_type=" << last_packed.filament_temp_type; } }); @@ -783,21 +788,21 @@ class AutoArranger { (i1.extrude_ids != i2.extrude_ids ? (i1.extrude_ids.front() < i2.extrude_ids.front()) : (i1.area() > i2.area())); } }; - + m_pck.configure(m_pconf); } - + template inline void operator()(It from, It to) { m_rtree.clear(); m_item_count += size_t(to - from); m_pck.execute(from, to); m_item_count = 0; } - + PConfig& config() { return m_pconf; } const PConfig& config() const { return m_pconf; } - - inline void preload(std::vector& fixeditems) { + + inline void preload(std::vector& fixeditems) { for(unsigned idx = 0; idx < fixeditems.size(); ++idx) { Item& itm = fixeditems[idx]; itm.markAsFixedInBin(itm.binId()); @@ -813,7 +818,7 @@ template<> std::function AutoArranger(result); auto& fullbb = std::get<1>(result); @@ -840,15 +845,15 @@ template<> std::function AutoArranger(result); - + auto isBig = [this](const Item& itm) { return itm.area() / m_bin_area > BIG_ITEM_TRESHOLD ; }; - + if(isBig(item)) { auto mp = m_merged_pile; mp.push_back(item.transformedShape()); @@ -857,7 +862,7 @@ template<> std::function AutoArranger AutoArranger::g auto result = objfunc(itm, origin_pack); double score = std::get<0>(result); - + auto mp = m_merged_pile; mp.emplace_back(itm.transformedShape()); auto chull = sl::convexHull(mp); @@ -930,14 +935,14 @@ void _arrange( // Integer ceiling the min distance from the bed perimeters coord_t md = params.min_obj_distance; md = md / 2; - + auto corrected_bin = bin; //sl::offset(corrected_bin, md); ArrangeParams mod_params = params; mod_params.min_obj_distance = 0; // items are already inflated AutoArranger arranger{corrected_bin, mod_params, progressfn, stopfn}; - + remove_large_items(excludes, corrected_bin); // If there is something on the plate @@ -947,7 +952,7 @@ void _arrange( inp.reserve(shapes.size() + excludes.size()); for (auto &itm : shapes ) inp.emplace_back(itm); for (auto &itm : excludes) inp.emplace_back(itm); - + // Use the minimum bounding box rotation as a starting point. // TODO: This only works for convex hull. If we ever switch to concave // polygon nesting, a convex hull needs to be calculated. @@ -987,16 +992,16 @@ inline double distance_to(const Point& p1, const Point& p2) static CircleBed to_circle(const Point ¢er, const Points& points) { std::vector vertex_distances; double avg_dist = 0; - + for (auto pt : points) { double distance = distance_to(center, pt); vertex_distances.push_back(distance); avg_dist += distance; } - + avg_dist /= vertex_distances.size(); - + CircleBed ret(center, avg_dist); for(auto el : vertex_distances) { @@ -1005,7 +1010,7 @@ static CircleBed to_circle(const Point ¢er, const Points& points) { break; } } - + return ret; } @@ -1039,6 +1044,7 @@ static void process_arrangeable(const ArrangePolygon &arrpoly, item.print_temp = arrpoly.print_temp; item.vitrify_temp = arrpoly.vitrify_temp; item.inflation(arrpoly.inflation); + item.filament_temp_type = arrpoly.filament_temp_type; } template auto call_with_bed(const Points &bed, Fn &&fn) @@ -1079,20 +1085,20 @@ void arrange(ArrangePolygons & arrangables, const ArrangeParams & params) { namespace clppr = Slic3r::ClipperLib; - + std::vector items, fixeditems; items.reserve(arrangables.size()); - + for (ArrangePolygon &arrangeable : arrangables) process_arrangeable(arrangeable, items); - + for (const ArrangePolygon &fixed: excludes) process_arrangeable(fixed, fixeditems); - + for (Item &itm : fixeditems) itm.inflate(scaled(-2. * EPSILON)); - + _arrange(items, fixeditems, to_nestbin(bed), params, params.progressind, params.stopcondition); - + for(size_t i = 0; i < items.size(); ++i) { Point tr = items[i].translation(); arrangables[i].translation = {coord_t(tr.x()), coord_t(tr.y())}; diff --git a/src/libslic3r/Arrange.hpp b/src/libslic3r/Arrange.hpp index 352ca846e69..bf9815be6bc 100644 --- a/src/libslic3r/Arrange.hpp +++ b/src/libslic3r/Arrange.hpp @@ -3,6 +3,9 @@ #include "ExPolygon.hpp" #include "PrintConfig.hpp" + +#define BED_SHRINK_SEQ_PRINT 5 + namespace Slic3r { class BoundingBox; @@ -37,12 +40,12 @@ static const constexpr int UNARRANGED = -1; /// be modified during arrangement. Instead, the translation and rotation fields /// will mark the needed transformation for the polygon to be in the arranged /// position. These can also be set to an initial offset and rotation. -/// +/// /// The bed_idx field will indicate the logical bed into which the /// polygon belongs: UNARRANGED means no place for the polygon /// (also the initial state before arrange), 0..N means the index of the bed. /// Zero is the physical bed, larger than zero means a virtual bed. -struct ArrangePolygon { +struct ArrangePolygon { ExPolygon poly; /// The 2D silhouette to be arranged Vec2crd translation{0, 0}; /// The translation of the poly double rotation{0.0}; /// The rotation of the poly in radians @@ -59,6 +62,7 @@ struct ArrangePolygon { int row{0}; int col{0}; std::vector extrude_ids{}; /// extruder_id for least extruder switch + int filament_temp_type{ -1 }; int bed_temp{0}; ///bed temperature for different material judge int print_temp{0}; ///print temperature for different material judge int first_bed_temp{ 0 }; ///first layer bed temperature for different material judge @@ -66,20 +70,20 @@ struct ArrangePolygon { int vitrify_temp{ 0 }; // max bed temperature for material compatibility, which is usually the filament vitrification temp int itemid{ 0 }; // item id in the vector, used for accessing all possible params like extrude_id int is_applied{ 0 }; // transform has been applied - double height{ 0 }; // item height + double height{ 0 }; // item height double brim_width{ 0 }; // brim width std::string name; - + // If empty, any rotation is allowed (currently unsupported) // If only a zero is there, no rotation is allowed std::vector allowed_rotations = {0.}; - + /// Optional setter function which can store arbitrary data in its closure std::function setter = nullptr; - + /// Helper function to call the setter with the arrange data arguments void apply() { - if (setter && !is_applied) { + if (setter && !is_applied) { setter(*this); is_applied = 1; } @@ -101,15 +105,15 @@ struct ArrangePolygon { using ArrangePolygons = std::vector; struct ArrangeParams { - - /// The minimum distance which is allowed for any + + /// The minimum distance which is allowed for any /// pair of items on the print bed in any direction. coord_t min_obj_distance = 0; - + /// The accuracy of optimization. /// Goes from 0.0 to 1.0 and scales performance as well float accuracy = 1.f; - + /// Allow parallel execution. bool parallel = true; @@ -122,8 +126,8 @@ struct ArrangeParams { bool avoid_extrusion_cali_region = true; bool is_seq_print = false; bool align_to_y_axis = false; - float bed_shrink_x = 0; - float bed_shrink_y = 0; + float bed_shrink_x = 1; + float bed_shrink_y = 1; float brim_skirt_distance = 0; float clearance_height_to_rod = 0; float clearance_height_to_lid = 0; @@ -133,18 +137,18 @@ struct ArrangeParams { ArrangePolygons excluded_regions; // regions cant't be used ArrangePolygons nonprefered_regions; // regions can be used but not prefered - - /// Progress indicator callback called when an object gets packed. + + /// Progress indicator callback called when an object gets packed. /// The unsigned argument is the number of items remaining to pack. std::function progressind = [](unsigned st, std::string str = "") { std::cout << "st=" << st << ", " << str << std::endl; }; std::function on_packed; - + /// A predicate returning true if abort is needed. std::function stopcondition; - + ArrangeParams() = default; explicit ArrangeParams(coord_t md) : min_obj_distance(md) {} // to json format @@ -170,7 +174,7 @@ struct ArrangeParams { }; -void update_arrange_params(ArrangeParams& params, const DynamicPrintConfig& print_cfg, const ArrangePolygons& selected); +void update_arrange_params(ArrangeParams& params, const DynamicPrintConfig* print_cfg, const ArrangePolygons& selected); void update_selected_items_inflation(ArrangePolygons& selected, const DynamicPrintConfig* print_cfg, ArrangeParams& params); @@ -183,11 +187,11 @@ Points get_shrink_bedpts(const DynamicPrintConfig* print_cfg, const ArrangeParam /** * \brief Arranges the input polygons. * - * WARNING: Currently, only convex polygons are supported by the libnest2d + * WARNING: Currently, only convex polygons are supported by the libnest2d * library which is used to do the arrangement. This might change in the future * this is why the interface contains a general polygon capable to have holes. * - * \param items Input vector of ArrangePolygons. The transformation, rotation + * \param items Input vector of ArrangePolygons. The transformation, rotation * and bin_idx fields will be changed after the call finished and can be used * to apply the result on the input polygon. */ diff --git a/src/libslic3r/Config.cpp b/src/libslic3r/Config.cpp index 439eb9779c2..03e7000c85e 100644 --- a/src/libslic3r/Config.cpp +++ b/src/libslic3r/Config.cpp @@ -783,6 +783,9 @@ int ConfigBase::load_from_json(const std::string &file, ConfigSubstitutionContex std::list different_settings_append; std::string new_support_style; bool is_project_settings = false; + + CNumericLocalesSetter locales_setter; + try { boost::nowide::ifstream ifs(file); ifs >> j; diff --git a/src/libslic3r/Format/bbs_3mf.cpp b/src/libslic3r/Format/bbs_3mf.cpp index 8709e7793f7..6be38e14a14 100644 --- a/src/libslic3r/Format/bbs_3mf.cpp +++ b/src/libslic3r/Format/bbs_3mf.cpp @@ -5894,8 +5894,11 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result) /* step width and step height */ int sw = thumbnail_data.width / PLATE_THUMBNAIL_SMALL_WIDTH; int sh = thumbnail_data.height / PLATE_THUMBNAIL_SMALL_HEIGHT; - for (int i = 0; i < thumbnail_data.height; i += sh) { - for (int j = 0; j < thumbnail_data.width; j += sw) { + int clampped_width = sw * PLATE_THUMBNAIL_SMALL_WIDTH; + int clampped_height = sh * PLATE_THUMBNAIL_SMALL_HEIGHT; + + for (int i = 0; i < clampped_height; i += sh) { + for (int j = 0; j < clampped_width; j += sw) { int r = 0, g = 0, b = 0, a = 0; for (int m = 0; m < sh; m++) { for (int n = 0; n < sw; n++) { diff --git a/src/libslic3r/GCode/GCodeProcessor.cpp b/src/libslic3r/GCode/GCodeProcessor.cpp index a6f8b7d8ecb..3299d9e6dc7 100644 --- a/src/libslic3r/GCode/GCodeProcessor.cpp +++ b/src/libslic3r/GCode/GCodeProcessor.cpp @@ -83,12 +83,6 @@ const std::vector GCodeProcessor::Reserved_Tags_compatible = { const std::string GCodeProcessor::Flush_Start_Tag = " FLUSH_START"; const std::string GCodeProcessor::Flush_End_Tag = " FLUSH_END"; -const std::map GCodeProcessor::Nozzle_Type_To_HRC={ - {NozzleType::ntStainlessSteel,20}, - {NozzleType::ntHardenedSteel,55}, - {NozzleType::ntBrass,2}, - {NozzleType::ntUndefine,0} -}; const float GCodeProcessor::Wipe_Width = 0.05f; const float GCodeProcessor::Wipe_Height = 0.05f; @@ -4350,7 +4344,7 @@ void GCodeProcessor::update_slice_warnings() if (m_highest_bed_temp != 0) { for (size_t i = 0; i < used_extruders.size(); i++) { int temperature = get_filament_vitrification_temperature(used_extruders[i]); - if (temperature != 0 && m_highest_bed_temp > temperature) + if (temperature != 0 && m_highest_bed_temp >= temperature) warning.params.push_back(std::to_string(used_extruders[i])); } } @@ -4367,7 +4361,7 @@ void GCodeProcessor::update_slice_warnings() int nozzle_hrc = m_result.nozzle_hrc; if(nozzle_hrc <= 0) - nozzle_hrc = Nozzle_Type_To_HRC.find(m_result.nozzle_type)->second; + nozzle_hrc = Print::get_hrc_by_nozzle_type(m_result.nozzle_type); if (nozzle_hrc!=0) { for (size_t i = 0; i < used_extruders.size(); i++) { int HRC=0; diff --git a/src/libslic3r/GCode/GCodeProcessor.hpp b/src/libslic3r/GCode/GCodeProcessor.hpp index 84240714ac1..209a1cc686f 100644 --- a/src/libslic3r/GCode/GCodeProcessor.hpp +++ b/src/libslic3r/GCode/GCodeProcessor.hpp @@ -244,7 +244,6 @@ namespace Slic3r { static const std::vector Reserved_Tags_compatible; static const std::string Flush_Start_Tag; static const std::string Flush_End_Tag; - static const std::mapNozzle_Type_To_HRC; public: enum class ETags : unsigned char { diff --git a/src/libslic3r/ModelArrange.cpp b/src/libslic3r/ModelArrange.cpp index 710b031feff..50622a3b54c 100644 --- a/src/libslic3r/ModelArrange.cpp +++ b/src/libslic3r/ModelArrange.cpp @@ -2,6 +2,7 @@ #include #include +#include #include "MTUtils.hpp" namespace Slic3r { @@ -10,7 +11,7 @@ arrangement::ArrangePolygons get_arrange_polys(const Model &model, ModelInstance { size_t count = 0; for (auto obj : model.objects) count += obj->instances.size(); - + ArrangePolygons input; input.reserve(count); instances.clear(); instances.reserve(count); @@ -21,21 +22,21 @@ arrangement::ArrangePolygons get_arrange_polys(const Model &model, ModelInstance input.emplace_back(ap); instances.emplace_back(minst); } - + return input; } bool apply_arrange_polys(ArrangePolygons &input, ModelInstancePtrs &instances, VirtualBedFn vfn) { bool ret = true; - + for(size_t i = 0; i < input.size(); ++i) { if (input[i].bed_idx != 0) { ret = false; if (vfn) vfn(input[i]); } if (input[i].bed_idx >= 0) instances[i]->apply_arrange_result(input[i].translation.cast(), input[i].rotation); } - + return ret; } @@ -52,7 +53,7 @@ Slic3r::arrangement::ArrangePolygon get_arrange_poly(const Model &model) const Points &pts = obj_ap.poly.contour.points; std::copy(pts.begin(), pts.end(), std::back_inserter(apts)); } - + apts = std::move(Geometry::convex_hull(apts).points); return ap; } @@ -118,7 +119,7 @@ arrangement::ArrangePolygon get_arrange_poly(ModelInstance* inst, const Slic3r:: ArrangePolygon get_instance_arrange_poly(ModelInstance* instance, const Slic3r::DynamicPrintConfig& config) { ArrangePolygon ap = get_arrange_poly(PtrWrapper{ instance }, config); - + //BBS: add temperature information if (config.has("curr_bed_type")) { ap.bed_temp = 0; @@ -138,11 +139,23 @@ ArrangePolygon get_instance_arrange_poly(ModelInstance* instance, const Slic3r:: ap.print_temp = config.opt_int("nozzle_temperature", ap.extrude_ids.front() - 1); if (config.has("nozzle_temperature_initial_layer")) //get the nozzle_temperature_initial_layer ap.first_print_temp = config.opt_int("nozzle_temperature_initial_layer", ap.extrude_ids.front() - 1); - + if (config.has("temperature_vitrification")) { ap.vitrify_temp = config.opt_int("temperature_vitrification", ap.extrude_ids.front() - 1); } + // get filament temp types + auto* filament_types_opt = dynamic_cast(config.option("filament_type")); + if (filament_types_opt) { + std::set filament_temp_types; + for (auto i : ap.extrude_ids) { + std::string type_str = filament_types_opt->get_at(i-1); + int temp_type = Print::get_filament_temp_type(type_str); + filament_temp_types.insert(temp_type); + } + ap.filament_temp_type = Print::get_compatible_filament_type(filament_temp_types); + } + // get brim width auto obj = instance->get_object(); @@ -162,7 +175,7 @@ ArrangePolygon get_instance_arrange_poly(ModelInstance* instance, const Slic3r:: ap.brim_width = 24.0; // 2*MAX_BRANCH_RADIUS_FIRST_LAYER ap.has_tree_support = true; } - + ap.height = obj->bounding_box().size().z(); ap.name = obj->name; return ap; diff --git a/src/libslic3r/PresetBundle.cpp b/src/libslic3r/PresetBundle.cpp index 8a5ead8dcf5..a54b6d14c40 100644 --- a/src/libslic3r/PresetBundle.cpp +++ b/src/libslic3r/PresetBundle.cpp @@ -2828,7 +2828,6 @@ void PresetBundle::load_config_file_config(const std::string &name_or_path, bool std::pair PresetBundle::load_vendor_configs_from_json( const std::string &path, const std::string &vendor_name, LoadConfigBundleAttributes flags, ForwardCompatibilitySubstitutionRule compatibility_rule) { - CNumericLocalesSetter locales_setter; // Enable substitutions for user config bundle, throw an exception when loading a system profile. ConfigSubstitutionContext substitution_context { compatibility_rule }; PresetsConfigSubstitutions substitutions; diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp index 26bd7f3ed5d..a88fc726fc4 100644 --- a/src/libslic3r/Print.cpp +++ b/src/libslic3r/Print.cpp @@ -32,6 +32,7 @@ #include "ShortestPath.hpp" #include "SupportMaterial.hpp" #include "Thread.hpp" +#include "Time.hpp" #include "GCode.hpp" #include "GCode/WipeTower.hpp" #include "GCode/WipeTower2.hpp" @@ -589,7 +590,7 @@ StringObjectException Print::sequential_print_clearance_valid(const Print &print auto tmp = offset(convex_hull_no_offset, // Shrink the extruder_clearance_radius a tiny bit, so that if the object arrangement algorithm placed the objects // exactly by satisfying the extruder_clearance_radius, this test will not trigger collision. - float(scale_(0.5 * print.config().extruder_clearance_radius.value - EPSILON)), + float(scale_(0.5 * print.config().extruder_clearance_radius.value - 0.1)), jtRound, scale_(0.1)); if (!tmp.empty()) { // tmp may be empty due to clipper's bug, see STUDIO-2452 convex_hull = tmp.front(); @@ -954,36 +955,59 @@ static StringObjectException layered_print_cleareance_valid(const Print &print, bool Print::check_multi_filaments_compatibility(const std::vector& filament_types) { - static std::map filament_is_high_temp{ - {"PLA", false}, - {"PLA-CF", false}, - //{"PETG", true}, - {"ABS", true}, - {"TPU", false}, - {"PA", true}, - {"PA-CF", true}, - {"PET-CF", true}, - {"PC", true}, - {"ASA", true}, - {"HIPS", true} - }; + bool has_high_temperature_filament = false; + bool has_low_temperature_filament = false; + + for (const auto& type : filament_types) { + if (get_filament_temp_type(type) ==FilamentTempType::HighTemp) + has_high_temperature_filament = true; + else if (get_filament_temp_type(type) == FilamentTempType::LowTemp) + has_low_temperature_filament = true; + } + + if (has_high_temperature_filament && has_low_temperature_filament) + return false; + return true; +} + +bool Print::is_filaments_compatible(const std::vector& filament_types) +{ bool has_high_temperature_filament = false; bool has_low_temperature_filament = false; - for (const auto& type : filament_types) - if (filament_is_high_temp.find(type) != filament_is_high_temp.end()) { - if (filament_is_high_temp[type]) - has_high_temperature_filament = true; - else - has_low_temperature_filament = true; - } + for (const auto& type : filament_types) { + if (type == FilamentTempType::HighTemp) + has_high_temperature_filament = true; + else if (type == FilamentTempType::LowTemp) + has_low_temperature_filament = true; + } if (has_high_temperature_filament && has_low_temperature_filament) return false; return true; } +int Print::get_compatible_filament_type(const std::set& filament_types) +{ + bool has_high_temperature_filament = false; + bool has_low_temperature_filament = false; + + for (const auto& type : filament_types) { + if (type == FilamentTempType::HighTemp) + has_high_temperature_filament = true; + else if (type == FilamentTempType::LowTemp) + has_low_temperature_filament = true; + } + + if (has_high_temperature_filament && has_low_temperature_filament) + return HighLowCompatible; + else if (has_high_temperature_filament) + return HighTemp; + else if (has_low_temperature_filament) + return LowTemp; + return HighLowCompatible; +} //BBS: this function is used to check whether multi filament can be printed StringObjectException Print::check_multi_filament_valid(const Print& print) @@ -1613,8 +1637,12 @@ std::map getObjectExtruderMap(const Print& print) { } // Slicing process, running at a background thread. -void Print::process(bool use_cache) +void Print::process(long long *time_cost_with_cache, bool use_cache) { + long long start_time = 0, end_time = 0; + if (time_cost_with_cache) + *time_cost_with_cache = 0; + name_tbb_thread_pool_threads_set_locale(); //compute the PrintObject with the same geometries @@ -1775,6 +1803,16 @@ void Print::process(bool use_cache) } } ); + + for (PrintObject* obj : m_objects) { + if (need_slicing_objects.count(obj) != 0) { + obj->detect_overhangs_for_lift(); + } + else { + if (obj->set_started(posDetectOverhangsForLift)) + obj->set_done(posDetectOverhangsForLift); + } + } } else { for (PrintObject *obj : m_objects) { @@ -1791,6 +1829,8 @@ void Print::process(bool use_cache) obj->set_done(posIroning); if (obj->set_started(posSupportMaterial)) obj->set_done(posSupportMaterial); + if (obj->set_started(posDetectOverhangsForLift)) + obj->set_done(posDetectOverhangsForLift); } else { obj->make_perimeters(); @@ -1804,8 +1844,10 @@ void Print::process(bool use_cache) for (PrintObject *obj : m_objects) { - if (need_slicing_objects.count(obj) == 0) + if (need_slicing_objects.count(obj) == 0) { obj->copy_layers_from_shared_object(); + obj->copy_layers_overhang_from_shared_object(); + } } if (this->set_started(psWipeTower)) { @@ -1824,6 +1866,9 @@ void Print::process(bool use_cache) if (this->set_started(psSkirtBrim)) { this->set_status(70, L("Generating skirt & brim")); + if (time_cost_with_cache) + start_time = (long long)Slic3r::Utils::get_current_time_utc(); + m_skirt.clear(); m_skirt_convex_hull.clear(); m_first_layer_convex_hull.points.clear(); @@ -1908,6 +1953,11 @@ void Print::process(bool use_cache) this->finalize_first_layer_convex_hull(); this->set_done(psSkirtBrim); + + if (time_cost_with_cache) { + end_time = (long long)Slic3r::Utils::get_current_time_utc(); + *time_cost_with_cache = *time_cost_with_cache + end_time - start_time; + } } //BBS for (PrintObject *obj : m_objects) { @@ -1925,18 +1975,6 @@ void Print::process(bool use_cache) } } - // BBS - for (PrintObject* obj : m_objects) { - if (need_slicing_objects.count(obj) != 0) { - obj->detect_overhangs_for_lift(); - } - else { - obj->copy_layers_overhang_from_shared_object(); - if (obj->set_started(posDetectOverhangsForLift)) - obj->set_done(posDetectOverhangsForLift); - } - } - // BBS if(!m_no_check) { @@ -2229,6 +2267,77 @@ Vec2d Print::translate_to_print_space(const Vec2d &point) const { Vec2d Print::translate_to_print_space(const Point &point) const { return Vec2d(unscaled(point.x()) - m_origin(0), unscaled(point.y()) - m_origin(1)); } + +FilamentTempType Print::get_filament_temp_type(const std::string& filament_type) +{ + const static std::string HighTempFilamentStr = "high_temp_filament"; + const static std::string LowTempFilamentStr = "low_temp_filament"; + const static std::string HighLowCompatibleFilamentStr = "high_low_compatible_filament"; + static std::unordered_map>filament_temp_type_map; + + if (filament_temp_type_map.empty()) { + fs::path file_path = fs::path(resources_dir()) / "info" / "filament_info.json"; + std::ifstream in(file_path.string()); + json j; + try{ + j = json::parse(in); + in.close(); + auto&&high_temp_filament_arr =j[HighTempFilamentStr].get < std::vector>(); + filament_temp_type_map[HighTempFilamentStr] = std::unordered_set(high_temp_filament_arr.begin(), high_temp_filament_arr.end()); + auto&& low_temp_filament_arr = j[LowTempFilamentStr].get < std::vector>(); + filament_temp_type_map[LowTempFilamentStr] = std::unordered_set(low_temp_filament_arr.begin(), low_temp_filament_arr.end()); + auto&& high_low_compatible_filament_arr = j[HighLowCompatibleFilamentStr].get < std::vector>(); + filament_temp_type_map[HighLowCompatibleFilamentStr] = std::unordered_set(high_low_compatible_filament_arr.begin(), high_low_compatible_filament_arr.end()); + } + catch (const json::parse_error& err){ + in.close(); + BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": parse " << file_path.string() << " got a nlohmann::detail::parse_error, reason = " << err.what(); + filament_temp_type_map[HighTempFilamentStr] = {"ABS","ASA","PC","PA","PA-CF","PA6-CF","PET-CF","PPS","PPS-CF","PPA-GF","PPA-CF"}; + filament_temp_type_map[LowTempFilamentStr] = {"PLA","TPU","PLA-CF","PLA-AERO","PVA"}; + filament_temp_type_map[HighLowCompatibleFilamentStr] = { "HIPS","PETG" }; + } + } + + if (filament_temp_type_map[HighLowCompatibleFilamentStr].find(filament_type) != filament_temp_type_map[HighLowCompatibleFilamentStr].end()) + return HighLowCompatible; + if (filament_temp_type_map[HighTempFilamentStr].find(filament_type) != filament_temp_type_map[HighTempFilamentStr].end()) + return HighTemp; + if (filament_temp_type_map[LowTempFilamentStr].find(filament_type) != filament_temp_type_map[LowTempFilamentStr].end()) + return LowTemp; + return Undefine; +} + +int Print::get_hrc_by_nozzle_type(const NozzleType&type) +{ + static std::mapnozzle_type_to_hrc; + if (nozzle_type_to_hrc.empty()) { + fs::path file_path = fs::path(resources_dir()) / "info" / "nozzle_info.json"; + std::ifstream in(file_path.string()); + json j; + try { + j = json::parse(in); + in.close(); + for (const auto& elem : j["nozzle_hrc"].items()) + nozzle_type_to_hrc[elem.key()] = elem.value(); + } + catch (const json::parse_error& err) { + in.close(); + BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": parse " << file_path.string() << " got a nlohmann::detail::parse_error, reason = " << err.what(); + nozzle_type_to_hrc = { + {"hardened_steel",55}, + {"stainless_steel",20}, + {"brass",2}, + {"undefine",0} + }; + } + } + auto iter = nozzle_type_to_hrc.find(NozzleTypeEumnToStr[type]); + if (iter != nozzle_type_to_hrc.end()) + return iter->second; + //0 represents undefine + return 0; +} + void Print::finalize_first_layer_convex_hull() { append(m_first_layer_convex_hull.points, m_skirt_convex_hull); @@ -2656,6 +2765,8 @@ std::string PrintStatistics::finalize_output_path(const std::string &path_in) co #define JSON_LAYER_ID "layer_id" #define JSON_LAYER_SLICED_POLYGONS "sliced_polygons" #define JSON_LAYER_SLLICED_BBOXES "sliced_bboxes" +#define JSON_LAYER_OVERHANG_POLYGONS "overhang_polygons" +#define JSON_LAYER_OVERHANG_BBOX "overhang_bbox" #define JSON_SUPPORT_LAYER_ISLANDS "support_islands" #define JSON_SUPPORT_LAYER_FILLS "support_fills" @@ -3292,6 +3403,19 @@ void extract_layer(const json& layer_json, Layer& layer) { layer.lslices_bboxes.push_back(std::move(bbox)); } + //overhang_polygons + int overhang_polygons_count = layer_json[JSON_LAYER_OVERHANG_POLYGONS].size(); + for (int polygon_index = 0; polygon_index < overhang_polygons_count; polygon_index++) + { + ExPolygon polygon; + + polygon = layer_json[JSON_LAYER_OVERHANG_POLYGONS][polygon_index]; + layer.loverhangs.push_back(std::move(polygon)); + } + + //overhang_box + layer.loverhangs_bbox = layer_json[JSON_LAYER_OVERHANG_BBOX]; + //layer_regions int layer_region_count = layer.region_count(); for (int layer_region_index = 0; layer_region_index < layer_region_count; layer_region_index++) @@ -3367,7 +3491,7 @@ int Print::export_cached_data(const std::string& directory, bool with_space) boost::filesystem::path directory_path(directory); auto convert_layer_to_json = [](json& layer_json, const Layer* layer) { - json slice_polygons_json = json::array(), slice_bboxs_json = json::array(), layer_regions_json = json::array(); + json slice_polygons_json = json::array(), slice_bboxs_json = json::array(), overhang_polygons_json = json::array(), layer_regions_json = json::array(); layer_json[JSON_LAYER_PRINT_Z] = layer->print_z; layer_json[JSON_LAYER_HEIGHT] = layer->height; layer_json[JSON_LAYER_SLICE_Z] = layer->slice_z; @@ -3390,6 +3514,16 @@ int Print::export_cached_data(const std::string& directory, bool with_space) } layer_json[JSON_LAYER_SLLICED_BBOXES] = std::move(slice_bboxs_json); + //overhang_polygons + for (const ExPolygon& overhang_polygon : layer->loverhangs) { + json overhang_polygon_json = overhang_polygon; + overhang_polygons_json.push_back(std::move(overhang_polygon_json)); + } + layer_json[JSON_LAYER_OVERHANG_POLYGONS] = std::move(overhang_polygons_json); + + //overhang_box + layer_json[JSON_LAYER_OVERHANG_BBOX] = layer->loverhangs_bbox; + for (const LayerRegion *layer_region : layer->regions()) { json region_json = *layer_region; diff --git a/src/libslic3r/Print.hpp b/src/libslic3r/Print.hpp index 3f08414ddf4..afa04efce46 100644 --- a/src/libslic3r/Print.hpp +++ b/src/libslic3r/Print.hpp @@ -92,8 +92,8 @@ enum PrintObjectStep { posSlice, posPerimeters,posEstimateCurledExtrusions, posPrepareInfill, posInfill, posIroning, posSupportMaterial, posSimplifyPath, posSimplifySupportPath, // BBS - posSimplifyInfill, posDetectOverhangsForLift, + posSimplifyWall, posSimplifyInfill, posCount, }; @@ -779,6 +779,12 @@ class ConstPrintRegionPtrsAdaptor : public ConstVectorOfPtrsAdaptor }; */ +enum FilamentTempType { + HighTemp=0, + LowTemp, + HighLowCompatible, + Undefine +}; // The complete print tray with possibly multiple objects. class Print : public PrintBaseWithState { @@ -805,7 +811,7 @@ class Print : public PrintBaseWithState ApplyStatus apply(const Model &model, DynamicPrintConfig config) override; - void process(bool use_cache = false) override; + void process(long long *time_cost_with_cache = nullptr, bool use_cache = false) override; // Exports G-code into a file name based on the path_template, returns the file path of the generated G-code file. // If preview_data is not null, the preview_data is filled in for the G-code visualization (not used by the command line Slic3r). std::string export_gcode(const std::string& path_template, GCodeProcessorResult* result, ThumbnailsGeneratorCallback thumbnail_cb = nullptr); @@ -929,8 +935,18 @@ class Print : public PrintBaseWithState Vec2d translate_to_print_space(const Vec2d &point) const; // scaled point Vec2d translate_to_print_space(const Point &point) const; - + static FilamentTempType get_filament_temp_type(const std::string& filament_type); + static int get_hrc_by_nozzle_type(const NozzleType& type); static bool check_multi_filaments_compatibility(const std::vector& filament_types); + // similar to check_multi_filaments_compatibility, but the input is int, and may be negative (means unset) + static bool is_filaments_compatible(const std::vector& types); + // get the compatible filament type of a multi-material object + // Rule: + // 1. LowTemp+HighLowCompatible=LowTemp + // 2. HighTemp++HighLowCompatible=HighTemp + // 3. LowTemp+HighTemp+...=HighLowCompatible + // Unset types are just ignored. + static int get_compatible_filament_type(const std::set& types); protected: // Invalidates the step, and its depending steps in Print. diff --git a/src/libslic3r/PrintBase.hpp b/src/libslic3r/PrintBase.hpp index 70198e8938e..f7c31038b2b 100644 --- a/src/libslic3r/PrintBase.hpp +++ b/src/libslic3r/PrintBase.hpp @@ -422,7 +422,7 @@ class PrintBase : public ObjectBase // After calling the apply() function, call set_task() to limit the task to be processed by process(). virtual void set_task(const TaskParams ¶ms) {} // Perform the calculation. This is the only method that is to be called at a worker thread. - virtual void process(bool use_cache = false) = 0; + virtual void process(long long *time_cost_with_cache = nullptr, bool use_cache = false) = 0; virtual int export_cached_data(const std::string& dir_path, bool with_space=false) { return 0;} virtual int load_cached_data(const std::string& directory) { return 0;} // Clean up after process() finished, either with success, error or if canceled. diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index 65855fdf6c5..fc038a61fa9 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -1660,8 +1660,8 @@ def = this->add("filament_loading_speed", coFloats); // BBS def = this->add("temperature_vitrification", coInts); - def->label = L("Temperature of vitrificaiton"); - def->tooltip = L("Material becomes soft at this temperature. Thus the heatbed cannot be hotter than this tempature"); + def->label = L("Softening temperature"); + def->tooltip = L("The material softens at this temperature, so when the bed temperature is equal to or greater than it, it's highly recommended to open the front door and/or remove the upper glass to avoid cloggings."); def->mode = comSimple; def->set_default_value(new ConfigOptionInts{ 100 }); diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp index ad5fdfb5ea2..8cdf698b414 100644 --- a/src/libslic3r/PrintConfig.hpp +++ b/src/libslic3r/PrintConfig.hpp @@ -225,6 +225,13 @@ enum NozzleType { ntCount }; +static std::unordered_mapNozzleTypeEumnToStr = { + {NozzleType::ntUndefine, "undefine"}, + {NozzleType::ntHardenedSteel, "hardened_steel"}, + {NozzleType::ntStainlessSteel, "stainless_steel"}, + {NozzleType::ntBrass, "brass"} +}; + // BBS enum PrinterStructure { psUndefine=0, diff --git a/src/libslic3r/PrintObject.cpp b/src/libslic3r/PrintObject.cpp index f38a32ce1b8..00326dc2ab2 100644 --- a/src/libslic3r/PrintObject.cpp +++ b/src/libslic3r/PrintObject.cpp @@ -607,7 +607,7 @@ void PrintObject::detect_overhangs_for_lift() size_t num_layers = this->layer_count(); size_t num_raft_layers = m_slicing_params.raft_layers(); - m_print->set_status(78, L("Detect overhangs for auto-lift")); + m_print->set_status(71, L("Detect overhangs for auto-lift")); this->clear_overhangs_for_lift(); diff --git a/src/libslic3r/ProjectTask.hpp b/src/libslic3r/ProjectTask.hpp index a86a24cf47d..103d82073fc 100644 --- a/src/libslic3r/ProjectTask.hpp +++ b/src/libslic3r/ProjectTask.hpp @@ -105,6 +105,7 @@ class BBLModelTask { int job_id; int design_id; int profile_id; + int instance_id; std::string task_id; std::string model_id; std::string model_name; diff --git a/src/libslic3r/SLAPrint.cpp b/src/libslic3r/SLAPrint.cpp index f5efaa4454c..569d22501e4 100644 --- a/src/libslic3r/SLAPrint.cpp +++ b/src/libslic3r/SLAPrint.cpp @@ -686,7 +686,7 @@ bool SLAPrint::invalidate_step(SLAPrintStep step) return invalidated; } -void SLAPrint::process(bool use_cache) +void SLAPrint::process(long long *time_cost_with_cache, bool use_cache) { if (m_objects.empty()) return; diff --git a/src/libslic3r/SLAPrint.hpp b/src/libslic3r/SLAPrint.hpp index 5c838b36736..3fa6757d59e 100644 --- a/src/libslic3r/SLAPrint.hpp +++ b/src/libslic3r/SLAPrint.hpp @@ -451,7 +451,7 @@ class SLAPrint : public PrintBaseWithState std::vector print_object_ids() const override; ApplyStatus apply(const Model &model, DynamicPrintConfig config) override; void set_task(const TaskParams ¶ms) override; - void process(bool use_cache = false) override; + void process(long long *time_cost_with_cache = nullptr, bool use_cache = false) override; void finalize() override; // Returns true if an object step is done on all objects and there's at least one object. bool is_step_done(SLAPrintObjectStep step) const; diff --git a/src/libslic3r/TreeSupport.cpp b/src/libslic3r/TreeSupport.cpp index d32e8f9cc6f..5b3ec7049ac 100644 --- a/src/libslic3r/TreeSupport.cpp +++ b/src/libslic3r/TreeSupport.cpp @@ -3357,7 +3357,7 @@ std::vector TreeSupport::plan_layer_heights(std::vectornext_layer_nr: " << layer_heights[i].print_z << " " << layer_heights[i].height << " " + BOOST_LOG_TRIVIAL(trace) << "plan_layer_heights print_z, height, layer_nr->next_layer_nr: " << layer_heights[i].print_z << " " << layer_heights[i].height << " " << i << "->" << layer_heights[i].next_layer_nr << std::endl; } diff --git a/src/libslic3r/Utils.hpp b/src/libslic3r/Utils.hpp index 9fa53a32314..08f10b28876 100644 --- a/src/libslic3r/Utils.hpp +++ b/src/libslic3r/Utils.hpp @@ -65,7 +65,7 @@ #define CLI_FILAMENTS_DIFFERENT_TEMP -62 #define CLI_OBJECT_COLLISION_IN_SEQ_PRINT -63 #define CLI_OBJECT_COLLISION_IN_LAYER_PRINT -64 -#define CLI_SPIRAL_MODE_CANNOT_DUPLICATE -65 +#define CLI_SPIRAL_MODE_INVALID_PARAMS -65 #define CLI_SLICING_ERROR -100 #define CLI_GCODE_PATH_CONFLICTS -101 diff --git a/src/libslic3r/VariableWidth.cpp b/src/libslic3r/VariableWidth.cpp index 6f7407d7029..e01050e4a4a 100644 --- a/src/libslic3r/VariableWidth.cpp +++ b/src/libslic3r/VariableWidth.cpp @@ -123,11 +123,11 @@ static ExtrusionPaths thick_polyline_to_extrusion_paths_2(const ThickPolyline& t if (start_index != i){ path = ExtrusionPath(role); double length = lines[start_index].length(); - double sum = lines[start_index].length() * lines[start_index].a_width; + double sum = lines[start_index].length() * 0.5 * (lines[start_index].a_width + lines[start_index].b_width); path.polyline.append(lines[start_index].a); for (int idx = start_index + 1; idx < i; idx++) { length += lines[idx].length(); - sum += lines[idx].length() * lines[idx].a_width; + sum += lines[idx].length() * 0.5 * (lines[idx].a_width + lines[idx].b_width); path.polyline.append(lines[idx].a); } path.polyline.append(lines[i].a); diff --git a/src/slic3r/GUI/2DBed.cpp b/src/slic3r/GUI/2DBed.cpp index e7c2cbe5422..e0feac0605d 100644 --- a/src/slic3r/GUI/2DBed.cpp +++ b/src/slic3r/GUI/2DBed.cpp @@ -34,11 +34,13 @@ void Bed_2D::repaint(const std::vector& shape) // On MacOS the background is erased, on Windows the background is not erased // and on Linux / GTK the background is erased to gray color. // Fill DC with the background on Windows & Linux / GTK. -#ifdef _WIN32 - auto color = wxGetApp().get_highlight_default_clr(); -#else - auto color = wxSystemSettings::GetColour(wxSYS_COLOUR_3DLIGHT); //GetSystemColour -#endif + wxColour color; + if (wxGetApp().dark_mode()) {// SetBackgroundColour + color = wxColour(45, 45, 49); + } + else { + color = *wxWHITE; + } dc.SetPen(*new wxPen(color, 1, wxPENSTYLE_SOLID)); dc.SetBrush(*new wxBrush(color, wxBRUSHSTYLE_SOLID)); auto rect = GetUpdateRegion().GetBox(); diff --git a/src/slic3r/GUI/AmsMappingPopup.cpp b/src/slic3r/GUI/AmsMappingPopup.cpp index b717c8c7c1f..28c3010e7f9 100644 --- a/src/slic3r/GUI/AmsMappingPopup.cpp +++ b/src/slic3r/GUI/AmsMappingPopup.cpp @@ -1163,6 +1163,7 @@ void MappingContainer::doRender(wxDC& dc) AmsReplaceMaterialDialog::AmsReplaceMaterialDialog(wxWindow* parent) : DPIDialog(parent, wxID_ANY, _L("Auto Refill"), wxDefaultPosition, wxDefaultSize, wxSYSTEM_MENU | wxCAPTION | wxCLOSE_BOX) { + #ifdef __WINDOWS__ SetDoubleBuffered(true); #endif //__WINDOWS__ @@ -1331,8 +1332,19 @@ void AmsReplaceMaterialDialog::update_machine_obj(MachineObject* obj) m_scrollview_groups->SetMinSize(wxSize(FromDIP(400), height)); m_scrollview_groups->SetMaxSize(wxSize(FromDIP(400), height)); } else { - if (label_txt) - label_txt->SetLabelText(_L("There are currently no identical spare consumables available, and automatic replenishment is currently not possible. \n(Currently supporting automatic supply of consumables with the same brand, material type, and color)")); + if (!obj->is_function_supported(PrinterFunction::FUNC_FILAMENT_BACKUP)) { + label_txt->SetLabel(_L("The printer does not currently support auto refill.")); + } + else if (!obj->ams_auto_switch_filament_flag) { + label_txt->SetLabelText(_L("AMS filament backup is not enabled, please enable it in the AMS settings.")); + } + else { + label_txt->SetLabelText(_L("If there are two identical filaments in AMS, AMS filament backup will be enabled. \n(Currently supporting automatic supply of consumables with the same brand, material type, and color)")); + } + + label_txt->SetMinSize(wxSize(FromDIP(380), -1)); + label_txt->SetMaxSize(wxSize(FromDIP(380), -1)); + label_txt->Wrap(FromDIP(380)); } m_scrollview_groups->Layout(); diff --git a/src/slic3r/GUI/BedShapeDialog.cpp b/src/slic3r/GUI/BedShapeDialog.cpp index b784781412e..3d8fa092a37 100644 --- a/src/slic3r/GUI/BedShapeDialog.cpp +++ b/src/slic3r/GUI/BedShapeDialog.cpp @@ -132,6 +132,7 @@ void BedShapeDialog::build_dialog(const ConfigOptionPoints& default_pt, const Co { SetFont(wxGetApp().normal_font()); + SetBackgroundColour(*wxWHITE); m_panel = new BedShapePanel(this); m_panel->build_panel(default_pt, custom_texture, custom_model); @@ -246,6 +247,7 @@ void BedShapePanel::build_panel(const ConfigOptionPoints& default_pt, const std: ConfigOptionsGroupShp BedShapePanel::init_shape_options_page(const wxString& title) { wxPanel* panel = new wxPanel(m_shape_options_book); + panel->SetBackgroundColour(*wxWHITE); ConfigOptionsGroupShp optgroup = std::make_shared(panel, _L("Settings")); optgroup->label_width = 10; @@ -343,6 +345,8 @@ wxPanel* BedShapePanel::init_texture_panel() remove_btn->Bind(wxEVT_UPDATE_UI, ([this](wxUpdateUIEvent& e) { e.Enable(m_custom_texture != NONE); })); + parent->SetBackgroundColour(*wxWHITE); + return sizer; }; optgroup->append_line(line); @@ -431,6 +435,8 @@ wxPanel* BedShapePanel::init_model_panel() remove_btn->Bind(wxEVT_UPDATE_UI, ([this](wxUpdateUIEvent& e) { e.Enable(m_custom_model != NONE); })); + parent->SetBackgroundColour(*wxWHITE); + return sizer; }; optgroup->append_line(line); diff --git a/src/slic3r/GUI/BedShapeDialog.hpp b/src/slic3r/GUI/BedShapeDialog.hpp index f41ecf6fdd6..20201faf0f7 100644 --- a/src/slic3r/GUI/BedShapeDialog.hpp +++ b/src/slic3r/GUI/BedShapeDialog.hpp @@ -93,7 +93,7 @@ class BedShapeDialog : public DPIDialog BedShapePanel* m_panel; public: BedShapeDialog(wxWindow* parent) : DPIDialog(parent, wxID_ANY, _(L("Bed Shape")), - wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER) {} + wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE) {} void build_dialog(const ConfigOptionPoints& default_pt, const ConfigOptionString& custom_texture, const ConfigOptionString& custom_model); diff --git a/src/slic3r/GUI/CaliHistoryDialog.cpp b/src/slic3r/GUI/CaliHistoryDialog.cpp index e10d5e88d70..eeef068a456 100644 --- a/src/slic3r/GUI/CaliHistoryDialog.cpp +++ b/src/slic3r/GUI/CaliHistoryDialog.cpp @@ -124,16 +124,16 @@ void HistoryWindow::sync_history_result(MachineObject* obj) if (obj) m_calib_results_history = obj->pa_calib_tab; - sync_history_data(); - if (m_calib_results_history.empty()) { m_tips->SetLabel(_L("No History Result")); + return; } else { m_tips->SetLabel(_L("Success to get history result")); } m_tips->Refresh(); + sync_history_data(); } void HistoryWindow::on_device_connected(MachineObject* obj) @@ -191,8 +191,10 @@ void HistoryWindow::on_select_nozzle(wxCommandEvent& evt) void HistoryWindow::reqeust_history_result(MachineObject* obj) { if (curr_obj) { + // reset curr_obj->reset_pa_cali_history_result(); - sync_history_result(curr_obj); + m_calib_results_history.clear(); + sync_history_data(); float nozzle_value = get_nozzle_value(); if (nozzle_value > 0) { diff --git a/src/slic3r/GUI/CalibrationWizardPresetPage.cpp b/src/slic3r/GUI/CalibrationWizardPresetPage.cpp index cadc07ecb83..f889fc38abe 100644 --- a/src/slic3r/GUI/CalibrationWizardPresetPage.cpp +++ b/src/slic3r/GUI/CalibrationWizardPresetPage.cpp @@ -1139,6 +1139,9 @@ void CalibrationPresetPage::update_combobox_filaments(MachineObject* obj) { if (!obj) return; + if (!obj->is_info_ready()) + return; + //step 1: update combobox filament list float nozzle_value = get_nozzle_value(); obj->cali_selected_nozzle_dia = nozzle_value; diff --git a/src/slic3r/GUI/CalibrationWizardSavePage.cpp b/src/slic3r/GUI/CalibrationWizardSavePage.cpp index d2e027286b6..b399673682b 100644 --- a/src/slic3r/GUI/CalibrationWizardSavePage.cpp +++ b/src/slic3r/GUI/CalibrationWizardSavePage.cpp @@ -1292,7 +1292,7 @@ void CalibrationFlowCoarseSavePage::set_curr_flow_ratio(const float value) { bool CalibrationFlowCoarseSavePage::get_result(float* out_value, wxString* out_name) { // Check if the value is valid - if (m_coarse_flow_ratio <= 0.0 || m_coarse_flow_ratio >= 2.0) { + if (m_optimal_block_coarse->GetSelection() == -1 || m_coarse_flow_ratio <= 0.0 || m_coarse_flow_ratio >= 2.0) { MessageDialog msg_dlg(nullptr, _L("Please choose a block with smoothest top surface"), wxEmptyString, wxICON_WARNING | wxOK); msg_dlg.ShowModal(); return false; @@ -1424,7 +1424,7 @@ void CalibrationFlowFineSavePage::set_curr_flow_ratio(const float value) { bool CalibrationFlowFineSavePage::get_result(float* out_value, wxString* out_name) { // Check if the value is valid - if (m_fine_flow_ratio <= 0.0 || m_fine_flow_ratio >= 2.0) { + if (m_optimal_block_fine->GetSelection() == -1 || m_fine_flow_ratio <= 0.0 || m_fine_flow_ratio >= 2.0) { MessageDialog msg_dlg(nullptr, _L("Please choose a block with smoothest top surface."), wxEmptyString, wxICON_WARNING | wxOK); msg_dlg.ShowModal(); return false; diff --git a/src/slic3r/GUI/DeviceManager.cpp b/src/slic3r/GUI/DeviceManager.cpp index 4829b7e55cd..0977a08da54 100644 --- a/src/slic3r/GUI/DeviceManager.cpp +++ b/src/slic3r/GUI/DeviceManager.cpp @@ -16,11 +16,18 @@ #include #include #include +#include "fast_float/fast_float.h" #define CALI_DEBUG namespace pt = boost::property_tree; +float string_to_float(const std::string& str_value) { + float value = 0.0; + fast_float::from_chars(str_value.c_str(), str_value.c_str() + str_value.size(), value); + return value; +} + const int PRINTING_STAGE_COUNT = 32; std::string PRINTING_STAGE_STR[PRINTING_STAGE_COUNT] = { "printing", @@ -474,6 +481,18 @@ PrinterArch MachineObject::get_printer_arch() const return DeviceManager::get_printer_arch(printer_type); } +//BBS: check if machine is enclosed +bool MachineObject::is_printer_enclosed() const +{ + std::unordered_setenclosed_printers = { + "C12", + "BL-P002", + "BL-P001", + "C13" + }; + return enclosed_printers.find(printer_type) != enclosed_printers.end(); +} + MachineObject::MachineObject(NetworkAgent* agent, std::string name, std::string id, std::string ip) :dev_name(name), dev_id(id), @@ -1414,6 +1433,15 @@ int MachineObject::get_bed_temperature_limit() return BED_TEMP_LIMIT; } +bool MachineObject::is_makeworld_subtask() +{ + if (model_task && model_task->design_id > 0) { + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " model task id: " << model_task->task_id << " is makeworld model"; + return true; + } + return false; +} + bool MachineObject::is_sdcard_printing() { if (can_abort() @@ -2474,6 +2502,7 @@ bool MachineObject::is_in_printing_status(std::string status) return false; } + bool MachineObject::is_in_printing() { /* use print_status if print_status is valid */ @@ -2806,6 +2835,31 @@ int MachineObject::local_publish_json(std::string json_str, int qos) return result; } +std::string MachineObject::setting_id_to_type(std::string setting_id, std::string tray_type) +{ + std::string type; + + PresetBundle* preset_bundle = GUI::wxGetApp().preset_bundle; + if (preset_bundle) { + for (auto it = preset_bundle->filaments.begin(); it != preset_bundle->filaments.end(); it++) { + + if (it->filament_id.compare(setting_id) == 0) { + std::string display_filament_type; + it->config.get_filament_type(display_filament_type); + type = display_filament_type; + break; + } + } + } + + if (tray_type != type || type.empty()) { + if (type.empty()) {type = tray_type;} + BOOST_LOG_TRIVIAL(info) << "The values of tray_info_idx and tray_type do not match tray_info_idx " << setting_id << " tray_type " << tray_type; + } + + return type; +} + int MachineObject::parse_json(std::string payload) { CNumericLocalesSetter locales_setter; @@ -3269,7 +3323,7 @@ int MachineObject::parse_json(std::string payload) if (jj["nozzle_diameter"].is_number_float()) { nozzle_diameter = jj["nozzle_diameter"].get(); } else if (jj["nozzle_diameter"].is_string()) { - nozzle_diameter = stof(jj["nozzle_diameter"].get().c_str()); + nozzle_diameter = string_to_float(jj["nozzle_diameter"].get()); } } } @@ -3666,7 +3720,8 @@ int MachineObject::parse_json(std::string payload) curr_tray->tag_uid = "0"; if (tray_it->contains("tray_info_idx") && tray_it->contains("tray_type")) { curr_tray->setting_id = (*tray_it)["tray_info_idx"].get(); - std::string type = (*tray_it)["tray_type"].get(); + //std::string type = (*tray_it)["tray_type"].get(); + std::string type = setting_id_to_type(curr_tray->setting_id, (*tray_it)["tray_type"].get()); if (curr_tray->setting_id == "GFS00") { curr_tray->type = "PLA-S"; } @@ -3827,7 +3882,8 @@ int MachineObject::parse_json(std::string payload) vt_tray.tag_uid = "0"; if (jj["vt_tray"].contains("tray_info_idx") && jj["vt_tray"].contains("tray_type")) { vt_tray.setting_id = jj["vt_tray"]["tray_info_idx"].get(); - std::string type = jj["vt_tray"]["tray_type"].get(); + //std::string type = jj["vt_tray"]["tray_type"].get(); + std::string type = setting_id_to_type(vt_tray.setting_id, jj["vt_tray"]["tray_type"].get()); if (vt_tray.setting_id == "GFS00") { vt_tray.type = "PLA-S"; } @@ -3959,9 +4015,10 @@ int MachineObject::parse_json(std::string payload) BOOST_LOG_TRIVIAL(trace) << "ams_filament_setting, parse tray info"; vt_tray.nozzle_temp_max = std::to_string(jj["nozzle_temp_max"].get()); vt_tray.nozzle_temp_min = std::to_string(jj["nozzle_temp_min"].get()); - vt_tray.type = jj["tray_type"].get(); vt_tray.color = jj["tray_color"].get(); vt_tray.setting_id = jj["tray_info_idx"].get(); + //vt_tray.type = jj["tray_type"].get(); + vt_tray.type = setting_id_to_type(vt_tray.setting_id, jj["tray_info_idx"].get()); // delay update vt_tray.set_hold_count(); } else { @@ -3973,7 +4030,7 @@ int MachineObject::parse_json(std::string payload) BOOST_LOG_TRIVIAL(trace) << "ams_filament_setting, parse tray info"; tray_it->second->nozzle_temp_max = std::to_string(jj["nozzle_temp_max"].get()); tray_it->second->nozzle_temp_min = std::to_string(jj["nozzle_temp_min"].get()); - tray_it->second->type = jj["tray_type"].get(); + //tray_it->second->type = jj["tray_type"].get(); tray_it->second->color = jj["tray_color"].get(); /*tray_it->second->cols.clear(); @@ -3986,6 +4043,7 @@ int MachineObject::parse_json(std::string payload) }*/ tray_it->second->setting_id = jj["tray_info_idx"].get(); + tray_it->second->type = setting_id_to_type(tray_it->second->setting_id, jj["tray_type"].get()); // delay update tray_it->second->set_hold_count(); } else { @@ -4058,8 +4116,17 @@ int MachineObject::parse_json(std::string payload) std::string reason = jj["reason"].get(); GUI::wxGetApp().CallAfter([cali_mode, reason] { wxString info = ""; - if (reason == "invalid nozzle_diameter") { - info = _L("Invalid nozzle diameter"); + if (reason == "invalid nozzle_diameter" || reason == "nozzle_diameter is not supported") { + info = _L("This calibration does not support the currently selected nozzle diameter"); + } + else if (reason == "invalid handle_flowrate_cali param") { + info = _L("Current flowrate cali param is invalid"); + } + else if (reason == "nozzle_diameter is not matched") { + info = _L("Selected diameter and machine diameter do not match"); + } + else if (reason == "generate auto filament cali gcode failure") { + info = _L("Failed to generate cali gcode"); } else { info = reason; @@ -4164,7 +4231,7 @@ int MachineObject::parse_json(std::string payload) pa_calib_tab_nozzle_dia = jj["nozzle_diameter"].get(); } else if (jj["nozzle_diameter"].is_string()) { - pa_calib_tab_nozzle_dia = stof(jj["nozzle_diameter"].get().c_str()); + pa_calib_tab_nozzle_dia = string_to_float(jj["nozzle_diameter"].get()); } else { assert(false); @@ -4191,18 +4258,18 @@ int MachineObject::parse_json(std::string payload) if (jj["nozzle_diameter"].is_number_float()) { pa_calib_result.nozzle_diameter = jj["nozzle_diameter"].get(); } else if (jj["nozzle_diameter"].is_string()) { - pa_calib_result.nozzle_diameter = stof(jj["nozzle_diameter"].get().c_str()); + pa_calib_result.nozzle_diameter = string_to_float(jj["nozzle_diameter"].get()); } if ((*it)["k_value"].is_number_float()) pa_calib_result.k_value = (*it)["k_value"].get(); else if ((*it)["k_value"].is_string()) - pa_calib_result.k_value = stof((*it)["k_value"].get().c_str()); + pa_calib_result.k_value = string_to_float((*it)["k_value"].get()); if ((*it)["n_coef"].is_number_float()) pa_calib_result.n_coef = (*it)["n_coef"].get(); else if ((*it)["n_coef"].is_string()) - pa_calib_result.n_coef = stof((*it)["n_coef"].get().c_str()); + pa_calib_result.n_coef = string_to_float((*it)["n_coef"].get()); if (check_pa_result_validation(pa_calib_result)) pa_calib_tab.push_back(pa_calib_result); @@ -4238,18 +4305,18 @@ int MachineObject::parse_json(std::string payload) if (jj["nozzle_diameter"].is_number_float()) { pa_calib_result.nozzle_diameter = jj["nozzle_diameter"].get(); } else if (jj["nozzle_diameter"].is_string()) { - pa_calib_result.nozzle_diameter = stof(jj["nozzle_diameter"].get().c_str()); + pa_calib_result.nozzle_diameter = string_to_float(jj["nozzle_diameter"].get()); } if ((*it)["k_value"].is_number_float()) pa_calib_result.k_value = (*it)["k_value"].get(); else if ((*it)["k_value"].is_string()) - pa_calib_result.k_value = stof((*it)["k_value"].get().c_str()); + pa_calib_result.k_value = string_to_float((*it)["k_value"].get()); if ((*it)["n_coef"].is_number_float()) pa_calib_result.n_coef = (*it)["n_coef"].get(); else if ((*it)["n_coef"].is_string()) - pa_calib_result.n_coef = stof((*it)["n_coef"].get().c_str()); + pa_calib_result.n_coef = string_to_float((*it)["n_coef"].get()); if (it->contains("confidence")) { pa_calib_result.confidence = (*it)["confidence"].get(); @@ -4285,8 +4352,8 @@ int MachineObject::parse_json(std::string payload) flow_ratio_calib_result.tray_id = (*it)["tray_id"].get(); flow_ratio_calib_result.filament_id = (*it)["filament_id"].get(); flow_ratio_calib_result.setting_id = (*it)["setting_id"].get(); - flow_ratio_calib_result.nozzle_diameter = stof(jj["nozzle_diameter"].get().c_str()); - flow_ratio_calib_result.flow_ratio = stof((*it)["flow_ratio"].get().c_str()); + flow_ratio_calib_result.nozzle_diameter = string_to_float(jj["nozzle_diameter"].get()); + flow_ratio_calib_result.flow_ratio = string_to_float((*it)["flow_ratio"].get()); if (it->contains("confidence")) { flow_ratio_calib_result.confidence = (*it)["confidence"].get(); } else { @@ -4443,6 +4510,93 @@ void MachineObject::set_modeltask(BBLModelTask* task) model_task = task; } +void MachineObject::update_model_task() +{ + if (request_model_result > 10) return; + if (!m_agent) return; + if (!model_task) return; + if (!subtask_) return; + if (model_task->task_id != subtask_->task_id) { + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " times: " << request_model_result << " model_task_id !=subtask_id"; + return; + } + if (model_task->instance_id <= 0) { + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " times: " << request_model_result << " instance_id <= 0"; + return; + } + + if ((!subtask_id_.empty() && last_subtask_id_ != subtask_id_) || get_model_mall_result_need_retry) { + if (!subtask_id_.empty() && last_subtask_id_ != subtask_id_) { + BOOST_LOG_TRIVIAL(info) << "update_model_task: last=" << last_subtask_id_ << ", curr=" << subtask_id_; + last_subtask_id_ = subtask_id_; + request_model_result = 0; + } + if (get_model_mall_result_need_retry) { + BOOST_LOG_TRIVIAL(info) << "need retry"; + get_model_mall_result_need_retry = false; + } + } else { + BOOST_LOG_TRIVIAL(info) << "subtask_id_ no change and do not need retry"; + return; + } + + int curr_instance_id = model_task->instance_id; + if (rating_info) { + delete rating_info; + rating_info = nullptr; + } + get_model_task_thread = new boost::thread([this, curr_instance_id]{ + try { + std::string rating_result; + unsigned int http_code = 404; + std::string http_error; + int res = -1; + res = m_agent->get_model_mall_rating_result(curr_instance_id, rating_result, http_code, http_error); + request_model_result++; + BOOST_LOG_TRIVIAL(info) << "request times: " << request_model_result << " http code: " << http_code; + rating_info = new RatingInfo(); + rating_info->http_code = http_code; + if (0 == res && 200 == http_code) { + try { + json rating_json = json::parse(rating_result); + if (rating_json.contains("id")) { + rating_info->rating_id = rating_json["id"].get(); + //rating id is necessary info, so rating id must have + request_model_result = 0; + rating_info->request_successful = true; + BOOST_LOG_TRIVIAL(info) << "get rating id"; + } else { + rating_info->request_successful = false; + BOOST_LOG_TRIVIAL(info) << "can not get rating id"; + return; + } + if (rating_json.contains("score")) { + rating_info->start_count = rating_json["score"].get(); + } + if (rating_json.contains("content")) + rating_info->content = rating_json["content"].get(); + if (rating_json.contains("successPrinted")) + rating_info->success_printed = rating_json["successPrinted"].get(); + if (rating_json.contains("images")) { + rating_info->image_url_paths = rating_json["images"].get>(); + } + } catch (...) { + BOOST_LOG_TRIVIAL(info) << "parse model mall result json failed"; + } + } + else { + rating_info->request_successful = false; + BOOST_LOG_TRIVIAL(info) << "model mall result request failed, request time: " << request_model_result << " http_code: " << http_code + << " error msg: " << http_error; + return; + } + } + catch (...) { + BOOST_LOG_TRIVIAL(info) << "get mall model rating id failed and hide scoring page"; + } + }); +} + void MachineObject::update_slice_info(std::string project_id, std::string profile_id, std::string subtask_id, int plate_idx) { if (!m_agent) return; @@ -4478,22 +4632,26 @@ void MachineObject::update_slice_info(std::string project_id, std::string profil std::string http_body; if (m_agent->get_subtask_info(subtask_id, &subtask_json, &http_code, &http_body) == 0) { try { - json task_j = json::parse(subtask_json); - if (task_j.contains("content")) { - std::string content_str = task_j["content"].get(); - json content_j = json::parse(content_str); - plate_index = content_j["info"]["plate_idx"].get(); - } + if (!subtask_json.empty()){ + + json task_j = json::parse(subtask_json); + if (task_j.contains("content")) { + std::string content_str = task_j["content"].get(); + json content_j = json::parse(content_str); + plate_index = content_j["info"]["plate_idx"].get(); + } - if (task_j.contains("context") && task_j["context"].contains("plates")) { - for (int i = 0; i < task_j["context"]["plates"].size(); i++) { - if (task_j["context"]["plates"][i].contains("index") && task_j["context"]["plates"][i]["index"].get() == plate_index) { - slice_info->thumbnail_url = task_j["context"]["plates"][i]["thumbnail"]["url"].get(); - BOOST_LOG_TRIVIAL(trace) << "task_info: thumbnail url=" << slice_info->thumbnail_url; + if (task_j.contains("context") && task_j["context"].contains("plates")) { + for (int i = 0; i < task_j["context"]["plates"].size(); i++) { + if (task_j["context"]["plates"][i].contains("index") && task_j["context"]["plates"][i]["index"].get() == plate_index) { + slice_info->thumbnail_url = task_j["context"]["plates"][i]["thumbnail"]["url"].get(); + BOOST_LOG_TRIVIAL(trace) << "task_info: thumbnail url=" << slice_info->thumbnail_url; + } } } - } else { - BOOST_LOG_TRIVIAL(error) << "task_info: no context or plates"; + else { + BOOST_LOG_TRIVIAL(error) << "task_info: no context or plates"; + } } } catch(...) { @@ -4523,8 +4681,8 @@ void MachineObject::update_slice_info(std::string project_id, std::string profil FilamentInfo f; f.color = filament["color"].get(); f.type = filament["type"].get(); - f.used_g = stof(filament["used_g"].get()); - f.used_m = stof(filament["used_m"].get()); + f.used_g = string_to_float(filament["used_g"].get()); + f.used_m = string_to_float(filament["used_m"].get()); slice_info->filaments_info.push_back(f); } } diff --git a/src/slic3r/GUI/DeviceManager.hpp b/src/slic3r/GUI/DeviceManager.hpp index 9223694610f..a3ff947dd6d 100644 --- a/src/slic3r/GUI/DeviceManager.hpp +++ b/src/slic3r/GUI/DeviceManager.hpp @@ -179,6 +179,16 @@ enum ManualPaCaliMethod { PA_PATTERN, }; +struct RatingInfo { + bool request_successful; + int http_code; + int rating_id; + int start_count; + bool success_printed; + std::string content; + std::vector image_url_paths; +}; + class AmsTray { public: AmsTray(std::string tray_id) { @@ -461,6 +471,7 @@ class MachineObject std::string printer_type; /* model_id */ PrinterSeries get_printer_series() const; PrinterArch get_printer_arch() const; + bool is_printer_enclosed() const; std::string printer_thumbnail_img; std::string monitor_upgrade_printer_img; @@ -761,15 +772,23 @@ class MachineObject std::string profile_id_; std::string task_id_; std::string subtask_id_; + std::string last_subtask_id_; BBLSliceInfo* slice_info {nullptr}; boost::thread* get_slice_info_thread { nullptr }; + boost::thread* get_model_task_thread { nullptr }; + + bool is_makeworld_subtask(); int plate_index { -1 }; std::string m_gcode_file; int gcode_file_prepare_percent = 0; BBLSubTask* subtask_; - BBLModelTask* model_task; + BBLModelTask *model_task { nullptr }; + RatingInfo* rating_info { nullptr }; + int request_model_result = 0; + bool get_model_mall_result_need_retry = false; + std::string obj_subtask_id; // subtask_id == 0 for sdcard std::string subtask_name; bool is_sdcard_printing(); @@ -906,9 +925,11 @@ class MachineObject int parse_json(std::string payload); int publish_gcode(std::string gcode_str); + std::string setting_id_to_type(std::string setting_id, std::string tray_type); BBLSubTask* get_subtask(); BBLModelTask* get_modeltask(); void set_modeltask(BBLModelTask* task); + void update_model_task(); void update_slice_info(std::string project_id, std::string profile_id, std::string subtask_id, int plate_idx); bool m_firmware_valid { false }; diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp index 02309a8d932..036e7cbb340 100644 --- a/src/slic3r/GUI/GLCanvas3D.cpp +++ b/src/slic3r/GUI/GLCanvas3D.cpp @@ -1767,8 +1767,11 @@ Points GLCanvas3D::estimate_wipe_tower_points(int plate_index, bool global) cons float y = dynamic_cast(proj_cfg.option("wipe_tower_y"))->get_at(plate_index); if (plate_index >= plate_count) { plate_index = 0; } float w = dynamic_cast(m_config->option("prime_tower_width"))->value; - float v = dynamic_cast(m_config->option("prime_volume"))->value; - Vec3d wipe_tower_size = ppl.get_plate(plate_index)->estimate_wipe_tower_size(w, v); + auto part_plate = ppl.get_plate(plate_index); + const auto &wipe_tower_data = print.wipe_tower_data(part_plate->get_extruders(true).size()); + // float v = dynamic_cast(m_config->option("prime_volume"))->value; + const DynamicPrintConfig &print_cfg = wxGetApp().preset_bundle->prints.get_edited_preset().config; + Vec3d wipe_tower_size = part_plate->estimate_wipe_tower_size(print_cfg, w, wipe_tower_data.depth); if (wipe_tower_size(1) == 0) { // when depth is unavailable (no items on this plate), we have to estimate the depth using the extruder number of all plates @@ -2656,7 +2659,8 @@ void GLCanvas3D::reload_scene(bool refresh_immediately, bool force_full_scene_re const Print* print = m_process->fff_print(); const auto& wipe_tower_data = print->wipe_tower_data(filaments_count); float brim_width = wipe_tower_data.brim_width; - Vec3d wipe_tower_size = ppl.get_plate(plate_id)->estimate_wipe_tower_size(w, wipe_tower_data.depth); + const DynamicPrintConfig &print_cfg = wxGetApp().preset_bundle->prints.get_edited_preset().config; + Vec3d wipe_tower_size = ppl.get_plate(plate_id)->estimate_wipe_tower_size(print_cfg, w, wipe_tower_data.depth); const float margin = 15.f; BoundingBoxf3 plate_bbox = wxGetApp().plater()->get_partplate_list().get_plate(plate_id)->get_bounding_box(); diff --git a/src/slic3r/GUI/GLCanvas3D.hpp b/src/slic3r/GUI/GLCanvas3D.hpp index e4e841f6d7e..fb1780c7bce 100644 --- a/src/slic3r/GUI/GLCanvas3D.hpp +++ b/src/slic3r/GUI/GLCanvas3D.hpp @@ -480,8 +480,6 @@ class GLCanvas3D bool avoid_extrusion_cali_region = true; //BBS: add more arrangeSettings bool is_seq_print = false; - float bed_shrink_x = 0.f; - float bed_shrink_y = 0.f; bool align_to_y_axis = false; }; diff --git a/src/slic3r/GUI/GUI_App.cpp b/src/slic3r/GUI/GUI_App.cpp index 1f078392f15..43deab6482d 100644 --- a/src/slic3r/GUI/GUI_App.cpp +++ b/src/slic3r/GUI/GUI_App.cpp @@ -2339,6 +2339,7 @@ bool GUI_App::on_init_inner() } #endif + BOOST_LOG_TRIVIAL(info) << boost::format("gui mode, Current BambuStudio Version %1%")%SLIC3R_VERSION; // Enable this to get the default Win32 COMCTRL32 behavior of static boxes. // wxSystemOptions::SetOption("msw.staticbox.optimized-paint", 0); // Enable this to disable Windows Vista themes for all wxNotebooks. The themes seem to lead to terrible diff --git a/src/slic3r/GUI/ImageGrid.cpp b/src/slic3r/GUI/ImageGrid.cpp index 50f16d186a8..e1ba370c075 100644 --- a/src/slic3r/GUI/ImageGrid.cpp +++ b/src/slic3r/GUI/ImageGrid.cpp @@ -92,8 +92,12 @@ void Slic3r::GUI::ImageGrid::SetFileType(int type, std::string const &storage) void Slic3r::GUI::ImageGrid::SetGroupMode(int mode) { - if (!m_file_sys || m_file_sys->GetCount() == 0) + if (!m_file_sys) + return; + if (m_file_sys->GetCount() == 0) { + m_file_sys->SetGroupMode((PrinterFileSystem::GroupMode) mode); return; + } wxSize size = GetClientSize(); int index = (m_row_offset + 1 < m_row_count || m_row_count == 0) ? m_row_offset / 4 * m_col_count @@ -220,6 +224,7 @@ void ImageGrid::UpdateLayout() void Slic3r::GUI::ImageGrid::UpdateFocusRange() { + if (!m_file_sys) return; wxSize size = GetClientSize(); wxPoint off; int index = firstItem(size, off); diff --git a/src/slic3r/GUI/Jobs/ArrangeJob.cpp b/src/slic3r/GUI/Jobs/ArrangeJob.cpp index 745754d7bd5..708e65f806f 100644 --- a/src/slic3r/GUI/Jobs/ArrangeJob.cpp +++ b/src/slic3r/GUI/Jobs/ArrangeJob.cpp @@ -491,10 +491,7 @@ void ArrangeJob::on_exception(const std::exception_ptr &eptr) void ArrangeJob::process() { - const GLCanvas3D::ArrangeSettings &settings = - static_cast(m_plater->canvas3D())->get_arrange_settings(); auto & partplate_list = m_plater->get_partplate_list(); - auto& print = wxGetApp().plater()->get_partplate_list().get_current_fff_print(); const Slic3r::DynamicPrintConfig& global_config = wxGetApp().preset_bundle->full_config(); PresetBundle* preset_bundle = wxGetApp().preset_bundle; @@ -502,14 +499,14 @@ void ArrangeJob::process() if (is_bbl && params.avoid_extrusion_cali_region && global_config.opt_bool("scan_first_layer")) partplate_list.preprocess_nonprefered_areas(m_unselected, MAX_NUM_PLATES); - update_arrange_params(params, *m_plater, m_selected); + update_arrange_params(params, m_plater->config(), m_selected); update_selected_items_inflation(m_selected, m_plater->config(), params); update_unselected_items_inflation(m_unselected, m_plater->config(), params); update_selected_items_axis_align(m_selected, m_plater->config(), params); Points bedpts = get_shrink_bedpts(m_plater->config(),params); - double scaled_exclusion_gap = scale_(1); - partplate_list.preprocess_exclude_areas(params.excluded_regions, 1, scaled_exclusion_gap); + + partplate_list.preprocess_exclude_areas(params.excluded_regions, 1, scale_(1)); BOOST_LOG_TRIVIAL(debug) << "arrange bedpts:" << bedpts[0].transpose() << ", " << bedpts[1].transpose() << ", " << bedpts[2].transpose() << ", " << bedpts[3].transpose(); @@ -520,11 +517,11 @@ void ArrangeJob::process() }; { - BOOST_LOG_TRIVIAL(debug)<< "Arrange full params: "<< params.to_json(); - BOOST_LOG_TRIVIAL(debug) << "items selected before arrange: "; - for (auto selected : m_selected) - BOOST_LOG_TRIVIAL(debug) << selected.name << ", extruder: " << selected.extrude_ids.back() << ", bed: " << selected.bed_idx - << ", bed_temp: " << selected.first_bed_temp << ", print_temp: " << selected.print_temp; + BOOST_LOG_TRIVIAL(warning)<< "Arrange full params: "<< params.to_json(); + BOOST_LOG_TRIVIAL(info) << boost::format("arrange: items selected before arranging: %1%") % m_selected.size(); + for (auto selected : m_selected) { + BOOST_LOG_TRIVIAL(debug) << selected.name << ", extruder: " << selected.extrude_ids.back() << ", bed: " << selected.bed_idx<<", filemant_type:" << selected.filament_temp_type; + } BOOST_LOG_TRIVIAL(debug) << "items unselected before arrange: "; for (auto item : m_unselected) BOOST_LOG_TRIVIAL(debug) << item.name << ", bed: " << item.bed_idx << ", trans: " << item.translation.transpose(); @@ -535,7 +532,7 @@ void ArrangeJob::process() // sort by item id std::sort(m_selected.begin(), m_selected.end(), [](auto a, auto b) {return a.itemid < b.itemid; }); { - BOOST_LOG_TRIVIAL(debug) << "items selected after arrange: "; + BOOST_LOG_TRIVIAL(info) << boost::format("arrange: items unselected before arranging: %1%") % m_unselected.size(); for (auto selected : m_selected) BOOST_LOG_TRIVIAL(debug) << selected.name << ", extruder: " << selected.extrude_ids.back() << ", bed: " << selected.bed_idx << ", bed_temp: " << selected.first_bed_temp << ", print_temp: " << selected.print_temp @@ -709,23 +706,6 @@ double bed_stride_y(const Plater* plater) { return (1. + LOGICAL_BED_GAP) * beddepth; } - -arrangement::ArrangeParams get_arrange_params(Plater *p) -{ - const GLCanvas3D::ArrangeSettings &settings = - static_cast(p->canvas3D())->get_arrange_settings(); - - arrangement::ArrangeParams params; - params.allow_rotations = settings.enable_rotation; - params.min_obj_distance = scaled(settings.distance); - //BBS: add specific params - params.is_seq_print = settings.is_seq_print; - params.bed_shrink_x = settings.bed_shrink_x; - params.bed_shrink_y = settings.bed_shrink_y; - - return params; -} - // call before get selected and unselected arrangement::ArrangeParams init_arrange_params(Plater *p) { @@ -745,8 +725,6 @@ arrangement::ArrangeParams init_arrange_params(Plater *p) params.avoid_extrusion_cali_region = settings.avoid_extrusion_cali_region; params.is_seq_print = settings.is_seq_print; params.min_obj_distance = scaled(settings.distance); - params.bed_shrink_x = settings.bed_shrink_x; - params.bed_shrink_y = settings.bed_shrink_y; params.align_to_y_axis = settings.align_to_y_axis; int state = p->get_prepare_state(); @@ -756,28 +734,12 @@ arrangement::ArrangeParams init_arrange_params(Plater *p) params.is_seq_print = plate->get_real_print_seq() == PrintSequence::ByObject; } - if (params.is_seq_print) - params.min_obj_distance = std::max(params.min_obj_distance, scaled(params.cleareance_radius + 0.001)); // +0.001mm to avoid clearance check fail due to rounding error - return params; -} - -//after get selected call this to update bed_shrink -void update_arrange_params(arrangement::ArrangeParams ¶ms, const Plater &p, const arrangement::ArrangePolygons &selected) -{ - const GLCanvas3D::ArrangeSettings &settings = static_cast(p.canvas3D())->get_arrange_settings(); - auto & print = wxGetApp().plater()->get_partplate_list().get_current_fff_print(); - double skirt_distance = print.has_skirt() ? print.config().skirt_distance.value : 0; - // Note: skirt_distance is now defined between outermost brim and skirt, not the object and skirt. - // So we can't do max but do adding instead. - params.brim_skirt_distance = skirt_distance; - params.bed_shrink_x = settings.bed_shrink_x + params.brim_skirt_distance; - params.bed_shrink_y = settings.bed_shrink_y + params.brim_skirt_distance; - // for sequential print, we need to inflate the bed because cleareance_radius is so large if (params.is_seq_print) { - float shift_dist = params.cleareance_radius / 2 - 5; - params.bed_shrink_x -= shift_dist; - params.bed_shrink_y -= shift_dist; + params.min_obj_distance = std::max(params.min_obj_distance, scaled(params.cleareance_radius + 0.001)); // +0.001mm to avoid clearance check fail due to rounding error + params.bed_shrink_x = BED_SHRINK_SEQ_PRINT; + params.bed_shrink_y = BED_SHRINK_SEQ_PRINT; } + return params; } }} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/Jobs/ArrangeJob.hpp b/src/slic3r/GUI/Jobs/ArrangeJob.hpp index d51822296ce..717fd38b264 100644 --- a/src/slic3r/GUI/Jobs/ArrangeJob.hpp +++ b/src/slic3r/GUI/Jobs/ArrangeJob.hpp @@ -75,13 +75,8 @@ static const constexpr double LOGICAL_BED_GAP = 1. / 5.; double bed_stride_x(const Plater* plater); double bed_stride_y(const Plater* plater); - -arrangement::ArrangeParams get_arrange_params(Plater *p); - arrangement::ArrangeParams init_arrange_params(Plater *p); -void update_arrange_params(arrangement::ArrangeParams ¶ms, const Plater &p, const arrangement::ArrangePolygons &selected); - }} // namespace Slic3r::GUI #endif // ARRANGEJOB_HPP diff --git a/src/slic3r/GUI/Jobs/FillBedJob.cpp b/src/slic3r/GUI/Jobs/FillBedJob.cpp index f96646096d6..40dbe30a2df 100644 --- a/src/slic3r/GUI/Jobs/FillBedJob.cpp +++ b/src/slic3r/GUI/Jobs/FillBedJob.cpp @@ -202,10 +202,7 @@ void FillBedJob::process() { if (m_object_idx == -1 || m_selected.empty()) return; - const GLCanvas3D::ArrangeSettings &settings = - static_cast(m_plater->canvas3D())->get_arrange_settings(); - - update_arrange_params(params, *m_plater, m_selected); + update_arrange_params(params, m_plater->config(), m_selected); m_bedpts = get_shrink_bedpts(m_plater->config(), params); auto &partplate_list = m_plater->get_partplate_list(); diff --git a/src/slic3r/GUI/Monitor.cpp b/src/slic3r/GUI/Monitor.cpp index 79fdf9a497f..6b9804e7374 100644 --- a/src/slic3r/GUI/Monitor.cpp +++ b/src/slic3r/GUI/Monitor.cpp @@ -274,7 +274,6 @@ void MonitorPanel::on_update_all(wxMouseEvent &event) return; set_default(); - m_status_info_panel->set_print_finish_status(false); update_all(); MachineObject *obj_ = dev->get_selected_machine(); diff --git a/src/slic3r/GUI/MsgDialog.cpp b/src/slic3r/GUI/MsgDialog.cpp index 720dca0f834..cceb1b5d885 100644 --- a/src/slic3r/GUI/MsgDialog.cpp +++ b/src/slic3r/GUI/MsgDialog.cpp @@ -302,10 +302,15 @@ static void add_msg_content(wxWindow* parent, wxBoxSizer* content_sizer, wxStrin page_size = wxSize(68 * em, page_height); } else { + Label* wrapped_text = new Label(html, msg); + wrapped_text->Wrap(68 * em); + msg = wrapped_text->GetLabel(); + wrapped_text->Destroy(); wxClientDC dc(parent); wxSize msg_sz = dc.GetMultiLineTextExtent(msg); - page_size = wxSize(std::min(msg_sz.GetX() + 2 * em, 68 * em), - std::min(msg_sz.GetY() + 2 * em, 68 * em)); + + page_size = wxSize(std::min(msg_sz.GetX(), 68 * em), + std::min(msg_sz.GetY(), 68 * em)); } html->SetMinSize(page_size); diff --git a/src/slic3r/GUI/PartPlate.cpp b/src/slic3r/GUI/PartPlate.cpp index f52628b8e0c..bd86ceaa3db 100644 --- a/src/slic3r/GUI/PartPlate.cpp +++ b/src/slic3r/GUI/PartPlate.cpp @@ -1576,21 +1576,26 @@ std::vector PartPlate::get_used_extruders() return used_extruders; } -Vec3d PartPlate::estimate_wipe_tower_size(const double w, const double d) const +Vec3d PartPlate::estimate_wipe_tower_size(const DynamicPrintConfig & config, const double w, const double d, int plate_extruder_size) const { Vec3d wipe_tower_size; - std::vector plate_extruders = get_extruders(true); + double layer_height = 0.08f; // hard code layer height double max_height = 0.f; wipe_tower_size.setZero(); wipe_tower_size(0) = w; - ConfigOption* layer_height_opt = wxGetApp().preset_bundle->prints.get_edited_preset().config.option("layer_height"); + const ConfigOption* layer_height_opt = config.option("layer_height"); if (layer_height_opt) layer_height = layer_height_opt->getFloat(); // empty plate - if (plate_extruders.empty()) + if (plate_extruder_size == 0) + { + std::vector plate_extruders = get_extruders(true); + plate_extruder_size = plate_extruders.size(); + } + if (plate_extruder_size == 0) return wipe_tower_size; for (int obj_idx = 0; obj_idx < m_model->objects.size(); obj_idx++) { @@ -1602,11 +1607,11 @@ Vec3d PartPlate::estimate_wipe_tower_size(const double w, const double d) const } wipe_tower_size(2) = max_height; - const DynamicPrintConfig &dconfig = wxGetApp().preset_bundle->prints.get_edited_preset().config; - auto timelapse_type = dconfig.option>("timelapse_type"); + //const DynamicPrintConfig &dconfig = wxGetApp().preset_bundle->prints.get_edited_preset().config; + auto timelapse_type = config.option>("timelapse_type"); bool timelapse_enabled = timelapse_type ? (timelapse_type->value == TimelapseType::tlSmooth) : false; - double depth = plate_extruders.size() == 1 ? 0 : d; + double depth = plate_extruder_size == 1 ? 0 : d; if (timelapse_enabled || depth > EPSILON) { float min_wipe_tower_depth = 0.f; auto iter = WipeTower::min_depth_per_height.begin(); @@ -5108,6 +5113,22 @@ void PartPlateList::BedTextureInfo::TexturePart::update_buffer() } } +void PartPlateList::BedTextureInfo::TexturePart::reset() +{ + if (texture) { + texture->reset(); + delete texture; + } + if (buffer) + delete buffer; +} + +void PartPlateList::BedTextureInfo::reset() +{ + for (size_t i = 0; i < parts.size(); i++) + parts[i].reset(); +} + void PartPlateList::init_bed_type_info() { BedTextureInfo::TexturePart pc_part1(10, 130, 10, 110, "bbl_bed_pc_left.svg"); @@ -5119,6 +5140,7 @@ void PartPlateList::init_bed_type_info() BedTextureInfo::TexturePart pte_part1(10, 80, 10, 160, "bbl_bed_pte_left.svg"); BedTextureInfo::TexturePart pte_part2(74, -10, 148, 12, "bbl_bed_pte_bottom.svg"); for (size_t i = 0; i < btCount; i++) { + bed_texture_info[i].reset(); bed_texture_info[i].parts.clear(); } bed_texture_info[btPC].parts.push_back(pc_part1); diff --git a/src/slic3r/GUI/PartPlate.hpp b/src/slic3r/GUI/PartPlate.hpp index 1b28b810757..e2b2a3bf1d0 100644 --- a/src/slic3r/GUI/PartPlate.hpp +++ b/src/slic3r/GUI/PartPlate.hpp @@ -290,7 +290,7 @@ class PartPlate : public ObjectBase ModelInstance* get_instance(int obj_id, int instance_id); Vec3d get_origin() { return m_origin; } - Vec3d estimate_wipe_tower_size(const double w, const double d) const; + Vec3d estimate_wipe_tower_size(const DynamicPrintConfig & config, const double w, const double d, int plate_extruder_size = 0) const; std::vector get_extruders(bool conside_custom_gcode = false) const; std::vector get_extruders_under_cli(bool conside_custom_gcode, DynamicPrintConfig& full_config) const; std::vector get_extruders_without_support(bool conside_custom_gcode = false) const; @@ -597,8 +597,10 @@ class PartPlateList : public ObjectBase } void update_buffer(); + void reset(); }; std::vector parts; + void reset(); }; static const unsigned int MAX_PLATES_COUNT = MAX_PLATE_COUNT; diff --git a/src/slic3r/GUI/Plater.cpp b/src/slic3r/GUI/Plater.cpp index e700b08244f..b6f9e6011ab 100644 --- a/src/slic3r/GUI/Plater.cpp +++ b/src/slic3r/GUI/Plater.cpp @@ -2842,7 +2842,7 @@ wxColour Plater::get_next_color_for_filament() wxString Plater::get_slice_warning_string(GCodeProcessorResult::SliceWarning& warning) { if (warning.msg == BED_TEMP_TOO_HIGH_THAN_FILAMENT) { - return _L("The bed temperature exceeds filament's vitrification temperature. Please open the front door of printer before printing to avoid nozzle clog."); + return _L("The current hot bed temperature is relatively high. The nozzle may be clogged when printing this filament in a closed enclosure. Please open the front door and/or remove the upper glass."); } else if (warning.msg == NOZZLE_HRC_CHECKER) { return _L("The nozzle hardness required by the filament is higher than the default nozzle hardness of the printer. Please replace the hardened nozzle or filament, otherwise, the nozzle will be attrited or damaged."); } else if (warning.msg == NOT_SUPPORT_TRADITIONAL_TIMELAPSE) { @@ -3969,7 +3969,7 @@ wxString Plater::priv::get_export_file(GUI::FileType file_type) { // XXX: Problem on OS X with double extension? output_file.replace_extension("zip.amf"); - dlg_title = _devL("Export AMF file:"); + dlg_title = _L("Export AMF file:"); break; } case FT_3MF: @@ -3981,7 +3981,7 @@ wxString Plater::priv::get_export_file(GUI::FileType file_type) case FT_OBJ: { output_file.replace_extension("obj"); - dlg_title = _devL("Export OBJ file:"); + dlg_title = _L("Export OBJ file:"); break; } default: break; @@ -4248,7 +4248,7 @@ void Plater::priv::mirror(Axis axis) void Plater::find_new_position(const ModelInstancePtrs &instances) { arrangement::ArrangePolygons movable, fixed; - arrangement::ArrangeParams arr_params = get_arrange_params(this); + arrangement::ArrangeParams arr_params = init_arrange_params(this); for (const ModelObject *mo : p->model.objects) for (ModelInstance *inst : mo->instances) { @@ -4770,7 +4770,7 @@ bool Plater::priv::replace_volume_with_stl(int object_idx, int volume_idx, const { const std::string path = new_path.string(); wxBusyCursor wait; - wxBusyInfo info(_devL("Replace from:") + " " + from_u8(path), q->get_current_canvas3D()->get_wxglcanvas()); + wxBusyInfo info(_L("Replace from:") + " " + from_u8(path), q->get_current_canvas3D()->get_wxglcanvas()); Model new_model; try { @@ -4786,7 +4786,7 @@ bool Plater::priv::replace_volume_with_stl(int object_idx, int volume_idx, const } if (new_model.objects.size() > 1 || new_model.objects.front()->volumes.size() > 1) { - MessageDialog dlg(q, _devL("Unable to replace with more than one volume"), _devL("Error during replace"), wxOK | wxOK_DEFAULT | wxICON_WARNING); + MessageDialog dlg(q, _L("Unable to replace with more than one volume"), _L("Error during replace"), wxOK | wxOK_DEFAULT | wxICON_WARNING); dlg.ShowModal(); return false; } @@ -5051,8 +5051,8 @@ void Plater::priv::reload_from_disk() } } else { - wxString message = _devL("Do you want to replace it") + " ?"; - MessageDialog dlg(q, message, wxMessageBoxCaptionStr, wxYES_NO | wxYES_DEFAULT | wxICON_QUESTION); + wxString message = _L("Do you want to replace it") + " ?"; + MessageDialog dlg(q, message, _L("Message"), wxYES_NO | wxYES_DEFAULT | wxICON_QUESTION); if (dlg.ShowModal() == wxID_YES) #if ENABLE_RELOAD_FROM_DISK_REWORK replace_paths.emplace_back(search, sel_filename_path); @@ -5080,7 +5080,7 @@ void Plater::priv::reload_from_disk() const auto& path = input_paths[i].string(); wxBusyCursor wait; - wxBusyInfo info(_devL("Reload from:") + " " + from_u8(path), q->get_current_canvas3D()->get_wxglcanvas()); + wxBusyInfo info(_L("Reload from:") + " " + from_u8(path), q->get_current_canvas3D()->get_wxglcanvas()); Model new_model; try @@ -5291,11 +5291,11 @@ void Plater::priv::reload_from_disk() #endif // ENABLE_RELOAD_FROM_DISK_REWORK if (!fail_list.empty()) { - wxString message = _devL("Unable to reload:") + "\n"; + wxString message = _L("Unable to reload:") + "\n"; for (const wxString& s : fail_list) { message += s + "\n"; } - MessageDialog dlg(q, message, _devL("Error during reload"), wxOK | wxOK_DEFAULT | wxICON_WARNING); + MessageDialog dlg(q, message, _L("Error during reload"), wxOK | wxOK_DEFAULT | wxICON_WARNING); dlg.ShowModal(); } @@ -6311,6 +6311,7 @@ void Plater::priv::on_action_print_all(SimpleEvent&) //BBS if (!m_select_machine_dlg) m_select_machine_dlg = new SelectMachineDialog(q); + m_select_machine_dlg->set_print_type(PrintFromType::FROM_NORMAL); m_select_machine_dlg->prepare(PLATE_ALL_IDX); m_select_machine_dlg->ShowModal(); record_start_print_preset("print_all"); @@ -8116,7 +8117,7 @@ void Plater::import_model_id(wxString download_info) body, http_status, error); - + if (retry_count == max_retries) { msg = _L("Importing to Bambu Studio failed. Please download the file and manually import it."); cont = false; @@ -9990,7 +9991,7 @@ void Plater::export_gcode(bool prefer_removable) fs::path output_path; { std::string ext = default_output_file.extension().string(); - wxFileDialog dlg(this, (printer_technology() == ptFFF) ? _L("Save G-code file as:") : _devL("Save SLA file as:"), + wxFileDialog dlg(this, (printer_technology() == ptFFF) ? _L("Save G-code file as:") : _L("Save SLA file as:"), start_dir, from_path(default_output_file.filename()), GUI::file_wildcards((printer_technology() == ptFFF) ? FT_GCODE : FT_SL1, ext), @@ -9999,8 +10000,8 @@ void Plater::export_gcode(bool prefer_removable) if (dlg.ShowModal() == wxID_OK) { output_path = into_path(dlg.GetPath()); while (has_illegal_filename_characters(output_path.filename().string())) { - show_error(this, _devL("The provided file name is not valid.") + "\n" + - _devL("The following characters are not allowed by a FAT file system:") + " <>:/\\|?*\""); + show_error(this, _L("The provided file name is not valid.") + "\n" + + _L("The following characters are not allowed by a FAT file system:") + " <>:/\\|?*\""); dlg.SetFilename(from_path(output_path.filename())); if (dlg.ShowModal() == wxID_OK) output_path = into_path(dlg.GetPath()); diff --git a/src/slic3r/GUI/Printer/PrinterFileSystem.cpp b/src/slic3r/GUI/Printer/PrinterFileSystem.cpp index e95ae837631..ca7718fabac 100644 --- a/src/slic3r/GUI/Printer/PrinterFileSystem.cpp +++ b/src/slic3r/GUI/Printer/PrinterFileSystem.cpp @@ -91,6 +91,7 @@ void PrinterFileSystem::SetFileType(FileType type, std::string const &storage) m_file_list.swap(m_file_list_cache[{m_file_type, m_file_storage}]); m_lock_start = m_lock_end = 0; BuildGroups(); + UpdateGroupSelect(); SendChangedEvent(EVT_FILE_CHANGED); if (type == F_INVALID_TYPE) return; @@ -515,10 +516,10 @@ void PrinterFileSystem::Stop(bool quit) void PrinterFileSystem::BuildGroups() { - if (m_file_list.empty()) - return; m_group_year.clear(); m_group_month.clear(); + if (m_file_list.empty()) + return; wxDateTime t = wxDateTime((time_t) m_file_list.front().time); m_group_year.push_back(0); m_group_month.push_back(0); diff --git a/src/slic3r/GUI/PrinterWebView.cpp b/src/slic3r/GUI/PrinterWebView.cpp index 96818b169b9..a0e2483dcd9 100644 --- a/src/slic3r/GUI/PrinterWebView.cpp +++ b/src/slic3r/GUI/PrinterWebView.cpp @@ -41,12 +41,14 @@ PrinterWebView::PrinterWebView(wxWindow *parent) topsizer->Add(m_browser, wxSizerFlags().Expand().Proportion(1)); // Log backend information + /* m_browser->GetUserAgent() may lead crash if (wxGetApp().get_mode() == comDevelop) { wxLogMessage(wxWebView::GetBackendVersionInfo().ToString()); wxLogMessage("Backend: %s Version: %s", m_browser->GetClassInfo()->GetClassName(), wxWebView::GetBackendVersionInfo().ToString()); wxLogMessage("User Agent: %s", m_browser->GetUserAgent()); } + */ //Zoom m_zoomFactor = 100; diff --git a/src/slic3r/GUI/ReleaseNote.cpp b/src/slic3r/GUI/ReleaseNote.cpp index a1781f3216f..df1b3d1e10e 100644 --- a/src/slic3r/GUI/ReleaseNote.cpp +++ b/src/slic3r/GUI/ReleaseNote.cpp @@ -26,7 +26,7 @@ namespace Slic3r { namespace GUI { wxDEFINE_EVENT(EVT_SECONDARY_CHECK_CONFIRM, wxCommandEvent); wxDEFINE_EVENT(EVT_SECONDARY_CHECK_CANCEL, wxCommandEvent); -wxDEFINE_EVENT(EVT_SECONDARY_CHECK_FUNC, wxCommandEvent); +wxDEFINE_EVENT(EVT_SECONDARY_CHECK_DONE, wxCommandEvent); wxDEFINE_EVENT(EVT_CHECKBOX_CHANGE, wxCommandEvent); wxDEFINE_EVENT(EVT_ENTER_IP_ADDRESS, wxCommandEvent); wxDEFINE_EVENT(EVT_CLOSE_IPADDRESS_DLG, wxCommandEvent); @@ -531,10 +531,10 @@ SecondaryCheckDialog::SecondaryCheckDialog(wxWindow* parent, wxWindowID id, cons auto bottom_sizer = new wxBoxSizer(wxVERTICAL); auto sizer_button = new wxBoxSizer(wxHORIZONTAL); - StateColor btn_bg_green(std::pair(wxColour(0, 137, 123), StateColor::Pressed), std::pair(wxColour(38, 166, 154), StateColor::Hovered), + btn_bg_green = StateColor(std::pair(wxColour(0, 137, 123), StateColor::Pressed), std::pair(wxColour(38, 166, 154), StateColor::Hovered), std::pair(AMS_CONTROL_BRAND_COLOUR, StateColor::Normal)); - StateColor btn_bg_white(std::pair(wxColour(206, 206, 206), StateColor::Pressed), std::pair(wxColour(238, 238, 238), StateColor::Hovered), + btn_bg_white = StateColor(std::pair(wxColour(206, 206, 206), StateColor::Pressed), std::pair(wxColour(238, 238, 238), StateColor::Hovered), std::pair(*wxWHITE, StateColor::Normal)); @@ -609,7 +609,7 @@ SecondaryCheckDialog::SecondaryCheckDialog(wxWindow* parent, wxWindowID id, cons m_button_fn->SetCornerRadius(FromDIP(12)); m_button_fn->Bind(wxEVT_LEFT_DOWN, [this](wxMouseEvent& e) { - post_event(wxCommandEvent(EVT_SECONDARY_CHECK_FUNC)); + post_event(wxCommandEvent(EVT_SECONDARY_CHECK_DONE)); e.Skip(); }); @@ -617,14 +617,20 @@ SecondaryCheckDialog::SecondaryCheckDialog(wxWindow* parent, wxWindowID id, cons m_button_cancel->Show(); m_button_fn->Hide(); m_button_retry->Hide(); - } else if (btn_style == CONFIRM_AND_FUNC) { + } else if (btn_style == CONFIRM_AND_DONE) { m_button_cancel->Hide(); m_button_fn->Show(); m_button_retry->Hide(); } else if (btn_style == CONFIRM_AND_RETRY) { m_button_retry->Show(); m_button_cancel->Hide(); - } else { + m_button_fn->Hide(); + } else if (style == DONE_AND_RETRY) { + m_button_retry->Show(); + m_button_fn->Show(); + m_button_cancel->Hide(); + } + else { m_button_retry->Hide(); m_button_cancel->Hide(); m_button_fn->Hide(); @@ -734,7 +740,7 @@ void SecondaryCheckDialog::update_title_style(wxString title, SecondaryCheckDial m_button_fn->Hide(); m_button_retry->Hide(); } - else if (style == CONFIRM_AND_FUNC) { + else if (style == CONFIRM_AND_DONE) { m_button_cancel->Hide(); m_button_fn->Show(); m_button_retry->Hide(); @@ -742,6 +748,12 @@ void SecondaryCheckDialog::update_title_style(wxString title, SecondaryCheckDial else if (style == CONFIRM_AND_RETRY) { m_button_retry->Show(); m_button_cancel->Hide(); + m_button_fn->Hide(); + } + else if (style == DONE_AND_RETRY) { + m_button_retry->Show(); + m_button_fn->Show(); + m_button_cancel->Hide(); } else { m_button_retry->Hide(); @@ -753,12 +765,6 @@ void SecondaryCheckDialog::update_title_style(wxString title, SecondaryCheckDial Layout(); } -void SecondaryCheckDialog::update_func_btn(wxString func_btn_text) -{ - m_button_fn->SetLabel(func_btn_text); - rescale(); -} - void SecondaryCheckDialog::update_btn_label(wxString ok_btn_text, wxString cancel_btn_text) { m_button_ok->SetLabel(ok_btn_text); diff --git a/src/slic3r/GUI/ReleaseNote.hpp b/src/slic3r/GUI/ReleaseNote.hpp index ec4dda50891..f6c9e27bd1b 100644 --- a/src/slic3r/GUI/ReleaseNote.hpp +++ b/src/slic3r/GUI/ReleaseNote.hpp @@ -40,7 +40,7 @@ namespace Slic3r { namespace GUI { wxDECLARE_EVENT(EVT_SECONDARY_CHECK_CONFIRM, wxCommandEvent); wxDECLARE_EVENT(EVT_SECONDARY_CHECK_CANCEL, wxCommandEvent); -wxDECLARE_EVENT(EVT_SECONDARY_CHECK_FUNC, wxCommandEvent); +wxDECLARE_EVENT(EVT_SECONDARY_CHECK_DONE, wxCommandEvent); wxDECLARE_EVENT(EVT_SECONDARY_CHECK_RETRY, wxCommandEvent); class ReleaseNoteDialog : public DPIDialog @@ -107,9 +107,10 @@ class SecondaryCheckDialog : public DPIFrame enum ButtonStyle { ONLY_CONFIRM = 0, CONFIRM_AND_CANCEL = 1, - CONFIRM_AND_FUNC = 2, + CONFIRM_AND_DONE = 2, CONFIRM_AND_RETRY = 3, - MAX_STYLE_NUM = 4 + DONE_AND_RETRY = 4, + MAX_STYLE_NUM = 5 }; SecondaryCheckDialog( wxWindow* parent, @@ -126,13 +127,15 @@ class SecondaryCheckDialog : public DPIFrame void on_hide(); void update_btn_label(wxString ok_btn_text, wxString cancel_btn_text); void update_title_style(wxString title, SecondaryCheckDialog::ButtonStyle style, wxWindow* parent = nullptr); - void update_func_btn(wxString func_btn_text); void post_event(wxCommandEvent&& event); void rescale(); ~SecondaryCheckDialog(); void on_dpi_changed(const wxRect& suggested_rect); void msw_rescale(); + + StateColor btn_bg_green; + StateColor btn_bg_white; Label* m_staticText_release_note {nullptr}; wxBoxSizer* m_sizer_main; wxScrolledWindow *m_vebview_release_note {nullptr}; diff --git a/src/slic3r/GUI/SelectMachine.cpp b/src/slic3r/GUI/SelectMachine.cpp index 59cecca2823..5593515d54f 100644 --- a/src/slic3r/GUI/SelectMachine.cpp +++ b/src/slic3r/GUI/SelectMachine.cpp @@ -1918,10 +1918,10 @@ void SelectMachineDialog::update_ams_status_msg(wxString msg, bool is_warning) } else { msg = format_text(msg); - auto str_new = msg.ToStdString(); + auto str_new = msg.utf8_string(); stripWhiteSpace(str_new); - auto str_old = m_statictext_ams_msg->GetLabel().ToStdString(); + auto str_old = m_statictext_ams_msg->GetLabel().utf8_string(); stripWhiteSpace(str_old); if (str_new != str_old) { @@ -1953,10 +1953,10 @@ void SelectMachineDialog::update_priner_status_msg(wxString msg, bool is_warning } else { msg = format_text(msg); - auto str_new = msg.ToStdString(); + auto str_new = msg.utf8_string(); stripWhiteSpace(str_new); - auto str_old = m_statictext_printer_msg->GetLabel().ToStdString(); + auto str_old = m_statictext_printer_msg->GetLabel().utf8_string(); stripWhiteSpace(str_old); if (str_new != str_old) { @@ -2286,9 +2286,9 @@ void SelectMachineDialog::on_ok_btn(wxCommandEvent &event) for (auto warning : plate->get_slice_result()->warnings) { if (warning.msg == BED_TEMP_TOO_HIGH_THAN_FILAMENT) { - if ((obj_->get_printer_series() == PrinterSeries::SERIES_X1)) { - confirm_text.push_back(Plater::get_slice_warning_string(warning) + "\n"); - has_slice_warnings = true; + if (obj_->is_printer_enclosed()) { + //confirm_text.push_back(Plater::get_slice_warning_string(warning) + "\n"); + //has_slice_warnings = true; } } else if (warning.msg == NOT_SUPPORT_TRADITIONAL_TIMELAPSE) { @@ -3046,6 +3046,8 @@ void SelectMachineDialog::on_selection_changed(wxCommandEvent &event) //reset print status + update_flow_cali_check(obj); + show_status(PrintDialogStatus::PrintStatusInit); reset_ams_material(); @@ -3053,6 +3055,21 @@ void SelectMachineDialog::on_selection_changed(wxCommandEvent &event) update_show_status(); } +void SelectMachineDialog::update_flow_cali_check(MachineObject* obj) +{ + auto bed_type = m_plater->get_partplate_list().get_curr_plate()->get_bed_type(true); + auto show_cali_tips = true; + + if (obj && obj->printer_type == "N1") { show_cali_tips = false; } + + if (bed_type == BedType::btPTE) { + set_flow_calibration_state(false, show_cali_tips); + } + else { + set_flow_calibration_state(true, show_cali_tips); + } +} + void SelectMachineDialog::update_ams_check(MachineObject* obj) { if (obj && obj->is_function_supported(FUNC_USE_AMS) @@ -3442,18 +3459,17 @@ wxImage *SelectMachineDialog::LoadImageFromBlob(const unsigned char *data, int s return NULL; } -void SelectMachineDialog::set_flow_calibration_state(bool state) +void SelectMachineDialog::set_flow_calibration_state(bool state, bool show_tips) { if (!state) { m_checkbox_list["flow_cali"]->SetValue(state); auto tool_tip = _L("Caution to use! Flow calibration on Textured PEI Plate may fail due to the scattered surface."); m_checkbox_list["flow_cali"]->SetToolTip(tool_tip); m_checkbox_list["flow_cali"]->Enable(); - //m_checkbox_state_list["flow_cali"] = state; for (auto win : select_flow->GetWindowChildren()) { win->SetToolTip(tool_tip); } - select_flow->SetToolTip(tool_tip); + //select_flow->SetToolTip(tool_tip); } else { @@ -3466,11 +3482,16 @@ void SelectMachineDialog::set_flow_calibration_state(bool state) } m_checkbox_list["flow_cali"]->Enable(); - //m_checkbox_state_list["flow_cali"] = state; for (auto win : select_flow->GetWindowChildren()) { win->SetToolTip( _L("Automatic flow calibration using Micro Lidar")); } } + + if (!show_tips) { + for (auto win : select_flow->GetWindowChildren()) { + win->SetToolTip(wxEmptyString); + } + } } void SelectMachineDialog::set_default() @@ -3648,6 +3669,11 @@ void SelectMachineDialog::set_default_normal() item->Bind(wxEVT_LEFT_UP, [this, item, materials, extruder](wxMouseEvent& e) {}); item->Bind(wxEVT_LEFT_DOWN, [this, item, materials, extruder](wxMouseEvent& e) { + + DeviceManager* dev_manager = Slic3r::GUI::wxGetApp().getDeviceManager(); + if (!dev_manager) return; + MachineObject* curr_obj = dev_manager->get_selected_machine(); + MaterialHash::iterator iter = m_materialList.begin(); while (iter != m_materialList.end()) { int id = iter->first; @@ -3664,29 +3690,25 @@ void SelectMachineDialog::set_default_normal() auto mouse_pos = ClientToScreen(e.GetPosition()); wxPoint rect = item->ClientToScreen(wxPoint(0, 0)); // update ams data - DeviceManager* dev_manager = Slic3r::GUI::wxGetApp().getDeviceManager(); - if (!dev_manager) return; - MachineObject* obj_ = dev_manager->get_selected_machine(); - - if (obj_ && obj_->is_support_ams_mapping()) { + + if (curr_obj && curr_obj->is_support_ams_mapping()) { if (m_mapping_popup.IsShown()) return; wxPoint pos = item->ClientToScreen(wxPoint(0, 0)); pos.y += item->GetRect().height; m_mapping_popup.Move(pos); - if (obj_ && - obj_->has_ams() && + if (curr_obj->has_ams() && m_checkbox_list["use_ams"]->GetValue() && - obj_->dev_id == m_printer_last_select) + curr_obj->dev_id == m_printer_last_select) { m_mapping_popup.set_parent_item(item); m_mapping_popup.set_current_filament_id(extruder); m_mapping_popup.set_tag_texture(materials[extruder]); - m_mapping_popup.update_ams_data(obj_->amsList); + m_mapping_popup.update_ams_data(curr_obj->amsList); m_mapping_popup.Popup(); } } - }); + }); Material* material_item = new Material(); material_item->id = extruder; @@ -3719,13 +3741,10 @@ void SelectMachineDialog::set_default_normal() m_scrollable_view->SetMaxSize(m_scrollable_region->GetSize()); //disable pei bed - auto bed_type = m_plater->get_partplate_list().get_curr_plate()->get_bed_type(true); - if (bed_type == BedType::btPTE) { - set_flow_calibration_state(false); - } - else { - set_flow_calibration_state(true); - } + DeviceManager* dev_manager = Slic3r::GUI::wxGetApp().getDeviceManager(); + if (!dev_manager) return; + MachineObject* obj_ = dev_manager->get_selected_machine(); + update_flow_cali_check(obj_); wxSize screenSize = wxGetDisplaySize(); auto dialogSize = this->GetSize(); diff --git a/src/slic3r/GUI/SelectMachine.hpp b/src/slic3r/GUI/SelectMachine.hpp index 168092fb662..ba3d8611b24 100644 --- a/src/slic3r/GUI/SelectMachine.hpp +++ b/src/slic3r/GUI/SelectMachine.hpp @@ -432,6 +432,7 @@ class SelectMachineDialog : public DPIDialog void update_page_turn_state(bool show); void on_timer(wxTimerEvent& event); void on_selection_changed(wxCommandEvent& event); + void update_flow_cali_check(MachineObject* obj); void Enable_Refresh_Button(bool en); void Enable_Send_Button(bool en); void on_dpi_changed(const wxRect& suggested_rect) override; @@ -442,7 +443,7 @@ class SelectMachineDialog : public DPIDialog void update_priner_status_msg(wxString msg, bool is_warning = false); void update_print_status_msg(wxString msg, bool is_warning = false, bool is_printer = true); void update_print_error_info(int code, std::string msg, std::string extra); - void set_flow_calibration_state(bool state); + void set_flow_calibration_state(bool state, bool show_tips = true); bool is_show_timelapse(); bool has_timelapse_warning(); void update_timelapse_enable_status(); diff --git a/src/slic3r/GUI/StatusPanel.cpp b/src/slic3r/GUI/StatusPanel.cpp index 916194443d8..e1398616152 100644 --- a/src/slic3r/GUI/StatusPanel.cpp +++ b/src/slic3r/GUI/StatusPanel.cpp @@ -447,6 +447,30 @@ void PrintingTaskPanel::create_panel(wxWindow* parent) m_score_staticline->Hide(); sizer->Add(0, 0, 0, wxTOP, FromDIP(15)); sizer->Add(m_score_staticline, 0, wxEXPAND | wxALL, FromDIP(10)); + m_request_failed_panel = new wxPanel(parent, wxID_ANY); + m_request_failed_panel->SetBackgroundColour(*wxWHITE); + wxBoxSizer *static_request_failed_panel_sizer = new wxBoxSizer(wxHORIZONTAL); + m_request_failed_info = new wxStaticText(m_request_failed_panel, wxID_ANY, _L("You have completed printing the mall model, \nbut the synchronization of rating information has failed."), wxDefaultPosition, wxDefaultSize, 0); + m_request_failed_info->Wrap(-1); + m_request_failed_info->SetForegroundColour(*wxRED); + m_request_failed_info->SetFont(::Label::Body_10); + static_request_failed_panel_sizer->Add(m_request_failed_info, 0, wxEXPAND | wxALL, FromDIP(10)); + StateColor btn_bg_green(std::pair(AMS_CONTROL_DISABLE_COLOUR, StateColor::Disabled), std::pair(wxColour(27, 136, 68), StateColor::Pressed), + std::pair(wxColour(61, 203, 115), StateColor::Hovered), std::pair(AMS_CONTROL_BRAND_COLOUR, StateColor::Normal)); + StateColor btn_bd_green(std::pair(AMS_CONTROL_WHITE_COLOUR, StateColor::Disabled), std::pair(AMS_CONTROL_BRAND_COLOUR, StateColor::Enabled)); + m_button_market_retry = new Button(m_request_failed_panel, _L("Retry")); + m_button_market_retry->SetBackgroundColor(btn_bg_green); + m_button_market_retry->SetBorderColor(btn_bd_green); + m_button_market_retry->SetTextColor(wxColour("#FFFFFE")); + m_button_market_retry->SetSize(wxSize(FromDIP(128), FromDIP(26))); + m_button_market_retry->SetMinSize(wxSize(-1, FromDIP(26))); + m_button_market_retry->SetCornerRadius(FromDIP(13)); + static_request_failed_panel_sizer->Add(0, 0, 1, wxEXPAND, 0); + static_request_failed_panel_sizer->Add(m_button_market_retry, 0, wxEXPAND | wxALL, FromDIP(10)); + m_request_failed_panel->SetSizer(static_request_failed_panel_sizer); + m_request_failed_panel->Hide(); + sizer->Add(m_request_failed_panel, 0, wxEXPAND | wxALL, FromDIP(10)); + m_score_subtask_info = new wxPanel(parent, wxID_ANY); m_score_subtask_info->SetBackgroundColour(*wxWHITE); @@ -486,10 +510,6 @@ void PrintingTaskPanel::create_panel(wxWindow* parent) static_score_star_sizer->Add(m_score_star[i], 0, wxEXPAND | wxLEFT, FromDIP(10)); } - StateColor btn_bg_green(std::pair(AMS_CONTROL_DISABLE_COLOUR, StateColor::Disabled), std::pair(wxColour(27, 136, 68), StateColor::Pressed), - std::pair(wxColour(61, 203, 115), StateColor::Hovered), std::pair(AMS_CONTROL_BRAND_COLOUR, StateColor::Normal)); - StateColor btn_bd_green(std::pair(AMS_CONTROL_WHITE_COLOUR, StateColor::Disabled), std::pair(AMS_CONTROL_BRAND_COLOUR, StateColor::Enabled)); - m_button_market_scoring = new Button(m_score_subtask_info, _L("Rate")); m_button_market_scoring->SetBackgroundColor(btn_bg_green); m_button_market_scoring->SetBorderColor(btn_bd_green); @@ -1625,6 +1645,7 @@ StatusPanel::StatusPanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, co m_project_task_panel->get_pause_resume_button()->Connect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_subtask_pause_resume), NULL, this); m_project_task_panel->get_abort_button()->Connect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_subtask_abort), NULL, this); m_project_task_panel->get_market_scoring_button()->Connect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_market_scoring), NULL, this); + m_project_task_panel->get_market_retry_buttom()->Connect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_market_retry), NULL, this); m_project_task_panel->get_clean_button()->Connect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_print_error_clean), NULL, this); m_setting_button->Connect(wxEVT_LEFT_DOWN, wxMouseEventHandler(StatusPanel::on_camera_enter), NULL, this); @@ -1659,7 +1680,7 @@ StatusPanel::StatusPanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, co Bind(EVT_AMS_GUIDE_WIKI, &StatusPanel::on_ams_guide, this); Bind(EVT_AMS_RETRY, &StatusPanel::on_ams_retry, this); Bind(EVT_FAN_CHANGED, &StatusPanel::on_fan_changed, this); - Bind(EVT_SECONDARY_CHECK_FUNC, &StatusPanel::on_print_error_func, this); + Bind(EVT_SECONDARY_CHECK_DONE, &StatusPanel::on_print_error_done, this); m_switch_speed->Connect(wxEVT_LEFT_DOWN, wxCommandEventHandler(StatusPanel::on_switch_speed), NULL, this); m_calibration_btn->Connect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_start_calibration), NULL, this); @@ -1673,6 +1694,7 @@ StatusPanel::~StatusPanel() m_project_task_panel->get_pause_resume_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_subtask_pause_resume), NULL, this); m_project_task_panel->get_abort_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_subtask_abort), NULL, this); m_project_task_panel->get_market_scoring_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_market_scoring), NULL, this); + m_project_task_panel->get_market_retry_buttom()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_market_retry), NULL, this); m_project_task_panel->get_clean_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_print_error_clean), NULL, this); m_setting_button->Disconnect(wxEVT_LEFT_DOWN, wxMouseEventHandler(StatusPanel::on_camera_enter), NULL, this); @@ -1735,16 +1757,19 @@ void StatusPanel::init_scaled_buttons() } void StatusPanel::on_market_scoring(wxCommandEvent &event) { - if (obj && obj->get_modeltask() && obj->get_modeltask()->design_id > 0 && m_rating_result.contains("id")) { // model is mall model and has rating_id - - if (m_score_data && m_score_data->rating_id == m_rating_result["id"].get()) { // current score data for model is same as mall model + if (obj && obj->is_makeworld_subtask() && obj->rating_info && obj->rating_info->request_successful) { // model is mall model and has rating_id + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": on_market_scoring" ; + if (m_score_data && m_score_data->rating_id == obj->rating_info->rating_id) { // current score data for model is same as mall model + if (m_score_data->star_count != m_project_task_panel->get_star_count()) m_score_data->star_count = m_project_task_panel->get_star_count(); ScoreDialog m_score_dlg(this, m_score_data); int ret = m_score_dlg.ShowModal(); - + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": old data"; + if (ret == wxID_OK) { + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": old data is upload"; m_score_data->rating_id = -1; m_project_task_panel->set_star_count_dirty(false); - m_print_finish = false; + if (obj) obj->get_model_mall_result_need_retry = true; return; } if (m_score_data != nullptr) { @@ -1754,35 +1779,26 @@ void StatusPanel::on_market_scoring(wxCommandEvent &event) { m_score_data = new ScoreData(m_score_dlg.get_score_data()); // when user do not submit score, store the data for next opening the score dialog m_project_task_panel->set_star_count(m_score_data->star_count); } else { - //to do: if user has rated the model, show the comment on the dialog - int star_count = 0; - if (m_rating_result.contains("content")) - star_count = m_project_task_panel->get_star_count_dirty() ? m_project_task_panel->get_star_count() : m_rating_result["score"].get(); - bool success_print = true; - if (m_rating_result.contains("successPrinted")) - success_print = m_rating_result["successPrinted"].get(); - ScoreDialog m_score_dlg(this, obj->get_modeltask()->design_id, obj->get_modeltask()->model_id, obj->get_modeltask()->profile_id, - m_rating_result["id"].get(), success_print, star_count); - - if (m_rating_result.contains("content")) { - std::string comment = m_rating_result["content"].get(); - if (!comment.empty()) { - m_score_dlg.set_comment(comment); - } - } + int star_count = m_project_task_panel->get_star_count_dirty() ? m_project_task_panel->get_star_count() : obj->rating_info->start_count; + bool success_print = obj->rating_info->success_printed; + ScoreDialog m_score_dlg(this, obj->get_modeltask()->design_id, obj->get_modeltask()->model_id, obj->get_modeltask()->profile_id, obj->rating_info->rating_id, + success_print, star_count); + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": new data"; + + std::string comment = obj->rating_info->content; + if (!comment.empty()) { m_score_dlg.set_comment(comment); } - if (m_rating_result.contains("images")) { - std::vector images_json_array; - images_json_array = m_rating_result["images"].get>(); - m_score_dlg.set_cloud_bitmap(images_json_array); - } + std::vector images_json_array; + images_json_array = obj->rating_info->image_url_paths; + if (!images_json_array.empty()) m_score_dlg.set_cloud_bitmap(images_json_array); int ret = m_score_dlg.ShowModal(); if (ret == wxID_OK) { + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": new data is upload"; m_score_data->rating_id = -1; m_project_task_panel->set_star_count_dirty(false); - m_print_finish = false; + if (obj) obj->get_model_mall_result_need_retry = true; return; } if (m_score_data != nullptr) { @@ -1792,8 +1808,15 @@ void StatusPanel::on_market_scoring(wxCommandEvent &event) { m_score_data = new ScoreData(m_score_dlg.get_score_data()); m_project_task_panel->set_star_count(m_score_data->star_count); } - - + } +} + +void StatusPanel::on_market_retry(wxCommandEvent &event) +{ + if (obj) { + obj->get_model_mall_result_need_retry = true; + } else { + BOOST_LOG_TRIVIAL(info)<< __FUNCTION__ << "retury failed"; } } @@ -1898,6 +1921,7 @@ bool StatusPanel::is_task_changed(MachineObject* obj) last_profile_id = obj->profile_id_; last_task_id = obj->task_id_; request_model_info_flag = false; + m_project_task_panel->set_star_count_dirty(false); return true; } return false; @@ -2026,9 +2050,12 @@ void StatusPanel::show_error_message(MachineObject* obj, wxString msg, std::stri if (m_print_error_dlg == nullptr) { m_print_error_dlg = new SecondaryCheckDialog(this->GetParent(), wxID_ANY, _L("Warning"), SecondaryCheckDialog::ButtonStyle::ONLY_CONFIRM); } - if (it_done != message_containing_done.end()) { - m_print_error_dlg->update_func_btn(_L("Done")); - m_print_error_dlg->update_title_style(_L("Warning"), SecondaryCheckDialog::ButtonStyle::CONFIRM_AND_FUNC, this); + + if (it_done != message_containing_done.end() && it_retry != message_containing_retry.end()) { + m_print_error_dlg->update_title_style(_L("Warning"), SecondaryCheckDialog::ButtonStyle::DONE_AND_RETRY, this); + } + else if (it_done != message_containing_done.end()) { + m_print_error_dlg->update_title_style(_L("Warning"), SecondaryCheckDialog::ButtonStyle::CONFIRM_AND_DONE, this); } else if (it_retry != message_containing_retry.end()) { m_print_error_dlg->update_title_style(_L("Warning"), SecondaryCheckDialog::ButtonStyle::CONFIRM_AND_RETRY, this); @@ -2411,13 +2438,7 @@ void StatusPanel::update_ams(MachineObject *obj) m_ams_control->SetAmsModel(ams_mode, ams_mode); show_ams_group(true); - - if (!is_support_filament_backup || !obj->ams_support_auto_switch_filament_flag) { - m_ams_control->show_auto_refill(false); - } - else { - m_ams_control->show_auto_refill(true); - } + m_ams_control->show_auto_refill(true); } @@ -2732,7 +2753,6 @@ void StatusPanel::update_model_info() if (wxGetApp().getAgent() && obj) { - BBLSubTask* curr_task = obj->get_subtask(); if (curr_task) { BBLModelTask* curr_model_task = obj->get_modeltask(); @@ -2767,6 +2787,7 @@ void StatusPanel::update_subtask(MachineObject *obj) } else if (obj->is_in_printing() || obj->print_status == "FINISH") { if (obj->is_in_prepare() || obj->print_status == "SLICING") { m_project_task_panel->market_scoring_hide(); + m_project_task_panel->get_request_failed_panel()->Hide(); m_project_task_panel->enable_abort_button(false); m_project_task_panel->enable_pause_resume_button(false, "pause_disable"); wxString prepare_text; @@ -2801,78 +2822,56 @@ void StatusPanel::update_subtask(MachineObject *obj) else { m_project_task_panel->show_profile_info(false); } - update_basic_print_data(false); } else { if (obj->can_resume()) { m_project_task_panel->enable_pause_resume_button(true, "resume"); - } else { m_project_task_panel->enable_pause_resume_button(true, "pause"); } - if (obj->print_status == "FINISH") { - + if (obj->is_printing_finished()) { + obj->update_model_task(); m_project_task_panel->enable_abort_button(false); m_project_task_panel->enable_pause_resume_button(false, "resume_disable"); - if (wxGetApp().has_model_mall()) { - //determine whether the model is mall model - bool is_market_task = obj->get_modeltask() && obj->get_modeltask()->design_id > 0; - if (is_market_task) { - NetworkAgent *agent = wxGetApp().getAgent(); - if (agent && IsShownOnScreen() && !m_print_finish) { - - int job_id = obj->get_modeltask()->job_id; - boost::thread([this, agent, job_id] { - try { - std::string rating_result; - unsigned int http_code = 0; - std::string http_error; - int rating_id = -1; - int res = agent->get_model_mall_rating_result(job_id, rating_result, http_code, http_error); - if (0 == res) { - m_rating_result = json::parse(rating_result); - if (m_rating_result.contains("id")) { - rating_id = m_rating_result["id"].get(); - m_project_task_panel->market_scoring_show(); - BOOST_LOG_TRIVIAL(info) << "show scoring page"; - bool is_update = model_score_is_update(); - // this mall model has score, user do not click star, Initialize scores only once per print startup program - if (is_update || - (!m_project_task_panel->get_star_count_dirty() && !m_print_finish && IsShownOnScreen() && m_rating_result.contains("score"))) { - int star_count = m_rating_result["score"].get(); - m_project_task_panel->set_star_count(star_count); - BOOST_LOG_TRIVIAL(info) << "Initialize scores"; - m_project_task_panel->set_star_count_dirty(true); - m_print_finish = true; - if (0 != star_count) { - m_project_task_panel->get_market_scoring_button()->Enable(true); - m_project_task_panel->set_has_reted_text(true); - } else { - m_project_task_panel->set_has_reted_text(false); - } - } - } - } - } catch (...) { - m_project_task_panel->market_scoring_hide(); - BOOST_LOG_TRIVIAL(info) << "get mall model rating id failed and hide scoring page"; - } - }); + // is makeworld subtask + if (wxGetApp().has_model_mall() && obj->is_makeworld_subtask()) { + // has model mall rating result + if (obj && obj->rating_info && obj->rating_info->request_successful) { + m_project_task_panel->get_request_failed_panel()->Hide(); + BOOST_LOG_TRIVIAL(info) << "model mall result request successful"; + // has start count + if (!m_project_task_panel->get_star_count_dirty()) { + if (obj->rating_info->start_count > 0) { + m_project_task_panel->set_star_count(obj->rating_info->start_count); + m_project_task_panel->set_star_count_dirty(true); + BOOST_LOG_TRIVIAL(info) << "Initialize scores"; + m_project_task_panel->get_market_scoring_button()->Enable(true); + m_project_task_panel->set_has_reted_text(true); + } else { + m_project_task_panel->set_star_count(0); + m_project_task_panel->set_star_count_dirty(false); + m_project_task_panel->get_market_scoring_button()->Enable(false); + m_project_task_panel->set_has_reted_text(false); + } + } + m_project_task_panel->market_scoring_show(); + } else if (obj && obj->rating_info && !obj->rating_info->request_successful) { + BOOST_LOG_TRIVIAL(info) << "model mall result request failed"; + if (403 != obj->rating_info->http_code) { + BOOST_LOG_TRIVIAL(info) << "Request need retry"; + m_project_task_panel->get_market_retry_buttom()->Enable(!obj->get_model_mall_result_need_retry); + m_project_task_panel->get_request_failed_panel()->Show(); + } else { + BOOST_LOG_TRIVIAL(info) << "Request rejected"; } - BOOST_LOG_TRIVIAL(info) << "SHOW_SCORE_BTU: design_id [" << obj->get_modeltask()->design_id << "] print_finish [" << m_print_finish << "]"; - - } else { // model is not mall model. hide scoring page - m_project_task_panel->market_scoring_hide(); } - } else { // have no model mall, hide scoring page + } else { m_project_task_panel->market_scoring_hide(); } } else { // model printing is not finished, hide scoring page m_project_task_panel->enable_abort_button(true); m_project_task_panel->market_scoring_hide(); - if (m_print_finish) { - m_print_finish = false; - } + m_project_task_panel->get_request_failed_panel()->Hide(); } // update printing stage @@ -2913,21 +2912,6 @@ void StatusPanel::update_subtask(MachineObject *obj) this->Layout(); } -bool StatusPanel::model_score_is_update() -{ - try { - if (m_last_result["id"] != m_rating_result["id"] || m_last_result["content"] != m_rating_result["content"] || m_last_result["images"] != m_rating_result["images"]) { - m_last_result = m_rating_result; - return true; - } - } catch (...) { - BOOST_LOG_TRIVIAL(info) << "m_last_result first initial"; - m_last_result = m_rating_result; - } - - return false; -} - void StatusPanel::update_cloud_subtask(MachineObject *obj) { if (!obj) return; @@ -2990,6 +2974,7 @@ void StatusPanel::reset_printing_values() m_project_task_panel->market_scoring_hide(); + m_project_task_panel->get_request_failed_panel()->Hide(); update_basic_print_data(false); m_project_task_panel->update_left_time(NA_STR); m_project_task_panel->update_layers_num(true, wxString::Format(_L("Layer: %s"), NA_STR)); @@ -3558,9 +3543,9 @@ void StatusPanel::on_ams_retry(wxCommandEvent& event) } } -void StatusPanel::on_print_error_func(wxCommandEvent& event) +void StatusPanel::on_print_error_done(wxCommandEvent& event) { - BOOST_LOG_TRIVIAL(info) << "on_print_error_func"; + BOOST_LOG_TRIVIAL(info) << "on_print_error_done"; if (obj) { obj->command_ams_control("done"); if (m_print_error_dlg) { @@ -3928,10 +3913,6 @@ void StatusPanel::show_status(int status) } } -void StatusPanel::set_print_finish_status(bool is_finish) { - m_print_finish = is_finish; -} - void StatusPanel::set_hold_count(int& count) { if (obj) { @@ -4172,7 +4153,7 @@ std::pair ScoreDialog::create_local_thu bitmap_to_image_msg.first = imageCtrl; bitmap_to_image_msg.second = cur_image_msg; - + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": local picture is download"; return bitmap_to_image_msg; } @@ -4215,7 +4196,7 @@ std::pair ScoreDialog::create_oss_thumb bitmap_to_image_msg.first = imageCtrl; bitmap_to_image_msg.second = cur_image_msg; - + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": oss picture is download"; return bitmap_to_image_msg; } @@ -4386,7 +4367,7 @@ wxBoxSizer *ScoreDialog::get_photo_btn_sizer() { m_add_photo->Bind(wxEVT_LEFT_DOWN, [this](auto &e) { // add photo logic - wxFileDialog openFileDialog(this, "Select Images", "", "", "Image files (*.png;*.jpg)|*.png;*.jpg", wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_MULTIPLE); + wxFileDialog openFileDialog(this, "Select Images", "", "", "Image files (*.png;*.jpg;*jpeg)|*.png;*.jpg;*.jpeg", wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_MULTIPLE); if (openFileDialog.ShowModal() == wxID_CANCEL) return; @@ -4471,6 +4452,7 @@ wxBoxSizer *ScoreDialog::get_button_sizer() } std::set> need_upload_images = add_need_upload_imgs(); + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": get need upload picture count: " << need_upload_images.size(); std::string comment = into_u8(m_comment_text->GetValue()); unsigned int http_code; @@ -4482,6 +4464,7 @@ wxBoxSizer *ScoreDialog::get_button_sizer() int ret = wxGetApp().getAgent()->get_oss_config(config, wxGetApp().app_config->get_country_code(), http_code, http_error); if (ret == -1) { error_info += into_u8(_L("Get oss config failed.")) + "\n\thttp code: " + std::to_string(http_code) + "\n\thttp error: " + http_error; + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": get oss config filed and http_error: " << http_error; m_upload_status_code = StatusCode::UPLOAD_EXIST_ISSUE; } if (m_upload_status_code == StatusCode::UPLOAD_PROGRESS) { @@ -4569,6 +4552,7 @@ wxBoxSizer *ScoreDialog::get_button_sizer() _L("Your comment result cannot be uploaded due to some reasons. As follows:\n\n error code: ") + std::to_string(http_code) + "\n " + _L("error message: ") + http_error + _L("\n\nWould you like to redirect to the webpage for rating?"), wxString(_L("info")), wxOK | wxNO | wxCENTER); + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": upload rating picture failed and http error" << http_error; if (dlg_info->ShowModal() == wxID_OK) { market_model_scoring_page(m_design_id); EndModal(wxID_OK); @@ -4579,6 +4563,7 @@ wxBoxSizer *ScoreDialog::get_button_sizer() } else if (m_upload_status_code == StatusCode::UPLOAD_IMG_FAILED) { MessageDialog *dlg_info = new MessageDialog(this, _L("Some of your images failed to upload. Would you like to redirect to the webpage for rating?"), wxString(_L("info")), wxOK | wxNO | wxCENTER); + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": upload rating picture failed or get oss config failed"; if (dlg_info->ShowModal() == wxID_OK) { market_model_scoring_page(m_design_id); EndModal(wxID_OK); diff --git a/src/slic3r/GUI/StatusPanel.hpp b/src/slic3r/GUI/StatusPanel.hpp index 6b7d4eef709..adbaa8010ee 100644 --- a/src/slic3r/GUI/StatusPanel.hpp +++ b/src/slic3r/GUI/StatusPanel.hpp @@ -182,6 +182,7 @@ class PrintingTaskPanel : public wxPanel wxStaticText * m_staticText_progress_end; wxStaticText* m_staticText_layers; wxStaticText * m_has_rated_prompt; + wxStaticText * m_request_failed_info; wxStaticBitmap* m_bitmap_thumbnail; wxStaticBitmap* m_bitmap_static_use_time; wxStaticBitmap* m_bitmap_static_use_weight; @@ -189,8 +190,10 @@ class PrintingTaskPanel : public wxPanel ScalableButton* m_button_abort; Button* m_button_market_scoring; Button* m_button_clean; + Button * m_button_market_retry; wxPanel * m_score_subtask_info; wxPanel * m_score_staticline; + wxPanel * m_request_failed_panel; // score page int m_star_count; std::vector m_score_star; @@ -226,8 +229,10 @@ class PrintingTaskPanel : public wxPanel ScalableButton* get_abort_button() {return m_button_abort;}; ScalableButton* get_pause_resume_button() {return m_button_pause_resume;}; Button* get_market_scoring_button() {return m_button_market_scoring;}; + Button * get_market_retry_buttom() { return m_button_market_retry; }; Button* get_clean_button() {return m_button_clean;}; wxStaticBitmap* get_bitmap_thumbnail() {return m_bitmap_thumbnail;}; + wxPanel * get_request_failed_panel() { return m_request_failed_panel; } int get_star_count() { return m_star_count; } void set_star_count(int star_count); std::vector &get_score_star() { return m_score_star; } @@ -465,10 +470,9 @@ class StatusPanel : public StatusBasePanel int m_last_timelapse = -1; int m_last_extrusion = -1; int m_last_vcamera = -1; + int m_model_mall_request_count = 0; bool m_is_load_with_temp = false; - bool m_print_finish = false; json m_rating_result; - json m_last_result; wxWebRequest web_request; bool bed_temp_input = false; @@ -492,6 +496,7 @@ class StatusPanel : public StatusBasePanel void update_tasklist_info(); void on_market_scoring(wxCommandEvent &event); + void on_market_retry(wxCommandEvent &event); void on_subtask_pause_resume(wxCommandEvent &event); void on_subtask_abort(wxCommandEvent &event); void on_print_error_clean(wxCommandEvent &event); @@ -534,7 +539,7 @@ class StatusPanel : public StatusBasePanel void on_ams_selected(wxCommandEvent &event); void on_ams_guide(wxCommandEvent &event); void on_ams_retry(wxCommandEvent &event); - void on_print_error_func(wxCommandEvent& event); + void on_print_error_done(wxCommandEvent& event); void on_fan_changed(wxCommandEvent& event); void on_cham_temp_kill_focus(wxFocusEvent& event); @@ -579,9 +584,6 @@ class StatusPanel : public StatusBasePanel void on_webrequest_state(wxWebRequestEvent &evt); bool is_task_changed(MachineObject* obj); - /* model mall score */ - bool model_score_is_update(); - /* camera */ void update_camera_state(MachineObject* obj); bool show_vcamera = false; @@ -625,7 +627,6 @@ class StatusPanel : public StatusBasePanel void set_default(); void show_status(int status); - void set_print_finish_status(bool is_finish); void set_hold_count(int& count); void rescale_camera_icons(); diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp index 43c39922ae5..4104ee06809 100644 --- a/src/slic3r/GUI/Tab.cpp +++ b/src/slic3r/GUI/Tab.cpp @@ -2098,7 +2098,7 @@ void TabPrint::build() optgroup = page->new_optgroup(L("Special mode"), L"param_special"); optgroup->append_single_option_line("slicing_mode"); - optgroup->append_single_option_line("print_sequence"); + optgroup->append_single_option_line("print_sequence", "sequent-print"); optgroup->append_single_option_line("spiral_mode", "spiral-vase"); optgroup->append_single_option_line("timelapse_type", "Timelapse"); @@ -2726,7 +2726,7 @@ void TabFilament::build() optgroup = page->new_optgroup(L("Print temperature"), L"param_temperature"); - optgroup->append_single_option_line("chamber_temperature"); + optgroup->append_single_option_line("chamber_temperature","chamber-temperature"); optgroup->append_separator(); diff --git a/src/slic3r/Utils/CalibUtils.cpp b/src/slic3r/Utils/CalibUtils.cpp index d711bac6add..6561bedfe72 100644 --- a/src/slic3r/Utils/CalibUtils.cpp +++ b/src/slic3r/Utils/CalibUtils.cpp @@ -11,7 +11,8 @@ namespace Slic3r { namespace GUI { std::shared_ptr CalibUtils::print_job; -static const std::string temp_dir = fs::path(fs::temp_directory_path() / "calib").string(); +wxString wxstr_temp_dir = fs::path(fs::temp_directory_path() / "calib").wstring(); +static const std::string temp_dir = wxstr_temp_dir.utf8_string(); static const std::string temp_gcode_path = temp_dir + "/temp.gcode"; static const std::string path = temp_dir + "/test.3mf"; static const std::string config_3mf_path = temp_dir + "/test_config.3mf"; diff --git a/version.inc b/version.inc index 3a81f235b2b..2dbf6773daf 100644 --- a/version.inc +++ b/version.inc @@ -16,4 +16,4 @@ string(REGEX MATCH "^([0-9]+)\\.([0-9]+)\\.([0-9]+)" set(ORCA_VERSION_MAJOR ${CMAKE_MATCH_1}) set(ORCA_VERSION_MINOR ${CMAKE_MATCH_2}) set(ORCA_VERSION_PATCH ${CMAKE_MATCH_3}) -set(SLIC3R_VERSION "01.07.06.92") \ No newline at end of file +set(SLIC3R_VERSION "01.07.07.89") \ No newline at end of file