From 9b385d363c1f837e0c88a0f4bc0fbf28f6d13644 Mon Sep 17 00:00:00 2001 From: shuwn <20023822+shuwn@users.noreply.github.com> Date: Sat, 11 Jan 2025 00:10:46 +0800 Subject: [PATCH] Remove specific files from PR --- .github/workflows/build_all.yml | 11 +- .../i18n/zh_TW/OrcaSlicer_zh_TW_2025.01.09.po | 15440 ---------------- 2 files changed, 5 insertions(+), 15446 deletions(-) delete mode 100644 localization/i18n/zh_TW/OrcaSlicer_zh_TW_2025.01.09.po diff --git a/.github/workflows/build_all.yml b/.github/workflows/build_all.yml index bbec1338d75..6aa50095c02 100644 --- a/.github/workflows/build_all.yml +++ b/.github/workflows/build_all.yml @@ -13,7 +13,6 @@ on: - 'localization/**' - 'resources/**' - ".github/workflows/build_*.yml" - - "localization/i18n/zh_TW/OrcaSlicer_zh_TW.po" pull_request: branches: @@ -48,11 +47,11 @@ jobs: fail-fast: false matrix: include: - # - os: ubuntu-20.04 - # - os: ubuntu-24.04 - # - os: windows-latest - # - os: macos-14 - # arch: x86_64 + - os: ubuntu-20.04 + - os: ubuntu-24.04 + - os: windows-latest + - os: macos-14 + arch: x86_64 - os: macos-14 arch: arm64 uses: ./.github/workflows/build_check_cache.yml diff --git a/localization/i18n/zh_TW/OrcaSlicer_zh_TW_2025.01.09.po b/localization/i18n/zh_TW/OrcaSlicer_zh_TW_2025.01.09.po deleted file mode 100644 index a7fc0430969..00000000000 --- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW_2025.01.09.po +++ /dev/null @@ -1,15440 +0,0 @@ -# Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER -# This file is distributed under the same license as the PACKAGE package. -# FIRST Translator Jiang Yue , 2019. -# REVISED lin-ycv , 2024. -# REVISED Shuwn Hsu, 2024. -# -msgid "" -msgstr "" -"Project-Id-Version: Orca Slicer\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-04 17:35+0100\n" -"PO-Revision-Date: 2025-01-08 13:25+0800\n" -"Last-Translator: Shuwn Hsu\n" -"Language-Team: \n" -"Language: zh_TW\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Poedit 3.5\n" - -msgid "Supports Painting" -msgstr "支撐筆刷" - -msgid "Alt + Mouse wheel" -msgstr "Alt + 滑鼠滾輪" - -msgid "Section view" -msgstr "剖面圖" - -msgid "Reset direction" -msgstr "重置方向" - -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + 滑鼠滾輪" - -msgid "Pen size" -msgstr "筆刷尺寸" - -msgid "Left mouse button" -msgstr "滑鼠左鍵" - -msgid "Enforce supports" -msgstr "新增支撐區" - -msgid "Right mouse button" -msgstr "滑鼠右鍵" - -msgid "Block supports" -msgstr "不產生支撐區" - -msgid "Shift + Left mouse button" -msgstr "Shift + 滑鼠左鍵" - -msgid "Erase" -msgstr "擦除" - -msgid "Erase all painting" -msgstr "擦除所有自訂支撐" - -msgid "Highlight overhang areas" -msgstr "突顯出懸空區域" - -msgid "Gap fill" -msgstr "縫隙填充" - -msgid "Perform" -msgstr "套用" - -msgid "Gap area" -msgstr "間隙面積" - -msgid "Tool type" -msgstr "筆刷類型" - -msgid "Smart fill angle" -msgstr "智慧填充角度" - -msgid "On overhangs only" -msgstr "僅對懸空區生效" - -msgid "Auto support threshold angle: " -msgstr "自動支撐角度臨界值：" - -msgid "Circle" -msgstr "圓形" - -msgid "Sphere" -msgstr "球體" - -msgid "Fill" -msgstr "填充" - -msgid "Gap Fill" -msgstr "縫隙填充" - -#, boost-format -msgid "Allows painting only on facets selected by: \"%1%\"" -msgstr "僅允許在由以下條件選擇的平面上進行繪製：%1%" - -msgid "Highlight faces according to overhang angle." -msgstr "根據懸空角度突顯出表面。" - -msgid "No auto support" -msgstr "無自動支撐" - -msgid "Support Generated" -msgstr "已產生支撐" - -msgid "Gizmo-Place on Face" -msgstr "Gizmo-放置在臉上" - -msgid "Lay on face" -msgstr "選擇底面" - -#, possible-boost-format -msgid "" -"Filament count exceeds the maximum number that painting tool supports. only " -"the first %1% filaments will be available in painting tool." -msgstr "線材數量超過上色工具支援的最大值，僅前 %1% 個線材可在上色工具中使用。" - -msgid "Color Painting" -msgstr "顏色筆刷" - -msgid "Pen shape" -msgstr "筆刷形狀" - -msgid "Paint" -msgstr "繪製" - -msgid "Key 1~9" -msgstr "按鍵 1～9" - -msgid "Choose filament" -msgstr "選擇線材" - -msgid "Edge detection" -msgstr "偵測邊緣" - -msgid "Triangles" -msgstr "三角形" - -msgid "Filaments" -msgstr "線材" - -msgid "Brush" -msgstr "筆刷" - -msgid "Smart fill" -msgstr "智慧填充" - -msgid "Bucket fill" -msgstr "批次填充" - -msgid "Height range" -msgstr "高度範圍" - -msgid "Alt + Shift + Enter" -msgstr "Alt + Shift + Enter" - -msgid "Toggle Wireframe" -msgstr "顯示/隱藏線框" - -msgid "Shortcut Key " -msgstr "快捷鍵 " - -msgid "Triangle" -msgstr "三角形" - -msgid "Height Range" -msgstr "高度範圍" - -msgid "Vertical" -msgstr "垂直" - -msgid "Horizontal" -msgstr "水平" - -msgid "Remove painted color" -msgstr "移除已繪製的顏色" - -#, boost-format -msgid "Painted using: Filament %1%" -msgstr "上色：線材 %1%" - -msgid "Move" -msgstr "移動" - -msgid "Gizmo-Move" -msgstr "Gizmo-移動" - -msgid "Rotate" -msgstr "旋轉" - -msgid "Gizmo-Rotate" -msgstr "Gizmo-旋轉" - -msgid "Optimize orientation" -msgstr "最佳化方向" - -msgid "Apply" -msgstr "套用" - -msgid "Scale" -msgstr "縮放" - -msgid "Gizmo-Scale" -msgstr "Gizmo 比例" - -msgid "Error: Please close all toolbar menus first" -msgstr "錯誤：請先關閉所有工具欄選單" - -msgid "in" -msgstr "在" - -msgid "mm" -msgstr "mm" - -msgid "Position" -msgstr "位置" - -#. TRN - Input label. Be short as possible -#. Angle between Y axis and text line direction. -#. TRN - Input label. Be short as possible -msgid "Rotation" -msgstr "旋轉" - -msgid "Scale ratios" -msgstr "縮放比例" - -#, fuzzy -msgid "Object Operations" -msgstr "物件操作" - -msgid "Volume Operations" -msgstr "零件操作" - -msgid "Translate" -msgstr "平移" - -msgid "Group Operations" -msgstr "裙組操作" - -msgid "Set Position" -msgstr "設定位置" - -msgid "Set Orientation" -msgstr "設定方向" - -msgid "Set Scale" -msgstr "設定縮放" - -msgid "Reset Position" -msgstr "重設位置" - -msgid "Reset Rotation" -msgstr "重設旋轉" - -msgid "World coordinates" -msgstr "世界座標" - -msgid "Object coordinates" -msgstr "物件座標" - -msgid "°" -msgstr "°" - -#. TRN - Input label. Be short as possible -msgid "Size" -msgstr "尺寸" - -msgid "%" -msgstr "%" - -msgid "uniform scale" -msgstr "等比例縮放" - -msgid "Planar" -msgstr "平面" - -msgid "Dovetail" -msgstr "鳩尾榫" - -msgid "Auto" -msgstr "自動" - -msgid "Manual" -msgstr "手動" - -msgid "Plug" -msgstr "插銷" - -msgid "Dowel" -msgstr "銷釘" - -msgid "Snap" -msgstr "卡扣" - -msgid "Prism" -msgstr "錐體" - -msgid "Frustum" -msgstr "截頭圓錐" - -msgid "Square" -msgstr "正方形" - -msgid "Hexagon" -msgstr "六邊形" - -msgid "Keep orientation" -msgstr "保持方向" - -msgid "Place on cut" -msgstr "切割面貼其於列印底板" - -msgid "Flip upside down" -msgstr "倒轉" - -msgid "Connectors" -msgstr "連接件" - -msgid "Type" -msgstr "類型" - -msgid "Style" -msgstr "樣式" - -msgid "Shape" -msgstr "形狀" - -#. TRN - Input label. Be short as possible -#. Size in emboss direction -#. TRN - Input label. Be short as possible -msgid "Depth" -msgstr "深度" - -msgid "Groove" -msgstr "凹槽" - -msgid "Width" -msgstr "寬度" - -msgid "Flap Angle" -msgstr "翼偏角" - -msgid "Groove Angle" -msgstr "凹槽角" - -msgid "Part" -msgstr "零件" - -msgid "Object" -msgstr "物件" - -msgid "" -"Click to flip the cut plane\n" -"Drag to move the cut plane" -msgstr "點擊翻轉切割面\n" -"拖曳移動切割面" - -msgid "" -"Click to flip the cut plane\n" -"Drag to move the cut plane\n" -"Right-click a part to assign it to the other side" -msgstr "" -"點擊翻轉切割平面\n" -"拖曳移動切割平面\n" -"右鍵點擊部件以將其分配到對側" - -msgid "Move cut plane" -msgstr "移動切割面" - -msgid "Mode" -msgstr "模式" - -msgid "Change cut mode" -msgstr "變更切割模式" - -msgid "Tolerance" -msgstr "公差" - -msgid "Drag" -msgstr "拖拉" - -msgid "Draw cut line" -msgstr "畫切割線" - -msgid "Left click" -msgstr "滑鼠左鍵" - -msgid "Add connector" -msgstr "新增連接件" - -msgid "Right click" -msgstr "滑鼠右鍵" - -msgid "Remove connector" -msgstr "刪除連接件" - -msgid "Move connector" -msgstr "移動連接件" - -msgid "Add connector to selection" -msgstr "選擇連接件" - -msgid "Remove connector from selection" -msgstr "取消選擇連接件" - -msgid "Select all connectors" -msgstr "選擇所有連接件" - -msgid "Cut" -msgstr "切割" - -msgid "Rotate cut plane" -msgstr "旋轉切割面" - -msgid "Remove connectors" -msgstr "刪除所有連接件" - -msgid "Bulge" -msgstr "凸起" - -msgid "Bulge proportion related to radius" -msgstr "與半徑相關的凸起比例" - -msgid "Space" -msgstr "空格鍵" - -msgid "Space proportion related to radius" -msgstr "與半徑相關的空間佔比" - -msgid "Confirm connectors" -msgstr "確認" - -msgid "Cancel" -msgstr "取消" - -msgid "Build Volume" -msgstr "列印體積" - -msgid "Flip cut plane" -msgstr "翻轉切割面" - -msgid "Groove change" -msgstr "凹槽調整" - -msgid "Reset" -msgstr "重設" - -#. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'. -msgid "Edited" -msgstr "編輯" - -msgid "Cut position" -msgstr "切割位置" - -msgid "Reset cutting plane" -msgstr "重設切割面" - -msgid "Edit connectors" -msgstr "編輯連接件" - -msgid "Add connectors" -msgstr "新增連接件" - -msgid "Reset cut" -msgstr "重設切割" - -msgid "Reset cutting plane and remove connectors" -msgstr "重設切割面且移除連接件" - -msgid "Upper part" -msgstr "上半部分" - -msgid "Lower part" -msgstr "下半部分" - -msgid "Keep" -msgstr "保留" - -msgid "Flip" -msgstr "翻轉" - -msgid "After cut" -msgstr "切割後" - -msgid "Cut to parts" -msgstr "切割為零件" - -msgid "Perform cut" -msgstr "執行切割" - -msgid "Warning" -msgstr "警告" - -msgid "Invalid connectors detected" -msgstr "偵測到無效連接件" - -#, possible-c-format, possible-boost-format -msgid "%1$d connector is out of cut contour" -msgid_plural "%1$d connectors are out of cut contour" -msgstr[0] "有 %1$d 個連接件超出切割範圍" -msgstr[1] "有 %1$d 個連接件超出切割範圍" - -#, possible-c-format, possible-boost-format -msgid "%1$d connector is out of object" -msgid_plural "%1$d connectors are out of object" -msgstr[0] "有 %1$d 個連接件不在物體範圍內" -msgstr[1] "有 %1$d 個連接件不在物體範圍內" - -msgid "Some connectors are overlapped" -msgstr "存在連接件相互重疊" - -msgid "Select at least one object to keep after cutting." -msgstr "切割後保留至少一個物件。" - -msgid "Cut plane is placed out of object" -msgstr "切割面在物件外" - -msgid "Cut plane with groove is invalid" -msgstr "帶有凹槽的切割平面無效" - -msgid "Connector" -msgstr "連接件" - -msgid "Cut by Plane" -msgstr "用平面分割" - -msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" -msgstr "切科後產生非流形邊，是否要修復?" - -msgid "Repairing model object" -msgstr "修復模型物件" - -msgid "Cut by line" -msgstr "用線切割" - -msgid "Delete connector" -msgstr "刪除連接件" - -msgid "Mesh name" -msgstr "Mesh 名稱" - -msgid "Detail level" -msgstr "細節等級" - -msgid "Decimate ratio" -msgstr "簡化率" - -#, possible-boost-format -msgid "" -"Processing model '%1%' with more than 1M triangles could be slow. It is " -"highly recommended to simplify the model." -msgstr "處理超過具有 1M 個三角形的模型 '%1%' 可能會很慢。強烈建議簡化模型。" - -msgid "Simplify model" -msgstr "簡化模型" - -msgid "Simplify" -msgstr "簡化" - -msgid "Simplification is currently only allowed when a single part is selected" -msgstr "僅支援對單一零件做簡化" - -msgid "Error" -msgstr "錯誤" - -msgid "Extra high" -msgstr "非常高" - -msgid "High" -msgstr "高" - -msgid "Medium" -msgstr "中" - -msgid "Low" -msgstr "低" - -msgid "Extra low" -msgstr "非常低" - -#, c-format, boost-format -msgid "%d triangles" -msgstr "%d 個三角形" - -msgid "Show wireframe" -msgstr "顯示線框" - -#, boost-format -msgid "%1%" -msgstr "%1%" - -msgid "Can't apply when process preview." -msgstr "處理預覽的過程中無法套用。" - -msgid "Operation already cancelling. Please wait few seconds." -msgstr "操作已在取消中，請稍後。" - -msgid "Face recognition" -msgstr "外觀面偵測" - -msgid "Perform Recognition" -msgstr "執行偵測" - -msgid "Brush size" -msgstr "筆刷尺寸" - -msgid "Brush shape" -msgstr "筆刷形狀" - -#, fuzzy -msgid "Enforce seam" -msgstr "新增 Z 縫產生區" - -#, fuzzy -msgid "Block seam" -msgstr "不產生 Z 縫區" - -msgid "Seam painting" -msgstr "Z 縫筆刷" - -msgid "Remove selection" -msgstr "移除繪製" - -msgid "Entering Seam painting" -msgstr "進入 Z 縫繪製模式" - -msgid "Leaving Seam painting" -msgstr "退出 Z 縫繪製模式" - -msgid "Paint-on seam editing" -msgstr "Z 縫筆刷編輯" - -#. TRN - Input label. Be short as possible -#. Select look of letter shape -msgid "Font" -msgstr "字型" - -msgid "Thickness" -msgstr "厚度" - -msgid "Text Gap" -msgstr "文字間距" - -msgid "Angle" -msgstr "角度" - -msgid "" -"Embedded\n" -"depth" -msgstr "內嵌深度" - -msgid "Input text" -msgstr "輸入文字" - -msgid "Surface" -msgstr "附著於曲面" - -msgid "Horizontal text" -msgstr "水平文字" - -msgid "Shift + Mouse move up or down" -msgstr "Shift + 滑鼠上移或下移" - -msgid "Rotate text" -msgstr "旋轉文字" - -msgid "Text shape" -msgstr "新增文字" - -#. TRN - Title in Undo/Redo stack after rotate with text around emboss axe -msgid "Text rotate" -msgstr "文字旋轉" - -#. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface -msgid "Text move" -msgstr "文字移動" - -msgid "Set Mirror" -msgstr "設定鏡像" - -msgid "Embossed text" -msgstr "浮雕文字" - -msgid "Enter emboss gizmo" -msgstr "進入浮雕工具" - -msgid "Leave emboss gizmo" -msgstr "退出浮雕工具" - -msgid "Embossing actions" -msgstr "浮雕操作" - -msgid "Emboss" -msgstr "浮雕" - -msgid "NORMAL" -msgstr "正常" - -msgid "SMALL" -msgstr "小" - -msgid "ITALIC" -msgstr "斜體" - -msgid "SWISS" -msgstr "" - -msgid "MODERN" -msgstr "" - -msgid "First font" -msgstr "" - -msgid "Default font" -msgstr "預設字型" - -msgid "Advanced" -msgstr "高級" - -msgid "" -"The text cannot be written using the selected font. Please try choosing a " -"different font." -msgstr "文字與字型不相容，請選擇其他的字型。" - -msgid "Embossed text cannot contain only white spaces." -msgstr "浮雕文字不能僅包含空白字元。" - -msgid "Text contains character glyph (represented by '?') unknown by font." -msgstr "文字包含字型無法識別的字形（以 '?' 表示）。" - -msgid "Text input doesn't show font skew." -msgstr "文字輸入未呈現字體的傾斜效果。" - -msgid "Text input doesn't show font boldness." -msgstr "文字輸入呈現示字體的粗體效果。" - -msgid "Text input doesn't show gap between lines." -msgstr "文字輸入未呈現行距效果。" - -msgid "Too tall, diminished font height inside text input." -msgstr "過高，已縮小文字輸入框內的字體高度。" - -msgid "Too small, enlarged font height inside text input." -msgstr "太小，已增大文字輸入框內的字體高度。" - -msgid "Text doesn't show current horizontal alignment." -msgstr "文字未呈現當前的水平對齊狀態。" - -msgid "Revert font changes." -msgstr "還原字體設定變更。" - -#, boost-format -msgid "Font \"%1%\" can't be selected." -msgstr "字型 \"%1%\" 無法選擇。" - -msgid "Operation" -msgstr "操作" - -msgid "Join" -msgstr "合併" - -msgid "Click to change text into object part." -msgstr "點擊將文字轉換為物件部分。" - -msgid "You can't change a type of the last solid part of the object." -msgstr "你無法變更模型最後一個實體部分的類型。" - -msgctxt "EmbossOperation" -msgid "Cut" -msgstr "切割" - -msgid "Click to change part type into negative volume." -msgstr "點擊將零件類型變更為負體積。" - -msgid "Modifier" -msgstr "修改器" - -msgid "Click to change part type into modifier." -msgstr "點擊將零件類型變更為修改器。" - -msgid "Change Text Type" -msgstr "更改文字類型" - -#, boost-format -msgid "Rename style(%1%) for embossing text" -msgstr "重新命名浮雕文字樣式 (%1%)" - -msgid "Name can't be empty." -msgstr "名稱不可空白。" - -msgid "Name has to be unique." -msgstr "名稱必須是獨特的。" - -msgid "OK" -msgstr "確認" - -msgid "Rename style" -msgstr "更改樣式名稱" - -msgid "Rename current style." -msgstr "更改目前樣式名稱。" - -msgid "Can't rename temporary style." -msgstr "無法更改臨時樣式名稱。" - -msgid "First Add style to list." -msgstr "首先將樣式添加到列表中。" - -#, boost-format -msgid "Save %1% style" -msgstr "儲存 %1% 的樣式" - -msgid "No changes to save." -msgstr "無需保存，因為沒有變更。" - -msgid "New name of style" -msgstr "新樣式名稱" - -msgid "Save as new style" -msgstr "儲存為新的樣式" - -msgid "Only valid font can be added to style." -msgstr "只有有效字體才能加入樣式。" - -msgid "Add style to my list." -msgstr "把樣式加入我的列表。" - -msgid "Save as new style." -msgstr "儲存為全新的樣式。" - -msgid "Remove style" -msgstr "刪除樣式" - -msgid "Can't remove the last existing style." -msgstr "無法刪除僅存的樣式。" - -#, boost-format -msgid "Are you sure you want to permanently remove the \"%1%\" style?" -msgstr "您確定要永久移除「%1%」樣式嗎？" - -#, boost-format -msgid "Delete \"%1%\" style." -msgstr "刪除「%1%」樣式。" - -#, boost-format -msgid "Can't delete \"%1%\". It is last style." -msgstr "無法刪除「%1%」，因為它是僅存的樣式。" - -#, boost-format -msgid "Can't delete temporary style \"%1%\"." -msgstr "無法刪除臨時樣式「%1%」。" - -#, boost-format -msgid "Modified style \"%1%\"" -msgstr "已修改樣式「%1%」" - -#, boost-format -msgid "Current style is \"%1%\"" -msgstr "當前樣式為「%1%」" - -#, possible-boost-format -msgid "" -"Changing style to \"%1%\" will discard current style modification.\n" -"\n" -"Would you like to continue anyway?" -msgstr "" -"將樣式更改為「%1%」會捨棄當前的樣式修改。\n" -"\n" -"您確定要繼續嗎？" - -msgid "Not valid style." -msgstr "無效的樣式。" - -#, boost-format -msgid "Style \"%1%\" can't be used and will be removed from a list." -msgstr "樣式「%1%」無法使用，將從列表中移除。" - -msgid "Unset italic" -msgstr "取消斜體" - -msgid "Set italic" -msgstr "斜體" - -msgid "Unset bold" -msgstr "取消粗體" - -msgid "Set bold" -msgstr "粗體" - -msgid "Revert text size." -msgstr "恢復文字大小。" - -msgid "Revert embossed depth." -msgstr "恢復浮雕深度。" - -msgid "" -"Advanced options cannot be changed for the selected font.\n" -"Select another font." -msgstr "無法更改所選字型的進階選項。\n" -"請選擇其他字型。" - -msgid "Revert using of model surface." -msgstr "還原模型表面的應用設定。" - -msgid "Revert Transformation per glyph." -msgstr "重置每個字形的變更設定。" - -msgid "Set global orientation for whole text." -msgstr "設定整段文字的全域座標。" - -msgid "Set position and orientation per glyph." -msgstr "設定每個字形的位置和方向。" - -msgctxt "Alignment" -msgid "Left" -msgstr "左" - -msgctxt "Alignment" -msgid "Center" -msgstr "置中" - -msgctxt "Alignment" -msgid "Right" -msgstr "右" - -msgctxt "Alignment" -msgid "Top" -msgstr "頂部" - -msgctxt "Alignment" -msgid "Middle" -msgstr "置中" - -msgctxt "Alignment" -msgid "Bottom" -msgstr "底部" - -msgid "Revert alignment." -msgstr "恢復對。" - -#. TRN EmbossGizmo: font units -msgid "points" -msgstr "pt" - -msgid "Revert gap between characters" -msgstr "恢復字元間距" - -msgid "Distance between characters" -msgstr "字元間距" - -msgid "Revert gap between lines" -msgstr "恢復線間距" - -msgid "Distance between lines" -msgstr "線間距" - -msgid "Undo boldness" -msgstr "恢復粗體" - -msgid "Tiny / Wide glyphs" -msgstr "細小 / 寬大字形」" - -msgid "Undo letter's skew" -msgstr "恢復文字變形" - -msgid "Italic strength ratio" -msgstr "斜體效果的強度比例" - -msgid "Undo translation" -msgstr "恢復移動" - -msgid "Distance of the center of the text to the model surface." -msgstr "文字中心到模型表面的距離。" - -msgid "Undo rotation" -msgstr "恢復旋轉" - -msgid "Rotate text Clock-wise." -msgstr "文字順時針旋轉。" - -msgid "Unlock the text's rotation when moving text along the object's surface." -msgstr "在沿物體表面移動文字時解鎖文字旋轉。" - -msgid "Lock the text's rotation when moving text along the object's surface." -msgstr "將文字旋轉鎖定，並沿物體表面移動文字。" - -msgid "Select from True Type Collection." -msgstr "從 True Type 中選擇。" - -msgid "Set text to face camera" -msgstr "將文字面對相機" - -msgid "Orient the text towards the camera." -msgstr "將文字朝向相機定向。" - -#, possible-boost-format -msgid "" -"Can't load exactly same font(\"%1%\"). Application selected a similar " -"one(\"%2%\"). You have to specify font for enable edit text." -msgstr "無法加載完全相同的字體 (\"%1%\")。已自動選擇相似的字體 (\"%2%\")。若要啟用文字編輯，請指定字體。" - - -msgid "No symbol" -msgstr "沒有任何字符" - -msgid "Loading" -msgstr "載入中" - -msgid "In queue" -msgstr "在佇列中" - -#. TRN - Input label. Be short as possible -#. Height of one text line - Font Ascent -msgid "Height" -msgstr "高度" - -#. TRN - Input label. Be short as possible -#. Copy surface of model on surface of the embossed text -#. TRN - Input label. Be short as possible -msgid "Use surface" -msgstr "用面" - -#. TRN - Input label. Be short as possible -#. Option to change projection on curved surface -#. for each character(glyph) in text separately -msgid "Per glyph" -msgstr "每個字形" - -#. TRN - Input label. Be short as possible -#. Align Top|Middle|Bottom and Left|Center|Right -msgid "Alignment" -msgstr "對齊" - -#. TRN - Input label. Be short as possible -msgid "Char gap" -msgstr "字元間距" - -#. TRN - Input label. Be short as possible -msgid "Line gap" -msgstr "行間距" - -#. TRN - Input label. Be short as possible -msgid "Boldness" -msgstr "粗細" - -#. TRN - Input label. Be short as possible -#. Like Font italic -msgid "Skew ratio" -msgstr "傾斜比率" - -#. TRN - Input label. Be short as possible -#. Distance from model surface to be able -#. move text as part fully into not flat surface -#. move text as modifier fully out of not flat surface -#. TRN - Input label. Be short as possible -msgid "From surface" -msgstr "從面" - -#. TRN - Input label. Be short as possible -#. Keep vector from bottom to top of text aligned with printer Y axis -msgid "Keep up" -msgstr "保持向上" - -#. TRN - Input label. Be short as possible. -#. Some Font file contain multiple fonts inside and -#. this is numerical selector of font inside font collections -msgid "Collection" -msgstr "字集" - -#. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe -msgid "SVG rotate" -msgstr "SVG 旋轉" - -#. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface -msgid "SVG move" -msgstr "SVG 移動" - -msgid "Enter SVG gizmo" -msgstr "進入 SVG 工具" - -msgid "Leave SVG gizmo" -msgstr "退出 SVG 工具" - -msgid "SVG actions" -msgstr "SVG 操作" - -msgid "SVG" -msgstr "SVG" - -#, boost-format -msgid "Opacity (%1%)" -msgstr "不透明度 (%1%)" - -#, boost-format -msgid "Color gradient (%1%)" -msgstr "顏色漸層 (%1%)" - -msgid "Undefined fill type" -msgstr "未定義的填充類型" - -msgid "Linear gradient" -msgstr "線性漸層" - -msgid "Radial gradient" -msgstr "徑向漸層" - -msgid "Open filled path" -msgstr "打開填充路徑" - -msgid "Undefined stroke type" -msgstr "未定義的筆劃類型" - -msgid "Path can't be healed from self-intersection and multiple points." -msgstr "無法修復具有自交錯和多點的路徑。" - -msgid "" -"Final shape contains self-intersection or multiple points with same " -"coordinate." -msgstr "最終形狀包含自相交或多個具有相同座標的點。" - -#, boost-format -msgid "Shape is marked as invisible (%1%)." -msgstr "形狀被標記為隱形 (%1%)。" - -#. TRN: The first placeholder is shape identifier, the second one is text describing the problem. -#, boost-format -msgid "Fill of shape (%1%) contains unsupported: %2%." -msgstr "形狀 (%1%) 的填充包含不支援的內容：%2%。" - -#, boost-format -msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." -msgstr "形狀 (%1%) 的筆劃過細（最小寬度為 %2% 毫米）" - -#, boost-format -msgid "Stroke of shape (%1%) contains unsupported: %2%." -msgstr "形狀 (%1%) 的筆劃包含不支援的內容：%2%。" - -msgid "Face the camera" -msgstr "面向相機" - -#. TRN - Preview of filename after clear local filepath. -msgid "Unknown filename" -msgstr "未知的檔案名稱" - -#, boost-format -msgid "SVG file path is \"%1%\"" -msgstr "SVG 檔案路徑為 \"%1%\"" - -msgid "Reload SVG file from disk." -msgstr "從硬碟重新載入 SVG 檔案。" - -msgid "Change file" -msgstr "更換檔案" - -msgid "Change to another .svg file" -msgstr "更換為另一個 .svg 檔案" - -msgid "Forget the file path" -msgstr "忘記檔案路徑" - -msgid "" -"Do NOT save local path to 3MF file.\n" -"Also disables 'reload from disk' option." -msgstr "" -"不要將本地路徑保存到 3MF 文件中。\n" -"同時禁用「從磁碟重新載入」選項。" - -#. TRN: An menu option to convert the SVG into an unmodifiable model part. -msgid "Bake" -msgstr "固化" - -#. TRN: Tooltip for the menu item. -msgid "Bake into model as uneditable part" -msgstr "固化至模型中作為不可編輯部分" - -msgid "Save as" -msgstr "儲存為" - -msgid "Save SVG file" -msgstr "儲存 '.svg' 檔案" - -msgid "Save as '.svg' file" -msgstr "儲存為 '.svg' 檔案" - -msgid "Size in emboss direction." -msgstr "浮雕方向的尺寸。" - -#. TRN: The placeholder contains a number. -#, boost-format -msgid "Scale also changes amount of curve samples (%1%)" -msgstr "縮放同時會改變曲線取樣數量（%1%）。" - -msgid "Width of SVG." -msgstr "SVG 寬。" - -msgid "Height of SVG." -msgstr "SVG 高。" - -msgid "Lock/unlock the aspect ratio of the SVG." -msgstr "鎖定/解鎖 SVG 的長寬比。" - -msgid "Reset scale" -msgstr "重置比例" - -msgid "Distance of the center of the SVG to the model surface." -msgstr "SVG 中心到模型表面的距離。" - -msgid "Reset distance" -msgstr "重置距離" - -msgid "Reset rotation" -msgstr "重置旋轉" - -msgid "Lock/unlock rotation angle when dragging above the surface." -msgstr "拖曳於表面時，鎖定/解鎖旋轉角度。" - -msgid "Mirror vertically" -msgstr "垂直鏡像" - -msgid "Mirror horizontally" -msgstr "水平鏡像" - -#. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). -msgid "Change SVG Type" -msgstr "更改 SVG 類型" - -#. TRN - Input label. Be short as possible -msgid "Mirror" -msgstr "鏡像" - -msgid "Choose SVG file for emboss:" -msgstr "選擇用於浮雕的 SVG 檔案：" - -#, boost-format -msgid "File does NOT exist (%1%)." -msgstr "檔案不存在（%1%）。" - -#, boost-format -msgid "Filename has to end with \".svg\" but you selected %1%" -msgstr "副檔名必須為 \".svg\" ，但選擇的是 %1%" - -#, boost-format -msgid "Nano SVG parser can't load from file (%1%)." -msgstr "Nano SVG 解析器無法載入文件 (%1%)。" - -#, boost-format -msgid "SVG file does NOT contain a single path to be embossed (%1%)." -msgstr "SVG 文件無要浮雕的路徑 (%1%)。" - -msgid "Vertex" -msgstr "頂點" - -msgid "Edge" -msgstr "邊" - -msgid "Plane" -msgstr "平面" - -msgid "Point on edge" -msgstr "邊上的點" - -msgid "Point on circle" -msgstr "圓上的點" - -msgid "Point on plane" -msgstr "平面上的點" - -msgid "Center of edge" -msgstr "邊中心" - -msgid "Center of circle" -msgstr "圓中心" - -msgid "Select feature" -msgstr "選擇特徵" - -msgid "Select point" -msgstr "選點" - -msgid "Delete" -msgstr "刪除" - -msgid "Restart selection" -msgstr "重新開始選取" - -msgid "Esc" -msgstr "Esc" - -msgid "Cancel a feature until exit" -msgstr "在退出前取消功能" - -msgid "Measure" -msgstr "測量" - -msgid "" -"Please confirm explosion ratio = 1,and please select at least one object" -msgstr "" - -msgid "Please select at least one object." -msgstr "請選擇至少一個物件。" - -msgid "Edit to scale" -msgstr "編輯比例" - -msgctxt "Verb" -msgid "Scale all" -msgstr "全部縮放" - -msgid "None" -msgstr "無" - -msgid "Diameter" -msgstr "直徑" - -msgid "Length" -msgstr "長度" - -msgid "Selection" -msgstr "所選項目" - -msgid " (Moving)" -msgstr " (移動)" - -msgid "" -"Select 2 faces on objects and \n" -" make objects assemble together." -msgstr "選擇物件上的兩個面，使物件組裝在一起。" - -msgid "" -"Select 2 points or circles on objects and \n" -" specify distance between them." -msgstr "選擇物件上的兩個點或圓，指定它們之間的距離。" - -msgid "Face" -msgstr "面" - -msgid " (Fixed)" -msgstr " (固定)" - -msgid "Point" -msgstr "點" - -msgid "" -"Feature 1 has been reset, \n" -"feature 2 has been feature 1" -msgstr "" -"特徵 1 已重設，\n" -"特徵 2 已變為特徵 1" - -msgid "Warning:please select Plane's feature." -msgstr "警告：請選擇平面的特徵。" - -msgid "Warning:please select Point's or Circle's feature." -msgstr "警告：請選擇點或圓的特徵。" - -msgid "Warning:please select two different mesh." -msgstr "警告：請選擇兩個不同的網格。" - -msgid "Copy to clipboard" -msgstr "複製到剪貼簿" - -msgid "Perpendicular distance" -msgstr "垂直方向" - -msgid "Distance" -msgstr "距離" - -msgid "Direct distance" -msgstr "直接距離" - -msgid "Distance XYZ" -msgstr "XYZ 距離" - -msgid "Parallel" -msgstr "平行" - -msgid "Center coincidence" -msgstr "中心重合" - -msgid "Featue 1" -msgstr "特徵 1" - -msgid "Reverse rotation" -msgstr "反向旋轉" - -msgid "Rotate around center:" -msgstr "圍繞中心旋轉：" - -msgid "Parallel distance:" -msgstr "平行距離：" - -msgid "Flip by Face 2" -msgstr "通過面 2 翻轉" - -msgid "Ctrl+" -msgstr "Ctrl+" - -msgid "Notice" -msgstr "通知" - -msgid "Undefined" -msgstr "未定義" - -#, boost-format -msgid "%1% was replaced with %2%" -msgstr "%1% 已被 %2% 替換" - -msgid "The configuration may be generated by a newer version of OrcaSlicer." -msgstr "此設定可能是新版本的 Orca Slicer 所產生。" - -msgid "Some values have been replaced. Please check them:" -msgstr "部分數值已被更換，請檢查：" - -msgid "Process" -msgstr "列印參數" - -msgid "Filament" -msgstr "線材" - -msgid "Machine" -msgstr "列印設備" - -msgid "Configuration package was loaded, but some values were not recognized." -msgstr "設定檔已被載入，但部分數值無法識別。" - -#, possible-boost-format -msgid "" -"Configuration file \"%1%\" was loaded, but some values were not recognized." -msgstr "設定檔 \"%1%\" 已被載入，但部分數值無法識別。" - -msgid "" -"OrcaSlicer will terminate because of running out of memory.It may be a bug. " -"It will be appreciated if you report the issue to our team." -msgstr "系統記憶體耗盡，Orca Slicer 即將停止並且結束。這可能是個錯誤，希望你可以回報此問題，我們非常感激。" - -msgid "Fatal error" -msgstr "致命錯誤" - -msgid "" -"OrcaSlicer will terminate because of a localization error. It will be " -"appreciated if you report the specific scenario this issue happened." -msgstr "遇到語系本地化錯誤，Orca Slicer 即將停止並且結束。希望你可以回報發生此問題的具體狀況，我們非常感激。" - -msgid "Critical error" -msgstr "嚴重錯誤" - -#, boost-format -msgid "OrcaSlicer got an unhandled exception: %1%" -msgstr "Orca Slicer 遭遇到一個未處理的例外：%1%" - -msgid "Untitled" -msgstr "未命名" - -msgid "Downloading Bambu Network Plug-in" -msgstr "正在下載 Bambu 網路插件" - -msgid "Login information expired. Please login again." -msgstr "登入資訊已過期。請重新登入。" - -msgid "Incorrect password" -msgstr "密碼不正確" - -#, c-format, boost-format -msgid "Connect %s failed! [SN:%s, code=%s]" -msgstr "連接 %s 失敗。[SN：%s, code＝%s]" - -msgid "" -"Orca Slicer requires the Microsoft WebView2 Runtime to operate certain " -"features.\n" -"Click Yes to install it now." -msgstr "Orca Slicer 需要 Microsoft WebView2 Runtime 才能操作某些功能，請點擊 Yes 進行安裝。" - -msgid "WebView2 Runtime" -msgstr "WebView2 Runtime" - -#, possible-c-format, possible-boost-format -msgid "" -"%s\n" -"Do you want to continue?" -msgstr "%s\n" -"是否繼續?" - -msgid "Remember my choice" -msgstr "記住我的選擇" - -msgid "Loading configuration" -msgstr "正在讀取設定檔" - -#, c-format, boost-format -msgid "Click to download new version in default browser: %s" -msgstr "在預設瀏覽器中開啟頁面下載最新版本： %s" - -msgid "The Orca Slicer needs an upgrade" -msgstr "Orca Slicer 需要進行升級" - -msgid "This is the newest version." -msgstr "已經是最新版本。" - -msgid "Info" -msgstr "資訊" - -msgid "" -"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n" -"OrcaSlicer has attempted to recreate the configuration file.\n" -"Please note, application settings will be lost, but printer profiles will " -"not be affected." -msgstr "" -"OrcaSlicer 的組態檔案可能已損壞，無法解析。\n" -"OrcaSlicer 已嘗試重新創建組態檔案。\n" -"請注意，應用程式設定將會丟失，但機臺組態設定不會受到影響。" - -msgid "Rebuild" -msgstr "重新建構" - -#, fuzzy -msgid "Loading current presets" -msgstr "載入目前預設" - -msgid "Loading a mode view" -msgstr "載入模式視圖" - -msgid "Choose one file (3mf):" -msgstr "選擇一個檔案（3mf）" - -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "選擇一個或多個檔案（3mf/step/stl/svg/obj/amf/usd*/abc/ply）：" - -msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" -msgstr "選擇一個或多個檔案（3mf/step/stl/svg/obj/amf）：" - -msgid "Choose ZIP file" -msgstr "選擇 ZIP 檔" - -msgid "Choose one file (gcode/3mf):" -msgstr "選擇一個檔案（gcode/3mf）：" - -msgid "Some presets are modified." -msgstr "部分預設已被修改。" - -msgid "" -"You can keep the modified presets to the new project, discard or save " -"changes as new presets." -msgstr "你可以保留尚未儲存修改的預設應用到新項目中，或者選擇忽略。" - -msgid "User logged out" -msgstr "使用者登出" - -msgid "new or open project file is not allowed during the slicing process!" -msgstr "在執行切片過程中不允許新增或打開專案項目！" - -msgid "Open Project" -msgstr "打開專案項目" - -msgid "" -"The version of Orca Slicer is too low and needs to be updated to the latest " -"version before it can be used normally" -msgstr "Orca Slicer 版本過舊，需要更新到最新版本才能正常使用" - -msgid "Privacy Policy Update" -msgstr "隱私協議更新" - -msgid "" -"The number of user presets cached in the cloud has exceeded the upper limit, " -"newly created user presets can only be used locally." -msgstr "雲端儲存的用戶預設數量已超過上限，新的用戶預設僅能在本地使用。" - -msgid "Sync user presets" -msgstr "同步用戶預設" - -msgid "Loading user preset" -msgstr "正在載入使用者預設" - -msgid "Switching application language" -msgstr "切換應用程式語言" - -msgid "Select the language" -msgstr "選擇語言" - -msgid "Language" -msgstr "語言" - -msgid "*" -msgstr "*" - -msgid "The uploads are still ongoing" -msgstr "正在上傳任務中" - -msgid "Stop them and continue anyway?" -msgstr "停止並且繼續？" - -msgid "Ongoing uploads" -msgstr "正在進行的上傳" - -msgid "Select a G-code file:" -msgstr "選擇一個 G-code 檔案：" - -msgid "" -"Could not start URL download. Destination folder is not set. Please choose " -"destination folder in Configuration Wizard." -msgstr "無法開始 URL 下載。未設置目標資料夾。請在設定精靈中選擇目標資料夾。" - -msgid "Import File" -msgstr "匯入檔案" - -msgid "Choose files" -msgstr "選擇檔案" - -msgid "New Folder" -msgstr "新增資料夾" - -msgid "Open" -msgstr "打開" - -msgid "Rename" -msgstr "重新命名" - -msgid "Orca Slicer GUI initialization failed" -msgstr "Orca Slicer 圖形界面初始化失敗" - -#, boost-format -msgid "Fatal error, exception caught: %1%" -msgstr "致命錯誤，遭遇到異常：%1%" - -msgid "Quality" -msgstr "品質" - -msgid "Shell" -msgstr "外殼" - -msgid "Infill" -msgstr "填充" - -msgid "Support" -msgstr "支撐" - -msgid "Flush options" -msgstr "換料沖刷選項" - -msgid "Speed" -msgstr "速度" - -msgid "Strength" -msgstr "結構" - -msgid "Top Solid Layers" -msgstr "頂部實心層" - -msgid "Top Minimum Shell Thickness" -msgstr "頂部外殼最小厚度" - -msgid "Bottom Solid Layers" -msgstr "底部實心層" - -msgid "Bottom Minimum Shell Thickness" -msgstr "底部外殼最小厚度" - -msgid "Ironing" -msgstr "熨燙" - -msgid "Fuzzy Skin" -msgstr "絨毛表面" - -msgid "Extruders" -msgstr "擠出機" - -msgid "Extrusion Width" -msgstr "擠出寬度" - -msgid "Wipe options" -msgstr "擦除選項" - -msgid "Bed adhesion" -msgstr "熱床黏接" - -msgid "Add part" -msgstr "新增零件" - -msgid "Add negative part" -msgstr "新增負零件" - -msgid "Add modifier" -msgstr "新增修改器" - -msgid "Add support blocker" -msgstr "新增支撐遮蔽" - -msgid "Add support enforcer" -msgstr "新增支撐產生器" - -msgid "Add text" -msgstr "加文字" - -msgid "Add negative text" -msgstr "加負文字" - -msgid "Add text modifier" -msgstr "加文字修改器" - -msgid "Add SVG part" -msgstr "加SVG物件" - -msgid "Add negative SVG" -msgstr "加負SVG" - -msgid "Add SVG modifier" -msgstr "加SVG修改器" - -msgid "Select settings" -msgstr "選擇設定" - -msgid "Hide" -msgstr "隱藏" - -msgid "Show" -msgstr "顯示" - -msgid "Del" -msgstr "刪除" - -msgid "Delete the selected object" -msgstr "刪除所選物件" - -msgid "Load..." -msgstr "載入..." - -msgid "Cube" -msgstr "立方體" - -msgid "Cylinder" -msgstr "圓柱體" - -msgid "Cone" -msgstr "錐體" - -msgid "Disc" -msgstr "圓盤" - -msgid "Torus" -msgstr "環面" - -msgid "Orca Cube" -msgstr "Orca 立方體" - -msgid "3DBenchy" -msgstr "測試小船" - -msgid "Autodesk FDM Test" -msgstr "Autodesk FDM 測試" - -msgid "Voron Cube" -msgstr "Voron 立方體" - -msgid "Stanford Bunny" -msgstr "斯坦福兔子" - -msgid "Orca String Hell" -msgstr "Orca 拉絲測試" - -msgid "" -"This model features text embossment on the top surface. For optimal results, " -"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " -"for the 'Only One Wall on Top Surfaces' to work best.\n" -"Yes - Change these settings automatically\n" -"No - Do not change these settings for me" -msgstr "" -"這個模型在頂部表面具有文字浮雕效果。為了達到最佳效果，建議將「One Wall Threshold（min_width_top_surface）」設為 0，" -"以便「僅在頂部表面用一層牆壁」能夠最佳運作。\n" -"是 - 自動更改這些設定\n" -"否 - 不為我更改這些設定" - -msgid "Text" -msgstr "文字" - -msgid "Height range Modifier" -msgstr "高度範圍修改器" - -msgid "Add settings" -msgstr "新增設定" - -msgid "Change type" -msgstr "更改類型" - -#, fuzzy -msgid "Set as an individual object" -msgstr "設定為獨立物件" - -#, fuzzy -msgid "Set as individual objects" -msgstr "設定為獨立物件" - -msgid "Fill bed with copies" -msgstr "填滿列印底板" - -msgid "Fill the remaining area of bed with copies of the selected object" -msgstr "複製選取物件來填滿列印底板的空白區域" - -msgid "Printable" -msgstr "要列印的" - -msgid "Fix model" -msgstr "修復模型" - -msgid "Export as one STL" -msgstr "匯出為一個STL" - -msgid "Export as STLs" -msgstr "匯出為STLs" - -msgid "Reload from disk" -msgstr "從硬碟重新載入" - -msgid "Reload the selected parts from disk" -msgstr "從磁碟重新載入選中的零件" - -msgid "Replace with STL" -msgstr "替換為 STL" - -msgid "Replace the selected part with new STL" -msgstr "用新的 STL 替換選中的零件" - -msgid "Change filament" -msgstr "更換線材" - -msgid "Set filament for selected items" -msgstr "為所選物件設定使用的線材" - -msgid "Default" -msgstr "預設" - -#, c-format, boost-format -msgid "Filament %d" -msgstr "線材 %d" - -#, fuzzy -msgid "current" -msgstr "目前" - -msgid "Scale to build volume" -msgstr "縮放到列印空間範圍大小" - -msgid "Scale an object to fit the build volume" -msgstr "縮放物件以適應列印空間範圍大小" - -#, fuzzy -msgid "Flush Options" -msgstr "換料沖刷選項" - -msgid "Flush into objects' infill" -msgstr "將換料的廢料使用在物件的填充" - -msgid "Flush into this object" -msgstr "將換料的廢料使用在這個物件" - -msgid "Flush into objects' support" -msgstr "將換料的廢料使用在物件的支撐" - -msgid "Edit in Parameter Table" -msgstr "在參數表格中編輯" - -msgid "Convert from inch" -msgstr "從英寸轉換" - -msgid "Restore to inch" -msgstr "恢復到英寸" - -msgid "Convert from meter" -msgstr "從公尺轉換" - -msgid "Restore to meter" -msgstr "恢復到公尺" - -msgid "Assemble" -msgstr "組合" - -msgid "Assemble the selected objects to an object with multiple parts" -msgstr "組合所選物件為一個多零件物件" - -msgid "Assemble the selected objects to an object with single part" -msgstr "組合所選物件為一個單零件物件" - -#, fuzzy -msgid "Mesh boolean" -msgstr "網格布林操作" - -#, fuzzy -msgid "Mesh boolean operations including union and subtraction" -msgstr "包括併集和差集的網格布林運算" - -msgid "Along X axis" -msgstr "沿 X 軸" - -msgid "Mirror along the X axis" -msgstr "沿 X 軸鏡像" - -msgid "Along Y axis" -msgstr "沿 Y 軸" - -msgid "Mirror along the Y axis" -msgstr "沿 Y 軸鏡像" - -msgid "Along Z axis" -msgstr "沿 Z 軸" - -msgid "Mirror along the Z axis" -msgstr "沿 Z 軸鏡像" - -msgid "Mirror object" -msgstr "鏡像物件" - -msgid "Edit text" -msgstr "編輯文字" - -msgid "Ability to change text, font, size, ..." -msgstr "編輯文字、字型、尺寸..." - -msgid "Edit SVG" -msgstr "編輯SVG" - -msgid "Change SVG source file, projection, size, ..." -msgstr "更改SVG來源、投影、尺寸..." - -msgid "Invalidate cut info" -msgstr "解除切割關係" - -msgid "Add Primitive" -msgstr "新增標準模型" - -msgid "Add Handy models" -msgstr "新增測試用模型" - -msgid "Add Models" -msgstr "新增模型" - -msgid "Show Labels" -msgstr "顯示標籤" - -msgid "To objects" -msgstr "拆分到物件" - -msgid "Split the selected object into multiple objects" -msgstr "拆分所選物件為多個物件" - -msgid "To parts" -msgstr "到零件" - -msgid "Split the selected object into multiple parts" -msgstr "拆分所選物件為多個零件" - -msgid "Split" -msgstr "拆分" - -msgid "Split the selected object" -msgstr "拆分所選物件" - -msgid "Auto orientation" -msgstr "自動定向" - -msgid "Auto orient the object to improve print quality." -msgstr "自動調整物件轉向以提高列印品質。" - -msgid "Select All" -msgstr "全選" - -msgid "select all objects on current plate" -msgstr "全選此列印板上所有物件" - -msgid "Delete All" -msgstr "刪除所有" - -msgid "delete all objects on current plate" -msgstr "刪除此列印板上所有物件" - -msgid "Arrange" -msgstr "自動擺放" - -msgid "arrange current plate" -msgstr "自動擺放此列印版" - -msgid "Reload All" -msgstr "重新載入所有物件" - -msgid "reload all from disk" -msgstr "從硬碟重新載入所有物件" - -msgid "Auto Rotate" -msgstr "自動旋轉方向" - -msgid "auto rotate current plate" -msgstr "自動旋轉此列印板上的物件方向" - -msgid "Delete Plate" -msgstr "刪除列印板" - -msgid "Remove the selected plate" -msgstr "刪除所選列印板" - -msgid "Clone" -msgstr "複製" - -msgid "Simplify Model" -msgstr "簡化模型" - -msgid "Center" -msgstr "居中" - -msgid "Drop" -msgstr "" - -msgid "Edit Process Settings" -msgstr "編輯列印參數" - -msgid "Edit print parameters for a single object" -msgstr "編輯單個物件的列印參數" - -msgid "Change Filament" -msgstr "更換線材" - -msgid "Set Filament for selected items" -msgstr "為所選項目設定使用的線材" - -msgid "Unlock" -msgstr "解鎖" - -msgid "Lock" -msgstr "鎖定" - -msgid "Edit Plate Name" -msgstr "編輯列印板名" - -msgid "Name" -msgstr "名稱" - -msgid "Fila." -msgstr "線材。" - -#, c-format, boost-format -msgid "%1$d error repaired" -msgid_plural "%1$d errors repaired" -msgstr[0] "%1$d 個錯誤已修復" -msgstr[1] "%1$d 個錯誤已修復" - -#, c-format, boost-format -msgid "Error: %1$d non-manifold edge." -msgid_plural "Error: %1$d non-manifold edges." -msgstr[0] "%1$d 個非流形邊緣。" -msgstr[1] "%1$d 個非流形邊緣。" - -msgid "Remaining errors" -msgstr "剩餘錯誤" - -#, c-format, boost-format -msgid "%1$d non-manifold edge" -msgid_plural "%1$d non-manifold edges" -msgstr[0] "%1$d 個非流形邊緣" -msgstr[1] "%1$d 個非流形邊緣" - -msgid "Right click the icon to fix model object" -msgstr "滑鼠右鍵點擊此圖示修復物件模型" - -msgid "Right button click the icon to drop the object settings" -msgstr "滑鼠右鍵點擊此圖示以放棄物件的列印設定" - -msgid "Click the icon to reset all settings of the object" -msgstr "滑鼠左鍵點擊此圖示可重設物件的所有列印設定" - -#, fuzzy -msgid "Right button click the icon to drop the object printable property" -msgstr "滑鼠右鍵點擊此圖示以捨棄物件的可列印屬性" - -#, fuzzy -msgid "Click the icon to toggle printable property of the object" -msgstr "滑鼠左點擊此圖示可切換這個物件的可列印屬性" - -#, fuzzy -msgid "Click the icon to edit support painting of the object" -msgstr "滑鼠左鍵點擊此圖示可編輯這個物件的支撐繪製" - -#, fuzzy -msgid "Click the icon to edit color painting of the object" -msgstr "滑鼠左鍵點擊此圖示可編輯這個物件的顏色繪製" - -#, fuzzy -msgid "Click the icon to shift this object to the bed" -msgstr "滑鼠左鍵點擊這個圖示可將物件移動到列印板上" - -msgid "Loading file" -msgstr "載入檔案中" - -msgid "Error!" -msgstr "錯誤！" - -msgid "Failed to get the model data in the current file." -msgstr "取得目前檔案中的模型數據失敗。" - -msgid "Generic" -msgstr "一般" - -msgid "Add Modifier" -msgstr "新增修改器" - -msgid "Switch to per-object setting mode to edit modifier settings." -msgstr "切換到各個物件設定模式以編輯修改器的設定參數。" - -msgid "" -"Switch to per-object setting mode to edit process settings of selected " -"objects." -msgstr "切換到物件設定模式編輯所選物件的列印參數。" - -msgid "Delete connector from object which is a part of cut" -msgstr "刪除的連接件屬於切割物件的一部分" - -msgid "Delete solid part from object which is a part of cut" -msgstr "刪除的實體屬於切割物件的一部分" - -msgid "Delete negative volume from object which is a part of cut" -msgstr "刪除的負體積屬於切割物件的一部分" - -msgid "" -"To save cut correspondence you can delete all connectors from all related " -"objects." -msgstr "為保證切割關係，你可以將所有關聯物件的連接件一起刪除。" - -#, fuzzy -msgid "" -"This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed .\n" -"\n" -"To manipulate with solid parts or negative volumes you have to invalidate " -"cut information first." -msgstr "" -"此操作將打破切割對應關係。\n" -"模型一致性可能無法再保證。\n" -"\n" -"如果要操作子零件或者負體積，需要先解除切割關係。" - -msgid "Delete all connectors" -msgstr "刪除所有連接件" - -msgid "Deleting the last solid part is not allowed." -msgstr "不允許刪除物件的最後一個實體零件。" - -msgid "The target object contains only one part and can not be split." -msgstr "目標物件僅包含一個零件，無法被拆分。" - -msgid "Assembly" -msgstr "組合體" - -msgid "Cut Connectors information" -msgstr "切割連接件資訊" - -msgid "Object manipulation" -msgstr "物件操作" - -msgid "Group manipulation" -msgstr "裙組操作" - -msgid "Object Settings to modify" -msgstr "要修改的物件設定" - -msgid "Part Settings to modify" -msgstr "要修改的零件設定" - -msgid "Layer range Settings to modify" -msgstr "要修改的圖層範圍設定" - -msgid "Part manipulation" -msgstr "零件操作" - -msgid "Instance manipulation" -msgstr "實例操作" - -msgid "Height ranges" -msgstr "高度範圍" - -msgid "Settings for height range" -msgstr "高度範圍設定" - -msgid "Layer" -msgstr "層" - -msgid "Selection conflicts" -msgstr "選擇衝突" - -msgid "" -"If first selected item is an object, the second one should also be object." -msgstr "如果第一個選擇的是物件，那麼第二個選擇的也必須是物件。" - -msgid "" -"If first selected item is a part, the second one should be part in the same " -"object." -msgstr "如果第一個選擇的是零件，那麼第二個選擇的也必須是同一個物件中的零件。" - -msgid "The type of the last solid object part is not to be changed." -msgstr "不允許修改物件中最後一個實體零件的類型。" - -msgid "Negative Part" -msgstr "負零件" - -msgid "Support Blocker" -msgstr "支撐去除器" - -msgid "Support Enforcer" -msgstr "支撐添加器" - -msgid "Type:" -msgstr "類型：" - -msgid "Choose part type" -msgstr "選擇零件類型" - -msgid "Enter new name" -msgstr "輸入新名稱" - -msgid "Renaming" -msgstr "重新命名" - -msgid "Following model object has been repaired" -msgid_plural "Following model objects have been repaired" -msgstr[0] "以下模型物件已被修復" -msgstr[1] "以下模型物件已被修復" - -msgid "Failed to repair following model object" -msgid_plural "Failed to repair following model objects" -msgstr[0] "以下模型物件修復失敗" -msgstr[1] "以下模型物件修復失敗" - -msgid "Repairing was canceled" -msgstr "修復被取消" - -msgid "Additional process preset" -msgstr "附加列印參數預設" - -msgid "Remove parameter" -msgstr "刪除參數" - -msgid "to" -msgstr "到" - -msgid "Remove height range" -msgstr "移除高度範圍" - -msgid "Add height range" -msgstr "新增高度範圍" - -msgid "Invalid numeric." -msgstr "數值錯誤。" - -msgid "one cell can only be copied to one or multiple cells in the same column" -msgstr "一個單元格僅能被複製到同一列的一個或多個單元格" - -msgid "multiple cells copy is not supported" -msgstr "不支援多個單元格的複製" - -#, fuzzy -msgid "Outside" -msgstr "列印板外" - -msgid "Layer height" -msgstr "層高" - -msgid "Wall loops" -msgstr "牆層數" - -msgid "Infill density(%)" -msgstr "填充密度（%）" - -msgid "Auto Brim" -msgstr "自動Brim（裙邊）" - -msgid "Mouse ear" -msgstr "圓盤" - -msgid "Outer brim only" -msgstr "僅外側" - -msgid "Inner brim only" -msgstr "僅內側" - -msgid "Outer and inner brim" -msgstr "內側和外側" - -msgid "No-brim" -msgstr "無側裙（brim）" - -msgid "Outer wall speed" -msgstr "外牆速度" - -msgid "Plate" -msgstr "列印板" - -msgid "Brim" -msgstr "側裙（Brim）" - -msgid "Object/Part Setting" -msgstr "物件/零件 設定" - -msgid "Reset parameter" -msgstr "重設參數" - -msgid "Multicolor Print" -msgstr "多色列印" - -msgid "Line Type" -msgstr "走線類型" - -msgid "More" -msgstr "詳情" - -msgid "Open Preferences." -msgstr "偏好設定。" - -msgid "Open next tip." -msgstr "打開下一條提示。" - -msgid "Open Documentation in web browser." -msgstr "在網頁瀏覽器中打開檔案。" - -msgid "Color" -msgstr "顏色" - -msgid "Pause" -msgstr "暫停" - -msgid "Template" -msgstr "範本" - -msgid "Custom" -msgstr "自訂" - -msgid "Pause:" -msgstr "暫停：" - -msgid "Custom Template:" -msgstr "自訂模板：" - -msgid "Custom G-code:" -msgstr "自訂 G-code：" - -msgid "Custom G-code" -msgstr "自訂 G-code" - -msgid "Enter Custom G-code used on current layer:" -msgstr "輸入當層使用的自訂 G-code：" - -msgid "Jump to Layer" -msgstr "轉換到層" - -msgid "Please enter the layer number" -msgstr "請輸入層數" - -msgid "Add Pause" -msgstr "新增暫停列印" - -msgid "Insert a pause command at the beginning of this layer." -msgstr "在該層的初始位置插入暫停。" - -msgid "Add Custom G-code" -msgstr "新增自訂 G-code" - -msgid "Insert custom G-code at the beginning of this layer." -msgstr "在該層的初始位置插入自訂 G-code。" - -msgid "Add Custom Template" -msgstr "新增自訂模板" - -msgid "Insert template custom G-code at the beginning of this layer." -msgstr "在該層的初始位置插入模板自訂 G-code。" - -msgid "Filament " -msgstr "線材" - -msgid "Change filament at the beginning of this layer." -msgstr "在該層的初始位置更換線材。" - -msgid "Delete Pause" -msgstr "刪除暫停列印" - -msgid "Delete Custom Template" -msgstr "刪除自訂模板" - -msgid "Edit Custom G-code" -msgstr "編輯自訂 G-code" - -msgid "Delete Custom G-code" -msgstr "刪除自訂 G-code" - -msgid "Delete Filament Change" -msgstr "刪除線材更換" - -msgid "No printer" -msgstr "無列印設備" - -msgid "..." -msgstr "..." - -msgid "Failed to connect to the server" -msgstr "無法連接伺服器" - -#, fuzzy -msgid "Check the status of current system services" -msgstr "請檢查目前系統服務狀態" - -msgid "code" -msgstr "code" - -msgid "Failed to connect to cloud service" -msgstr "無法連接到雲端服務" - -msgid "Please click on the hyperlink above to view the cloud service status" -msgstr "請點擊上方的超連結以查看雲端服務狀態" - -msgid "Failed to connect to the printer" -msgstr "無法連接列印設備" - -msgid "Connection to printer failed" -msgstr "連接列印設備失敗" - -msgid "Please check the network connection of the printer and Orca." -msgstr "請檢查列印設備與 Orca Slicer 的網路連線。" - -msgid "Connecting..." -msgstr "連線中..." - -msgid "?" -msgstr "?" - -msgid "/" -msgstr "/" - -msgid "Empty" -msgstr "空" - -msgid "AMS" -msgstr "AMS" - -msgid "Auto Refill" -msgstr "自動補充" - -msgid "AMS not connected" -msgstr "AMS 尚未連接" - -msgid "Load" -msgstr "匯入" - -msgid "Unload" -msgstr "退料" - -msgid "Ext Spool" -msgstr "外掛線材" - -msgid "Tips" -msgstr "提示" - -msgid "Guide" -msgstr "引導" - -msgid "Retry" -msgstr "重試" - -msgid "Calibrating AMS..." -msgstr "正在校準 AMS..." - -msgid "A problem occurred during calibration. Click to view the solution." -msgstr "校準過程遇到問題。點擊查看解決方案。" - -msgid "Calibrate again" -msgstr "重新校準" - -msgid "Cancel calibration" -msgstr "取消校準" - -msgid "Idling..." -msgstr "閒置..." - -msgid "Heat the nozzle" -msgstr "加熱噴嘴" - -msgid "Cut filament" -msgstr "切斷線材" - -msgid "Pull back current filament" -msgstr "抽回線材" - -msgid "Push new filament into extruder" -msgstr "送出新的線材到擠出機" - -msgid "Purge old filament" -msgstr "清除舊線材" - -msgid "Feed Filament" -msgstr "進料" - -msgid "Confirm extruded" -msgstr "確認擠出" - -msgid "Check filament location" -msgstr "檢查線材位置" - -msgid "Grab new filament" -msgstr "咬入線材" - -msgid "" -"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically " -"load or unload filaments." -msgstr "選擇一個 AMS 槽，然後按下「上料」或「退料」按鈕來自動加載或卸載耗材。" - -msgid "Edit" -msgstr "編輯" - -msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-arrange on these objects." -msgstr "選定的物件都位於鎖定的列印板上，\n" -"無法對其進行自動排列。" - -msgid "" -"No arrangeable objects are selected." -msgstr "未選擇欲排列的物件象。" - -msgid "" -"This plate is locked,\n" -"We can not do auto-arrange on this plate." -msgstr "該列印板處於鎖定狀態，無法執行自動排列。" - -msgid "Arranging..." -msgstr "自動擺放中..." - -msgid "Arranging" -msgstr "自動擺放" - -msgid "Arranging canceled." -msgstr "已取消自動擺放。" - -msgid "" -"Arranging is done but there are unpacked items. Reduce spacing and try again." -msgstr "" -"已完成自動擺放，但是有未被擺到列印板內的物件，可縮小物件間距後再重試。" - -msgid "Arranging done." -msgstr "已完成自動擺放。" - -msgid "" -"Arrange failed. Found some exceptions when processing object geometries." -msgstr "自動擺放失敗，處理物件位置時遇到異常。" - -#, possible-c-format, possible-boost-format -msgid "" -"Arrangement ignored the following objects which can't fit into a single " -"bed:\n" -"%s" -msgstr "自動擺放忽略了以下無法放入單一列印板的物件：\n" -"%s" - -msgid "" -"All the selected objects are on the locked plate,\n" -"We can not do auto-orient on these objects." -msgstr "所有選中的物件都處於被鎖定的列印板上，\n" -"無法對這些物件做自動轉向。" - -msgid "" -"This plate is locked,\n" -"We can not do auto-orient on this plate." -msgstr "" -"該列印板處於鎖定狀態，\n" -"無法對其進行自動轉向。" - -msgid "Orienting..." -msgstr "自動旋轉方向..." - -msgid "Orienting" -msgstr "自動旋轉方向" - -msgid "Orienting canceled." -msgstr "自動轉向已取消。" - -msgid "Filling" -msgstr "填充中" - -msgid "Bed filling canceled." -msgstr "填充列印板已取消。" - -msgid "Bed filling done." -msgstr "填充列印板已完成。" - -msgid "Searching for optimal orientation" -msgstr "查詢最佳方向" - -msgid "Orientation search canceled." -msgstr "定向搜尋已取消." - -msgid "Orientation found." -msgstr "找到方向。" - -msgid "Logging in" -msgstr "登入中" - -msgid "Login failed" -msgstr "登入失敗" - -msgid "Please check the printer network connection." -msgstr "請檢查列印設備的網路連線。" - -msgid "Abnormal print file data. Please slice again." -msgstr "列印檔案資料異常，請重新切片。" - -msgid "Task canceled." -msgstr "任務已取消。" - -msgid "Upload task timed out. Please check the network status and try again." -msgstr "上傳任務逾時，請排查網路狀態後重試。" - -msgid "Cloud service connection failed. Please try again." -msgstr "雲端服務連接失敗，請重試。" - -msgid "Print file not found. please slice again." -msgstr "未找到列印檔案，請重新切片。" - -msgid "" -"The print file exceeds the maximum allowable size (1GB). Please simplify the " -"model and slice again." -msgstr "列印檔案超過最大允許大小（1GB），請簡化模型後重新切片。" - -msgid "Failed to send the print job. Please try again." -msgstr "無法傳送列印作業，請重試。" - -msgid "Failed to upload file to ftp. Please try again." -msgstr "上傳檔案至 FTP 失敗，請重試。" - -msgid "" -"Check the current status of the bambu server by clicking on the link above." -msgstr "點擊上方的連結檢查 Bambu 伺服器的即時狀態。" - -msgid "" -"The size of the print file is too large. Please adjust the file size and try " -"again." -msgstr "列印檔案過大，請調整檔案大小後重試。" - -msgid "Print file not found, Please slice it again and send it for printing." -msgstr "未找到列印檔案，請重新切片後再傳送列印。" - -msgid "" -"Failed to upload print file to FTP. Please check the network status and try " -"again." -msgstr "無法將列印檔案上傳至 FTP。請檢查網路狀態並重試。" - -msgid "Sending print job over LAN" -msgstr "正在通過區域網路傳送列印作業" - -msgid "Sending print job through cloud service" -msgstr "正在通過雲端服務傳送列印作業" - -msgid "Print task sending times out." -msgstr "連線逾時。" - -msgid "Service Unavailable" -msgstr "暫停服務" - -msgid "Unknown Error." -msgstr "未知錯誤。" - -msgid "Sending print configuration" -msgstr "正在傳送列印設定" - -#, c-format, boost-format -msgid "Successfully sent. Will automatically jump to the device page in %ss" -msgstr "已傳送完成，即將自動轉換到設備頁面（%s秒）" - -#, c-format, boost-format -msgid "Successfully sent. Will automatically jump to the next page in %ss" -msgstr "已成功傳送。將自動轉換到 %ss 中的下一頁" - -msgid "An SD card needs to be inserted before printing via LAN." -msgstr "透過區域網路列印之前需要插入 SD 記憶卡。" - -msgid "Sending gcode file over LAN" -msgstr "透過區域網路傳送 gcode 檔案" - -msgid "Sending gcode file to sdcard" -msgstr "傳送 gcode 檔案到 SD 記憶卡" - -#, c-format, boost-format -msgid "Successfully sent. Close current page in %s s" -msgstr "傳送成功。即將關閉目前頁面（%s秒）" - -msgid "An SD card needs to be inserted before sending to printer." -msgstr "列印設備要先插入SD卡才能接收傳送。" - -msgid "Importing SLA archive" -msgstr "匯入 SLA 存檔" - -msgid "" -"The SLA archive doesn't contain any presets. Please activate some SLA " -"printer preset first before importing that SLA archive." -msgstr "SLA 存檔不包含任何預設。在匯入該 SLA 存檔之前，請先啟用一些 SLA 列印設備預設。" - -msgid "Importing canceled." -msgstr "匯入已取消。" - -msgid "Importing done." -msgstr "匯入完成。" - -#, fuzzy -msgid "" -"The imported SLA archive did not contain any presets. The current SLA " -"presets were used as fallback." -msgstr "匯入的 SLA 存檔不包含任何預設。目前的 SLA 預設被用作備用選項。" - -msgid "You cannot load SLA project with a multi-part object on the bed" -msgstr "你無法在列印板上載入包含多部分物件的 SLA 項目" - -msgid "Please check your object list before preset changing." -msgstr "請在更改預設之前檢查你的物件清單。" - -msgid "Attention!" -msgstr "注意！" - -msgid "Downloading" -msgstr "下載中" - -msgid "Download failed" -msgstr "下載失敗" - -msgid "Cancelled" -msgstr "已取消" - -msgid "Install successfully." -msgstr "安裝成功。" - -msgid "Installing" -msgstr "安裝中" - -msgid "Install failed" -msgstr "安裝失敗" - -msgid "Portions copyright" -msgstr "部分版權" - -msgid "Copyright" -msgstr "版權" - -msgid "License" -msgstr "憑證" - -msgid "Orca Slicer is licensed under " -msgstr "Orca Slicer 授權於" - -msgid "GNU Affero General Public License, version 3" -msgstr "GNU Affero 通用公共許可證，版本 3" - -msgid "Orca Slicer is based on PrusaSlicer and BambuStudio" -msgstr "Orca Slicer 基於 PrusaSlicer 與 BambuStudio" - -msgid "Libraries" -msgstr "庫" - -msgid "" -"This software uses open source components whose copyright and other " -"proprietary rights belong to their respective owners" -msgstr "本軟體採用了開源組件，其版權及相關專有權歸屬於各自的所有者" - -#, c-format, boost-format -msgid "About %s" -msgstr "關於 %s" - -msgid "Orca Slicer" -msgstr "Orca Slicer" - -msgid "OrcaSlicer is based on BambuStudio, PrusaSlicer, and SuperSlicer." -msgstr "Orca Slicer 是基於 BambuStudio, PrusaSlicer, 與 SuperSlicer 的開發。" - -msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." -msgstr "BambuStudio 最初是基於 PrusaResearch 的 PrusaSlicer。" - -msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." -msgstr "PrusaSlicer 最初是基於 Alessandro Ranellucci 的 Slic3r。" - -msgid "" -"Slic3r was created by Alessandro Ranellucci with the help of many other " -"contributors." -msgstr "Slic3r 由 Alessandro Ranellucci 在其他眾多貢獻者的幫助下創建。" - -msgid "Version" -msgstr "版本" - -msgid "AMS Materials Setting" -msgstr "AMS 線材設定" - -msgid "Confirm" -msgstr "確定" - -msgid "Close" -msgstr "關閉" - -msgid "Colour" -msgstr "顏色" - -msgid "" -"Nozzle\n" -"Temperature" -msgstr "" -"噴嘴\n" -"溫度" - -msgid "max" -msgstr "最大" - -msgid "min" -msgstr "最小" - -#, boost-format -msgid "The input value should be greater than %1% and less than %2%" -msgstr "輸入的範圍在 %1% 和 %2% 之間" - -msgid "SN" -msgstr "序號" - -msgid "Setting AMS slot information while printing is not supported" -msgstr "不支援在列印時修改 AMS 槽位資訊" - -msgid "Factors of Flow Dynamics Calibration" -msgstr "動態流量係數校準" - -msgid "PA Profile" -msgstr "PA 配置檔" - -msgid "Factor K" -msgstr "係數 K" - -msgid "Factor N" -msgstr "係數 N" - -msgid "Setting Virtual slot information while printing is not supported" -msgstr "不支援在列印時設定虛擬槽位資訊" - -msgid "Are you sure you want to clear the filament information?" -msgstr "你確定要清除線材資訊嗎？" - -msgid "You need to select the material type and color first." -msgstr "你需要先選擇線材類型和顏色。" - -#, c-format, boost-format -msgid "Please input a valid value (K in %.1f~%.1f)" -msgstr "請輸入有效的數值 (K於 %.1f~%.1f 之間)" - -#, c-format, boost-format -msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" -msgstr "請輸入有效的數值 (K於 %.1f~%.1f 之間，N於 %.1f~%.1f 之間)" - -msgid "Other Color" -msgstr "其他顏色" - -msgid "Custom Color" -msgstr "自訂顏色" - -msgid "Dynamic flow calibration" -msgstr "動態流量校準" - -msgid "" -"The nozzle temp and max volumetric speed will affect the calibration " -"results. Please fill in the same values as the actual printing. They can be " -"auto-filled by selecting a filament preset." -msgstr "" -"噴嘴溫度和最大體積速度會影響到校準結果，請填寫與實際列印相同的數值。" -"可通過選擇已有的材料預設來自動填寫。" - -msgid "Nozzle Diameter" -msgstr "噴嘴直徑" - -msgid "Bed Type" -msgstr "列印板類型" - -msgid "Nozzle temperature" -msgstr "噴嘴溫度" - -msgid "Bed Temperature" -msgstr "熱床溫度" - -msgid "Max volumetric speed" -msgstr "最大體積速度" - -msgid "℃" -msgstr "" - -msgid "Bed temperature" -msgstr "床溫" - -msgid "mm³" -msgstr "mm³" - -msgid "Start calibration" -msgstr "開始" - -msgid "Next" -msgstr "下一步" - -msgid "" -"Calibration completed. Please find the most uniform extrusion line on your " -"hot bed like the picture below, and fill the value on its left side into the " -"factor K input box." -msgstr "" -"校準完成。如下圖中的範例，請在你的熱床上找到最均勻完整的擠出線，" -"並將其左側的數值填入係數 K 欄位。" - -msgid "Save" -msgstr "儲存" - -msgid "Last Step" -msgstr "上一步" - -msgid "Example" -msgstr "範例" - -#, possible-c-format, possible-boost-format -msgid "Calibrating... %d%%" -msgstr "校準中... %d%%" - -msgid "Calibration completed" -msgstr "校準已完成" - -#, possible-c-format, possible-boost-format -msgid "%s does not support %s" -msgstr "%s 不支援 %s" - -msgid "Dynamic flow Calibration" -msgstr "動態流量校準" - -msgid "Step" -msgstr "步驟" - -msgid "AMS Slots" -msgstr "AMS 槽內線材" - -msgid "" -"Note: Only the AMS slots loaded with the same material type can be selected." -msgstr "注意：僅能選擇裝有相同材料類型的 AMS 插槽。" - -msgid "Enable AMS" -msgstr "使用 AMS" - -msgid "Print with filaments in the AMS" -msgstr "使用 AMS 裡的線材列印" - -msgid "Disable AMS" -msgstr "停用 AMS" - -msgid "Print with the filament mounted on the back of chassis" -msgstr "使用機箱背後掛載的線材列印" - -msgid "Current Cabin humidity" -msgstr "濕度" - -msgid "" -"Please change the desiccant when it is too wet. The indicator may not " -"represent accurately in following cases : when the lid is open or the " -"desiccant pack is changed. it take hours to absorb the moisture, low " -"temperatures also slow down the process." -msgstr "" -"當乾燥劑過濕時，請更換乾燥劑。在以下情況下，指示器可能無法準確顯示：" -"當蓋子打開或更換乾燥劑包時。吸收濕氣需要數小時，低溫會進一步減緩此過程。" - -msgid "" -"Config which AMS slot should be used for a filament used in the print job" -msgstr "設定列印作業中所使用的線材應使用哪個 AMS 槽" - -msgid "Filament used in this print job" -msgstr "目前列印作業中使用的線材" - -msgid "AMS slot used for this filament" -msgstr "目前線材對應的 AMS 槽位" - -msgid "Click to select AMS slot manually" -msgstr "滑鼠左鍵點擊以手動選擇 AMS 槽位" - -msgid "Do not Enable AMS" -msgstr "不使用 AMS" - -msgid "Print using materials mounted on the back of the case" -msgstr "使用安裝在機箱背面的線材進行列印" - -msgid "Print with filaments in ams" -msgstr "使用 AMS 裡的線材列印" - -msgid "Print with filaments mounted on the back of the chassis" -msgstr "使用掛在機箱背部的線材列印" - -msgid "" -"When the current material run out, the printer will continue to print in the " -"following order." -msgstr "當目前線材用完時，列印設備將按照以下順序繼續列印。" - -msgid "Group" -msgstr "組" - -msgid "The printer does not currently support auto refill." -msgstr "此列印設備目前不支援自動補料功能。" - -msgid "" -"AMS filament backup is not enabled, please enable it in the AMS settings." -msgstr "AMS 線材備份功能尚未啟用，請在 AMS 設定中開啟。" - -msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" -msgstr "如果 AMS 中有兩個相同的線材，則會啟用 AMS 備用線材自動切換功能。\n" -"（目前支援同品牌、同材質、同顏色的線材自動切換）" - -msgid "DRY" -msgstr "乾" - -msgid "WET" -msgstr "濕" - -msgid "AMS Settings" -msgstr "AMS 設定" - -msgid "Insertion update" -msgstr "插入線材時更新" - -msgid "" -"The AMS will automatically read the filament information when inserting a " -"new Bambu Lab filament. This takes about 20 seconds." -msgstr "當插入新的 Bambu Lab 官方線材的時候，AMS 會自動讀取線材資訊。這個過程大約需要20秒。" - -msgid "" -"Note: if a new filament is inserted during printing, the AMS will not " -"automatically read any information until printing is completed." -msgstr "備註: 若在列印過程中插入新的線材，AMS會等到列印完成才會讀取線材資訊。" - -msgid "" -"When inserting a new filament, the AMS will not automatically read its " -"information, leaving it blank for you to enter manually." -msgstr "在插入一卷新線材時，AMS 將不會自動讀取線材資訊，預留一個空的線材資訊等待你手動輸入。" - -msgid "Power on update" -msgstr "開機時偵測" - -msgid "" -"The AMS will automatically read the information of inserted filament on " -"start-up. It will take about 1 minute.The reading process will roll filament " -"spools." -msgstr "每次開機時，AMS 將會自動讀取有插入的線材資訊（讀取過程會轉動線卷）。需要花費大約1分鐘。" - -msgid "" -"The AMS will not automatically read information from inserted filament " -"during startup and will continue to use the information recorded before the " -"last shutdown." -msgstr "AMS 不會在啟動時自動讀取線材資訊。它會使用上次關機前記錄的資訊。" - -msgid "Update remaining capacity" -msgstr "更新線材剩餘量" - -msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." -msgstr "AMS 會在耗材資訊更新後估算 Bambu 耗材的剩餘量，並在列印時自動更新剩餘容量。" - -#, fuzzy -msgid "AMS filament backup" -msgstr "AMS 備用線材" - -msgid "" -"AMS will continue to another spool with the same properties of filament " -"automatically when current filament runs out" -msgstr "AMS 線材耗盡後將自動切換到屬性完全相同的線材" - -msgid "Air Printing Detection" -msgstr "偵測到憑空列印" - -msgid "" -"Detects clogging and filament grinding, halting printing immediately to " -"conserve time and filament." -msgstr "偵測到卡料，已暫停列印來節省時間與線材。" - -msgid "File" -msgstr "檔案" - -msgid "Calibration" -msgstr "校準" - -msgid "" -"Failed to download the plug-in. Please check your firewall settings and vpn " -"software, check and retry." -msgstr "插件下載失敗。請檢查你的防火牆設定和 VPN 軟體，檢查後重試。" - -msgid "" -"Failed to install the plug-in. Please check whether it is blocked or deleted " -"by anti-virus software." -msgstr "插件安裝失敗。請檢查是否被防毒軟體阻擋或刪除。" - -msgid "click here to see more info" -msgstr "點擊這裡查看更多資訊" - -msgid "Please home all axes (click " -msgstr "請先執行回原點（點擊" - -msgid "" -") to locate the toolhead's position. This prevents device moving beyond the " -"printable boundary and causing equipment wear." -msgstr "）來定位工具頭的位置，這可防止設備移動超出可列印範圍，並避免設備磨損。" - -msgid "Go Home" -msgstr "回原點" - -msgid "" -"A error occurred. Maybe memory of system is not enough or it's a bug of the " -"program" -msgstr "發生錯誤。可能系統記憶體不足或者程式存在錯誤" - -msgid "Please save project and restart the program. " -msgstr "請儲存專案項目並重啟程式。" - -msgid "Processing G-Code from Previous file..." -msgstr "從之前的檔案載入 G-Code..." - -msgid "Slicing complete" -msgstr "切片完成" - -msgid "Access violation" -msgstr "非法訪問" - -msgid "Illegal instruction" -msgstr "非法指令" - -msgid "Divide by zero" -msgstr "除零" - -msgid "Overflow" -msgstr "上溢" - -msgid "Underflow" -msgstr "下溢" - -msgid "Floating reserved operand" -msgstr "浮點保留操作數" - -msgid "Stack overflow" -msgstr "堆疊溢位" - -msgid "Running post-processing scripts" -msgstr "執行後處理腳本" - -msgid "Successfully executed post-processing script" -msgstr "完成執行後處理腳本" - -msgid "Unknown error occurred during exporting G-code." -msgstr "匯出 G-code 期間發生未知錯誤。" - -#, possible-boost-format -msgid "" -"Copying of the temporary G-code to the output G-code failed. Maybe the SD " -"card is write locked?\n" -"Error message: %1%" -msgstr "" -"將臨時的 G-code 複製到輸出的 G-code 失敗 ，也許 SD 卡寫入被鎖定？\n" -"錯誤訊息：%1%" - -#, possible-boost-format -msgid "" -"Copying of the temporary G-code to the output G-code failed. There might be " -"problem with target device, please try exporting again or using different " -"device. The corrupted output G-code is at %1%.tmp." -msgstr "" -"將臨時 G-code 複製到輸出 G-code 時失敗。目標設備可能存在問題，" -"請嘗試再次匯出或使用不同的設備。損壞的 G-code 已輸出為 %1%.tmp。" - -#, possible-boost-format -msgid "" -"Renaming of the G-code after copying to the selected destination folder has " -"failed. Current path is %1%.tmp. Please try exporting again." -msgstr "複製到選取之目標檔案夾的 G-code 重命名失敗。目前路徑為 %1%.tmp。請再試看看匯出。" - -##, possible-boost-format -msgid "" -"Copying of the temporary G-code has finished but the original code at %1% " -"couldn't be opened during copy check. The output G-code is at %2%.tmp." -msgstr "" -"臨時 G-code 的 複製已完成，但原始 G-code 因 %1% 在複製檢查期間無法打開。" -"輸出 G-code 為%2%.tmp。" - -#, possible-boost-format -msgid "" -"Copying of the temporary G-code has finished but the exported code couldn't " -"be opened during copy check. The output G-code is at %1%.tmp." -msgstr "" -"臨時 G-code 的複制已完成，但匯出的 G-code 無法在復製檢查過程中打開。輸出 G-code 為 %1%.tmp。" - -#, possible-boost-format -msgid "G-code file exported to %1%" -msgstr "G-code 檔案已匯出為 %1%" - -msgid "Unknown error when export G-code." -msgstr "匯出 G-code 檔案發生未知錯誤。" - -#, possible-boost-format -msgid "" -"Failed to save gcode file.\n" -"Error message: %1%.\n" -"Source file %2%." -msgstr "" -"無法儲存 G-code 檔案。\n" -"錯誤資訊：%1%。\n" -"原始檔 %2%." - -msgid "Copying of the temporary G-code to the output G-code failed" -msgstr "將臨時 G-Code 複製到輸出 G-Code 失敗" - -#, boost-format -msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" -msgstr "計劃上傳到 `%1%`。請參閱視窗-> 列印設備上傳佇列" - -msgid "Device" -msgstr "設備" - -msgid "Task Sending" -msgstr "傳送中" - -msgid "Task Sent" -msgstr "傳送完成" - -msgid "Edit multiple printers" -msgstr "編輯多個列印設備" - -msgid "Select connected printers (0/6)" -msgstr "選擇已連線機台 (0/6)" - -#, c-format, boost-format -msgid "Select Connected Printers (%d/6)" -msgstr "選擇已連線機台 (%d/6)" - -#, c-format, boost-format -msgid "The maximum number of printers that can be selected is %d" -msgstr "最多可選擇 %d 台" - -msgid "Offline" -msgstr "離線" - -msgid "No task" -msgstr "無作業" - -msgid "View" -msgstr "視角" - -msgid "N/A" -msgstr "N/A" - -msgid "Edit Printers" -msgstr "編輯機台" - -msgid "Device Name" -msgstr "機台名稱" - -msgid "Task Name" -msgstr "作業名稱" - -msgid "Device Status" -msgstr "機台狀態" - -msgid "Actions" -msgstr "操作" - -msgid "" -"Please select the devices you would like to manage here (up to 6 devices)" -msgstr "請選擇要管理的設備（最多6台）" - -msgid "Add" -msgstr "新增" - -msgid "Idle" -msgstr "閒置" - -msgid "Printing" -msgstr "列印中" - -msgid "Upgrading" -msgstr "升級中" - -msgid "Incompatible" -msgstr "不相容的預設" - -msgid "syncing" -msgstr "同步中" - -msgid "Printing Finish" -msgstr "完成列印" - -msgid "Printing Failed" -msgstr "列印失敗" - -msgid "Printing Pause" -msgstr "列印暫停" - -msgid "Prepare" -msgstr "準備" - -msgid "Slicing" -msgstr "正在切片中" - -msgid "Pending" -msgstr "待處理" - -msgid "Sending" -msgstr "傳送中" - -msgid "Sending Finish" -msgstr "傳送完成" - -msgid "Sending Cancel" -msgstr "取消傳送" - -msgid "Sending Failed" -msgstr "傳送失敗" - -msgid "Print Success" -msgstr "列印成功" - -msgid "Print Failed" -msgstr "列印失敗" - -msgid "Removed" -msgstr "已移除" - -msgid "Resume" -msgstr "繼續" - -msgid "Stop" -msgstr "停止" - -msgid "Task Status" -msgstr "狀態" - -msgid "Sent Time" -msgstr "傳送時間" - -msgid "There are no tasks to be sent!" -msgstr "無檔案可傳！" - -msgid "No historical tasks!" -msgstr "無歷史記錄！" - -msgid "Loading..." -msgstr "正在載入影片……" - -msgid "No AMS" -msgstr "無 AMS" - -msgid "Send to Multi-device" -msgstr "傳送給多個機台" - -msgid "Preparing print job" -msgstr "正在準備列印作業" - -msgid "Abnormal print file data. Please slice again" -msgstr "列印檔案資料異常，請重新切片" - -msgid "There is no device available to send printing." -msgstr "沒有可用的機臺可以傳送列印。" - -msgid "The number of printers in use simultaneously cannot be equal to 0." -msgstr "同時使用的列印機數量不能為 0。" - -msgid "Use External Spool" -msgstr "使用外掛線盤" - -msgid "Use AMS" -msgstr "使用AMS" - -msgid "Select Printers" -msgstr "選擇列印設備" - -msgid "Ams Status" -msgstr "AMS狀態" - -msgid "Printing Options" -msgstr "列印選項" - -msgid "Bed Leveling" -msgstr "熱床調平" - -msgid "Timelapse" -msgstr "縮時攝影" - -msgid "Flow Dynamic Calibration" -msgstr "動態流量校準" - -msgid "Send Options" -msgstr "傳送選項" - -msgid "Send to" -msgstr "傳送到" - -msgid "" -"printers at the same time.(It depends on how many devices can undergo " -"heating at the same time.)" -msgstr "可同時運行的列印機數量。（取決於能同時加熱的設備數量而定。）" - -msgid "Wait" -msgstr "等待" - -msgid "" -"minute each batch.(It depends on how long it takes to complete the heating.)" -msgstr "每批次需要的分鐘數。（具體取決於加熱完成所需的時間。）" - -msgid "Send" -msgstr "傳送" - -msgid "Name is invalid;" -msgstr "無效名稱；" - -msgid "illegal characters:" -msgstr "非法字元：" - -msgid "illegal suffix:" -msgstr "非法後綴：" - -msgid "The name is not allowed to be empty." -msgstr "名稱不允許為空。" - -msgid "The name is not allowed to start with space character." -msgstr "名稱不允許以空格開頭。" - -msgid "The name is not allowed to end with space character." -msgstr "名稱不允許以空格結尾。" - -msgid "The name length exceeds the limit." -msgstr "名稱長度超過限制。" - -msgid "Origin" -msgstr "原點" - -msgid "Size in X and Y of the rectangular plate." -msgstr "矩形框在 X 和 Y 方向的尺寸。" - -msgid "" -"Distance of the 0,0 G-code coordinate from the front left corner of the " -"rectangle." -msgstr "G-code 0,0 座標相對於矩形框左前角的距離。" - -msgid "" -"Diameter of the print bed. It is assumed that origin (0,0) is located in the " -"center." -msgstr "列印平臺的直徑，假設原點 (0,0) 位於中央位置。" - -msgid "Rectangular" -msgstr "矩形" - -msgid "Circular" -msgstr "圓" - -msgid "Load shape from STL..." -msgstr "從 STL 檔案載入形狀..." - -msgid "Settings" -msgstr "設定" - -msgid "Texture" -msgstr "紋理" - -msgid "Remove" -msgstr "移除" - -msgid "Not found:" -msgstr "未發現：" - -msgid "Model" -msgstr "模型" - -msgid "Choose an STL file to import bed shape from:" -msgstr "選擇熱床形狀的 STL 檔案：" - -msgid "Invalid file format." -msgstr "無效的檔案格式。" - -msgid "Error! Invalid model" -msgstr "錯誤！無效模型" - -msgid "The selected file contains no geometry." -msgstr "所選檔案不包含任何幾何數據。" - -msgid "" -"The selected file contains several disjoint areas. This is not supported." -msgstr "所選檔案包含多個未連接的區域。不支援這種類型。" - -msgid "Choose a file to import bed texture from (PNG/SVG):" -msgstr "選擇（PNG/SVG）檔案作為熱床紋理：" - -msgid "Choose an STL file to import bed model from:" -msgstr "選擇 STL 檔案來匯入熱床模型：" - -msgid "Bed Shape" -msgstr "熱床形狀" - -msgid "" -"The recommended minimum temperature is less than 190 degree or the " -"recommended maximum temperature is greater than 300 degree.\n" -msgstr "推薦的最小溫度低於 190 度或推薦的最大溫度高於 300 度。\n" - -msgid "" -"The recommended minimum temperature cannot be higher than the recommended " -"maximum temperature.\n" -msgstr "推薦的最小溫度不能高於推薦的最大溫度。\n" - -msgid "Please check.\n" -msgstr "請檢查。\n" - -msgid "" -"Nozzle may be blocked when the temperature is out of recommended range.\n" -"Please make sure whether to use the temperature to print.\n" -"\n" -msgstr "" -"當溫度超過建議的範圍時，噴嘴可能會堵塞。\n" -"請確認是否使用該溫度列印\n" -"\n" - -#, possible-c-format, possible-boost-format -msgid "" -"Recommended nozzle temperature of this filament type is [%d, %d] degree " -"centigrade" -msgstr "該線材的推薦噴嘴溫度是攝氏 [%d, %d] 度" - -msgid "" -"Too small max volumetric speed.\n" -"Reset to 0.5" -msgstr "" -"最大體積速度設定過小\n" -"重設為 0.5" - -#, possible-c-format, possible-boost-format -msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" -msgstr "目前列印設備內部溫度高於線材的安全溫度，可能會導致線材軟化和堵塞。線材的最高安全溫度為：%d" - -msgid "" -"Too small layer height.\n" -"Reset to 0.2" -msgstr "" -"層高過小。\n" -"將重設為 0.2" - -#, fuzzy -msgid "" -"Too small ironing spacing.\n" -"Reset to 0.1" -msgstr "熨燙線距過小。\n" -"將重設為 0.1。" - -msgid "" -"Zero initial layer height is invalid.\n" -"\n" -"The first layer height will be reset to 0.2." -msgstr "0為無效的首層層高值。\n" -"將被重設為0.2。" - -#, fuzzy -msgid "" -"This setting is only used for model size tunning with small value in some " -"cases.\n" -"For example, when model size has small error and hard to be assembled.\n" -"For large size tuning, please use model scale function.\n" -"\n" -"The value will be reset to 0." -msgstr "" -"此設定僅用於在特定情況下對模型尺寸進行微調。\n" -"例如，當模型尺寸存在輕微誤差且難以組裝時。\n" -"如需大幅調整尺寸，請使用模型縮放功能\n。" -"\n" -"該值將會重置為 0。" - -#, fuzzy -msgid "" -"Too large elephant foot compensation is unreasonable.\n" -"If really have serious elephant foot effect, please check other settings.\n" -"For example, whether bed temperature is too high.\n" -"\n" -"The value will be reset to 0." -msgstr "" -"象腳補償設置過大是不合理的。" -"如果確實有嚴重的象腳效應，請檢查其他設置。\n" -"例如，檢查床溫是否設定過高。\n" -"\n" -"該值將會重置為 0。" - -msgid "" -"Alternate extra wall does't work well when ensure vertical shell thickness " -"is set to All. " -msgstr "當確保垂直外殼厚度設為「全部」時，交錯額外牆壁效果不佳。" - -msgid "" -"Change these settings automatically? \n" -"Yes - Change ensure vertical shell thickness to Moderate and enable " -"alternate extra wall\n" -"No - Don't use alternate extra wall" -msgstr "" -"是否自動更改這些設定？\n" -"是 - 將確保垂直外殼厚度設為中等並啟用交錯額外牆壁\n" -"否 - 不使用交錯額外牆壁" - -msgid "" -"Prime tower does not work when Adaptive Layer Height or Independent Support " -"Layer Height is on.\n" -"Which do you want to keep?\n" -"YES - Keep Prime Tower\n" -"NO - Keep Adaptive Layer Height and Independent Support Layer Height" -msgstr "" -"換料塔不支援和自適應層高或支撐獨立層高。同時開啟\n" -"如何選擇？\n" -"是 - 選擇開啟換料塔\n" -"否 - 選擇保留自適應層高或支撐獨立層高" - -msgid "" -"Prime tower does not work when Adaptive Layer Height is on.\n" -"Which do you want to keep?\n" -"YES - Keep Prime Tower\n" -"NO - Keep Adaptive Layer Height" -msgstr "" -"換料塔不支援和自適應層高同時開啟。\n" -"如何選擇？\n" -"是 - 選擇開啟換料塔\n" -"否 - 選擇保留自適應層高" - -msgid "" -"Prime tower does not work when Independent Support Layer Height is on.\n" -"Which do you want to keep?\n" -"YES - Keep Prime Tower\n" -"NO - Keep Independent Support Layer Height" -msgstr "" -"換料塔不支援和支撐獨立層高同時開啟。\n" -"如何選擇？\n" -"是 - 選擇開啟換料塔\n" -"否 - 選擇保留支撐獨立層高" - -msgid "" -"seam_slope_start_height need to be smaller than layer_height.\n" -"Reset to 0." -msgstr "" -"seam_slope_start_height 必須小於 layer_height。\n" -"重設為 0。" - -msgid "" -"Spiral mode only works when wall loops is 1, support is disabled, top shell " -"layers is 0, sparse infill density is 0 and timelapse type is traditional." -msgstr "花瓶模式必須調整以下設定才能使用：外牆層數為 1、關閉支撐、頂層層數為 0、稀疏填充密度為 0、縮時攝影模式為傳統。" - -msgid " But machines with I3 structure will not generate timelapse videos." -msgstr " 但採用 I3 結構的機器無法生成延時影片。" - -msgid "" -"Change these settings automatically? \n" -"Yes - Change these settings and enable spiral mode automatically\n" -"No - Give up using spiral mode this time" -msgstr "" -"自動調整這些設定？\n" -"是 - 自動調整這些設定並開啟花瓶模式\n" -"否 - 不使用花瓶模式" - -msgid "Auto bed leveling" -msgstr "熱床自動調平" - -msgid "Heatbed preheating" -msgstr "預熱熱床" - -msgid "Sweeping XY mech mode" -msgstr "掃描 XY 軸機械模態" - -msgid "Changing filament" -msgstr "更換線材" - -msgid "M400 pause" -msgstr "M400 暫停" - -msgid "Paused due to filament runout" -msgstr "斷料暫停" - -msgid "Heating hotend" -msgstr "加熱熱端" - -msgid "Calibrating extrusion" -msgstr "校準擠出補償" - -msgid "Scanning bed surface" -msgstr "掃描熱床" - -msgid "Inspecting first layer" -msgstr "檢查首層" - -msgid "Identifying build plate type" -msgstr "識別列印板類型" - -msgid "Calibrating Micro Lidar" -msgstr "校準微型雷射雷達" - -msgid "Homing toolhead" -msgstr "工具頭回到起始點" - -msgid "Cleaning nozzle tip" -msgstr "清理噴嘴頭" - -msgid "Checking extruder temperature" -msgstr "檢查擠出溫度" - -msgid "Printing was paused by the user" -msgstr "使用者暫停列印" - -msgid "Pause of front cover falling" -msgstr "工具頭前蓋掉落暫停列印" - -msgid "Calibrating the micro lida" -msgstr "校準微型雷射雷達" - -msgid "Calibrating extrusion flow" -msgstr "校準擠出流量" - -msgid "Paused due to nozzle temperature malfunction" -msgstr "暫停：噴嘴溫度異常" - -msgid "Paused due to heat bed temperature malfunction" -msgstr "暫停：熱床溫度異常" - -msgid "Filament unloading" -msgstr "退料中" - -msgid "Skip step pause" -msgstr "丟步暫停" - -msgid "Filament loading" -msgstr "進料中" - -msgid "Motor noise calibration" -msgstr "電機噪音校準" - -msgid "Paused due to AMS lost" -msgstr "由於 AMS 遺失而暫停" - -msgid "Paused due to low speed of the heat break fan" -msgstr "暫停：散熱風扇轉速過低" - -msgid "Paused due to chamber temperature control error" -msgstr "暫停：列印設備內部溫度控制錯誤" - -msgid "Cooling chamber" -msgstr "列印設備內部溫度冷卻中" - -msgid "Paused by the Gcode inserted by user" -msgstr "使用者插入的 Gcode 導致暫停" - -msgid "Motor noise showoff" -msgstr "電機噪音" - -msgid "Nozzle filament covered detected pause" -msgstr "檢測到噴嘴被耗材覆蓋，暫停列印" - -msgid "Cutter error pause" -msgstr "刀具錯誤，暫停列印" - -msgid "First layer error pause" -msgstr "第一層錯誤暫停" - -msgid "Nozzle clog pause" -msgstr "噴嘴賭賽暫停" - -msgid "Unknown" -msgstr "未定義" - -msgid "Fatal" -msgstr "致命" - -msgid "Serious" -msgstr "嚴重" - -msgid "Common" -msgstr "普通" - -msgid "Update successful." -msgstr "更新成功。" - -msgid "Downloading failed." -msgstr "下載失敗。" - -msgid "Verification failed." -msgstr "驗證失敗。" - -msgid "Update failed." -msgstr "更新失敗。" - -msgid "" -"The current chamber temperature or the target chamber temperature exceeds " -"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -"TPU) is not allowed to be loaded." -msgstr "當前或目標腔體溫度超過 45℃。為避免擠出機堵塞，不允許裝載低溫耗材（PLA/PETG/TPU）。" - -msgid "" -"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " -"avoid extruder clogging,it is not allowed to set the chamber temperature " -"above 45℃." -msgstr "擠出機中已裝載低溫耗材（PLA/PETG/TPU）。為避免擠出機堵塞，腔體溫度不可設定超過 45℃。" - -msgid "" -"When you set the chamber temperature below 40℃, the chamber temperature " -"control will not be activated. And the target chamber temperature will " -"automatically be set to 0℃." -msgstr "當腔體溫度設置低於 40℃時，腔體溫度控制將不會啟動，並且目標腔體溫度將自動設為 0℃。" - -msgid "Failed to start printing job" -msgstr "無法啟動列印作業" - -msgid "" -"This calibration does not support the currently selected nozzle diameter" -msgstr "校準不支援目前選擇的噴嘴直徑" - -msgid "Current flowrate cali param is invalid" -msgstr "目前流量校準參數無效" - -msgid "Selected diameter and machine diameter do not match" -msgstr "所選噴嘴直徑與設備不匹配" - -msgid "Failed to generate cali gcode" -msgstr "產生校準代碼失敗" - -msgid "Calibration error" -msgstr "校準錯誤" - -msgid "TPU is not supported by AMS." -msgstr "AMS 不支援 TPU 線材。" - -msgid "Bambu PET-CF/PA6-CF is not supported by AMS." -msgstr "AMS 不支援 Bambu PET-CF/PA6-CF。" - -msgid "" -"Damp PVA will become flexible and get stuck inside AMS,please take care to " -"dry it before use." -msgstr "潮濕的 PVA 會變得柔軟並黏在 AMS 內，請在使用前注意乾燥。" - -msgid "" -"CF/GF filaments are hard and brittle, It's easy to break or get stuck in " -"AMS, please use with caution." -msgstr "含 CF/GF 線材又硬又脆，在 AMS 中很容易斷裂或卡住，請謹慎使用。" - -msgid "default" -msgstr "預設" - -#, boost-format -msgid "Edit Custom G-code (%1%)" -msgstr "編輯自訂 GOCDE（%1%）" - -msgid "Built-in placeholders (Double click item to add to G-code)" -msgstr "內建占位符（雙點擊加入GCODE）" - -msgid "Search gcode placeholders" -msgstr "收尋GOCDE內的占位符" - -msgid "Add selected placeholder to G-code" -msgstr "將占位符加到GCODE" - -msgid "Select placeholder" -msgstr "占位符" - -msgid "[Global] Slicing State" -msgstr "[全域]切片狀態" - -msgid "Read Only" -msgstr "唯讀" - -msgid "Read Write" -msgstr "讀寫" - -msgid "Slicing State" -msgstr "切片狀態" - -msgid "Print Statistics" -msgstr "列印數據" - -msgid "Objects Info" -msgstr "物件資訊" - -msgid "Dimensions" -msgstr "尺寸" - -msgid "Temperatures" -msgstr "溫度" - -msgid "Timestamps" -msgstr "時間戳記" - -#, boost-format -msgid "Specific for %1%" -msgstr "特定於 %1%" - -msgid "Presets" -msgstr "預設" - -msgid "Print settings" -msgstr "列印設定" - -msgid "Filament settings" -msgstr "線材設定" - -msgid "SLA Materials settings" -msgstr "SLA材料設定" - -msgid "Printer settings" -msgstr "列印設備設定" - -msgid "parameter name" -msgstr "參數名稱" - -#, c-format, boost-format -msgid "%s can't be percentage" -msgstr "%s 不可以是百分比" - -#, c-format, boost-format -msgid "Value %s is out of range, continue?" -msgstr "數值 %s 超出範圍，是否繼續？" - -msgid "Parameter validation" -msgstr "參數驗證" - -#, c-format, boost-format -msgid "Value %s is out of range. The valid range is from %d to %d." -msgstr "數值 %s 超出範圍。有效範圍是從 %d 到 %d。" - -msgid "Value is out of range." -msgstr "數值超出範圍。" - -#, possible-c-format, possible-boost-format -msgid "" -"Is it %s%% or %s %s?\n" -"YES for %s%%, \n" -"NO for %s %s." -msgstr "" -"是 %s%% 還是 %s %s？\n" -"選「是」代表 %s%%，\n" -"選「否」代表 %s %s。" - -#, possible-boost-format -msgid "" -"Invalid input format. Expected vector of dimensions in the following format: " -"\"%1%\"" -msgstr "輸入格式無效。預期的向量尺寸格式應為：\"%1%\" - -msgid "Input value is out of range" -msgstr "輸入值超出範圍" - -msgid "Some extension in the input is invalid" -msgstr "輸入的副檔名無效" - -#, boost-format -msgid "Invalid format. Expected vector format: \"%1%\"" -msgstr "無效格式，應該是 \"%1%\" 這種格式" - -msgid "Layer Height" -msgstr "層高" - -msgid "Line Width" -msgstr "線寬" - -msgid "Fan Speed" -msgstr "風扇速度" - -msgid "Temperature" -msgstr "溫度" - -msgid "Flow" -msgstr "流量" - -msgid "Tool" -msgstr "工具" - -msgid "Layer Time" -msgstr "層時間" - -#, fuzzy -msgid "Layer Time (log)" -msgstr "層時間（對數）" - -msgid "Height: " -msgstr "層高：" - -msgid "Width: " -msgstr "線寬：" - -msgid "Speed: " -msgstr "速度：" - -msgid "Flow: " -msgstr "擠出流量：" - -msgid "Layer Time: " -msgstr "層時間：" - -msgid "Fan: " -msgstr "風扇速度：" - -msgid "Temperature: " -msgstr "溫度：" - -msgid "Loading G-codes" -msgstr "載入 G-code 中" - -msgid "Generating geometry vertex data" -msgstr "正在產生幾何頂點數據" - -msgid "Generating geometry index data" -msgstr "正在產生幾何索引數據" - -msgid "Statistics of All Plates" -msgstr "所有列印板數據" - -msgid "Display" -msgstr "顯示" - -#, fuzzy -msgid "Flushed" -msgstr "廢料" - -msgid "Tower" -msgstr "塔" - -msgid "Total" -msgstr "總計" - -msgid "Total Estimation" -msgstr "總預估" - -msgid "Total time" -msgstr "總時間" - -msgid "Total cost" -msgstr "總成本" - -msgid "up to" -msgstr "達到" - -msgid "above" -msgstr "高於" - -msgid "from" -msgstr "從" - -msgid "Color Scheme" -msgstr "顏色方案" - -msgid "Time" -msgstr "時間" - -msgid "Percent" -msgstr "百分比" - -msgid "Used filament" -msgstr "使用的線材" - -msgid "Layer Height (mm)" -msgstr "層高（mm）" - -msgid "Line Width (mm)" -msgstr "線寬（mm）" - -msgid "Speed (mm/s)" -msgstr "速度（mm/s）" - -msgid "Fan Speed (%)" -msgstr "風扇速度（%）" - -msgid "Temperature (°C)" -msgstr "溫度（℃）" - -msgid "Volumetric flow rate (mm³/s)" -msgstr "體積流量（mm³/s）" - -msgid "Travel" -msgstr "空駛" - -msgid "Seams" -msgstr "縫" - -msgid "Retract" -msgstr "回抽" - -msgid "Unretract" -msgstr "裝填回抽" - -msgid "Filament Changes" -msgstr "線材更換" - -msgid "Wipe" -msgstr "擦拭" - -msgid "Options" -msgstr "選項" - -msgid "travel" -msgstr "空駛" - -msgid "Extruder" -msgstr "擠出機" - -msgid "Filament change times" -msgstr "更換線材次數" - -msgid "Cost" -msgstr "成本" - -msgid "Color change" -msgstr "顏色更換" - -msgid "Print" -msgstr "列印" - -msgid "Printer" -msgstr "列印設備" - -msgid "Custom g-code" -msgstr "自定義 g-code" - -msgid "ToolChange" -msgstr "ToolChange" - -msgid "Time Estimation" -msgstr "時間預估" - -msgid "Normal mode" -msgstr "普通模式" - -msgid "Total Filament" -msgstr "總線材量" - -msgid "Model Filament" -msgstr "模型線材量" - -msgid "Prepare time" -msgstr "準備時間" - -msgid "Model printing time" -msgstr "模型列印時間" - -msgid "Switch to silent mode" -msgstr "切換到靜音模式" - -msgid "Switch to normal mode" -msgstr "切換到普通模式" - -msgid "Variable layer height" -msgstr "可變層高" - -msgid "Adaptive" -msgstr "自適應" - -msgid "Quality / Speed" -msgstr "細節/速度" - -msgid "Smooth" -msgstr "平滑模式" - -msgid "Radius" -msgstr "半徑" - -msgid "Keep min" -msgstr "保留最小" - -msgid "Left mouse button:" -msgstr "滑鼠左鍵：" - -msgid "Add detail" -msgstr "減小層高" - -msgid "Right mouse button:" -msgstr "滑鼠右鍵：" - -msgid "Remove detail" -msgstr "增大層高" - -msgid "Shift + Left mouse button:" -msgstr "Shift + 滑鼠左鍵：" - -msgid "Reset to base" -msgstr "設定到基礎層高" - -msgid "Shift + Right mouse button:" -msgstr "Shift + 滑鼠右鍵：" - -msgid "Smoothing" -msgstr "平滑" - -msgid "Mouse wheel:" -msgstr "滑鼠滾輪：" - -msgid "Increase/decrease edit area" -msgstr "增加/減小編輯區域" - -msgid "Sequence" -msgstr "順序" - -msgid "Mirror Object" -msgstr "鏡像物體" - -msgid "Tool Move" -msgstr "工具 移動" - -msgid "Tool Rotate" -msgstr "工具 旋轉" - -msgid "Move Object" -msgstr "移動物件" - -msgid "Auto Orientation options" -msgstr "自動定向選項" - -msgid "Enable rotation" -msgstr "開啟旋轉" - -msgid "Optimize support interface area" -msgstr "最佳化接觸面面積" - -# src/slic3r/GUI/GLCanvas3D.cpp:4767 -msgid "Orient" -msgstr "調整定向" - -msgid "Arrange options" -msgstr "自動擺放選項" - -msgid "Spacing" -msgstr "間距" - -msgid "0 means auto spacing." -msgstr "0 表示自動間距。" - -msgid "Auto rotate for arrangement" -msgstr "自動旋轉以最佳化自動擺放效果" - -msgid "Allow multiple materials on same plate" -msgstr "允許同一列印板中包含多種材料" - -msgid "Avoid extrusion calibration region" -msgstr "避開擠出校準區域" - -msgid "Align to Y axis" -msgstr "與 Y 軸對齊" - -msgid "Add plate" -msgstr "新增列印板" - -msgid "Auto orient" -msgstr "自動定向" - -msgid "Arrange all objects" -msgstr "全域整理" - -#, fuzzy -msgid "Arrange objects on selected plates" -msgstr "單一列印板整理" - -msgid "Split to objects" -msgstr "拆分為物件" - -msgid "Split to parts" -msgstr "拆分為零件" - -msgid "Assembly View" -msgstr "組裝視角" - -msgid "Select Plate" -msgstr "選擇列印板" - -msgid "Assembly Return" -msgstr "退出組裝視角" - -msgid "return" -msgstr "返回" - -msgid "Paint Toolbar" -msgstr "上色工具列" - -msgid "Explosion Ratio" -msgstr "爆炸比例" - -msgid "Section View" -msgstr "剖面視圖" - -msgid "Assemble Control" -msgstr "拼裝視角控制" - -msgid "Total Volume:" -msgstr "總體積：" - -msgid "Assembly Info" -msgstr "裝配體資訊" - -msgid "Volume:" -msgstr "體積：" - -msgid "Size:" -msgstr "尺寸：" - -#, boost-format -msgid "" -"Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " -"separate the conflicted objects farther (%s <-> %s)." -msgstr "發現 gcode 路徑在 %d 層，高為 %.2lf mm 處的衝突。請將有衝突的物件分離得更遠（%s <-> %s）。" - -msgid "An object is layed over the boundary of plate." -msgstr "偵測到有物件放在列印板的邊界上。" - -msgid "A G-code path goes beyond the max print height." -msgstr "偵測到超出列印高度的 G-code 路徑。" - -msgid "A G-code path goes beyond the boundary of plate." -msgstr "偵測到超出熱床邊界的 G-code 路徑。" - -msgid "Only the object being edit is visible." -msgstr "只有正在編輯的物件是可見的。" - -msgid "" -"An object is laid over the boundary of plate or exceeds the height limit.\n" -"Please solve the problem by moving it totally on or off the plate, and " -"confirming that the height is within the build volume." -msgstr "物件被放置在列印板的邊界上或超過高度限制。\n" -"請將其完全移動到列印板內或列印板外，並確認高度在列印空間範圍以內來解決問題。" - -msgid "Calibration step selection" -msgstr "校準步驟選擇" - -msgid "Micro lidar calibration" -msgstr "微型雷射雷達校準" - -msgid "Bed leveling" -msgstr "熱床調平" - -msgid "Vibration compensation" -msgstr "共振補償" - -msgid "Motor noise cancellation" -msgstr "電機噪音消除" - -msgid "Calibration program" -msgstr "校準程序" - -msgid "" -"The calibration program detects the status of your device automatically to " -"minimize deviation.\n" -"It keeps the device performing optimally." -msgstr "" -"校準程序會自動檢測設備狀態以最小化偏差。\n" -"它確保設備保持最佳性能。" - -msgid "Calibration Flow" -msgstr "校準流程" - -msgid "Start Calibration" -msgstr "開始校準" - -msgid "Completed" -msgstr "已完成" - -msgid "Calibrating" -msgstr "校準中" - -msgid "No step selected" -msgstr "未選擇任何步驟" - -msgid "Auto-record Monitoring" -msgstr "監控錄影" - -msgid "Go Live" -msgstr "開啟直播" - -msgid "Liveview Retry" -msgstr "重新嘗試 Liveview" - -msgid "Resolution" -msgstr "解析度" - -msgid "Enable" -msgstr "開啟" - -msgid "Hostname or IP" -msgstr "主機名稱或 IP" - -msgid "Custom camera source" -msgstr "自訂相機來源" - -msgid "Show \"Live Video\" guide page." -msgstr "顯示\"直播影片\"引導。" - -msgid "720p" -msgstr "720p" - -msgid "1080p" -msgstr "1080p" - -msgid "ConnectPrinter(LAN)" -msgstr "連接列印設備（區域網路）" - -msgid "Please input the printer access code:" -msgstr "請輸入列印設備訪問碼：" - -msgid "" -"You can find it in \"Settings > Network > Connection code\"\n" -"on the printer, as shown in the figure:" -msgstr "" -"你可以在列印設備\"設置->網路->連接->訪問碼\"\n" -"查看，如下圖所示：" - -msgid "Invalid input." -msgstr "輸入無效。" - -msgid "New Window" -msgstr "新視窗" - -msgid "Open a new window" -msgstr "打開新視窗" - -msgid "Application is closing" -msgstr "正在關閉應用程式" - -msgid "Closing Application while some presets are modified." -msgstr "正在關閉應用程式，部分預設已修改。" - -msgid "Logging" -msgstr "日誌" - -msgid "Preview" -msgstr "預覽" - -msgid "Multi-device" -msgstr "多臺設備" - -msgid "Project" -msgstr "專案項目" - -msgid "Yes" -msgstr "是" - -msgid "No" -msgstr "否" - -msgid "will be closed before creating a new model. Do you want to continue?" -msgstr "將會被關閉以建立新模型，是否繼續?" - -msgid "Slice plate" -msgstr "切片單一列印板" - -msgid "Print plate" -msgstr "列印單一列印板" - -msgid "Slice all" -msgstr "切片所有列印板" - -msgid "Export G-code file" -msgstr "匯出 G-code 檔案" - -msgid "Export plate sliced file" -msgstr "匯出單一列印板切片檔案" - -msgid "Export all sliced file" -msgstr "匯出所有列印板切片檔案" - -msgid "Print all" -msgstr "列印所有列印板" - -msgid "Send all" -msgstr "傳送所有列印板" - -msgid "Keyboard Shortcuts" -msgstr "快捷鍵" - -msgid "Show the list of the keyboard shortcuts" -msgstr "顯示快捷鍵清單" - -msgid "Setup Wizard" -msgstr "設定精靈" - -msgid "Show Configuration Folder" -msgstr "打開設定檔的資料夾" - -msgid "Show Tip of the Day" -msgstr "顯示每日小提示" - -msgid "Check for Update" -msgstr "檢查新版本" - -msgid "Open Network Test" -msgstr "打開網路測試" - -#, c-format, boost-format -msgid "&About %s" -msgstr "關於 %s" - -msgid "Upload Models" -msgstr "上傳模型" - -msgid "Download Models" -msgstr "下載模型" - -msgid "Default View" -msgstr "默認視圖" - -#. TRN To be shown in the main menu View->Top -msgid "Top" -msgstr "頂部" - -msgid "Top View" -msgstr "頂部視圖" - -#. TRN To be shown in the main menu View->Bottom -msgid "Bottom" -msgstr "底部" - -msgid "Bottom View" -msgstr "底部視圖" - -msgid "Front" -msgstr "前面" - -msgid "Front View" -msgstr "前視圖" - -msgid "Rear" -msgstr "後面" - -msgid "Rear View" -msgstr "後視圖" - -msgid "Left" -msgstr "左面" - -msgid "Left View" -msgstr "左視圖" - -msgid "Right" -msgstr "右面" - -msgid "Right View" -msgstr "右視圖" - -msgid "Start a new window" -msgstr "打開新視窗" - -msgid "New Project" -msgstr "新建專案項目" - -msgid "Start a new project" -msgstr "新建一個專案項目" - -msgid "Open a project file" -msgstr "打開專案項目" - -msgid "Recent projects" -msgstr "最近的專案項目" - -msgid "Save Project" -msgstr "儲存專案項目" - -#, fuzzy -msgid "Save current project to file" -msgstr "儲存目前專案項目到檔案" - -msgid "Save Project as" -msgstr "另存專案項目為" - -msgid "Shift+" -msgstr "Shift+" - -msgid "Save current project as" -msgstr "將目前專案項目另存為" - -msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" -msgstr "匯入 3MF/STL/STEP/SVG/OBJ/AMF" - -msgid "Load a model" -msgstr "載入模型" - -msgid "Import Zip Archive" -msgstr "匯入壓縮檔" - -msgid "Load models contained within a zip archive" -msgstr "載入壓縮檔中的模型" - -msgid "Import Configs" -msgstr "匯入設定檔" - -msgid "Load configs" -msgstr "載入設定檔" - -msgid "Import" -msgstr "匯入" - -msgid "Export all objects as one STL" -msgstr "將所有物件匯出為一個 STL 檔案" - -msgid "Export all objects as STLs" -msgstr "將所有物件匯出為 STL 檔案" - -msgid "Export Generic 3MF" -msgstr "匯出通用 3MF" - -msgid "Export 3mf file without using some 3mf-extensions" -msgstr "匯出不含 3mf 擴展的 3mf 檔案" - -msgid "Export current sliced file" -msgstr "匯出目前已切片的檔案" - -msgid "Export all plate sliced file" -msgstr "匯出所有列印板已切片的檔案" - -msgid "Export G-code" -msgstr "匯出 G-code" - -msgid "Export current plate as G-code" -msgstr "匯出目前列印板的 G-code" - -msgid "Export Preset Bundle" -msgstr "匯出設定檔組" - -#, fuzzy -msgid "Export current configuration to files" -msgstr "匯出目前選擇的設定檔" - -msgid "Export" -msgstr "匯出" - -msgid "Quit" -msgstr "結束" - -msgid "Undo" -msgstr "復原" - -msgid "Redo" -msgstr "重做" - -msgid "Cut selection to clipboard" -msgstr "剪下所選項目到剪貼簿" - -msgid "Copy" -msgstr "複製" - -msgid "Copy selection to clipboard" -msgstr "複製所選項目到剪貼簿" - -msgid "Paste" -msgstr "貼上" - -msgid "Paste clipboard" -msgstr "從剪貼簿貼上" - -msgid "Delete selected" -msgstr "刪除所選項目" - -#, fuzzy -msgid "Deletes the current selection" -msgstr "刪除目前所選項目" - -msgid "Delete all" -msgstr "全部刪除" - -msgid "Deletes all objects" -msgstr "刪除所有物件" - -msgid "Clone selected" -msgstr "複製所選項目" - -msgid "Clone copies of selections" -msgstr "複製多份所選項目" - -msgid "Duplicate Current Plate" -msgstr "複製列印板" - -msgid "Duplicate the current plate" -msgstr "複製目前列印板" - -msgid "Select all" -msgstr "選取所有" - -msgid "Selects all objects" -msgstr "選取所有物件" - -msgid "Deselect all" -msgstr "取消所有選取" - -msgid "Deselects all objects" -msgstr "取消所有選取物件" - -msgid "Use Perspective View" -msgstr "使用透視視角" - -msgid "Use Orthogonal View" -msgstr "使用正交視角" - -msgid "Show &G-code Window" -msgstr "顯示 G-code" - -msgid "Show g-code window in Preview scene" -msgstr "在預覽分頁中顯示 G-code 視窗" - -msgid "Show 3D Navigator" -msgstr "顯示 3D 導覽器" - -msgid "Show 3D navigator in Prepare and Preview scene" -msgstr "在準備與預覽分頁中顯示 3D 導覽器" - -msgid "Reset Window Layout" -msgstr "重設視窗配置" - -msgid "Reset to default window layout" -msgstr "恢復預設視窗配置" - -msgid "Show &Labels" -msgstr "顯示名稱" - -msgid "Show object labels in 3D scene" -msgstr "在 3D 場景中顯示物件名稱" - -msgid "Show &Overhang" -msgstr "凸顯懸空" - -msgid "Show object overhang highlight in 3D scene" -msgstr "在 3D 場景中凸顯懸空" - -msgid "Show Selected Outline (Experimental)" -msgstr "顯示選取輪廓（實驗性）" - -msgid "Show outline around selected object in 3D scene" -msgstr "在 3D 場景中顯示選定物件的輪廓" - -msgid "Preferences" -msgstr "偏好設定" - -msgid "Help" -msgstr "幫助" - -msgid "Temperature Calibration" -msgstr "溫度校準" - -msgid "Pass 1" -msgstr "粗調" - -msgid "Flow rate test - Pass 1" -msgstr "流量測試 - 通過 1" - -msgid "Pass 2" -msgstr "細調" - -msgid "Flow rate test - Pass 2" -msgstr "流量測試 - 通過 2" - -msgid "YOLO (Recommended)" -msgstr "YOLO (建議)" - -msgid "Orca YOLO flowrate calibration, 0.01 step" -msgstr "Orca YOLO 流量校正，0.01 步" - -msgid "YOLO (perfectionist version)" -msgstr "YOLO (完美主義者模式)" - -msgid "Orca YOLO flowrate calibration, 0.005 step" -msgstr "Orca YOLO 流量校正，0.005 步" - -msgid "Flow rate" -msgstr "流量" - -msgid "Pressure advance" -msgstr "壓力提前" - -msgid "Retraction test" -msgstr "回抽測試" - -msgid "Orca Tolerance Test" -msgstr "Orca 誤差測試" - -msgid "Max flowrate" -msgstr "最大體積流量" - -msgid "VFA" -msgstr "VFA" - -# SoftFever -msgid "More..." -msgstr "更多…" - -msgid "Tutorial" -msgstr "教學" - -msgid "Calibration help" -msgstr "校準幫助" - -msgid "More calibrations" -msgstr "更多校準" - -msgid "&Open G-code" -msgstr "打開 G-code" - -msgid "Open a G-code file" -msgstr "打開 G-code 檔案" - -msgid "Re&load from Disk" -msgstr "從磁碟重新載入" - -msgid "Reload the plater from disk" -msgstr "從磁碟重新載入" - -msgid "Export &Toolpaths as OBJ" -msgstr "將工具路徑匯出為 OBJ 格式" - -msgid "Export toolpaths as OBJ" -msgstr "將工具路徑匯出為 OBJ 格式" - -msgid "Open &Slicer" -msgstr "開啟 Studio" - -msgid "Open Slicer" -msgstr "開啟 Studio" - -msgid "&Quit" -msgstr "離開" - -#, c-format, boost-format -msgid "Quit %s" -msgstr "離開 %s" - -msgid "&File" -msgstr "檔案" - -msgid "&View" -msgstr "視角" - -msgid "&Help" -msgstr "幫助" - -#, c-format, boost-format -msgid "A file exists with the same name: %s, do you want to override it." -msgstr "有一個同名稱的檔案 %s。要覆蓋它嗎？" - -#, c-format, boost-format -msgid "A config exists with the same name: %s, do you want to override it." -msgstr "有一個同名稱的設定檔 %s。要覆蓋它嗎？" - -msgid "Overwrite file" -msgstr "覆蓋檔案" - -msgid "Yes to All" -msgstr "全部覆蓋" - -msgid "No to All" -msgstr "全部放棄" - -msgid "Choose a directory" -msgstr "選擇目錄" - -#, c-format, boost-format -msgid "There is %d config exported. (Only non-system configs)" -msgid_plural "There are %d configs exported. (Only non-system configs)" -msgstr[0] "共匯出 %d 組預設檔（僅包含目前使用的非系統的預設檔）" -msgstr[1] "共匯出 %d 組預設檔（僅包含目前使用的非系統的預設檔）" - -msgid "Export result" -msgstr "匯出結果" - -msgid "Select profile to load:" -msgstr "選擇要載入的設定檔：" - -##, possible-c-format, possible-boost-format -msgid "There is %d config imported. (Only non-system and compatible configs)" -msgid_plural "" -"There are %d configs imported. (Only non-system and compatible configs)" -msgstr[0] "共匯入 %d 組預設檔（僅包含非系統且與目前配置相容的預設檔）" -msgstr[1] "" - -msgid "" -"\n" -"Hint: Make sure you have added the corresponding printer before importing " -"the configs." -msgstr "" -"\n" -"提示：在匯入設定之前，請確保已添加對應的列印設備。" - -msgid "Import result" -msgstr "匯入結果" - -msgid "File is missing" -msgstr "檔案遺失" - -msgid "The project is no longer available." -msgstr "此項目不可用。" - -msgid "Filament Settings" -msgstr "線材設定" - -msgid "" -"Do you want to synchronize your personal data from Bambu Cloud? \n" -"It contains the following information:\n" -"1. The Process presets\n" -"2. The Filament presets\n" -"3. The Printer presets" -msgstr "從 Bambu 雲端同步你的個人數據嗎？\n" -"包含以下資訊：\n" -"1. 列印參數設定\n" -"2. 線材設定\n" -"3. 列印設備設定" - -msgid "Synchronization" -msgstr "同步" - -msgid "The device cannot handle more conversations. Please retry later." -msgstr "" - -msgid "Player is malfunctioning. Please reinstall the system player." -msgstr "播放器故障。請重新安裝系統播放器。" - -msgid "The player is not loaded, please click \"play\" button to retry." -msgstr "播放器未載入，請點擊「播放」按鈕重試。" - -msgid "Please confirm if the printer is connected." -msgstr "請確認列印設備是否已連接。" - -msgid "" -"The printer is currently busy downloading. Please try again after it " -"finishes." -msgstr "列印機目前正忙於下載。請待下載完成後再試一次。" - -msgid "Printer camera is malfunctioning." -msgstr "列印設備攝影機故障。" - -msgid "Problem occurred. Please update the printer firmware and try again." -msgstr "發生問題。請更新列印設備韌體後再試一次。" - -msgid "" -"LAN Only Liveview is off. Please turn on the liveview on printer screen." -msgstr "僅 LAN 模式的 LiveView 已關閉。請在列印機螢幕上開啟 LiveView。" - -msgid "Please enter the IP of printer to connect." -msgstr "請輸入列印設備的 IP 以進行連接。" - -msgid "Initializing..." -msgstr "正在初始化..." - -msgid "Connection Failed. Please check the network and try again" -msgstr "連線失敗。請檢查網路並重試" - -msgid "" -"Please check the network and try again, You can restart or update the " -"printer if the issue persists." -msgstr "請檢查網路並重試。如果問題持續，你可以重新啟動或更新列印設備。" - -msgid "The printer has been logged out and cannot connect." -msgstr "列印設備已登出，無法連接。" - -msgid "Stopped." -msgstr "已經停止。" - -msgid "LAN Connection Failed (Failed to start liveview)" -msgstr "區域網路連接失敗（無法啟動 Liveview）" - -msgid "" -"Virtual Camera Tools is required for this task!\n" -"Do you want to install them?" -msgstr "" -"執行此功能需要「虛擬攝影機工具包」！\n" -"您要安裝它們嗎？" - -#, fuzzy -msgid "Downloading Virtual Camera Tools" -msgstr "正在下載虛擬攝影機工具包..." - -msgid "" -"Another virtual camera is running.\n" -"Orca Slicer supports only a single virtual camera.\n" -"Do you want to stop this virtual camera?" -msgstr "" -"另一個虛擬攝影機正在工作。\n" -"Orca Slicer 同時只能支援一個虛擬攝影機。\n" -"是否停止前一個虛擬攝影機？" - -#, possible-c-format, possible-boost-format -msgid "Virtual camera initialize failed (%s)!" -msgstr "虛擬攝影機初始化失敗（%s）！" - -msgid "Network unreachable" -msgstr "網路不可存取" - -msgid "Information" -msgstr "資訊" - -msgid "Playing..." -msgstr "正在播放中……" - -msgid "Year" -msgstr "年" - -msgid "Month" -msgstr "月" - -msgid "All Files" -msgstr "所有檔案" - -msgid "Group files by year, recent first." -msgstr "按年份分組，從最近的開始展示。" - -msgid "Group files by month, recent first." -msgstr "按月份分組，從最近的開始展示。" - -msgid "Show all files, recent first." -msgstr "顯示所有檔案，從最近的開始展示。" - -msgid "Switch to timelapse files." -msgstr "切換到縮時攝影檔案清單。" - -msgid "Video" -msgstr "錄影" - -msgid "Switch to video files." -msgstr "切換到影片檔案清單。" - -msgid "Switch to 3mf model files." -msgstr "切換到 3mf 模型檔案。" - -msgid "Delete selected files from printer." -msgstr "從列印設備中刪除選中的檔案。" - -msgid "Download" -msgstr "下載" - -msgid "Download selected files from printer." -msgstr "從列印設備中下載選中的檔案。" - -msgid "Select" -msgstr "選擇" - -msgid "Batch manage files." -msgstr "批次管理檔案。" - -msgid "Refresh" -msgstr "刷新" - -msgid "Reload file list from printer." -msgstr "從列印機重新載入檔案清單。" - -#, fuzzy -msgid "No printers." -msgstr "未選擇列印設備" - -#, c-format, boost-format -msgid "Connect failed [%d]!" -msgstr "連接失敗 [%d]！" - -msgid "Loading file list..." -msgstr "載入檔案清單..." - -msgid "No files" -msgstr "無檔案" - -msgid "Load failed" -msgstr "載入失敗" - -msgid "Initialize failed (Device connection not ready)!" -msgstr "初始化失敗（未連接列印設備）" - -msgid "" -"Browsing file in SD card is not supported in current firmware. Please update " -"the printer firmware." -msgstr "目前韌體不支援瀏覽 SD 卡中的檔案。請更新列印機韌體。" - -msgid "Initialize failed (Storage unavailable, insert SD card.)!" -msgstr "初始化失敗（存儲不可用，請插入 SD 卡）！" - -msgid "LAN Connection Failed (Failed to view sdcard)" -msgstr "LAN 連線失敗（無法查看 SD 卡）。" - -msgid "Browsing file in SD card is not supported in LAN Only Mode." -msgstr "在僅 LAN 模式下不支援瀏覽 SD 卡中的檔案。" - -#, possible-c-format, possible-boost-format -msgid "Initialize failed (%s)!" -msgstr "初始化失敗（%s）!" - -#, possible-c-format, possible-boost-format -msgid "You are going to delete %u file from printer. Are you sure to continue?" -msgid_plural "" -"You are going to delete %u files from printer. Are you sure to continue?" -msgstr[0] "將從列印設備中刪除 %u 個檔案。確定要繼續嗎？" -msgstr[1] "將從列印設備中刪除 %u 個檔案。確定要繼續嗎？" - -msgid "Delete files" -msgstr "刪除檔案" - -#, c-format, boost-format -msgid "Do you want to delete the file '%s' from printer?" -msgstr "確定要從列印設備中刪除檔案 '%s' 嗎？" - -msgid "Delete file" -msgstr "刪除檔案" - -msgid "Fetching model information..." -msgstr "正在獲取模型資訊..." - -msgid "Failed to fetch model information from printer." -msgstr "無法從列印設備獲取模型資訊。" - -msgid "Failed to parse model information." -msgstr "解析模型資訊失敗。" - -msgid "" -"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer " -"and export a new .gcode.3mf file." -msgstr "" -".gcode.3mf 檔案中不包含 G-code 數據。請使用 Orca Slicer 進行切片並匯出新的 .gcode.3mf 檔案。" - -#, possible-c-format, possible-boost-format -msgid "File '%s' was lost! Please download it again." -msgstr "檔案 %s 遺失，請重新下載。" - -#, possible-c-format, possible-boost-format -msgid "" -"File: %s\n" -"Title: %s\n" -msgstr "" -"檔案：%s\n" -"標題：%s\n" - -msgid "Download waiting..." -msgstr "等待下載中..." - -msgid "Play" -msgstr "播放" - -msgid "Open Folder" -msgstr "打開資料夾" - -msgid "Download finished" -msgstr "下載完成" - -#, possible-c-format, possible-boost-format -msgid "Downloading %d%%..." -msgstr "下載中 %d%%..." - -msgid "" -"Reconnecting the printer, the operation cannot be completed immediately, " -"please try again later." -msgstr "重新連接列印機，操作無法立即完成，請稍後再試。" - -msgid "File does not exist." -msgstr "檔案不存在。" - -msgid "File checksum error. Please retry." -msgstr "檔案核對和錯誤。請重試。" - -msgid "Not supported on the current printer version." -msgstr "目前列印設備的版本不支援。" - -msgid "Storage unavailable, insert SD card." -msgstr "無儲存空間，請插入 SD 記憶卡。" - -#, c-format, boost-format -msgid "Error code: %d" -msgstr "錯誤代碼：%d" - -msgid "Speed:" -msgstr "速度：" - -#, fuzzy -msgid "Deadzone:" -msgstr "盲點區：" - -msgid "Options:" -msgstr "選項：" - -msgid "Zoom" -msgstr "視角縮放" - -msgid "Translation/Zoom" -msgstr "平移/縮放" - -msgid "3Dconnexion settings" -msgstr "3Dconnexion 設定" - -msgid "Swap Y/Z axes" -msgstr "交換 Y/Z 軸" - -msgid "Invert X axis" -msgstr "反轉 X 軸" - -msgid "Invert Y axis" -msgstr "反轉 Y 軸" - -msgid "Invert Z axis" -msgstr "反轉 Z 軸" - -msgid "Invert Yaw axis" -msgstr "反轉偏航軸（垂直軸）" - -msgid "Invert Pitch axis" -msgstr "反轉俯仰軸（橫軸）" - -msgid "Invert Roll axis" -msgstr "反轉橫滾軸（縱軸）" - -msgid "Printing Progress" -msgstr "列印進度" - -msgid "0" -msgstr "0" - -msgid "Layer: N/A" -msgstr "層： N/A" - -msgid "Clear" -msgstr "清除" - -msgid "" -"You have completed printing the mall model, \n" -"but the synchronization of rating information has failed." -msgstr "已經完成了 MakeWorld 模型的列印，但評論資料同步失敗。" - -msgid "How do you like this printing file?" -msgstr "你覺得這個列印檔案怎麼樣？" - -#, fuzzy -msgid "" -"(The model has already been rated. Your rating will overwrite the previous " -"rating.)" -msgstr "（此模型已被評價。你的評價將覆蓋先前的評價。）" - -msgid "Rate" -msgstr "速率" - -msgid "Camera" -msgstr "攝影機" - -msgid "SD Card" -msgstr "SD 記憶卡" - -msgid "Camera Setting" -msgstr "攝影機設定" - -msgid "Switch Camera View" -msgstr "切換相機視角" - -msgid "Control" -msgstr "控制" - -msgid "Printer Parts" -msgstr "" - -msgid "Print Options" -msgstr "列印選項" - -msgid "100%" -msgstr "100%" - -msgid "Lamp" -msgstr "LED 燈" - -msgid "Aux" -msgstr "輔助" - -msgid "Cham" -msgstr "機箱" - -msgid "Bed" -msgstr "熱床" - -msgid "Debug Info" -msgstr "除錯資訊" - -msgid "No SD Card" -msgstr "無 SD 記憶卡" - -msgid "SD Card Abnormal" -msgstr "SD 記憶卡異常" - -msgid "Cancel print" -msgstr "取消列印" - -msgid "Are you sure you want to cancel this print?" -msgstr "確定要取消這次列印嗎？" - -msgid "Downloading..." -msgstr "下載中..." - -msgid "Cloud Slicing..." -msgstr "雲端切片中..." - -#, c-format, boost-format -msgid "In Cloud Slicing Queue, there are %s tasks ahead." -msgstr "雲端切片佇列中，前面還有 %s 個檔案。" - -#, c-format, boost-format -msgid "Layer: %s" -msgstr "%s 層" - -#, c-format, boost-format -msgid "Layer: %d/%d" -msgstr "%d/%d 層" - -msgid "" -"Please heat the nozzle to above 170 degree before loading or unloading " -"filament." -msgstr "請在上料或退料之前將噴嘴加熱至 170 度以上。" - -msgid "Still unload" -msgstr "繼續退料" - -msgid "Still load" -msgstr "繼續進料" - -msgid "Please select an AMS slot before calibration" -msgstr "請先選擇一個 AMS 槽位後進行校準" - -msgid "" -"Cannot read filament info: the filament is loaded to the tool head,please " -"unload the filament and try again." -msgstr "無法讀取線材資訊：線材已經載入到工具頭，請退出線材後再重試。" - -msgid "This only takes effect during printing" -msgstr "僅在列印過程中生效" - -msgid "Silent" -msgstr "靜音模式（50%）" - -msgid "Standard" -msgstr "標準模式（100%）" - -msgid "Sport" -msgstr "運動模式（125%）" - -msgid "Ludicrous" -msgstr "狂暴模式（150%）" - -msgid "Can't start this without SD card." -msgstr "沒有 SD 記憶卡無法開始。" - -msgid "Rate the Print Profile" -msgstr "評價列印設定檔" - -msgid "Comment" -msgstr "評論" - -msgid "Rate this print" -msgstr "評價這個印刷品" - -msgid "Add Photo" -msgstr "新增照片" - -msgid "Delete Photo" -msgstr "刪除照片" - -msgid "Submit" -msgstr "送出" - -msgid "Please click on the star first." -msgstr "請先點擊星星數量。" - -msgid "InFo" -msgstr "資訊" - -msgid "Get oss config failed." -msgstr "取得 oss 設定失敗。" - -msgid "Upload Pictures" -msgstr "上傳圖片" - -msgid "Number of images successfully uploaded" -msgstr "成功上傳的圖片數量" - -msgid " upload failed" -msgstr " 上傳失敗" - -#, fuzzy -msgid " upload config prase failed\n" -msgstr " 上傳設定檔失敗\n" - -msgid " No corresponding storage bucket\n" -msgstr " 沒有對應的儲存區\n" - -msgid " can not be opened\n" -msgstr " 無法開啟\n" - -msgid "" -"The following issues occurred during the process of uploading images. Do you " -"want to ignore them?\n" -"\n" -msgstr "" -"在上傳圖片的過程中出現了以下問題。要忽略此問題嗎？\n" -"\n" - -msgid "info" -msgstr "資訊" - -msgid "Synchronizing the printing results. Please retry a few seconds later." -msgstr "正在同步列印結果。請稍後重試。" - -msgid "Upload failed\n" -msgstr "上傳失敗\n" - -msgid "obtaining instance_id failed\n" -msgstr "取得 instance_id 失敗\n" - -msgid "" -"Your comment result cannot be uploaded due to some reasons. As follows:\n" -"\n" -" error code: " -msgstr "" -"由於某些原因，你的評論結果無法上傳。如下：\n" -"\n" -" 錯誤代碼： " - -msgid "error message: " -msgstr "錯誤訊息：" - -msgid "" -"\n" -"\n" -"Would you like to redirect to the webpage for rating?" -msgstr "" -"\n" -"\n" -"您想要跳轉到網頁給予評分嗎？" - -msgid "" -"Some of your images failed to upload. Would you like to redirect to the " -"webpage for rating?" -msgstr "你的部分圖片上傳失敗。 要重定導向評價網頁嗎？" - -msgid "You can select up to 16 images." -msgstr "你最多可以選擇 16 張圖片。" - -msgid "" -"At least one successful print record of this print profile is required \n" -"to give a positive rating(4 or 5stars)." -msgstr "" -"若要給予正面評價（4 或 5 星），\n" -"必須至少有一個此列印設定檔的成功列印記錄。" - -msgid "Status" -msgstr "設備狀態" - -msgid "Update" -msgstr "韌體更新" - -msgid "Don't show again" -msgstr "不再顯示" - -#, c-format, boost-format -msgid "%s error" -msgstr "%s 錯誤" - -#, c-format, boost-format -msgid "%s has encountered an error" -msgstr "%s 遇到一個錯誤" - -#, c-format, boost-format -msgid "%s warning" -msgstr "%s 警告" - -#, c-format, boost-format -msgid "%s has a warning" -msgstr "%s 有一個警告" - -#, c-format, boost-format -msgid "%s info" -msgstr "%s 資訊" - -#, c-format, boost-format -msgid "%s information" -msgstr "%s 資訊" - -msgid "Skip" -msgstr "跳過" - -msgid "Newer 3mf version" -msgstr "較新的 3mf 版本" - -msgid "" -"The 3mf file version is in Beta and it is newer than the current OrcaSlicer " -"version." -msgstr "該 3mf 檔案版本為測試版，並且較目前的 OrcaSlicer 版本更新。" - -msgid "If you would like to try Orca Slicer Beta, you may click to" -msgstr "如果你想嘗試 Orca Slicer 測試版，可以點擊以下載到" - -msgid "Download Beta Version" -msgstr "下載測試版" - -msgid "The 3mf file version is newer than the current Orca Slicer version." -msgstr "該 3mf 檔案版本較目前的 Orca Slicer 版本更新。" - -msgid "Update your Orca Slicer could enable all functionality in the 3mf file." -msgstr "更新你的 Orca Slicer 以啟用 3mf 檔案中的所有功能。" - -msgid "Current Version: " -msgstr "目前版本：" - -msgid "Latest Version: " -msgstr "最新版本：" - -msgid "Not for now" -msgstr "現在不要" - -#, fuzzy -msgid "3D Mouse disconnected." -msgstr "3D 滑鼠已中斷連線。" - -#, fuzzy -msgid "Configuration can update now." -msgstr "設定檔現在可以升級。" - -msgid "Detail." -msgstr "詳細。" - -msgid "Integration was successful." -msgstr "整合成功。" - -msgid "Integration failed." -msgstr "整合失敗。" - -msgid "Undo integration was successful." -msgstr "整合取消成功。" - -msgid "New network plug-in available." -msgstr "網路插件有可用的更新。" - -msgid "Details" -msgstr "詳細" - -msgid "New printer config available." -msgstr "有新的列印機設定可用。" - -msgid "Wiki" -msgstr "Wiki" - -msgid "Undo integration failed." -msgstr "整合取消失敗。" - -msgid "Exporting." -msgstr "正在匯出。" - -msgid "Software has New version." -msgstr "發現新的軟體版本。" - -msgid "Goto download page." -msgstr "前往下載網站。" - -msgid "Open Folder." -msgstr "打開資料夾。" - -msgid "Safely remove hardware." -msgstr "安全移除硬體。" - -#, possible-c-format, possible-boost-format -msgid "%1$d Object has custom supports." -msgid_plural "%1$d Objects have custom supports." -msgstr[0] "%1$d 物件有自訂支撐。" -msgstr[1] "%1$d 物件有自訂支撐。" - -#, possible-c-format, possible-boost-format -msgid "%1$d Object has color painting." -msgid_plural "%1$d Objects have color painting." -msgstr[0] "%1$d 物件有上色。" -msgstr[1] "%1$d 物件有上色。" - -#, possible-c-format, possible-boost-format -msgid "%1$d object was loaded as a part of cut object." -msgid_plural "%1$d objects were loaded as parts of cut object" -msgstr[0] "%1$d 物件載入為一個切割物件的子零件。" -msgstr[1] "%1$d 物件載入為一個切割物件的子零件。" - -msgid "ERROR" -msgstr "錯誤" - -msgid "COMPLETED" -msgstr "已完成" - -msgid "CANCELED" -msgstr "已取消" - -msgid "Cancel upload" -msgstr "取消上傳" - -msgid "Jump to" -msgstr "轉換到" - -msgid "Error:" -msgstr "錯誤：" - -msgid "Warning:" -msgstr "警告：" - -msgid "Export successfully." -msgstr "匯出成功。" - -msgid "Model file downloaded." -msgstr "模型檔案已下載。" - -msgid "Serious warning:" -msgstr "嚴重警告：" - -msgid " (Repair)" -msgstr "（修復）" - -msgid " Click here to install it." -msgstr "點擊此處安裝。" - -msgid "WARNING:" -msgstr "警告：" - -msgid "Your model needs support ! Please make support material enable." -msgstr "你的模型需要支撐才能列印。請開啟支撐選項。" - -msgid "Gcode path overlap" -msgstr "Gcode 路徑有重疊" - -msgid "Support painting" -msgstr "支撐繪製" - -msgid "Color painting" -msgstr "上色" - -msgid "Cut connectors" -msgstr "切割連接件" - -msgid "Layers" -msgstr "層" - -msgid "Range" -msgstr "範圍" - -msgid "" -"The application cannot run normally because OpenGL version is lower than " -"2.0.\n" -msgstr "應用程式無法正常運行，因為 OpenGL 的版本低於 2.0。\n" - -msgid "Please upgrade your graphics card driver." -msgstr "請升級你的顯示卡驅動。" - -msgid "Unsupported OpenGL version" -msgstr "不支援的 OpenGL 版本" - -#, possible-c-format, possible-boost-format -msgid "" -"Unable to load shaders:\n" -"%s" -msgstr "" -"無法載入 Shader：\n" -"%s" - -msgid "Error loading shaders" -msgstr "載入 shader 程序時發生錯誤" - -msgctxt "Layers" -msgid "Top" -msgstr "頂部" - -msgctxt "Layers" -msgid "Bottom" -msgstr "底部" - -msgid "Enable AI monitoring of printing" -msgstr "啟用列印過程的 AI 智慧監控" - -msgid "Sensitivity of pausing is" -msgstr "暫停的靈敏度為" - -msgid "Enable detection of build plate position" -msgstr "啟用列印板位置偵測" - -msgid "" -"The localization tag of build plate is detected, and printing is paused if " -"the tag is not in predefined range." -msgstr "偵測列印板的定位標記，如果標記不在預定義範圍內時暫停列印。" - -#, fuzzy -msgid "First Layer Inspection" -msgstr "首層檢查" - -msgid "Auto-recovery from step loss" -msgstr "自動從丟步中恢復" - -msgid "Allow Prompt Sound" -msgstr "允許提示音效" - -msgid "Filament Tangle Detect" -msgstr "線材打結偵測" - -msgid "Nozzle Clumping Detection" -msgstr "噴嘴堵塞偵測" - -msgid "Check if the nozzle is clumping by filament or other foreign objects." -msgstr "檢查噴嘴是否因線材或其他異物而堵塞。" - -msgid "Nozzle Type" -msgstr "噴嘴類型" - -msgid "Stainless Steel" -msgstr "不鏽鋼" - -msgid "Hardened Steel" -msgstr "硬化鋼" - -#, c-format, boost-format -msgid "%.1f" -msgstr "" - -msgid "Global" -msgstr "全域" - -msgid "Objects" -msgstr "物件" - -msgid "Advance" -msgstr "高級" - -msgid "Compare presets" -msgstr "比較設定" - -msgid "View all object's settings" -msgstr "查看所有物件的設定" - -msgid "Material settings" -msgstr "材料設定" - -msgid "Remove current plate (if not last one)" -msgstr "刪除目前列印板（如果不是最後一個）" - -msgid "Auto orient objects on current plate" -msgstr "自動轉向列印板上物件" - -msgid "Arrange objects on current plate" -msgstr "自動擺放列印板上物件" - -msgid "Unlock current plate" -msgstr "解鎖列印板" - -msgid "Lock current plate" -msgstr "鎖定列印板" - -msgid "Edit current plate name" -msgstr "編輯列印板名稱" - -msgid "Move plate to the front" -msgstr "更改列印板順序至前" - -#, fuzzy -msgid "Customize current plate" -msgstr "自訂列印板參數" - -#, boost-format -msgid " plate %1%:" -msgstr "列印板 %1%：" - -msgid "Invalid name, the following characters are not allowed:" -msgstr "無效名稱，不允許使用以下字元：" - -msgid "Sliced Info" -msgstr "切片資訊" - -msgid "Used Filament (m)" -msgstr "線材消耗長度（m）" - -msgid "Used Filament (mm³)" -msgstr "線材消耗體積（mm³）" - -msgid "Used Filament (g)" -msgstr "線材消耗重量（g）" - -msgid "Used Materials" -msgstr "線材消耗" - -msgid "Estimated time" -msgstr "預估列印時間" - -msgid "Filament changes" -msgstr "線材切換" - -#, fuzzy -msgid "Click to edit preset" -msgstr "點擊編輯預設檔設定" - -msgid "Connection" -msgstr "連接" - -msgid "Bed type" -msgstr "列印板類型" - -msgid "Flushing volumes" -msgstr "廢料體積" - -msgid "Add one filament" -msgstr "增加一個線材" - -msgid "Remove last filament" -msgstr "刪除最後一個線材" - -msgid "Synchronize filament list from AMS" -msgstr "從 AMS 同步線材清單" - -msgid "Set filaments to use" -msgstr "設定可選擇的線材" - -msgid "Search plate, object and part." -msgstr "搜尋列印板、物件和零件。" - -msgid "Pellets" -msgstr "顆粒" - -msgid "" -"No AMS filaments. Please select a printer in 'Device' page to load AMS info." -msgstr "沒有發現 AMS 線材。請在\"設備\"頁面選擇列印設備，載入 AMS 資訊。" - -msgid "Sync filaments with AMS" -msgstr "同步到 AMS 的線材清單" - -msgid "" -"Sync filaments with AMS will drop all current selected filament presets and " -"colors. Do you want to continue?" -msgstr "同步 AMS 的線材資訊將會刪除所有目前設定的線材設定與顏色。確定要繼續嗎？" - -msgid "" -"Already did a synchronization, do you want to sync only changes or resync " -"all?" -msgstr "已經同步過，你希望僅同步改變的線材還是重新同步所有線材？" - -msgid "Sync" -msgstr "僅同步改變的" - -msgid "Resync" -msgstr "重新同步所有" - -msgid "There are no compatible filaments, and sync is not performed." -msgstr "沒有任何相容的線材，同步操作未執行。" - -msgid "" -"There are some unknown filaments mapped to generic preset. Please update " -"Orca Slicer or restart Orca Slicer to check if there is an update to system " -"presets." -msgstr "有一些未知型號的線材套用於通用預設上。請更新或者重啟 Orca Slicer，以檢查系統預設檔有無更新。" - -#, possible-boost-format -msgid "Do you want to save changes to \"%1%\"?" -msgstr "是否儲存變更到 \"%1%\"？" - -#, possible-c-format, possible-boost-format -msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." -msgstr "卸載成功。設備 %s(%s) 現在可以安全移除。" - -#, possible-c-format, possible-boost-format -msgid "Ejecting of device %s(%s) has failed." -msgstr "退出設備 %s（%s）失敗。" - -msgid "Previous unsaved project detected, do you want to restore it?" -msgstr "偵測到有未儲存的專案，是否恢復此專案？" - -msgid "Restore" -msgstr "恢復" - -msgid "" -"The current hot bed temperature is relatively high. The nozzle may be " -"clogged when printing this filament in a closed enclosure. Please open the " -"front door and/or remove the upper glass." -msgstr "" -"目前熱床溫度比較高。在封閉的列印設備中列印該線材時，噴嘴可能會堵塞。" -"請打開前門和/或拆下上部玻璃。" - -msgid "" -"The nozzle hardness required by the filament is higher than the default " -"nozzle hardness of the printer. Please replace the hardened nozzle or " -"filament, otherwise, the nozzle will be attrited or damaged." -msgstr "" -"線材所要求的噴嘴硬度高於列印設備預設的噴嘴硬度。" -"請更換硬化噴嘴或線材，否則噴嘴可能被磨損或損壞。" - -msgid "" -"Enabling traditional timelapse photography may cause surface imperfections. " -"It is recommended to change to smooth mode." -msgstr "使用傳統模式的縮時攝影可能會導致表面缺陷。建議改為平滑模式。" - -msgid "Expand sidebar" -msgstr "展開側邊欄" - -msgid "Collapse sidebar" -msgstr "折疊側邊欄" - -#, possible-c-format, possible-boost-format -msgid "Loading file: %s" -msgstr "載入檔案：%s" - -msgid "The 3mf is not supported by OrcaSlicer, load geometry data only." -msgstr "該 3mf 檔案不是來自 Orca Slicer，將只載入幾何數據。" - -msgid "Load 3mf" -msgstr "載入 3mf" - -#, possible-c-format, possible-boost-format -msgid "" -"The 3mf's version %s is newer than %s's version %s, Found following keys " -"unrecognized:" -msgstr "該 3mf 的版本 %s 比 %s 的版本 %s 新，以下參數值無法識別：" - -msgid "You'd better upgrade your software.\n" -msgstr "建議升級你的軟體版本。\n" - -#, possible-c-format, possible-boost-format -msgid "" -"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your " -"software." -msgstr "該 3mf 的版本 %s 比 %s 的版本 %s 要新，建議升級你的軟體。" - -msgid "Invalid values found in the 3mf:" -msgstr "在 3mf 檔案中發現無效值：" - -#, fuzzy -msgid "Please correct them in the param tabs" -msgstr "請在參數設定頁更正它們" - -msgid "The 3mf has following modified G-codes in filament or printer presets:" -msgstr "該 3mf 檔案在耗材或列印機預設中具有以下修改過的 GCODE：" - -msgid "" -"Please confirm that these modified G-codes are safe to prevent any damage to " -"the machine!" -msgstr "請確認這些修改過的 GCODE 是安全的，以防止對機器造成任何損壞！" - -msgid "Modified G-codes" -msgstr "已修改的 GCODE" - -msgid "The 3mf has following customized filament or printer presets:" -msgstr "該 3mf 檔案具有以下自訂的耗材或列印機預設：" - -msgid "" -"Please confirm that the G-codes within these presets are safe to prevent any " -"damage to the machine!" -msgstr "請確認這些預設中的 G-code 是安全的，以防止對機器造成損壞！" - -msgid "Customized Preset" -msgstr "自訂預設" - -msgid "Name of components inside step file is not UTF8 format!" -msgstr "step 檔案內部元件的名稱不是 UTF8 格式" - -msgid "The name may show garbage characters!" -msgstr "此名稱可能顯示亂碼字元！" - -msgid "Remember my choice." -msgstr "記住我的選擇。" - -#, boost-format -msgid "Failed loading file \"%1%\". An invalid configuration was found." -msgstr "載入檔案 \"%1%\" 失敗。發現無效設定值。" - -msgid "Objects with zero volume removed" -msgstr "體積為零的物件已被移除" - -msgid "The volume of the object is zero" -msgstr "物件的體積為零" - -#, possible-c-format, possible-boost-format -msgid "" -"The object from file %s is too small, and maybe in meters or inches.\n" -" Do you want to scale to millimeters?" -msgstr "" -"文件 %s 中的物件太小，可能以公尺（M）或英吋（Inches）為單位。\n" -"是否要轉換成毫米（mm）？" - -msgid "Object too small" -msgstr "物件尺寸過小" - -msgid "" -"This file contains several objects positioned at multiple heights.\n" -"Instead of considering them as multiple objects, should \n" -"the file be loaded as a single object having multiple parts?" -msgstr "" -"該檔案包含多個位於不同高度的物件。\n" -"是否將檔案載入為一個由多個零件組合而成的物件，而非多個單零件的物件？" - -msgid "Multi-part object detected" -msgstr "偵測到多部分物件" - -msgid "Load these files as a single object with multiple parts?\n" -msgstr "將這些檔案載入為一個多零件物件？\n" - -msgid "Object with multiple parts was detected" -msgstr "偵測到多零件物件" - -msgid "The file does not contain any geometry data." -msgstr "此檔案不包含任何幾何數據。" - -msgid "" -"Your object appears to be too large, Do you want to scale it down to fit the " -"heat bed automatically?" -msgstr "物件看起來太大，希望將物件自動縮小以適應列印板嗎？" - -msgid "Object too large" -msgstr "物件太大" - -msgid "Export STL file:" -msgstr "匯出 STL 檔案：" - -msgid "Export AMF file:" -msgstr "匯出 AMF 檔案：" - -msgid "Save file as:" -msgstr "檔案另存為：" - -msgid "Export OBJ file:" -msgstr "匯出 OBJ 檔案：" - -#, possible-c-format, possible-boost-format -msgid "" -"The file %s already exists\n" -"Do you want to replace it?" -msgstr "" -"檔案 %s 已存在\n" -"是否要覆蓋它？" - -msgid "Confirm Save As" -msgstr "確認另存為" - -msgid "Delete object which is a part of cut object" -msgstr "刪除切割物件的一部分" - -msgid "" -"You try to delete an object which is a part of a cut object.\n" -"This action will break a cut correspondence.\n" -"After that model consistency can't be guaranteed." -msgstr "" -"你正在嘗試刪除一個屬於切割物件的部分。\n" -"此操作將破壞切割對應關係。\n" -"模型的一致性可能無法保證。" - -msgid "The selected object couldn't be split." -msgstr "選中的模型不可分割。" - -msgid "Another export job is running." -msgstr "有其他匯出任務正在進行中。" - -msgid "Unable to replace with more than one volume" -msgstr "無法取代超過一個體積" - -msgid "Error during replace" -msgstr "替換時發生錯誤" - -msgid "Replace from:" -msgstr "替換自：" - -msgid "Select a new file" -msgstr "選擇新檔案" - -msgid "File for the replace wasn't selected" -msgstr "未選擇替換檔案" - -msgid "Please select a file" -msgstr "請選擇一個檔案" - -msgid "Do you want to replace it" -msgstr "確定要更換它嗎" - -msgid "Message" -msgstr "訊息" - -msgid "Reload from:" -msgstr "重新載入自：" - -msgid "Unable to reload:" -msgstr "無法重新載入：" - -msgid "Error during reload" -msgstr "重新載入時出現錯誤" - -msgid "There are warnings after slicing models:" -msgstr "模型切片警告：" - -msgid "warnings" -msgstr "警告" - -msgid "Invalid data" -msgstr "無效數據" - -msgid "Slicing Canceled" -msgstr "切片已取消" - -#, c-format, boost-format -msgid "Slicing Plate %d" -msgstr "正在切片列印板 %d" - -msgid "Please resolve the slicing errors and publish again." -msgstr "請解決切片錯誤後再重新發布。" - -msgid "" -"Network Plug-in is not detected. Network related features are unavailable." -msgstr "未偵測到網路插件。網路相關功能不可用。" - -msgid "" -"Preview only mode:\n" -"The loaded file contains gcode only, Can not enter the Prepare page" -msgstr "" -"僅預覽模式：\n" -"被載入的檔案僅包含 G-Code，不支援進入準備頁面" - -#, fuzzy -msgid "You can keep the modified presets to the new project or discard them" -msgstr "你可以將修改後的預設檔保留到新專案項目中或者忽略這些修改" - -msgid "Creating a new project" -msgstr "建立新專案" - -msgid "Load project" -msgstr "載入專案項目" - -msgid "" -"Failed to save the project.\n" -"Please check whether the folder exists online or if other programs open the " -"project file." -msgstr "" -"儲存檔案失敗。請檢查資料夾是否存在，以及是否有其他程式打開了該專案項目檔案。" - -msgid "Save project" -msgstr "儲存專案項目" - -msgid "Importing Model" -msgstr "正在匯入模型" - -msgid "prepare 3mf file..." -msgstr "正在準備 3mf 檔案..." - -msgid "Download failed, unknown file format." -msgstr "下載失敗，未知的檔案格式。" - -msgid "downloading project ..." -msgstr "專案項目下載中..." - -msgid "Download failed, File size exception." -msgstr "下載失敗，檔案大小異常。" - -#, c-format, boost-format -msgid "Project downloaded %d%%" -msgstr "專案已下載 %d%%" - -msgid "" -"Importing to Orca Slicer failed. Please download the file and manually " -"import it." -msgstr "匯入 Orca Slicer 失敗。 請下載該檔案並手動匯入。" - -msgid "Import SLA archive" -msgstr "匯入 SLA 存檔" - -msgid "The selected file" -msgstr "已選擇的檔案" - -msgid "does not contain valid gcode." -msgstr "不包含有效的 G-code 檔案。" - -msgid "Error occurs while loading G-code file" -msgstr "載入 G-code 檔案時遇到錯誤" - -#. TRN %1% is archive path -#, possible-boost-format -msgid "Loading of a ZIP archive on path %1% has failed." -msgstr "載入路徑 %1% 的 ZIP 檔案失敗。" - -#. TRN: First argument = path to file, second argument = error description -#, possible-boost-format -msgid "Failed to unzip file to %1%: %2%" -msgstr "無法將檔案解壓縮到 %1%：%2%" - -#, possible-boost-format -msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." -msgstr "無法找到解壓縮的檔案 %1%。解壓縮檔案失敗。" - -#, fuzzy -msgid "Drop project file" -msgstr "刪除專案項目" - -msgid "Please select an action" -msgstr "請選擇處理方式" - -msgid "Open as project" -msgstr "作為專案項目打開" - -msgid "Import geometry only" -msgstr "僅匯入模型數據" - -msgid "Only one G-code file can be opened at the same time." -msgstr "只能同時打開一個 G-code 檔案。" - -msgid "G-code loading" -msgstr "正在載入 G-code 檔案" - -msgid "G-code files can not be loaded with models together!" -msgstr "G-code 檔案不能和模型一起載入！" - -msgid "Can not add models when in preview mode!" -msgstr "在預覽模式不允許增加模型！" - -msgid "All objects will be removed, continue?" -msgstr "即將刪除所有物件，是否繼續？" - -msgid "The current project has unsaved changes, save it before continue?" -msgstr "目前專案包含未儲存的修改，是否先儲存？" - -msgid "Number of copies:" -msgstr "複製數量：" - -#, fuzzy -msgid "Copies of the selected object" -msgstr "所選物件的複製數量" - -msgid "Save G-code file as:" -msgstr "G-code 檔案另存為：" - -msgid "Save SLA file as:" -msgstr "SLA 檔案另存為：" - -msgid "The provided file name is not valid." -msgstr "檔案名稱無效。" - -msgid "The following characters are not allowed by a FAT file system:" -msgstr "FAT 檔案系統不允許使用以下字元：" - -msgid "Save Sliced file as:" -msgstr "切片檔案另存為：" - -#, possible-c-format, possible-boost-format -msgid "" -"The file %s has been sent to the printer's storage space and can be viewed " -"on the printer." -msgstr "檔案 %s 已經傳送到列印設備的儲存空間，可以在列印設備上瀏覽。" - -msgid "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be kept. You may fix the meshes and try again." -msgstr "無法對模型網格執行布林運算。只有正向部分會被保留。你可以修正網格後再試一次。" - -#, possible-boost-format -msgid "Reason: part \"%1%\" is empty." -msgstr "原因：零件 「%1%”」 無物件。" - -#, possible-boost-format -msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "原因：零件 「%1%」 無體積。" - -#, possible-boost-format -msgid "Reason: part \"%1%\" has self intersection." -msgstr "原因：零件 「%1%」" - -#, possible-boost-format -msgid "Reason: \"%1%\" and another part have no intersection." -msgstr "原因：「%1%」 與另一個零件沒有交集。" - -#, fuzzy -msgid "" -"Unable to perform boolean operation on model meshes. Only positive parts " -"will be exported." -msgstr "無法對模型網格執行布林運算。只有正面部分將被導出。" - -msgid "" -"Are you sure you want to store original SVGs with their local paths into the " -"3MF file?\n" -"If you hit 'NO', all SVGs in the project will not be editable any more." -msgstr "" -"你確定要將原始 SVG 檔案及其本地路徑儲存到 3MF 檔案中嗎？\n" -"如果選擇「否」，專案中的所有 SVG 將不再可編輯。" - -msgid "Private protection" -msgstr "私密保護" - -#, fuzzy -msgid "Is the printer ready? Is the print sheet in place, empty and clean?" -msgstr "列印設備是否準備完成？列印平台是否在正確的位置、有沒有異物、是否乾淨？" - -msgid "Upload and Print" -msgstr "上傳並列印" - -#, fuzzy -msgid "" -"Print By Object: \n" -"Suggest to use auto-arrange to avoid collisions when printing." -msgstr "逐件列印：\n" -"建議使用自動擺放避免列印時發生碰撞。" - -msgid "Send G-code" -msgstr "傳送 G-code" - -msgid "Send to printer" -msgstr "傳送到列印設備" - -msgid "Custom supports and color painting were removed before repairing." -msgstr "自訂的支撐和上色在模型修復之前被清除了。" - -msgid "Optimize Rotation" -msgstr "優化旋轉" - -msgid "Invalid number" -msgstr "無效數字" - -msgid "Plate Settings" -msgstr "列印板參數設定" - -#, boost-format -msgid "Number of currently selected parts: %1%\n" -msgstr "目前選擇的零件數量：%1%\n" - -#, boost-format -msgid "Number of currently selected objects: %1%\n" -msgstr "目前選擇的物件數量：%1%\n" - -#, boost-format -msgid "Part name: %1%\n" -msgstr "零件名字：%1%\n" - -#, boost-format -msgid "Object name: %1%\n" -msgstr "物件名字：%1%\n" - -#, boost-format -msgid "Size: %1% x %2% x %3% in\n" -msgstr "大小：%1% x %2% x %3% 英寸\n" - -#, boost-format -msgid "Size: %1% x %2% x %3% mm\n" -msgstr "大小： %1% x %2% x %3% mm\n" - -#, boost-format -msgid "Volume: %1% in³\n" -msgstr "體積： %1% 英寸³\n" - -#, boost-format -msgid "Volume: %1% mm³\n" -msgstr "體積： %1% mm³\n" - -#, boost-format -msgid "Triangles: %1%\n" -msgstr "三角形：%1%\n" - -msgid "Tips:" -msgstr "提示：" - -msgid "" -"\"Fix Model\" feature is currently only on Windows. Please repair the model " -"on Orca Slicer(windows) or CAD softwares." -msgstr "" -"「模型修復」功能目前僅適用於 Windows。" -"請在 Orca Slicer（Windows）或 CAD 軟體中修復模型。" - -#, possible-c-format, possible-boost-format -msgid "" -"Plate% d: %s is not suggested to be used to print filament %s(%s). If you " -"still want to do this printing, please set this filament's bed temperature " -"to non zero." -msgstr "列印板% d：%s 不建議用於列印 %s（%s）線材。如果您仍想執行此列印，請將該線材的熱床溫度設為非零值。" - -msgid "Switching the language requires application restart.\n" -msgstr "切換語言要求重啟應用程式。\n" - -msgid "Do you want to continue?" -msgstr "是否繼續？" - -msgid "Language selection" -msgstr "語言選擇" - -msgid "Switching application language while some presets are modified." -msgstr "在切換應用語言之前發現某些參數預設有更改。" - -msgid "Changing application language" -msgstr "正在為應用程式切換語言" - -msgid "Changing the region will log out your account.\n" -msgstr "修改區域會自動登出你的帳號。\n" - -msgid "Region selection" -msgstr "區域選擇" - -msgid "Second" -msgstr "秒" - -msgid "Browse" -msgstr "瀏覽" - -msgid "Choose Download Directory" -msgstr "選擇下載資料夾" - -msgid "Associate" -msgstr "關聯" - -msgid "with OrcaSlicer so that Orca can open models from" -msgstr "與 OrcaSlicer 關聯，以便 Orca 可以從中打開模型" - -msgid "Current Association: " -msgstr "當前關聯：" - -msgid "Current Instance" -msgstr "當前實例" - -msgid "Current Instance Path: " -msgstr "當前實例路徑：" - -msgid "General Settings" -msgstr "一般設定" - -msgid "Asia-Pacific" -msgstr "亞太" - -msgid "China" -msgstr "中國" - -msgid "Europe" -msgstr "歐洲" - -msgid "North America" -msgstr "北美" - -msgid "Others" -msgstr "其他" - -msgid "Login Region" -msgstr "登入區域" - -msgid "Stealth Mode" -msgstr "區域網路模式" - -msgid "" -"This stops the transmission of data to Bambu's cloud services. Users who " -"don't use BBL machines or use LAN mode only can safely turn on this function." -msgstr "" -"這會停止數據傳輸到 Bambu 的雲端服務。" -"使用者如果不使用 Bambu 機台或僅使用區域網路模式，可以安全地啟用此功能。" - -msgid "Enable network plugin" -msgstr "啟用網路插件" - -msgid "Check for stable updates only" -msgstr "僅檢查穩定版更新" - -msgid "Metric" -msgstr "公制" - -msgid "Imperial" -msgstr "英製" - -msgid "Units" -msgstr "單位" - -msgid "Allow only one OrcaSlicer instance" -msgstr "僅允許一個 OrcaSlicer 程序" - -msgid "" -"On OSX there is always only one instance of app running by default. However " -"it is allowed to run multiple instances of same app from the command line. " -"In such case this settings will allow only one instance." -msgstr "在 OSX 上，預設情況下總是只有一個應用程式實例在運行。" -"但是卻允許從命令視窗執行同一應用程式的多個實例。當你設定了這個設定後將只允許一個實例執行。" - -msgid "" -"If this is enabled, when starting OrcaSlicer and another instance of the " -"same OrcaSlicer is already running, that instance will be reactivated " -"instead." -msgstr "啟用後，嘗試開起 OrcaSlicer 時若有另一個 OrcaSlicer 程序已在運行時，" -"已在運行的程序會被重新啟動。" - -msgid "Home" -msgstr "首頁" - -msgid "Default Page" -msgstr "預設頁面" - -msgid "Set the page opened on startup." -msgstr "設定為啟動頁面。" - -msgid "Touchpad" -msgstr "觸控板" - -msgid "Camera style" -msgstr "相機模式" - -msgid "" -"Select camera navigation style.\n" -"Default: LMB+move for rotation, RMB/MMB+move for panning.\n" -"Touchpad: Alt+move for rotation, Shift+move for panning." -msgstr "" -"選擇相機導航樣式。\n" -"預設：左鍵+移動旋轉，右鍵/中鍵+移動平移。\n" -"觸控板：Alt+移動旋轉，Shift+移動平移。" - -msgid "Zoom to mouse position" -msgstr "放大到滑鼠位置" - -msgid "" -"Zoom in towards the mouse pointer's position in the 3D view, rather than the " -"2D window center." -msgstr "在 3D 視圖中以滑鼠指標的位置為中心放大，而非以 2D 視窗中心放大。" - -msgid "Use free camera" -msgstr "使用自由鏡頭" - -msgid "If enabled, use free camera. If not enabled, use constrained camera." -msgstr "如果啟用，則使用自由鏡頭。若未啟用，則使用受限鏡頭。" - -msgid "Reverse mouse zoom" -msgstr "反轉滑鼠滾輪縮放方向" - -msgid "If enabled, reverses the direction of zoom with mouse wheel." -msgstr "啟用後，改變滑鼠滾輪縮放方向。" - -msgid "Show splash screen" -msgstr "顯示啟動動畫" - -msgid "Show the splash screen during startup." -msgstr "啟動時顯示啟動動畫。" - -msgid "Show \"Tip of the day\" notification after start" -msgstr "啟動後顯示\"每日小提示\"通知" - -msgid "If enabled, useful hints are displayed at startup." -msgstr "如果啟用，將在啟動時顯示有用的提示。" - -msgid "Flushing volumes: Auto-calculate every time the color changed." -msgstr "廢料體積：換色時自動計算。" - -msgid "If enabled, auto-calculate every time the color changed." -msgstr "啟用後，換色時自動計算。" - -msgid "" -"Flushing volumes: Auto-calculate every time when the filament is changed." -msgstr "廢料體積：換料時自動計算。" - -msgid "If enabled, auto-calculate every time when filament is changed" -msgstr "啟用後，換料時自動計算" - -msgid "Remember printer configuration" -msgstr "記住機臺設定" - -msgid "" -"If enabled, Orca will remember and switch filament/process configuration for " -"each printer automatically." -msgstr "啟用後，Orca會記住且自動切換各機臺線材與列印設定。" - -msgid "Multi-device Management(Take effect after restarting Orca)." -msgstr "多臺設備管理(需重開Orca)" - -msgid "" -"With this option enabled, you can send a task to multiple devices at the " -"same time and manage multiple devices." -msgstr "啟用時可以同時傳送到並管理多個機臺。" - -msgid "Auto arrange plate after cloning" -msgstr "複製後自動排列列印板" - -msgid "Auto arrange plate after object cloning" -msgstr "物件複製後自動排列列印板" - -msgid "Network" -msgstr "網路" - -msgid "Auto sync user presets(Printer/Filament/Process)" -msgstr "自動同步使用者預設（列印設備/線材/列印品質參數）" - -msgid "User Sync" -msgstr "使用者同步" - -msgid "Update built-in Presets automatically." -msgstr "自動更新系統預設。" - -msgid "System Sync" -msgstr "系統同步" - -msgid "Clear my choice on the unsaved presets." -msgstr "清除我對未儲存預設的選擇。" - -msgid "Associate files to OrcaSlicer" -msgstr " Orca Slicer 檔案關聯" - -msgid "Associate .3mf files to OrcaSlicer" -msgstr "使用 Orca Slicer 打開 .3mf 檔案" - -msgid "If enabled, sets OrcaSlicer as default application to open .3mf files" -msgstr "開啟後，將預設使用 Orca Slicer 打開 .3mf 檔案" - -msgid "Associate .stl files to OrcaSlicer" -msgstr "使用 Orca Slicer 打開 .stl 檔案" - -msgid "If enabled, sets OrcaSlicer as default application to open .stl files" -msgstr "開啟後，將預設使用 Orca Slicer 打開 .stl 檔案" - -msgid "Associate .step/.stp files to OrcaSlicer" -msgstr "使用 Orca Slicer 打開 .step/.stp 檔案" - -msgid "If enabled, sets OrcaSlicer as default application to open .step files" -msgstr "開啟後，將預設使用 Orca Slicer 打開 .step 檔案" - -msgid "Associate web links to OrcaSlicer" -msgstr "將網頁連結關聯到 OrcaSlicer" - -msgid "Associate URLs to OrcaSlicer" -msgstr "將 URL 關聯到 OrcaSlicer" - -msgid "Maximum recent projects" -msgstr "最近專案項目的最大數量" - -msgid "Maximum count of recent projects" -msgstr "近期專案項目的最大統計" - -msgid "Clear my choice on the unsaved projects." -msgstr "清除我對未儲存的專案項目的選擇。" - -msgid "No warnings when loading 3MF with modified G-codes" -msgstr "載入具有GCODE修改的3MF時不警告" - -msgid "Auto-Backup" -msgstr "自動備份" - -msgid "" -"Backup your project periodically for restoring from the occasional crash." -msgstr "定期備份專案，以便從未預期的錯誤中恢復。" - -msgid "every" -msgstr "所有" - -msgid "The period of backup in seconds." -msgstr "備份的週期。" - -msgid "Downloads" -msgstr "下載" - -msgid "Dark Mode" -msgstr "深色模式" - -msgid "Enable Dark mode" -msgstr "啟用深色模式" - -msgid "Develop mode" -msgstr "開發者模式" - -msgid "Skip AMS blacklist check" -msgstr "跳過 AMS 黑名單檢查" - -msgid "Home page and daily tips" -msgstr "首頁和每日小提示" - -msgid "Show home page on startup" -msgstr "啟動時顯示首頁" - -msgid "Sync settings" -msgstr "同步設定" - -msgid "User sync" -msgstr "使用者同步" - -msgid "Preset sync" -msgstr "預設檔同步" - -msgid "Preferences sync" -msgstr "偏好設定同步" - -msgid "View control settings" -msgstr "視角控制設定" - -msgid "Rotate of view" -msgstr "旋轉視角" - -msgid "Move of view" -msgstr "移動視角" - -msgid "Zoom of view" -msgstr "縮放視角" - -msgid "Other" -msgstr "其他" - -msgid "Mouse wheel reverses when zooming" -msgstr "縮放時滑鼠滾輪反轉" - -msgid "Enable SSL(MQTT)" -msgstr "啟用SSL（MQTT）" - -msgid "Enable SSL(FTP)" -msgstr "啟用SSL（FTP）" - -msgid "Internal developer mode" -msgstr "內部開發者模式" - -msgid "Log Level" -msgstr "日誌級別" - -msgid "fatal" -msgstr "致命" - -msgid "error" -msgstr "錯誤" - -msgid "warning" -msgstr "警告" - -msgid "debug" -msgstr "除錯" - -msgid "trace" -msgstr "跟蹤" - -#, fuzzy -msgid "Host Setting" -msgstr "伺服器設定" - -msgid "DEV host: api-dev.bambu-lab.com/v1" -msgstr "開發環境主機：api-dev.bambu-lab.com/v1" - -msgid "QA host: api-qa.bambu-lab.com/v1" -msgstr "測試環境主機：api-qa.bambu-lab.com/v1" - -msgid "PRE host: api-pre.bambu-lab.com/v1" -msgstr "預發布環境主機：api-pre.bambu-lab.com/v1" - -msgid "Product host" -msgstr "正式環境" - -msgid "debug save button" -msgstr "儲存" - -msgid "save debug settings" -msgstr "儲存除錯設定" - -msgid "DEBUG settings have saved successfully!" -msgstr "除錯模式生效!" - -msgid "Switch cloud environment, Please login again!" -msgstr "切換雲端環境，請重新登入!" - -msgid "System presets" -msgstr "系統預設" - -msgid "User presets" -msgstr "使用者預設" - -msgid "Incompatible presets" -msgstr "不相容的預設" - -msgid "AMS filaments" -msgstr "AMS 線材" - -msgid "Click to pick filament color" -msgstr "點擊設定線材顏色" - -msgid "Please choose the filament colour" -msgstr "請選擇線材顏色" - -msgid "Add/Remove presets" -msgstr "新增/刪除 預設" - -msgid "Edit preset" -msgstr "編輯預設" - -msgid "Project-inside presets" -msgstr "項目預設" - -msgid "Add/Remove filaments" -msgstr "新增/刪除線材" - -msgid "Add/Remove materials" -msgstr "新增/刪除材料" - -msgid "Select/Remove printers(system presets)" -msgstr "選擇/移除機台(系統預設)" - -msgid "Create printer" -msgstr "創建機臺" - -msgid "The selected preset is null!" -msgstr "選擇的預設為空！" - -msgid "End" -msgstr "End" - -msgid "Customize" -msgstr "自訂" - -msgid "Other layer filament sequence" -msgstr "其他層的線材列印順序" - -msgid "Please input layer value (>= 2)." -msgstr "請輸入層數值（>= 2）" - -msgid "Plate name" -msgstr "列印板名稱" - -msgid "Same as Global Print Sequence" -msgstr "跟隨全域列印順序" - -msgid "Print sequence" -msgstr "列印順序" - -msgid "Same as Global" -msgstr "跟隨全域設定" - -msgid "Disable" -msgstr "停用" - -msgid "Spiral vase" -msgstr "花瓶模式" - -msgid "First layer filament sequence" -msgstr "首層線材列印順序" - -#, fuzzy -msgid "Same as Global Plate Type" -msgstr "跟隨全域列印板設定" - -#, fuzzy -msgid "Same as Global Bed Type" -msgstr "跟隨全域列印板設定" - -msgid "By Layer" -msgstr "逐層" - -msgid "By Object" -msgstr "逐件" - -msgid "Accept" -msgstr "接受" - -msgid "Log Out" -msgstr "登出" - -msgid "Slice all plate to obtain time and filament estimation" -msgstr "正在切片以獲取切片資訊和預估列印時間" - -msgid "Packing project data into 3mf file" -msgstr "正在將專案資料打包到 3mf 檔案中" - -msgid "Uploading 3mf" -msgstr "正在上傳 3mf" - -msgid "Jump to model publish web page" -msgstr "發布頁面" - -msgid "Note: The preparation may takes several minutes. Please be patient." -msgstr "提示：發布前需要一些準備時間，請耐心等待。" - -msgid "Publish" -msgstr "發布" - -msgid "Publish was cancelled" -msgstr "發布已取消" - -msgid "Slicing Plate 1" -msgstr "正在切片列印板 1" - -msgid "Packing data to 3mf" -msgstr "將資料打包至 3mf" - -msgid "Jump to webpage" -msgstr "轉換到網頁" - -#, c-format, boost-format -msgid "Save %s as" -msgstr "另存 %s 為" - -msgid "User Preset" -msgstr "使用者預設" - -msgid "Preset Inside Project" -msgstr "項目預設" - -msgid "Name is unavailable." -msgstr "名稱不可用。" - -msgid "Overwrite a system profile is not allowed" -msgstr "不允許覆蓋系統預設" - -#, boost-format -msgid "Preset \"%1%\" already exists." -msgstr "預設 \"%1%\" 已存在。" - -#, boost-format -msgid "Preset \"%1%\" already exists and is incompatible with current printer." -msgstr "預設 \"%1%\" 已存在，並且和目前列印設備不相容。" - -msgid "Please note that saving action will replace this preset" -msgstr "請注意這個預設會在儲存過程中被替換" - -msgid "The name cannot be the same as a preset alias name." -msgstr "名稱不能和一個預設的別名相同。" - -msgid "Save preset" -msgstr "儲存預設" - -msgctxt "PresetName" -msgid "Copy" -msgstr "複製" - -#, fuzzy, boost-format -msgid "Printer \"%1%\" is selected with preset \"%2%\"" -msgstr "選中的列印設備 \"%1%\" 和預設 \"%2%\"" - -#, fuzzy, boost-format -msgid "Please choose an action with \"%1%\" preset after saving." -msgstr "請選擇儲存後對 \"%1%\" 預設的操作。" - -#, fuzzy, boost-format -msgid "For \"%1%\", change \"%2%\" to \"%3%\" " -msgstr "為 \"%1%\"，把 \"%2%\" 更換為 \"%3%\" " - -#, fuzzy, boost-format -msgid "For \"%1%\", add \"%2%\" as a new preset" -msgstr "為 \"%1%\"，增加 \"%2%\" 為一個新預設" - -#, fuzzy, boost-format -msgid "Simply switch to \"%1%\"" -msgstr "直接切換到 \"%1%\" " - -msgid "Task canceled" -msgstr "任務已取消" - -msgid "(LAN)" -msgstr "（區域網路）" - -msgid "Search" -msgstr "搜尋" - -msgid "My Device" -msgstr "我的設備" - -msgid "Other Device" -msgstr "其他設備" - -msgid "Online" -msgstr "在線" - -msgid "Input access code" -msgstr "輸入訪問碼" - -msgid "Can't find my devices?" -msgstr "無法找到我的設備？" - -msgid "Log out successful." -msgstr "登出成功。" - -msgid "Busy" -msgstr "忙碌" - -msgid "Bambu Cool Plate" -msgstr "低溫列印版" - -msgid "PLA Plate" -msgstr "PLA 列印板" - -msgid "Bambu Engineering Plate" -msgstr "工程列印熱床" - -msgid "Bambu Smooth PEI Plate" -msgstr "Bambu 光面 PEI 打印板" - -msgid "High temperature Plate" -msgstr "高溫列印板" - -msgid "Bambu Textured PEI Plate" -msgstr "Bambu 紋理 PEI 列印板" - -msgid "Send print job to" -msgstr "傳送列印作業至" - -msgid "Flow Dynamics Calibration" -msgstr "動態流量校準" - -msgid "Click here if you can't connect to the printer" -msgstr "如果無法連接到列印設備，請按一下此處" - -msgid "send completed" -msgstr "傳送完成" - -msgid "Error code" -msgstr "錯誤代碼" - -msgid "No login account, only printers in LAN mode are displayed" -msgstr "未登入帳號，僅顯示區域網路模式的列印設備" - -msgid "Connecting to server" -msgstr "正在連接伺服器..." - -msgid "Synchronizing device information" -msgstr "正在同步設備資訊" - -msgid "Synchronizing device information time out" -msgstr "同步設備資訊逾時" - -msgid "Cannot send the print job when the printer is updating firmware" -msgstr "設備升級中，無法傳送列印作業" - -#, fuzzy -msgid "" -"The printer is executing instructions. Please restart printing after it ends" -msgstr "列印設備正在執行指令，請在指令結束後重新開始列印" - -#, fuzzy -msgid "The printer is busy on other print job" -msgstr "列印設備正在執行其他列印作業" - -#, possible-c-format, possible-boost-format -msgid "" -"Filament %s exceeds the number of AMS slots. Please update the printer " -"firmware to support AMS slot assignment." -msgstr "線材編號 %s 超出 AMS 槽位數量，請更新列印設備韌體以支援 AMS 槽位映射功能。" - -#, fuzzy -msgid "" -"Filament exceeds the number of AMS slots. Please update the printer firmware " -"to support AMS slot assignment." -msgstr "線材編號超出 AMS 槽位數量，請更新列印設備韌體以支援 AMS 槽位映射功能。" - -#, fuzzy -msgid "" -"Filaments to AMS slots mappings have been established. You can click a " -"filament above to change its mapping AMS slot" -msgstr "線材與 AMS 槽位的映射關係已設定完成。你可以點擊上方的線材來更改其對應的 AMS 槽位。" - -msgid "" -"Please click each filament above to specify its mapping AMS slot before " -"sending the print job" -msgstr "請在傳送列印前點擊上方各個線材，指定其所對應的 AMS 槽位" - -#, possible-c-format, possible-boost-format -msgid "" -"Filament %s does not match the filament in AMS slot %s. Please update the " -"printer firmware to support AMS slot assignment." -msgstr "線材編號 %s 和 AMS 槽位 %s 中的線材材質不相符，請更新列印設備韌體以支援 AMS 槽位映射功能" - -#, fuzzy -msgid "" -"Filament does not match the filament in AMS slot. Please update the printer " -"firmware to support AMS slot assignment." -msgstr "材料編號和 AMS 槽位中的線材材質不相符，請更新列印設備韌體以支援 AMS 槽位映射功能" - -#, fuzzy -msgid "" -"The printer firmware only supports sequential mapping of filament => AMS " -"slot." -msgstr "已自動建立「線材清單 => AMS 槽位」的映射關係。 可點擊上方的線材來手動設定其所對應的 AMS 槽位" - -msgid "An SD card needs to be inserted before printing." -msgstr "請在進行列印前插入 SD 記憶卡。" - -#, possible-c-format, possible-boost-format -msgid "" -"The selected printer (%s) is incompatible with the chosen printer profile in " -"the slicer (%s)." -msgstr "選定的列印設備（%s）與切片軟體中選擇的列印設備配置檔案（%s）不相容。" - -msgid "An SD card needs to be inserted to record timelapse." -msgstr "使用縮時攝影功能需要插入 SD 記憶卡。" - -msgid "" -"Cannot send the print job to a printer whose firmware is required to get " -"updated." -msgstr "機台需要更新韌體才能接收列印作業。" - -msgid "Cannot send the print job for empty plate" -msgstr "無法傳送空的列印板" - -#, fuzzy -msgid "This printer does not support printing all plates" -msgstr "此列印設備類型不支援列印所有列印板" - -msgid "" -"When enable spiral vase mode, machines with I3 structure will not generate " -"timelapse videos." -msgstr "當啟用花瓶模式時，門架結構的設備不會產生縮時攝影影片。" - -msgid "" -"Timelapse is not supported because Print sequence is set to \"By object\"." -msgstr "「逐件列印」模式下不支援縮時錄影。" - -msgid "Errors" -msgstr "錯誤" - -msgid "Please check the following:" -msgstr "請檢查以下內容：" - -msgid "" -"The printer type selected when generating G-Code is not consistent with the " -"currently selected printer. It is recommended that you use the same printer " -"type for slicing." -msgstr "" -"產生 G-code 時選擇的列印設備類型與目前選擇的列印設備不一致。" -"建議你使用相同的列印設備類型進行切片。" - -msgid "" -"There are some unknown filaments in the AMS mappings. Please check whether " -"they are the required filaments. If they are okay, press \"Confirm\" to " -"start printing." -msgstr "" -"AMS 設定中存在一些未知的線材。請檢查是否符合所需的線材。如果符合，按「確定」以開始列印作業。" - -#, possible-c-format, possible-boost-format -msgid "nozzle in preset: %s %s" -msgstr "預設中的噴嘴：%s %s" - -#, possible-c-format, possible-boost-format -msgid "nozzle memorized: %.2f %s" -msgstr "記憶中的噴嘴：%.2f %s" - -msgid "" -"Your nozzle diameter in sliced file is not consistent with memorized nozzle. " -"If you changed your nozzle lately, please go to Device > Printer Parts to " -"change settings." -msgstr "" -"切片文件中的噴嘴直徑與記憶中的噴嘴不一致。" -"如果您最近更換了噴嘴，請前往「設備 > 列印機部件」更新設定。" - -#, possible-c-format, possible-boost-format -msgid "" -"Printing high temperature material(%s material) with %s may cause nozzle " -"damage" -msgstr "" -"使用 %s 列印高溫材料（%s 材料）可能會導致噴嘴損壞。" - -msgid "Please fix the error above, otherwise printing cannot continue." -msgstr "請排除上述錯誤，否則無法繼續列印。" - -msgid "" -"Please click the confirm button if you still want to proceed with printing." -msgstr "" -"如果你仍然想繼續列印，請滑鼠左鍵點擊「確定」按鈕。" - -msgid "" -"Connecting to the printer. Unable to cancel during the connection process." -msgstr "正在連接列印設備。連接過程中無法取消。" - -msgid "" -"Caution to use! Flow calibration on Textured PEI Plate may fail due to the " -"scattered surface." -msgstr "小心使用！紋理 PEI 板 上的流量校準可能會因表面光線散射而失敗。" - -msgid "Automatic flow calibration using Micro Lidar" -msgstr "使用 Micro Lidar 進行自動流量校準" - -msgid "Modifying the device name" -msgstr "修改列印設備名稱" - -msgid "Bind with Pin Code" -msgstr "Pin碼綁定" - -msgid "Send to Printer SD card" -msgstr "傳送到列印設備的 SD 記憶卡" - -msgid "Cannot send the print task when the upgrade is in progress" -msgstr "設備升級中，無法傳送列印作業" - -msgid "The selected printer is incompatible with the chosen printer presets." -msgstr "所選列印設備與選擇的列印設備預設檔不相容。" - -msgid "An SD card needs to be inserted before send to printer SD card." -msgstr "傳送到列印設備需要插入 SD 記憶卡。" - -msgid "The printer is required to be in the same LAN as Orca Slicer." -msgstr "列印設備需要與 Orca Slicer 在同一個區域網路內。" - -msgid "The printer does not support sending to printer SD card." -msgstr "該列印設備不支援傳送到 SD 記憶卡。" - -msgid "Slice ok." -msgstr "切片完成。" - -msgid "View all Daily tips" -msgstr "顯示所有每日提示" - -msgid "Failed to create socket" -msgstr "建立網路端點連線失敗" - -msgid "Failed to connect socket" -msgstr "無法連線網路端點" - -msgid "Failed to publish login request" -msgstr "請求登陸失敗" - -msgid "Get ticket from device timeout" -msgstr "從設備獲取票證超時" - -msgid "Get ticket from server timeout" -msgstr "從伺服器獲取票證超時" - -msgid "Failed to post ticket to server" -msgstr "將票證提交到伺服器失敗" - -#, fuzzy -msgid "Failed to parse login report reason" -msgstr "無法解析登入回覆" - -msgid "Receive login report timeout" -msgstr "接收登入回覆逾時" - -msgid "Unknown Failure" -msgstr "未知錯誤" - -msgid "" -"Please Find the Pin Code in Account page on printer screen,\n" -" and type in the Pin Code below." -msgstr "請在印表設備螢幕上的帳戶頁面找到 PIN 碼，\n" -"並在下面輸入 PIN 碼。" - -msgid "Can't find Pin Code?" -msgstr "找不到Pin?" - -msgid "Pin Code" -msgstr "Pin" - -msgid "Binding..." -msgstr "綁定..." - -msgid "Please confirm on the printer screen" -msgstr "請到機台上按確認" - -msgid "Log in failed. Please check the Pin Code." -msgstr "登入失敗。請檢查 Pin碼。" - -msgid "Log in printer" -msgstr "登入列印設備" - -msgid "Would you like to log in this printer with current account?" -msgstr "你想使用目前帳號登入這台列印設備嗎?" - -msgid "Check the reason" -msgstr "查看原因" - -msgid "Read and accept" -msgstr "閱讀並接受" - -msgid "Terms and Conditions" -msgstr "使用者協議" - -msgid "" -"Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab " -"device, please read the terms and conditions.By clicking to agree to use " -"your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of " -"Use(collectively, the \"Terms\"). If you do not comply with or agree to the " -"Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." -msgstr "" -"感謝您購買 Bambu Lab 設備。在使用 Bambu Lab 設備之前，請先閱讀條款與條件。" -"點擊同意使用 Bambu Lab 設備，即表示您同意遵守隱私政策與使用條款（以下統稱「條款」）。" -"若您不同意或無法遵守 Bambu Lab 隱私政策，請勿使用 Bambu Lab 的設備及服務。" - -msgid "and" -msgstr "與" - -msgid "Privacy Policy" -msgstr "隱私協議" - -#, fuzzy -msgid "We ask for your help to improve everyone's printer" -msgstr "我們請求你的幫助來改善大家的列印設備" - -msgid "Statement about User Experience Improvement Program" -msgstr "關於使用者體驗改善計劃的聲明" - -#, possible-c-format, possible-boost-format -msgid "" -"In the 3D Printing community, we learn from each other's successes and " -"failures to adjust our own slicing parameters and settings. %s follows the " -"same principle and uses machine learning to improve its performance from the " -"successes and failures of the vast number of prints by our users. We are " -"training %s to be smarter by feeding them the real-world data. If you are " -"willing, this service will access information from your error logs and usage " -"logs, which may include information described in Privacy Policy. We will " -"not collect any Personal Data by which an individual can be identified " -"directly or indirectly, including without limitation names, addresses, " -"payment information, or phone numbers. By enabling this service, you agree " -"to these terms and the statement about Privacy Policy." -msgstr "" -"在 3D 列印社群中，我們通過分享彼此的成功與失敗經驗來調整切片參數與設置。" -"%s 也採用了相同的原則，利用機器學習，透過用戶的大量列印成功與失敗數據來提升其性能。" -"我們正以實際應用數據來訓練 %s，使其變得更智能。如果您願意，這項服務將存取您的錯誤日誌和使用日誌，" -"其中可能包含隱私政策中提到的相關資訊。我們不會收集任何可直接或間接識別個人身份的個人資料，" -"包括但不限於姓名、地址、支付資訊或電話號碼。啟用此服務即表示您同意這些條款及隱私政策聲明。" - -msgid "Statement on User Experience Improvement Plan" -msgstr "關於使用者體驗改善計劃的聲明" - -msgid "Log in successful." -msgstr "登入成功。" - -msgid "Log out printer" -msgstr "登出列印設備" - -msgid "Would you like to log out the printer?" -msgstr "你想登出列印設備嗎?" - -msgid "Please log in first." -msgstr "請先登入。" - -msgid "There was a problem connecting to the printer. Please try again." -msgstr "連接列印設備時發生錯誤。 重新連接。" - -msgid "Failed to log out." -msgstr "登出失敗。" - -#. TRN "Save current Settings" -#, possible-c-format, possible-boost-format -msgid "Save current %s" -msgstr "儲存目前 %s" - -msgid "Delete this preset" -msgstr "刪除此預設" - -msgid "Search in preset" -msgstr "在預設中搜索" - -msgid "Click to reset all settings to the last saved preset." -msgstr "點擊以將所有設定還原到最後一次儲存的版本。" - -msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " -"model without prime tower. Are you sure you want to disable prime tower?" -msgstr "平滑模式的縮時錄影需要換料塔，否則列印物件上可能會有瑕疵。您是否要關閉換料塔？" - -msgid "" -"Prime tower is required for smooth timelapse. There may be flaws on the " -"model without prime tower. Do you want to enable prime tower?" -msgstr "平滑模式的縮時錄影需要換料塔，否則列印物件上可能會有瑕疵。您是否要啟用換料塔？" - -msgid "Still print by object?" -msgstr "持續逐件列印？" - -msgid "" -"We have added an experimental style \"Tree Slim\" that features smaller " -"support volume but weaker strength.\n" -"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." -msgstr "" -"我們新增了一種實驗性支撐樣式「苗條樹」，具有更小的支撐體積但強度較低。\n" -"建議使用以下設置：0 個介面層、0 頂部距離、2 層牆。" - -msgid "" -"Change these settings automatically? \n" -"Yes - Change these settings automatically\n" -"No - Do not change these settings for me" -msgstr "" -"自動調整這些設定？\n" -"是 - 自動調整這些設定\n" -"否 - 不用為我調整這些設定" - -msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " -"settings: at least 2 interface layers, at least 0.1mm top z distance or " -"using support materials on interface." -msgstr "" -"對於 \"強壯樹 \"和 \"混合樹 \"的支撐樣式，我們推薦以下設定：" -"至少 2 層界面層，至少 0.1 毫米的頂部z距離或使用專用的支撐線材。" - -msgid "When using support material for the support interface, We recommend the following settings:\n" -"0 top z distance, 0 interface spacing, concentric pattern and disable independent support layer height" -msgstr "" -"當使用專用的支撐線材時，我們推薦以下設定：\n" -"0 頂層z距離，0 界面間距，同心模式，並且禁用獨立支撐層高" - -msgid "" -"Enabling this option will modify the model's shape. If your print requires " -"precise dimensions or is part of an assembly, it's important to double-check " -"whether this change in geometry impacts the functionality of your print." -msgstr "" -"啟用此選項將會改變模型形狀。如果你的列印需要精準的尺寸或屬於組裝件的一部分，" -"請務必再次確認此幾何形狀的更改是否會影響你的列印。" - -msgid "Are you sure you want to enable this option?" -msgstr "你確定要啟用此選項嗎？" - -msgid "" -"Layer height is too small.\n" -"It will set to min_layer_height\n" -msgstr "" -"層高過薄\n" -"將改為 min_layer_height\n" - -msgid "" -"Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " -"height limits ,this may cause printing quality issues." -msgstr "層高超過了印表設備設定 -> 擠出機 -> 層高限制，這可能會導致列印品質問題。" - -msgid "Adjust to the set range automatically? \n" -msgstr "是否自動調整至設定範圍？\n" - -msgid "Adjust" -msgstr "調整" - -msgid "Ignore" -msgstr "忽略" - -msgid "" -"Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other " -"printing complications." -msgstr "" -"實驗性功能：在換線過程中以更大的距離收回並切斷線材，以減少沖洗量。" -"儘管這可以顯著減少沖洗，但也可能增加噴嘴堵塞或其他列印問題的風險。" - -msgid "" -"Experimental feature: Retracting and cutting off the filament at a greater " -"distance during filament changes to minimize flush.Although it can notably " -"reduce flush, it may also elevate the risk of nozzle clogs or other printing " -"complications.Please use with the latest printer firmware." -msgstr "" -"實驗性功能：在換線過程中以更大的距離收回並切斷線材，以減少沖洗量。" -"儘管這可以顯著減少沖洗，但也可能增加噴嘴堵塞或其他列印問題的風險。請搭配最新的打印機韌體使用。" - -#, fuzzy -msgid "" -"When recording timelapse without toolhead, it is recommended to add a " -"\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." -msgstr "" -"在錄製無工具頭縮時錄影影片時，建議添加一個「縮時錄影換料塔」\n" -"可以通過右鍵點擊構建板的空白位置，選擇「新增標準模型」->「縮時錄影換料塔」來進行添加。" - -msgid "Line width" -msgstr "線寬" - -msgid "Seam" -msgstr "接縫" - -msgid "Precision" -msgstr "精度" - -msgid "Wall generator" -msgstr "牆產生器" - -msgid "Walls and surfaces" -msgstr "牆與表面" - -msgid "Bridging" -msgstr "橋接" - -msgid "Overhangs" -msgstr "懸空" - -msgid "Walls" -msgstr "牆" - -msgid "Top/bottom shells" -msgstr "頂部/底部外殼" - -msgid "Initial layer speed" -msgstr "首層速度" - -msgid "Other layers speed" -msgstr "其他層速度" - -msgid "Overhang speed" -msgstr "懸空列印速度" - -msgid "" -"This is the speed for various overhang degrees. Overhang degrees are " -"expressed as a percentage of line width. 0 speed means no slowing down for " -"the overhang degree range and wall speed is used" -msgstr "" -"此設置是為不同懸垂角度指定的速度。懸垂角度以線寬的百分比表示。" -"若速度設置為 0，表示該懸垂角度範圍內不會減速，將使用牆面速度" - -msgid "Bridge" -msgstr "橋接" - -msgid "Set speed for external and internal bridges" -msgstr "設定外部和內部橋接的速度" - -msgid "Travel speed" -msgstr "空駛速度" - -msgid "Acceleration" -msgstr "加速度" - -msgid "Jerk(XY)" -msgstr "抖動（XY軸）" - -msgid "Raft" -msgstr "筏層" - -msgid "Support filament" -msgstr "支撐線材" - -msgid "Tree supports" -msgstr "樹狀支撐" - -msgid "Multimaterial" -msgstr "多線材" - -msgid "Prime tower" -msgstr "換料塔" - -msgid "Filament for Features" -msgstr "用於特徵的線材" - -msgid "Ooze prevention" -msgstr "防止漏料" - -msgid "Skirt" -msgstr "側裙" - -msgid "Special mode" -msgstr "特殊模式" - -msgid "G-code output" -msgstr "G-code 輸出" - -msgid "Post-processing Scripts" -msgstr "後處理腳本" - -msgid "Notes" -msgstr "備註" - -msgid "Frequent" -msgstr "常用" - -#, possible-c-format, possible-boost-format -msgid "" -"Following line %s contains reserved keywords.\n" -"Please remove it, or will beat G-code visualization and printing time " -"estimation." -msgid_plural "" -"Following lines %s contain reserved keywords.\n" -"Please remove them, or will beat G-code visualization and printing time " -"estimation." -msgstr[0] "" -"以下行 %s 包含保留關鍵字。\n請將其移除，否則將影響 G-code 的視覺化和列印時間估算。" -msgstr[1] "" -"以下多行 %s 包含保留關鍵字。\n請將它們移除，否則將影響 G-code 的視覺化和列印時間估算。" - -msgid "Reserved keywords found" -msgstr "偵測到保留的關鍵字" - -msgid "Setting Overrides" -msgstr "參數覆蓋" - -msgid "Retraction" -msgstr "回抽" - -msgid "Basic information" -msgstr "基本資訊" - -msgid "Recommended nozzle temperature" -msgstr "建議噴嘴溫度" - -msgid "Recommended nozzle temperature range of this filament. 0 means no set" -msgstr "該線材的建議噴嘴溫度範圍。0 表示未設定" - -msgid "Flow ratio and Pressure Advance" -msgstr "流量比與壓力提前" - -msgid "Print chamber temperature" -msgstr "列印設備內部溫度" - -msgid "Print temperature" -msgstr "列印溫度" - -msgid "Nozzle" -msgstr "噴嘴" - -msgid "Nozzle temperature when printing" -msgstr "列印時的噴嘴溫度" - -msgid "Cool Plate (SuperTack)" -msgstr "低溫增穩列印板" - -msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate SuperTack" -msgstr "使用低溫增穩列印板時，熱床設定溫度其值為 0 ，表示該線材不適用於低溫增穩列印板" - -msgid "Cool Plate" -msgstr "低溫列印板" - -msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Cool Plate" -msgstr "使用低溫列印板時，熱床設定溫度其值為 0 ，表示該線材不適用於低溫列印板" - -msgid "Textured Cool plate" -msgstr "紋理低溫列印板" - -msgid "" -"Bed temperature when cool plate is installed. Value 0 means the filament " -"does not support to print on the Textured Cool Plate" -msgstr "使用紋理低溫列印板時，熱床設定溫度其值為 0 ，表示該線材不適用於紋理低溫列印板" - -msgid "Engineering plate" -msgstr "工程列印板" - -msgid "" -"Bed temperature when engineering plate is installed. Value 0 means the " -"filament does not support to print on the Engineering Plate" -msgstr "使用工程列印板時，熱床設定溫度其值為 0 ，表示該線材不適用於工程列印板" - -msgid "Smooth PEI Plate / High Temp Plate" -msgstr "光滑 PEI 列印板 / 高溫列印板" - -msgid "" -"Bed temperature when Smooth PEI Plate/High temperature plate is installed. " -"Value 0 means the filament does not support to print on the Smooth PEI Plate/" -"High Temp Plate" -msgstr "使用光滑 PEI 列印板 / 高溫列印板時，熱床設定溫度其值為 0 ，" -"表示該線材不適用於光滑 PEI 列印板 / 高溫列印板" - -msgid "Textured PEI Plate" -msgstr "紋理 PEI 列印板" - -msgid "" -"Bed temperature when Textured PEI Plate is installed. Value 0 means the " -"filament does not support to print on the Textured PEI Plate" -msgstr "使用紋理 PEI 列印板時，熱床設定溫度其值為 0 ，表示該線材不適用於紋理 PEI 列印板" - -msgid "Volumetric speed limitation" -msgstr "體積流量速度限制" - -msgid "Cooling" -msgstr "冷卻" - -msgid "Cooling for specific layer" -msgstr "特定層冷卻" - -msgid "Part cooling fan" -msgstr "物件冷卻風扇" - -msgid "Min fan speed threshold" -msgstr "最小風扇速度臨界值" - -msgid "" -"Part cooling fan speed will start to run at min speed when the estimated " -"layer time is no longer than the layer time in setting. When layer time is " -"shorter than threshold, fan speed is interpolated between the minimum and " -"maximum fan speed according to layer printing time" -msgstr "當預計的層時間小於設定的層時間時，物件冷卻風扇速度將開始以最小速度運轉。" -"當層時間小於設定值時，風扇速度將根據該層列印時間在最小和最大風扇速度之間自動調整" - -msgid "Max fan speed threshold" -msgstr "最大風扇速度臨界值" - -msgid "" -"Part cooling fan speed will be max when the estimated layer time is shorter " -"than the setting value" -msgstr "當預計的層列印時間比設定值要小時，物件冷卻風扇轉速將達到最大值" - -msgid "Auxiliary part cooling fan" -msgstr "輔助冷卻風扇" - -msgid "Exhaust fan" -msgstr "排風扇" - -msgid "During print" -msgstr "列印期間" - -msgid "Complete print" -msgstr "列印完成" - -msgid "Filament start G-code" -msgstr "線材起始 G-code" - -msgid "Filament end G-code" -msgstr "線材結束 G-code" - -msgid "Wipe tower parameters" -msgstr "換料塔參數" - -#, fuzzy -msgid "Toolchange parameters with single extruder MM printers" -msgstr "單擠出機多線材列印設備換色參數" - -#, fuzzy -msgid "Ramming settings" -msgstr "尖端成型設定" - -#, fuzzy -msgid "Toolchange parameters with multi extruder MM printers" -msgstr "多擠出機多線材列印設備換色參數" - -msgid "Printable space" -msgstr "可列印區域" - -#. TRN: First argument is parameter name, the second one is the value. -#, possible-boost-format -msgid "Invalid value provided for parameter %1%: %2%" -msgstr "參數 %1% 的值無效：%2%" - -msgid "G-code flavor is switched" -msgstr "G-code 格式已切換" - -msgid "Cooling Fan" -msgstr "冷卻風扇" - -msgid "Fan speed-up time" -msgstr "風扇反應時間" - -msgid "Extruder Clearance" -msgstr "擠出機避讓空間" - -msgid "Adaptive bed mesh" -msgstr "自適應床面網格" - -msgid "Accessory" -msgstr "配件" - -msgid "Machine gcode" -msgstr "列印設備 G-code" - -msgid "Machine start G-code" -msgstr "列印設備起始 G-code" - -msgid "Machine end G-code" -msgstr "列印設備結束 G-code" - -msgid "Printing by object G-code" -msgstr "按物件列印的 G-code" - -msgid "Before layer change G-code" -msgstr "換層前 G-code" - -msgid "Layer change G-code" -msgstr "換層 G-code" - -msgid "Time lapse G-code" -msgstr "縮時錄影 G-code" - -msgid "Change filament G-code" -msgstr "線材更換 G-code" - -msgid "Change extrusion role G-code" -msgstr "變更擠出機任務的 G-code" - -msgid "Pause G-code" -msgstr "暫停 G-code" - -msgid "Template Custom G-code" -msgstr "模板自訂 G-code" - -msgid "Motion ability" -msgstr "移動能力" - -msgid "Normal" -msgstr "普通" - -msgid "Speed limitation" -msgstr "速度限制" - -msgid "Acceleration limitation" -msgstr "加速度限制" - -msgid "Jerk limitation" -msgstr "抖動限制" - -msgid "Single extruder multi-material setup" -msgstr "單擠出機多線材設定" - -msgid "Number of extruders of the printer." -msgstr "機台擠出機數量。" - -msgid "" -"Single Extruder Multi Material is selected, \n" -"and all extruders must have the same diameter.\n" -"Do you want to change the diameter for all extruders to first extruder " -"nozzle diameter value?" -msgstr "" -"已選擇單噴頭多材料模式，\n" -"所有噴頭的直徑必須相同。\n" -"您是否要將所有噴頭的直徑更改為第一噴頭的噴嘴直徑值？" - -msgid "Nozzle diameter" -msgstr "噴嘴直徑" - -msgid "Wipe tower" -msgstr "換料塔" - -msgid "Single extruder multi-material parameters" -msgstr "單擠出機多線材參數" - -msgid "" -"This is a single extruder multi-material printer, diameters of all extruders " -"will be set to the new value. Do you want to proceed?" -msgstr "這是一台單噴頭多材料列印機，所有噴頭的直徑將被設置為新的值。您要繼續嗎？" - -msgid "Layer height limits" -msgstr "層高限制" - -msgid "Z-Hop" -msgstr "Z 軸抬升" - -msgid "Retraction when switching material" -msgstr "切換線材時的回抽量" - -msgid "" -"The Wipe option is not available when using the Firmware Retraction mode.\n" -"\n" -"Shall I disable it in order to enable Firmware Retraction?" -msgstr "" -"當使用韌體回抽模式時，擦拭選項不可用。\n" -"\n" -"是否需要禁用擦拭以啟用韌體回抽？" - -msgid "Firmware Retraction" -msgstr "韌體回抽" - -msgid "Detached" -msgstr "分離的" - -#, possible-c-format, possible-boost-format -msgid "" -"%d Filament Preset and %d Process Preset is attached to this printer. Those " -"presets would be deleted if the printer is deleted." -msgstr "此列印設備含有 %d 線材預設和 %d 列印參數預設。若刪除此列印設備，這些預設將被刪除。" - -msgid "Presets inherited by other presets can not be deleted!" -msgstr "被其他預設繼承的預設無法刪除！" - -msgid "The following presets inherit this preset." -msgid_plural "The following preset inherits this preset." -msgstr[0] "以下預設繼承了此預設。" -msgstr[1] "以下預設繼承了此預設。" - -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% 預設" - -msgid "Following preset will be deleted too." -msgid_plural "Following presets will be deleted too." -msgstr[0] "以下預設將一起被刪除" -msgstr[1] "以下預設將一起被刪除" - -msgid "" -"Are you sure to delete the selected preset? \n" -"If the preset corresponds to a filament currently in use on your printer, " -"please reset the filament information for that slot." -msgstr "" -"您確定要刪除所選預設嗎？\n" -"如果該預設對應的是列印設備當前使用的線材，請重置該槽位的線材資訊。" - -#, possible-boost-format -msgid "Are you sure to %1% the selected preset?" -msgstr "確定要 %1% 所選預設嗎？" - -msgid "All" -msgstr "所有" - -msgid "Set" -msgstr "設定" - -#, fuzzy -msgid "Click to reset current value and attach to the global value." -msgstr "點擊該圖示，恢復到全域的設定數值，並與全域設定同步變化。" - -msgid "Click to drop current modify and reset to saved value." -msgstr "放棄目前的修改，恢復到上次儲存的數值。" - -msgid "Process Settings" -msgstr "列印參數設定" - -msgid "Undef" -msgstr "未定義" - -msgid "Unsaved Changes" -msgstr "未儲存的更改" - -msgid "Transfer or discard changes" -msgstr "放棄或保留更改" - -msgid "Old Value" -msgstr "舊值" - -msgid "New Value" -msgstr "新值" - -msgid "Transfer" -msgstr "遷移" - -msgid "Don't save" -msgstr "不儲存" - -msgid "Discard" -msgstr "放棄" - -msgid "Click the right mouse button to display the full text." -msgstr "單擊滑鼠右鍵顯示全文。" - -msgid "All changes will not be saved" -msgstr "所有的修改都不會被儲存" - -msgid "All changes will be discarded." -msgstr "所有的修改都將被丟棄。" - -msgid "Save the selected options." -msgstr "儲存所選項目。" - -msgid "Keep the selected options." -msgstr "保留所選項目。" - -msgid "Transfer the selected options to the newly selected preset." -msgstr "將所選項目遷移到新的預設中。" - -#, possible-boost-format -msgid "" -"Save the selected options to preset \n" -"\"%1%\"." -msgstr "" -"將所選的選項儲存到預設\n" -"「%1%」。" - -#, possible-boost-format -msgid "" -"Transfer the selected options to the newly selected preset \n" -"\"%1%\"." -msgstr "" -"將所選的選項轉移至新選擇的預設\n" -"「%1%」。" - -#, possible-boost-format -msgid "Preset \"%1%\" contains the following unsaved changes:" -msgstr "預設「%1%」包含以下未儲存的變更：" - -#, possible-boost-format -msgid "" -"Preset \"%1%\" is not compatible with the new printer profile and it " -"contains the following unsaved changes:" -msgstr "預設「%1%」與新的列印設備配置檔案不相容，且包含以下未儲存的變更：" - -#, possible-boost-format -msgid "" -"Preset \"%1%\" is not compatible with the new process profile and it " -"contains the following unsaved changes:" -msgstr "預設「%1%」與新的列印參數配置檔案不相容，並包含以下未儲存的變更：" - -#, boost-format -msgid "You have changed some settings of preset \"%1%\". " -msgstr "已更改預設「%1%」的一些設定。" - -msgid "" -"\n" -"You can save or discard the preset values you have modified." -msgstr "" -"\n" -"你可以儲存或放棄已修改的預設值。" - -msgid "" -"\n" -"You can save or discard the preset values you have modified, or choose to " -"transfer the values you have modified to the new preset." -msgstr "" -"\n" -"你可以儲存或放棄已修改的預設值，或選擇將修改的數值轉移到新的預設值。" - -msgid "You have previously modified your settings." -msgstr "你之前已經對設定進行了修改。" - -msgid "" -"\n" -"You can discard the preset values you have modified, or choose to transfer " -"the modified values to the new project" -msgstr "" -"\n" -"你可以放棄已修改的預設值，或選擇將修改的數值轉移到新專案中" - -msgid "Extruders count" -msgstr "擠出機數量" - -msgid "General" -msgstr "一般" - -msgid "Capabilities" -msgstr "能力" - -msgid "Show all presets (including incompatible)" -msgstr "顯示所有預設（包括不相容的）" - -msgid "Select presets to compare" -msgstr "選擇要比較的預設" - -msgid "" -"You can only transfer to current active profile because it has been modified." -msgstr "因為當前的配置檔案已被修改，您只能轉移到目前啟用的配置檔案。" - -msgid "" -"Transfer the selected options from left preset to the right.\n" -"Note: New modified presets will be selected in settings tabs after close " -"this dialog." -msgstr "" -"所選的選項從左側預設移至右側。\n" -"注意：關閉此對話框後，修改後的預設將在設置頁面中自動選取。" - -msgid "Transfer values from left to right" -msgstr "將數值從左邊轉移到右邊" - -msgid "" -"If enabled, this dialog can be used for transfer selected values from left " -"to right preset." -msgstr "如果啟用，則此視窗可用於將選定的數值從左邊轉移到右邊的預設值。" - -msgid "Add File" -msgstr "新增檔案" - -msgid "Set as cover" -msgstr "設定為封面" - -msgid "Cover" -msgstr "封面" - -#, boost-format -msgid "The name \"%1%\" already exists." -msgstr "「%1%」 已經存在。" - -msgid "Basic Info" -msgstr "基本資訊" - -msgid "Pictures" -msgstr "圖片" - -#, fuzzy -msgid "Bill of Materials" -msgstr "材料清單" - -msgid "Assembly Guide" -msgstr "組裝說明" - -msgid "Author" -msgstr "作者" - -msgid "Model Name" -msgstr "模型名字" - -#, c-format, boost-format -msgid "%s Update" -msgstr "%s 更新" - -msgid "A new version is available" -msgstr "發現新版本" - -msgid "Configuration update" -msgstr "設定檔更新" - -msgid "A new configuration package available, Do you want to install it?" -msgstr "有新的設定檔可用，是否要安裝？" - -msgid "Description:" -msgstr "描述：" - -msgid "Configuration incompatible" -msgstr "設定檔不相容" - -msgid "the configuration package is incompatible with current application." -msgstr "設定檔和目前的應用程式不相容。" - -#, possible-c-format, possible-boost-format -msgid "" -"The configuration package is incompatible with current application.\n" -"%s will update the configuration package, Otherwise it won't be able to start" -msgstr "" -"設定檔與目前的應用程式不相容。\n" -"%s 將更新設定檔，否則應用程式將無法啟動。" - -#, c-format, boost-format -msgid "Exit %s" -msgstr "退出 %s" - -#, fuzzy -msgid "the Configuration package is incompatible with current APP." -msgstr "設定檔與目前(手機應用程式)?不相容。" - -msgid "Configuration updates" -msgstr "組態檔更新" - -msgid "No updates available." -msgstr "已經是最新版本。" - -msgid "The configuration is up to date." -msgstr "目前設定檔已經是最新版本。" - -msgid "Obj file Import color" -msgstr "Obj 文件匯入顏色" - -msgid "Specify number of colors:" -msgstr "指定顏色數量：" - -#, possible-c-format, possible-boost-format -msgid "The color count should be in range [%d, %d]." -msgstr "顏色數量應在 [%d, %d] 範圍內。" - -msgid "Recommended " -msgstr "" - -msgid "Current filament colors:" -msgstr "當前線材顏色：" - -msgid "Quick set:" -msgstr "快速設置" - -msgid "Color match" -msgstr "顏色匹配" - -msgid "Approximate color matching." -msgstr "近似顏色匹配" - -msgid "Append" -msgstr "追加" - -msgid "Add consumable extruder after existing extruders." -msgstr "在現有擠出機後新增可用的擠出機。" - -msgid "Reset mapped extruders." -msgstr "重設已映射的擠出機。" - -msgid "Cluster colors" -msgstr "" - -msgid "Map Filament" -msgstr "映射線材" - -msgid "" -"Note:The color has been selected, you can choose OK \n" -" to continue or manually adjust it." -msgstr "" -"注意：顏色已選擇，您可以點擊確定繼續，\n或者手動進行調整。" - -msgid "" -"Waring:The count of newly added and \n" -" current extruders exceeds 16." -msgstr "警告：新增的擠出機量與當前擠出機總數超過 16。" - -msgid "Ramming customization" -msgstr "自訂尖端成型" - -msgid "" -"Ramming denotes the rapid extrusion just before a tool change in a single-" -"extruder MM printer. Its purpose is to properly shape the end of the " -"unloaded filament so it does not prevent insertion of the new filament and " -"can itself be reinserted later. This phase is important and different " -"materials can require different extrusion speeds to get the good shape. For " -"this reason, the extrusion rates during ramming are adjustable.\n" -"\n" -"This is an expert-level setting, incorrect adjustment will likely lead to " -"jams, extruder wheel grinding into filament etc." -msgstr "" -"尖端成型是指在單擠出機多線材列印設備中換色之前的快速抽插。\n" -"其目的是使退出的線材末端正確成形，這樣就不會妨礙新線材的插入，並可以重新插入。\n" -"這個階段很重要，不同的線材可能需要不同的擠出速度才能獲得良好的形狀。因此尖端成型過程中的擠壓率是需要可調整的。\n" -"這是一個進階的設定，不正確的調整可能會導致堵塞、線材磨損等。" - -msgid "Total ramming time" -msgstr "尖端成型總時間" - -msgid "s" -msgstr "秒" - -msgid "Total rammed volume" -msgstr "尖端成型總體積" - -msgid "Ramming line width" -msgstr "尖端成型線寬" - -#, fuzzy -msgid "Ramming line spacing" -msgstr "尖端成型線間距" - -msgid "Auto-Calc" -msgstr "自動計算" - -msgid "Re-calculate" -msgstr "重新計算" - -msgid "Flushing volumes for filament change" -msgstr "線材更換時產生的廢料體積" - -msgid "" -"Orca would re-calculate your flushing volumes every time the filaments color " -"changed. You could disable the auto-calculate in Orca Slicer > Preferences" -msgstr "" -"Orca 會在每次線材顏色變更時重新計算沖洗量。您可以在 Orca Slicer 的『偏好設置』中關閉自動計算功能。" - -msgid "Flushing volume (mm³) for each filament pair." -msgstr "在兩個線材間切換所需的廢料體積（mm³）" - -#, c-format, boost-format -msgid "Suggestion: Flushing Volume in range [%d, %d]" -msgstr "建議：廢料體積量應設定在[ %d, %d ]範圍內" - -#, c-format, boost-format -msgid "The multiplier should be in range [%.2f, %.2f]." -msgstr "倍數的數值範圍是[%.2f, %.2f]" - -msgid "Multiplier" -msgstr "倍數" - -msgid "unloaded" -msgstr "退料" - -msgid "loaded" -msgstr "進料" - -msgid "Filament #" -msgstr "線材#" - -msgid "From" -msgstr "從" - -msgid "To" -msgstr "至" - -msgid "" -"Windows Media Player is required for this task! Do you want to enable " -"'Windows Media Player' for your operation system?" -msgstr "執行此設置需要 Windows Media Player！你是否要啟用 Windows Media Player？" - -msgid "" -"BambuSource has not correctly been registered for media playing! Press Yes " -"to re-register it. You will be promoted twice" -msgstr "「BambuSource 未正確註冊為媒體播放模組！請點擊『是』進行重新註冊，過程中會有兩次提示。" - -msgid "" -"Missing BambuSource component registered for media playing! Please re-" -"install BambuStudio or seek after-sales help." -msgstr "缺少 BambuSource 媒體播放組件！請重新安裝 BambuStudio 或聯繫售後支援。" - -msgid "" -"Using a BambuSource from a different install, video play may not work " -"correctly! Press Yes to fix it." -msgstr "BambuSource 來自其他安裝版本，可能導致影片播放異常！請點擊『是』進行修復。" - -msgid "" -"Your system is missing H.264 codecs for GStreamer, which are required to " -"play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-" -"libav packages, then restart Orca Slicer?)" -msgstr "" -"你的系統缺少 GStreamer 的 H.264 編解碼器，這是播放影片所必需的。" -"（請嘗試安裝 gstreamer1.0-plugins-bad 或 gstreamer1.0-libav 套件，" -"然後重新啟動 Orca Slicer。）" - -msgid "Bambu Network plug-in not detected." -msgstr "未偵測到 Bambu 網路插件。" - -msgid "Click here to download it." -msgstr "點擊下載。" - -msgid "Login" -msgstr "登入" - -#, fuzzy -msgid "The configuration package is changed in previous Config Guide" -msgstr "設定檔在之前的設定引導過程中已改變" - -msgid "Configuration package changed" -msgstr "設定檔已改變" - -msgid "Toolbar" -msgstr "工具欄" - -msgid "Objects list" -msgstr "物件清單" - -msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" -msgstr "從 STL/STEP/3MF/OBJ/AMF 檔案中匯入幾何模型" - -msgid "⌘+Shift+G" -msgstr "⌘+Shift+G" - -msgid "Ctrl+Shift+G" -msgstr "Ctrl+Shift+G" - -msgid "Paste from clipboard" -msgstr "從剪貼簿貼上" - -#, fuzzy -msgid "Show/Hide 3Dconnexion devices settings dialog" -msgstr "顯示/隱藏 3Dconnexion 設備的設定對話框" - -msgid "Switch table page" -msgstr "切換表單頁面" - -msgid "Show keyboard shortcuts list" -msgstr "顯示鍵盤快捷鍵清單" - -msgid "Global shortcuts" -msgstr "全域快捷鍵" - -msgid "Rotate View" -msgstr "旋轉視角" - -msgid "Pan View" -msgstr "移動視角" - -msgid "Mouse wheel" -msgstr "滑鼠滾輪" - -msgid "Zoom View" -msgstr "縮放視角" - -msgid "Shift+A" -msgstr "" - -msgid "Shift+R" -msgstr "" - -#, fuzzy -msgid "" -"Auto orientates selected objects or all objects.If there are selected " -"objects, it just orientates the selected ones.Otherwise, it will orientates " -"all objects in the current disk." -msgstr "自動調整選取零件/所有零件的方向，\n" -"有選取零件時調整選取零件的方向，沒有選取零件時調整目前列印板所有零件的方向" - -msgid "Shift+Tab" -msgstr "" - -msgid "Collapse/Expand the sidebar" -msgstr "摺疊/展開 側邊欄" - -msgid "⌘+Any arrow" -msgstr "⌘+方向鍵" - -#, fuzzy -msgid "Movement in camera space" -msgstr "沿相機視角移動物件" - -msgid "⌥+Left mouse button" -msgstr "⌥+滑鼠左鍵" - -msgid "Select a part" -msgstr "選擇單一零件" - -msgid "⌘+Left mouse button" -msgstr "⌘+滑鼠左鍵" - -msgid "Select multiple objects" -msgstr "選擇多個物件" - -msgid "Ctrl+Any arrow" -msgstr "Ctrl+方向鍵" - -msgid "Alt+Left mouse button" -msgstr "Alt+滑鼠左鍵" - -msgid "Ctrl+Left mouse button" -msgstr "Ctrl+滑鼠左鍵" - -msgid "Shift+Left mouse button" -msgstr "Shift+滑鼠左鍵" - -msgid "Select objects by rectangle" -msgstr "框選多個零件" - -msgid "Arrow Up" -msgstr "上箭頭" - -msgid "Move selection 10 mm in positive Y direction" -msgstr "Y 方向移動 10mm" - -msgid "Arrow Down" -msgstr "下箭頭" - -msgid "Move selection 10 mm in negative Y direction" -msgstr "Y 方向移動 10mm" - -msgid "Arrow Left" -msgstr "左箭頭" - -msgid "Move selection 10 mm in negative X direction" -msgstr "X 方向移動 10mm" - -msgid "Arrow Right" -msgstr "右箭頭" - -msgid "Move selection 10 mm in positive X direction" -msgstr "X 方向移動 10mm" - -msgid "Shift+Any arrow" -msgstr "Shift+方向鍵" - -msgid "Movement step set to 1 mm" -msgstr "沿 X、Y 軸以 1mm 為單位步進移動" - -msgid "keyboard 1-9: set filament for object/part" -msgstr "按鍵 １～９：設定物件/零件的線材" - -msgid "Camera view - Default" -msgstr "攝影機視角 - 默認" - -msgid "Camera view - Top" -msgstr "攝影機視角 - 頂部" - -msgid "Camera view - Bottom" -msgstr "攝影機視角 - 底部" - -msgid "Camera view - Front" -msgstr "攝影機視角 - 前面" - -msgid "Camera view - Behind" -msgstr "攝影機視角 - 後面" - -msgid "Camera Angle - Left side" -msgstr "攝影機視角 - 左面" - -msgid "Camera Angle - Right side" -msgstr "攝影機視角 - 右面" - -msgid "Select all objects" -msgstr "選擇所有物件" - -msgid "Gizmo move" -msgstr "線框移動" - -msgid "Gizmo scale" -msgstr "線框縮放" - -msgid "Gizmo rotate" -msgstr "旋轉物件" - -msgid "Gizmo cut" -msgstr "切割物件" - -msgid "Gizmo Place face on bed" -msgstr "選擇底面" - -msgid "Gizmo SLA support points" -msgstr "SLA 支撐點" - -msgid "Gizmo FDM paint-on seam" -msgstr "FDM 塗裝接縫" - -msgid "Gizmo Text emboss / engrave" -msgstr "" - -msgid "Zoom in" -msgstr "放大" - -msgid "Zoom out" -msgstr "縮小" - -msgid "Switch between Prepare/Preview" -msgstr "在準備/預覽模式之中切換" - -msgid "Plater" -msgstr "準備" - -msgid "Move: press to snap by 1mm" -msgstr "移動：以 1mm 為單位步進移動" - -msgid "⌘+Mouse wheel" -msgstr "⌘+滑鼠滾輪" - -msgid "Support/Color Painting: adjust pen radius" -msgstr "支撐/顏色繪製：調整筆刷半徑" - -msgid "⌥+Mouse wheel" -msgstr "⌥+滑鼠滾輪" - -msgid "Support/Color Painting: adjust section position" -msgstr "支撐/色彩繪製：調整剖面位置" - -msgid "Ctrl+Mouse wheel" -msgstr "Ctrl+滑鼠滾輪" - -msgid "Alt+Mouse wheel" -msgstr "Alt+滑鼠滾輪" - -msgid "Gizmo" -msgstr "" - -msgid "Set extruder number for the objects and parts" -msgstr "設定物件、零件使用的擠出機編號" - -msgid "Delete objects, parts, modifiers " -msgstr "刪除物件、零件、修改器" - -msgid "Select the object/part and press space to change the name" -msgstr "選取物件、零件，按空格可修改名稱" - -msgid "Mouse click" -msgstr "滑鼠點擊" - -msgid "Select the object/part and mouse click to change the name" -msgstr "選取物件或零件，雙擊可修改名稱" - -msgid "Objects List" -msgstr "物件清單" - -msgid "Vertical slider - Move active thumb Up" -msgstr "垂直滑動條 - 向上移動一層" - -msgid "Vertical slider - Move active thumb Down" -msgstr "垂直滑動條 - 向下移動一層" - -msgid "Horizontal slider - Move active thumb Left" -msgstr "水平滑動條 - 向左移動一步" - -msgid "Horizontal slider - Move active thumb Right" -msgstr "水平滑動條 - 向右移動一步" - -msgid "On/Off one layer mode of the vertical slider" -msgstr "開啟/關閉垂直滑動條的單層模式" - -msgid "On/Off g-code window" -msgstr "開啟/關閉 G-code 視窗" - -msgid "Move slider 5x faster" -msgstr "5 倍速移動滑動條" - -msgid "Shift+Mouse wheel" -msgstr "Shift+滑鼠滾輪" - -msgid "Horizontal slider - Move to start position" -msgstr "" - -msgid "Horizontal slider - Move to last position" -msgstr "" - -msgid "Release Note" -msgstr "更新說明" - -#, c-format, boost-format -msgid "version %s update information :" -msgstr "版本 %s 更新資訊：" - -msgid "Network plug-in update" -msgstr "網路插件升級" - -msgid "Click OK to update the Network plug-in when Orca Slicer launches next time." -msgstr "按下「確定」後，下次啟動 Orca Slicer 時會更新網路插件。" - -#, c-format, boost-format -msgid "A new Network plug-in(%s) available, Do you want to install it?" -msgstr "新版的網路插件（ %s）可用，是否要安裝？" - -msgid "New version of Orca Slicer" -msgstr "新版本的 Orca Slicer" - -msgid "Skip this Version" -msgstr "跳過這個版本" - -msgid "Done" -msgstr "完成" - -msgid "resume" -msgstr "繼續" - -msgid "Resume Printing" -msgstr "繼續列印" - -msgid "Resume Printing(defects acceptable)" -msgstr "繼續列印 (瑕疵可接受)" - -msgid "Resume Printing(problem solved)" -msgstr "繼續列印 (問題排除了)" - -msgid "Stop Printing" -msgstr "停止列印" - -msgid "Check Assistant" -msgstr "" - -msgid "Filament Extruded, Continue" -msgstr "線才擠出，繼續" - -msgid "Not Extruded Yet, Retry" -msgstr "尚未擠出，重試" - -msgid "Finished, Continue" -msgstr "完成，繼續" - -msgid "Load Filament" -msgstr "進料" - -msgid "Filament Loaded, Resume" -msgstr "進料完成，繼續" - -msgid "View Liveview" -msgstr "預覽 Liveview" - -msgid "Confirm and Update Nozzle" -msgstr "" - -msgid "LAN Connection Failed (Sending print file)" -msgstr "區域網路連接失敗（傳送列印檔案）" - -msgid "Step 1, please confirm Orca Slicer and your printer are in the same LAN." -msgstr "第1步，請確認 Orca Slicer 和你的列印設備在同一個區域網路上。" - -msgid "Step 2, if the IP and Access Code below are different from the actual values on your printer, please correct them." -msgstr "步驟2, 如果下面的 IP 和訪問碼與列印設備上的實際值不同，請輸入正確的數值。" - -msgid "IP" -msgstr "" - -msgid "Access Code" -msgstr "訪問碼" - -msgid "Where to find your printer's IP and Access Code?" -msgstr "在哪裡可以找到列印設備的 IP 和訪問碼?" - -msgid "Step 3: Ping the IP address to check for packet loss and latency." -msgstr "步驟 3：Ping 該 IP 地址以檢查封包遺失和延遲。" - -msgid "Test" -msgstr "測試" - -msgid "IP and Access Code Verified! You may close the window" -msgstr "IP 和存取碼已驗證！可以關閉視窗" - -msgid "Connection failed, please double check IP and Access Code" -msgstr "連接失敗，請再次檢查 IP 和存取碼" - -msgid "Connection failed! If your IP and Access Code is correct, \n" -"please move to step 3 for troubleshooting network issues" -msgstr "連接失敗！如果 IP 和存取碼正確，\n" -"請進入第 3 步進行網路問題排解" - -msgid "Model:" -msgstr "型號：" - -msgid "Serial:" -msgstr "序號：" - -msgid "Version:" -msgstr "版本：" - -msgid "Update firmware" -msgstr "更新韌體" - -msgid "Beta version" -msgstr "" - -msgid "Latest version" -msgstr "最新版本" - -msgid "Updating" -msgstr "更新中" - -msgid "Updating failed" -msgstr "更新失敗" - -msgid "Updating successful" -msgstr "更新成功" - -msgid "Are you sure you want to update? This will take about 10 minutes. Do not turn off the power while the printer is updating." -msgstr "確定要更新嗎？更新需要大約10分鐘，更新期間請勿關閉電源。" - -msgid "An important update was detected and needs to be run before printing can continue. Do you want to update now? You can also update later from 'Upgrade firmware'." -msgstr "偵測到重要更新，需要升級後才可進行列印。你想現在就開始升級嗎？你也可以稍後點擊‘升級韌體’完成升級。" - -#, fuzzy -msgid "The firmware version is abnormal. Repairing and updating are required before printing. Do you want to update now? You can also update later on printer or update next time starting Orca." -msgstr "目前韌體版本異常，需要進行修復升級，否則無法繼續列印。你想現在就開始升級嗎？你也可以稍後在列印設備上升級，或者下一次啟動 Orca Slicer 再升級。" - -msgid "Extension Board" -msgstr "擴展板" - -msgid "Saving objects into the 3mf failed." -msgstr "將物件儲存到 3mf 失敗。" - -msgid "Only Windows 10 is supported." -msgstr "僅支援 Windows 10。" - -msgid "Failed to initialize the WinRT library." -msgstr "無法初始化 WinRT 函式庫。" - -msgid "Exporting objects" -msgstr "正在匯出物件" - -msgid "Failed loading objects." -msgstr "載入物件失敗。" - -msgid "Repairing object by Windows service" -msgstr "透過 Windows 服務修復物件" - -msgid "Repair failed." -msgstr "修復失敗。" - -msgid "Loading repaired objects" -msgstr "正在載入修復的物件" - -msgid "Exporting 3mf file failed" -msgstr "匯出 3mf 檔案失敗" - -msgid "Import 3mf file failed" -msgstr "匯入 3mf 檔案失敗" - -msgid "Repaired 3mf file does not contain any object" -msgstr "已修復的 3mf 檔案不包含任何物件" - -msgid "Repaired 3mf file contains more than one object" -msgstr "已修復的 3mf 檔案包含了不止一個物件" - -msgid "Repaired 3mf file does not contain any volume" -msgstr "修復的 3mf 檔案不包含任何零件" - -msgid "Repaired 3mf file contains more than one volume" -msgstr "已修復的 3mf 檔案包含多個零件" - -msgid "Repair finished" -msgstr "修復已完成" - -msgid "Repair canceled" -msgstr "修復被取消" - -#, boost-format -msgid "Copying of file %1% to %2% failed: %3%" -msgstr "從 %1% 複製檔案到 %2% 失敗：%3%" - -#, fuzzy -msgid "Need to check the unsaved changes before configuration updates." -msgstr "在設定更新之前需要檢查未儲存的設定變更。" - -msgid "Configuration package: " -msgstr "" - -msgid " updated to " -msgstr "" - -msgid "Open G-code file:" -msgstr "打開 G-code 檔案：" - -msgid "One object has empty initial layer and can't be printed. Please Cut the bottom or enable supports." -msgstr "模型出現空層無法列印。請切掉底部或打開支撐。" - -#, boost-format -msgid "Object can't be printed for empty layer between %1% and %2%." -msgstr "模型在 %1% 和 %2% 之間出現空層，無法列印。" - -#, boost-format -msgid "Object: %1%" -msgstr "模型：%1%" - -msgid "Maybe parts of the object at these height are too thin, or the object has faulty mesh" -msgstr "部分模型在這些高度可能過薄，或者模型存在缺陷" - -msgid "No object can be printed. Maybe too small" -msgstr "沒有可列印的物件。可能是因為尺寸過小" - -msgid "Your print is very close to the priming regions. Make sure there is no collision." -msgstr "" - -msgid "Failed to generate gcode for invalid custom G-code.\n" -"\n" -msgstr "錯誤的自訂 G-code 導致 G-code 產生失敗。\n" -"\n" - -msgid "Please check the custom G-code or use the default custom G-code." -msgstr "請檢查自訂 G-code，或者使用預設的。" - -#, boost-format -msgid "Generating G-code: layer %1%" -msgstr "正在產生 G-code：第 %1% 層" - -msgid "Inner wall" -msgstr "內牆" - -msgid "Outer wall" -msgstr "外牆" - -msgid "Overhang wall" -msgstr "懸空牆" - -msgid "Sparse infill" -msgstr "稀疏填充" - -msgid "Internal solid infill" -msgstr "內部實心填充" - -msgid "Top surface" -msgstr "頂面" - -msgid "Bottom surface" -msgstr "底面" - -#, fuzzy -msgid "Internal Bridge" -msgstr "內部橋接" - -msgid "Gap infill" -msgstr "填縫" - -msgid "Support interface" -msgstr "支撐面" - -msgid "Support transition" -msgstr "支撐轉換層" - -msgid "Multiple" -msgstr "多個" - -#, boost-format -msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " -msgstr "計算 %1% 的線寬失敗。無法獲得 \"%2%\" 的值" - -msgid "Invalid spacing supplied to Flow::with_spacing(), check your layer height and extrusion width" -msgstr "提供給 Flow::with_spacing（）的間距無效，請檢查層高和擠出寬度" - -msgid "undefined error" -msgstr "未定義的錯誤" - -msgid "too many files" -msgstr "檔案過多" - -msgid "file too large" -msgstr "檔案太大" - -msgid "unsupported method" -msgstr "不支援的壓縮方法" - -msgid "unsupported encryption" -msgstr "不支援的加密方式" - -msgid "unsupported feature" -msgstr "不支援的功能" - -msgid "failed finding central directory" -msgstr "找不到主目錄" - -msgid "not a ZIP archive" -msgstr "不是一個 zip 壓縮檔" - -msgid "invalid header or corrupted" -msgstr "無效檔案頭或檔案已損壞" - -msgid "unsupported multidisk" -msgstr "不支援多磁碟儲存" - -msgid "decompression failed" -msgstr "解壓縮失敗或存檔已損壞" - -msgid "compression failed" -msgstr "壓縮失敗" - -msgid "unexpected decompressed size" -msgstr "意外的解壓縮大小" - -msgid "CRC check failed" -msgstr "CRC 檢查失敗" - -msgid "unsupported central directory size" -msgstr "不支援的主目錄容量" - -msgid "allocation failed" -msgstr "分配記憶體失敗" - -msgid "file open failed" -msgstr "檔案開啟失敗" - -msgid "file create failed" -msgstr "檔案建立失敗" - -msgid "file write failed" -msgstr "檔案寫入失敗" - -msgid "file read failed" -msgstr "檔案讀取失敗" - -msgid "file close failed" -msgstr "檔案關閉失敗" - -msgid "file seek failed" -msgstr "檔案隨機存取失敗" - -msgid "file stat failed" -msgstr "檔案統計資訊失敗" - -msgid "invalid parameter" -msgstr "無效參數" - -msgid "invalid filename" -msgstr "無效的檔案名" - -msgid "buffer too small" -msgstr "緩衝區太小" - -msgid "internal error" -msgstr "內部錯誤" - -msgid "file not found" -msgstr "檔案未找到" - -msgid "archive too large" -msgstr "存檔檔案太大" - -msgid "validation failed" -msgstr "驗證失敗" - -msgid "write callback failed" -msgstr "寫入回調失敗" - -#, boost-format -msgid "%1% is too close to exclusion area, there may be collisions when printing." -msgstr "%1% 離不可列印區域太近，可能會發生碰撞。" - -#, boost-format -msgid "%1% is too close to others, and collisions may be caused." -msgstr "%1% 離其它物件太近，可能會發生碰撞。" - -#, boost-format -msgid "%1% is too tall, and collisions will be caused." -msgstr "%1% 太高，會發生碰撞。" - -msgid " is too close to others, there may be collisions when printing." -msgstr "離其它物件太近，列印時可能會發生碰撞。" - -msgid " is too close to exclusion area, there may be collisions when printing." -msgstr "離不可列印區域太近，列印時可能會發生碰撞。" - -msgid "Prime Tower" -msgstr "換料塔" - -msgid " is too close to others, and collisions may be caused.\n" -msgstr "離其它物件太近，可能會發生碰撞。\n" - -msgid " is too close to exclusion area, and collisions will be caused.\n" -msgstr "離不可列印區域太近，會發生碰撞。\n" - -msgid "Can not print multiple filaments which have large difference of temperature together. Otherwise, the extruder and nozzle may be blocked or damaged during printing" -msgstr "不能將溫度差異過大的線材一起列印。否則擠出機和噴嘴在列印中可能被堵塞或損壞" - -msgid "No extrusions under current settings." -msgstr "根據目前設定，不會進行任何列印。" - -msgid "Smooth mode of timelapse is not supported when \"by object\" sequence is enabled." -msgstr "逐件列印模式下不支援使用平滑模式的縮時錄影。" - -msgid "Please select \"By object\" print sequence to print multiple objects in spiral vase mode." -msgstr "請選擇逐件列印以支援在花瓶模式下列印多個物件。" - -msgid "The spiral vase mode does not work when an object contains more than one materials." -msgstr "不支援在包含多個線材的列印中使用花瓶模式。" - -#, boost-format -msgid "While the object %1% itself fits the build volume, it exceeds the maximum build volume height because of material shrinkage compensation." -msgstr "" - -#, boost-format -msgid "The object %1% exceeds the maximum build volume height." -msgstr "物件 %1% 超出了最大體積高度。" - -#, boost-format -msgid "While the object %1% itself fits the build volume, its last layer exceeds the maximum build volume height." -msgstr "雖然物件 %1% 本身符合列印體積，但最後一層超出了最大列印體積高度。" - -msgid "You might want to reduce the size of your model or change current print settings and retry." -msgstr "你可能想要減小模型的尺寸或更改目前的列印設定並重試。" - -msgid "Variable layer height is not supported with Organic supports." -msgstr "有機樹支撐不支持可變層高。" - -msgid "Different nozzle diameters and different filament diameters may not work well when the prime tower is enabled. It's very experimental, so please proceed with caution." -msgstr "" - -msgid "The Wipe Tower is currently only supported with the relative extruder addressing (use_relative_e_distances=1)." -msgstr "換料塔目前僅支援相對擠出機定址 (use_relative_e_distances=1)。" - -msgid "Ooze prevention is only supported with the wipe tower when 'single_extruder_multi_material' is off." -msgstr "" - -msgid "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, RepRapFirmware and Repetier G-code flavors." -msgstr "" - -msgid "The prime tower is not supported in \"By object\" print." -msgstr "逐件列印模式下無法使用換料塔。" - -msgid "The prime tower is not supported when adaptive layer height is on. It requires that all objects have the same layer height." -msgstr "可變層高開啟時無法使用換料塔。它要求所有物件擁有相同的層高。" - -msgid "The prime tower requires \"support gap\" to be multiple of layer height" -msgstr "換料塔要求\"支撐間隙\"為層高的整數倍數" - -msgid "The prime tower requires that all objects have the same layer heights" -msgstr "換料塔要求各個物件擁有同樣的層高" - -msgid "The prime tower requires that all objects are printed over the same number of raft layers" -msgstr "換料塔要求各個物件使用同樣的筏層數量" - -msgid "The prime tower requires that all objects are sliced with the same layer heights." -msgstr "換料塔要求各個物件擁有同樣的層高。" - -msgid "The prime tower is only supported if all objects have the same variable layer height" -msgstr "各個物件的層高存在差異，無法啟用換料塔" - -msgid "Too small line width" -msgstr "線寬太小" - -msgid "Too large line width" -msgstr "線寬太大" - -msgid "The prime tower requires that support has the same layer height with object." -msgstr "換料塔要求支撐和物件採用同樣的層高。" - -msgid "Organic support tree tip diameter must not be smaller than support material extrusion width." -msgstr "有機樹狀支撐尖端直徑不得小於支撐材料擠出寬度。" - -msgid "Organic support branch diameter must not be smaller than 2x support material extrusion width." -msgstr "有機樹狀支撐分支直徑不得小於支撐材料擠出寬度的 2 倍。" - -msgid "Organic support branch diameter must not be smaller than support tree tip diameter." -msgstr "有機樹狀支撐枝直徑不得小於支撐樹梢直徑。" - -msgid "Support enforcers are used but support is not enabled. Please enable support." -msgstr "使用支撐添加器但沒有打開支撐。請打開支撐。" - -msgid "Layer height cannot exceed nozzle diameter" -msgstr "層高不能超過噴嘴直徑" - -#, fuzzy -msgid "Relative extruder addressing requires resetting the extruder position at each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to layer_gcode." -msgstr "相對擠出機尋址需要重置每層的擠出機位置，以防止浮點精度損失。 將 \"G92 E0\" 加入到 layer_gcode。" - -msgid "\"G92 E0\" was found in before_layer_gcode, which is incompatible with absolute extruder addressing." -msgstr "在 before_layer_gcode 中發現 \"G92 E0\"，該程式碼與絕對擠出機尋址不相容。" - -msgid "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute extruder addressing." -msgstr "在 layer_gcode 中發現 \"G92 E0\"，它與絕對擠出機尋址不相容。" - -#, c-format, boost-format -msgid "Plate %d: %s does not support filament %s" -msgstr "列印板 %d：%s 不支援線材 %s" - -msgid "Setting the jerk speed too low could lead to artifacts on curved surfaces" -msgstr "" - -msgid "The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/machine_max_jerk_y).\n" -"Orca will automatically cap the jerk speed to ensure it doesn't surpass the printer's capabilities.\n" -"You can adjust the maximum jerk setting in your printer's configuration to get higher speeds." -msgstr "" - -msgid "The acceleration setting exceeds the printer's maximum acceleration (machine_max_acceleration_extruding).\n" -"Orca will automatically cap the acceleration speed to ensure it doesn't surpass the printer's capabilities.\n" -"You can adjust the machine_max_acceleration_extruding value in your printer's configuration to get higher speeds." -msgstr "" - -msgid "The travel acceleration setting exceeds the printer's maximum travel acceleration (machine_max_acceleration_travel).\n" -"Orca will automatically cap the travel acceleration speed to ensure it doesn't surpass the printer's capabilities.\n" -"You can adjust the machine_max_acceleration_travel value in your printer's configuration to get higher speeds." -msgstr "" - -msgid "Filament shrinkage will not be used because filament shrinkage for the used filaments differs significantly." -msgstr "" - -msgid "Generating skirt & brim" -msgstr "正在產生 skirt 和 brim（裙邊）" - -msgid "Exporting G-code" -msgstr "正在匯出 G-code" - -msgid "Generating G-code" -msgstr "正在產生 G-code" - -#, fuzzy -msgid "Failed processing of the filename_format template." -msgstr "處理檔案名稱格式範本失敗。" - -msgid "Printable area" -msgstr "可列印區域" - -msgid "Bed exclude area" -msgstr "不可列印區域" - -#, fuzzy -msgid "Unprintable area in XY plane. For example, X1 Series printers use the front left corner to cut filament during filament change. The area is expressed as polygon by points in following format: \"XxY, XxY, ...\"" -msgstr "XY 平面上的不可列印區域。例如，X1系列設備在換料過程中，會使用左前角區域來切斷線材。這個多邊形區域由以下格式的點表示：\"XxY，XxY，…\"" - -#, fuzzy -msgid "Bed custom texture" -msgstr "自訂列印板紋理" - -#, fuzzy -msgid "Bed custom model" -msgstr "自訂列印板模型" - -msgid "Elephant foot compensation" -msgstr "象腳補償" - -msgid "Shrink the initial layer on build plate to compensate for elephant foot effect" -msgstr "將首層收縮用於補償象腳效應" - -msgid "Elephant foot compensation layers" -msgstr "象腳補償層數" - -msgid "The number of layers on which the elephant foot compensation will be active. The first layer will be shrunk by the elephant foot compensation value, then the next layers will be linearly shrunk less, up to the layer indicated by this value." -msgstr "象腳補償將處於活動狀態的層數。 第一層將縮小象腳補償值，然後接下來的層將線性縮小，直到該值指示的層。" - -msgid "layers" -msgstr "層" - -msgid "Slicing height for each layer. Smaller layer height means more accurate and more printing time" -msgstr "每一層的切片高度。越小的層高意味著更高的精度和更長的列印時間" - -msgid "Printable height" -msgstr "可列印高度" - -msgid "Maximum printable height which is limited by mechanism of printer" -msgstr "受列印設備硬體限制的最大可列印高度" - -msgid "Preferred orientation" -msgstr "" - -msgid "Automatically orient stls on the Z-axis upon initial import" -msgstr "匯入STL時自動對齊Z軸" - -#, fuzzy -msgid "Printer preset names" -msgstr "列印設備預設名稱" - -msgid "Use 3rd-party print host" -msgstr "" - -msgid "Allow controlling BambuLab's printer through 3rd party print hosts" -msgstr "" - -msgid "Hostname, IP or URL" -msgstr "主機名，IP 或者 URL" - -#, fuzzy -msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the hostname, IP address or URL of the printer host instance. Print host behind HAProxy with basic auth enabled can be accessed by putting the user name and password into the URL in the following format: https://username:password@your-octopi-address/" -msgstr "Orca Slicer 可以將 G-code 檔案上傳到列印設備。此欄位應包含列印設備的主機名、IP 位址或 URL。啟用基本身份驗證的列印設備可以透過將使用者名稱和密碼放入以下格式的URL中來訪問：https://username:password@your-octopi-address/" - -msgid "Device UI" -msgstr "設備使用者界面" - -msgid "Specify the URL of your device user interface if it's not same as print_host" -msgstr "如果列印設備的使用者界面 URL 不同，請輸入在此" - -msgid "API Key / Password" -msgstr "API Key / 密碼" - -#, fuzzy -msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication." -msgstr "Orca slicer 可以將 G-code 檔案上傳到列印設備。此欄位應包含用於身份驗證的 API 金鑰或密碼。" - -msgid "Name of the printer" -msgstr "列印設備名稱" - -msgid "HTTPS CA File" -msgstr "HTTPS CA憑證 檔" - -#, fuzzy -msgid "Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used." -msgstr "可以為 HTTPS OctoPrint 連接指定自訂 CA憑證 檔案，格式為 crt/pem。如果留空，則使用預設的操作系統 CA憑證 儲存庫。" - -msgid "User" -msgstr "使用者名稱" - -msgid "Password" -msgstr "密碼" - -#, fuzzy -msgid "Ignore HTTPS certificate revocation checks" -msgstr "忽略 HTTPS憑證 吊銷檢查" - -#, fuzzy -msgid "Ignore HTTPS certificate revocation checks in case of missing or offline distribution points. One may want to enable this option for self signed certificates if connection fails." -msgstr "在缺少或離線的情況下忽略 HTTPS憑證 吊銷檢查。如果連接失敗，可以啟用此選項來處理自簽名憑證。" - -#, fuzzy -msgid "Names of presets related to the physical printer" -msgstr "與實體列印設備相關的預設名稱" - -msgid "Authorization Type" -msgstr "授權類型" - -msgid "API key" -msgstr "API 金鑰" - -msgid "HTTP digest" -msgstr "HTTP摘要" - -msgid "Avoid crossing wall" -msgstr "避免跨越外牆" - -msgid "Detour and avoid to travel across wall which may cause blob on surface" -msgstr "空駛時繞過外牆以避免在模型外觀表面產生斑點" - -msgid "Avoid crossing wall - Max detour length" -msgstr "避免跨越外牆-最大繞行長度" - -msgid "Maximum detour distance for avoiding crossing wall. Don't detour if the detour distance is large than this value. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. Zero to disable" -msgstr "" - -msgid "mm or %" -msgstr "mm 或 %" - -msgid "Other layers" -msgstr "其它層" - -msgid "Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the Cool Plate" -msgstr "除首層外的床溫。0 值表示這個線材不支援低溫列印板" - -msgid "°C" -msgstr "°C" - -msgid "Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the Textured Cool Plate" -msgstr "" - -#, fuzzy -msgid "Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the Engineering Plate" -msgstr "除首層外的熱床溫度。0 值表示這個線材不支援工程高溫列印板" - -#, fuzzy -msgid "Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the High Temp Plate" -msgstr "除首層外的熱床溫度。0 值表示這個線材不支援高溫列印板" - -#, fuzzy -msgid "Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the Textured PEI Plate" -msgstr "除首層外的熱床溫度。0 值表示這個線材不支援紋理 PEI 列印板" - -msgid "Initial layer" -msgstr "首層" - -msgid "Initial layer bed temperature" -msgstr "首層床溫" - -msgid "Bed temperature of the initial layer. Value 0 means the filament does not support to print on the Cool Plate SuperTack" -msgstr "" - -#, fuzzy -msgid "Bed temperature of the initial layer. Value 0 means the filament does not support to print on the Cool Plate" -msgstr "首層熱床溫度。0 值表示這個線材不支援低溫列印板" - -msgid "Bed temperature of the initial layer. Value 0 means the filament does not support to print on the Textured Cool Plate" -msgstr "" - -#, fuzzy -msgid "Bed temperature of the initial layer. Value 0 means the filament does not support to print on the Engineering Plate" -msgstr "首層熱床溫度。0 值表示這個線材不支援工程高溫列印板" - -#, fuzzy -msgid "Bed temperature of the initial layer. Value 0 means the filament does not support to print on the High Temp Plate" -msgstr "首層熱床溫度。0 值表示這個線材不支援高溫列印板" - -#, fuzzy -msgid "Bed temperature of the initial layer. Value 0 means the filament does not support to print on the Textured PEI Plate" -msgstr "首層熱床溫度。0 值表示這個線材不支援紋理 PEI 列印板" - -#, fuzzy -msgid "Bed types supported by the printer" -msgstr "列印設備所支援的列印板類型" - -msgid "Smooth Cool Plate" -msgstr "" - -#, fuzzy -msgid "Engineering Plate" -msgstr "工程高溫列印板" - -msgid "Smooth High Temp Plate" -msgstr "" - -msgid "Textured Cool Plate" -msgstr "" - -msgid "First layer print sequence" -msgstr "首層列印順序" - -msgid "Other layers print sequence" -msgstr "" - -msgid "The number of other layers print sequence" -msgstr "" - -msgid "Other layers filament sequence" -msgstr "" - -msgid "This G-code is inserted at every layer change before lifting z" -msgstr "在每次換層抬升z高度之前插入這段 G-code" - -msgid "Bottom shell layers" -msgstr "底部殼體層數" - -msgid "This is the number of solid layers of bottom shell, including the bottom surface layer. When the thickness calculated by this value is thinner than bottom shell thickness, the bottom shell layers will be increased" -msgstr "底部殼體實心層層數，包括底面。當由該層數計算的厚度小於底部殼體厚度，切片時會增加底部殼體的層數" - -msgid "Bottom shell thickness" -msgstr "底部殼體厚度" - -#, fuzzy -msgid "The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shell layers is thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that this setting is disabled and thickness of bottom shell is absolutely determined by bottom shell layers" -msgstr "如果由底部殼體層數算出的厚度小於這個數值，那麼切片時將自動增加底部殼體層數。這能夠避免當層高很小時，底部殼體過薄。0 表示關閉這個設定，同時底部殼體的厚度完全由底部殼體層數決定" - -msgid "Apply gap fill" -msgstr "間隙填充" - -msgid "Enables gap fill for the selected solid surfaces. The minimum gap length that will be filled can be controlled from the filter out tiny gaps option below.\n" -"\n" -"Options:\n" -"1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces for maximum strength\n" -"2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces only, balancing print speed, reducing potential over extrusion in the solid infill and making sure the top and bottom surfaces have no pin hole gaps\n" -"3. Nowhere: Disables gap fill for all solid infill areas. \n" -"\n" -"Note that if using the classic perimeter generator, gap fill may also be generated between perimeters, if a full width line cannot fit between them. That perimeter gap fill is not controlled by this setting. \n" -"\n" -"If you would like all gap fill, including the classic perimeter generated one, removed, set the filter out tiny gaps value to a large number, like 999999. \n" -"\n" -"However this is not advised, as gap fill between perimeters is contributing to the model's strength. For models where excessive gap fill is generated between perimeters, a better option would be to switch to the arachne wall generator and use this option to control whether the cosmetic top and bottom surface gap fill is generated" -msgstr "" - -msgid "Everywhere" -msgstr "全部" - -msgid "Top and bottom surfaces" -msgstr "頂部與底部" - -msgid "Nowhere" -msgstr "無" - -msgid "Force cooling for overhang and bridge" -msgstr "懸空/橋接強制冷卻" - -#, fuzzy -msgid "Enable this option to optimize part cooling fan speed for overhang and bridge to get better cooling" -msgstr "勾選這個選項將自動最佳化橋接和懸空的風扇轉速以獲得更好的冷卻" - -msgid "Fan speed for overhang" -msgstr "懸空風扇速度" - -#, fuzzy -msgid "Force part cooling fan to be this speed when printing bridge or overhang wall which has large overhang degree. Forcing cooling for overhang and bridge can get better quality for these part" -msgstr "當列印橋接和超過臨界值設定的懸空時，強制物件冷卻風扇為設定的速度數值。強制冷卻能夠使懸空和橋接獲得更好的列印品質" - -msgid "Cooling overhang threshold" -msgstr "冷卻懸空臨界值" - -#, c-format -msgid "Force cooling fan to be specific speed when overhang degree of printed part exceeds this value. Expressed as percentage which indicates how much width of the line without support from lower layer. 0% means forcing cooling for all outer wall no matter how much overhang degree" -msgstr "" - -msgid "Bridge infill direction" -msgstr "橋接填充角度" - -msgid "Bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for external bridges. Use 180°for zero angle." -msgstr "橋接角度覆蓋。如果為零，該角度將自動計算。否則外部的橋接將用提供的值。180° 表示 0 度。" - -#, fuzzy -msgid "Bridge density" -msgstr "橋接密度" - -#, fuzzy -msgid "Density of external bridges. 100% means solid bridge. Default is 100%." -msgstr "外部橋接的密度。 100% 意味著堅固的橋樑。 預設值為 100%。" - -msgid "Bridge flow ratio" -msgstr "橋接流量" - -msgid "Decrease this value slightly(for example 0.9) to reduce the amount of material for bridge, to improve sag. \n" -"\n" -"The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." -msgstr "" - -msgid "Internal bridge flow ratio" -msgstr "內部橋接流量" - -msgid "This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill. Decrease this value slightly (for example 0.9) to improve surface quality over sparse infill.\n" -"\n" -"The actual internal bridge flow used is calculated by multiplying this value with the bridge flow ratio, the filament flow ratio, and if set, the object's flow ratio." -msgstr "" - -msgid "Top surface flow ratio" -msgstr "頂部表面流量比例" - -msgid "This factor affects the amount of material for top solid infill. You can decrease it slightly to have smooth surface finish. \n" -"\n" -"The actual top surface flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." -msgstr "" - -msgid "Bottom surface flow ratio" -msgstr "底部表面流量比例" - -msgid "This factor affects the amount of material for bottom solid infill. \n" -"\n" -"The actual bottom solid infill flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." -msgstr "" - -msgid "Precise wall" -msgstr "精準外牆尺寸" - -msgid "Improve shell precision by adjusting outer wall spacing. This also improves layer consistency.\n" -"Note: This setting will only take effect if the wall sequence is configured to Inner-Outer" -msgstr "" - -msgid "Only one wall on top surfaces" -msgstr "頂面單層牆" - -msgid "Use only one wall on flat top surface, to give more space to the top infill pattern" -msgstr "頂面只使用單層牆，從而更多的空間能夠使用頂部填充圖案" - -msgid "One wall threshold" -msgstr "單壁閾值" - -#, no-c-format, no-boost-format -msgid "If a top surface has to be printed and it's partially covered by another layer, it won't be considered at a top layer where its width is below this value. This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters. This value can be a mm or a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created if you have some thin features on the next layer, like letters. Set this setting to 0 to remove these artifacts." -msgstr "如果頂面需要列印，但是它的一部分被其它層覆蓋，那麼當它的寬度小於這個值時，它不會被認為是頂層。這個設定可以用於避免在狹窄頂面上觸發\"頂面單層牆\"。這個值可以是 mm 或線寬的 %。\n" -"警告：如果啟用該選項，可能會在下一層上產生一些薄的特徵，比如字母。將此設定設為 0 可以消除這些偽影。" - -msgid "Only one wall on first layer" -msgstr "首層僅單層牆" - -msgid "Use only one wall on first layer, to give more space to the bottom infill pattern" -msgstr "首層只使用單層牆，從而更多的空間能夠使用底部填充圖案" - -msgid "Extra perimeters on overhangs" -msgstr "懸挑上的額外周長" - -msgid "Create additional perimeter paths over steep overhangs and areas where bridges cannot be anchored. " -msgstr "在陡峭的懸空和無法固定橋接的區域中增加額外的周長路徑。" - -msgid "Reverse on even" -msgstr "偶數反向" - -#, fuzzy -msgid "Overhang reversal" -msgstr "懸空反向" - -msgid "Extrude perimeters that have a part over an overhang in the reverse direction on even layers. This alternating pattern can drastically improve steep overhangs.\n" -"\n" -"This setting can also help reduce part warping due to the reduction of stresses in the part walls." -msgstr "在偶數層上，對於有懸挑部分的外圍輪廓，採用反向擠出。這種交替模式可以大幅改善陡峭的懸挑。\n" -"\n" -"此設定還有助於減少因零件牆壁應力降低而導致的變形。" - -msgid "Reverse only internal perimeters" -msgstr "僅在內圍輪廓反向" - -msgid "Apply the reverse perimeters logic only on internal perimeters. \n" -"\n" -"This setting greatly reduces part stresses as they are now distributed in alternating directions. This should reduce part warping while also maintaining external wall quality. This feature can be very useful for warp prone material, like ABS/ASA, and also for elastic filaments, like TPU and Silk PLA. It can also help reduce warping on floating regions over supports.\n" -"\n" -"For this setting to be the most effective, it is recommended to set the Reverse Threshold to 0 so that all internal walls print in alternating directions on even layers irrespective of their overhang degree." -msgstr "" - -msgid "Bridge counterbore holes" -msgstr "橋接沉孔" - -msgid "This option creates bridges for counterbore holes, allowing them to be printed without support. Available modes include:\n" -"1. None: No bridge is created.\n" -"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" -"3. Sacrificial Layer: A full sacrificial bridge layer is created." -msgstr "此選項為沉孔創建橋接，使其可以無需支撐地列印。可用模式包括：\n" -"1. 無：不創建橋接。\n" -"2. 部分橋接：只有部分無支撐區域會被橋接。\n" -"3. 犧牲層：創建一層完整的祭層橋接。" - -msgid "Partially bridged" -msgstr "部分橋接" - -msgid "Sacrificial layer" -msgstr "犧牲層" - -msgid "Reverse threshold" -msgstr "反轉臨界值" - -msgid "Overhang reversal threshold" -msgstr "懸空反轉臨界值" - -#, no-c-format, no-boost-format -msgid "Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width.\n" -"Value 0 enables reversal on every even layers regardless.\n" -"When Detect overhang wall is not enabled, this option is ignored and reversal happens on every even layers regardless." -msgstr "懸挑需要達到的毫米數，才會反向列印。可以是周邊寬度的百分比。\n" -"值為 0 時，將在每個偶數層啟用反向列印。" - -msgid "Classic mode" -msgstr "經典模式" - -msgid "Enable this option to use classic mode" -msgstr "開啟此選項以使用經典模式" - -msgid "Slow down for overhang" -msgstr "懸空處降速" - -msgid "Enable this option to slow printing down for different overhang degree" -msgstr "打開這個選項將降低不同懸垂程度的走線的列印速度" - -msgid "Slow down for curled perimeters" -msgstr "翹邊處降速" - -#, no-c-format, no-boost-format -msgid "Enable this option to slow down printing in areas where perimeters may have curled upwards.For example, additional slowdown will be applied when printing overhangs on sharp corners like the front of the Benchy hull, reducing curling which compounds over multiple layers.\n" -"\n" -" It is generally recommended to have this option switched on unless your printer cooling is powerful enough or the print speed slow enough that perimeter curling does not happen. If printing with a high external perimeter speed, this parameter may introduce slight artifacts when slowing down due to the large variance in print speeds. If you notice artifacts, ensure your pressure advance is tuned correctly.\n" -"\n" -"Note: When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is applied even if the overhanging perimeter is part of a bridge. For example, when the perimeters are 100% overhanging, with no wall supporting them from underneath, the 100% overhang speed will be applied." -msgstr "" - -msgid "mm/s or %" -msgstr "mm/s 或 %" - -msgid "External" -msgstr "外部" - -msgid "Speed of the externally visible bridge extrusions. \n" -"\n" -"In addition, if Slow down for curled perimeters is disabled or Classic overhang mode is enabled, it will be the print speed of overhang walls that are supported by less than 13%, whether they are part of a bridge or an overhang." -msgstr "外部可見橋接擠出速度。\n" -"\n" -"如果禁用了「翹邊處降速」或啟用了「經典懸挑模式」，則它將是支撐不足 13% 的懸挑牆的列印速度，無論它們是橋接的一部分還是懸挑。" - -msgid "mm/s" -msgstr "" - -msgid "Internal" -msgstr "內部" - -msgid "Speed of internal bridges. If the value is expressed as a percentage, it will be calculated based on the bridge_speed. Default value is 150%." -msgstr "內部橋接速度。如果該值以百分比表示，將基於 bridge_speed 進行計算。預設值為 150%。" - -msgid "Brim width" -msgstr "Brim（裙邊）寬度" - -msgid "Distance from model to the outermost brim line" -msgstr "從模型到 brim（裙邊）最外圈的距離" - -msgid "Brim type" -msgstr "Brim（裙邊）類型" - -#, fuzzy -msgid "This controls the generation of the brim at outer and/or inner side of models. Auto means the brim width is analyzed and calculated automatically." -msgstr "該參數控制在模型的外側和/或內側產生 brim（裙邊）。自動是指自動分析和計算邊框的寬度。" - -msgid "Brim-object gap" -msgstr "Brim（裙邊）與模型的間隙" - -msgid "A gap between innermost brim line and object can make brim be removed more easily" -msgstr "在 brim（裙邊）和模型之間設定間隙，能夠讓 brim（裙邊）更容易拆除" - -msgid "Brim ears" -msgstr "圓盤" - -msgid "Only draw brim over the sharp edges of the model." -msgstr "僅在模型的鋒利邊緣上產生Brim（裙邊）。" - -msgid "Brim ear max angle" -msgstr "圓盤最大角度" - -#, fuzzy -msgid "Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" -"If set to ~180, brim will be created on everything but straight sections." -msgstr "讓圓盤出現的最大角度。\n" -"如果設定為 0，則不會建立圓盤。\n" -"設定越趨近 180，除直線部分外，其他部分都會建立圓盤。" - -msgid "Brim ear detection radius" -msgstr "圓盤偵測半徑" - -msgid "The geometry will be decimated before detecting sharp angles. This parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" -msgstr "在偵測尖銳角度之前，幾何形狀將被簡化。此參數表示簡化的最小偏差長度。\n" -"設為 0 以停用" - -msgid "Compatible machine" -msgstr "相容的設備" - -#, fuzzy -msgid "upward compatible machine" -msgstr "向上相容的設備" - -#, fuzzy -msgid "Compatible machine condition" -msgstr "相容的設備條件" - -#, fuzzy -msgid "Compatible process profiles" -msgstr "相容的切片設定" - -#, fuzzy -msgid "Compatible process profiles condition" -msgstr "相容的切片設定條件" - -msgid "Print sequence, layer by layer or object by object" -msgstr "列印順序，逐層列印或者逐件列印" - -msgid "By layer" -msgstr "逐層" - -msgid "By object" -msgstr "逐件" - -msgid "Intra-layer order" -msgstr "" - -msgid "Print order within a single layer" -msgstr "" - -msgid "As object list" -msgstr "" - -msgid "Slow printing down for better layer cooling" -msgstr "降低列印速度 以得到更好的冷卻" - -msgid "Enable this option to slow printing speed down to make the final layer time not shorter than the layer time threshold in \"Max fan speed threshold\", so that layer can be cooled for longer time. This can improve the cooling quality for needle and small details" -msgstr "勾選這個選項，將降低列印速度，使得最終的層列印時間不小於\"最大風扇速度臨界值\"裡的層時間臨界值，從而使得該層獲得更久的冷卻。這能夠改善尖頂和小細節的冷卻效果" - -msgid "Normal printing" -msgstr "普通列印" - -msgid "The default acceleration of both normal printing and travel except initial layer" -msgstr "除首層之外的預設的列印和空駛的加速度" - -msgid "mm/s²" -msgstr "mm/s²" - -msgid "Default filament profile" -msgstr "預設線材設定檔" - -#, fuzzy -msgid "Default filament profile when switch to this machine profile" -msgstr "切換設備自動更換預設線材設定檔" - -msgid "Default process profile" -msgstr "預設切片設定檔" - -#, fuzzy -msgid "Default process profile when switch to this machine profile" -msgstr "切換設備自動更換預設切片設定檔" - -msgid "Activate air filtration" -msgstr "開啟空氣過濾器/排風扇" - -msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" -msgstr "啟動空氣過濾器/排風扇。 G-code 指令：M106 P3 S（0-255）" - -msgid "Fan speed" -msgstr "風扇速度" - -msgid "Speed of exhaust fan during printing.This speed will overwrite the speed in filament custom gcode" -msgstr "列印過程中排風扇的速度。此速度將覆蓋線材自訂 G-code 中的速度" - -msgid "Speed of exhaust fan after printing completes" -msgstr "列印完成後排風扇的轉速" - -msgid "No cooling for the first" -msgstr "前Ｎ層關閉零件風扇" - -#, fuzzy -msgid "Close all cooling fan for the first certain layers. Cooling fan of the first layer used to be closed to get better build plate adhesion" -msgstr "對開始的一些層關閉所有的物件冷卻風扇。通常關閉首層冷卻用來獲得更好的首層黏附" - -msgid "Don't support bridges" -msgstr "不支撐橋接" - -msgid "Don't support the whole bridge area which make support very large. Bridge usually can be printing directly without support if not very long" -msgstr "不對整個橋接面進行支撐，否則支撐體會很大。不是很長的橋接通常可以無支撐直接列印" - -msgid "Thick bridges" -msgstr "厚橋" - -msgid "If enabled, bridges are more reliable, can bridge longer distances, but may look worse. If disabled, bridges look better but are reliable just for shorter bridged distances." -msgstr "如果啟用，橋接會更可靠，可以橋接更長的距離，但可能看起來更糟。如果關閉，橋梁看起來更好，但只適用於較短的橋接距離。" - -msgid "Thick internal bridges" -msgstr "增厚內部橋接" - -msgid "If enabled, thick internal bridges will be used. It's usually recommended to have this feature turned on. However, consider turning it off if you are using large nozzles." -msgstr "如果啟用，將使用較厚的內部橋接。通常建議開啟此功能。但如果使用較大的噴嘴，可考慮關閉此選項。" - -msgid "Filter out small internal bridges (beta)" -msgstr "篩選掉短的內部橋接(beta)" - -msgid "This option can help reducing pillowing on top surfaces in heavily slanted or curved models.\n" -"\n" -"By default, small internal bridges are filtered out and the internal solid infill is printed directly over the sparse infill. This works well in most cases, speeding up printing without too much compromise on top surface quality. \n" -"\n" -"However, in heavily slanted or curved models especially where too low sparse infill density is used, this may result in curling of the unsupported solid infill, causing pillowing.\n" -"\n" -"Disabling this option will print internal bridge layer over slightly unsupported internal solid infill. The options below control the amount of filtering, i.e. the amount of internal bridges created.\n" -"\n" -"Filter - enable this option. This is the default behavior and works well in most cases.\n" -"\n" -"Limited filtering - creates internal bridges on heavily slanted surfaces, while avoiding creating unnecessary internal bridges. This works well for most difficult models.\n" -"\n" -"No filtering - creates internal bridges on every potential internal overhang. This option is useful for heavily slanted top surface models. However, in most cases it creates too many unnecessary bridges." -msgstr "此選項有助於減少在大幅傾斜或曲面的模型上頂部表面瑕疵。\n" -"\n" -"預設情況下，小型內部橋接會被篩選掉，內部實心填充會直接印刷在稀疏填充上。這在大多數情況下運作良好，能加速列印並且不會過度影響頂部表面質量。\n" -"\n" -"在大幅傾斜或曲面的模型中，特別是當使用過低的稀疏填充密度時，這可能會導致支撐不夠的實心填充翹曲，進而造成瑕疵。\n" -"\n" -"禁用此選項將在稍微未支撐的內部實心填充區列印內部橋接層。以下選項控制篩選的程度(創建內部橋接的數量)。\n" -"\n" -"篩選 - 啟用此選項。這是預設行為，並且在大多數情況下運作良好。\n" -"\n" -"有限篩選 - 僅在大幅傾斜的表面上創建內部橋接。這對大多數困難模型來說效果良好。\n" -"\n" -"不篩選 - 在每個可能的內部懸挑處創建內部橋接。這個選項對於大幅傾斜的頂部表面模型很有用。然而，在大多數情況下，它會創建過多不必要的橋接。" - -msgid "Filter" -msgstr "篩選" - -msgid "Limited filtering" -msgstr "局部篩選" - -msgid "No filtering" -msgstr "不篩選" - -msgid "Max bridge length" -msgstr "最大橋接長度" - -msgid "Max length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported." -msgstr "不需要支撐的橋接最大長度。如果希望支援所有橋接，請將其設定為 0；如果不希望支援任何橋接，請將其設定為非常大的值。" - -msgid "End G-code" -msgstr "結尾 G-code" - -msgid "End G-code when finish the whole printing" -msgstr "所有列印結束時的結尾 G-code" - -msgid "Between Object Gcode" -msgstr "物件分隔" - -msgid "Insert Gcode between objects. This parameter will only come into effect when you print your models object by object" -msgstr "在物件之間插入 Gcode。此參數僅在逐次列印時生效" - -msgid "End G-code when finish the printing of this filament" -msgstr "使用該線材列印結束時的結尾 G-code" - -msgid "Ensure vertical shell thickness" -msgstr "確保垂直外殼厚度" - -msgid "Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)\n" -"None: No solid infill will be added anywhere. Caution: Use this option carefully if your model has sloped surfaces\n" -"Critical Only: Avoid adding solid infill for walls\n" -"Moderate: Add solid infill for heavily sloping surfaces only\n" -"All: Add solid infill for all suitable sloping surfaces\n" -"Default value is All." -msgstr "" - -msgid "Critical Only" -msgstr "" - -msgid "Moderate" -msgstr "" - -msgid "Top surface pattern" -msgstr "頂面圖案" - -msgid "Line pattern of top surface infill" -msgstr "頂面填充的走線圖案" - -msgid "Concentric" -msgstr "同心" - -msgid "Rectilinear" -msgstr "直線" - -msgid "Monotonic" -msgstr "單調" - -msgid "Monotonic line" -msgstr "單調線" - -msgid "Aligned Rectilinear" -msgstr "直線排列" - -msgid "Hilbert Curve" -msgstr "希爾伯特曲線" - -msgid "Archimedean Chords" -msgstr "阿基米德和弦" - -msgid "Octagram Spiral" -msgstr "八角螺旋" - -msgid "Bottom surface pattern" -msgstr "底面圖案" - -msgid "Line pattern of bottom surface infill, not bridge infill" -msgstr "除了橋接外的底面填充的走線圖案" - -msgid "Internal solid infill pattern" -msgstr "內部實心填充圖案" - -msgid "Line pattern of internal solid infill. if the detect narrow internal solid infill be enabled, the concentric pattern will be used for the small area." -msgstr "內部實心填充的線型圖案。如果啟用了偵測狹窄的內部實心填充，將使用同心圓圖案來填充小區域。" - -msgid "Line width of outer wall. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "外牆的線寬。如果以 % 表示，將以噴嘴直徑為基準來計算。" - -msgid "Speed of outer wall which is outermost and visible. It's used to be slower than inner wall speed to get better quality." -msgstr "外牆的列印速度。它通常比內壁速度慢，以獲得更好的列印品質。" - -msgid "Small perimeters" -msgstr "微小部位" - -msgid "This separate setting will affect the speed of perimeters having radius <= small_perimeter_threshold (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the outer wall speed setting above. Set to zero for auto." -msgstr "" - -msgid "Small perimeters threshold" -msgstr "微小部位周長臨界值" - -msgid "This sets the threshold for small perimeter length. Default threshold is 0mm" -msgstr "這設定了微小部位周長的臨界值。 預設臨界值是 0mm" - -msgid "Walls printing order" -msgstr "牆列印順序" - -msgid "Print sequence of the internal (inner) and external (outer) walls. \n" -"\n" -"Use Inner/Outer for best overhangs. This is because the overhanging walls can adhere to a neighbouring perimeter while printing. However, this option results in slightly reduced surface quality as the external perimeter is deformed by being squashed to the internal perimeter.\n" -"\n" -"Use Inner/Outer/Inner for the best external surface finish and dimensional accuracy as the external wall is printed undisturbed from an internal perimeter. However, overhang performance will reduce as there is no internal perimeter to print the external wall against. This option requires a minimum of 3 walls to be effective as it prints the internal walls from the 3rd perimeter onwards first, then the external perimeter and, finally, the first internal perimeter. This option is recommended against the Outer/Inner option in most cases. \n" -"\n" -"Use Outer/Inner for the same external wall quality and dimensional accuracy benefits of Inner/Outer/Inner option. However, the z seams will appear less consistent as the first extrusion of a new layer starts on a visible surface.\n" -"\n" -" " -msgstr "" - -msgid "Inner/Outer" -msgstr "裡/外" - -msgid "Outer/Inner" -msgstr "外/裡" - -msgid "Inner/Outer/Inner" -msgstr "裡/外/裡" - -msgid "Print infill first" -msgstr "先列印填充" - -msgid "Order of wall/infill. When the tickbox is unchecked the walls are printed first, which works best in most cases.\n" -"\n" -"Printing infill first may help with extreme overhangs as the walls have the neighbouring infill to adhere to. However, the infill will slightly push out the printed walls where it is attached to them, resulting in a worse external surface finish. It can also cause the infill to shine through the external surfaces of the part." -msgstr "" - -msgid "Wall loop direction" -msgstr "牆方向" - -msgid "The direction which the wall loops are extruded when looking down from the top.\n" -"\n" -"By default all walls are extruded in counter-clockwise, unless Reverse on even is enabled. Set this to any option other than Auto will force the wall direction regardless of the Reverse on even.\n" -"\n" -"This option will be disabled if spiral vase mode is enabled." -msgstr "從上方觀看時，牆擠出方向。\n" -"\n" -"預設情況下，所有牆面都是以逆時針方向擠出，除非啟用了「偶數反向」。將此設置為「自動」以外的任何選項，將強制牆面方向，無論是否啟用了「偶數反向」。\n" -"\n" -"如果啟用了花瓶模式，這個選項將被禁用。" - -msgid "Counter clockwise" -msgstr "逆時針" - -msgid "Clockwise" -msgstr "順時針" - -msgid "Height to rod" -msgstr "到橫杆高度" - -msgid "Distance of the nozzle tip to the lower rod. Used for collision avoidance in by-object printing." -msgstr "噴嘴尖端到下方滑杆的距離。用於在逐件列印中避免碰撞。" - -msgid "Height to lid" -msgstr "到頂蓋高度" - -msgid "Distance of the nozzle tip to the lid. Used for collision avoidance in by-object printing." -msgstr "噴嘴尖端到頂蓋的距離。用於在逐件列印中避免碰撞。" - -msgid "Clearance radius around extruder. Used for collision avoidance in by-object printing." -msgstr "擠出機四周的避讓半徑。用於在逐件列印中避免碰撞。" - -msgid "Nozzle height" -msgstr "" - -msgid "The height of nozzle tip." -msgstr "" - -msgid "Bed mesh min" -msgstr "" - -msgid "This option sets the min point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (-99999, -99999), which means there are no limits, thus allowing probing across the entire bed." -msgstr "" - -msgid "Bed mesh max" -msgstr "" - -msgid "This option sets the max point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (99999, 99999), which means there are no limits, thus allowing probing across the entire bed." -msgstr "" - -msgid "Probe point distance" -msgstr "" - -msgid "This option sets the preferred distance between probe points (grid size) for the X and Y directions, with the default being 50mm for both X and Y." -msgstr "" - -msgid "Mesh margin" -msgstr "" - -msgid "This option determines the additional distance by which the adaptive bed mesh area should be expanded in the XY directions." -msgstr "此選項決定自適應床面網格區域在 XY 方向上應該擴展的額外距離。" - -msgid "Extruder Color" -msgstr "擠出機顏色" - -msgid "Only used as a visual help on UI" -msgstr "作為介面上的輔助" - -msgid "Extruder offset" -msgstr "擠出機偏移" - -msgid "Flow ratio" -msgstr "流量比例" - -msgid "The material may have volumetric change after switching between molten state and crystalline state. This setting changes all extrusion flow of this filament in gcode proportionally. Recommended value range is between 0.95 and 1.05. Maybe you can tune this value to get nice flat surface when there has slight overflow or underflow" -msgstr "線材經過融化後凝固可能會產生體積差異。這個設定會等比例改變所有擠出走線的擠出量。推薦的範圍為 0.95 到 1.05。發現模型的平面有輕微的缺料或多料時，或許可以嘗試微調這個參數" - -msgid "The material may have volumetric change after switching between molten state and crystalline state. This setting changes all extrusion flow of this filament in gcode proportionally. Recommended value range is between 0.95 and 1.05. Maybe you can tune this value to get nice flat surface when there has slight overflow or underflow. \n" -"\n" -"The final object flow ratio is this value multiplied by the filament flow ratio." -msgstr "線材經過融化後凝固可能會產生體積差異。這個設定會等比例改變所有擠出走線的擠出量。推薦的範圍為 0.95 到 1.05。發現模型的平面有輕微的缺料或多料時，或許可以嘗試微調這個參數。\n" -"最終物體流量比是此值與線材流量比的乘積。" - -msgid "Enable pressure advance" -msgstr "啟用壓力提前" - -msgid "Enable pressure advance, auto calibration result will be overwritten once enabled." -msgstr "啟用壓力提前，一旦啟用會覆蓋自動校準的結果。" - -#, fuzzy -msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" -msgstr "壓力提前（Klipper）或者線性提前（Marlin）" - -msgid "Enable adaptive pressure advance (beta)" -msgstr "啟用進階壓力提前 (beta)" - -#, no-c-format, no-boost-format -msgid "With increasing print speeds (and hence increasing volumetric flow through the nozzle) and increasing accelerations, it has been observed that the effective PA value typically decreases. This means that a single PA value is not always 100% optimal for all features and a compromise value is usually used that does not cause too much bulging on features with lower flow speed and accelerations while also not causing gaps on faster features.\n" -"\n" -"This feature aims to address this limitation by modeling the response of your printer's extrusion system depending on the volumetric flow speed and acceleration it is printing at. Internally, it generates a fitted model that can extrapolate the needed pressure advance for any given volumetric flow speed and acceleration, which is then emitted to the printer depending on the current print conditions.\n" -"\n" -"When enabled, the pressure advance value above is overridden. However, a reasonable default value above is strongly recommended to act as a fallback and for when tool changing.\n" -"\n" -msgstr "" - -msgid "Adaptive pressure advance measurements (beta)" -msgstr "自適應壓力提前測量(beta)" - -#, no-c-format, no-boost-format -msgid "Add sets of pressure advance (PA) values, the volumetric flow speeds and accelerations they were measured at, separated by a comma. One set of values per line. For example\n" -"0.04,3.96,3000\n" -"0.033,3.96,10000\n" -"0.029,7.91,3000\n" -"0.026,7.91,10000\n" -"\n" -"How to calibrate:\n" -"1. Run the pressure advance test for at least 3 speeds per acceleration value. It is recommended that the test is run for at least the speed of the external perimeters, the speed of the internal perimeters and the fastest feature print speed in your profile (usually its the sparse or solid infill). Then run them for the same speeds for the slowest and fastest print accelerations,and no faster than the recommended maximum acceleration as given by the Klipper input shaper.\n" -"2. Take note of the optimal PA value for each volumetric flow speed and acceleration. You can find the flow number by selecting flow from the color scheme drop down and move the horizontal slider over the PA pattern lines. The number should be visible at the bottom of the page. The ideal PA value should be decreasing the higher the volumetric flow is. If it is not, confirm that your extruder is functioning correctly.The slower and with less acceleration you print, the larger the range of acceptable PA values. If no difference is visible, use the PA value from the faster test.3. Enter the triplets of PA values, Flow and Accelerations in the text box here and save your filament profile\n" -"\n" -msgstr "" - -msgid "Enable adaptive pressure advance for overhangs (beta)" -msgstr "啟用懸挑自適應壓力提前(beta)" - -msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n" -msgstr "啟用自適應 PA 以應對懸挑以及同一特徵內流量變化。這是一個實驗性選項，因為如果 PA 配置未準確設定，可能會在懸挑前後的外部表面上造成均勻性問題。\n" - -msgid "Pressure advance for bridges" -msgstr "橋接壓力提前" - -msgid "Pressure advance value for bridges. Set to 0 to disable. \n" -"\n" -" A lower PA value when printing bridges helps reduce the appearance of slight under extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this." -msgstr "橋接的壓力提前值。設為 0 可禁用。\n" -"\n" -"在列印橋接時，較低的 PA 值有助於減少橋接結束後出現的輕微欠擠壓現象。這是由於列印空中時噴嘴內部壓力下降，較低的 PA 值有助於抵消這個問題。" - -msgid "Default line width if other line widths are set to 0. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "當線寬設定為 0 時走線的默認線寬。如果以 % 表示，將以噴嘴直徑為基準來計算。" - -msgid "Keep fan always on" -msgstr "保持風扇永遠開啟" - -msgid "If enable this setting, part cooling fan will never be stopped and will run at least at minimum speed to reduce the frequency of starting and stopping" -msgstr "如果勾選這個選項，物件冷卻風扇將不會停止，並且會以最小風扇轉速設定值運轉以減少風扇的頻繁開關" - -msgid "Don't slow down outer walls" -msgstr "列印外牆不減速" - -msgid "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. This is particularly helpful in the below scenarios:\n" -"\n" -" 1. To avoid changes in shine when printing glossy filaments \n" -"2. To avoid changes in external wall speed which may create slight wall artifacts that appear like z banding \n" -"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the external walls\n" -"\n" -msgstr "" - -msgid "Layer time" -msgstr "層時間" - -msgid "Part cooling fan will be enabled for layers of which estimated time is shorter than this value. Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time" -msgstr "當層預估列印時間小於該數值時，物件冷卻風扇將會被開啟。風扇轉速將根據層列印時間在最大和最小風扇轉速之間自動調整" - -msgid "Default color" -msgstr "預設顏色" - -msgid "Default filament color" -msgstr "預設線材顏色" - -msgid "Filament notes" -msgstr "線材備註" - -msgid "You can put your notes regarding the filament here." -msgstr "你可以將有關線材的備註存放在這裡。" - -msgid "Required nozzle HRC" -msgstr "噴嘴硬度要求" - -msgid "Minimum HRC of nozzle required to print the filament. Zero means no checking of nozzle's HRC." -msgstr "列印此線材的所需的最小噴嘴硬度。零值表示不檢查噴嘴硬度。" - -msgid "This setting stands for how much volume of filament can be melted and extruded per second. Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. Can't be zero" -msgstr "這個設定表示每秒能夠融化和擠出的線材體積。列印速度會受限於到最大體積速度，防止設定過高和不合理的速度。不允許設定為 0" - -msgid "mm³/s" -msgstr "mm³/s" - -msgid "Filament load time" -msgstr "進料的時間" - -msgid "Time to load new filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only" -msgstr "" - -msgid "Filament unload time" -msgstr "退料的時間" - -msgid "Time to unload old filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only" -msgstr "" - -msgid "Tool change time" -msgstr "" - -msgid "Time taken to switch tools. It's usually applicable for tool changers or multi-tool machines. For single-extruder multi-material machines, it's typically 0. For statistics only" -msgstr "" - -msgid "Filament diameter is used to calculate extrusion in gcode, so it's important and should be accurate" -msgstr "線材直徑被用於計算 G-code 檔案中的擠出量。因此很重要，應盡可能精確" - -msgid "Pellet flow coefficient" -msgstr "" - -msgid "Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n" -"\n" -"Internally it is converted to filament_diameter. All other volume calculations remain the same.\n" -"\n" -"filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" -msgstr "" - -msgid "Shrinkage (XY)" -msgstr "" - -#, no-c-format, no-boost-format -msgid "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in xy to compensate. Only the filament used for the perimeter is taken into account.\n" -"Be sure to allow enough space between objects, as this compensation is done after the checks." -msgstr "冷卻後線材會收縮的百分比（如果測量的長度是 94mm 而不是 100mm，則為是收縮率為 94%）\n" -"補償將按比例縮放 xy 軸該補償僅考慮牆壁所使用的線材\n" -"請確保物體之間有足夠的間距，因為補償是在邊界檢查之後進行。" - -msgid "Shrinkage (Z)" -msgstr "" - -#, no-c-format, no-boost-format -msgid "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in Z to compensate." -msgstr "" - -msgid "Loading speed" -msgstr "進料速度" - -msgid "Speed used for loading the filament on the wipe tower." -msgstr "將線材擠出到換料塔上的速度。" - -msgid "Loading speed at the start" -msgstr "啟動時進料速度" - -#, fuzzy -msgid "Speed used at the very beginning of loading phase." -msgstr "初始進料階段速度。" - -msgid "Unloading speed" -msgstr "退料速度" - -#, fuzzy -msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " -"initial part of unloading just after ramming)." -msgstr "用於在換料塔上退料速度（不影響尖端成型之後初始部分的速度）。" - -msgid "Unloading speed at the start" -msgstr "退料初始速度" - -msgid "" -"Speed used for unloading the tip of the filament immediately after ramming." -msgstr "線材尖端成型後立即退料的速度。" - -msgid "Delay after unloading" -msgstr "退料後延遲" - -msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " -"original dimensions." -msgstr "退料後等待的時間。有助於使用柔性線材（收縮到原始尺寸需更多的時間）以獲得可靠的换色。" - -msgid "Number of cooling moves" -msgstr "冷卻移動次數" - -msgid "" -"Filament is cooled by being moved back and forth in the cooling tubes. " -"Specify desired number of these moves." -msgstr "藉由在喉管中來回移動以冷卻線材。指定移動所需的次數。" - -msgid "Stamping loading speed" -msgstr "" - -msgid "Speed used for stamping." -msgstr "" - -msgid "Stamping distance measured from the center of the cooling tube" -msgstr "" - -msgid "" -"If set to nonzero value, filament is moved toward the nozzle between the " -"individual cooling moves (\"stamping\"). This option configures how long " -"this movement should be before the filament is retracted again." -msgstr "" - -msgid "Speed of the first cooling move" -msgstr "第一次冷卻移動的速度" - -msgid "Cooling moves are gradually accelerating beginning at this speed." -msgstr "從這個速度開始冷卻移動逐漸加速。" - -msgid "Minimal purge on wipe tower" -msgstr "換料塔上的最小清理量" - -msgid "After a tool change, the exact position of the newly loaded filament inside the nozzle may not be known, and the filament pressure is likely not yet stable. Before purging the print head into an infill or a sacrificial object, Orca Slicer will always prime this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably." -msgstr "換色後，新載入的線材在噴嘴內的確切位置可能未知，線材壓力可能還不穩定。在沖刷列印頭到填充或作為擠出廢料之前，將始終將這些的線材沖刷到換料塔中以產生連續的填充或穩定的擠出廢料。" - -msgid "Speed of the last cooling move" -msgstr "最後一次冷卻移動的速度" - -msgid "Cooling moves are gradually accelerating towards this speed." -msgstr "冷卻移動向這個速度逐漸加速。" - -msgid "Ramming parameters" -msgstr "尖端成型參數" - -msgid "This string is edited by RammingDialog and contains ramming specific parameters." -msgstr "此內容由尖端成型欄位編輯，包含尖端成型的特定參數。" - -msgid "Enable ramming for multi-tool setups" -msgstr "使用多色尖端成形設定" - -msgid "Perform ramming when using multi-tool printer (i.e. when the 'Single Extruder Multimaterial' in Printer Settings is unchecked). When checked, a small amount of filament is rapidly extruded on the wipe tower just before the toolchange. This option is only used when the wipe tower is enabled." -msgstr "多色列印設備執行尖端成型時（即，當列印設備設定中的單擠出機多材料未選取時）。選取時，在換色之前，會迅速擠出少量線材絲到換料塔上。此選項僅在啟用換料塔時使用。" - -msgid "Multi-tool ramming volume" -msgstr "多色尖端成型體積" - -msgid "The volume to be rammed before the toolchange." -msgstr "換色前尖端成型的體積。" - -msgid "Multi-tool ramming flow" -msgstr "多色尖端成型流量" - -msgid "Flow used for ramming the filament before the toolchange." -msgstr "換色前線材尖端成型的流量。" - -msgid "Density" -msgstr "密度" - -msgid "Filament density. For statistics only" -msgstr "線材的密度。只用於統計資訊" - -msgid "g/cm³" -msgstr "g/cm³" - -msgid "The material type of filament" -msgstr "線材的材料類型" - -msgid "Soluble material" -msgstr "可溶性材料" - -msgid "Soluble material is commonly used to print support and support interface" -msgstr "可溶性材料通常用於列印支撐和支撐面" - -msgid "Support material" -msgstr "支撐材料" - -msgid "Support material is commonly used to print support and support interface" -msgstr "支撐材料通常用於列印支撐體和支撐接觸面" - -msgid "Softening temperature" -msgstr "線材軟化溫度" - -msgid "The material softens at this temperature, so when the bed temperature is equal to or greater than it, it's highly recommended to open the front door and/or remove the upper glass to avoid clogging." -msgstr "線材在此溫度下容易軟化，因此當熱床床溫等於或高於該溫度時，強烈建議打開前門和/或拆下上部玻璃以避免堵塞。" - -msgid "Price" -msgstr "價格" - -msgid "Filament price. For statistics only" -msgstr "線材的價格。只用於統計資訊" - -msgid "money/kg" -msgstr "元/公斤" - -msgid "Vendor" -msgstr "廠牌" - -msgid "Vendor of filament. For show only" -msgstr "列印線材的廠牌。僅用於展示" - -msgid "(Undefined)" -msgstr "（未定義）" - -msgid "Sparse infill direction" -msgstr "" - -msgid "Angle for sparse infill pattern, which controls the start or main direction of line" -msgstr "稀疏填充圖案的角度，決定走線的開始或整體方向" - -msgid "Solid infill direction" -msgstr "" - -msgid "Angle for solid infill pattern, which controls the start or main direction of line" -msgstr "" - -msgid "Rotate solid infill direction" -msgstr "" - -msgid "Rotate the solid infill direction by 90° for each layer." -msgstr "" - -msgid "Sparse infill density" -msgstr "稀疏填充密度" - -#, no-c-format, no-boost-format -msgid "Density of internal sparse infill, 100% turns all sparse infill into solid infill and internal solid infill pattern will be used" -msgstr "" - -msgid "Sparse infill pattern" -msgstr "稀疏填充圖案" - -msgid "Line pattern for internal sparse infill" -msgstr "內部稀疏填充的走線圖案" - -msgid "Grid" -msgstr "網格" - -msgid "Line" -msgstr "線" - -msgid "Cubic" -msgstr "立方體" - -msgid "Tri-hexagon" -msgstr "內六邊形" - -msgid "Gyroid" -msgstr "螺旋體" - -msgid "Honeycomb" -msgstr "蜂窩" - -msgid "Adaptive Cubic" -msgstr "自適應立方體" - -msgid "3D Honeycomb" -msgstr "3D 蜂窩" - -msgid "Support Cubic" -msgstr "支撐立方體" - -msgid "Lightning" -msgstr "閃電" - -msgid "Cross Hatch" -msgstr "" - -msgid "Sparse infill anchor length" -msgstr "稀疏填充錨線長度" - -msgid "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. \n" -"Set this parameter to zero to disable anchoring perimeters connected to a single infill line." -msgstr "" - -#, fuzzy -msgid "0 (no open anchors)" -msgstr "0（無錨線）" - -msgid "1000 (unlimited)" -msgstr "1000（無限制）" - -msgid "Maximum length of the infill anchor" -msgstr "填充錨線的最大長度" - -msgid "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. \n" -"If set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0." -msgstr "" - -msgid "0 (Simple connect)" -msgstr "0（簡單連接）" - -msgid "Acceleration of outer walls" -msgstr "外牆的加速度。它通常使用比內壁速度慢的加速度，以獲得更好的列印品質" - -msgid "Acceleration of inner walls" -msgstr "內牆加速度，使用較低值可以改善列印品質" - -msgid "Acceleration of travel moves" -msgstr "空駛加速度" - -msgid "Acceleration of top surface infill. Using a lower value may improve top surface quality" -msgstr "頂面填充的加速度。使用較低值可能會改善頂面列印品質" - -msgid "Acceleration of outer wall. Using a lower value can improve quality" -msgstr "外牆加速度。使用較小的值可以提高列印品質" - -msgid "Acceleration of bridges. If the value is expressed as a percentage (e.g. 50%), it will be calculated based on the outer wall acceleration." -msgstr "橋接加速度。 如果該值以百分比表示（例如 50%），則將根據外牆加速度進行計算。" - -msgid "mm/s² or %" -msgstr "mm/s² 或 %" - -msgid "Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." -msgstr "稀疏填充的加速度。如果該值表示為百分比（例如 100%），則將根據預設加速度進行計算。" - -msgid "Acceleration of internal solid infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." -msgstr "內部實心填充加速度。 如果該值以百分比表示（例如 100%），則將根據預設加速度進行計算。" - -msgid "Acceleration of initial layer. Using a lower value can improve build plate adhesive" -msgstr "首層加速度。使用較低值可以改善和列印板的黏附" - -msgid "Enable accel_to_decel" -msgstr "啟用煞車速度" - -msgid "Klipper's max_accel_to_decel will be adjusted automatically" -msgstr "Klipper 會依照煞車速度值自動調整" - -msgid "accel_to_decel" -msgstr "煞車速度" - -#, c-format, boost-format -msgid "Klipper's max_accel_to_decel will be adjusted to this %% of acceleration" -msgstr "Klipper 的最大煞車速度將調整為加速度的 %%" - -msgid "Jerk of outer walls" -msgstr "外牆抖動值" - -msgid "Jerk of inner walls" -msgstr "內牆抖動值" - -msgid "Jerk for top surface" -msgstr "頂面抖動值" - -msgid "Jerk for infill" -msgstr "填充抖動" - -msgid "Jerk for initial layer" -msgstr "首層抖動值" - -msgid "Jerk for travel" -msgstr "空駛抖動值" - -msgid "Line width of initial layer. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "首層的線寬。如果以 % 表示，它將以噴嘴直徑為基準來計算。" - -msgid "Initial layer height" -msgstr "首層層高" - -msgid "Height of initial layer. Making initial layer height to be thick slightly can improve build plate adhesion" -msgstr "首層層高" - -msgid "Speed of initial layer except the solid infill part" -msgstr "首層除實心填充之外的其他部分的列印速度" - -msgid "Initial layer infill" -msgstr "首層填充" - -msgid "Speed of solid infill part of initial layer" -msgstr "首層實心填充的列印速度" - -msgid "Initial layer travel speed" -msgstr "首層空駛速度" - -msgid "Travel speed of initial layer" -msgstr "首層空駛速度" - -msgid "Number of slow layers" -msgstr "慢速列印層數" - -msgid "The first few layers are printed slower than normal. The speed is gradually increased in a linear fashion over the specified number of layers." -msgstr "減慢前幾層的列印速度。列印速度會逐漸加速到滿速。" - -msgid "Initial layer nozzle temperature" -msgstr "首層列印溫度" - -msgid "Nozzle temperature to print initial layer when using this filament" -msgstr "列印首層時的噴嘴溫度" - -msgid "Full fan speed at layer" -msgstr "滿速風扇在" - -msgid "Fan speed will be ramped up linearly from zero at layer \"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower than \"close_fan_the_first_x_layers\", in which case the fan will be running at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." -msgstr "風扇速度將從\"禁用第一層\"的零線性上升到\"全風扇速度層\"的最大。如果低於\"禁用風扇第一層\"，則\"全風扇速度第一層\"將被忽略，在這種情況下，風扇將在\"禁用風扇第一層\"+1層以最大允許速度運行。" - -msgid "layer" -msgstr "層" - -msgid "Support interface fan speed" -msgstr "支撐界面風扇速度" - -msgid "This fan speed is enforced during all support interfaces, to be able to weaken their bonding with a high fan speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overridden by disable_fan_first_layers." -msgstr "所有支撐界面列印期間強制風扇速度，高速可以減少支撐與物件的融合。\n" -"設定為 -1 以停用。" - -msgid "Randomly jitter while printing the wall, so that the surface has a rough look. This setting controls the fuzzy position" -msgstr "列印外牆時隨機抖動，使外表面產生絨毛效果。這個設定決定適用的位置" - -msgid "Contour" -msgstr "輪廓" - -msgid "Contour and hole" -msgstr "輪廓和孔" - -msgid "All walls" -msgstr "所有牆" - -msgid "Fuzzy skin thickness" -msgstr "絨毛表面厚度" - -msgid "The width within which to jitter. It's advised to be below outer wall line width" -msgstr "產生絨毛的抖動的寬度。建議小於外圈牆的線寬" - -msgid "Fuzzy skin point distance" -msgstr "絨毛表面點間距" - -msgid "The average distance between the random points introduced on each line segment" -msgstr "產生絨毛表面時，插入的隨機點之間的平均距離" - -msgid "Apply fuzzy skin to first layer" -msgstr "" - -msgid "Whether to apply fuzzy skin on the first layer" -msgstr "" - -msgid "Filter out tiny gaps" -msgstr "忽略微小間隙" - -msgid "Layers and Perimeters" -msgstr "層和牆" - -msgid "Don't print gap fill with a length is smaller than the threshold specified (in mm). This setting applies to top, bottom and solid infill and, if using the classic perimeter generator, to wall gap fill. " -msgstr "" - -msgid "Speed of gap infill. Gap usually has irregular line width and should be printed more slowly" -msgstr "填縫的速度。縫隙通常有不一致的線寬，應改用較慢速度列印" - -msgid "Precise Z height" -msgstr "" - -msgid "Enable this to get precise z height of object after slicing. It will get the precise object height by fine-tuning the layer heights of the last few layers. Note that this is an experimental parameter." -msgstr "" - -msgid "Arc fitting" -msgstr "圓弧擬合" - -msgid "Enable this to get a G-code file which has G2 and G3 moves. The fitting tolerance is same as the resolution. \n" -"\n" -"Note: For Klipper machines, this option is recommended to be disabled. Klipper does not benefit from arc commands as these are split again into line segments by the firmware. This results in a reduction in surface quality as line segments are converted to arcs by the slicer and then back to line segments by the firmware." -msgstr "" - -msgid "Add line number" -msgstr "標註行號" - -msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" -msgstr "" - -msgid "Scan first layer" -msgstr "首層檢查" - -msgid "Enable this to enable the camera on printer to check the quality of first layer" -msgstr "打開這個設定將使用列印設備上的鏡頭用於檢查首層列印品質" - -msgid "Nozzle type" -msgstr "噴嘴類型" - -msgid "The metallic material of nozzle. This determines the abrasive resistance of nozzle, and what kind of filament can be printed" -msgstr "噴嘴的金屬材料。這將決定噴嘴的耐磨性，以及可列印線材的種類" - -msgid "Undefine" -msgstr "未定義" - -msgid "Hardened steel" -msgstr "硬化鋼" - -msgid "Stainless steel" -msgstr "不鏽鋼" - -msgid "Brass" -msgstr "黃銅" - -msgid "Nozzle HRC" -msgstr "噴嘴洛氏硬度" - -msgid "The nozzle's hardness. Zero means no checking for nozzle's hardness during slicing." -msgstr "噴嘴硬度。零值表示在切片時不檢查噴嘴硬度。" - -msgid "HRC" -msgstr "洛氏硬度" - -msgid "Printer structure" -msgstr "列印設備結構" - -msgid "The physical arrangement and components of a printing device" -msgstr "列印設備的實體佈置和組件" - -msgid "CoreXY" -msgstr "" - -msgid "I3" -msgstr "" - -msgid "Hbot" -msgstr "" - -msgid "Delta" -msgstr "" - -msgid "Best object position" -msgstr "最佳物件位置" - -msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." -msgstr "針對列印版的形狀，範圍 [0,1] 內的最佳自動擺放位置 。" - -msgid "Enable this option if machine has auxiliary part cooling fan. G-code command: M106 P2 S(0-255)." -msgstr "如果設備有輔助物件冷卻風扇，請啟用此選項。 G-code 指令：M106 P2 S（0-255）。" - -msgid "Start the fan this number of seconds earlier than its target start time (you can use fractional seconds). It assumes infinite acceleration for this time estimation, and will only take into account G1 and G0 moves (arc fitting is unsupported).\n" -"It won't move fan commands from custom gcodes (they act as a sort of 'barrier').\n" -"It won't move fan commands into the start gcode if the 'only custom start gcode' is activated.\n" -"Use 0 to deactivate." -msgstr "在風扇目標啟動時間前提前設定的秒數啟動風扇（支持小數點）。此功能基於無限加速假設進行時間估算，並僅考慮 G1 和 G0 指令的移動（不支援圓弧擬合）。\n" -"風扇指令不會從自定義 G-code 中轉移（它們被視為「屏障」）。\n" -"若啟用「僅使用自定義起始 G-code」，風扇指令將不會移動到起始 G-code 中。\n" -"將此值設為 0 可停用該功能。" - -msgid "Only overhangs" -msgstr "僅懸空" - -#, fuzzy -msgid "Will only take into account the delay for the cooling of overhangs." -msgstr "僅參考懸空的冷卻延遲" - -msgid "Fan kick-start time" -msgstr "風扇" - -msgid "Emit a max fan speed command for this amount of seconds before reducing to target speed to kick-start the cooling fan.\n" -"This is useful for fans where a low PWM/power may be insufficient to get the fan started spinning from a stop, or to get the fan up to speed faster.\n" -"Set to 0 to deactivate." -msgstr "先用最快風扇速度運轉冷卻風扇N秒後再降低到目標速度。\n" -"這對於低 PWM/功率不足以讓風扇從停止狀態啟動，或使風扇加速更快的情況非常有用。\n" -"設定為 0 以停用。" - -msgid "Time cost" -msgstr "時間成本" - -msgid "The printer cost per hour" -msgstr "列印設備每小時的成本" - -msgid "money/h" -msgstr "元/小時" - -msgid "Support control chamber temperature" -msgstr "支援控制列印設備內部溫度" - -msgid "This option is enabled if machine support controlling chamber temperature\n" -"G-code command: M141 S(0-255)" -msgstr "如果支援列印設備內部溫度控制，則啟用此選項\n" -"G-code 指令：M141 S（0-255）" - -msgid "Support air filtration" -msgstr "支援空氣過濾" - -msgid "Enable this if printer support air filtration\n" -"G-code command: M106 P3 S(0-255)" -msgstr "如果列印設備支援空氣過濾，請啟用此選項\n" -"G-code 指令：M106 P3 S（0-255）" - -msgid "G-code flavor" -msgstr "G-code 風格" - -msgid "What kind of gcode the printer is compatible with" -msgstr "列印設備相容的 G-code 樣式" - -msgid "Klipper" -msgstr "" - -msgid "Pellet Modded Printer" -msgstr "" - -msgid "Enable this option if your printer uses pellets instead of filaments" -msgstr "" - -msgid "Support multi bed types" -msgstr "" - -msgid "Enable this option if you want to use multiple bed types" -msgstr "" - -msgid "Label objects" -msgstr "標註物件" - -msgid "Enable this to add comments into the G-Code labeling print moves with what object they belong to, which is useful for the Octoprint CancelObject plugin. This settings is NOT compatible with Single Extruder Multi Material setup and Wipe into Object / Wipe into Infill." -msgstr "啟用此選項可將註解新增至 G-code 中，標記列印移動及其所屬物件，這對於 Octoprint CancelObject 外掛程式非常有用。此設定與單擠出機多色設定和擦除到物件/擦除到填充不相容。" - -msgid "Exclude objects" -msgstr "物件排除" - -msgid "Enable this option to add EXCLUDE OBJECT command in g-code" -msgstr "開啟此選項以支援物件排除" - -msgid "Verbose G-code" -msgstr "詳細 G-code" - -msgid "Enable this to get a commented G-code file, with each line explained by a descriptive text. If you print from SD card, the additional weight of the file could make your firmware slow down." -msgstr "啟用此選項可取得帶註釋的 G-code，其中每一行均由描述性文字進行解釋。 如果你從 SD 卡列印，檔案的額外容量可能會導致韌體速度變慢。" - -msgid "Infill combination" -msgstr "合併填充" - -msgid "Automatically Combine sparse infill of several layers to print together to reduce time. Wall is still printed with original layer height." -msgstr "自動合併若干層稀疏填充一起列印以可縮短時間。內外牆依然保持原始層高列印。" - -msgid "Infill combination - Max layer height" -msgstr "" - -msgid "Maximum layer height for the combined sparse infill. \n" -"\n" -"Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in print time) or a value of ~80% to maximize sparse infill strength.\n" -"\n" -"The number of layers over which infill is combined is derived by dividing this value with the layer height and rounded down to the nearest decimal.\n" -"\n" -"Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values (eg 80%). This value must not be larger than the nozzle diameter." -msgstr "" - -msgid "Filament to print internal sparse infill." -msgstr "列印內部稀疏填充的線材。" - -msgid "Line width of internal sparse infill. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "內部稀疏填充的線寬。如果以%表示，它將以噴嘴直徑為基準來計算。" - -msgid "Infill/Wall overlap" -msgstr "填充/牆 重疊" - -#, no-c-format, no-boost-format -msgid "Infill area is enlarged slightly to overlap with wall for better bonding. The percentage value is relative to line width of sparse infill. Set this value to ~10-15% to minimize potential over extrusion and accumulation of material resulting in rough top surfaces." -msgstr "" - -msgid "Top/Bottom solid infill/wall overlap" -msgstr "" - -#, no-c-format, no-boost-format -msgid "Top solid infill area is enlarged slightly to overlap with wall for better bonding and to minimize the appearance of pinholes where the top infill meets the walls. A value of 25-30% is a good starting point, minimizing the appearance of pinholes. The percentage value is relative to line width of sparse infill" -msgstr "" - -msgid "Speed of internal sparse infill" -msgstr "內部稀疏填充的列印速度" - -msgid "Interface shells" -msgstr "接觸面外殼" - -msgid "Force the generation of solid shells between adjacent materials/volumes. Useful for multi-extruder prints with translucent materials or manual soluble support material" -msgstr "強制在相鄰材料/體積之間產生實體殼。 適用於使用半透明材料或手動可溶支撐材料的多擠出機列印" - -msgid "Maximum width of a segmented region" -msgstr "分隔區域的最大寬度" - -msgid "Maximum width of a segmented region. Zero disables this feature." -msgstr "分隔區域的最大寬度。零表示禁用此功能。" - -msgid "Interlocking depth of a segmented region" -msgstr "" - -msgid "Interlocking depth of a segmented region. It will be ignored if \"mmu_segmented_region_max_width\" is zero or if \"mmu_segmented_region_interlocking_depth\"is bigger then \"mmu_segmented_region_max_width\". Zero disables this feature." -msgstr "" - -msgid "Use beam interlocking" -msgstr "" - -msgid "Generate interlocking beam structure at the locations where different filaments touch. This improves the adhesion between filaments, especially models printed in different materials." -msgstr "" - -msgid "Interlocking beam width" -msgstr "" - -msgid "The width of the interlocking structure beams." -msgstr "" - -msgid "Interlocking direction" -msgstr "" - -msgid "Orientation of interlock beams." -msgstr "" - -msgid "Interlocking beam layers" -msgstr "" - -msgid "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects." -msgstr "" - -msgid "Interlocking depth" -msgstr "" - -msgid "The distance from the boundary between filaments to generate interlocking structure, measured in cells. Too few cells will result in poor adhesion." -msgstr "" - -msgid "Interlocking boundary avoidance" -msgstr "" - -msgid "The distance from the outside of a model where interlocking structures will not be generated, measured in cells." -msgstr "" - -msgid "Ironing Type" -msgstr "熨燙類型" - -msgid "Ironing is using small flow to print on same height of surface again to make flat surface more smooth. This setting controls which layer being ironed" -msgstr "熨燙是指使用小流量在表面相同高度再次列印，以使平面更加光滑。此設定控制哪些層進行熨燙" - -msgid "No ironing" -msgstr "不熨燙" - -msgid "Top surfaces" -msgstr "頂面" - -msgid "Topmost surface" -msgstr "最頂面" - -msgid "All solid layer" -msgstr "所有實心層" - -msgid "Ironing Pattern" -msgstr "熨燙模式" - -msgid "The pattern that will be used when ironing" -msgstr "熨燙時將使用的圖案" - -msgid "Ironing flow" -msgstr "熨燙流量" - -msgid "The amount of material to extrude during ironing. Relative to flow of normal layer height. Too high value results in overextrusion on the surface" -msgstr "熨燙時相對正常層高流量的材料量。過高的數值將會導致表面材料過擠出。" - -msgid "Ironing line spacing" -msgstr "熨燙間距" - -msgid "The distance between the lines of ironing" -msgstr "熨燙走線的間距" - -msgid "Ironing speed" -msgstr "熨燙速度" - -msgid "Print speed of ironing lines" -msgstr "熨燙的列印速度" - -msgid "Ironing angle" -msgstr "熨燙角度" - -msgid "The angle ironing is done at. A negative number disables this function and uses the default method." -msgstr "" - -msgid "This gcode part is inserted at every layer change after lift z" -msgstr "在每次換層抬升Z高度之後插入這段 G-code。" - -msgid "Supports silent mode" -msgstr "支援靜音模式" - -msgid "Whether the machine supports silent mode in which machine use lower acceleration to print" -msgstr "設備是否支援使用低加速度列印的靜音模式。" - -msgid "Emit limits to G-code" -msgstr "" - -msgid "Machine limits" -msgstr "設備限制" - -msgid "If enabled, the machine limits will be emitted to G-code file.\n" -"This option will be ignored if the g-code flavor is set to Klipper." -msgstr "" - -msgid "This G-code will be used as a code for the pause print. User can insert pause G-code in gcode viewer" -msgstr "該 G-code 用於暫停列印。你可以在 gcode 預覽中插入暫停 G-code" - -msgid "This G-code will be used as a custom code" -msgstr "該 G-code 是訂製化指令" - -msgid "Small area flow compensation (beta)" -msgstr "" - -msgid "Enable flow compensation for small infill areas" -msgstr "" - -msgid "Flow Compensation Model" -msgstr "" - -msgid "Flow Compensation Model, used to adjust the flow for small infill areas. The model is expressed as a comma separated pair of values for extrusion length and flow correction factors, one per line, in the following format: \"1.234,5.678\"" -msgstr "" - -msgid "Maximum speed X" -msgstr "X最大速度" - -msgid "Maximum speed Y" -msgstr "Y最大速度" - -msgid "Maximum speed Z" -msgstr "Z最大速度" - -msgid "Maximum speed E" -msgstr "E最大速度" - -msgid "Maximum X speed" -msgstr "X最大速度" - -msgid "Maximum Y speed" -msgstr "Y最大速度" - -msgid "Maximum Z speed" -msgstr "Z最大速度" - -msgid "Maximum E speed" -msgstr "E最大速度" - -msgid "Maximum acceleration X" -msgstr "X最大加速度" - -msgid "Maximum acceleration Y" -msgstr "Y最大加速度" - -msgid "Maximum acceleration Z" -msgstr "Z最大加速度" - -msgid "Maximum acceleration E" -msgstr "E最大加速度" - -msgid "Maximum acceleration of the X axis" -msgstr "X軸的最大加速度" - -msgid "Maximum acceleration of the Y axis" -msgstr "Y軸的最大加速度" - -msgid "Maximum acceleration of the Z axis" -msgstr "Z軸的最大加速度" - -msgid "Maximum acceleration of the E axis" -msgstr "E軸的最大加速度" - -msgid "Maximum jerk X" -msgstr "X最大抖動" - -msgid "Maximum jerk Y" -msgstr "Y最大抖動" - -msgid "Maximum jerk Z" -msgstr "Z最大抖動" - -msgid "Maximum jerk E" -msgstr "E最大抖動" - -msgid "Maximum jerk of the X axis" -msgstr "X軸最大抖動" - -msgid "Maximum jerk of the Y axis" -msgstr "Y軸最大抖動" - -msgid "Maximum jerk of the Z axis" -msgstr "Z軸最大抖動" - -msgid "Maximum jerk of the E axis" -msgstr "E軸最大抖動" - -msgid "Minimum speed for extruding" -msgstr "最小擠出速度" - -msgid "Minimum speed for extruding (M205 S)" -msgstr "最小擠出速度（M205 S）" - -msgid "Minimum travel speed" -msgstr "最小空駛速度" - -msgid "Minimum travel speed (M205 T)" -msgstr "最小空駛速度（M205 T）" - -msgid "Maximum acceleration for extruding" -msgstr "擠出最大加速度" - -msgid "Maximum acceleration for extruding (M204 P)" -msgstr "擠出時的最大加速度（M204 P）" - -msgid "Maximum acceleration for retracting" -msgstr "回抽最大加速度" - -msgid "Maximum acceleration for retracting (M204 R)" -msgstr "回抽最大加速度（M204 R）" - -msgid "Maximum acceleration for travel" -msgstr "空駛最大加速度" - -msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2" -msgstr "最大行駛加速度（M204 T），僅適用於 Marlin 2" - -msgid "Part cooling fan speed may be increased when auto cooling is enabled. This is the maximum speed limitation of part cooling fan" -msgstr "啟用自動冷卻時，可能會提高物件冷卻風扇的轉速。這是物件冷卻風扇的最大速度限制" - -msgid "Max" -msgstr "最大" - -msgid "The largest printable layer height for extruder. Used tp limits the maximum layer hight when enable adaptive layer height" -msgstr "擠出頭最大可列印的層高。用於限制開啟自適應層高時的最大層高。" - -msgid "Extrusion rate smoothing" -msgstr "平滑擠出率" - -msgid "This parameter smooths out sudden extrusion rate changes that happen when the printer transitions from printing a high flow (high speed/larger width) extrusion to a lower flow (lower speed/smaller width) extrusion and vice versa.\n" -"\n" -"It defines the maximum rate by which the extruded volumetric flow in mm3/sec can change over time. Higher values mean higher extrusion rate changes are allowed, resulting in faster speed transitions.\n" -"\n" -"A value of 0 disables the feature. \n" -"\n" -"For a high speed, high flow direct drive printer (like the Bambu lab or Voron) this value is usually not needed. However it can provide some marginal benefit in certain cases where feature speeds vary greatly. For example, when there are aggressive slowdowns due to overhangs. In these cases a high value of around 300-350mm3/s2 is recommended as this allows for just enough smoothing to assist pressure advance achieve a smoother flow transition.\n" -"\n" -"For slower printers without pressure advance, the value should be set much lower. A value of 10-15mm3/s2 is a good starting point for direct drive extruders and 5-10mm3/s2 for Bowden style. \n" -"\n" -"This feature is known as Pressure Equalizer in Prusa slicer.\n" -"\n" -"Note: this parameter disables arc fitting." -msgstr "" - -msgid "mm³/s²" -msgstr "mm³/s²" - -msgid "Smoothing segment length" -msgstr "平滑段長度" - -msgid "A lower value results in smoother extrusion rate transitions. However, this results in a significantly larger gcode file and more instructions for the printer to process. \n" -"\n" -"Default value of 3 works well for most cases. If your printer is stuttering, increase this value to reduce the number of adjustments made\n" -"\n" -"Allowed values: 1-5" -msgstr "" - -msgid "Minimum speed for part cooling fan" -msgstr "物件冷卻風扇的最小轉速" - -msgid "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed during printing except the first several layers which is defined by no cooling layers.\n" -"Please enable auxiliary_fan in printer settings to use this feature. G-code command: M106 P2 S(0-255)" -msgstr "輔助冷卻風扇的轉速。 列印期間，輔助風扇將以該速度運行，除了設定無須冷卻的前幾層除外\n" -"請在列印設備設定中啟用輔助風扇才能使用此功能。 G碼指令：M106 P2 S（0-255）" - -msgid "Min" -msgstr "最小" - -msgid "The lowest printable layer height for extruder. Used tp limits the minimum layer hight when enable adaptive layer height" -msgstr "擠出頭最小可列印的層高。用於限制開啟自適應層高時的最小層高。" - -msgid "Min print speed" -msgstr "最小列印速度" - -msgid "The minimum printing speed that the printer will slow down to to attempt to maintain the minimum layer time above, when slow down for better layer cooling is enabled." -msgstr "" - -msgid "Diameter of nozzle" -msgstr "噴嘴直徑" - -msgid "Configuration notes" -msgstr "設定備註" - -msgid "You can put here your personal notes. This text will be added to the G-code header comments." -msgstr "你可以在這裡放置你的個人備註。 該文字將會加入 G 代碼標題註釋中。" - -msgid "Host Type" -msgstr "主機類型" - -msgid "Orca Slicer can upload G-code files to a printer host. This field must contain the kind of the host." -msgstr "Orca Slicer可以將 G-code 檔案上傳到列印設備。此欄位必須包含設備類型。" - -msgid "Nozzle volume" -msgstr "噴嘴內腔體積" - -msgid "Volume of nozzle between the cutter and the end of nozzle" -msgstr "噴嘴內從刀具到末端之間的體積。" - -msgid "Cooling tube position" -msgstr "喉管位置" - -msgid "Distance of the center-point of the cooling tube from the extruder tip." -msgstr "喉管的中心點與擠出機齒尖的距離。" - -msgid "Cooling tube length" -msgstr "喉管長度" - -msgid "Length of the cooling tube to limit space for cooling moves inside it." -msgstr "喉管的長度，用於限制冷卻內部移動的空間。" - -msgid "High extruder current on filament swap" -msgstr "更換線材擠出機大電流" - -msgid "It may be beneficial to increase the extruder motor current during the filament exchange sequence to allow for rapid ramming feed rates and to overcome resistance when loading a filament with an ugly shaped tip." -msgstr "可能有益於更換線材過程中增加擠出機電流，克服進料時的阻力以加快尖端成型進料速率而避免產生難看形狀的尖端。" - -msgid "Filament parking position" -msgstr "線材停放位置" - -msgid "Distance of the extruder tip from the position where the filament is parked when unloaded. This should match the value in printer firmware." -msgstr "退料時，擠出機齒尖與線材停放位置的距離。這應該與列印設備韌體中的值相符合。" - -msgid "Extra loading distance" -msgstr "額外進料距離" - -msgid "When set to zero, the distance the filament is moved from parking position during load is exactly the same as it was moved back during unload. When positive, it is loaded further, if negative, the loading move is shorter than unloading." -msgstr "當設定為零時，線材的進料移動與退料移動的距離相同。如果為正，進料比退料長。如果為負，進料比退料短。" - -msgid "Start end points" -msgstr "起始終止點" - -msgid "The start and end points which is from cutter area to garbage can." -msgstr "從切割區域到垃圾桶的起始和結束點。" - -msgid "Reduce infill retraction" -msgstr "減小填充回抽" - -msgid "Don't retract when the travel is in infill area absolutely. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generating slower" -msgstr "當空駛完全在填充區域內時不觸發回抽。這意味著即使漏料也是不可見的。對於複雜模型，該設定能夠減少回抽次數以及列印時長，但是會造成 G-code 產生變慢" - -msgid "This option will drop the temperature of the inactive extruders to prevent oozing." -msgstr "" - -msgid "Filename format" -msgstr "檔案名稱格式" - -msgid "User can self-define the project file name when export" -msgstr "使用者可以自訂匯出項目檔案的名稱。" - -msgid "Make overhangs printable" -msgstr "修改懸空成可列印" - -msgid "Modify the geometry to print overhangs without support material." -msgstr "修改幾何形狀使得懸空部分無需支撐材料或者橋接列印。" - -msgid "Make overhangs printable - Maximum angle" -msgstr "懸空可列印修改的最大角度" - -msgid "Maximum angle of overhangs to allow after making more steep overhangs printable.90° will not change the model at all and allow any overhang, while 0 will replace all overhangs with conical material." -msgstr "開啟使懸空可列印後，允許的懸空最大角度。90° 將完全不改變模型並允許任何懸空，而0° 將用圓錐形材料替換所有懸空部分。" - -msgid "Make overhangs printable - Hole area" -msgstr "最大孔洞面積" - -msgid "Maximum area of a hole in the base of the model before it's filled by conical material.A value of 0 will fill all the holes in the model base." -msgstr "模型底部的孔洞在被圓錐形材料填充前所允許的最大面積。值為 0 將填充模型底部的所有孔洞。" - -msgid "mm²" -msgstr "mm²" - -msgid "Detect overhang wall" -msgstr "識別懸空外牆" - -#, c-format, boost-format -msgid "Detect the overhang percentage relative to line width and use different speed to print. For 100%% overhang, bridge speed is used." -msgstr "偵測懸空相對於線寬的百分比，並應用不同的速度列印。100%% 的懸空將使用橋接速度。" - -msgid "Filament to print walls" -msgstr "" - -msgid "Line width of inner wall. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "內牆的線寬。如果以 % 表示，它將以噴嘴直徑為基準來計算。" - -msgid "Speed of inner wall" -msgstr "內圈牆列印速度" - -msgid "Number of walls of every layer" -msgstr "每一層的外牆" - -msgid "Alternate extra wall" -msgstr "交錯額外牆壁" - -msgid "This setting adds an extra wall to every other layer. This way the infill gets wedged vertically between the walls, resulting in stronger prints. \n" -"\n" -"When this option is enabled, the ensure vertical shell thickness option needs to be disabled. \n" -"\n" -"Using lightning infill together with this option is not recommended as there is limited infill to anchor the extra perimeters to." -msgstr "" - -msgid "If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed the absolute path to the G-code file as the first argument, and they can access the Orca Slicer config settings by reading environment variables." -msgstr "如果你想透過自訂腳本處理輸出的 G-code，只需在此處列出它們的絕對路徑即可。 用分號分隔多個腳本。 腳本將傳遞 G-code 檔案的絕對路徑作為第一個參數，並且它們可以透過讀取環境變數來讀取 Orca Slicer 設定。" - -msgid "Printer type" -msgstr "" - -msgid "Type of the printer" -msgstr "" - -msgid "Printer notes" -msgstr "列印設備備註" - -msgid "You can put your notes regarding the printer here." -msgstr "可以將列印設備的備註填寫在此處" - -msgid "Printer variant" -msgstr "" - -msgid "Raft contact Z distance" -msgstr "筏層Z間距" - -msgid "Z gap between object and raft. Ignored for soluble interface" -msgstr "模型和筏層之間的Z間隙" - -msgid "Raft expansion" -msgstr "筏層擴展" - -msgid "Expand all raft layers in XY plane" -msgstr "在 XY 平面擴展所有筏層" - -msgid "Initial layer density" -msgstr "首層密度" - -msgid "Density of the first raft or support layer" -msgstr "筏和支撐的首層密度" - -msgid "Initial layer expansion" -msgstr "首層擴展" - -msgid "Expand the first raft or support layer to improve bed plate adhesion" -msgstr "擴展筏和支撐的首層可以改善和熱床的黏附。" - -msgid "Raft layers" -msgstr "筏層" - -msgid "Object will be raised by this number of support layers. Use this function to avoid wrapping when print ABS" -msgstr "模型會在相應層數的支撐上抬高進行列印。使用該功能通常用於列印 ABS 時翹曲。" - -msgid "G-code path is generated after simplifying the contour of model to avoid too much points and gcode lines in gcode file. Smaller value means higher resolution and more time to slice" -msgstr "為了避免 G-code 檔案中過密集的點和走線，G-code走線通常是在簡化模型的外輪廓之後產生。越小的數值代表更高的解析度，同時需要更長的切片時間。" - -msgid "Travel distance threshold" -msgstr "空駛距離臨界值" - -msgid "Only trigger retraction when the travel distance is longer than this threshold" -msgstr "只在空駛距離大於該數值時觸發回抽。" - -msgid "Retract amount before wipe" -msgstr "擦拭前的回抽量" - -msgid "The length of fast retraction before wipe, relative to retraction length" -msgstr "擦拭之前的回抽長度，用總回抽長度的百分比表示。" - -msgid "Retract when change layer" -msgstr "換層時回抽" - -msgid "Force a retraction when changes layer" -msgstr "強制在換層時回抽。" - -msgid "Retract on top layer" -msgstr "" - -msgid "Force a retraction on top layer. Disabling could prevent clog on very slow patterns with small movements, like Hilbert curve" -msgstr "" - -msgid "Retraction Length" -msgstr "回抽長度" - -msgid "Some amount of material in extruder is pulled back to avoid ooze during long travel. Set zero to disable retraction" -msgstr "擠出機將材料拉回指定長度，避免空駛較長時軟化的線材滲出。設定為 0 表示關閉回抽。" - -msgid "Long retraction when cut(experimental)" -msgstr "" - -msgid "Experimental feature.Retracting and cutting off the filament at a longer distance during changes to minimize purge.While this reduces flush significantly, it may also raise the risk of nozzle clogs or other printing problems." -msgstr "" - -msgid "Retraction distance when cut" -msgstr "" - -msgid "Experimental feature.Retraction length before cutting off during filament change" -msgstr "" - -msgid "Z-hop height" -msgstr "" - -msgid "Whenever the retraction is done, the nozzle is lifted a little to create clearance between nozzle and the print. It prevents nozzle from hitting the print when travel move. Using spiral line to lift z can prevent stringing" -msgstr "回抽完成之後，噴嘴輕微抬升，和列印物件之間產生一定間隙。這能夠避免空駛時噴嘴和列印物件剮蹭和碰撞。使用螺旋線抬升z能夠減少拉絲。" - -msgid "Z hop lower boundary" -msgstr "" - -msgid "Z hop will only come into effect when Z is above this value and is below the parameter: \"Z hop upper boundary\"" -msgstr "" - -msgid "Z hop upper boundary" -msgstr "" - -msgid "If this value is positive, Z hop will only come into effect when Z is above the parameter: \"Z hop lower boundary\" and is below this value" -msgstr "" - -msgid "Z-hop type" -msgstr "" - -msgid "Z hop type" -msgstr "抬Z類型" - -msgid "Slope" -msgstr "梯形" - -msgid "Spiral" -msgstr "螺旋" - -msgid "Traveling angle" -msgstr "" - -msgid "Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results in Normal Lift" -msgstr "" - -msgid "Only lift Z above" -msgstr "僅在高度以上抬Z" - -msgid "If you set this to a positive value, Z lift will only take place above the specified absolute Z." -msgstr "如果設定為正值，則 Z 抬升僅在指定的絕對 Z 之上發生" - -msgid "Only lift Z below" -msgstr "僅在高度以下抬Z" - -msgid "If you set this to a positive value, Z lift will only take place below the specified absolute Z." -msgstr "如果設定為正值，則 Z 抬升僅在指定的絕對 Z 以下發生。" - -msgid "On surfaces" -msgstr "僅表面抬Z" - -msgid "Enforce Z Hop behavior. This setting is impacted by the above settings (Only lift Z above/below)." -msgstr "強制 Z 抬升行為。此設定受上述設定的影響（僅在高度以下抬Z/僅在高度以上抬Z）。" - -msgid "All Surfaces" -msgstr "所有表面" - -msgid "Top Only" -msgstr "僅頂面" - -msgid "Bottom Only" -msgstr "僅底面" - -msgid "Top and Bottom" -msgstr "頂面和地面" - -msgid "Extra length on restart" -msgstr "額外回填長度" - -msgid "When the retraction is compensated after the travel move, the extruder will push this additional amount of filament. This setting is rarely needed." -msgstr "每當空駛後回抽被補償時，擠出機將推入額外長度的線材。很少需要此設定。" - -msgid "When the retraction is compensated after changing tool, the extruder will push this additional amount of filament." -msgstr "當換色後回抽被補償時，擠出機將推入額外長度的線材。" - -msgid "Retraction Speed" -msgstr "回抽速度" - -msgid "Speed of retractions" -msgstr "回抽速度" - -msgid "De-retraction Speed" -msgstr "裝填速度" - -msgid "Speed for reloading filament into extruder. Zero means same speed with retraction" -msgstr "線材裝填的速度，0 表示和回抽速度一致。" - -msgid "Use firmware retraction" -msgstr "使用韌體回抽" - -msgid "This experimental setting uses G10 and G11 commands to have the firmware handle the retraction. This is only supported in recent Marlin." -msgstr "（實驗設定）使用 G10 和 G11 命令讓韌體處理回抽。該功能僅支持最近版本的 Marlin 固件。" - -msgid "Show auto-calibration marks" -msgstr "顯示雷達校準線" - -msgid "Disable set remaining print time" -msgstr "" - -msgid "Disable generating of the M73: Set remaining print time in the final gcode" -msgstr "" - -msgid "Seam position" -msgstr "接縫位置" - -msgid "The start position to print each part of outer wall" -msgstr "Z縫(外牆銜接)的位置" - -msgid "Nearest" -msgstr "最近" - -msgid "Aligned" -msgstr "對齊" - -msgid "Back" -msgstr "背面" - -msgid "Random" -msgstr "隨機" - -msgid "Staggered inner seams" -msgstr "交錯的內牆接縫" - -msgid "This option causes the inner seams to be shifted backwards based on their depth, forming a zigzag pattern." -msgstr "此選項會根據內牆深度使接縫向後移動，形成鋸齒形模式。" - -msgid "Seam gap" -msgstr "接縫間隔" - -msgid "In order to reduce the visibility of the seam in a closed loop extrusion, the loop is interrupted and shortened by a specified amount.\n" -"This amount can be specified in millimeters or as a percentage of the current extruder diameter. The default value for this parameter is 10%." -msgstr "" - -msgid "Scarf joint seam (beta)" -msgstr "" - -msgid "Use scarf joint to minimize seam visibility and increase seam strength." -msgstr "" - -msgid "Conditional scarf joint" -msgstr "" - -msgid "Apply scarf joints only to smooth perimeters where traditional seams do not conceal the seams at sharp corners effectively." -msgstr "" - -msgid "Conditional angle threshold" -msgstr "" - -msgid "This option sets the threshold angle for applying a conditional scarf joint seam.\n" -"If the maximum angle within the perimeter loop exceeds this value (indicating the absence of sharp corners), a scarf joint seam will be used. The default value is 155°." -msgstr "" - -msgid "Conditional overhang threshold" -msgstr "" - -#, no-c-format, no-boost-format -msgid "This option determines the overhang threshold for the application of scarf joint seams. If the unsupported portion of the perimeter is less than this threshold, scarf joint seams will be applied. The default threshold is set at 40% of the external wall's width. Due to performance considerations, the degree of overhang is estimated." -msgstr "" - -msgid "Scarf joint speed" -msgstr "" - -msgid "This option sets the printing speed for scarf joints. It is recommended to print scarf joints at a slow speed (less than 100 mm/s). It's also advisable to enable 'Extrusion rate smoothing' if the set speed varies significantly from the speed of the outer or inner walls. If the speed specified here is higher than the speed of the outer or inner walls, the printer will default to the slower of the two speeds. When specified as a percentage (e.g., 80%), the speed is calculated based on the respective outer or inner wall speed. The default value is set to 100%." -msgstr "" - -msgid "Scarf joint flow ratio" -msgstr "" - -msgid "This factor affects the amount of material for scarf joints." -msgstr "" - -msgid "Scarf start height" -msgstr "" - -msgid "Start height of the scarf.\n" -"This amount can be specified in millimeters or as a percentage of the current layer height. The default value for this parameter is 0." -msgstr "" - -msgid "Scarf around entire wall" -msgstr "" - -msgid "The scarf extends to the entire length of the wall." -msgstr "" - -msgid "Scarf length" -msgstr "" - -msgid "Length of the scarf. Setting this parameter to zero effectively disables the scarf." -msgstr "" - -msgid "Scarf steps" -msgstr "" - -msgid "Minimum number of segments of each scarf." -msgstr "" - -msgid "Scarf joint for inner walls" -msgstr "" - -msgid "Use scarf joint for inner walls as well." -msgstr "" - -msgid "Role base wipe speed" -msgstr "自動擦拭速度" - -msgid "The wipe speed is determined by the speed of the current extrusion role.e.g. if a wipe action is executed immediately following an outer wall extrusion, the speed of the outer wall extrusion will be utilized for the wipe action." -msgstr "" - -msgid "Wipe on loops" -msgstr "閉環擦拭" - -msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." -msgstr "為了最大限度地減少閉環擠出中接縫的可見性，在擠出機離開環之前，會向內執行一個小小的移動。" - -msgid "Wipe before external loop" -msgstr "" - -msgid "To minimize visibility of potential overextrusion at the start of an external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall print order, the de-retraction is performed slightly on the inside from the start of the external perimeter. That way any potential over extrusion is hidden from the outside surface. \n" -"\n" -"This is useful when printing with Outer/Inner or Inner/Outer/Inner wall print order as in these modes it is more likely an external perimeter is printed immediately after a de-retraction move." -msgstr "" - -msgid "Wipe speed" -msgstr "擦拭速度" - -msgid "The wipe speed is determined by the speed setting specified in this configuration.If the value is expressed as a percentage (e.g. 80%), it will be calculated based on the travel speed setting above.The default value for this parameter is 80%" -msgstr "擦拭速度是根據此配置中指定的速度設定。如果該值以百分比形式表示（例如 80%），則將根據空駛速度設定進行計算。該參數的預設值為 80%。" - -msgid "Skirt distance" -msgstr "Skirt距離" - -msgid "Distance from skirt to brim or object" -msgstr "從 skirt 到模型或者 brim（裙邊）的距離" - -msgid "Skirt start point" -msgstr "" - -msgid "Angle from the object center to skirt start point. Zero is the most right position, counter clockwise is positive angle." -msgstr "" - -msgid "Skirt height" -msgstr "Skirt 高度" - -msgid "How many layers of skirt. Usually only one layer" -msgstr "skirt 有多少層。通常只有一層" - -msgid "Draft shield" -msgstr "防風罩" - -msgid "A draft shield is useful to protect an ABS or ASA print from warping and detaching from print bed due to wind draft. It is usually needed only with open frame printers, i.e. without an enclosure. \n" -"\n" -"Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt height' is used.\n" -"Note: With the draft shield active, the skirt will be printed at skirt distance from the object. Therefore, if brims are active it may intersect with them. To avoid this, increase the skirt distance value.\n" -msgstr "" - -msgid "Disabled" -msgstr "停用" - -msgid "Enabled" -msgstr "啟用" - -msgid "Skirt type" -msgstr "" - -msgid "Combined - single skirt for all objects, Per object - individual object skirt." -msgstr "" - -msgid "Combined" -msgstr "" - -msgid "Per object" -msgstr "" - -msgid "Skirt loops" -msgstr "Skirt 圈數" - -msgid "Number of loops for the skirt. Zero means disabling skirt" -msgstr "skirt 的圈數。0 表示關閉 skirt。" - -msgid "Skirt speed" -msgstr "Skirt 速度" - -msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." -msgstr "Skirt 速度，單位為 mm/秒。 0 表示使用預設層擠出速度。" - -msgid "Skirt minimum extrusion length" -msgstr "" - -msgid "Minimum filament extrusion length in mm when printing the skirt. Zero means this feature is disabled.\n" -"\n" -"Using a non zero value is useful if the printer is set up to print without a prime line.\n" -"Final number of loops is not taling into account whli arranging or validating objects distance. Increase loop number in such case. " -msgstr "" - -msgid "The printing speed in exported gcode will be slowed down, when the estimated layer time is shorter than this value, to get better cooling for these layers" -msgstr "當層預估列印時間小於這個數值時，列印速度將會降低，從而獲得更好的冷卻效果。" - -msgid "Minimum sparse infill threshold" -msgstr "稀疏填充最小臨界值" - -msgid "Sparse infill area which is smaller than threshold value is replaced by internal solid infill" -msgstr "小於這個臨界值的稀疏填充區域將會被內部實心填充替代。" - -msgid "Solid infill" -msgstr "" - -msgid "Filament to print solid infill" -msgstr "" - -msgid "Line width of internal solid infill. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "內部實心填充的線寬。如果以%表示，它將以噴嘴直徑為基準來計算。" - -msgid "Speed of internal solid infill, not the top and bottom surface" -msgstr "內部實心填充的速度，不是頂面和底面。" - -msgid "Spiralize smooths out the z moves of the outer contour. And turns a solid model into a single walled print with solid bottom layers. The final generated model has no seam" -msgstr "沿著物件的外輪廓螺旋上升，將實體模型轉變為只有底面實心層和側面單層牆壁的列印。最後產生的列印物件沒有接縫。" - -msgid "Smooth Spiral" -msgstr "" - -msgid "Smooth Spiral smooths out X and Y moves as well, resulting in no visible seam at all, even in the XY directions on walls that are not vertical" -msgstr "" - -msgid "Max XY Smoothing" -msgstr "" - -msgid "Maximum distance to move points in XY to try to achieve a smooth spiralIf expressed as a %, it will be computed over nozzle diameter" -msgstr "" - -msgid "If smooth or traditional mode is selected, a timelapse video will be generated for each print. After each layer is printed, a snapshot is taken with the chamber camera. All of these snapshots are composed into a timelapse video when printing completes. If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot. Since the melt filament may leak from the nozzle during the process of taking a snapshot, prime tower is required for smooth mode to wipe nozzle." -msgstr "如果啟用平滑模式或者傳統模式，將在每次列印時產生縮時錄影影片。列印完每層後，將用內建相機拍攝快照。列印完成後，所有這些快照會組合成一個延時影片。如果啟用平滑模式，列印完每層後，工具頭將移動到吐料槽，然後拍攝快照。由於平滑模式在拍攝快照的過程中熔融的線材可能會從噴嘴中洩漏，因此需要使用換料塔進行噴嘴擦拭。" - -msgid "Traditional" -msgstr "傳統模式" - -msgid "Temperature variation" -msgstr "軟化溫度" - -#. TRN PrintSettings : "Ooze prevention" > "Temperature variation" -msgid "Temperature difference to be applied when an extruder is not active. The value is not used when 'idle_temperature' in filament settings is set to non zero value." -msgstr "" - -msgid "Preheat time" -msgstr "" - -msgid "To reduce the waiting time after tool change, Orca can preheat the next tool while the current tool is still in use. This setting specifies the time in seconds to preheat the next tool. Orca will insert a M104 command to preheat the tool in advance." -msgstr "" - -msgid "Preheat steps" -msgstr "" - -msgid "Insert multiple preheat commands(e.g. M104.1). Only useful for Prusa XL. For other printers, please set it to 1." -msgstr "" - -msgid "Start G-code" -msgstr "起始 G-code" - -msgid "Start G-code when start the whole printing" -msgstr "整個列印開始前的起始 G-code" - -msgid "Start G-code when start the printing of this filament" -msgstr "開始使用這個線材列印的起始 G-code" - -msgid "Single Extruder Multi Material" -msgstr "單擠出機多線材" - -msgid "Use single nozzle to print multi filament" -msgstr "使用單噴嘴列印多線材" - -msgid "Manual Filament Change" -msgstr "手動更換線材" - -msgid "Enable this option to omit the custom Change filament G-code only at the beginning of the print. The tool change command (e.g., T0) will be skipped throughout the entire print. This is useful for manual multi-material printing, where we use M600/PAUSE to trigger the manual filament change action." -msgstr "" - -msgid "Purge in prime tower" -msgstr "沖刷進換料塔" - -msgid "Purge remaining filament into prime tower" -msgstr "沖刷剩餘的線材進入換料塔" - -msgid "Enable filament ramming" -msgstr "啟用線材尖端成型" - -msgid "No sparse layers (beta)" -msgstr "" - -msgid "If enabled, the wipe tower will not be printed on layers with no toolchanges. On layers with a toolchange, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "如果啟用，將不會在沒有換色的層列印換料塔。存在換色的層時，擠出機將降低高度打印換料塔。使用者應該確保不會與列印物件發生衝突。" - -msgid "Prime all printing extruders" -msgstr "所有擠出機畫線" - -msgid "If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print." -msgstr "如果啟用，所有擠出機將在列印開始時在列印板前方畫線" - -msgid "Slice gap closing radius" -msgstr "切片間隙閉合半徑" - -msgid "Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low." -msgstr "在三角形網格切片過程中，小於2倍間隙閉合半徑的裂紋將被填充。間隙閉合操作可能會降低最終列印解析度，因此建議降值保持在合理的較低水準" - -msgid "Slicing Mode" -msgstr "切片模式" - -msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." -msgstr "對 3DLabPrint 的飛機模型使用 \"奇偶\"。使用 \"閉孔 \"來關閉模型上的所有孔。" - -msgid "Regular" -msgstr "常規" - -msgid "Even-odd" -msgstr "奇偶" - -msgid "Close holes" -msgstr "閉孔" - -msgid "Z offset" -msgstr "Z 偏移（Z offset）" - -msgid "This value will be added (or subtracted) from all the Z coordinates in the output G-code. It is used to compensate for bad Z endstop position: for example, if your endstop zero actually leaves the nozzle 0.3mm far from the print bed, set this to -0.3 (or fix your endstop)." -msgstr "" - -msgid "Enable support" -msgstr "開啟支撐" - -msgid "Enable support generation." -msgstr "開啟支撐產生。" - -msgid "normal(auto) and tree(auto)is used to generate support automatically. If normal(manual)or tree(manual)is selected, only support enforcers are generated" -msgstr "" - -msgid "normal(auto)" -msgstr "普通（自動）" - -msgid "tree(auto)" -msgstr "樹狀（自動）" - -msgid "normal(manual)" -msgstr "普通（手動）" - -msgid "tree(manual)" -msgstr "樹狀（手動）" - -msgid "Support/object xy distance" -msgstr "支撐/模型 xy 間距" - -msgid "XY separation between an object and its support" -msgstr "模型和支撐之間 XY 分離距離" - -msgid "Pattern angle" -msgstr "模式角度" - -msgid "Use this setting to rotate the support pattern on the horizontal plane." -msgstr "設定支撐圖形在水平面的旋轉角度。" - -msgid "On build plate only" -msgstr "僅在列印板產生" - -msgid "Don't create support on model surface, only on build plate" -msgstr "不在模型表面上產生支撐，只在列印板上產生。" - -msgid "Support critical regions only" -msgstr "僅支撐關鍵區域" - -msgid "Only create support for critical regions including sharp tail, cantilever, etc." -msgstr "僅對關鍵區域產生支撐，包括尖尾、懸臂等。" - -msgid "Remove small overhangs" -msgstr "移除小懸空" - -msgid "Remove small overhangs that possibly need no supports." -msgstr "移除可能並不需要支撐的小懸空。" - -msgid "Top Z distance" -msgstr "頂部Z距離" - -msgid "The z gap between the top support interface and object" -msgstr "支撐頂部和模型之間的z間隙" - -msgid "Bottom Z distance" -msgstr "底部Z距離" - -msgid "The z gap between the bottom support interface and object" -msgstr "支撐產生於模型表面時，支撐面底部和模型之間的z間隙" - -msgid "Support/raft base" -msgstr "支撐/筏層主體" - -msgid "Filament to print support base and raft. \"Default\" means no specific filament for support and current filament is used" -msgstr "列印支撐主體和筏層的線材。\"預設\"代表不指定特定的線材，並使用目前線材" - -msgid "Avoid interface filament for base" -msgstr "避免介面線材用於底座" - -msgid "Avoid using support interface filament to print support base if possible." -msgstr "如果可能，避免使用支援介面線材來列印支援底座。" - -msgid "Line width of support. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "支撐的線寬。如果以 % 表示，它將以噴嘴直徑為基準來計算。" - -msgid "Interface use loop pattern" -msgstr "接觸面採用圈形走線。" - -msgid "Cover the top contact layer of the supports with loops. Disabled by default." -msgstr "使用圈形走線覆蓋頂部接觸面。預設關閉。" - -msgid "Support/raft interface" -msgstr "支撐/筏層界面" - -msgid "Filament to print support interface. \"Default\" means no specific filament for support interface and current filament is used" -msgstr "列印支撐界面的線材。\"預設\"代表不指定特定的線材，並使用目前線材" - -msgid "Top interface layers" -msgstr "頂部接觸面層數" - -msgid "Number of top interface layers" -msgstr "頂部接觸面層數" - -msgid "Bottom interface layers" -msgstr "底部接觸面層數" - -msgid "Number of bottom interface layers" -msgstr "底層介面層數" - -msgid "Same as top" -msgstr "與頂部相同" - -msgid "Top interface spacing" -msgstr "頂部接觸面線距" - -msgid "Spacing of interface lines. Zero means solid interface" -msgstr "接觸面的線距。0 代表實心接觸面。" - -msgid "Bottom interface spacing" -msgstr "底部接觸面線距" - -msgid "Spacing of bottom interface lines. Zero means solid interface" -msgstr "底部接觸面走線的線距。0 表示實心接觸面。" - -msgid "Speed of support interface" -msgstr "支撐面速度" - -msgid "Base pattern" -msgstr "支撐主體圖案" - -msgid "Line pattern of support" -msgstr "支撐走線圖案" - -msgid "Rectilinear grid" -msgstr "直線網格" - -msgid "Hollow" -msgstr "空心" - -msgid "Interface pattern" -msgstr "支撐面圖案" - -msgid "Line pattern of support interface. Default pattern for non-soluble support interface is Rectilinear, while default pattern for soluble support interface is Concentric" -msgstr "支撐接觸面的走線圖案。非可溶支撐接觸面的預設圖案為直線，可溶支撐接觸面的預設圖案為同心。" - -msgid "Rectilinear Interlaced" -msgstr "交疊的直線" - -msgid "Base pattern spacing" -msgstr "主體圖案線距" - -msgid "Spacing between support lines" -msgstr "支撐線距" - -msgid "Normal Support expansion" -msgstr "普通支撐延伸" - -msgid "Expand (+) or shrink (-) the horizontal span of normal support" -msgstr "在水平方向對普通支撐進行延伸（+）或收縮（-）" - -msgid "Speed of support" -msgstr "支撐列印速度" - -msgid "Style and shape of the support. For normal support, projecting the supports into a regular grid will create more stable supports (default), while snug support towers will save material and reduce object scarring.\n" -"For tree support, slim and organic style will merge branches more aggressively and save a lot of material (default organic), while hybrid style will create similar structure to normal support under large flat overhangs." -msgstr "支撐的樣式和形狀。 對於普通支撐，將支撐投影到網格中將創建更穩定的支撐（預設），而緊貼的支撐塔將節省材料並減少物體表面的痕跡。\n" -"對於樹狀支撐，細長和有機風格將更積極地合併樹枝並節省大量材料（預設有機），而混合風格將在大平面懸空下建立與正常支撐類似的結構。" - -msgid "Default (Grid/Organic" -msgstr "預設 (格狀/有機" - -msgid "Snug" -msgstr "緊貼" - -msgid "Organic" -msgstr "有機樹" - -msgid "Tree Slim" -msgstr "苗條樹" - -msgid "Tree Strong" -msgstr "粗壯樹" - -msgid "Tree Hybrid" -msgstr "混合樹" - -msgid "Independent support layer height" -msgstr "支撐獨立層高" - -msgid "Support layer uses layer height independent with object layer. This is to support customizing z-gap and save print time.This option will be invalid when the prime tower is enabled." -msgstr "支撐層使用與物件層獨立的層高。這是為了支援自訂Ｚ間隙（z-gap）並且節省列印時間。當換料塔被啟用時，這個選項將無效。" - -msgid "Threshold angle" -msgstr "臨界值角度" - -msgid "Support will be generated for overhangs whose slope angle is below the threshold." -msgstr "將會為懸空角度低於臨界值的模型表面產生支撐。" - -msgid "Tree support branch angle" -msgstr "樹狀支撐分支角度" - -msgid "This setting determines the maximum overhang angle that t he branches of tree support allowed to make.If the angle is increased, the branches can be printed more horizontally, allowing them to reach farther." -msgstr "此設定決定樹狀支撐的最大分支角度。如果角度增加，可以更水平地列印分支，使它們可以到達更遠的地方。" - -msgid "Preferred Branch Angle" -msgstr "偏好樹狀分支角度" - -#. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" -msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "當樹狀分支不必避開模型時的偏好角度。 使用較低的角度使它們更垂直且更穩定。 使用更高的角度使分支合併得更快。" - -msgid "Tree support branch distance" -msgstr "樹狀支撐分支距離" - -msgid "This setting determines the distance between neighboring tree support nodes." -msgstr "此設定確定了樹狀支撐的相鄰節點之間的距離。" - -msgid "Branch Density" -msgstr "樹狀分支密度" - -#. TRN PrintSettings: "Organic supports" > "Branch Density" -msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs but the supports are harder to remove, thus it is recommended to enable top support interfaces instead of a high branch density value if dense interfaces are needed." -msgstr "用於調整產生樹狀支撐結構的密度。 較高的值會產生更好的懸空，但支撐更難移除，因此如果需要密集的支撐，建議啟用頂部支撐而不是高分支密度值。" - -msgid "Adaptive layer height" -msgstr "自適應層高" - -msgid "Enabling this option means the height of tree support layer except the first will be automatically calculated " -msgstr "啟用此選項將自動計算（除第一層外）樹狀支撐的層高。" - -msgid "Auto brim width" -msgstr "自動 brim（裙邊）寬度" - -msgid "Enabling this option means the width of the brim for tree support will be automatically calculated" -msgstr "啟用此選項意味著樹狀支撐的裙邊寬度將自動計算自動計算" - -msgid "Tree support brim width" -msgstr "樹狀支撐brim（裙邊）寬度" - -msgid "Distance from tree branch to the outermost brim line" -msgstr "從樹狀支撐分支到最外層brim（裙邊）線的距離" - -msgid "Tip Diameter" -msgstr "末端直徑" - -#. TRN PrintSettings: "Organic supports" > "Tip Diameter" -msgid "Branch tip diameter for organic supports." -msgstr "有機樹狀支撐的分支末端直徑。" - -msgid "Tree support branch diameter" -msgstr "樹狀支撐分支直徑" - -msgid "This setting determines the initial diameter of support nodes." -msgstr "此設定確定了樹狀支撐節點的初始直徑。" - -#. TRN PrintSettings: #lmFIXME -msgid "Branch Diameter Angle" -msgstr "分支直徑角度" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" -msgid "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the organic support." -msgstr "樹狀分支直徑隨著向底部逐漸變粗的角度。 0 角度將導致分支在其長度上具有均勻的厚度。 一點角度可以增加有機樹支撐的穩定性。" - -msgid "Branch Diameter with double walls" -msgstr "分支雙層牆直徑" - -#. TRN PrintSettings: "Organic supports" > "Branch Diameter" -msgid "Branches with area larger than the area of a circle of this diameter will be printed with double walls for stability. Set this value to zero for no double walls." -msgstr "該數值大於以分支直徑得到的圓形面積時，將列印雙層牆以確保穩定性。 如果不使用雙層牆體，請將此值設為 0。" - -msgid "Support wall loops" -msgstr "支撐牆數" - -msgid "This setting specify the count of walls around support" -msgstr "此設定指定支援結構的牆壁數量" - -msgid "Tree support with infill" -msgstr "樹狀支撐產生填充" - -msgid "This setting specifies whether to add infill inside large hollows of tree support" -msgstr "此設定決定是否為樹狀支撐內部的空間產生填充。" - -msgid "Activate temperature control" -msgstr "啟動溫度控制" - -msgid "Enable this option for automated chamber temperature control. This option activates the emitting of an M191 command before the \"machine_start_gcode\"\n" -" which sets the chamber temperature and waits until it is reached. In addition, it emits an M141 command at the end of the print to turn off the chamber heater, if present. \n" -"\n" -"This option relies on the firmware supporting the M191 and M141 commands either via macros or natively and is usually used when an active chamber heater is installed." -msgstr "此選項啟用機箱溫度控制。此選項會在 \"machine_start_gcode\" 之前啟用 M191 命令，設定機箱溫度並等待達到設定溫度。此外，它會在列印結束時發出 M141 命令來關閉機箱加熱器（如果存在）\n" -"。\n" -"此選項依賴於韌體支援 M191 和 M141 命令（通過巨集或原生），通常用於主動機箱加熱器。" - -msgid "Chamber temperature" -msgstr "機箱溫度" - -msgid "For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength. However, at the same time, a higher chamber temperature will reduce the efficiency of air filtration for ABS and ASA. \n" -"\n" -"For PLA, PETG, TPU, PVA, and other low-temperature materials, this option should be disabled (set to 0) as the chamber temperature should be low to avoid extruder clogging caused by material softening at the heat break.\n" -"\n" -"If enabled, this parameter also sets a gcode variable named chamber_temperature, which can be used to pass the desired chamber temperature to your print start macro, or a heat soak macro like this: PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may be useful if your printer does not support M141/M191 commands, or if you desire to handle heat soaking in the print start macro if no active chamber heater is installed." -msgstr "" - -msgid "Nozzle temperature for layers after the initial one" -msgstr "除首層外的其它層的噴嘴溫度" - -msgid "Detect thin wall" -msgstr "檢查薄壁" - -msgid "Detect thin wall which can't contain two line width. And use single line to print. Maybe printed not very well, because it's not closed loop" -msgstr "檢查無法容納兩條走線的薄壁。使用單條走線列印。可能會打地不是很好，因為走線不再閉合。" - -msgid "This gcode is inserted when change filament, including T command to trigger tool change" -msgstr "換料時插入的G-code，包括T命令。" - -msgid "This gcode is inserted when the extrusion role is changed" -msgstr "" - -msgid "Line width for top surfaces. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "頂面的線寬。如果以%表示，它將以噴嘴直徑為基準來計算。" - -msgid "Speed of top surface infill which is solid" -msgstr "頂面實心填充的速度" - -msgid "Top shell layers" -msgstr "頂部殼體層數" - -msgid "This is the number of solid layers of top shell, including the top surface layer. When the thickness calculated by this value is thinner than top shell thickness, the top shell layers will be increased" -msgstr "頂部殼體實心層層數，包括頂面。當由該層數計算的厚度小於頂部殼體厚度，切片時會增加頂部殼體的層數" - -msgid "Top solid layers" -msgstr "頂部殼體層數" - -msgid "Top shell thickness" -msgstr "頂部殼體厚度" - -msgid "The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is absolutely determined by top shell layers" -msgstr "如果由頂部殼體層數算出的厚度小於這個數值，那麼切片時將自動增加頂部殼體層數。這能夠避免當層高很小時，頂部殼體過薄。0 表示關閉這個設定，同時頂部殼體的厚度完全由頂部殼體層數決定" - -msgid "Speed of travel which is faster and without extrusion" -msgstr "空駛的速度。空駛是無擠出量的快速移動。" - -msgid "Wipe while retracting" -msgstr "回抽時擦拭" - -msgid "Move nozzle along the last extrusion path when retracting to clean leaked material on nozzle. This can minimize blob when print new part after travel" -msgstr "當回抽時，讓噴嘴沿著前面的走線方向繼續移動，清除掉噴嘴上的漏料。這能夠避免空駛結束列印新的區域時產生斑點。" - -msgid "Wipe Distance" -msgstr "擦拭距離" - -msgid "Describe how long the nozzle will move along the last path when retracting. \n" -"\n" -"Depending on how long the wipe operation lasts, how fast and long the extruder/filament retraction settings are, a retraction move may be needed to retract the remaining filament. \n" -"\n" -"Setting a value in the retract amount before wipe setting below will perform any excess retraction before the wipe, else it will be performed after." -msgstr "描述當回抽時噴嘴沿最後一條路徑移動的時間。\n" -"\n" -"根據擦拭操作持續時間、擠出機/線材回抽設定的速度和時間長度，可能需要回抽來抽回剩餘的線材。\n" -"若在下面的擦拭設定之前設定回抽量，將會在擦拭之前執行多餘的回抽，否則將在之後執行。" - -msgid "The wiping tower can be used to clean up the residue on the nozzle and stabilize the chamber pressure inside the nozzle, in order to avoid appearance defects when printing objects." -msgstr "換料塔可以用來清理噴嘴上的殘留料和讓噴嘴內部的壓力達到穩定狀態，以避免列印物體時出現外觀瑕疵。" - -msgid "Purging volumes" -msgstr "沖刷體積" - -msgid "Flush multiplier" -msgstr "沖刷量乘數" - -msgid "The actual flushing volumes is equal to the flush multiplier multiplied by the flushing volumes in the table." -msgstr "實際沖刷量等於沖刷量乘數乘以表格單元中的沖刷量" - -msgid "Prime volume" -msgstr "清理量" - -msgid "The volume of material to prime extruder on tower." -msgstr "換料塔上的清理量" - -msgid "Width of prime tower" -msgstr "換料塔寬度" - -msgid "Wipe tower rotation angle" -msgstr "換料塔旋轉角度" - -msgid "Wipe tower rotation angle with respect to x-axis." -msgstr "換料塔相對於 x 軸的旋轉角度。" - -msgid "Stabilization cone apex angle" -msgstr "穩定錐形頂角" - -msgid "Angle at the apex of the cone that is used to stabilize the wipe tower. Larger angle means wider base." -msgstr "圓錐體頂點處的角度，用於穩定換料塔。 更大的角度意味著更寬的底座。" - -msgid "Maximum wipe tower print speed" -msgstr "換料塔最快列印速度" - -msgid "The maximum print speed when purging in the wipe tower and printing the wipe tower sparse layers. When purging, if the sparse infill speed or calculated speed from the filament max volumetric speed is lower, the lowest will be used instead.\n" -"\n" -"When printing the sparse layers, if the internal perimeter speed or calculated speed from the filament max volumetric speed is lower, the lowest will be used instead.\n" -"\n" -"Increasing this speed may affect the tower's stability as well as increase the force with which the nozzle collides with any blobs that may have formed on the wipe tower.\n" -"\n" -"Before increasing this parameter beyond the default of 90mm/sec, make sure your printer can reliably bridge at the increased speeds and that ooze when tool changing is well controlled.\n" -"\n" -"For the wipe tower external perimeters the internal perimeter speed is used regardless of this setting." -msgstr "在換料塔中和換料塔稀疏層時的最快列印速度。在列印時，如果稀疏填充速度或從線材最大體積速度計算出的速度較低，則將使用較低的速度。\n" -"\n" -"在列印稀疏層時，如果內部周界速度或從線材最大體積速度計算出的速度較低，則將使用較低的速度。\n" -"\n" -"提高此速度可能會影響塔的穩定性，並增加噴嘴與換料塔上斑點的碰撞力。\n" -"\n" -"在將此參數提高於預設值 90mm/sec 以上之前，請確保你的印表設備能夠可靠地在更高的速度下橋接，並且工具更換時的溢出能良好的被控制。\n" -"\n" -"對於換料塔外部周邊，無論此設定如何，都使用內部周邊速度。" - -msgid "The extruder to use when printing perimeter of the wipe tower. Set to 0 to use the one that is available (non-soluble would be preferred)." -msgstr "列印換料塔周長時使用的擠出機。設置為 0 將使用唯一的擠出機（盡量使用不可溶的材料）。" - -msgid "Purging volumes - load/unload volumes" -msgstr "清理量 - 進料/退料 量" - -msgid "This vector saves required volumes to change from/to each tool used on the wipe tower. These values are used to simplify creation of the full purging volumes below." -msgstr "可保存所需的體積，用於更改每個換料塔上工具所使用的 from/to 體積 。這些值用於簡化完全沖刷體積的建立。" - -msgid "Purging after filament change will be done inside objects' infills. This may lower the amount of waste and decrease the print time. If the walls are printed with transparent filament, the mixed color infill will be seen outside. It will not take effect, unless the prime tower is enabled." -msgstr "多色列印換色後的廢料會被用來列印物件的填充。這樣可以減少線材浪費和縮短列印時間，但是如果物件的內外牆是採用透明線材列印的，則可以從模型外觀上看到內部的混色廢料。該功能只有在啟用換料塔的時候才生效。" - -msgid "Purging after filament change will be done inside objects' support. This may lower the amount of waste and decrease the print time. It will not take effect, unless the prime tower is enabled." -msgstr "多色列印換色後的廢料會被用來列印物件的支撐。這樣可以減少線材浪費和縮短列印時間。該功能只有在啟用換料塔的時候才生效。" - -msgid "This object will be used to purge the nozzle after a filament change to save filament and decrease the print time. Colours of the objects will be mixed as a result. It will not take effect, unless the prime tower is enabled." -msgstr "多色列印換色後的廢料會被用來列印這個物件。這樣可以減少線材浪費和縮短列印時間，但是這個物件的外觀會是混色的。該功能只有在啟用換料塔的時候才生效。" - -msgid "Maximal bridging distance" -msgstr "最大橋接距離" - -msgid "Maximal distance between supports on sparse infill sections." -msgstr "稀疏填充截面上的支撐之間的最大距離。" - -msgid "Wipe tower purge lines spacing" -msgstr "換料塔線距" - -msgid "Spacing of purge lines on the wipe tower." -msgstr "換料塔上的線距。" - -msgid "Extra flow for purging" -msgstr "額外換料流量" - -msgid "Extra flow used for the purging lines on the wipe tower. This makes the purging lines thicker or narrower than they normally would be. The spacing is adjusted automatically." -msgstr "用於換料塔上的換料的額外流量。這會使列印線比正常情況更粗或更細。間距會自動調整。" - -msgid "Idle temperature" -msgstr "閒置溫度" - -msgid "Nozzle temperature when the tool is currently not used in multi-tool setups.This is only used when 'Ooze prevention' is active in Print Settings. Set to 0 to disable." -msgstr "當工具頭在多工具頭設置中未使用時的噴嘴溫度。僅在「列印設定」中啟用「溢出預防」時有效。設置 0 為禁用。" - -msgid "X-Y hole compensation" -msgstr "X-Y 孔洞尺寸補償" - -msgid "Holes of object will be grown or shrunk in XY plane by the configured value. Positive value makes holes bigger. Negative value makes holes smaller. This function is used to adjust size slightly when the object has assembling issue" -msgstr "垂直的孔洞的尺寸將在X-Y方向收縮或拓展特定值。正值代表擴大孔洞。負值代表縮小孔洞。這個功能通常在模型有裝配問題時微調尺寸" - -msgid "X-Y contour compensation" -msgstr "X-Y 外輪廓尺寸補償" - -msgid "Contour of object will be grown or shrunk in XY plane by the configured value. Positive value makes contour bigger. Negative value makes contour smaller. This function is used to adjust size slightly when the object has assembling issue" -msgstr "模型外輪廓的尺寸將在X-Y方向收縮或拓展特定值。正值代表擴大。負值代表縮小。這個功能通常在模型有裝配問題時微調尺寸" - -msgid "Convert holes to polyholes" -msgstr "將圓孔轉換為多邊形孔" - -msgid "Search for almost-circular holes that span more than one layer and convert the geometry to polyholes. Use the nozzle size and the (biggest) diameter to compute the polyhole.\n" -"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" -msgstr "" - -msgid "Polyhole detection margin" -msgstr "偵測多邊形孔邊緣" - -#, no-c-format, no-boost-format -msgid "Maximum defection of a point to the estimated radius of the circle.\n" -"As cylinders are often exported as triangles of varying size, points may not be on the circle circumference. This setting allows you some leeway to broaden the detection.\n" -"In mm or in % of the radius." -msgstr "點到圓半徑的最大偏差。\n" -"由於圓柱體通常被導出為大小不同的三角形，因此點可能不在圓周上。\n" -"此設定允許有一些餘地來擴大偵測範圍。\n" -"以 mm 或半徑的百分比 ％％ 表示。" - -msgid "Polyhole twist" -msgstr "扭曲多邊形孔" - -msgid "Rotate the polyhole every layer." -msgstr "依層旋轉多邊形孔" - -msgid "G-code thumbnails" -msgstr "G-code 縮圖" - -msgid "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\"" -msgstr "將被儲存到 .gcode 和 .sl1/.sl1s 檔案中圖片尺寸，格式如下：\"XxY, XxY, ...\"" - -msgid "Format of G-code thumbnails" -msgstr "G-code 縮圖的格式" - -msgid "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, QOI for low memory firmware" -msgstr "G-code 縮圖的格式：PNG 品質最佳，JPG 檔案最小，QOI 最低記憶體韌體" - -msgid "Use relative E distances" -msgstr "使用相對 E 距離" - -msgid "Relative extrusion is recommended when using \"label_objects\" option.Some extruders work better with this option unchecked (absolute extrusion mode). Wipe tower is only compatible with relative mode. It is recommended on most printers. Default is checked" -msgstr "建議在使用「標籤物件」選項時使用相對擠出。某些擠出機取消此選項（絕對擠出模式）時工作效果更好。換料塔僅與相對模式兼容。建議在大部分印表設備上使用。預設為啟用。" - -msgid "Classic wall generator produces walls with constant extrusion width and for very thin areas is used gap-fill. Arachne engine produces walls with variable extrusion width" -msgstr "經典牆產生器產生的牆走線具有一致的擠出寬度，對狹窄區域使用填縫。Arachne 引擎則產生變線寬的牆走線" - -msgid "Classic" -msgstr "經典" - -msgid "Arachne" -msgstr "Arachne" - -msgid "Wall transition length" -msgstr "牆過渡長度" - -msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall segments. It's expressed as a percentage over nozzle diameter" -msgstr "當零件逐漸變薄導致牆的層數發生變化時，需要在過渡段分配一定的空間來分割和連接牆走線。參數值表示為相對於噴嘴直徑的百分比" - -msgid "Wall transitioning filter margin" -msgstr "牆過渡過濾間距" - -msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of extrusion widths which follow to [Minimum wall width - margin, 2 * Minimum wall width + margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large extrusion width variation can lead to under- or overextrusion problems. It's expressed as a percentage over nozzle diameter" -msgstr "防止特定厚度變化規律的局部在多一層牆和少一層牆之間來迴轉換。這個參數將擠壓寬度的範圍擴大到[牆最小寬度-參數值, 2*牆最小寬度+參數值]。增大參數可以減少轉換的次數，從而減少擠出開始/停止和空駛的時間。然而，大的擠出寬度變化會導致過擠出或欠擠出的問題。參數值表示為相對於噴嘴直徑的百分比" - -msgid "Wall transitioning threshold angle" -msgstr "牆過渡臨界值角度" - -msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude" -msgstr "何時在偶數和奇數牆層數之間創建過渡段。角度大於這個臨界值的楔形將不創建過渡段，並且不會在楔形中心列印牆走線以填補剩餘空間。減小這個數值能減少中心牆走線的數量和長度，但可能會導致間隙或者過擠出" - -msgid "Wall distribution count" -msgstr "牆分布計數" - -msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width" -msgstr "從中心開始計算的牆層數，線寬變化需要分布在這些牆走線上。較低的數值意味著外牆寬度更不易被改變" - -msgid "Minimum feature size" -msgstr "最小特徵尺寸" - -msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum feature size will be widened to the Minimum wall width. It's expressed as a percentage over nozzle diameter" -msgstr "薄壁特徵的最小厚度。比這個數值還薄的特徵將不被列印，而比最小特徵厚度還厚的特征將被加寬到牆最小寬度。參數值表示為相對噴嘴直徑的百分比" - -msgid "Minimum wall length" -msgstr "最短牆長" - -msgid "Adjust this value to prevent short, unclosed walls from being printed, which could increase print time. Higher values remove more and longer walls.\n" -"\n" -"NOTE: Bottom and top surfaces will not be affected by this value to prevent visual gaps on the outside of the model. Adjust 'One wall threshold' in the Advanced settings below to adjust the sensitivity of what is considered a top-surface. 'One wall threshold' is only visible if this setting is set above the default value of 0.5, or if single-wall top surfaces is enabled." -msgstr "調整此值可防止列印短的、未閉合的牆面，這些可能會增加列印時間。較高的值會移除更多、更長的牆面。\n" -"\n" -"注意：底部和頂部表面不受此值影響，以防止模型外部出現視覺間隙。調整下面的「高級設定」中的「單壁閾值」來調整對什麼被視為頂表面的敏感度。「單壁閾值」僅在此設定設置為大於預設值 0.5或啟用單壁頂部表面時可見。" - -msgid "First layer minimum wall width" -msgstr "首層牆最小線寬" - -msgid "The minimum wall width that should be used for the first layer is recommended to be set to the same size as the nozzle. This adjustment is expected to enhance adhesion." -msgstr "應用於首層的牆最小線寬，建議設定與噴嘴尺寸相同。這種調整有助於增強附著力。" - -msgid "Minimum wall width" -msgstr "牆最小線寬" - -msgid "Width of the wall that will replace thin features (according to the Minimum feature size) of the model. If the Minimum wall width is thinner than the thickness of the feature, the wall will become as thick as the feature itself. It's expressed as a percentage over nozzle diameter" -msgstr "" - -msgid "Detect narrow internal solid infill" -msgstr "識別狹窄內部實心填充" - -msgid "This option will auto detect narrow internal solid infill area. If enabled, concentric pattern will be used for the area to speed printing up. Otherwise, rectilinear pattern is used by default." -msgstr "此選項用於自動識別內部狹窄的實心填充。開啟後，將對狹窄實心區域使用同心填充加快列印速度。否則使用預設的直線填充。" - -msgid "invalid value " -msgstr "無效值" - -msgid "Invalid value when spiral vase mode is enabled: " -msgstr "值於花瓶模式無效：" - -msgid "too large line width " -msgstr "線寬過大" - -msgid " not in range " -msgstr " 不在合理的區間" - -msgid "Minimum save" -msgstr "" - -msgid "export 3mf with minimum size." -msgstr "匯出最小尺寸的 3mf。" - -msgid "No check" -msgstr "不檢查" - -msgid "Do not run any validity checks, such as gcode path conflicts check." -msgstr "不要執行任何有效性檢查，如 G-code 路徑衝突檢查。" - -msgid "Ensure on bed" -msgstr "確認在列印板上" - -msgid "Lift the object above the bed when it is partially below. Disabled by default" -msgstr "當物件部分位於列印板的下方時，將其提升到列印板的上方。預設情況下禁用" - -msgid "Orient Options" -msgstr "" - -msgid "Orient options: 0-disable, 1-enable, others-auto" -msgstr "" - -msgid "Rotation angle around the Z axis in degrees." -msgstr "繞 Z 軸的旋轉角度（以度為單位）。" - -msgid "Rotate around Y" -msgstr "繞 Y 旋轉" - -msgid "Rotation angle around the Y axis in degrees." -msgstr "繞 Y 軸的旋轉角度（以度為單位）" - -msgid "Data directory" -msgstr "檔案目錄" - -msgid "Load and store settings at the given directory. This is useful for maintaining different profiles or including configurations from a network storage." -msgstr "指定目錄用以載入或儲存設定檔。 這對於維護不同的設定檔或包含來自網路儲存的設定檔非常有用。" - -msgid "Load custom gcode" -msgstr "載入自訂 G-code" - -msgid "Load custom gcode from json" -msgstr "從 json 載入自訂 gcode" - -msgid "Current z-hop" -msgstr "" - -msgid "Contains z-hop present at the beginning of the custom G-code block." -msgstr "" - -msgid "Position of the extruder at the beginning of the custom G-code block. If the custom G-code travels somewhere else, it should write to this variable so OrcaSlicer knows where it travels from when it gets control back." -msgstr "自訂 G-code 區塊開頭的擠出機位置。如果自訂 G-code 移動到了其他位置，應該寫入此變數，以便 OrcaSlicer 知道它從哪裡移動到當它重新獲得控制權時。" - -msgid "Retraction state at the beginning of the custom G-code block. If the custom G-code moves the extruder axis, it should write to this variable so OrcaSlicer de-retracts correctly when it gets control back." -msgstr "自訂 G-code 區塊開頭的回抽狀態。如果自訂 G-code 移動了擠出機軸，應該寫入此變數，以便 OrcaSlicer 在重新獲得控制權時正確返回抽。" - -msgid "Extra de-retraction" -msgstr "額外返回抽" - -msgid "Currently planned extra extruder priming after de-retraction." -msgstr "" - -msgid "Absolute E position" -msgstr "絕對擠出值" - -msgid "Current position of the extruder axis. Only used with absolute extruder addressing." -msgstr "擠出機軸的目前位置。僅用於絕對擠出值。" - -msgid "Current extruder" -msgstr "目前使用的擠出機" - -msgid "Zero-based index of currently used extruder." -msgstr "目前使用的擠出機的索引，從 0 開始。" - -msgid "Current object index" -msgstr "目前列印物件的索引" - -msgid "Specific for sequential printing. Zero-based index of currently printed object." -msgstr "特定於序列列印。目前列印物件的索引，從 0 開始。" - -msgid "Has wipe tower" -msgstr "有換料塔" - -msgid "Whether or not wipe tower is being generated in the print." -msgstr "是否有產生換料塔" - -msgid "Initial extruder" -msgstr "初始擠出機" - -msgid "Zero-based index of the first extruder used in the print. Same as initial_tool." -msgstr "列印中使用的第一個擠出機的索引，從 0 開始。與 initial_tool 相同。" - -msgid "Initial tool" -msgstr "初始工具頭" - -msgid "Zero-based index of the first extruder used in the print. Same as initial_extruder." -msgstr "列印中使用的第一個擠出機的索引，從 0 開始。與 initial_extruder 相同。" - -msgid "Is extruder used?" -msgstr "擠出機是否被使用?" - -msgid "Vector of booleans stating whether a given extruder is used in the print." -msgstr "" - -msgid "Has single extruder MM priming" -msgstr "" - -msgid "Are the extra multi-material priming regions used in this print?" -msgstr "" - -msgid "Volume per extruder" -msgstr "各擠出機線材體積" - -msgid "Total filament volume extruded per extruder during the entire print." -msgstr "整個列印過程中，每個噴頭擠出的線材總體積。" - -msgid "Total toolchanges" -msgstr "換色次數" - -msgid "Number of toolchanges during the print." -msgstr "列印期間工具頭變更次數" - -msgid "Total volume" -msgstr "總體積" - -msgid "Total volume of filament used during the entire print." -msgstr "列印總線材體積" - -msgid "Weight per extruder" -msgstr "各擠出機擠出總重" - -msgid "Weight per extruder extruded during the entire print. Calculated from filament_density value in Filament Settings." -msgstr "各擠出機擠出總重，依據線材密度計算" - -msgid "Total weight" -msgstr "總重" - -msgid "Total weight of the print. Calculated from filament_density value in Filament Settings." -msgstr "列印總重，依據線材密度計算" - -msgid "Total layer count" -msgstr "總層數" - -msgid "Number of layers in the entire print." -msgstr "列印總層數" - -msgid "Number of objects" -msgstr "物件數量" - -msgid "Total number of objects in the print." -msgstr "列印總物件數量" - -msgid "Number of instances" -msgstr "" - -msgid "Total number of object instances in the print, summed over all objects." -msgstr "" - -msgid "Scale per object" -msgstr "各物件縮放" - -msgid "Contains a string with the information about what scaling was applied to the individual objects. Indexing of the objects is zero-based (first object has index 0).\n" -"Example: 'x:100% y:50% z:100'." -msgstr "包含一個字串，描述了每個物件縮放的資訊。第一個物件索引為 0。例如：'x:100% y:50% z:100'" - -msgid "Input filename without extension" -msgstr "輸入檔名（不含副檔名）" - -msgid "Source filename of the first object, without extension." -msgstr "第一個物件的原始檔名（不含副檔名）" - -msgid "The vector has two elements: x and y coordinate of the point. Values in mm." -msgstr "這個向量包含兩個元素：點的 x 和 y 座標，單位為毫米。" - -msgid "The vector has two elements: x and y dimension of the bounding box. Values in mm." -msgstr "這個向量包含兩個元素：邊界的 x 和 y 尺寸，單位為mm。" - -msgid "First layer convex hull" -msgstr "第一層凸包" - -msgid "Vector of points of the first layer convex hull. Each element has the following format:'[x, y]' (x and y are floating-point numbers in mm)." -msgstr "第一層凸包的點向量。每個元素格式為：'[x, y]'（x 和 y 是以mm為單位的實數）。" - -msgid "Bottom-left corner of first layer bounding box" -msgstr "第一層邊界左下角" - -msgid "Top-right corner of first layer bounding box" -msgstr "第一層邊界右上角" - -msgid "Size of the first layer bounding box" -msgstr "第一層邊界大小" - -msgid "Bottom-left corner of print bed bounding box" -msgstr "列印平台邊界左下角" - -msgid "Top-right corner of print bed bounding box" -msgstr "列印平台邊界右上角" - -msgid "Size of the print bed bounding box" -msgstr "列印平台邊界大小" - -msgid "Timestamp" -msgstr "時間戳記" - -msgid "String containing current time in yyyyMMdd-hhmmss format." -msgstr "yyyyMMdd-hhmmss 格式的目前時間字串" - -msgid "Day" -msgstr "天" - -msgid "Hour" -msgstr "小時" - -msgid "Minute" -msgstr "分" - -msgid "Print preset name" -msgstr "列印預設名稱" - -msgid "Name of the print preset used for slicing." -msgstr "切片使用的列印預設名稱" - -msgid "Filament preset name" -msgstr "線材預設名稱" - -msgid "Names of the filament presets used for slicing. The variable is a vector containing one name for each extruder." -msgstr "切片使用的各個擠出機的線材預設名稱。此變數是一個向量，包含每個擠出機相對應的名稱。" - -msgid "Printer preset name" -msgstr "列印設備預設名稱" - -msgid "Name of the printer preset used for slicing." -msgstr "用於切片的列印設備預設名稱" - -msgid "Physical printer name" -msgstr "列印設備名稱" - -msgid "Name of the physical printer used for slicing." -msgstr "用於切片的印表設備名稱。" - -msgid "Number of extruders" -msgstr "總擠出機數" - -msgid "Total number of extruders, regardless of whether they are used in the current print." -msgstr "總擠出機數，無論是否用於列印。" - -msgid "Layer number" -msgstr "層數" - -msgid "Index of the current layer. One-based (i.e. first layer is number 1)." -msgstr "當層數 (第一層為一)" - -msgid "Layer z" -msgstr "層 z 高" - -msgid "Height of the current layer above the print bed, measured to the top of the layer." -msgstr "目前這一層距離熱床的高度，從層頂開始計算。" - -msgid "Maximal layer z" -msgstr "層的最大 Z 軸高度。" - -msgid "Height of the last layer above the print bed." -msgstr "" - -msgid "Filament extruder ID" -msgstr "" - -msgid "The current extruder ID. The same as current_extruder." -msgstr "" - -msgid "Error in zip archive" -msgstr "zip 檔案中存在錯誤" - -msgid "Generating walls" -msgstr "產生內外牆" - -msgid "Generating infill regions" -msgstr "正在產生填充區域" - -msgid "Generating infill toolpath" -msgstr "正在產生填充走線" - -msgid "Detect overhangs for auto-lift" -msgstr "偵測懸空區域為自動抬升做準備" - -msgid "Generating support" -msgstr "正在產生支撐" - -msgid "Checking support necessity" -msgstr "正在檢查支撐必要性" - -msgid "floating regions" -msgstr "浮空區域" - -msgid "floating cantilever" -msgstr "浮空懸臂" - -msgid "large overhangs" -msgstr "大面積懸空" - -#, c-format, boost-format -msgid "It seems object %s has %s. Please re-orient the object or enable support generation." -msgstr "物件 %s 似乎有 %s。請重新調整物件的方向或啟用支撐。" - -msgid "Optimizing toolpath" -msgstr "正在最佳化走線" - -msgid "Slicing mesh" -msgstr "正在切片網格" - -msgid "No layers were detected. You might want to repair your STL file(s) or check their size or thickness and retry.\n" -msgstr "" - -msgid "An object's XY size compensation will not be used because it is also color-painted.\n" -"XY Size compensation can not be combined with color-painting." -msgstr "物件的 XY 尺寸補償不會生效，因為在此物件上做過上色操作。\n" -"XY 尺寸補償不能與上色功能一起使用。" - -#, c-format, boost-format -msgid "Support: generate toolpath at layer %d" -msgstr "支撐：正在產生 %d 層的路徑" - -msgid "Support: detect overhangs" -msgstr "支撐：正在偵測懸空面" - -msgid "Support: generate contact points" -msgstr "支撐：正在產生接觸點" - -msgid "Support: propagate branches" -msgstr "支撐：正在生長樹枝" - -msgid "Support: draw polygons" -msgstr "支撐：正在產生多邊形" - -msgid "Support: generate toolpath" -msgstr "支撐：正在產生走線路徑" - -#, c-format, boost-format -msgid "Support: generate polygons at layer %d" -msgstr "支撐：正在產生 %d 層的多邊形" - -#, c-format, boost-format -msgid "Support: fix holes at layer %d" -msgstr "支撐：正在修補 %d 層的空洞" - -#, c-format, boost-format -msgid "Support: propagate branches at layer %d" -msgstr "支撐：正在生長 %d 層的樹枝" - -msgid "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." -msgstr "" - -msgid "Loading of a model file failed." -msgstr "載入模型檔案失敗。" - -msgid "The supplied file couldn't be read because it's empty" -msgstr "無法讀取提供的檔案，因為該檔案為空。" - -msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." -msgstr "未知的檔案格式。輸入檔案的副檔名必須為 .3mf 或 .zip .amf。" - -msgid "Canceled" -msgstr "已取消" - -msgid "load_obj: failed to parse" -msgstr "載入物件：解析失敗" - -msgid "load mtl in obj: failed to parse" -msgstr "載入物件材質：解析失敗" - -msgid "The file contains polygons with more than 4 vertices." -msgstr "該檔案包含超過 4 個頂點的多邊形。" - -msgid "The file contains polygons with less than 2 vertices." -msgstr "該檔案包含少於 2 個頂點的多邊形。" - -msgid "The file contains invalid vertex index." -msgstr "檔案包含無效的頂點索引。" - -msgid "This OBJ file couldn't be read because it's empty." -msgstr "無法讀取此 OBJ 檔案，因為它是空的。" - -msgid "Flow Rate Calibration" -msgstr "流量比例校準" - -msgid "Max Volumetric Speed Calibration" -msgstr "最大體積速度校準" - -msgid "Manage Result" -msgstr "管理結果" - -msgid "Manual Calibration" -msgstr "手動校準" - -msgid "Result can be read by human eyes." -msgstr "結果可由人眼讀取。" - -msgid "Auto-Calibration" -msgstr "自動校準" - -msgid "We would use Lidar to read the calibration result" -msgstr "將使用雷射雷達來讀取校準結果。" - -msgid "Prev" -msgstr "上一個" - -msgid "Recalibration" -msgstr "重新校準" - -msgid "Calibrate" -msgstr "校準" - -msgid "Finish" -msgstr "完成" - -msgid "How to use calibration result?" -msgstr "如何使用校準結果？" - -msgid "You could change the Flow Dynamics Calibration Factor in material editing" -msgstr "你可以在線材編輯中更改流量動態校準因子。" - -msgid "The current firmware version of the printer does not support calibration.\n" -"Please upgrade the printer firmware." -msgstr "列印設備目前的韌體版本不支援校準。\n" -"請升級列印設備韌體。" - -msgid "Calibration not supported" -msgstr "不支援校準" - -msgid "Error desc" -msgstr "錯誤描述" - -msgid "Extra info" -msgstr "額外資訊" - -msgid "Flow Dynamics" -msgstr "動態流量" - -msgid "Flow Rate" -msgstr "流量比例" - -msgid "Max Volumetric Speed" -msgstr "最大體積速度" - -#, c-format, boost-format -msgid "Please input valid values:\n" -"Start value: >= %.1f\n" -"End value: <= %.1f\n" -"End value: > Start value\n" -"Value step: >= %.3f)" -msgstr "請輸入有效值：\n" -"起始值：>= %.1f\n" -"終止值：<= %.1f\n" -"終止值：> 起始值\n" -"步距：>= %.3f）" - -msgid "The name cannot be empty." -msgstr "名稱不能為空。" - -#, c-format, boost-format -msgid "The selected preset: %s is not found." -msgstr "找不到所選的預設：%s。" - -msgid "The name cannot be the same as the system preset name." -msgstr "名稱不能與系統預設值名稱相同。" - -msgid "The name is the same as another existing preset name" -msgstr "該名稱與另一個現有預設值名稱相同。" - -msgid "create new preset failed." -msgstr "新增預設失敗" - -msgid "Are you sure to cancel the current calibration and return to the home page?" -msgstr "你確定要取消目前的校準並返回首頁嗎？" - -msgid "No Printer Connected!" -msgstr "沒有連接列印設備！" - -msgid "Printer is not connected yet." -msgstr "列印設備尚未連接。" - -msgid "Please select filament to calibrate." -msgstr "請選擇要校準的線材。" - -msgid "The input value size must be 3." -msgstr "輸入值必須為 3。" - -msgid "This machine type can only hold 16 history results per nozzle. You can delete the existing historical results and then start calibration. Or you can continue the calibration, but you cannot create new calibration historical results. \n" -"Do you still want to continue the calibration?" -msgstr "此機型每個噴嘴只能儲存 16 筆歷史記錄。你可以刪除現有的歷史記錄，然後開始校準。或者你可以繼續校準，但無法建立新的校準歷史記錄。\n" -"是否仍要繼續校準？" - -msgid "Connecting to printer..." -msgstr "正在連接列印設備..." - -msgid "The failed test result has been dropped." -msgstr "測試失敗的結果已被刪除。" - -msgid "Flow Dynamics Calibration result has been saved to the printer" -msgstr "動態流量校準的結果已儲存至列印設備。" - -#, c-format, boost-format -msgid "There is already a historical calibration result with the same name: %s. Only one of the results with the same name is saved. Are you sure you want to override the historical result?" -msgstr "已經有一個同名的歷史校準結果：%s。僅保存同名結果中的其中一個。確定要覆寫歷史結果嗎？" - -#, c-format, boost-format -msgid "This machine type can only hold %d history results per nozzle. This result will not be saved." -msgstr "此機型每個噴嘴只能儲存 %d 筆歷史記錄。此結果將不會被保存。" - -msgid "Internal Error" -msgstr "內部錯誤" - -msgid "Please select at least one filament for calibration" -msgstr "請至少選擇一種線材進行校準。" - -msgid "Flow rate calibration result has been saved to preset" -msgstr "流量比例校準結果已儲存到預設值" - -msgid "Max volumetric speed calibration result has been saved to preset" -msgstr "最大體積速度校準結果已儲存到預設值" - -msgid "When do you need Flow Dynamics Calibration" -msgstr "在什麼情況下需要進行動態流量校準" - -msgid "We now have added the auto-calibration for different filaments, which is fully automated and the result will be saved into the printer for future use. You only need to do the calibration in the following limited cases:\n" -"1. If you introduce a new filament of different brands/models or the filament is damp;\n" -"2. if the nozzle is worn out or replaced with a new one;\n" -"3. If the max volumetric speed or print temperature is changed in the filament setting." -msgstr "我們現在已經為不同的列印線材新增了自動校準功能，該功能是完全自動化的，並且結果將儲存在列印設備中以供將來使用。你只需要在以下有限情況下進行校準：\n" -"1. 如果你引入了不同品牌/型號的新列印線材，或者列印線材受潮；\n" -"2. 如果噴嘴磨損或更換了新的噴嘴；\n" -"3. 如果你在列印線材設定中更改了最大體積速度或列印溫度。" - -msgid "About this calibration" -msgstr "關於此校準" - -msgid "Please find the details of Flow Dynamics Calibration from our wiki.\n" -"\n" -"Usually the calibration is unnecessary. When you start a single color/material print, with the \"flow dynamics calibration\" option checked in the print start menu, the printer will follow the old way, calibrate the filament before the print; When you start a multi color/material print, the printer will use the default compensation parameter for the filament during every filament switch which will have a good result in most cases.\n" -"\n" -"Please note that there are a few cases that can make the calibration results unreliable, such as insufficient adhesion on the build plate. Improving adhesion can be achieved by washing the build plate or applying glue. For more information on this topic, please refer to our Wiki.\n" -"\n" -"The calibration results have about 10 percent jitter in our test, which may cause the result not exactly the same in each calibration. We are still investigating the root cause to do improvements with new updates." -msgstr "請參考我們的 Wiki 頁面，了解「流體動力校準」的詳細資訊。\n" -"\n" -"通常不需要進行校準。當你啟動單色/單材質列印，並在列印開始選單中勾選「流體動力校準」選項時，列印設備將按照舊方式，在列印前校準耗材。當你啟動多色/多材質列印時，列印設備將在每次耗材切換時使用預設的補償參數，這在大部分情況下都能得到良好的結果。\n" -"\n" -"請注意，有些情況可能會導致校準結果不可靠，例如列印板上的黏著力不足。你可以通過清洗印板板或塗抹膠水來改善黏著力。有關此主題的更多資訊，請參考我們的 Wiki。\n" -"\n" -"在我們的測試中，校準結果存在約 10% 的誤差，這可能導致每次校準的結果不完全相同。我們仍在調查根本原因，並將在新的更新中進行改進。" - -msgid "When to use Flow Rate Calibration" -msgstr "何時使用流量率校準" - -msgid "After using Flow Dynamics Calibration, there might still be some extrusion issues, such as:\n" -"1. Over-Extrusion: Excess material on your printed object, forming blobs or zits, or the layers seem thicker than expected and not uniform.\n" -"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the top layer of the model, even when printing slowly.\n" -"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" -"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as they should be." -msgstr "使用流量動態校準後，仍可能出現一些擠出問題，例如：\n" -"1. 過度擠出：列印物體上有過多的線材，形成凸起或小球，或者層次看起來比預期的厚而且不均勻。\n" -"2. 不足擠出：層次非常薄，填充強度不足，或者在緩慢列印時模型頂層有缺陷。\n" -"3. 表面品質差：列印的表面看起來粗糙或不均勻。\n" -"4. 結構穩固性差：列印物件容易斷裂，或者沒有應有的穩固性。" - -msgid "In addition, Flow Rate Calibration is crucial for foaming materials like LW-PLA used in RC planes. These materials expand greatly when heated, and calibration provides a useful reference flow rate." -msgstr "此外，對於像用於遙控飛機的輕質發泡 PLA（LW-PLA）這樣的發泡線材，流量率校準非常重要。這些線材在加熱時會大幅膨脹，而校準提供了有用的流量率參考。" - -msgid "Flow Rate Calibration measures the ratio of expected to actual extrusion volumes. The default setting works well in Bambu Lab printers and official filaments as they were pre-calibrated and fine-tuned. For a regular filament, you usually won't need to perform a Flow Rate Calibration unless you still see the listed defects after you have done other calibrations. For more details, please check out the wiki article." -msgstr "流量率校準測量預期擠出體積與實際擠出體積之間的比率。預設設定在 Bambu Lab 列印設備和官方線材上表現良好，因為它們已經進行了預先校準和微調。對於普通的線材，通常情況下，你不需要執行流量率校準，除非在完成其他校準後仍然看到上述列出的缺陷。如需更多詳細資訊，請查閱 wiki 文章。" - -msgid "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, directly measuring the calibration patterns. However, please be advised that the efficacy and accuracy of this method may be compromised with specific types of materials. Particularly, filaments that are transparent or semi-transparent, sparkling-particled, or have a high-reflective finish may not be suitable for this calibration and can produce less-than-desirable results.\n" -"\n" -"The calibration results may vary between each calibration or filament. We are still improving the accuracy and compatibility of this calibration through firmware updates over time.\n" -"\n" -"Caution: Flow Rate Calibration is an advanced process, to be attempted only by those who fully understand its purpose and implications. Incorrect usage can lead to sub-par prints or printer damage. Please make sure to carefully read and understand the process before doing it." -msgstr "自動流量率校準採用 Bambu Lab 的雷射雷達技術，直接測量校準圖案。然而，請注意，這種方法的功效和準確性可能會因特定類型的線材而受影響。特別是透明或半透明、帶有閃光顆粒或具有高反射表面的線材可能不適合這種校準，並可能產生不理想的結果。\n" -"\n" -"校準結果可能因每次校準或線材的不同而有所不同。我們仍在透過韌體更新不斷提高這種校準的準確性和相容性。\n" -"\n" -"注意：流量率校準是一項先進的技術，只有完全理解其目的和影響的人才應嘗試。錯誤的使用可能導致列印品質不佳或損壞列印設備。請確保在執行之前仔細閱讀和理解此過程。" - -msgid "When you need Max Volumetric Speed Calibration" -msgstr "當你需要最大體積速度校準時" - -msgid "Over-extrusion or under extrusion" -msgstr "過度擠壓或擠壓不足" - -msgid "Max Volumetric Speed calibration is recommended when you print with:" -msgstr "使用以下選項列印時，建議進行最大體積速度校準：" - -msgid "material with significant thermal shrinkage/expansion, such as..." -msgstr "具有顯著熱收縮/膨脹的材料，例如..." - -msgid "materials with inaccurate filament diameter" -msgstr "線材直徑不準確的線材" - -msgid "We found the best Flow Dynamics Calibration Factor" -msgstr "我們找到了最佳的流量動態校準因子。" - -msgid "Part of the calibration failed! You may clean the plate and retry. The failed test result would be dropped." -msgstr "部分校準失敗！ 你可以清潔列印板並重試。 失敗的測試結果將不會儲存。" - -msgid "*We recommend you to add brand, materia, type, and even humidity level in the Name" -msgstr "*我們建議你在名稱中加入品牌、材料、類型，甚至濕度水平。" - -msgid "Failed" -msgstr "失敗" - -msgid "Please enter the name you want to save to printer." -msgstr "請輸入要儲存到列印設備的名稱。" - -msgid "The name cannot exceed 40 characters." -msgstr "名稱不能超過40個字元。" - -msgid "Only one of the results with the same name will be saved. Are you sure you want to override the other results?" -msgstr "同名的結果只能儲存一個，是否要覆蓋其他結果?" - -msgid "Please find the best line on your plate" -msgstr "請在你的列印板上找到最佳線條" - -msgid "Please find the corner with perfect degree of extrusion" -msgstr "請找到最完美的列印角度" - -msgid "Input Value" -msgstr "輸入值" - -msgid "Save to Filament Preset" -msgstr "儲存到材料預設" - -msgid "Preset" -msgstr "預設" - -msgid "Record Factor" -msgstr "記錄係數" - -msgid "We found the best flow ratio for you" -msgstr "我們為你找到了最佳流量比" - -msgid "Flow Ratio" -msgstr "流量比" - -msgid "Please input a valid value (0.0 < flow ratio < 2.0)" -msgstr "請輸入一個有效值（0.0<流量比<2.0）" - -msgid "Please enter the name of the preset you want to save." -msgstr "請輸入要儲存的預設名稱。" - -msgid "Calibration1" -msgstr "校準 1" - -msgid "Calibration2" -msgstr "校準 2" - -#, fuzzy -msgid "Please find the best object on your plate" -msgstr "請在你的列印板裡找到最好的物件" - -msgid "Fill in the value above the block with smoothest top surface" -msgstr "用最光滑的頂面填充塊上方的值" - -msgid "Skip Calibration2" -msgstr "跳過校準2" - -#, c-format, boost-format -msgid "flow ratio : %s " -msgstr "流量比：%s " - -msgid "Please choose a block with smoothest top surface" -msgstr "請選擇頂部表面最光滑的塊" - -msgid "Please choose a block with smoothest top surface." -msgstr "請選擇頂部表面最光滑的塊。" - -msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" -msgstr "請輸入一個有效值（0<=最大體積速度<=60）" - -msgid "Calibration Type" -msgstr "校準類型" - -msgid "Complete Calibration" -msgstr "完整校準" - -msgid "Fine Calibration based on flow ratio" -msgstr "基於流量比的精細校準" - -msgid "Title" -msgstr "標題" - -msgid "A test model will be printed. Please clear the build plate and place it back to the hot bed before calibration." -msgstr "將列印一份測試模型。在校準之前，請清理列印板並將其放回熱床上。" - -msgid "Printing Parameters" -msgstr "列印參數" - -msgid "Plate Type" -msgstr "熱床類型" - -msgid "filament position" -msgstr "線材位置" - -msgid "External Spool" -msgstr "外部線軸" - -msgid "Filament For Calibration" -msgstr "校準用線材" - -msgid "Tips for calibration material: \n" -"- Materials that can share same hot bed temperature\n" -"- Different filament brand and family(Brand = Bambu, Family = Basic, Matte)" -msgstr "校準線材提示：\n" -"-可以共享相同熱床溫度的線材\n" -"-不同的線材品牌和系列（Brand = Bambu, Family = Basic, Matte）" - -msgid "Pattern" -msgstr "花紋" - -msgid "Method" -msgstr "方法" - -#, c-format, boost-format -msgid "%s is not compatible with %s" -msgstr "%s 與 %s 不相容" - -msgid "TPU is not supported for Flow Dynamics Auto-Calibration." -msgstr "不支援 TPU 進行流量動態自動校準。" - -msgid "Connecting to printer" -msgstr "正在連接列印設備" - -msgid "From k Value" -msgstr "從 k 值" - -msgid "To k Value" -msgstr "至 k 值" - -msgid "Step value" -msgstr "步進值" - -msgid "The nozzle diameter has been synchronized from the printer Settings" -msgstr "噴嘴直徑已從列印設備設定中同步" - -msgid "From Volumetric Speed" -msgstr "從體積速度" - -msgid "To Volumetric Speed" -msgstr "至體積速度" - -msgid "Flow Dynamics Calibration Result" -msgstr "動態流量校準結果" - -msgid "New" -msgstr "新增" - -msgid "No History Result" -msgstr "無歷史結果" - -msgid "Success to get history result" -msgstr "成功獲取歷史結果" - -msgid "Refreshing the historical Flow Dynamics Calibration records" -msgstr "重整歷史流量動態校準記錄" - -msgid "Action" -msgstr "操作" - -#, c-format, boost-format -msgid "This machine type can only hold %d history results per nozzle." -msgstr "此設備型號每個噴嘴僅能儲存 %d 筆歷史結果。" - -msgid "Edit Flow Dynamics Calibration" -msgstr "編輯動態流量校準" - -msgid "New Flow Dynamic Calibration" -msgstr "重新校準動態流量" - -msgid "Ok" -msgstr "" - -msgid "The filament must be selected." -msgstr "必須選擇線材。" - -msgid "Network lookup" -msgstr "搜尋網路" - -msgid "Address" -msgstr "地址" - -msgid "Hostname" -msgstr "主機名" - -msgid "Service name" -msgstr "服務名" - -msgid "OctoPrint version" -msgstr "OctoPrint版本" - -msgid "Searching for devices" -msgstr "正在尋找設備" - -msgid "Finished" -msgstr "完成" - -msgid "Multiple resolved IP addresses" -msgstr "多個解析的 IP 位址" - -#, boost-format -msgid "There are several IP addresses resolving to hostname %1%.\n" -"Please select one that should be used." -msgstr "有多個 IP 位址解析到主機名稱 %1%。\n" -"請選擇一個要使用的 IP 位址。" - -msgid "PA Calibration" -msgstr "PA校準" - -msgid "DDE" -msgstr "近程擠出機" - -msgid "Bowden" -msgstr "遠程擠出機" - -msgid "Extruder type" -msgstr "擠出機類型" - -msgid "PA Tower" -msgstr "PA塔" - -msgid "PA Line" -msgstr "劃線模式" - -msgid "PA Pattern" -msgstr "V形模式" - -msgid "Start PA: " -msgstr "起始值" - -msgid "End PA: " -msgstr "結束值" - -msgid "PA step: " -msgstr "步距" - -msgid "Print numbers" -msgstr "列印數字" - -msgid "Please input valid values:\n" -"Start PA: >= 0.0\n" -"End PA: > Start PA\n" -"PA step: >= 0.001)" -msgstr "請輸入有效值：\n" -"起始PA：>= 0.0\n" -"結束PA：> 起始PA\n" -"PA步距：>= 0.001）" - -msgid "Temperature calibration" -msgstr "溫度校準" - -msgid "PLA" -msgstr "" - -msgid "ABS/ASA" -msgstr "" - -msgid "PETG" -msgstr "" - -msgid "PCTG" -msgstr "" - -msgid "TPU" -msgstr "" - -msgid "PA-CF" -msgstr "" - -msgid "PET-CF" -msgstr "" - -msgid "Filament type" -msgstr "線材類型" - -msgid "Start temp: " -msgstr "起始溫度： " - -msgid "End temp: " -msgstr "終止溫度" - -msgid "Temp step: " -msgstr "溫度步距" - -msgid "Please input valid values:\n" -"Start temp: <= 350\n" -"End temp: >= 170\n" -"Start temp > End temp + 5)" -msgstr "請輸入有效值：\n" -"起始溫度：<= 350\n" -"終止溫度：>= 170\n" -"開始溫度 > 終止溫度 + 5）" - -msgid "Max volumetric speed test" -msgstr "最大體積速度測試" - -msgid "Start volumetric speed: " -msgstr "起始流量" - -msgid "End volumetric speed: " -msgstr "結束流量" - -msgid "step: " -msgstr "步距" - -msgid "Please input valid values:\n" -"start > 0 \n" -"step >= 0\n" -"end > start + step)" -msgstr "請輸入有效值：\n" -"開始 > 0\n" -"步距 >= 0\n" -"結束 > 開始 + 步距）" - -msgid "VFA test" -msgstr "VFA震紋測試" - -msgid "Start speed: " -msgstr "起始速度" - -msgid "End speed: " -msgstr "結束速度" - -msgid "Please input valid values:\n" -"start > 10 \n" -"step >= 0\n" -"end > start + step)" -msgstr "請輸入有效值：\n" -"開始 > 10\n" -"步距 >= 0\n" -"結束 > 開始 + 步距）" - -msgid "Start retraction length: " -msgstr "起始回抽長度" - -msgid "End retraction length: " -msgstr "結束回抽長度" - -msgid "mm/mm" -msgstr "" - -msgid "Send G-Code to printer host" -msgstr "傳送 G-code 到列印設備" - -msgid "Upload to Printer Host with the following filename:" -msgstr "使用下列檔案名上傳到列印設備：" - -msgid "Use forward slashes ( / ) as a directory separator if needed." -msgstr "" - -msgid "Upload to storage" -msgstr "上傳到儲存單位" - -msgid "Switch to Device tab after upload." -msgstr "上傳後切換到設備分頁。" - -#, c-format, boost-format -msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" -msgstr "上傳的檔名不是 \"%s\" 結尾。確定要繼續嗎？" - -msgid "Upload" -msgstr "上傳" - -msgid "Print host upload queue" -msgstr "列印主機上傳佇列" - -msgid "ID" -msgstr "ID" - -msgid "Progress" -msgstr "進度" - -msgid "Host" -msgstr "主機" - -msgctxt "OfFile" -msgid "Size" -msgstr "尺寸" - -msgid "Filename" -msgstr "檔案名" - -msgid "Cancel selected" -msgstr "取消選取" - -msgid "Show error message" -msgstr "顯示錯誤資訊" - -msgid "Enqueued" -msgstr "已加入佇列" - -msgid "Uploading" -msgstr "正在上傳" - -msgid "Cancelling" -msgstr "取消中" - -msgid "Error uploading to print host" -msgstr "上傳到列印設備時發生錯誤" - -msgid "Unable to perform boolean operation on selected parts" -msgstr "無法對所選零件執行布林運算" - -msgid "Mesh Boolean" -msgstr "布林運算" - -msgid "Union" -msgstr "併集" - -msgid "Difference" -msgstr "差集" - -msgid "Intersection" -msgstr "交集" - -msgid "Source Volume" -msgstr "" - -msgid "Tool Volume" -msgstr "" - -msgid "Subtract from" -msgstr "從中減去" - -msgid "Subtract with" -msgstr "與之相減" - -msgid "selected" -msgstr "已選取" - -msgid "Part 1" -msgstr "零件 1" - -msgid "Part 2" -msgstr "零件 2" - -msgid "Delete input" -msgstr "刪除輸入" - -msgid "Network Test" -msgstr "網路測試" - -msgid "Start Test Multi-Thread" -msgstr "開始多續測試" - -msgid "Start Test Single-Thread" -msgstr "開始單續測試" - -msgid "Export Log" -msgstr "匯出記錄" - -msgid "OrcaSlicer Version:" -msgstr "OrcaSlicer 版本：" - -msgid "System Version:" -msgstr "系統版本：" - -msgid "DNS Server:" -msgstr "DNS 伺服器：" - -msgid "Test OrcaSlicer(GitHub)" -msgstr "測試 OrcaSlicer(GitHub)" - -msgid "Test OrcaSlicer(GitHub):" -msgstr "測試 OrcaSlicer(GitHub):" - -msgid "Test Bing.com" -msgstr "測試 Bing.com：" - -msgid "Test bing.com:" -msgstr "測試 bing.com：" - -msgid "Log Info" -msgstr "日誌資訊" - -msgid "Select filament preset" -msgstr "選擇線材預設" - -msgid "Create Filament" -msgstr "建立線材" - -msgid "Create Based on Current Filament" -msgstr "依據目前線材建立" - -msgid "Copy Current Filament Preset " -msgstr "複製目前的線材預設" - -msgid "Basic Information" -msgstr "基本資訊" - -msgid "Add Filament Preset under this filament" -msgstr "在此線材下新增線材預設" - -msgid "We could create the filament presets for your following printer:" -msgstr "可以為你以下的列印設備建立線材預設：" - -msgid "Select Vendor" -msgstr "選擇廠牌" - -msgid "Input Custom Vendor" -msgstr "輸入自訂廠牌" - -msgid "Can't find vendor I want" -msgstr "找不到我想要的廠牌" - -msgid "Select Type" -msgstr "選擇類型" - -msgid "Select Filament Preset" -msgstr "選擇線材預設" - -msgid "Serial" -msgstr "序號" - -msgid "e.g. Basic, Matte, Silk, Marble" -msgstr "例如：基本、霧面、絲光、大理石" - -msgid "Filament Preset" -msgstr "線材預設" - -msgid "Create" -msgstr "創建" - -msgid "Vendor is not selected, please reselect vendor." -msgstr "廠牌尚未選擇，請重新選擇廠牌。" - -msgid "Custom vendor is not input, please input custom vendor." -msgstr "自訂廠牌尚未輸入，請輸入自訂廠牌。" - -msgid "\"Bambu\" or \"Generic\" can not be used as a Vendor for custom filaments." -msgstr "「Bambu」或「Generic」不能作為自訂線材的廠牌名稱。" - -msgid "Filament type is not selected, please reselect type." -msgstr "線材類型尚未選擇，請重新選擇類型。" - -msgid "Filament serial is not entered, please enter serial." -msgstr "線材序號尚未輸入，請輸入序號。" - -msgid "There may be escape characters in the vendor or serial input of filament. Please delete and re-enter." -msgstr "線材的廠牌或序號輸入中可能包含跳脫字元，請刪除並重新輸入。" - -msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." -msgstr "自訂廠牌或序號中的所有輸入都是空白，請重新輸入。" - -msgid "The vendor can not be a number. Please re-enter." -msgstr "廠牌不能為數字，請重新輸入。" - -msgid "You have not selected a printer or preset yet. Please select at least one." -msgstr "尚未選擇列印設備或預設，請至少選擇一個。" - -#, c-format, boost-format -msgid "The Filament name %s you created already exists. \n" -"If you continue creating, the preset created will be displayed with its full name. Do you want to continue?" -msgstr "所建立的線材名稱 %s 已經存在。\n" -"如果繼續建立，預設將顯示完整的名稱。是否要繼續？" - -msgid "Some existing presets have failed to be created, as follows:\n" -msgstr "以下是一些現有的預設無法建立的原因：\n" - -msgid "\n" -"Do you want to rewrite it?" -msgstr "\n" -"確定要覆寫嗎？" - -msgid "We would rename the presets as \"Vendor Type Serial @printer you selected\". \n" -"To add preset for more printers, Please go to printer selection" -msgstr "將會將預設名稱重新命名為「廠牌 型號 序號 @選擇的列印設備」。\n" -"若要為更多列印設備新增預設，請前往列印設備選擇頁面。" - -msgid "Create Printer/Nozzle" -msgstr "建立列印設備/噴嘴" - -msgid "Create Printer" -msgstr "建立列印設備" - -msgid "Create Nozzle for Existing Printer" -msgstr "為現有列印設備建立噴嘴" - -msgid "Create from Template" -msgstr "從範本建立" - -msgid "Create Based on Current Printer" -msgstr "依據目前列印設備建立" - -msgid "Import Preset" -msgstr "匯入預設" - -msgid "Create Type" -msgstr "建立類型" - -msgid "The model is not found, please reselect vendor." -msgstr "找不到該型號，請重新選擇廠牌。" - -msgid "Select Model" -msgstr "選擇型號" - -msgid "Select Printer" -msgstr "Select Model" - -msgid "Input Custom Model" -msgstr "輸入自訂型號" - -msgid "Can't find my printer model" -msgstr "找不到我的列印設備型號" - -msgid "Rectangle" -msgstr "矩形" - -msgid "Printable Space" -msgstr "可列印空間" - -msgid "Hot Bed STL" -msgstr "熱床 STL" - -msgid "Load stl" -msgstr "載入 STL" - -msgid "Hot Bed SVG" -msgstr "熱床 SVG" - -msgid "Load svg" -msgstr "載入 SVG" - -msgid "Max Print Height" -msgstr "最大列印高度" - -#, c-format, boost-format -msgid "The file exceeds %d MB, please import again." -msgstr "檔案超過 %d MB，請重新匯入。" - -msgid "Exception in obtaining file size, please import again." -msgstr "取得檔案大小時發生例外，請重新匯入。" - -msgid "Preset path is not find, please reselect vendor." -msgstr "找不到預設路徑，請重新選擇廠牌。" - -msgid "The printer model was not found, please reselect." -msgstr "找不到列印設備型號，請重新選擇。" - -msgid "The nozzle diameter is not found, please reselect." -msgstr "找不到噴嘴直徑，請重新選擇。" - -msgid "The printer preset is not found, please reselect." -msgstr "未找到列印設備預設設定，請重新選擇。" - -msgid "Printer Preset" -msgstr "列印設備預設設定" - -msgid "Filament Preset Template" -msgstr "線材預設設定模板" - -msgid "Deselect All" -msgstr "取消全選" - -msgid "Process Preset Template" -msgstr "處理預設設定模板" - -msgid "Back Page 1" -msgstr "返回第一頁" - -msgid "You have not yet chosen which printer preset to create based on. Please choose the vendor and model of the printer" -msgstr "尚未選擇要基於哪個列印設備預設設定來創建，請選擇列印設備的廠牌和型號。" - -msgid "You have entered an illegal input in the printable area section on the first page. Please check before creating it." -msgstr "在第一頁的可列印區域部分輸入了無效的設定，請在創建前檢查。" - -msgid "The custom printer or model is not entered, please enter it." -msgstr "未輸入自訂列印設備或型號，請輸入。" - -msgid "The printer preset you created already has a preset with the same name. Do you want to overwrite it?\n" -"\tYes: Overwrite the printer preset with the same name, and filament and process presets with the same preset name will be recreated \n" -"and filament and process presets without the same preset name will be reserve.\n" -"\tCancel: Do not create a preset, return to the creation interface." -msgstr "創建的列印設備預設設定已經有相同名稱的預設設定。是否要覆蓋它？\n" -"\t是：覆蓋相同名稱的列印設備預設設定，並重新創建名稱相同的線材和處理預設設定，名稱不同的線材和處理預設設定將被保留。\n" -" \t取消：不創建預設設定，返回創建界面。" - -msgid "You need to select at least one filament preset." -msgstr "需要至少選擇一個線材預設設定。" - -msgid "You need to select at least one process preset." -msgstr "需要至少選擇一個處理預設設定。" - -msgid "Create filament presets failed. As follows:\n" -msgstr "創建線材預設設定失敗，原因如下：\n" - -msgid "Create process presets failed. As follows:\n" -msgstr "創建處理預設設定失敗，原因如下：\n" - -msgid "Vendor is not find, please reselect." -msgstr "未找到廠牌，請重新選擇。" - -msgid "Current vendor has no models, please reselect." -msgstr "目前廠牌沒有可用的型號，請重新選擇。" - -msgid "You have not selected the vendor and model or entered the custom vendor and model." -msgstr "你尚未選擇廠牌和型號，或未輸入自訂的廠牌和型號。" - -msgid "There may be escape characters in the custom printer vendor or model. Please delete and re-enter." -msgstr "自訂列印設備廠牌或型號中可能包含轉義字符。請刪除後重新輸入。" - -msgid "All inputs in the custom printer vendor or model are spaces. Please re-enter." -msgstr "自訂列印設備廠牌或型號的所有輸入為空格。請重新輸入。" - -msgid "Please check bed printable shape and origin input." -msgstr "請檢查熱床可列印區域形狀和原點設定。" - -msgid "You have not yet selected the printer to replace the nozzle, please choose." -msgstr "尚未選擇要更換噴嘴的列印設備，請選擇。" - -msgid "Create Printer Successful" -msgstr "列印設備創建成功" - -msgid "Create Filament Successful" -msgstr "線材創建成功" - -msgid "Printer Created" -msgstr "列印設備創建完成" - -msgid "Please go to printer settings to edit your presets" -msgstr "請前往列印設備設定編輯你的預設設定" - -msgid "Filament Created" -msgstr "線材創建完成" - -msgid "Please go to filament setting to edit your presets if you need.\n" -"Please note that nozzle temperature, hot bed temperature, and maximum volumetric speed has a significant impact on printing quality. Please set them carefully." -msgstr "如果需要，請前往線材設定編輯你的預設設定。\n" -" 請注意，噴嘴溫度、熱床溫度和最大體積速度對列印品質有重大影響，請小心設置。" - -msgid "\n" -"\n" -"Orca has detected that your user presets synchronization function is not enabled, which may result in unsuccessful Filament settings on the Device page. \n" -"Click \"Sync user presets\" to enable the synchronization function." -msgstr "\n" -"\n" -"Orca 偵測到你的使用者預設設定同步功能未啟用，這可能會導致設備頁面上的線材設定無法成功。請點擊「同步使用者預設設定」以啟用同步功能。" - -msgid "Printer Setting" -msgstr "列印設備設定" - -msgid "Printer config bundle(.orca_printer)" -msgstr "列印機配置包 (.orca_printer)" - -msgid "Filament bundle(.orca_filament)" -msgstr "線材包 (.orca_filament)" - -msgid "Printer presets(.zip)" -msgstr "列印設備預設設定檔 (.zip)" - -msgid "Filament presets(.zip)" -msgstr "線材預設設定檔 (.zip)" - -msgid "Process presets(.zip)" -msgstr "處理預設設定檔 (.zip)" - -msgid "initialize fail" -msgstr "初始化失敗" - -msgid "add file fail" -msgstr "添加檔案失敗。" - -msgid "add bundle structure file fail" -msgstr "添加捆綁結構檔案失敗" - -msgid "finalize fail" -msgstr "失敗" - -msgid "open zip written fail" -msgstr "打開 zip 檔案失敗" - -msgid "Export successful" -msgstr "匯出成功" - -#, c-format, boost-format -msgid "The '%s' folder already exists in the current directory. Do you want to clear it and rebuild it.\n" -"If not, a time suffix will be added, and you can modify the name after creation." -msgstr "目前目錄中已存在 '%s' 資料夾。你是否要清除它並重新建立？\n" -"如果不想清除，將會加上時間後綴，並且你可以在建立後修改名稱。" - -msgid "Printer and all the filament&&process presets that belongs to the printer. \n" -"Can be shared with others." -msgstr "列印設備及所有屬於該列印設備的線材和處理預設設定。 \n" -"可以與他人分享。" - -msgid "User's filament preset set. \n" -"Can be shared with others." -msgstr "使用者的線材預設設定。 \n" -"可以與他人分享。" - -msgid "Only display printer names with changes to printer, filament, and process presets." -msgstr "僅顯示對列印設備、線材和處理預設設定有變更的列印設備名稱。" - -msgid "Only display the filament names with changes to filament presets." -msgstr "僅顯示對線材預設設定有變更的線材名稱。" - -msgid "Only printer names with user printer presets will be displayed, and each preset you choose will be exported as a zip." -msgstr "只有具有使用者列印設備預設設定的列印設備名稱會顯示，你選擇的每個預設設定將以 zip 檔案格式匯出。" - -msgid "Only the filament names with user filament presets will be displayed, \n" -"and all user filament presets in each filament name you select will be exported as a zip." -msgstr "只有具有使用者線材預設設定的線材名稱會顯示，\n" -"你選擇的每個線材名稱中的所有使用者線材預設設定將以 zip 檔案格式匯出。" - -msgid "Only printer names with changed process presets will be displayed, \n" -"and all user process presets in each printer name you select will be exported as a zip." -msgstr "只有具有變更過處理預設設定的列印設備名稱會顯示，\n" -"你選擇的每個列印設備名稱中的所有使用者處理預設設定將以 zip 檔案格式匯出。" - -msgid "Please select at least one printer or filament." -msgstr "請至少選擇一個列印設備或線材。" - -msgid "Please select a type you want to export" -msgstr "請選擇你要匯出的類型" - -msgid "Failed to create temporary folder, please try Export Configs again." -msgstr "創建臨時資料夾失敗，請再次嘗試匯出配置。" - -msgid "Edit Filament" -msgstr "編輯線材" - -msgid "Filament presets under this filament" -msgstr "此線材下的線材預設設定" - -msgid "Note: If the only preset under this filament is deleted, the filament will be deleted after exiting the dialog." -msgstr "注意：如果此線材下的唯一預設設定被刪除，退出對話框後該線材將被刪除。" - -msgid "Presets inherited by other presets can not be deleted" -msgstr "被其他預設設定繼承的預設設定無法刪除" - -msgid "The following presets inherits this preset." -msgid_plural "The following preset inherits this preset." -msgstr[0] "" - -msgid "Delete Preset" -msgstr "刪除預設設定" - -msgid "Are you sure to delete the selected preset?" -msgstr "確定要刪除選定的預設設定嗎？" - -msgid "Delete preset" -msgstr "刪除預設設定" - -msgid "+ Add Preset" -msgstr "+ 新增預設設定" - -msgid "Delete Filament" -msgstr "刪除線材" - -msgid "All the filament presets belong to this filament would be deleted. \n" -"If you are using this filament on your printer, please reset the filament information for that slot." -msgstr "所有屬於此線材的預設設定將被刪除。\n" -"如果你正在列印設備上使用此線材，請重新設置該插槽的線材資訊。" - -msgid "Delete filament" -msgstr "刪除線材" - -msgid "Add Preset" -msgstr "新增預設設定" - -msgid "Add preset for new printer" -msgstr "為新列印設備新增預設設定" - -msgid "Copy preset from filament" -msgstr "從線材複製預設設定" - -msgid "The filament choice not find filament preset, please reselect it" -msgstr "未找到該線材的預設設定，請重新選擇。" - -msgid "[Delete Required]" -msgstr "" - -msgid "Edit Preset" -msgstr "編輯預設設定" - -msgid "For more information, please check out Wiki" -msgstr "如需更多資訊，請查看 Wiki。" - -msgid "Collapse" -msgstr "摺疊" - -msgid "Daily Tips" -msgstr "每日提示" - -#, c-format, boost-format -msgid "nozzle memorized: %.1f %s" -msgstr "記錄的噴嘴：%.1f %s" - -msgid "Your nozzle diameter in preset is not consistent with memorized nozzle diameter. Did you change your nozzle lately?" -msgstr "預設的噴嘴直徑與記錄的噴嘴直徑不一致。你最近有更換噴嘴嗎？" - -#, c-format, boost-format -msgid "*Printing %s material with %s may cause nozzle damage" -msgstr "*使用 %s 材料和 %s 列印可能會導致噴嘴損壞。" - -#, fuzzy -msgid "Need select printer" -msgstr "需要選擇列印設備" - -msgid "The start, end or step is not valid value." -msgstr "開始、結束或步距不是有效值。" - -msgid "Unable to calibrate: maybe because the set calibration value range is too large, or the step is too small" -msgstr "無法校準：可能是設定的校準值範圍太大，或步距太小" - -#, fuzzy -msgid "Physical Printer" -msgstr "實體列印設備" - -msgid "Print Host upload" -msgstr "列印主機上傳" - -msgid "Could not get a valid Printer Host reference" -msgstr "無法獲得有效的列印設備主機參考資料" - -msgid "Success!" -msgstr "成功！" - -msgid "Are you sure to log out?" -msgstr "確定要登出嗎？" - -#, fuzzy -msgid "Refresh Printers" -msgstr "重新整理列印設備" - -msgid "View print host webui in Device tab" -msgstr "在設備選項卡中查看列印主機的 Web UI" - -msgid "Replace the BambuLab's device tab with print host webui" -msgstr "將 BambuLab 的設備選項卡替換為列印主機的 Web UI" - -msgid "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-signed certificate." -msgstr "HTTPS CA 憑證檔案是可選的。 僅當你使用具有自行簽證的 HTTPS 時才需要它。" - -msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" -msgstr "憑證檔（*.crt, *.pem）|*.crt;*.pem|All files|*.*" - -msgid "Open CA certificate file" -msgstr "開啟 CA憑證檔" - -#, c-format, boost-format -msgid "On this system, %s uses HTTPS certificates from the system Certificate Store or Keychain." -msgstr "在此系統上，%s 使用系統憑證儲存庫或鑰匙圈中的 HTTPS 憑證。" - -msgid "To use a custom CA file, please import your CA file into Certificate Store / Keychain." -msgstr "若要使用自訂 CA 憑證檔，請將你的 CA 憑證檔匯入到憑證儲存庫/鑰匙圈中。" - -msgid "Login/Test" -msgstr "登入/測試" - -msgid "Connection to printers connected via the print host failed." -msgstr "經由列印主機連接的列印設備連接失敗。" - -#, c-format, boost-format -msgid "Mismatched type of print host: %s" -msgstr "列印主機類型不符：%s" - -msgid "Connection to AstroBox works correctly." -msgstr "與 AstroBox 的連接工作正常。" - -msgid "Could not connect to AstroBox" -msgstr "無法連接到 AstroBox" - -msgid "Note: AstroBox version at least 1.1.0 is required." -msgstr "注意：AstroBox 版本至少需要 1.1.0。" - -msgid "Connection to Duet works correctly." -msgstr "與 Duet 的連接工作正常。" - -msgid "Could not connect to Duet" -msgstr "無法連接到 Duet" - -msgid "Unknown error occurred" -msgstr "發生未知的錯誤" - -msgid "Wrong password" -msgstr "密碼錯誤" - -msgid "Could not get resources to create a new connection" -msgstr "無法取得建立新連結的資源" - -msgid "Upload not enabled on FlashAir card." -msgstr "FlashAir 卡上未啟用上傳。" - -msgid "Connection to FlashAir works correctly and upload is enabled." -msgstr "與 FlashAir 的連接工作正常並啟用上傳。" - -msgid "Could not connect to FlashAir" -msgstr "無法連接到 FlashAir" - -msgid "Note: FlashAir with firmware 2.00.02 or newer and activated upload function is required." -msgstr "注意：FlashAir 需要韌體為 2.00.02 或更新版本並啟動上傳功能。" - -msgid "Connection to MKS works correctly." -msgstr "成功連接到 MKS。" - -msgid "Could not connect to MKS" -msgstr "無法連接到 MKS" - -msgid "Connection to OctoPrint works correctly." -msgstr "與 OctoPrint 的連接工作正常。" - -msgid "Could not connect to OctoPrint" -msgstr "無法連接到 OctoPrint" - -msgid "Note: OctoPrint version at least 1.1.0 is required." -msgstr "注意：OctoPrint 版本至少需要 1.1.0。" - -msgid "Connection to Prusa SL1 / SL1S works correctly." -msgstr "與 Prusa SL1 / SL1S 的連接工作正常。" - -msgid "Could not connect to Prusa SLA" -msgstr "無法連接到 Prusa SLA" - -msgid "Connection to PrusaLink works correctly." -msgstr "與 PrusaLink 的連接工作正常。" - -msgid "Could not connect to PrusaLink" -msgstr "無法連接到 PrusaLink" - -msgid "Storages found" -msgstr "找到存儲空間" - -#. TRN %1% = storage path -#, boost-format -msgid "%1% : read only" -msgstr "%1% : 唯讀" - -#. TRN %1% = storage path -#, boost-format -msgid "%1% : no free space" -msgstr "%1%：沒有可用空間" - -#. TRN %1% = host -#, boost-format -msgid "Upload has failed. There is no suitable storage found at %1%." -msgstr "上傳失敗。未找到適當的存儲位置在 %1%。" - -msgid "Connection to Prusa Connect works correctly." -msgstr "成功連接到 Prusa Connect。" - -msgid "Could not connect to Prusa Connect" -msgstr "無法連接到 Prusa Connect。" - -msgid "Connection to Repetier works correctly." -msgstr "與 Repetier 的連接工作正常。" - -msgid "Could not connect to Repetier" -msgstr "無法連接到 Repetier" - -msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "注意：Repetier 版本至少需要 0.90.0。" - -#, boost-format -msgid "HTTP status: %1%\n" -"Message body: \"%2%\"" -msgstr "HTTP 狀態：%1%\n" -"訊息內容：\"%2%\"" - -#, boost-format -msgid "Parsing of host response failed.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" -msgstr "主機溝通解析失敗。\n" -"訊息內容：\"%1%\"\n" -"錯誤碼：\"%2%\"" - -#, boost-format -msgid "Enumeration of host printers failed.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" -msgstr "主機列印設備例舉失敗。\n" -"訊息內容：\"%1%\"\n" -"錯誤碼：\"%2%\"" - -msgid "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases." -msgstr "它具有較小的層高，產生幾乎可以忽略不計的層線並具有較高的列印品質。適用於大多數一般的列印情況。" - -msgid "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time." -msgstr "與 0.2 毫米噴嘴的預設配置相比，該配置具有較低的速度和加速度，且稀疏填充圖案為 Gyroid。因此，列印品質大幅提高，但列印時間大幅延長。" - -msgid "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time." -msgstr "與 0.2 毫米噴嘴的預設配置相比，該配置具有略大的層高，產生幾乎可以忽略不計的層線，並略微縮短列印時間。" - -msgid "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time." -msgstr "與 0.2 毫米噴嘴的預設配置相比，該配置具有較大的層高，產生略微可見的層線，但列印時間較短。" - -msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time." -msgstr "與 0.2 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生幾乎不可見的層線並提高列印品質，但列印時間較短。" - -msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time." -msgstr "與 0.2 毫米噴嘴的預設配置相比，該配置具有較小的層線、較低的速度和加速度，且稀疏填充圖案為 Gyroid。因此，產生幾乎不可見的層線並大幅提高列印品質，但列印時間會大大延長。" - -msgid "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time." -msgstr "與 0.2 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生最小的層線並提高列印品質，但列印時間較短。" - -msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time." -msgstr "與 0.2 毫米噴嘴的預設配置相比，該配置具有較小的層線、較低的速度和加速度，且稀疏填充圖案為 Gyroid。因此，產生最小的層線並大幅提高列印品質，但列印時間會大大延長。" - -msgid "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases." -msgstr "它具有一般的層高，產生一般的層線和列印品質。適用於大多數一般的列印情況。" - -msgid "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time." -msgstr "與 0.4 毫米噴嘴的預設配置相比，該配置具有更多的牆壁圈層和較高的稀疏填充密度。因此，列印物品的強度更高，但會增加耗材使用量並延長列印時間。" - -msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time." -msgstr "與 0.4 毫米噴嘴的預設配置相比，該配置具有較大的層高，產生更明顯的層線並降低列印品質，但列印時間略微縮短。" - -msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time." -msgstr "與 0.4 毫米噴嘴的預設配置相比，該配置具有較大的層高，產生更明顯的層線並降低列印品質，但列印時間較短。" - -msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time." -msgstr "與 0.4 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生較不明顯的層線並提高列印品質，但列印時間較長。" - -msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time." -msgstr "與 0.4 毫米噴嘴的預設配置相比，該配置具有較小的層高、較低的速度和加速度，且稀疏填充圖案為 Gyroid。因此，產生較不明顯的層線，並且列印品質大幅提高，但列印時間會大大延長。" - -msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time." -msgstr "與 0.4 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生幾乎可以忽略不計的層線，並提高列印品質，但列印時間較長。" - -msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time." -msgstr "與 0.4 毫米噴嘴的預設配置相比，該配置具有較小的層高、較低的速度和加速度，且稀疏填充圖案為 Gyroid。因此，產生幾乎可以忽略不計的層線，並且列印品質大幅提高，但列印時間會大大延長。" - -msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time." -msgstr "與 0.4 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生幾乎可以忽略不計的層線，但列印時間較長。" - -msgid "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time." -msgstr "它具有較大的層高，產生明顯的層線，並且列印品質和列印時間屬於普通水平。" - -msgid "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time." -msgstr "與 0.6 毫米噴嘴的預設配置相比，該配置具有更多的牆壁圈層和較高的稀疏填充密度。因此，列印物品的強度更高，但會增加耗材使用量並延長列印時間。" - -msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases." -msgstr "與 0.6 毫米噴嘴的預設配置相比，該配置具有較大的層高，產生較為明顯的層線並降低列印品質，但在某些情況下會縮短列印時間。" - -msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases." -msgstr "與 0.6 毫米噴嘴的預設配置相比，該配置具有較大的層高，產生更明顯的層線並顯著降低列印品質，但在某些情況下會縮短列印時間。" - -msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time." -msgstr "與 0.6 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生較不明顯的層線並略微提高列印品質，但列印時間較長。" - -msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time." -msgstr "與 0.6 毫米噴嘴的預設配置相比，該配置具有較小的層高，產生較不明顯的層線並提高列印品質，但列印時間較長。" - -msgid "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time." -msgstr "它具有非常大的層高，產生明顯的層線、較低的列印品質和一般的列印時間。" - -msgid "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases." -msgstr "與0.8mm噴嘴的預設配置相比，該配置具有較大的層高，產生非常明顯的層線並顯著降低列印品質，但在某些情況下會縮短列印時間。" - -msgid "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases." -msgstr "與0.8mm噴嘴的預設配置相比，該配置具有更大的層高，產生極為明顯的層線並顯著降低列印品質，但在某些情況下會大幅縮短列印時間。" - -msgid "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases." -msgstr "與0.8mm噴嘴的預設配置相比，該配置具有略小的層高，產生略少但仍明顯的層線，並略微提高列印品質，但在某些情況下會延長列印時間。" - -msgid "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases." -msgstr "與0.8mm噴嘴的預設配置相比，該配置具有較小的層高，從而產生較少但仍明顯的層線，並略微提高列印品質，但在某些情況下會延長列印時間。" - -msgid "Connected to Obico successfully!" -msgstr "成功連接到 Obico！" - -msgid "Could not connect to Obico" -msgstr "無法連接到 Obico" - -msgid "Connected to SimplyPrint successfully!" -msgstr "成功連接到 SimplyPrint！" - -msgid "Could not connect to SimplyPrint" -msgstr "無法連接到 SimplyPrint" - -msgid "Internal error" -msgstr "內部錯誤" - -msgid "Unknown error" -msgstr "未知錯誤" - -msgid "SimplyPrint account not linked. Go to Connect options to set it up." -msgstr "SimplyPrint 帳戶未連結。請前往連接選項進行設置。" - -msgid "Connection to Flashforge works correctly." -msgstr "成功連接到 Flashforge" - -msgid "Could not connect to Flashforge" -msgstr "無法連接到 Flashforge" - -msgid "The provided state is not correct." -msgstr "提供的狀態不正確。" - -msgid "Please give the required permissions when authorizing this application." -msgstr "授權此應用程式時，請提供所需的權限。" - -msgid "Something unexpected happened when trying to log in, please try again." -msgstr "嘗試登入時發生了意外錯誤，請再試一次。" - -msgid "User cancelled." -msgstr "使用者取消" - -#: resources/data/hints.ini: [hint:Precise wall] -msgid "Precise wall\n" -"Did you know that turning on precise wall can improve precision and layer consistency?" -msgstr "精確牆壁\n" -"你知道啟用精確牆壁可以提高精度和層次一致性嗎？" - -#: resources/data/hints.ini: [hint:Sandwich mode] -msgid "Sandwich mode\n" -"Did you know that you can use sandwich mode (inner-outer-inner) to improve precision and layer consistency if your model doesn't have very steep overhangs?" -msgstr "" - -#: resources/data/hints.ini: [hint:Chamber temperature] -msgid "Chamber temperature\n" -"Did you know that OrcaSlicer supports chamber temperature?" -msgstr "機箱溫度\n" -"你知道 OrcaSlicer 支援機箱內溫度控制嗎？" - -#: resources/data/hints.ini: [hint:Calibration] -msgid "Calibration\n" -"Did you know that calibrating your printer can do wonders? Check out our beloved calibration solution in OrcaSlicer." -msgstr "校準\n" -"你知道校準列印設備可以帶來奇效嗎？快來看看我們在 OrcaSlicer 中的校準解決方案。" - -#: resources/data/hints.ini: [hint:Auxiliary fan] -msgid "Auxiliary fan\n" -"Did you know that OrcaSlicer supports Auxiliary part cooling fan?" -msgstr "輔助風扇\n" -"你知道 OrcaSlicer 支援輔助零件冷卻風扇嗎？" - -#: resources/data/hints.ini: [hint:Air filtration] -msgid "Air filtration/Exhaust Fan\n" -"Did you know that OrcaSlicer can support Air filtration/Exhaust Fan?" -msgstr "空氣過濾/排風扇\n" -"你知道 OrcaSlicer 支援空氣過濾/排風扇嗎？" - -#: resources/data/hints.ini: [hint:G-code window] -msgid "G-code window\n" -"You can turn on/off the G-code window by pressing the C key." -msgstr "G-code 視窗\n" -"你可以按 C 鍵開啟/關閉 G-code 視窗。" - -#: resources/data/hints.ini: [hint:Switch workspaces] -msgid "Switch workspaces\n" -"You can switch between Prepare and Preview workspaces by pressing the Tab key." -msgstr "切換工作區\n" -"你可以按 Tab 鍵在 準備 和 預覽 工作區之間切換。" - -#: resources/data/hints.ini: [hint:How to use keyboard shortcuts] -msgid "How to use keyboard shortcuts\n" -"Did you know that Orca Slicer offers a wide range of keyboard shortcuts and 3D scene operations." -msgstr "如何使用鍵盤快捷鍵\n" -"你知道 Orca Slicer 提供了廣泛的鍵盤快捷鍵和 3D 場景操作嗎？" - -#: resources/data/hints.ini: [hint:Reverse on odd] -msgid "Reverse on odd\n" -"Did you know that Reverse on odd feature can significantly improve the surface quality of your overhangs?" -msgstr "奇數反向\n" -"你知道 奇數反向 功能可以顯著改善懸垂部分的表面品質嗎？" - -#: resources/data/hints.ini: [hint:Cut Tool] -msgid "Cut Tool\n" -"Did you know that you can cut a model at any angle and position with the cutting tool?" -msgstr "切割工具\n" -"你知道嗎？你可以使用切割工具以任何角度和位置切割模型。" - -#: resources/data/hints.ini: [hint:Fix Model] -msgid "Fix Model\n" -"Did you know that you can fix a corrupted 3D model to avoid a lot of slicing problems on the Windows system?" -msgstr "修復模型\n" -"你知道可以修復損壞的 3D 模型，以避免在 Windows 系統上出現大量切片問題嗎？" - -#: resources/data/hints.ini: [hint:Timelapse] -msgid "Timelapse\n" -"Did you know that you can generate a timelapse video during each print?" -msgstr "縮時錄影\n" -"你知道嗎？你可以每次列印時產生一段縮時錄影。" - -#: resources/data/hints.ini: [hint:Auto-Arrange] -msgid "Auto-Arrange\n" -"Did you know that you can auto-arrange all objects in your project?" -msgstr "自動擺放\n" -"你知道嗎？你可以自動擺放專案項目中的所有物件。" - -#: resources/data/hints.ini: [hint:Auto-Orient] -msgid "Auto-Orient\n" -"Did you know that you can rotate objects to an optimal orientation for printing by a simple click?" -msgstr "自動定向\n" -"你知道嗎，你只需單擊滑鼠，即可將物件旋轉到適合的列印方向。" - -#: resources/data/hints.ini: [hint:Lay on Face] -msgid "Lay on Face\n" -"Did you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the \"Place on face\" function or press the F key." -msgstr "指定列印物件底部\n" -"你知道嗎，你可以快速指定模型的底面，使其位於列印板上。選擇 \"選擇底面\" 功能或按F鍵。" - -#: resources/data/hints.ini: [hint:Object List] -msgid "Object List\n" -"Did you know that you can view all objects/parts in a list and change settings for each object/part?" -msgstr "物件清單\n" -"你知道物件清單嗎？你可以在其中的查看所有物件/零件，並更改每個物件/零件的設定。" - -#: resources/data/hints.ini: [hint:Search Functionality] -msgid "Search Functionality\n" -"Did you know that you use the Search tool to quickly find a specific Orca Slicer setting?" -msgstr "搜尋功能\n" -"你知道可以使用搜尋工具快速找到特定的設定嗎？" - -#: resources/data/hints.ini: [hint:Simplify Model] -msgid "Simplify Model\n" -"Did you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model." -msgstr "簡化模型\n" -"你知道可以使用簡化網格功能來減少網格中的三角形數量嗎？右鍵點擊模型並選擇簡化模型。" - -#: resources/data/hints.ini: [hint:Slicing Parameter Table] -msgid "Slicing Parameter Table\n" -"Did you know that you can view all objects/parts on a table and change settings for each object/part?" -msgstr "參數表格\n" -"你知道嗎？你可以看參數表格上的所有物件/零件，並更改每個物件/零件的設定。" - -#: resources/data/hints.ini: [hint:Split to Objects/Parts] -msgid "Split to Objects/Parts\n" -"Did you know that you can split a big object into small ones for easy colorizing or printing?" -msgstr "分割成物件/零件\n" -"你知道嗎，你可以把一個大物件分割成多個小物件/零件以便著色或列印。" - -#: resources/data/hints.ini: [hint:Subtract a Part] -msgid "Subtract a Part\n" -"Did you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in Orca Slicer." -msgstr "減去零件\n" -"你知道可以使用負零件修飾器從一個網格中減去另一個網格嗎？這樣，你可以在 Orca Slicer 中輕鬆創建可調整大小的孔洞。" - -#: resources/data/hints.ini: [hint:STEP] -msgid "STEP\n" -"Did you know that you can improve your print quality by slicing a STEP file instead of an STL?\n" -"Orca Slicer supports slicing STEP files, providing smoother results than a lower resolution STL. Give it a try!" -msgstr "STEP檔案\n" -"你知道嗎，通過切片 STEP 檔案而不是 STL 檔案可以提高列印品質。\n" -" Orca Slicer 支援切片 STEP 檔案，提供比低解析度 STL 更平滑的結果。試試看！" - -#: resources/data/hints.ini: [hint:Z seam location] -msgid "Z seam location\n" -"Did you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!" -msgstr "Z接縫位置\n" -"你知道嗎，你可以自訂Z接縫的位置，甚至可以將其繪製在列印上，使其位於不太可見的位置。這樣可以改善模型的整體外觀。試試看！" - -#: resources/data/hints.ini: [hint:Fine-tuning for flow rate] -msgid "Fine-tuning for flow rate\n" -"Did you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning." -msgstr "流量微調\n" -"你知道嗎，你可以微調流量，以獲得更好看的列印效果。根據線材的不同，可以通過進行一些微調來提高列印模型的整體光潔度。" - -#: resources/data/hints.ini: [hint:Split your prints into plates] -msgid "Split your prints into plates\n" -"Did you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts." -msgstr "分類列印\n" -"你知道嗎，你可以把一個有很多零件的模型安排到多個獨立的列印板，然後列印出來，這將簡化對所有零件的管理。" - -#: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer -#: Height] -msgid "Speed up your print with Adaptive Layer Height\n" -"Did you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!" -msgstr "自適應層高度加速列印\n" -"你知道嗎，你可以使用\"自適應層高度\"選項可以更快地列印模型。試試看！" - -#: resources/data/hints.ini: [hint:Support painting] -msgid "Support painting\n" -"Did you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it." -msgstr "自訂支撐\n" -"你知道嗎，你可以手動繪製增加/隱藏支撐的位置，此功能使僅將支撐材料放置在實際需要的模型截面上變得容易。" - -#: resources/data/hints.ini: [hint:Different types of supports] -msgid "Different types of supports\n" -"Did you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!" -msgstr "支撐類型\n" -"你知道嗎，有多種可選的支撐類型，樹狀支撐非常適合人物/動物模型，同時可以節線材並提高列印速度。試試看！" - -#: resources/data/hints.ini: [hint:Printing Silk Filament] -msgid "Printing Silk Filament\n" -"Did you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results." -msgstr "列印絲綢線材\n" -"你知道嗎，絲綢線材需要特別考慮才能成功列印。為了獲得最佳效果，通常建議使用較高的溫度和較低的速度。" - -#: resources/data/hints.ini: [hint:Brim for better adhesion] -msgid "Brim for better adhesion\n" -"Did you know that when printing models have a small contact interface with the printing surface, it's recommended to use a brim?" -msgstr "使用 Brim（裙邊）\n" -"你知道嗎？當模型與熱床表面的接觸面積較小時，建議使用 brim（裙邊）以提高列印成功率。" - -#: resources/data/hints.ini: [hint:Set parameters for multiple objects] -msgid "Set parameters for multiple objects\n" -"Did you know that you can set slicing parameters for all selected objects at one time?" -msgstr "為多個物件設定參數\n" -"你知道嗎，你可以同時為所有選取的物件設定切片參數。" - -#: resources/data/hints.ini: [hint:Stack objects] -msgid "Stack objects\n" -"Did you know that you can stack objects as a whole one?" -msgstr "組合物體\n" -"你知道嗎？你可以把多個物件組合為一個整體。" - -#: resources/data/hints.ini: [hint:Flush into support/objects/infill] -msgid "Flush into support/objects/infill\n" -"Did you know that you can save the wasted filament by flushing them into support/objects/infill during filament change?" -msgstr "廢料運用到支撐/物件/填充中\n" -"你知道嗎？你可以在換料時將廢料運用到支撐/物件/填充，以節省浪費的線材。" - -#: resources/data/hints.ini: [hint:Improve strength] -msgid "Improve strength\n" -"Did you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?" -msgstr "提高強度\n" -"你知道嗎？你可以使用更多的牆層數和更高的疏散填充密度來提高模型的強度。" - -#: resources/data/hints.ini: [hint:When need to print with the printer door -#: opened] -msgid "When need to print with the printer door opened\n" -"Did you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature. More info about this in the Wiki." -msgstr "需要在開啟列印設備門的情況下列印\n" -"你知道當列印低溫耗材且機身溫度較高時，開啟列印設備門可以減少擠出機/熱端堵塞的機率嗎？更多資訊請參閱Wiki。" - -#: resources/data/hints.ini: [hint:Avoid warping] -msgid "Avoid warping\n" -"Did you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping." -msgstr "避免翹曲\n" -"你知道當列印容易翹曲的材料（如 ABS）時，適當提高熱床溫度可以降低翹曲的機率嗎？" - -#~ msgid "Text contains character glyph (represented by '?') unknown by font." -#~ msgstr "文字包含字型無法識別的字形（以 '?' 表示）。" - -#~ msgid "ShiftLeft mouse button" -#~ msgstr "Shift左滑鼠" -#~ msgctxt "Verb" - -#~ msgid "Scale" -#~ msgstr "縮放" - -#~ msgid "Orca Slicer " -#~ msgstr "Orca Slicer " - -#~ msgid "" -#~ "）to locate the toolhead's position. This prevents device moving beyond " -#~ "the printable boundary and causing equipment wear." -#~ msgstr "）來定位目前工具頭位置，以防止移動時超出邊界造成設備損壞" - -#~ msgid "" -#~ "Diameter of the print bed. It is assumed that origin (0,0) is located in " -#~ "the center." -#~ msgstr "熱床直徑。假定原點（0,0）位於中心。" - -#~ msgid "" -#~ "The current chamber temperature or the target chamber temperature exceeds " -#~ "45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" -#~ "TPU) is not allowed to be loaded." -#~ msgstr "" -#~ "目前設備內部溫度超過 45℃。為避免阻塞，不允許進料低溫線材（PLA / PETG / " -#~ "TPU）。" - -#~ msgid "" -#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order " -#~ "to avoid extruder clogging,it is not allowed to set the chamber " -#~ "temperature above 45℃." -#~ msgstr "" -#~ "為避免堵塞，使用低溫線材（PLA / PETG / TPU）時，不充許將設備內部溫度設置於" -#~ "45℃以上" - -#, fuzzy, c-format, boost-format -#~ msgid "" -#~ "Successfully unmounted. The device %s(%s) can now be safely removed from " -#~ "the computer." -#~ msgstr "卸載成功。設備 %s（%s）現在可能安全地從電腦移除。" - -#, c-format, boost-format -#~ msgid "Ejecting of device %s(%s) has failed." -#~ msgstr "退出設備 %s（%s）失敗。" - -#~ msgid "" -#~ "\"Fix Model\" feature is currently only on Windows. Please repair the " -#~ "model on Orca Slicer(windows) or CAD softwares." -#~ msgstr "" -#~ "\"修復模型\"功能目前僅適用於 Windows 系統。請在 Windows 版本的 Orca " -#~ "slicer 或 CAD 軟體上修復模型。" - -#, c-format, boost-format -#~ msgid "" -#~ "The selected printer (%s) is incompatible with the chosen printer profile " -#~ "in the slicer (%s)." -#~ msgstr "以選的機臺(%s)與切片軟體內所選的機臺預設(%s)不相容" - -#~ msgid "Cool plate" -#~ msgstr "低溫列印板" - -#~ msgid "Lift Z Enforcement" -#~ msgstr "強化抬Z策略" - -#~ msgid "Flushing volume (mm³) for each filament pair." -#~ msgstr "在兩個線材間切換所需的廢料體積（mm³）" - -#, c-format, boost-format -#~ msgid "A new Network plug-in(%s) available, Do you want to install it?" -#~ msgstr "新版的網路插件（ %s）可用，是否要安裝？" - -#~ msgid "" -#~ "Maximum detour distance for avoiding crossing wall. Don't detour if the " -#~ "detour distance is large than this value. Detour length could be " -#~ "specified either as an absolute value or as percentage (for example 50%) " -#~ "of a direct travel path. Zero to disable" -#~ msgstr "" -#~ "避免跨越外牆時的最大繞行距離。如果繞行距離大於該數值，則不繞行。繞行距離可" -#~ "為絕對值或直線路徑的百分比（例如 50%）。0 表示禁用" - -#~ msgid "" -#~ "This separate setting will affect the speed of perimeters having radius " -#~ "<= small_perimeter_threshold (usually holes). If expressed as percentage " -#~ "(for example: 80%) it will be calculated on the outer wall speed setting " -#~ "above. Set to zero for auto." -#~ msgstr "" -#~ "這個單獨的設定將影響半徑 <= small_perimeter_threshold（通常是圓孔）的周長" -#~ "的速度。 如果以百分比表示（例如：80%），它將根據上面的外牆速度設定進行計" -#~ "算。 自動設定為零。" - -#, fuzzy -#~ msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)" -#~ msgstr "壓力提前（Klipper）或者線性提前（Marlin）" - -#~ msgid "" -#~ "If enabled, this setting will ensure external perimeters are not slowed " -#~ "down to meet the minimum layer time. This is particularly helpful in the " -#~ "below scenarios:\n" -#~ "\n" -#~ " 1. To avoid changes in shine when printing glossy filaments \n" -#~ "2. To avoid changes in external wall speed which may create slight wall " -#~ "artifacts that appear like z banding \n" -#~ "3. To avoid printing at speeds which cause VFAs (fine artifacts) on the " -#~ "external walls\n" -#~ "\n" -#~ msgstr "" -#~ "如果啟用，這個設定將確保外圍輪廓不會因為達到最小層時間而減慢速度。這在以下" -#~ "情境中特別有幫助：\n" -#~ "\n" -#~ " 1. 避免在列印光面材料時發生光澤變化\n" -#~ " 2. 避免外牆速度變化，這可能會產生類似Z帶紋的牆面瑕疵\n" -#~ " 3. 避免以會在外牆上造成細微瑕疵（細節瑕疵，VFA）速度列印\n" -#~ "\n" - -#~ msgid "" -#~ "Connect an infill line to an internal perimeter with a short segment of " -#~ "an additional perimeter. If expressed as percentage (example: 15%) it is " -#~ "calculated over infill extrusion width. Orca Slicer tries to connect two " -#~ "close infill lines to a short perimeter segment. If no such perimeter " -#~ "segment shorter than infill_anchor_max is found, the infill line is " -#~ "connected to a perimeter segment at just one side and the length of the " -#~ "perimeter segment taken is limited to this parameter, but no longer than " -#~ "anchor_length_max. \n" -#~ "Set this parameter to zero to disable anchoring perimeters connected to a " -#~ "single infill line." -#~ msgstr "" -#~ "將內填充線連接到內牆邊緣，並使用一小段額外的邊緣。如果以百分比表示（例如：" -#~ "15%），則是基於內填充擠出寬度來計算。Orca Slicer 會嘗試將兩條相近的內填充" -#~ "線連接到一段短邊緣。如果找不到小於 infill_anchor_max 的邊緣段，則內填充線" -#~ "將只連接到一側的邊緣段，且所選的邊緣段長度會限制在此參數範圍內，但不超過" -#~ "\"錨點長度\"最大值。若將此參數設為零，則會禁用連接到單一內填充線的錨固邊" -#~ "緣。" - -#~ msgid "" -#~ "Connect an infill line to an internal perimeter with a short segment of " -#~ "an additional perimeter. If expressed as percentage (example: 15%) it is " -#~ "calculated over infill extrusion width. Orca Slicer tries to connect two " -#~ "close infill lines to a short perimeter segment. If no such perimeter " -#~ "segment shorter than this parameter is found, the infill line is " -#~ "connected to a perimeter segment at just one side and the length of the " -#~ "perimeter segment taken is limited to infill_anchor, but no longer than " -#~ "this parameter. \n" -#~ "If set to 0, the old algorithm for infill connection will be used, it " -#~ "should create the same result as with 1000 & 0." -#~ msgstr "" -#~ "將內填充線連接到內牆邊緣，並使用一小段額外的邊緣。如果以百分比表示（例如：" -#~ "15%），則是基於內填充擠出寬度來計算。Orca Slicer 會嘗試將兩條相近的內填充" -#~ "線連接到一段短邊緣。如果找不到小於此參數的邊緣段，則內填充線將只連接到一側" -#~ "的邊緣段，且所選的邊緣段長度會限制於infill_anchor，但不會超過此參數。\n" -#~ "如果設為0，則會使用舊的內填充連接算法，這應該會產生與設為 1000 和 0 相同的" -#~ "結果。" - -#~ msgid "" -#~ "Enable this to add line number(Nx) at the beginning of each G-Code line" -#~ msgstr "打開這個設定，G-code 的每一行的開頭會增加Nx標註行號。" - -#~ msgid "" -#~ "This parameter smooths out sudden extrusion rate changes that happen when " -#~ "the printer transitions from printing a high flow (high speed/larger " -#~ "width) extrusion to a lower flow (lower speed/smaller width) extrusion " -#~ "and vice versa.\n" -#~ "\n" -#~ "It defines the maximum rate by which the extruded volumetric flow in mm3/" -#~ "sec can change over time. Higher values mean higher extrusion rate " -#~ "changes are allowed, resulting in faster speed transitions.\n" -#~ "\n" -#~ "A value of 0 disables the feature. \n" -#~ "\n" -#~ "For a high speed, high flow direct drive printer (like the Bambu lab or " -#~ "Voron) this value is usually not needed. However it can provide some " -#~ "marginal benefit in certain cases where feature speeds vary greatly. For " -#~ "example, when there are aggressive slowdowns due to overhangs. In these " -#~ "cases a high value of around 300-350mm3/s2 is recommended as this allows " -#~ "for just enough smoothing to assist pressure advance achieve a smoother " -#~ "flow transition.\n" -#~ "\n" -#~ "For slower printers without pressure advance, the value should be set " -#~ "much lower. A value of 10-15mm3/s2 is a good starting point for direct " -#~ "drive extruders and 5-10mm3/s2 for Bowden style. \n" -#~ "\n" -#~ "This feature is known as Pressure Equalizer in Prusa slicer.\n" -#~ "\n" -#~ "Note: this parameter disables arc fitting." -#~ msgstr "" -#~ "此參數是列印設備從列印高流量（高速/較大寬度）擠出轉換到較低流量（較低速度/" -#~ "較小寬度）擠出時，用於平滑突然變擠出速率，反之亦然。\n" -#~ "它定義了擠出體積流量（mm3/秒）隨時間變化的最大速率。數值越高意味著允許更高" -#~ "的擠出速率變化，從而實現更快的速度轉換。\n" -#~ "\n" -#~ "值為 0 會停用該功能。\n" -#~ "\n" -#~ "對於高速、高流量的機型（如 Bambu lab 或 Voron），通常不需要此設置。但是，" -#~ "在某些速度差異很大的情況下，它可以提供一些邊際效益。 例如，當出現因懸空而" -#~ "導致的劇烈減速時。在這些情況下，建議使用大約 300－350　mm3/s2，因為這樣剛" -#~ "好允許足夠的平滑，以幫助壓力提前實現更平滑的流量過渡。\n" -#~ "\n" -#~ "對於速度較慢且沒有壓力提前的機種，應將此值設置為較低。對於近程擠出機來說\n" -#~ "10－15 mm3/s2 是一個好的起點，而對於遠程擠出機來說是 5－10 mm3/s2。\n" -#~ "此功能在 Prusa 切片軟體中稱為壓力均衡器。\n" -#~ "\n" -#~ "注意：此參數會停用圓弧擬合。" - -#~ msgid "Z hop when retract" -#~ msgstr "回抽時抬升Z" - -#~ msgid "" -#~ "Enable this option to omit the custom Change filament G-code only at the " -#~ "beginning of the print. The tool change command (e.g., T0) will be " -#~ "skipped throughout the entire print. This is useful for manual multi-" -#~ "material printing, where we use M600/PAUSE to trigger the manual filament " -#~ "change action." -#~ msgstr "" -#~ "啟用此選項以僅在列印開始時省略自訂更換線材 G-code。工具更換命令（例如 T0）" -#~ "將在整個列印過程中跳過。這對於手動多線材列印很有用，我們使用 M600/PAUSE 來" -#~ "觸發手動線材更換動作。" - -#~ msgid "" -#~ "This value will be added (or subtracted) from all the Z coordinates in " -#~ "the output G-code. It is used to compensate for bad Z endstop position: " -#~ "for example, if your endstop zero actually leaves the nozzle 0.3mm far " -#~ "from the print bed, set this to -0.3 (or fix your endstop)." -#~ msgstr "" -#~ "該設定值將從輸出 G-code 中的所有 Z 座標增加（或 減少）。 它用於 Z 軸限位器" -#~ "位置的補償：例如，你的 Z 軸限位器實際上使噴嘴距離列印板高了 0.3 mm，請將其" -#~ "設定為 -0.3。" - -#~ msgid "" -#~ "normal(auto) and tree(auto) is used to generate support automatically. If " -#~ "normal(manual) or tree(manual) is selected, only support enforcers are " -#~ "generated" -#~ msgstr "" -#~ "普通（自動）和樹狀（自動）用於自動產生支撐體。如果選擇普通（手動）或樹狀" -#~ "（手動），僅會在支撐強制面上產生支撐。" - -#~ msgid "Expand (+) or shrink (-) the horizontal span of normal support" -#~ msgstr "在水平方向對普通支撐進行延伸（+）或收縮（-）" - -#~ msgid "" -#~ "For high-temperature materials like ABS, ASA, PC, and PA, a higher " -#~ "chamber temperature can help suppress or reduce warping and potentially " -#~ "lead to higher interlayer bonding strength. However, at the same time, a " -#~ "higher chamber temperature will reduce the efficiency of air filtration " -#~ "for ABS and ASA. \n" -#~ "\n" -#~ "For PLA, PETG, TPU, PVA, and other low-temperature materials, this option " -#~ "should be disabled (set to 0) as the chamber temperature should be low to " -#~ "avoid extruder clogging caused by material softening at the heat break.\n" -#~ "\n" -#~ "If enabled, this parameter also sets a gcode variable named " -#~ "chamber_temperature, which can be used to pass the desired chamber " -#~ "temperature to your print start macro, or a heat soak macro like this: " -#~ "PRINT_START (other variables）CHAMBER_TEMP=[chamber_temperature]. This " -#~ "may be useful if your printer does not support M141/M191 commands, or if " -#~ "you desire to handle heat soaking in the print start macro if no active " -#~ "chamber heater is installed." -#~ msgstr "" -#~ "對於 ABS、ASA、PC 和 PA 等高溫材料，較高的機箱溫度有助於抑制或減少翹曲，並" -#~ "可能提高層間結合強度。然而，同時，較高的機箱溫度會降低列印 ABS 和 ASA 時的" -#~ "空氣過濾效率。\n" -#~ "\n" -#~ "對於 PLA、PETG、TPU、PVA 和其他低溫材料，不應使用此選項（設置為 0），因為" -#~ "機箱溫度應較低，以避免由於材料在喉管軟化而導致擠出機堵塞。\n" -#~ "\n" -#~ "如果啟用，此參數還設置了一個名為 chamber_temperature 的 gcode 變數，可將所" -#~ "需的機箱溫度傳遞給列印巨集，例如：PRINT_START（其他變數）" -#~ "CHAMBER_TEMP=[chamber_temperature]。如果你的印表設備不支持 M141/M191 命" -#~ "令，或者你希望在沒有安裝主動機箱加熱器的情況下在列印開始巨集中處理熱浸處" -#~ "理，這可能很有用。" - -#~ msgid "" -#~ "Search for almost-circular holes that span more than one layer and " -#~ "convert the geometry to polyholes. Use the nozzle size and the (biggest)" -#~ "diameter to compute the polyhole.\n" -#~ "See http://hydraraptor.blogspot.com/2011/02/polyholes.html" -#~ msgstr "" -#~ "搜索跨越多層的近似圓形孔，並將幾何形狀轉換為多邊形孔。使用噴嘴尺寸和（最" -#~ "大）直徑來計算多邊形孔。\n" -#~ "參見http://hydraraptor.blogspot.com/2011/02/polyholes.html" - -#~ msgid "" -#~ "Width of the wall that will replace thin features (according to the " -#~ "Minimum feature size) of the model. If the Minimum wall width is thinner " -#~ "than the thickness of the feature, the wall will become as thick as the " -#~ "feature itself. It's expressed as a percentage over nozzle diameter" -#~ msgstr "" -#~ "用於替換模型細小特徵（根據最小特徵尺寸）的牆線寬。如果牆最小線寬小於最小特" -#~ "徵的厚度，則牆將變得和特徵本身一樣厚。參數值表示為相對噴嘴直徑的百分比" - -#~ msgid "" -#~ "No layers were detected. You might want to repair your STL file(s) or " -#~ "check their size or thickness and retry.\n" -#~ msgstr "" -#~ "沒有切到層次。你可能需要修復 STL 檔案，或檢查模型尺寸、厚度等，之後再重" -#~ "試。\n" - -#~ msgid "" -#~ "Unknown file format. Input file must have .stl, .obj, .amf(.xml)" -#~ "extension." -#~ msgstr "未知的檔案格式。輸入檔案的副檔名必須為 .stl、.obj 或 .amf（.xml）。" - -#~ msgid "Use forward slashes ( / ) as a directory separator if needed." -#~ msgstr "如有需要，請使用正斜槓（ / ）作為目錄分隔符號。" - -#~ msgid "" -#~ "Sandwich mode\n" -#~ "Did you know that you can use sandwich mode (inner-outer-inner) to " -#~ "improve precision and layer consistency if your model doesn't have very " -#~ "steep overhangs?" -#~ msgstr "" -#~ "三明治模式\n" -#~ "如果模型沒有非常陡峭的懸垂部分，可以使用三明治模式（內-外-內）來提高精度和" -#~ "層次一致性" - -#~ msgid "Reverse on odd" -#~ msgstr "反轉奇數層方向" - -#, no-c-format, no-boost-format -#~ msgid "" -#~ "Number of mm the overhang need to be for the reversal to be considered " -#~ "useful. Can be a % of the perimeter width.\n" -#~ "Value 0 enables reversal on every odd layers regardless." -#~ msgstr "" -#~ "判定懸空反轉需要的值（mm），可以是線寬的百分比。\n" -#~ " 0 值則會在每個奇數層上啟用反向。" - -#~ msgid "" -#~ "While printing by Object, the extruder may collide skirt.\n" -#~ "Thus, reset the skirt layer to 1 to avoid that." -#~ msgstr "逐件列印時，擠出機可能與裙邊碰撞。因此將裙邊的層數重設為 1。" - -#~ msgid "" -#~ "The geometry will be decimated before dectecting sharp angles. This " -#~ "parameter indicates the minimum length of the deviation for the " -#~ "decimation.\n" -#~ "0 to deactivate" -#~ msgstr "" -#~ "在偵測尖銳角度之前，幾何形狀將被簡化。此參數表示簡化的最小偏差長度。\n" -#~ "設為 0 以停用" - -#, fuzzy -#~ msgid "" -#~ "Start the fan this number of seconds earlier than its target start time " -#~ "(you can use fractional seconds). It assumes infinite acceleration for " -#~ "this time estimation, and will only take into account G1 and G0 moves " -#~ "(arc fitting is unsupported).\n" -#~ "It won't move fan commands from custom gcodes (they act as a sort of " -#~ "'barrier').\n" -#~ "It won't move fan comands into the start gcode if the 'only custom start " -#~ "gcode' is activated.\n" -#~ "Use 0 to deactivate." -#~ msgstr "" -#~ "將風扇啟動指令往前移動指定時間以補償風扇的啟動時間。目前支援 G1 G0 指令\n" -#~ "設為 0 以禁用此選項" - -#~ msgid "Limited" -#~ msgstr "有限" - -#~ msgid "Shrinkage" -#~ msgstr "線材收縮率" - -#, fuzzy -#~ msgid "" -#~ "Decrease this value slightly(for example 0.9) to reduce the amount of " -#~ "material for bridge, to improve sag" -#~ msgstr "稍微減小這個數值（比如 0.9）可以減小橋接的線材量，來改善下垂。" - -#, fuzzy -#~ msgid "" -#~ "This factor affects the amount of material for top solid infill. You can " -#~ "decrease it slightly to have smooth surface finish" -#~ msgstr "稍微減小這個數值（比如 0.97）可以來改善頂面的光滑程度。" - -#, fuzzy -#~ msgid "This factor affects the amount of material for bottom solid infill" -#~ msgstr "首層流量調整係數，預設為 1.0" - -#~ msgid "" -#~ "Enable this option to slow printing down in areas where potential curled " -#~ "perimeters may exist" -#~ msgstr "啟用此選項降低可能存在潛在翹邊區域的列印速度" - -#~ msgid "Speed of bridge and completely overhang wall" -#~ msgstr "橋接和完全懸空的外牆的列印速度" - -#~ msgid "" -#~ "Speed of internal bridge. If the value is expressed as a percentage, it " -#~ "will be calculated based on the bridge_speed. Default value is 150%." -#~ msgstr "" -#~ "內部橋接速度。 如果該值以百分比表示，則會根據 橋接速度 進行計算。 預設值" -#~ "為 150%" - -#~ msgid "Time to load new filament when switch filament. For statistics only" -#~ msgstr "切換線材時，進料所需的時間。只用於統計資訊。" - -#~ msgid "" -#~ "Time to unload old filament when switch filament. For statistics only" -#~ msgstr "切換線材時，退料所需時間。只用於統計資訊。" - -#~ msgid "" -#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to load a " -#~ "new filament during a tool change (when executing the T code). This time " -#~ "is added to the total print time by the G-code time estimator." -#~ msgstr "" -#~ "在換色時（執行 T-code ，如 T1，T2），列印設備韌體（或 Multi Material Unit " -#~ "2.0）載入新線材的所需時間。該時間將會被 G-code 時間評估功能加到總列印時間" -#~ "上去。" - -#~ msgid "" -#~ "Time for the printer firmware (or the Multi Material Unit 2.0) to unload " -#~ "a filament during a tool change (when executing the T code). This time is " -#~ "added to the total print time by the G-code time estimator." -#~ msgstr "" -#~ "換色期間（執行T-cide 時如 T1，T2），列印設備韌體（或 Multi Material Unit " -#~ "2.0）退出線材所需時間。該時間將會被 G-code 時間評估功能加到總列印時間上" -#~ "去。" - -#~ msgid "Filter out gaps smaller than the threshold specified" -#~ msgstr "忽略小於指定數值的間隙" - -#~ msgid "" -#~ "Enable this option for chamber temperature control. An M191 command will " -#~ "be added before \"machine_start_gcode\"\n" -#~ "G-code commands: M141/M191 S(0-255)" -#~ msgstr "" -#~ "啟用此選項以控製列印設備內部溫度。 在「machine_start_gcode」之前將會新增一" -#~ "個M191指令\n" -#~ "G碼指令：M141/M191 S（0-255）" - -#~ msgid "Wipe tower extruder" -#~ msgstr "換料塔擠出機" - -#~ msgid "Printer local connection failed, please try again." -#~ msgstr "列印設備區域網路連接失敗，請重試。" - -#~ msgid "" -#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" -#~ "\n" -#~ "Usually the calibration is unnecessary. When you start a single color/" -#~ "material print, with the \"flow dynamics calibration\" option checked in " -#~ "the print start menu, the printer will follow the old way, calibrate the " -#~ "filament before the print; When you start a multi color/material print, " -#~ "the printer will use the default compensation parameter for the filament " -#~ "during every filament switch which will have a good result in most " -#~ "cases.\n" -#~ "\n" -#~ "Please note there are a few cases that will make the calibration result " -#~ "not reliable: using a texture plate to do the calibration; the build " -#~ "plate does not have good adhesion (please wash the build plate or apply " -#~ "gluestick!) ...You can find more from our wiki.\n" -#~ "\n" -#~ "The calibration results have about 10 percent jitter in our test, which " -#~ "may cause the result not exactly the same in each calibration. We are " -#~ "still investigating the root cause to do improvements with new updates." -#~ msgstr "" -#~ "請從我們的wiki中找到流量動態校準的詳細資訊。\n" -#~ "\n" -#~ "通常情況下，校準是不必要的。當你開始單色/單線材列印，並在列印開始選單中勾" -#~ "選了\"流量動態校準\"選項時，列印設備將按照舊的方式，在列印前校準絲料；當你" -#~ "開始多色/多線材列印時，列印設備將在每次換絲料時使用預設的補償參數，這在大" -#~ "多數情況下會產生良好的效果。\n" -#~ "\n" -#~ "請注意，有幾種情況會導致校準結果不可靠：使用紋理板進行校準；建模平台黏附效" -#~ "果不好（請清洗建模平台或塗抹膠棒）... 你可以在我們的wiki中找到更多資訊。\n" -#~ "\n" -#~ "在我們的測試中，校準結果有約 10% 的波動，這可能導致每次校準的結果略有不" -#~ "同。我們仍在調查根本原因，並通過新的更新進行改進。" - -#~ msgid "" -#~ "Only one of the results with the same name will be saved. Are you sure " -#~ "you want to overrides the other results?" -#~ msgstr "相同名稱的結果只會儲存一個。確定要覆蓋其他結果嗎？" - -#, c-format, boost-format -#~ msgid "" -#~ "There is already a historical calibration result with the same name: %s. " -#~ "Only one of the results with the same name is saved. Are you sure you " -#~ "want to overrides the historical result?" -#~ msgstr "" -#~ "已經存在一個具有相同名稱的校準結果：%s。相同名稱的結果只會儲存一個。確定要" -#~ "覆蓋嗎？" - -#~ msgid "Please find the cornor with perfect degree of extrusion" -#~ msgstr "請在你的列印板上找到最接近完美的直角" - -#~ msgid "V" -#~ msgstr "版本：" - -#~ msgid "" -#~ "Orca Slicer is based on BambuStudio by Bambulab, which is from " -#~ "PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro " -#~ "Ranellucci and the RepRap community" -#~ msgstr "" -#~ "Orca Slicer 是基於 Bambulab 的 BambuStudio 開發，而 BambuStudio 源自於 " -#~ "Prusa Research 的 PrusaSlicer。PrusaSlicer 源自於 Alessandro Ranellucci " -#~ "的 Slic3r 和 RepRap 社群" - -#~ msgid "Export &Configs" -#~ msgstr "匯出設定檔" - -#~ msgid "Infill direction" -#~ msgstr "填充方向" - -#, fuzzy -#~ msgid "" -#~ "Enable this to get a G-code file which has G2 and G3 moves. And the " -#~ "fitting tolerance is same with resolution" -#~ msgstr "" -#~ "打開這個設定，匯出的 G-code 將包含 G2 G3 指令。圓弧擬合的容許值和精度相" -#~ "同。" - -#~ msgid "" -#~ "Infill area is enlarged slightly to overlap with wall for better bonding. " -#~ "The percentage value is relative to line width of sparse infill" -#~ msgstr "" -#~ "填充區域被輕微擴大，並和外牆產生重疊，進而產生更好的黏接。表示為相對稀疏填" -#~ "充的線寬的百分比。" - -#~ msgid "Unload Filament" -#~ msgstr "退料" - -#~ msgid "" -#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " -#~ "automatically load or unload filiament." -#~ msgstr "選擇 1 個 AMS 槽位，然後點擊進料/退料按鈕以自動進料/退料。" - -#~ msgid "MainBoard" -#~ msgstr "主板" - -#~ msgid "active" -#~ msgstr "活動的" - -#~ msgid "Jump to layer" -#~ msgstr "轉換到層" - -#~ msgid "Cabin humidity" -#~ msgstr "AMS 內部濕度" - -#~ msgid "" -#~ "Green means that AMS humidity is normal, orange represent humidity is " -#~ "high, red represent humidity is too high.(Hygrometer: lower the better.)" -#~ msgstr "" -#~ "綠色表示 AMS 濕度正常，橙色表示濕度高，紅色表示濕度過高。（濕度計：越低越" -#~ "好。）" - -#~ msgid "Desiccant status" -#~ msgstr "乾燥劑狀態" - -#~ msgid "" -#~ "A desiccant status lower than two bars indicates that desiccant may be " -#~ "inactive. Please change the desiccant.(The bars: higher the better.)" -#~ msgstr "" -#~ "乾燥劑狀態低於兩格表示乾燥劑可能是趨近無效。請更換乾燥劑。（指示格：越高越" -#~ "好。）" - -#~ msgid "" -#~ "Note: When the lid is open or the desiccant pack is changed, it can take " -#~ "hours or a night to absorb the moisture. Low temperatures also slow down " -#~ "the process. During this time, the indicator may not represent the " -#~ "chamber accurately." -#~ msgstr "" -#~ "注意：當 AMS 蓋子打開或更換乾燥劑包裝時，可能需要數小時或一晚才能吸收水" -#~ "分，低溫也會減慢這一過程。在此期間，濕度指示的數值可能並不準確。" - -#~ msgid "" -#~ "Note: if new filament is inserted during printing, the AMS will not " -#~ "automatically read any information until printing is completed." -#~ msgstr "" -#~ "注意：如果是在列印過程中插入新的線材，AMS 會在列印作業結束後自動讀取此線材" -#~ "信息。" - -#, boost-format -#~ msgid "Succeed to export G-code to %1%" -#~ msgstr "成功匯出 G-code 至 %1%" - -#~ msgid "Initialize failed (No Device)!" -#~ msgstr "初始化失敗（沒有列印設備）！" - -#~ msgid "Initialize failed (No Camera Device)!" -#~ msgstr "初始化失敗（沒有攝影機）" - -#~ msgid "" -#~ "Printer is busy downloading, Please wait for the downloading to finish." -#~ msgstr "列印設備正忙於下載，請等待下載完成。" - -#~ msgid "Initialize failed (Not supported on the current printer version)!" -#~ msgstr "初始化失敗（目前列印設備的版本不支援）！" - -#~ msgid "Initialize failed (Not accessible in LAN-only mode)!" -#~ msgstr "初始化失敗（在區域網路模式中不可存取）！" - -#~ msgid "Initialize failed (Missing LAN ip of printer)!" -#~ msgstr "初始化失敗（未找到列印設備的區域網路地址）！" - -#, c-format, boost-format -#~ msgid "Stopped [%d]!" -#~ msgstr "已停止 [%d]!" - -#, c-format, boost-format -#~ msgid "Load failed [%d]!" -#~ msgstr "載入失敗 [%d]！" - -#, c-format, boost-format -#~ msgid "No files [%d]" -#~ msgstr "檔案清單為空[%d]" - -#, c-format, boost-format -#~ msgid "Load failed [%d]" -#~ msgstr "載入失敗 [%d]" - -#~ msgid "Failed to fetching model information from printer." -#~ msgstr "無法從列印設備獲取模型資訊。" - -#~ msgid "Failed to parse model informations." -#~ msgstr "解析模型資訊失敗。" - -#, boost-format -#~ msgid "" -#~ "You have changed some settings of preset \"%1%\". \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "preset?" -#~ msgstr "你已經更改了預設 \"%1%\"，是否在切換後要保留這些更改的預設參數？" - -#~ msgid "" -#~ "You have changed some preset settings. \n" -#~ "Would you like to keep these changed settings (new value) after switching " -#~ "preset?" -#~ msgstr "你已經更改了預設參數，是否在切換後要保留這些更改的預設參數？" - -#~ msgid "" -#~ "Add solid infill near sloping surfaces to guarantee the vertical shell " -#~ "thickness (top+bottom solid layers)" -#~ msgstr "在斜面表面附近增加實心填充，以保證垂直外殼厚度（頂部+底部實心層）" - -#~ msgid "Configuration package updated to " -#~ msgstr "設定檔已更新到" - -#~ msgid "" -#~ "Improve shell precision by adjusting outer wall spacing. This also " -#~ "improves layer consistency." -#~ msgstr "最佳化外牆路徑以提高外牆精度。這個最佳化同時減少層紋" - -#~ msgid "" -#~ "The minimum printing speed for the filament when slow down for better " -#~ "layer cooling is enabled, when printing overhangs and when feature speeds " -#~ "are not specified explicitly." -#~ msgstr "" -#~ "線材最小列印速度。當啟用減速以實現更好的層冷卻、列印懸空以及未明確指定特徵" -#~ "速度時" - -#~ msgid "No sparse layers (EXPERIMENTAL)" -#~ msgstr "無稀疏層（实验性功能）" - -#~ msgid "The Config can not be loaded." -#~ msgstr "設定檔無法載入。" - -#~ msgid "The 3mf is generated by old Orca Slicer, load geometry data only." -#~ msgstr "該 3mf 檔案來自舊版本的 Orca Slicer" - -#~ msgid "Movement:" -#~ msgstr "移動：" - -#~ msgid "Movement" -#~ msgstr "移動" - -#~ msgid "Auto Segment" -#~ msgstr "自動分割" - -#~ msgid "Depth ratio" -#~ msgstr "深度" - -#~ msgid "Prizm" -#~ msgstr "稜柱" - -#~ msgid "connector is out of cut contour" -#~ msgstr "個連接件超出了切割面範圍" - -#~ msgid "connectors are out of cut contour" -#~ msgstr "個連接件超出了切割面範圍" - -#~ msgid "connector is out of object" -#~ msgstr "個連接件穿透了模型" - -#~ msgid "connectors is out of object" -#~ msgstr "個連接件穿透了模型" - -#~ msgid "" -#~ "Invalid state. \n" -#~ "No one part is selected for keep after cut" -#~ msgstr "" -#~ "無效狀態。\n" -#~ "切割後沒有選取要保留的部分" - -#~ msgid "Edit Text" -#~ msgstr "編輯文字" - -#~ msgid "Error! Unable to create thread!" -#~ msgstr "發生錯誤，無法建立執行緒。" - -#~ msgid "Exception" -#~ msgstr "異常" - -#~ msgid "Choose SLA archive:" -#~ msgstr "選擇 SLA 存檔：" - -#~ msgid "Import file" -#~ msgstr "匯入檔案" - -#~ msgid "Import model and profile" -#~ msgstr "匯入模型和設定檔" - -#~ msgid "Import profile only" -#~ msgstr "僅匯入設定檔" - -#~ msgid "Import model only" -#~ msgstr "僅匯入模型" - -#~ msgid "Accurate" -#~ msgstr "準確的" - -#~ msgid "Balanced" -#~ msgstr "平衡的" - -#~ msgid "Quick" -#~ msgstr "快速的" - -#~ msgid "" -#~ "Discribe how long the nozzle will move along the last path when retracting" -#~ msgstr "表示回抽時擦拭的移動距離。" - -#~ msgid "" -#~ "Simplify Model\n" -#~ "Did you know that you can reduce the number of triangles in a mesh using " -#~ "the Simplify mesh feature? Right-click the model and select Simplify " -#~ "model. Read more in the documentation." -#~ msgstr "" -#~ "簡化模型\n" -#~ "你知道嗎，你可以使用\"簡化模型\"功能減少模型的三角形數。在模型上單擊滑鼠右" -#~ "鍵，然後選擇\"簡化模型\"。" - -#~ msgid "" -#~ "Subtract a Part\n" -#~ "Did you know that you can subtract one mesh from another using the " -#~ "Negative part modifier? That way you can, for example, create easily " -#~ "resizable holes directly in Orca Slicer. Read more in the documentation." -#~ msgstr "" -#~ "減去部分幾何體\n" -#~ "你知道嗎，你可以使用負零件從另一個幾何體中減去另一個幾何體。例如，可以直接" -#~ "在 Orca Slicer 中建立可輕鬆調整大小的孔。" - -#~ msgid "Filling bed " -#~ msgstr "填充自動朝向" - -#, boost-format -#~ msgid "%1% infill pattern doesn't support 100%% density." -#~ msgstr "%1% 填充圖案不支援 100%% 密度。" - -#~ msgid "" -#~ "Switch to rectilinear pattern?\n" -#~ "Yes - switch to rectilinear pattern automaticlly\n" -#~ "No - reset density to default non 100% value automaticlly" -#~ msgstr "" -#~ "切換到直線圖案？\n" -#~ "是 - 自動切換到直線圖案\n" -#~ "否 - 自動將密度重設為預設的非 100% 值" - -#~ msgid "Please heat the nozzle to above 170 degree before loading filament." -#~ msgstr "請在進料前把噴嘴升溫到 170℃" - -#~ msgid "Show g-code window" -#~ msgstr "顯示 G-code 視窗" - -#~ msgid "If enabled, g-code window will be displayed." -#~ msgstr "如果啟用，將顯示 G-Code 視窗。" - -#, c-format -#~ msgid "Density of internal sparse infill, 100% means solid throughout" -#~ msgstr "內部填充密度，100% 表示整體實心" - -#~ msgid "Tree support wall loops" -#~ msgstr "樹狀支撐外牆層數" - -#~ msgid "This setting specify the count of walls around tree support" -#~ msgstr "樹狀支撐外牆層數" - -#, c-format, boost-format -#~ msgid " doesn't work at 100%% density " -#~ msgstr " 填充圖案不支援 100%% 密度" - -#~ msgid "Ctrl + Shift + Enter" -#~ msgstr "Ctrl + Shift + Enter" - -#~ msgid "Tool-Lay on Face" -#~ msgstr "工具-選擇底面" - -#~ msgid "Export as STL" -#~ msgstr "匯出為 STL" - -#~ msgid "Check cloud service status" -#~ msgstr "檢查雲端服務狀態" - -#~ msgid "Please input a valid value (K in 0~0.5)" -#~ msgstr "請輸入有效的數值（K 值的範圍為 0~0.5）" - -#~ msgid "Please input a valid value (K in 0~0.5, N in 0.6~2.0)" -#~ msgstr "請輸入有效的數值（K 值的範圍為 0~0.5, N 值的範圍為 0.6~2.0）" - -#~ msgid "Export all objects as STL" -#~ msgstr "匯出所有物件為 STL" - -#~ msgid "The 3mf is not compatible, load geometry data only!" -#~ msgstr "該 3mf 檔案與軟體不相容，將只載入幾何數據。" - -#~ msgid "Incompatible 3mf" -#~ msgstr "不相容的 3mf" - -#~ msgid "Add/Remove printers" -#~ msgstr "新增/刪除列印設備" - -#~ msgid "" -#~ "When print by object, machines with I3 structure will not generate " -#~ "timelapse videos." -#~ msgstr "按物件列印時，龍門結構的設備不會產生縮時攝影影片" - -#, c-format, boost-format -#~ msgid "%s is not supported by AMS." -#~ msgstr "AMS 不支援 %s 。" - -#~ msgid "Don't remind me of this version again" -#~ msgstr "不要再提醒我這個版本" - -#~ msgid "Error: IP or Access Code are not correct" -#~ msgstr "錯誤：IP 或訪問碼不正確" - -#~ msgid "" -#~ "Extrude perimeters that have a part over an overhang in the reverse " -#~ "direction on odd layers. This alternating pattern can drastically improve " -#~ "steep overhang." -#~ msgstr "" -#~ "在奇數層上以相反方向列印懸空部位。 這種交替模式的可以大大改善陡峭的懸空列" -#~ "印品質。" - -#~ msgid "Order of inner wall/outer wall/infil" -#~ msgstr "內牆/外牆/填充的順序" - -#~ msgid "Print sequence of inner wall, outer wall and infill. " -#~ msgstr "內圈牆/外圈牆/填充的列印順序" - -#~ msgid "inner/outer/infill" -#~ msgstr "內牆/外牆/填充" - -#~ msgid "outer/inner/infill" -#~ msgstr "外牆/內牆/填充" - -#~ msgid "infill/inner/outer" -#~ msgstr "填充/內牆/外牆" - -#~ msgid "infill/outer/inner" -#~ msgstr "填充/外牆/內牆" - -#~ msgid "inner-outer-inner/infill" -#~ msgstr "內牆/外牆/內牆/填充" - -#~ msgid "Export 3MF" -#~ msgstr "匯出 3MF" - -#~ msgid "Export project as 3MF." -#~ msgstr "匯出專案為 3MF。" - -#~ msgid "Export slicing data" -#~ msgstr "匯出切片資料" - -#~ msgid "Export slicing data to a folder." -#~ msgstr "匯出切片資料到資料夾" - -#~ msgid "Load slicing data" -#~ msgstr "匯入切片資料" - -#~ msgid "Load cached slicing data from directory" -#~ msgstr "從目錄匯入切片資料的快取" - -#~ msgid "Export STL" -#~ msgstr "匯出 STL 檔案" - -#~ msgid "Export the objects as multiple STL." -#~ msgstr "將物件匯出為多個 STL 檔案" - -#~ msgid "Slice" -#~ msgstr "切片" - -#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -#~ msgstr "切片平台：0-所有平台，i-第i個平台，其他-無效" - -#~ msgid "Show command help." -#~ msgstr "顯示命令行幫助。" - -#~ msgid "Update the configs values of 3mf to latest." -#~ msgstr "將 3mf 的設定值更新為最新值。" - -#~ msgid "Load default filaments" -#~ msgstr "載入預設列印線材" - -#~ msgid "Load first filament as default for those not loaded" -#~ msgstr "載入第一個列印線材為預設代替未能載入的線材" - -#~ msgid "max triangle count per plate for slicing." -#~ msgstr "切片時每個列印板的最大三角形數。" - -#~ msgid "max slicing time per plate in seconds." -#~ msgstr "每個列印板的最大切片時間（秒）。" - -#~ msgid "Normative check" -#~ msgstr "規範性檢查" - -#~ msgid "Check the normative items." -#~ msgstr "檢查規範性項目。" - -#~ msgid "Output Model Info" -#~ msgstr "輸出模型資訊" - -#~ msgid "Output the model's information." -#~ msgstr "輸出模型的資訊。" - -#~ msgid "Export Settings" -#~ msgstr "匯出設定" - -#~ msgid "Export settings to a file." -#~ msgstr "匯出設定檔到檔案。" - -#~ msgid "Send progress to pipe" -#~ msgstr "將進度傳送到管道" - -#~ msgid "Send progress to pipe." -#~ msgstr "將進度傳送到管道。" - -#~ msgid "Arrange Options" -#~ msgstr "擺放選項" - -#~ msgid "Arrange options: 0-disable, 1-enable, others-auto" -#~ msgstr "擺放選項：0-關閉，1-開啟，其他-自動" - -#~ msgid "Repetions count" -#~ msgstr "重複次數" - -#~ msgid "Repetions count of the whole model" -#~ msgstr "整個模型的重複次數" - -#~ msgid "Convert Unit" -#~ msgstr "轉換單位" - -#~ msgid "Convert the units of model" -#~ msgstr "轉換模型的單位" - -#~ msgid "Rotate around X" -#~ msgstr "繞 X 旋轉" - -#~ msgid "Rotation angle around the X axis in degrees." -#~ msgstr "繞 X 軸的旋轉角度（以度為單位）。" - -#~ msgid "Scale the model by a float factor" -#~ msgstr "根據因子縮放模型" - -#~ msgid "Load General Settings" -#~ msgstr "載入一般設定" - -#~ msgid "Load process/machine settings from the specified file" -#~ msgstr "從指定檔案載入列印參數/設備設定" - -#~ msgid "Load Filament Settings" -#~ msgstr "載入線材設定" - -#~ msgid "Load filament settings from the specified file list" -#~ msgstr "從指定檔案清單載入線材設定" - -#~ msgid "Skip Objects" -#~ msgstr "零件跳過" - -#~ msgid "Skip some objects in this print" -#~ msgstr "列印過程中跳過一些零件" - -#, fuzzy -#~ msgid "load uptodate process/machine settings when using uptodate" -#~ msgstr "使用最新設定時載入最新的列印參數/設備設定" - -#, fuzzy -#~ msgid "" -#~ "load uptodate process/machine settings from the specified file when using " -#~ "uptodate" -#~ msgstr "使用最新設定時，從指定的檔案清單中載入最新的列印參數/設備設定。" - -#~ msgid "Output directory" -#~ msgstr "輸出路徑" - -#~ msgid "Output directory for the exported files." -#~ msgstr "匯出檔案的輸出路徑。" - -#~ msgid "Debug level" -#~ msgstr "除錯等級" - -#~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" -#~ msgstr "" -#~ "設定除錯日誌等級。0：fatal， 1：error， 2：warning， 3：info， 4：debug， " -#~ "5：trace\n" - -#, boost-format -#~ msgid "The selected preset: %1% is not found." -#~ msgstr "未找到選定的預設值：%1%。" - -#~ msgid "" -#~ "3D Scene Operations\n" -#~ "Did you know how to control view and object/part selection with mouse and " -#~ "touchpanel in the 3D scene?" -#~ msgstr "" -#~ "3D 場景操作\n" -#~ "如何在 3D 場景中使用滑鼠和觸碰面板進行視角控制和物件/零件選擇" - -#~ msgid "" -#~ "Fix Model\n" -#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of " -#~ "slicing problems?" -#~ msgstr "" -#~ "修復模型\n" -#~ "你知道嗎？你可以修復一個損壞的 3D 模型以避免諸多切片問題。" - -#~ msgid "" -#~ "When need to print with the printer door opened\n" -#~ "Opening the printer door can reduce the probability of extruder/hotend " -#~ "clogging when printing lower temperature filament with a higher enclosure " -#~ "temperature. More info about this in the Wiki." -#~ msgstr "" -#~ "當需要打開列印設備門進行列印時\n" -#~ "當列印較低溫度的線材時，打開列印設備門可以減少擠出機或熱端堵塞的可能性。 " -#~ "有關此內容的更多信息，請參見 Wiki。" - -#~ msgid "Embedded" -#~ msgstr "嵌入的" - -#~ msgid "" -#~ "Orca Slicer configuration file may be corrupted and is not abled to be " -#~ "parsed.Please delete the file and try again." -#~ msgstr "" -#~ "Orca Slicer 設定檔可能已損壞而無法解析。請刪除此檔案並重新啟動 Orca " -#~ "Slicer。" - -#~ msgid "Online Models" -#~ msgstr "線上模型" - -#~ msgid "Show online staff-picked models on the home page" -#~ msgstr "在首頁上顯示推薦的模型" - -#, c-format -#~ msgid "" -#~ "Force cooling fan to be specific speed when overhang degree of printed " -#~ "part exceeds this value. Expressed as percentage which indicates how much " -#~ "width of the line without support from lower layer. 0%% means forcing " -#~ "cooling for all outer wall no matter how much overhang degree" -#~ msgstr "" -#~ "當列印物件的懸空程度超過此值時，強制冷卻風扇達到特定速度。\n" -#~ "用百分比表示，表明沒有下層支撐的線的寬度是多少。0%% 意味著無論懸空程度如" -#~ "何，都要對所有外壁強制冷卻。" - -#~ msgid "The minimum printing speed when slow down for cooling" -#~ msgstr "自動冷卻降速的最小列印速度" - -#~ msgid "" -#~ "There are currently no identical spare consumables available, and " -#~ "automatic replenishment is currently not possible. \n" -#~ "(Currently supporting automatic supply of consumables with the same " -#~ "brand, material type, and color)" -#~ msgstr "" -#~ "目前無相同的備用線材，暫時無法自動補充線材。\n" -#~ "（目前支援品牌、線材種類、顏色相同的線材的自動補給）" - -#~ msgid "Invalid nozzle diameter" -#~ msgstr "無效的噴嘴口徑" - -#~ msgid "" -#~ "The bed temperature exceeds filament's vitrification temperature. Please " -#~ "open the front door of printer before printing to avoid nozzle clog." -#~ msgstr "" -#~ "熱床溫度超過了線材的軟化溫度。請在列印前打開３Ｄ列印設備前門以防堵頭。" - -#~ msgid "Temperature of vitrificaiton" -#~ msgstr "軟化溫度" - -#~ msgid "" -#~ "Material becomes soft at this temperature. Thus the heatbed cannot be " -#~ "hotter than this tempature" -#~ msgstr "材料在這個溫度開始變軟。因此熱床溫度不能超過這個溫度。" - -#~ msgid "Enable this option if machine has auxiliary part cooling fan" -#~ msgstr "如果機器有輔助物件冷卻風扇，勾選該選項" - -#~ msgid "" -#~ "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed " -#~ "during printing except the first several layers which is defined by no " -#~ "cooling layers" -#~ msgstr "" -#~ "輔助物件冷卻風扇的轉速。輔助物件冷卻風扇將一直運行在該速度，除了設置的無需" -#~ "冷卻的前若干層" - -#~ msgid "" -#~ "Filter out gaps smaller than the threshold specified. This setting won't " -#~ "affect top/bottom layers" -#~ msgstr "小於指定臨界值的微小間隙不填充。本設置不會對頂/底層起作用" - -#~ msgid "Empty layers around bottom are replaced by nearest normal layers." -#~ msgstr "底部出現空層，已被最近的正常層替換。" - -#~ msgid "The model has too many empty layers." -#~ msgstr "模型有太多空層。" - -#~ msgid "Cali" -#~ msgstr "校準" - -#~ msgid "Calibration of extrusion" -#~ msgstr "擠出校準" - -#~ msgid "Push new filament into the extruder" -#~ msgstr "將新的線材推入擠出機" - -#, c-format, boost-format -#~ msgid "" -#~ "Bed temperature of other layer is lower than bed temperature of initial " -#~ "layer for more than %d degree centigrade.\n" -#~ "This may cause model broken free from build plate during printing" -#~ msgstr "" -#~ "其它層的熱床溫度比首層熱床溫度低太多，超過了攝氏 %d 度。\n" -#~ "這可能導致列印中模型從熱床脫落" - -#~ msgid "" -#~ "Bed temperature is higher than vitrification temperature of this " -#~ "filament.\n" -#~ "This may cause nozzle blocked and printing failure\n" -#~ "Please keep the printer open during the printing process to ensure air " -#~ "circulation or reduce the temperature of the hot bed" -#~ msgstr "" -#~ "熱床溫度超過了線材的軟化溫度，線材軟化可能造成噴頭堵塞。\n" -#~ "請保持３Ｄ列印設備在列印過程中敞開，保證空氣流通或降低熱床溫度" - -#~ msgid "Total Time Estimation" -#~ msgstr "總時間預估" - -#~ msgid "Resonance frequency identification" -#~ msgstr "共振頻率辨識" - -#~ msgid "Immediately score" -#~ msgstr "立即打分" - -#~ msgid "Please give a score for your favorite Bambu Market model." -#~ msgstr "請為你喜歡的 Bambu 商城模型打分。" - -#~ msgid "Score" -#~ msgstr "打分" - -#~ msgid "Bambu High Temperature Plate" -#~ msgstr "高溫列印熱床" - -#~ msgid "Can't connect to the printer" -#~ msgstr "無法連接列印設備" - -#~ msgid "Recommended temperature range" -#~ msgstr "建議溫度範圍" - -#~ msgid "High Temp Plate" -#~ msgstr "高溫列印熱床" - -#~ msgid "" -#~ "Bed temperature when high temperature plate is installed. Value 0 means " -#~ "the filament does not support to print on the High Temp Plate" -#~ msgstr "安裝高溫列印熱床時的熱床溫度。0值表示這個線材不支援高溫列印熱床" - -#~ msgid "Internal bridge support thickness" -#~ msgstr "內部橋接支撐厚度" - -#~ msgid "" -#~ "If enabled, support loops will be generated under the contours of " -#~ "internal bridges.These support loops could prevent internal bridges from " -#~ "extruding over the air and improve the top surface quality, especially " -#~ "when the sparse infill density is low.This value determines the thickness " -#~ "of the support loops. 0 means disable this feature" -#~ msgstr "" -#~ "如果開啟， Orca Slicer 切片會沿著內部橋接的邊沿在其下方產生支撐輪廓。這些" -#~ "支撐輪廓可以防止懸空地列印內部橋接並提高頂面質量，特別是在填充密度較低的情" -#~ "況下。這個設置用於調整支撐輪廓的厚度，0表示關閉此特性。" - -#~ msgid "" -#~ "Style and shape of the support. For normal support, projecting the " -#~ "supports into a regular grid will create more stable supports (default), " -#~ "while snug support towers will save material and reduce object scarring.\n" -#~ "For tree support, slim style will merge branches more aggressively and " -#~ "save a lot of material (default), while hybrid style will create similar " -#~ "structure to normal support under large flat overhangs." -#~ msgstr "" -#~ "支撐物的樣式和形狀。對於普通支撐，將支撐投射到一個規則的網格中，將創建更穩" -#~ "定的支撐（默認），而緊貼的支撐塔將節省材料並減少物體的瑕疵。\n" -#~ "對於樹形支撐，苗條板的風格將更積極地合併樹枝，並節省大量的材料（默認），而" -#~ "混合風格將在大的平面懸垂下創建與正常支撐類似的結構。" - -#~ msgid "Target chamber temperature" -#~ msgstr "目標腔體溫度" - -#~ msgid "Bed temperature difference" -#~ msgstr "熱床溫差" - -#~ msgid "" -#~ "Do not recommend bed temperature of other layer to be lower than initial " -#~ "layer for more than this threshold. Too low bed temperature of other " -#~ "layer may cause the model broken free from build plate" -#~ msgstr "" -#~ "不建議其它層熱床溫度比首層的熱床溫度低於這個值。太低的其它層熱床溫度可能導" -#~ "致列印過程中模型從列印板脫落。" - -#~ msgid "Orient the model" -#~ msgstr "旋轉模型"