diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index 7200f5c1a83..f126acd1924 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -8,10 +8,10 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-02-29 18:06+0800\n" +"POT-Creation-Date: 2024-02-28 21:04+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE <>\n" +"Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -660,6 +660,14 @@ msgstr "" msgid "Text shape" msgstr "" +#. TRN - Title in Undo/Redo stack after rotate with text around emboss axe +msgid "Text rotate" +msgstr "" + +#. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface +msgid "Text move" +msgstr "" + msgid "Set Mirror" msgstr "" @@ -678,9 +686,6 @@ msgstr "" msgid "Emboss" msgstr "" -msgid "Text-Rotate" -msgstr "" - msgid "NORMAL" msgstr "" @@ -1050,6 +1055,14 @@ msgstr "" msgid "Collection" msgstr "" +#. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe +msgid "SVG rotate" +msgstr "" + +#. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface +msgid "SVG move" +msgstr "" + msgid "Enter SVG gizmo" msgstr "" @@ -1062,10 +1075,6 @@ msgstr "" msgid "SVG" msgstr "" -#. TRN This is an item label in the undo-redo stack. -msgid "SVG-Rotate" -msgstr "" - #, possible-boost-format msgid "Opacity (%1%)" msgstr "" @@ -1179,9 +1188,6 @@ msgstr "" msgid "Reset scale" msgstr "" -msgid "Resize" -msgstr "" - msgid "Distance of the center of the SVG to the model surface." msgstr "" @@ -1660,6 +1666,17 @@ msgstr "" msgid "Stanford Bunny" msgstr "" +msgid "Orca String Hell" +msgstr "" + +msgid "" +"This model features text embossment on the top surface. For optimal results, " +"it is advisable to set the 'One Wall Threshold(min_width_top_surface)' to 0 " +"for the 'Only One Wall on Top Surfaces' to work best.\n" +"Yes - Change these settings automatically\n" +"No - Do not change these settings for me" +msgstr "" + msgid "Text" msgstr "" @@ -6470,6 +6487,15 @@ msgid "" "independent support layer height" msgstr "" +msgid "" +"Enabling this option will modify the model's shape. If your print requires " +"precise dimensions or is part of an assembly, it's important to double-check " +"whether this change in geometry impacts the functionality of your print." +msgstr "" + +msgid "Are you sure you want to enable this option?" +msgstr "" + msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" @@ -6511,9 +6537,6 @@ msgstr "" msgid "Walls and surfaces" msgstr "" -msgid "Small Area Infill Flow Compensation (beta)" -msgstr "" - msgid "Bridging" msgstr "" @@ -6733,6 +6756,9 @@ msgstr "" msgid "Extruder Clearance" msgstr "" +msgid "Adaptive bed mesh" +msgstr "" + msgid "Accessory" msgstr "" @@ -6992,9 +7018,6 @@ msgstr "" msgid "The name \"%1%\" already exists." msgstr "" -msgid "Back" -msgstr "" - msgid "Basic Info" msgstr "" @@ -7573,7 +7596,10 @@ msgstr "" msgid "Need to check the unsaved changes before configuration updates." msgstr "" -msgid "Configuration package updated to " +msgid "Configuration package: " +msgstr "" + +msgid " updated to " msgstr "" msgid "Open G-code file:" @@ -7923,6 +7949,10 @@ msgstr "" msgid "Plate %d: %s does not support filament %s" msgstr "" +msgid "" +"Setting the jerk speed too low could lead to artifacts on curved surfaces" +msgstr "" + msgid "Generating skirt & brim" msgstr "" @@ -8267,7 +8297,9 @@ msgstr "" msgid "" "Improve shell precision by adjusting outer wall spacing. This also improves " -"layer consistency." +"layer consistency.\n" +"Note: This setting will only take effect if the wall sequence is configured " +"to Inner-Outer" msgstr "" msgid "Only one wall on top surfaces" @@ -8287,7 +8319,7 @@ msgid "" "layer, it won't be considered at a top layer where its width is below this " "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " -"a % of the perimeter extrusion width.\n" +"a %% of the perimeter extrusion width.\n" "Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." @@ -8342,16 +8374,32 @@ msgid "" "directions on odd layers irrespective of their overhang degree." msgstr "" +msgid "Bridge counterbole holes" +msgstr "" + +msgid "" +"This option creates bridges for counterbore holes, allowing them to be " +"printed without support. Available modes include:\n" +"1. None: No bridge is created.\n" +"2. Partially Bridged: Only a part of the unsupported area will be bridged.\n" +"3. Sacrificial Layer: A full sacrificial bridge layer is created." +msgstr "" + +msgid "Partially bridged" +msgstr "" + +msgid "Sacrificial layer" +msgstr "" + msgid "Reverse threshold" msgstr "" msgid "Overhang reversal threshold" msgstr "" -#, possible-c-format, possible-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered " -"useful. Can be a % of the perimeter width.\n" +"useful. Can be a (%) of the perimeter width.\n" "Value 0 enables reversal on every odd layers regardless." msgstr "" @@ -8517,11 +8565,11 @@ msgid "Fan speed" msgstr "" msgid "" -"Speed of exhaust fan during printing.This speed will overwrite the speed in " +"Speed of exhuast fan during printing.This speed will overwrite the speed in " "filament custom gcode" msgstr "" -msgid "Speed of exhaust fan after printing completes" +msgid "Speed of exhuast fan after printing completes" msgstr "" msgid "No cooling for the first" @@ -8767,6 +8815,26 @@ msgid "" "external surfaces of the part." msgstr "" +msgid "Wall loop direction" +msgstr "" + +msgid "" +"The direction which the wall loops are extruded when looking down from the " +"top.\n" +"\n" +"By default all walls are extruded in counter-clockwise, unless Reverse on " +"odd is enabled. Set this to any option other than Auto will force the wall " +"direction regardless of the Reverse on odd.\n" +"\n" +"This option will be disabled if sprial vase mode is enabled." +msgstr "" + +msgid "Counter clockwise" +msgstr "" + +msgid "Clockwise" +msgstr "" + msgid "Height to rod" msgstr "" @@ -8788,6 +8856,50 @@ msgid "" "printing." msgstr "" +msgid "Bed mesh min" +msgstr "" + +msgid "" +"This option sets the min point for the allowed bed mesh area. Due to the " +"probe's XY offset, most printers are unable to probe the entire bed. To " +"ensure the probe point does not go outside the bed area, the minimum and " +"maximum points of the bed mesh should be set appropriately. OrcaSlicer " +"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " +"exceed these min/max points. This information can usually be obtained from " +"your printer manufacturer. The default setting is (-99999, -99999), which " +"means there are no limits, thus allowing probing across the entire bed." +msgstr "" + +msgid "Bed mesh max" +msgstr "" + +msgid "" +"This option sets the max point for the allowed bed mesh area. Due to the " +"probe's XY offset, most printers are unable to probe the entire bed. To " +"ensure the probe point does not go outside the bed area, the minimum and " +"maximum points of the bed mesh should be set appropriately. OrcaSlicer " +"ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not " +"exceed these min/max points. This information can usually be obtained from " +"your printer manufacturer. The default setting is (99999, 99999), which " +"means there are no limits, thus allowing probing across the entire bed." +msgstr "" + +msgid "Probe point distance" +msgstr "" + +msgid "" +"This option sets the preferred distance between probe points (grid size) for " +"the X and Y directions, with the default being 50mm for both X and Y." +msgstr "" + +msgid "Mesh margin" +msgstr "" + +msgid "" +"This option determines the additional distance by which the adaptive bed " +"mesh area should be expanded in the XY directions." +msgstr "" + msgid "Extruder Color" msgstr "" @@ -8893,8 +9005,9 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling " -"(94% if you measure 94mm instead of 100mm). The part will be scaled in xy to " -"compensate. Only the filament used for the perimeter is taken into account.\n" +"(94%% if you measure 94mm instead of 100mm). The part will be scaled in xy " +"to compensate. Only the filament used for the perimeter is taken into " +"account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." msgstr "" @@ -9074,7 +9187,7 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Density of internal sparse infill, 100% turns all sparse infill into solid " +"Density of internal sparse infill, 100%% turns all sparse infill into solid " "infill and internal solid infill pattern will be used" msgstr "" @@ -9649,7 +9762,7 @@ msgstr "" msgid "This G-code will be used as a custom code" msgstr "" -msgid "Enable Flow Compensation" +msgid "Small area flow compensation (beta)" msgstr "" msgid "Enable flow compensation for small infill areas" @@ -9852,9 +9965,9 @@ msgid "Min print speed" msgstr "" msgid "" -"The minimum printing speed for the filament when slow down for better layer " -"cooling is enabled, when printing overhangs and when feature speeds are not " -"specified explicitly." +"The minimum printing speed that the printer will slow down to to attempt to " +"maintain the minimum layer time above, when slow down for better layer " +"cooling is enabled." msgstr "" msgid "Nozzle diameter" @@ -10209,6 +10322,9 @@ msgstr "" msgid "Aligned" msgstr "" +msgid "Back" +msgstr "" + msgid "Random" msgstr "" @@ -10394,7 +10510,7 @@ msgstr "" msgid "Enable filament ramming" msgstr "" -msgid "No sparse layers (EXPERIMENTAL)" +msgid "No sparse layers (beta)" msgstr "" msgid "" @@ -10989,13 +11105,12 @@ msgstr "" msgid "Polyhole detection margin" msgstr "" -#, possible-c-format, possible-boost-format msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not " "be on the circle circumference. This setting allows you some leway to " "broaden the detection.\n" -"In mm or in % of the radius." +"In (mm or in %) of the radius." msgstr "" msgid "Polyhole twist" @@ -13703,6 +13818,38 @@ msgid "" "version of PrusaSlicer and is not compatible." msgstr "" +#, possible-boost-format +msgid "" +"Post-processing script %1% failed.\n" +"\n" +"The post-processing script is expected to change the G-code file %2% in " +"place, but the G-code file was deleted and likely saved under a new name.\n" +"Please adjust the post-processing script to change the G-code in place and " +"consult the manual on how to optionally rename the post-processed G-code " +"file.\n" +msgstr "" + +#, possible-boost-format +msgid "" +"The selected 3mf file has been saved with a newer version of %1% and is not " +"compatible." +msgstr "" + +msgid "" +"The selected 3MF contains FDM supports painted object using a newer version " +"of PrusaSlicer and is not compatible." +msgstr "" + +msgid "" +"The selected 3MF contains seam painted object using a newer version of " +"PrusaSlicer and is not compatible." +msgstr "" + +msgid "" +"The selected 3MF contains multi-material painted object using a newer " +"version of PrusaSlicer and is not compatible." +msgstr "" + #: resources/data/hints.ini: [hint:Precise wall] msgid "Precise wall\nDid you know that turning on precise wall can improve precision and layer consistency?" @@ -13851,3 +13998,4 @@ msgstr "" #: resources/data/hints.ini: [hint:Avoid warping] msgid "Avoid warping\nDid you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping." msgstr "" +