diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json index 983e35e558e..00a3485df1c 100644 --- a/resources/profiles/Prusa.json +++ b/resources/profiles/Prusa.json @@ -8,6 +8,10 @@ "name": "MK4IS", "sub_path": "machine/Prusa MK4.json" }, + { + "name": "MINIIS", + "sub_path": "machine/Prusa MINIIS.json" + }, { "name": "MK3S", "sub_path": "machine/Prusa MK3S.json" @@ -26,6 +30,18 @@ "name": "process_common_mk4", "sub_path": "process/process_common_mk4.json" }, + { + "name": "process_common_miniis", + "sub_path": "process/process_common_miniis.json" + }, + { + "name": "process_speed_miniis", + "sub_path": "process/process_speed_miniis.json" + }, + { + "name": "process_detail_miniis", + "sub_path": "process/process_detail_miniis.json" + }, { "name": "process_common_mk3", "sub_path": "process/process_common_mk3.json" @@ -144,6 +160,76 @@ "name": "0.20mm Standard @MK4", "sub_path": "process/0.20mm Standard @MK4.json" }, + { + + "name": "0.05mm Detail @MINIIS", + "sub_path": "process/0.05mm Detail @MINIIS.json" + }, + { + + "name": "0.07mm Detail @MINIIS", + "sub_path": "process/0.07mm Detail @MINIIS.json" + }, + { + + "name": "0.10mm Speed @MINIIS", + "sub_path": "process/0.10mm Speed @MINIIS.json" + }, + { + + "name": "0.12mm Speed @MINIIS", + "sub_path": "process/0.12mm Speed @MINIIS.json" + }, + { + + "name": "0.12mm Standard @MINIIS", + "sub_path": "process/0.12mm Standard @MINIIS.json" + }, + { + + "name": "0.15mm Standard @MINIIS", + "sub_path": "process/0.15mm Standard @MINIIS.json" + }, + { + + "name": "0.15mm Speed @MINIIS", + "sub_path": "process/0.15mm Speed @MINIIS.json" + }, + { + + "name": "0.20mm Standard @MINIIS", + "sub_path": "process/0.20mm Standard @MINIIS.json" + }, + { + + "name": "0.20mm Speed @MINIIS", + "sub_path": "process/0.20mm Speed @MINIIS.json" + }, + { + + "name": "0.25mm Standard @MINIIS", + "sub_path": "process/0.25mm Standard @MINIIS.json" + }, + { + + "name": "0.25mm Speed @MINIIS", + "sub_path": "process/0.25mm Speed @MINIIS.json" + }, + { + + "name": "0.30mm Detail @MINIIS", + "sub_path": "process/0.30mm Detail @MINIIS.json" + }, + { + + "name": "0.35mm Standard @MINIIS", + "sub_path": "process/0.35mm Standard @MINIIS.json" + }, + { + + "name": "0.40mm Standard @MINIIS", + "sub_path": "process/0.40mm Standard @MINIIS.json" + }, { "name": "0.24mm Standard @MK4", @@ -215,6 +301,10 @@ "name": "Prusa Generic PLA @MK4", "sub_path": "filament/Prusa Generic PLA @MK4.json" }, + { + "name": "Prusa Generic PLA @MINIIS", + "sub_path": "filament/Prusa Generic PLA @MINIIS.json" + }, { "name": "Prusa Generic PLA-CF", "sub_path": "filament/Prusa Generic PLA-CF.json" @@ -227,6 +317,10 @@ "name": "Prusa Generic PETG @MK4", "sub_path": "filament/Prusa Generic PETG @MK4.json" }, + { + "name": "Prusa Generic PETG @MINIIS", + "sub_path": "filament/Prusa Generic PETG @MINIIS.json" + }, { "name": "Prusa Generic ABS", "sub_path": "filament/Prusa Generic ABS.json" @@ -235,6 +329,10 @@ "name": "Prusa Generic ABS @MK4", "sub_path": "filament/Prusa Generic ABS @MK4.json" }, + { + "name": "Prusa Generic ABS @MINIIS", + "sub_path": "filament/Prusa Generic ABS @MINIIS.json" + }, { "name": "Prusa Generic TPU", "sub_path": "filament/Prusa Generic TPU.json" @@ -243,6 +341,10 @@ "name": "Prusa Generic TPU @MK4", "sub_path": "filament/Prusa Generic TPU @MK4.json" }, + { + "name": "Prusa Generic TPU @MINIIS", + "sub_path": "filament/Prusa Generic TPU @MINIIS.json" + }, { "name": "Prusa Generic ASA", "sub_path": "filament/Prusa Generic ASA.json" @@ -251,6 +353,10 @@ "name": "Prusa Generic ASA @MK4", "sub_path": "filament/Prusa Generic ASA @MK4.json" }, + { + "name": "Prusa Generic ASA @MINIIS", + "sub_path": "filament/Prusa Generic ASA @MINIIS.json" + }, { "name": "Prusa Generic PC", "sub_path": "filament/Prusa Generic PC.json" @@ -297,6 +403,22 @@ "name": "Prusa MK4 0.4 nozzle", "sub_path": "machine/Prusa MK4 0.4 nozzle.json" }, + { + "name": "Prusa MINIIS 0.4 nozzle", + "sub_path": "machine/Prusa MINIIS 0.4 nozzle.json" + }, + { + "name": "Prusa MINIIS 0.25 nozzle", + "sub_path": "machine/Prusa MINIIS 0.25 nozzle.json" + }, + { + "name": "Prusa MINIIS 0.6 nozzle", + "sub_path": "machine/Prusa MINIIS 0.6 nozzle.json" + }, + { + "name": "Prusa MINIIS 0.8 nozzle", + "sub_path": "machine/Prusa MINIIS 0.8 nozzle.json" + }, { "name": "Prusa MK4 0.6 nozzle", "sub_path": "machine/Prusa MK4 0.6 nozzle.json" diff --git a/resources/profiles/Prusa/MINIIS_cover.png b/resources/profiles/Prusa/MINIIS_cover.png new file mode 100644 index 00000000000..c321e4c5456 Binary files /dev/null and b/resources/profiles/Prusa/MINIIS_cover.png differ diff --git a/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS.json new file mode 100644 index 00000000000..1eae4096954 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic ABS @MINIIS.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "filament_id": "GFB99_2", + "setting_id": "GFSA04", + "name": "Prusa Generic ABS @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs", + "filament_flow_ratio": [ + "0.926" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.6}0.1{elsif nozzle_diameter[0]==0.8}0.07{elsif nozzle_diameter[0]==0.4}0.19{elsif nozzle_diameter[0]==0.25}0.55{else}0{endif}" + ], + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.25 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic ABS @MK4.json b/resources/profiles/Prusa/filament/Prusa Generic ABS @MK4.json index 1e40459111e..0de674b7fea 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic ABS @MK4.json +++ b/resources/profiles/Prusa/filament/Prusa Generic ABS @MK4.json @@ -16,9 +16,9 @@ "; Filament gcode\nM900 K{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp" ], "compatible_printers": [ - "Prusa MK4 0.25 nozzle", - "Prusa MK4 0.4 nozzle", - "Prusa MK4 0.6 nozzle", - "Prusa MK4 0.8 nozzle" - ] + "Prusa MK4 0.25 nozzle", + "Prusa MK4 0.4 nozzle", + "Prusa MK4 0.6 nozzle", + "Prusa MK4 0.8 nozzle" + ] } diff --git a/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS.json new file mode 100644 index 00000000000..a7085464803 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic ASA @MINIIS.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "filament_id": "GFB98_2", + "setting_id": "GFSA04", + "name": "Prusa Generic ASA @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_asa", + "filament_flow_ratio": [ + "0.93" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.6}0.1{elsif nozzle_diameter[0]==0.8}0.07{elsif nozzle_diameter[0]==0.4}0.19{elsif nozzle_diameter[0]==0.25}0.55{else}0{endif}" + ], + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.25 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic ASA @MK4.json b/resources/profiles/Prusa/filament/Prusa Generic ASA @MK4.json index e92dc0795d9..de823b2306f 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic ASA @MK4.json +++ b/resources/profiles/Prusa/filament/Prusa Generic ASA @MK4.json @@ -16,9 +16,9 @@ "; Filament gcode\nM900 K{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp" ], "compatible_printers": [ - "Prusa MK4 0.25 nozzle", - "Prusa MK4 0.4 nozzle", - "Prusa MK4 0.6 nozzle", - "Prusa MK4 0.8 nozzle" - ] + "Prusa MK4 0.25 nozzle", + "Prusa MK4 0.4 nozzle", + "Prusa MK4 0.6 nozzle", + "Prusa MK4 0.8 nozzle" + ] } diff --git a/resources/profiles/Prusa/filament/Prusa Generic PA-CF.json b/resources/profiles/Prusa/filament/Prusa Generic PA-CF.json index 47926d81df7..8b389957c71 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic PA-CF.json +++ b/resources/profiles/Prusa/filament/Prusa Generic PA-CF.json @@ -30,6 +30,10 @@ "Prusa MK4 0.25 nozzle", "Prusa MK4 0.4 nozzle", "Prusa MK4 0.6 nozzle", - "Prusa MK4 0.8 nozzle" + "Prusa MK4 0.8 nozzle", + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.25 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Prusa/filament/Prusa Generic PA.json b/resources/profiles/Prusa/filament/Prusa Generic PA.json index f1507270b5f..c92b0a981e0 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic PA.json +++ b/resources/profiles/Prusa/filament/Prusa Generic PA.json @@ -27,6 +27,10 @@ "Prusa MK4 0.25 nozzle", "Prusa MK4 0.4 nozzle", "Prusa MK4 0.6 nozzle", - "Prusa MK4 0.8 nozzle" + "Prusa MK4 0.8 nozzle", + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.25 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Prusa/filament/Prusa Generic PC.json b/resources/profiles/Prusa/filament/Prusa Generic PC.json index e33173caed1..0c232ec2723 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic PC.json +++ b/resources/profiles/Prusa/filament/Prusa Generic PC.json @@ -24,6 +24,10 @@ "Prusa MK4 0.25 nozzle", "Prusa MK4 0.4 nozzle", "Prusa MK4 0.6 nozzle", - "Prusa MK4 0.8 nozzle" + "Prusa MK4 0.8 nozzle", + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.25 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS.json new file mode 100644 index 00000000000..4f56ee10a41 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PETG @MINIIS.json @@ -0,0 +1,63 @@ +{ + "type": "filament", + "filament_id": "GFG99_1", + "setting_id": "GFSA04", + "name": "Prusa Generic PETG @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet", + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_flow_ratio": [ + "0.95" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "hot_plate_temp": [ + "85" + ], + "hot_plate_temp_initial_layer": [ + "85" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.6}0.22{elsif nozzle_diameter[0]==0.8}0.15{elsif nozzle_diameter[0]==0.4}0.36{elsif nozzle_diameter[0]==0.25}1.02{else}0{endif}" + ], + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.25 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG @MK4.json b/resources/profiles/Prusa/filament/Prusa Generic PETG @MK4.json index 383c86b63f4..9caa793e9f6 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic PETG @MK4.json +++ b/resources/profiles/Prusa/filament/Prusa Generic PETG @MK4.json @@ -43,9 +43,9 @@ "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.035{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.055{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" ], "compatible_printers": [ - "Prusa MK4 0.25 nozzle", - "Prusa MK4 0.4 nozzle", - "Prusa MK4 0.6 nozzle", - "Prusa MK4 0.8 nozzle" - ] + "Prusa MK4 0.25 nozzle", + "Prusa MK4 0.4 nozzle", + "Prusa MK4 0.6 nozzle", + "Prusa MK4 0.8 nozzle" + ] } diff --git a/resources/profiles/Prusa/filament/Prusa Generic PLA @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic PLA @MINIIS.json new file mode 100644 index 00000000000..45ab0c18123 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PLA @MINIIS.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "filament_id": "GFL99_2", + "setting_id": "GFSA04", + "name": "Prusa Generic PLA @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.6}0.17{elsif nozzle_diameter[0]==0.8}0.12{elsif nozzle_diameter[0]==0.4}0.27{elsif nozzle_diameter[0]==0.25}0.85{else}0{endif}" + ], + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.25 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PLA-CF.json b/resources/profiles/Prusa/filament/Prusa Generic PLA-CF.json index a167d5683f0..4461005ad3f 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic PLA-CF.json +++ b/resources/profiles/Prusa/filament/Prusa Generic PLA-CF.json @@ -30,6 +30,10 @@ "Prusa MK4 0.25 nozzle", "Prusa MK4 0.4 nozzle", "Prusa MK4 0.6 nozzle", - "Prusa MK4 0.8 nozzle" + "Prusa MK4 0.8 nozzle", + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.25 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Prusa/filament/Prusa Generic PVA.json b/resources/profiles/Prusa/filament/Prusa Generic PVA.json index 2c0e2017e37..ee80f6c637a 100644 --- a/resources/profiles/Prusa/filament/Prusa Generic PVA.json +++ b/resources/profiles/Prusa/filament/Prusa Generic PVA.json @@ -30,6 +30,10 @@ "Prusa MK4 0.25 nozzle", "Prusa MK4 0.4 nozzle", "Prusa MK4 0.6 nozzle", - "Prusa MK4 0.8 nozzle" + "Prusa MK4 0.8 nozzle", + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.25 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.8 nozzle" ] } diff --git a/resources/profiles/Prusa/filament/Prusa Generic TPU @MINIIS.json b/resources/profiles/Prusa/filament/Prusa Generic TPU @MINIIS.json new file mode 100644 index 00000000000..b79f4ae8702 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic TPU @MINIIS.json @@ -0,0 +1,93 @@ +{ + "type": "filament", + "filament_id": "GFU99_2", + "setting_id": "GFSA04", + "name": "Prusa Generic TPU @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_tpu", + "filament_max_volumetric_speed": [ + "1.35" + ], + "filament_flow_ratio": [ + "1.15" + ], + "filament_start_gcode": [ + "M900 K0 ; Filament gcode" + ], + "hot_plate_temp" : [ + "50" + ], + "hot_plate_temp_initial_layer" : [ + "50" + ], + "filament_type": [ + "FLEX" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature": [ + "210" + ], + "filament_retraction_length": [ + "3" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_deretraction_speed": [ + "16" + ], + "filament_retraction_minimum_travel": [ + "6" + ], + "filament_wipe": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "full_fan_speed_layer": [ + "3" + ], + "fan_min_speed": [ + "30" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "80" + ], + "slow_down_layer_time": [ + "4" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_min_speed": [ + "10" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "overhang_fan_threshold": [ + "50%" + ], + "overhang_fan_speed": [ + "50" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.25 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa MINI 0.25 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINI 0.25 nozzle.json index d047f158bc4..28e2a63c7a0 100644 --- a/resources/profiles/Prusa/machine/Prusa MINI 0.25 nozzle.json +++ b/resources/profiles/Prusa/machine/Prusa MINI 0.25 nozzle.json @@ -15,6 +15,12 @@ "nozzle_diameter": [ "0.25" ], + "max_layer_height": [ + "0.15" + ], + "min_layer_height": [ + "0.05" + ], "bed_exclude_area": [ "0x0" ], diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.25 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.25 nozzle.json new file mode 100644 index 00000000000..97e63d54c0a --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.25 nozzle.json @@ -0,0 +1,30 @@ +{ + "type": "machine", + "setting_id": "GM004", + "name": "Prusa MINIIS 0.25 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Prusa MINIIS 0.4 nozzle", + "gcode_flavor": "marlin2", + "printer_model": "MINIIS", + "printer_variant": "0.25", + "default_filament_profile": [ + "Prusa Generic PLA @MINIIS" + ], + "default_print_profile": "0.12mm Standard @MINIIS", + "nozzle_diameter": [ + "0.25" + ], + "max_layer_height": [ + "0.15" + ], + "min_layer_height": [ + "0.05" + ], + "retraction_length": [ + "2.5" + ], + "retraction_minimum_travel": [ + "1.0" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json new file mode 100644 index 00000000000..2457711175d --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Prusa MINIIS 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_machine_common", + "gcode_flavor": "marlin2", + "printer_model": "MINIIS", + "printer_variant": "0.4", + "default_filament_profile": [ + "Prusa Generic PLA @MINIIS" + ], + "default_print_profile": "0.20mm Standard @MINIIS", + "nozzle_diameter": [ + "0.4" + ], + "bed_exclude_area": [ + "0x0" + ], + "printable_area": [ + "0x0", + "180x0", + "180x180", + "0x180" + ], + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "4000", + "4000" + ], + "machine_max_acceleration_retracting": [ + "1250", + "1250" + ], + "machine_max_acceleration_x": [ + "4000", + "4000" + ], + "machine_max_acceleration_y": [ + "4000", + "4000" + ], + "machine_max_acceleration_z": [ + "400", + "400" + ], + "machine_max_acceleration_travel": [ + "4000", + "4000" + ], + "machine_max_jerk_e": [ + "10", + "2.5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "machine_max_speed_e": [ + "80", + "25" + ], + "machine_max_speed_x": [ + "400", + "400" + ], + "machine_max_speed_y": [ + "400", + "400" + ], + "retraction_length": [ + "2.5" + ], + "retraction_minimum_travel": [ + "1.5" + ], + "retraction_speed": [ + "70" + ], + "deretraction_speed": [ + "40" + ], + "z_hop": [ + "0.2" + ], + "host_type": "prusalink", + "printable_height": "180", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X170 Y170 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM572 S0 ; reset PA\nM569 S1 X Y ; reset to stealthchop for X Y\nM84 ; disable motors\n; max_layer_z = [max_layer_z]", + "machine_pause_gcode": "M601", + "machine_start_gcode": "M862.3 P \"MINI\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM862.5 P2 ; g-code level check\nM862.6 P\"Input shaper\" ; FW feature check\nM115 U5.1.2+13478\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM569 S1 X Y ; set stealthchop for X Y\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\n\nG1 X0 Y-2 Z3 F2400\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X10 Z0.2 F1000\nG1 X70 E8 F900\nG1 X140 E10 F700\nG92 E0\n\nM569 S0 X Y ; set spreadcycle for X Y\nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM572 W0.06 ; set smooth time\nM221 S95 ; set flow", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\nM201 X{interpolate_table(extruded_weight_total, (0,4000), (1000,1700), (10000,1700))} Y{interpolate_table(extruded_weight_total, (0,4000), (1000,1700), (10000,1700))}\n{if ! spiral_mode}M74 W[extruded_weight_total]{endif}\n", + "change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINIIS\nNO_TEMPLATES", + "scan_first_layer": "0", + "machine_load_filament_time": "17", + "machine_unload_filament_time": "16", + "nozzle_type": "brass", + "auxiliary_fan": "0", + "thumbnails": [ + "16x16", + "313x173", + "440x240" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.6 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.6 nozzle.json new file mode 100644 index 00000000000..b3df3dff2bf --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.6 nozzle.json @@ -0,0 +1,30 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "Prusa MINIIS 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Prusa MINIIS 0.4 nozzle", + "gcode_flavor": "marlin2", + "printer_model": "MINIIS", + "printer_variant": "0.6", + "default_filament_profile": [ + "Prusa Generic PLA @MINIIS" + ], + "default_print_profile": "0.25mm Standard @MINIIS", + "nozzle_diameter": [ + "0.6" + ], + "max_layer_height": [ + "0.4" + ], + "min_layer_height": [ + "0.15" + ], + "retraction_length": [ + "2.8" + ], + "retraction_speed": [ + "70" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.8 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.8 nozzle.json new file mode 100644 index 00000000000..c6c0fad3b96 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.8 nozzle.json @@ -0,0 +1,33 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Prusa MINIIS 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "Prusa MINIIS 0.4 nozzle", + "gcode_flavor": "marlin2", + "printer_model": "MINIIS", + "printer_variant": "0.8", + "default_filament_profile": [ + "Prusa Generic PLA @MINIIS" + ], + "default_print_profile": "0.40mm Standard @MINIIS", + "nozzle_diameter": [ + "0.8" + ], + "max_layer_height": [ + "0.55" + ], + "min_layer_height": [ + "0.2" + ] , + "retraction_length": [ + "2.8" + ], + "retraction_speed": [ + "45" + ], + "deretraction_speed": [ + "20" +] +} diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS.json b/resources/profiles/Prusa/machine/Prusa MINIIS.json new file mode 100644 index 00000000000..0786441dcd7 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa MINIIS.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Prusa MINI", + "model_id": "MINI", + "nozzle_diameter": "0.25;0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "Prusa", + "bed_model": "miniis_bed.stl", + "bed_texture": "miniis.svg", + "hotend_model": "", + "default_materials": "Prusa Generic PLA-CF;Prusa Generic PC;Prusa Generic PVA;Prusa Generic PA;Prusa Generic PA-CF;Prusa Generic ABS @MINIIS;Prusa Generic PLA @MINIIS;Prusa Generic PETG @MINIIS;Prusa Generic TPU @MINIIS;Prusa Generic ASA @MINIIS;" +} diff --git a/resources/profiles/Prusa/miniis.svg b/resources/profiles/Prusa/miniis.svg new file mode 100644 index 00000000000..96c8fdec080 --- /dev/null +++ b/resources/profiles/Prusa/miniis.svg @@ -0,0 +1,32 @@ + + MINI_bed_texture + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/resources/profiles/Prusa/miniis_bed.stl b/resources/profiles/Prusa/miniis_bed.stl new file mode 100644 index 00000000000..2f4c45b7b15 Binary files /dev/null and b/resources/profiles/Prusa/miniis_bed.stl differ diff --git a/resources/profiles/Prusa/process/0.05mm Detail @MINIIS.json b/resources/profiles/Prusa/process/0.05mm Detail @MINIIS.json new file mode 100644 index 00000000000..ce05b686628 --- /dev/null +++ b/resources/profiles/Prusa/process/0.05mm Detail @MINIIS.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.05mm Detail @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_detail_miniis", + "layer_height": "0.05", + "initial_layer_print_height": "0.2", + "top_shell_thickness": "0.7", + "top_shell_layers": "13", + "bottom_shell_thickness": "0.5", + "bottom_shell_layers": "10", + "compatible_printers": [ + "Prusa MINIIS 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json b/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json new file mode 100644 index 00000000000..c22b0d24c2a --- /dev/null +++ b/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json @@ -0,0 +1,19 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.07mm Detail @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_detail_miniis", + "layer_height": "0.07", + "initial_layer_print_height": "0.2", + "top_shell_thickness": "0.7", + "top_shell_layers": "10", + "bottom_shell_thickness": "0.5", + "bottom_shell_layers": "8", + "bridge_speed": "30", + "internal_solid_infill_speed": "140", + "compatible_printers": [ + "Prusa MINIIS 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.10mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.10mm Speed @MINIIS.json new file mode 100644 index 00000000000..40076038c97 --- /dev/null +++ b/resources/profiles/Prusa/process/0.10mm Speed @MINIIS.json @@ -0,0 +1,22 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.10mm Speed @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_speed_miniis", + "bridge_speed": "35", + "layer_height": "0.10", + "initial_layer_print_height": "0.2", + "top_shell_thickness": "0.7", + "top_shell_layers": "7", + "bottom_shell_thickness": "0.5", + "bottom_shell_layers": "5", + "sparse_infill_acceleration": "3000", + "internal_solid_infill_acceleration": "3000", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1500", + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json new file mode 100644 index 00000000000..2e77168ac08 --- /dev/null +++ b/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json @@ -0,0 +1,29 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Speed @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_detail_miniis", + "layer_height": "0.12", + "initial_layer_print_height": "0.2", + "top_shell_thickness": "0.7", + "top_shell_layers": "9", + "bottom_shell_thickness": "0.5", + "bottom_shell_layers": "6", + "outer_wall_speed": "120", + "inner_wall_speed": "120", + "small_perimeter_speed": "120", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "140", + "top_surface_speed": "60", + "gap_infill_speed": "50", + "bridge_speed": "25", + "support_speed": "70", + "overhang_1_4_speed": "60", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "2500", + "compatible_printers": [ + "Prusa MINIIS 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json new file mode 100644 index 00000000000..1a2cc016869 --- /dev/null +++ b/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json @@ -0,0 +1,34 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Standard @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_detail_miniis", + "layer_height": "0.12", + "initial_layer_print_height": "0.2", + "top_shell_thickness": "0.7", + "top_shell_layers": "9", + "bottom_shell_thickness": "0.5", + "bottom_shell_layers": "6", + "outer_wall_speed": "70", + "inner_wall_speed": "40", + "small_perimeter_speed": "40", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "140", + "top_surface_speed": "60", + "gap_infill_speed": "50", + "support_speed": "70", + "bridge_speed": "25", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "1000", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "bridge_acceleration": "1500", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "2500", + "travel_acceleration": "3000", + "compatible_printers": [ + "Prusa MINIIS 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.15mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS.json new file mode 100644 index 00000000000..fba5d501b45 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS.json @@ -0,0 +1,28 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Speed @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_detail_miniis", + "layer_height": "0.12", + "initial_layer_print_height": "0.15", + "top_shell_thickness": "0.7", + "top_shell_layers": "5", + "bottom_shell_thickness": "0.5", + "bottom_shell_layers": "4", + "outer_wall_speed": "120", + "inner_wall_speed": "120", + "top_surface_speed": "120", + "sparse_infill_speed": "100", + "bridge_speed": "25", + "internal_solid_infill_speed": "140", + "sparse_infill_acceleration": "2500", + "internal_solid_infill_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1500", + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.25 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS.json new file mode 100644 index 00000000000..d4485f483ca --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS.json @@ -0,0 +1,29 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Standard @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_detail_miniis", + "layer_height": "0.12", + "initial_layer_print_height": "0.15", + "top_shell_thickness": "0.7", + "top_shell_layers": "5", + "bottom_shell_thickness": "0.5", + "bottom_shell_layers": "4", + "outer_wall_speed": "40", + "inner_wall_speed": "70", + "top_surface_speed": "40", + "sparse_infill_speed": "100", + "bridge_speed": "25", + "internal_solid_infill_speed": "140", + "sparse_infill_acceleration": "2500", + "internal_solid_infill_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1500", + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.6 nozzle", + "Prusa MINIIS 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.20mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.20mm Speed @MINIIS.json new file mode 100644 index 00000000000..cf5c7333bb3 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Speed @MINIIS.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Speed @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_speed_miniis", + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.20mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.20mm Standard @MINIIS.json new file mode 100644 index 00000000000..8984d059d1f --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Standard @MINIIS.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_common_miniis", + "compatible_printers": [ + "Prusa MINIIS 0.4 nozzle", + "Prusa MINIIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json new file mode 100644 index 00000000000..1b8cb9efd06 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json @@ -0,0 +1,25 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.25mm Speed @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_speed_miniis", + "layer_height": "0.25", + "initial_layer_print_height": "0.2", + "top_shell_thickness": "0.9", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.6", + "outer_wall_speed": "70", + "inner_wall_speed": "80", + "small_perimeter_speed": "70", + "sparse_infill_speed": "90", + "internal_solid_infill_speed": "80", + "top_surface_speed": "60", + "gap_infill_speed": "60", + "support_speed": "80", + "overhang_1_4_speed": "45", + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json new file mode 100644 index 00000000000..66964b9cf76 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json @@ -0,0 +1,25 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.25mm Standard @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_common_miniis", + "layer_height": "0.25", + "initial_layer_print_height": "0.2", + "top_shell_thickness": "0.9", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.6", + "bottom_shell_layers": "3", + "outer_wall_speed": "45", + "inner_wall_speed": "80", + "small_perimeter_speed": "45", + "sparse_infill_speed": "90", + "internal_solid_infill_speed": "80", + "top_surface_speed": "60", + "gap_infill_speed": "60", + "support_speed": "80", + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json b/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json new file mode 100644 index 00000000000..54fb85f6cd9 --- /dev/null +++ b/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Detail @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_detail_miniis", + "layer_height": "0.3", + "initial_layer_print_height": "0.2", + "top_shell_thickness": "0.7", + "top_shell_layers": "3", + "bottom_shell_thickness": "0.5", + "bottom_shell_layers": "2", + "compatible_printers": [ + "Prusa MINIIS 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json new file mode 100644 index 00000000000..ebc6ffcb3e1 --- /dev/null +++ b/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json @@ -0,0 +1,25 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.35mm Standard @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_common_miniis", + "initial_layer_print_height": "0.2", + "top_shell_thickness": "0.9", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.6", + "bottom_shell_layers": "3", + "outer_wall_speed": "45", + "inner_wall_speed": "60", + "bridge_speed": "30", + "support_speed": "60", + "small_perimeter_speed": "45", + "sparse_infill_speed": "70", + "internal_solid_infill_speed": "60", + "top_surface_speed": "55", + "gap_infill_speed": "45", + "compatible_printers": [ + "Prusa MINIIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json new file mode 100644 index 00000000000..26edf2b36da --- /dev/null +++ b/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.40mm Standard @MINIIS", + "from": "system", + "instantiation": "true", + "inherits": "process_detail_miniis", + "layer_height": "0.4", + "initial_layer_print_height": "0.2", + "top_shell_thickness": "1.2", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.8", + "bottom_shell_layers": "3", + "initial_layer_speed": "30", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "bridge_speed": "22", + "support_speed": "40", + "small_perimeter_speed": "40", + "sparse_infill_speed": "50", + "internal_solid_infill_speed": "40", + "top_surface_speed": "35", + "gap_infill_speed": "35", + "compatible_printers": [ + "Prusa MINIIS 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/fdm_process_common.json b/resources/profiles/Prusa/process/fdm_process_common.json index 8aa6ebf5635..8995061a1dd 100644 --- a/resources/profiles/Prusa/process/fdm_process_common.json +++ b/resources/profiles/Prusa/process/fdm_process_common.json @@ -39,6 +39,7 @@ "reduce_infill_retraction": "1", "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode", "detect_overhang_wall": "1", + "slowdown_for_curled_perimeters": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", @@ -102,6 +103,5 @@ "internal_solid_infill_speed": "150", "top_surface_speed": "50", "gap_infill_speed": "30", - "travel_speed": "200", - "prime_tower_width": "60" -} + "travel_speed": "200" +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/process_common_miniis.json b/resources/profiles/Prusa/process/process_common_miniis.json new file mode 100644 index 00000000000..5416f7915af --- /dev/null +++ b/resources/profiles/Prusa/process/process_common_miniis.json @@ -0,0 +1,54 @@ +{ + "type": "process", + "name": "process_common_miniis", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_common", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "45", + "inner_wall_speed": "80", + "sparse_infill_speed": "115", + "internal_solid_infill_speed": "140", + "top_surface_speed": "80", + "gap_infill_speed": "60", + "travel_speed": "400", + "bridge_speed": "35", + "internal_bridge_speed": "50", + "small_perimeter_speed": "45", + "travel_jerk": "8", + "outer_wall_jerk": "7", + "inner_wall_jerk": "8", + "default_jerk": "8", + "infill_jerk": "8", + "top_surface_jerk": "7", + "initial_layer_jerk": "7", + "default_acceleration": "2000", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "1000", + "travel_acceleration": "4000", + "sparse_infill_acceleration": "4000", + "internal_solid_infill_acceleration": "3000", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1500", + "bridge_acceleration": "1500", + "exclude_object": "1", + "overhang_1_4_speed": "80%", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "15", + "sparse_infill_pattern": "cubic", + "top_shell_thickness": "0.7", + "top_shell_layers": "5", + "bottom_shell_thickness": "0.5", + "bottom_shell_layers": "4", + "elefant_foot_compensation": "0.2", + "slowdown_for_curled_perimeters": "1", + "infill_anchor_max": "12", + "sparse_infill_anchor": "2,5", + "infill_wall_overlap": "10%", + "enable_arc_fitting": "1", + "support_speed": "100", + "precise_outer_wall": "1", + "overhang_reverse": "1" +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/process_detail_miniis.json b/resources/profiles/Prusa/process/process_detail_miniis.json new file mode 100644 index 00000000000..a505444987d --- /dev/null +++ b/resources/profiles/Prusa/process/process_detail_miniis.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "name": "process_detail_miniis", + "from": "system", + "instantiation": "false", + "inherits": "process_common_miniis", + "travel_speed": "300", + "initial_layer_speed": "20", + "outer_wall_speed": "40", + "inner_wall_speed": "60", + "bridge_speed": "25", + "support_speed": "60", + "small_perimeter_speed": "40", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "100", + "top_surface_speed": "60", + "gap_infill_speed": "40", + "default_acceleration": "1500", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "1000", + "inner_wall_acceleration": "1200", + "outer_wall_acceleration": "1000", + "bridge_acceleration": "1000", + "internal_solid_infill_acceleration": "2000", + "sparse_infill_acceleration": "2000", + "travel_acceleration": "3000" +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/process_speed_miniis.json b/resources/profiles/Prusa/process/process_speed_miniis.json new file mode 100644 index 00000000000..9822e2ac1f1 --- /dev/null +++ b/resources/profiles/Prusa/process/process_speed_miniis.json @@ -0,0 +1,21 @@ +{ + "type": "process", + "name": "process_speed_miniis", + "from": "system", + "instantiation": "false", + "inherits": "process_common_miniis", + "outer_wall_speed": "140", + "inner_wall_speed": "140", + "small_perimeter_speed": "140", + "sparse_infill_speed": "140", + "internal_solid_infill_speed": "140", + "top_surface_speed": "80", + "gap_infill_speed": "80", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "1000", + "inner_wall_acceleration": "2500", + "outer_wall_acceleration": "2000", + "bridge_acceleration": "1500", + "internal_solid_infill_acceleration": "4000", + "overhang_1_4_speed": "60" +} \ No newline at end of file