From c161a0376955b79bf85823922d82a630d6f9773a Mon Sep 17 00:00:00 2001
From: Rubberazer <47650457+Rubberazer@users.noreply.github.com>
Date: Mon, 1 Jul 2024 00:12:19 +0200
Subject: [PATCH] adding Zig examples

---
 EXAMPLES_Zig/spi_loop.zig | 69 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 EXAMPLES_Zig/spi_loop.zig

diff --git a/EXAMPLES_Zig/spi_loop.zig b/EXAMPLES_Zig/spi_loop.zig
new file mode 100644
index 0000000..65a2d3d
--- /dev/null
+++ b/EXAMPLES_Zig/spi_loop.zig
@@ -0,0 +1,69 @@
+// Usage example of the JETGPIO library
+// Compile with: zig build-exe spi_loop.zig -ljetgpio -lc
+// Execute with: sudo ./spi_loop
+
+const std = @import("std");
+const jetgpio = @cImport({
+    @cInclude("jetgpio.h");
+});
+
+pub fn main() !void {
+    const txc = [_]u8{ 0xff, 0xaa, 0xbb, 0xcc, 0xdd, 0xff, 0x11 };
+    const tx = &txc;
+    var rxc = [_]u8{ 0, 0, 0, 0, 0, 0, 0 };
+    var rx = &rxc;
+    const init = jetgpio.gpioInitialise();
+    if (init < 0) {
+        std.debug.print("Error initiating jetgpio\n", .{});
+    }
+
+    //Port SPI2 pins: 37, 22, 13 & 18
+    //to perform a simple loop test, pins 22: SPI2_MISO & 37:SPI2_MOSI should be connected
+    //with a short jumper cable, when the cable is disconnected the output on screen will show
+    //all the rx values as zeros
+    //spiOpen() parameters go as follows: spiOpen(port number, speed in Hz, mode, cs pin delay in us,
+    //bits per word, least significant bit first, cs change)
+
+    const spiInit = jetgpio.spiOpen(1, 5000000, 0, 0, 8, 1, 1);
+    if (spiInit < 0) {
+        std.debug.print("Port SPI2 opening failed. Error code: {}\n", .{spiInit});
+    } else {
+        std.debug.print("Port SPI2 opened OK. Return code: {}\n", .{spiInit});
+    }
+
+    //Transfer data
+    var i: i8 = 0;
+    while (i < 20) {
+        // Here some weird casting, expected something more straightforward but...oh, well, very strict type control and all that
+        // also, this is interacting with a C abi after all! more than good enough
+        const set2 = jetgpio.spiXfer(@intCast(spiInit), @constCast(tx.ptr), rx.ptr, 7);
+        if (set2 < 0) {
+            std.debug.print("Spi transfer failed. Error code: {}\n", .{set2});
+        } else {
+            std.debug.print("Spi transfer OK. Return code: {}\n", .{set2});
+        }
+
+        std.debug.print("tx0:{x} --> rx0:{x}\n", .{ tx[0], rx[0] });
+        std.debug.print("tx1:{x} --> rx1:{x}\n", .{ tx[1], rx[1] });
+        std.debug.print("tx2:{x} --> rx2:{x}\n", .{ tx[2], rx[2] });
+        std.debug.print("tx3:{x} --> rx3:{x}\n", .{ tx[3], rx[3] });
+        std.debug.print("tx4:{x} --> rx4:{x}\n", .{ tx[4], rx[4] });
+        std.debug.print("tx5:{x} --> rx5:{x}\n", .{ tx[5], rx[5] });
+        std.debug.print("tx6:{x} --> rx6:{x}\n", .{ tx[6], rx[6] });
+
+        rx[0] = 0;
+        rx[1] = 0;
+        rx[2] = 0;
+        rx[3] = 0;
+        rx[4] = 0;
+        rx[5] = 0;
+        rx[6] = 0;
+
+        i += 1;
+        std.time.sleep(1000000000);
+    }
+
+    // Closing spi port
+    _ = jetgpio.spiClose(@intCast(spiInit));
+    jetgpio.gpioTerminate();
+}