Example R scripts to create a dose-response curve and extract ECX-values.
Before the fun-part of dose-response modelling, a handful of add-on
packages have to be installed. tidyverse and readxl provide
functionalities for easy data handling and reading straight from .xlsx
files, respectively. drc is used to perform dose-response modelling,
and lmtest and sandwich provide additional functionalities for
standard error and confidence interval estimations.
install.packages(c("tidyverse", "multcomp", "drc", "lmtest", "sandwich"))After succesful installation, the packages need to be loaded by using
the library() functionality.
library(multcomp)
library(tidyverse)
library(readxl)
library(drc)
library(lmtest)
library(sandwich)We are now ready to load the data!
First, we load the raw data and inspect it.
data <- read_xlsx(path = "Data/Diuron_DRC_Data_RevLee.xlsx", sheet = "Summary") %>%
select(-SampleName, -Replicate) %>%
rename(Concentration = concentration,
Fronds_number_inhibition = FN_Normalization_PERCENT,
Frond_size_inhibition = FS_Normalization_PERCENT,
Photosystem_II_inhibition = PSII_Normalization_PERCENT,
ROS_formation = `ROS_Formation_Fold increase`,
Chlorophyll_A_inhibition = `Chlorophyll a_inhibition_PERCENT`,
Chlorophyll_B_inhibition = `Chlorophyll b_inhibition_PERCENT`,
Carotenoids_inhibition = Carotenoids_inhibition_PERCENT) %>%
filter(!str_detect(Note, "CT")) %>%
select(-Note)
data## # A tibble: 18 x 8
## Concentration Fronds_number_i~ Frond_size_inhi~ Photosystem_II_~
## <dbl> <dbl> <dbl> <dbl>
## 1 0 8.40 18.4 -1.75
## 2 0.01 14.0 60.8 21.0
## 3 0.03 32.8 86.3 77.7
## 4 0.1 84.9 80.2 86.8
## 5 0.3 84.9 121. 87.9
## 6 1 106. 105. 100
## 7 0 -1.53 -2.73 -1.18
## 8 0.01 15.6 -25.3 21.3
## 9 0.03 36.6 8.98 58.2
## 10 0.1 77.3 111. 87.1
## 11 0.3 74.0 75.4 75.3
## 12 1 99.7 98.8 100
## 13 0 5.23 17.0 -2.46
## 14 0.01 8.40 -12.0 23.1
## 15 0.03 31.7 16.9 51.0
## 16 0.1 70.9 77.0 87.1
## 17 0.3 89.3 127. 100
## 18 1 94.2 95.9 100
## # ... with 4 more variables: ROS_formation <dbl>,
## # Chlorophyll_A_inhibition <dbl>, Chlorophyll_B_inhibition <dbl>,
## # Carotenoids_inhibition <dbl>
Let’s take a look at the reproduction along the stressor gradient. Note that this plot is meant to help you understand the data, and is not part of your reports!
data %>%
ggplot() +
geom_point(mapping = aes(x = Concentration, y = Fronds_number_inhibition), size = 2, alpha = 0.5) +
labs(x = "Diuron (mg/L)",
y = "Fronds number inhibition (%)") +
theme_light()
Based on the figure of the raw data, we can see that there is a strong decreasing trend in reproduction with increasing Concentration. To find out statistically significant differences, we need to run a ANOVA with Dunnett’s post hoc test.
In the first step, we have to transfrom the Concentration from a
numeric column to a (categorical) factor column; otherwise it is not
possible to run a post hoc analysis. This happens inside the
mutate() function. In the next step, we run a ANOVA. But instead of
using a convenience function, we do it more manual, by fitting a linear
model using lm(). Note that a ANOVA is nothing else than a linear
model. Within the linear model, the contrast treatment specifies that
Concentration "0" contains the control values. The linear model is
then used in a generalized linear hypothesis test with the glht()
function. Inside this function, the multiple comparison is set to
Dunnett’s contrasts (everything vs. the control), and
variance-covariance matrix is updated using the sandwich estimator. In
the final step, the p-values are adjusted for multiple comparisons
using Holm’s method.
data %>%
mutate(Concentration = fct_relevel(as.character(Concentration), "0")) %>%
lm(formula = Fronds_number_inhibition ~ Concentration, data = ., contrasts = list(Concentration = "contr.treatment")) %>%
glht(linfct = mcp(Concentration = "Dunnett"), vcov = sandwich) %>%
summary(test = adjusted(type = "holm"))##
## Simultaneous Tests for General Linear Hypotheses
##
## Multiple Comparisons of Means: Dunnett Contrasts
##
##
## Fit: lm(formula = Fronds_number_inhibition ~ Concentration, data = .,
## contrasts = list(Concentration = "contr.treatment"))
##
## Linear Hypotheses:
## Estimate Std. Error t value Pr(>|t|)
## 0.01 - 0 == 0 8.643 2.982 2.898 0.0134 *
## 0.03 - 0 == 0 29.646 2.677 11.075 2.35e-07 ***
## 0.1 - 0 == 0 73.671 4.074 18.081 1.81e-09 ***
## 0.3 - 0 == 0 78.683 4.413 17.829 1.81e-09 ***
## 1 - 0 == 0 95.966 3.697 25.958 3.26e-11 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## (Adjusted p values reported -- holm method)
From the results we can deduce that the LOEC has a concentration of 0.01 mg/L. As this is the lowest treatment concentration, the NOEC has to be < 0.01 mg/L.
From the visualization of the raw data, we see a very clear monotonic
dose-response pattern! Let’s fit a four-parametric log-logistic model
using the drc package. We then take a look at the results (i.e., the
four parameters, or coefficients) using coeftest with adjusted
variance-covariance matrix.
fronds_number_inhibition.drm <- data %>%
drm(formula = Fronds_number_inhibition ~ Concentration, data = .,
fct = LL.4(names = c("Slope", "Lower Limit", "Upper Limit", "EC50")))
fronds_number_inhibition.drm %>%
coeftest(vcov. = sandwich)##
## t test of coefficients:
##
## Estimate Std. Error t value Pr(>|t|)
## Slope:(Intercept) -1.5074985 0.3205381 -4.7030 0.0003392 ***
## Lower Limit:(Intercept) 3.9154197 2.4254658 1.6143 0.1287686
## Upper Limit:(Intercept) 95.8043675 4.9639031 19.3002 1.742e-11 ***
## EC50:(Intercept) 0.0463548 0.0057536 8.0567 1.261e-06 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
The fitted values for the parameters seem to make sense. The lower and upper limit are in accordance with what we observe in the raw data, and the EC50 value is also realistic.
Let’s take a look at the corrected parameter estimates and the EC5, EC10, and EC50 values with 95% confidence limits.
fronds_number_inhibition.drm %>%
ED(respLev = c(5, 10, 50), interval = "delta", vcov. = sandwich)##
## Estimated effective doses
##
## Estimate Std. Error Lower Upper
## e:1:5 0.0065740 0.0022098 0.0018345 0.0113136
## e:1:10 0.0107919 0.0025439 0.0053358 0.0162479
## e:1:50 0.0463548 0.0057536 0.0340146 0.0586950
Now that we got all necessary information, let’s plot the dose-response
curve. This is not straight forward, as it requires advanced use of
the predict() function, so feel free to copy-paste.
data.frame(Concentration = seq(from = min(data$Concentration),
to = max(data$Concentration),
length.out = 1000)) %>%
mutate(fit = predict(fronds_number_inhibition.drm, newdata = .),
lwr = predict(fronds_number_inhibition.drm, newdata = ., interval = "confidence", vcov. = sandwich)[, 2],
upr = predict(fronds_number_inhibition.drm, newdata = ., interval = "confidence", vcov. = sandwich)[, 3]) %>%
ggplot() +
geom_ribbon(mapping = aes(x = Concentration, ymin = lwr, ymax = upr), alpha = 0.2) +
geom_line(mapping = aes(x = Concentration, y = fit), size = 1) +
geom_point(mapping = aes(x = Concentration, y = Fronds_number_inhibition), data = data, size = 2, alpha = 0.5) +
labs(x = "Diuron (mg/L)",
y = "Fronds number inhibition (%)") +
theme_light()
Looks good, so let’s save the plot.
ggsave("Figures/Fronds number inhibition.png", height = 5.25, width = 7, units = "in", dpi = 600, type = "cairo-png")