Sample RISC-V Libero projects for the SmartFusion2 (M2S090) Security Evaluation Kit.
This project contains Libero projects containing FPGA designs including a RISC-V RV32IM soft processor. Programming bitstreams are also included so you don't have to run through the full FPGA design flow in order to start developing software for RISC-V.
The FPGA Designs include the following features
- CoreRISCV_AXI4 RV32IM RISC-V processor
- RISC-V debug block allowing on-target debug using openocd/GDB
- On-chip NVM used as boot/execution memory
- LPDDR memory for code/data
- User peripherals such as GPIO, Timers, UART
The memory map for each design is available within each Libero project.
Details of the features available for the SmartFusion2 (M2S090) Security Evaluation Kit are available here.
The Programming_The_Target_Device folder includes FlashPro Express projects that can be used to program the development boards A standalone installer for FlashPro Express is available here . Please note that you only need to install this standalone version of FlashPro Express if you do not have Libero tools installed.
- PROC_SUBSYSTEM_BaseDesign, contains a simple RISCV design which allows users to use basic peripherals such as GPIO, UART and Timers.
The Modify_The_FPGA_Design folder contains Libero example designs. Libero is Microsemi's FPGA design tool. You will need this tool if you wish to modify the example FPGA designs. Libero is available from here.
A set of RISC-V example software projects are also available for these designs from the SoftConsole page.