advanced_readme.md

Interactive Mode

You may run the flow interactively by using the -interactive option:

./flow.tcl -interactive

A tcl shell will be opened where the openlane package is automatically sourced:

% package require openlane 0.9

Then, you should be able to run the following commands:

0. Any tcl command.
1. prep -design <design> -tag <tag> -config <config> -init_design_config -overwrite similar to the command line arguments, design is required and the rest is optional
2. run_synthesis
3. run_floorplan
4. run_placement
5. run_cts
6. gen_pdn
7. run_routing
8. run_magic
9. run_magic_spice_export
10. run_magic_drc
11. run_lvs
12. run_magic_antenna_check

The above commands can also be written in a file and passed to flow.tcl:

./flow.tcl -interactive -file <file>

A more detailed list of all the commands supported by openlane could be found here.

Note 1: Currently, configuration variables have higher priority over the above commands so if RUN_MAGIC is 0, command run_magic will have no effect.

Note 2: Currently, all these commands must be run in the flow sequence and no steps should be skipped.

Note 3: You can pass the -design, -tag, etc.. flags to ./flow.tcl -interactive directly without the need of entering the interactive mode and then executing the prep command.