From a23be543d2130c21077d4b3b66a507521e0b2682 Mon Sep 17 00:00:00 2001 From: Laine Walker-Avina Date: Wed, 2 Jul 2014 20:40:37 -0700 Subject: [PATCH] Update config for Metal Simple (Model 1403) --- Marlin/Configuration.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index e4453b5bb5f7..5ae96b579382 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -290,12 +290,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o #define DISABLE_Z true #define DISABLE_E false // For all extruders -#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true +#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR true // for Mendel set to true, for Orca set to false -#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true -#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false -#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false -#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true +#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E2_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false // ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN @@ -307,11 +307,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o #define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below. // Travel limits after homing -#define X_MAX_POS_DEFAULT 152.4 +#define X_MAX_POS_DEFAULT 150 #define X_MIN_POS_DEFAULT 0 -#define Y_MAX_POS_DEFAULT 152.4 +#define Y_MAX_POS_DEFAULT 150 #define Y_MIN_POS_DEFAULT 0 -#define Z_MAX_POS_DEFAULT 152.4 +#define Z_MAX_POS_DEFAULT 150 #define Z_MIN_POS_DEFAULT 0 #define X_MAX_LENGTH (base_max_pos[0] - base_min_pos[0]) @@ -395,7 +395,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o // default settings -#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,2020,96} +#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,2020,94.5} #define DEFAULT_MAX_FEEDRATE {100, 100, 2, 14} // (mm/sec) #define DEFAULT_MAX_ACCELERATION {2000,2000,30,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.