Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
mtd: rawnand: fsmc: Keep bank enable bit set
Hammering the "bank enable" (PBKEN) bit on and off between every command crashes the Nomadik NHK15 with this message: Scanning device for bad blocks Unhandled fault: external abort on non-linefetch (0x008) at 0xcc95e000 pgd = (ptrval) [cc95e000] *pgd=0b808811, *pte=40000653, *ppte=40000552 Internal error: : 8 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.20.0-rc2+ MIPS#72 Hardware name: Nomadik STn8815 PC is at fsmc_exec_op+0x194/0x204 (...) After a discussion we (me and Boris Brezillon) start to suspect that this bit does not immediately control the chip select line at all, it rather enables access to the bank and the hardware will drive the CS autonomously. If there is a NAND chip connected, we should keep this enabled. As fsmc_nand_setup() sets this bit, we can simply remove the offending code. Fixes: 550b9fc ("mtd: rawnand: fsmc: Stop implementing ->select_chip()") Signed-off-by: Linus Walleij <[email protected]> Acked-by: Miquel Raynal <[email protected]> Signed-off-by: Boris Brezillon <[email protected]>
- Loading branch information