Skip to content

Software Setup

Jump to bottom
John edited this page Mar 11, 2019 · 27 revisions

This page details the software setup required to run JetBot.

Jetson Nano setup

Follow these steps to set up your Jetson Nano with all of the required JetBot software.

Booting Jetson Nano

  1. Download the zip archieve of JetBot SD card image, jetbot_image_v0p3p0.zip

  2. Insert a 64GB+ SD card into your desktop machine

  3. Using Etcher, select jetbot_image_v0p3p0.zip to flash the image to the SD card

  4. Remove the SD card from your desktop machine

  5. Insert the SD card into your Jetson Nano (the micro SD card slot is located under the module)

  6. Connect the monitor, keyboard, and mouse to the Nano

  7. Power on the Jetson Nano by connecting the micro USB charger to the micro USB port

Congratulations! Your Jetson Nano should now boot and present the Ubuntu login screen! Now you'll need to connect to the WiFi and optionally update the JetBot software.

Connecting to WiFi

  1. Log into the jetbot user using the password jetbot

  2. Connect to a WiFi network using the Ubuntu desktop GUI

Your Jetson Nano should now automatically connect to the WiFi at boot and display it's IP address on the piOLED display.

Connecting to your robot from a web browser

Now that your Jetson Nano WiFi is configured, you're able to program your robot from a web browser on the same network! This means that you shouldn't need to connect your robot to a monitor past this step!

  1. Unplug your HDMI monitor, USB keyboard, and mouse from Jetson Nano.

  2. Check the IP address of your robot on the piOLED display screen. Enter this in place of <jetbot_ip_address> in the next command

  3. Navigate to http://<jetbot_ip_address>:8888

You should see the Jupyter Lab web programming environment load with a file browser, editor, and other tools. Jupyter Lab is a web based programming that enables the following

  • File browsing and editing

  • Execution of Jupyter Notebooks, which mix text descriptions, executable code cells and graphics displays in a single hybrid document!

  • File upload and downloading from your computer

Right above the file browser on the left size you should see a + icon. This enables you to launch notebooks, interactive Python programming shells, text editors, or a terminals.

Installing latest software (optional)

The software for controlling JetBot and accessing the camera is contained in the jetbot Git repository.

In case you're unfamiliar, Git is a tool maintaining and co-developing software. A Git repository is a collection of files with an entire history of all changes, so if we ever make a mistake we can easily go back! It also has lots of other tools that make it easy to work on the same content with other people.

As a convenience, we pre-install this repository on the SD card image you downloaded to the path /home/jetbot/jetbot.
However, JetBot is a growing project that is rapidly evolving, with new examples and capabilities. The SD card image you have may not have the latest and greatest. To get the most up to date software, we can use the Git tool from the linux terminal. Use the Jupyter Lab Launcher to launch a terminal. You'll be presented with a prompt to enter commands, enter the following in sequence.

Pull the latest git repository

git clone https://github.com/NVIDIA-AI-IOT-private/jetbot

Re-install the jetbot Python package.

cd jetbot
sudo python3 setup.py install

Then, you'll need to copy the example notebooks to the directory ~/Notebooks (or a directory of your choosing).

mkdir ~/Notebooks
cp jetbot/notebooks/robot/* ~/Notebooks/

If the Notebooks directory already exists (which it probably does), you can remove it with the following command rm -rf /home/jetbot/Notebooks and then try re-calling the above command.

You should now have the latest software installed and ready to use!

Configuring power mode

To ensure that the Jetson Nano doesn't draw more current than the battery pack can supply, place the Jetson Nano in 5W mode by calling the following command

sudo nvpmodel -m1

Training machine setup

If you just want to test the robot, or use the pre-trained models, you can skip this step.

Some of the examples require a separate machine for training the neural networks. Training is a very computationally intensive task that requires a GPU machine to iterative over lots of data samples.

To run the training examples, you'll need a GPU enabled desktop or cloud instance with PyTorch installed. We provide different solutions for setting up a training environment below.

NVIDIA Deep Learning Institute

As a convenience, we provide the JetBot training notebooks in a pre-configured container that can be launched through the NVIDIA Deep Learning Institute (DLI) infrastructure. Once you've signed up, launching the training Jupyter Lab environment just takes a few clicks. This makes it very easy to get started with training neural networks even if you don't have a local GPU system on hand.

Next

Follow the examples to start programming JetBot and learning AI!

Analytics

Clone this wiki locally