From 00d5c886ba9d5c28f7158d1d091ab1fb8ec96f14 Mon Sep 17 00:00:00 2001
From: Mirage <olivier_rt@hotmail.com>
Date: Wed, 1 Nov 2023 11:50:26 -0400
Subject: [PATCH] Update OctopusPro V1.1

Difference between Octopus Pro V1.0 and V1.1 managed via line selection (uncomment selection)
---
 .../klipper/OctopusProTMC5160_printer.cfg     | 68 ++++++++++++-------
 1 file changed, 43 insertions(+), 25 deletions(-)

diff --git a/firmware/klipper/OctopusProTMC5160_printer.cfg b/firmware/klipper/OctopusProTMC5160_printer.cfg
index 4f6e5a32..b6095249 100644
--- a/firmware/klipper/OctopusProTMC5160_printer.cfg
+++ b/firmware/klipper/OctopusProTMC5160_printer.cfg
@@ -4,27 +4,32 @@
 # This file contains example configuration for Klipper running on: #
 #                                                                  #
 # PRINTER: HevORT 315*315*340                                      #
-# CONTROL_BOARD: OctopusPro V1.0 RefDoc: https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-Pro #                       #
+# CONTROL_BOARD: OctopusPro V1.0 or V1.1                           #
+#   RefDoc: https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-Pro #
+#   OctopusPro V1.0 vs V1.1: https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-Pro#changes-in-v11-compared-to-v10 # 
+#                                                                  #
 # OPTIONS: a) 48V on X,Y,E using BTT HV5160                        #
 #          b) HevACS                                               #
 #                                                                  #
 # Config example created by:                                       #
 # Date: MirageC Feb 1st, 2022                                      #
+# Last Updated: Nov 1st, 2023                                      #
 ####################################################################
 
 ################## CONTROL BOARD PIN DEFINITION ####################
-#  ______________________________________________________________
-# | DRIVE | STEP pin | DIR pin  | EN pin   | CS PIN   | END_STOP |
-# |-------|----------|----------|----------|----------|----------|
-# | 0     | PF13     | PF12     | PF14     | PC4      | PG6      |
-# | 1     | PG0      | PG1      | PF15     | PD11     | PG9      |
-# | 2.1&2 | PF11     | PG3      | PG5      | PC6      | PG10     |
-# | 3     | PG4      | PC1      | PA0      | PC7      | PG11     |
-# | 4     | PF9      | PF10     | PG2      | PF2      | PG12     |
-# | 5     | PC13     | PF0      | PF1      | PE4      | PD13     |
-# | 6     | PE2      | PE3      | PD4      | PE1      | PD14     |
-# | 7     | PE6      | PA14     | PE0      | PD3      | PD15     |
-# |_______|__________|__________|__________|__________|__________|
+#  __________________________________________________________________
+# | DRIVE     | STEP pin | DIR pin  | EN pin   | CS PIN   | END_STOP |
+# |-----------|----------|----------|----------|----------|----------|
+# | 0         | PF13     | PF12     | PF14     | PC4      | PG6      |
+# | 1         | PG0      | PG1      | PF15     | PD11     | PG9      |
+# | 2.1&2     | PF11     | PG3      | PG5      | PC6      | PG10     |
+# | 3 on V1.0 | PG4      | PC1      | 1.0: PA0 | PC7      | PG11     | 
+# | 3 on V1.1 | Same     | Same     | 1.1: PA2 | Same     | Same     | 
+# | 4         | PF9      | PF10     | PG2      | PF2      | PG12     |
+# | 5         | PC13     | PF0      | PF1      | PE4      | PD13     |
+# | 6         | PE2      | PE3      | PD4      | PE1      | PD14     |
+# | 7         | PE6      | PA14     | PE0      | PD3      | PD15     |
+# |___________|__________|__________|__________|__________|__________|
 #  ___________________ 
 # | FAN   |    PIN    |
 # |-------|-----------|
@@ -37,15 +42,17 @@
 # | FAN6  | ALWAYS_ON |
 # | FAN7  | ALWAYS_ON |
 # | ______|___________|
-#  ________________________________
-# | HEATER |  HEAT pin |  TEMP pin |
-# |--------|-----------|-----------|
-# | BED    | PA1       | (TB) PF3  |
-# | HE0    | PA2       | (TO) PF4  |
-# | HE1    | PA3       | (T1) PF5  |
-# | HE2    | PB10      | (T2) PF6  |
-# | HE3    | PB11      | (T3) PF7  |
-# |________|___________|___________|
+#  _____________________________________
+# | HEATER      |  HEAT pin |  TEMP pin |
+# |-------------|-----------|-----------|
+# | BED         | PA1       | (TB) PF3  |
+# | HE0 on V1.0 | 1.0: PA2  | (TO) PF4  |
+# | HE0 on V1.1 | 1.1: PA0  | Same      |
+# | HE1         | PA3       | (T1) PF5  |
+# | HE2 on V1.0 | V1.0 PB10 | (T2) PF6  |
+# | HE2 on V1.1	| V1.1: PB0 | Same      |
+# | HE3         | PB11      | (T3) PF7  |
+# |_____________|___________|___________|
 #  _________________
 # | SPI    | PIN    |
 # |--------|--------|
@@ -54,7 +61,12 @@
 # | SCK    | PA5    |
 # |________|________|
 
-
+#  _________________
+# | RGB    | PIN    |
+# |--------|--------|
+# | V1.0   | PB0    |
+# | V1.1   | PB10   |
+# |________|________|
 
 ####################################################################
 ############################ MCU ###################################
@@ -173,7 +185,10 @@ run_current: 1.2
 [stepper_z1]          
 step_pin: PG4
 dir_pin: !PC1
-enable_pin: !PA0
+# # BOARD VERSION SELECTION - UNCOMMENT ACCORDING TO YOUR BOARD #
+#enable_pin: !PA0 #Drive 3 on OctopusPro V1.0
+#enable_pin: !PA2 #Drive 3 on OctopusPro V1.1
+
 microsteps: 128
 rotation_distance: 4 				
 full_steps_per_rotation: 400
@@ -279,7 +294,10 @@ rotation_distance: 4.52
 nozzle_diameter: 0.500
 filament_diameter: 1.750
 #____________________#### HEATER NOZZLE on HE0 ####_________________
-heater_pin: PA2
+# # BOARD VERSION SELECTION - UNCOMMENT ACCORDING TO YOUR BOARD #
+#heater_pin: PA2 #Extruder Heater(HE0) on OctopusPro V1.0
+#heater_pin: PB10 #Extruder Heater(HE0) on OctopusPro V1.1
+
 #_________________________NOZZLE TEMP _____________________________
 sensor_type: ATC Semitec 104NT-4-R025H42G
 sensor_pin: PF4