dhall-haskell

You will probably want to read the language-agnostic README here:

• dhall-lang README

This repository focuses on the Haskell bindings to Dhall and contains the following packages:

• dhall -
• dhall-bash -
• dhall-json -
• dhall-yaml -
• dhall-nix -
• dhall-lsp-server -
• dhall-docs -
• dhall-toml -
• dhall-csv -

Navigate to each package's directory for their respective READMEs

Pre-built binaries

You can download pre-built binaries for Windows, OS X and Linux on the release page:

• dhall-haskell - Releases

You can also install binaries for OS X using brew, like this:

$ brew install dhall-json

You can also install pre-built Linux binaries for master using Nix using Nix's channel mechanism by following the instructions at this link:

• https://hydra.dhall-lang.org/jobset/dhall-haskell/master/channel/latest

To install the Nix build products without a channel, configure your machine to use cache.dhall-lang.org, as described in the nix section and then visit one of the following links:

• https://hydra.dhall-lang.org/job/dhall-haskell/master/linux-dhall/latest
• https://hydra.dhall-lang.org/job/dhall-haskell/master/linux-dhall-bash/latest
• https://hydra.dhall-lang.org/job/dhall-haskell/master/linux-dhall-json/latest
• https://hydra.dhall-lang.org/job/dhall-haskell/master/linux-dhall-yaml/latest
• https://hydra.dhall-lang.org/job/dhall-haskell/master/linux-dhall-nix/latest
• https://hydra.dhall-lang.org/job/dhall-haskell/master/linux-dhall-lsp-server/latest
• https://hydra.dhall-lang.org/job/dhall-haskell/master/linux-dhall-docs/latest
• https://hydra.dhall-lang.org/job/dhall-haskell/master/linux-dhall-toml/latest
• https://hydra.dhall-lang.org/job/dhall-haskell/master/linux-dhall-csv/latest

You can then click the "Help" button in the bottom right corner, which will show you a nix-env command that you can run to install the prebuilt executable.

If you have the jq command-line tool installed then you can do this in one command by running:

$ nix-env -i "$(curl -L https://hydra.dhall-lang.org/job/dhall-haskell/master/linux-dhall/latest/api/get-info | jq -r .outPath)"

These instructions also work for any pull request, too, by replacing master with the pull request number for any of the above URLs.

Pre-built containers

Prebuilt containers for the latest release available from Docker Hub:

• Docker Hub - dhallhaskell

... but if you want to obtain containers for bleeding-edge builds, you can download image archives for each package using the following URLs:

• https://hydra.dhall-lang.org/job/dhall-haskell/master/image-dhall/latest/download/1/docker-image-dhall.tar.gz
• https://hydra.dhall-lang.org/job/dhall-haskell/master/image-dhall-bash/latest/download/1/docker-image-dhall-bash.tar.gz
• https://hydra.dhall-lang.org/job/dhall-haskell/master/image-dhall-json/latest/download/1/docker-image-dhall-json.tar.gz
• https://hydra.dhall-lang.org/job/dhall-haskell/master/image-dhall-yaml/latest/download/1/docker-image-dhall-yaml.tar.gz
• https://hydra.dhall-lang.org/job/dhall-haskell/master/image-dhall-lsp-server/latest/download/1/docker-image-dhall-lsp-server.tar.gz
• https://hydra.dhall-lang.org/job/dhall-haskell/master/image-dhall-nix/latest/download/1/docker-image-dhall-nix.tar.gz
• https://hydra.dhall-lang.org/job/dhall-haskell/master/image-dhall-docs/latest/download/1/docker-image-dhall-docs.tar.gz
• https://hydra.dhall-lang.org/job/dhall-haskell/master/image-dhall-toml/latest/download/1/docker-image-dhall-toml.tar.gz
• https://hydra.dhall-lang.org/job/dhall-haskell/master/image-dhall-csv/latest/download/1/docker-image-dhall-csv.tar.gz

You can then load and run one of these archives like so:

$ NAME="dhall"

$ curl --location --remote-name "https://hydra.dhall-lang.org/job/dhall-haskell/master/image-${NAME}/latest/download/1/docker-image-${NAME}.tar.gz"

$ docker load < "docker-image-${NAME}.tar.gz"
...
Loaded image: dhall:vx95jiijmp2i07f5ynl8h6sllf34jggz

$ docker run --interactive --rm dhall:vx95jiijmp2i07f5ynl8h6sllf34jggz dhall <<< '2 + 2'
4

These instructions also work for any pull request, too, by replacing master with the pull request number for any of the above URLs.

Building from source

For all of the following instructions, make sure to first check out the dhall-lang submodule:

$ git submodule init
$ git submodule update

cabal

You can build all of the packages by running:

$ cabal new-build all

And each of them with cabal new-build <package-name>, for example:

$ cabal new-build dhall

... or you can run cabal new-build within each package directory.

nix

You will probably want to use the shared caches hosted at cache.dhall-lang.org and dhall.cachix.org when doing Nix development. This is not required, but this will save you a lot of time so that you don't have to build as many dependencies from scratch the first time.

If your operating system is NixOS then you can add the cache using these NixOS configuration options to access dhall packages from your declarative configuration file:

  nix = {
    binaryCaches = [
      "https://cache.nixos.org"
      "https://cache.dhall-lang.org"
      "https://dhall.cachix.org"
    ];

    binaryCachePublicKeys = [
      "cache.dhall-lang.org:I9/H18WHd60olG5GsIjolp7CtepSgJmM2CsO813VTmM="
      "dhall.cachix.org-1:8laGciue2JBwD49ICFtg+cIF8ddDaW7OFBjDb/dHEAo="
    ];
  };

If you are not using NixOS, then instead modify your /etc/nix/nix.conf file by adding the following options.

Using Nix 2.0 or later:

trusted-public-keys = cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY= cache.dhall-lang.org:I9/H18WHd60olG5GsIjolp7CtepSgJmM2CsO813VTmM= dhall.cachix.org-1:8laGciue2JBwD49ICFtg+cIF8ddDaW7OFBjDb/dHEAo=
substituters = https://cache.nixos.org https://cache.dhall-lang.org https://dhall.cachix.org

Using earlier Nix versions (i.e. Nix 1.*):

binary-cache-public-keys = cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY= cache.dhall-lang.org:I9/H18WHd60olG5GsIjolp7CtepSgJmM2CsO813VTmM= dhall.cachix.org-1:8laGciue2JBwD49ICFtg+cIF8ddDaW7OFBjDb/dHEAo=
binary-caches = https://cache.nixos.org https://cache.dhall-lang.org https://dhall.cachix.org

Since many tests require HTTP access, you should also add this setting to your /etc/nix/nix.conf:

sandbox = false

You can build all of the packages by running:

$ nix-build

... or you can run nix-build within each package's respective directory to build just that one package.

You can install all of the packages by running:

$ nix-env --install --file default.nix

... or you can run the same command within each package's respective directory to install just that one package.

If you prefer installing the binaries locally in a nix shell environment instead, just run nix-shell in the top-level directory. This option provides additional flexibility with respect to overriding some of the default parameters (e.g. the compiler version), which makes it particularly useful for developers.

You can develop any package by navigating to that package's directory and running:

$ nix-shell
[nix-shell]$ cabal configure
[nix-shell]$ cabal build
[nix-shell]$ cabal test

... or you can add nix: True to your ~/.cabal/config file and then you can run the same cabal commands without an explicit nix-shell:

$ cabal configure
$ cabal build
$ cabal test

stack

You can build all of the packages with

$ stack build

And each of them with stack build <package-name>, for example:

$ stack build dhall-json

Profiling

Say you want to profile the dhall-to-json executable.

Build the containing package with profiling options:

$ stack build --profile --library-profiling dhall-json

Run the executable on your input. For example:

$ stack exec --profile --rts-options -p -- dhall-to-json <<< 'True && False'

This generates a dhall-to-json.prof file in your current directory.

Build the website

If you don't need to change the GHCJS code, then switch to the dhall-lang repository and follow these instructions instead:

• dhall-lang - Build the website

If you do need to test changes to the GHCJS code (i.e. the ./dhall-try subdirectory) then stay within this repository, but edit the dhall/dhall-lang submodule to make the following change:

diff --git a/release.nix b/release.nix
--- a/dhall/dhall-lang/release.nix
+++ b/dhall/dhall-lang/release.nix
       let
         json = builtins.fromJSON (builtins.readFile ./nixops/dhall-haskell.json);
 
-        dhall-haskell =
-          pkgs.fetchFromGitHub {
-            owner = "dhall-lang";
-
-            repo = "dhall-haskell";
-
-            inherit (json) rev sha256 fetchSubmodules;
-          };
+        dhall-haskell = ../..;
 
       in
         import "${dhall-haskell}/default.nix";

... and then build the website by running:

$ nix build --file dhall/dhall-lang/release.nix website

... which will incorporate any GHCJS-related changes you make

Contributing

Read the following guide if you would like to contribute:

• Contributing to Dhall