BoardConfig.mk

#
# Copyright 2020 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This contains the module build definitions for the hardware-specific
# components for this device.
#
# As much as possible, those components should be built unconditionally,
# with device-specific names to avoid collisions, to avoid device-specific
# bitrot and build breakages. Building a component unconditionally does
# *not* include it on all devices, so it is safe even with hardware-specific
# components.

PLATFORM_PATH := device/motorola/ginna

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := SDM632
TARGET_NO_BOOTLOADER := true
TARGET_USES_UEFI := true

# Platform
TARGET_BOARD_PLATFORM := msm8953
TARGET_BOARD_PLATFORM_GPU := qcom-adreno506
TARGET_USES_64_BIT_BINDER := true
TARGET_SUPPORTS_64_BIT_APPS := true
BUILD_BROKEN_DUP_RULES := true

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := generic
TARGET_CPU_VARIANT_RUNTIME := kryo
TARGET_CPU_SMP := true

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv8-a
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := generic
TARGET_2ND_CPU_VARIANT_RUNTIME := cortex-a53
ARCH_ARM_HAVE_TLS_REGISTER := true

# Enable CPUSets
ENABLE_CPUSETS := true
ENABLE_SCHEDBOOST := true

# GPT Utils
BOARD_PROVIDES_GPTUTILS := true

# Kernel
BOARD_BOOT_HEADER_VERSION := 2
BOARD_KERNEL_CMDLINE := \
    console=ttyMSM0,115200,n8 \
    androidboot.console=ttyMSM0 \
    androidboot.hardware=qcom \
    user_debug=30 \
    msm_rtb.filter=0x237 \
    ehci-hcd.park=3 \
    androidboot.bootdevice=7824900.sdhci \
    lpm_levels.sleep_disabled=1 \
    earlycon=msm_hsl_uart,0x78af000 \
    androidboot.usbconfigfs=true \
    printk.devkmsg=on \
    androidboot.hab.csv=8 \
    androidboot.hab.product=ginna \
    androidboot.hab.cid=50 \
    androidboot.boot_devices=soc/7824900.sdhci
# BOARD_KERNEL_CMDLINE += loop.max_part=7 # Removed to support Android 11 - NOTE: Max value is 255, but only 21 should currently be needed for TWRP
# For the love of all that is holy, please do not include this in your ROM unless you really want TWRP to not work correctly!
BOARD_KERNEL_CMDLINE += androidboot.fastboot=1
BOARD_KERNEL_CMDLINE += androidboot.veritymode=eio
BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive
BOARD_KERNEL_BASE := 0x80000000
BOARD_KERNEL_PAGESIZE :=  2048
BOARD_KERNEL_OFFSET := 0x00008000
BOARD_RAMDISK_OFFSET := 0x01000000
BOARD_SECOND_OFFSET := 0x00f00000
BOARD_TAGS_OFFSET := 0x00000100
BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb
BOARD_KERNEL_SEPARATED_DTBO := true
BOARD_INCLUDE_DTB_IN_BOOTIMG := true
TARGET_KERNEL_SOURCE := kernel/motorola/sdm632
TARGET_KERNEL_CONFIG := ginna_defconfig
TARGET_KERNEL_VERSION := 4.9
TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_HEADER_ARCH := arm64
BOARD_MKBOOTIMG_ARGS += --header_version $(BOARD_BOOT_HEADER_VERSION)

# Partitions
BOARD_BOOTIMAGE_PARTITION_SIZE := 33554432
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67108864
BOARD_DTBOIMG_PARTITION_SIZE := 8388608
BOARD_USERDATAIMAGE_PARTITION_SIZE := 47689219072
BOARD_FLASH_BLOCK_SIZE := 131072 # (BOARD_KERNEL_PAGESIZE * 64)
BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := f2fs
LZMA_RAMDISK_TARGETS := recovery

# Super
BOARD_SUPER_PARTITION_SIZE := 9730785280
BOARD_SUPER_PARTITION_GROUPS := qti_dynamic_partitions
BOARD_QTI_DYNAMIC_PARTITIONS_SIZE := 4814868352
BOARD_QTI_DYNAMIC_PARTITIONS_PARTITION_LIST := \
    system \
    product \
    vendor

# Recovery
BOARD_HAS_NO_SELECT_BUTTON := true
BOARD_HAS_LARGE_FILESYSTEM := true
BOARD_INCLUDE_RECOVERY_DTBO := true
TARGET_RECOVERY_PIXEL_FORMAT := "RGBX_8888"
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

# A/B device flags
TARGET_NO_KERNEL := false
TARGET_NO_RECOVERY := false
BOARD_USES_RECOVERY_AS_BOOT := false
BOARD_BUILD_SYSTEM_ROOT_IMAGE := false

# Init
TARGET_INIT_VENDOR_LIB := libinit_$(TARGET_DEVICE)
TARGET_RECOVERY_DEVICE_MODULES := libinit_$(TARGET_DEVICE)

# TWRP specific build flags
BOARD_HAS_NO_REAL_SDCARD := true
RECOVERY_SDCARD_ON_DATA := true
TARGET_RECOVERY_QCOM_RTC_FIX := true
TW_BRIGHTNESS_PATH := "/sys/class/backlight/panel0-backlight/brightness"
TW_EXCLUDE_DEFAULT_USB_INIT := true
TW_INCLUDE_NTFS_3G := true
TW_INCLUDE_RESETPROP := true
TW_INPUT_BLACKLIST := "hbtp_vm"
TW_MAX_BRIGHTNESS := 255
TW_DEFAULT_BRIGHTNESS := 120
TW_THEME := portrait_hdpi
TARGET_RECOVERY_DEVICE_MODULES += android.hardware.boot@1.0
TARGET_USE_CUSTOM_LUN_FILE_PATH := /config/usb_gadget/g1/functions/mass_storage.0/lun.%d/file
TW_NO_SCREEN_BLANK := true
# Encryption
PLATFORM_VERSION := 16.1.0
PLATFORM_SECURITY_PATCH := 2099-12-31
VENDOR_SECURITY_PATCH := 2099-12-31
TW_INCLUDE_CRYPTO := true
BOARD_USES_QCOM_FBE_DECRYPTION := true

# Extras
TARGET_SYSTEM_PROP += $(PLATFORM_PATH)/system.prop

BOARD_SUPPRESS_SECURE_ERASE := true
TW_USE_TOOLBOX := true
TW_EXCLUDE_TWRPAPP := true
TW_HAS_EDL_MODE := true

# Asian region languages
TW_EXTRA_LANGUAGES := true
# TW_DEFAULT_LANGUAGE := zh_CN

# Debug flags
TWRP_INCLUDE_LOGCAT := true
TARGET_USES_LOGD := true

ALLOW_MISSING_DEPENDENCIES := true
# Workaround for error copying vendor files to recovery ramdisk
BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
TARGET_COPY_OUT_VENDOR := vendor
TARGET_COPY_OUT_PRODUCT := product