diff --git a/config/printer-wanhao-duplicator-i3-plus-2017.cfg b/config/printer-wanhao-duplicator-i3-plus-2017.cfg
index 434029cb699a..c3cc60e6121c 100644
--- a/config/printer-wanhao-duplicator-i3-plus-2017.cfg
+++ b/config/printer-wanhao-duplicator-i3-plus-2017.cfg
@@ -5,12 +5,6 @@
 # official Marlin source available at:
 # https://github.com/garychen99/Duplicator-i3-plus
 
-# Pin numbers related to the [probe] section match the the configuration 
-# laid out here: https://manual.advi3pp.com/en/add-bl-touch. 
-# If you are coming from Advi++, it should be an exact match.
-# If you are not using a probe, such as BL Touch, please remove the Probe Related section.
-
-
 # See docs/Config_Reference.md for a description of parameters.
 
 [mcu]
@@ -101,27 +95,32 @@ pin: PE3
 
 #####################################################################
 #   Probe Related
+
+# Pin numbers related to the [bltouch] section match the configuration 
+# laid out here: https://manual.advi3pp.com/en/add-bl-touch. 
+# If you are coming from Advi++ it should be an exact match and
+# you should be be safe uncommenting all 3 sections below.
 #####################################################################
 
-[probe]
-sensor_pin: ^PA3
-control_pin: PG1
-x_offset: 0
-y_offset: -41
-probe_with_touch_mode: True
-pin_up_touch_mode_reports_triggered: True
-
-[safe_z_home]
-home_xy_position: 107,141 # Change coordinates to the center of your print bed
-speed: 50
-z_hop: 10                 # Move up 10mm
-z_hop_speed: 5
-
-[bed_mesh]
-speed: 175
-mesh_min: 10, 10
-mesh_max: 180, 150
-probe_count: 5,5
+#[bltouch]
+#sensor_pin: ^PA3
+#control_pin: PG1
+#x_offset: 0
+#y_offset: -41
+#probe_with_touch_mode: True
+#pin_up_touch_mode_reports_triggered: True
+
+#[safe_z_home]
+#home_xy_position: 107,141 # Change coordinates to the center of your print bed
+#speed: 50
+#z_hop: 10                 # Move up 10mm
+#z_hop_speed: 5
+
+#[bed_mesh]
+#speed: 175
+#mesh_min: 10, 10
+#mesh_max: 180, 150
+#probe_count: 5,5
 
 #####################################################################
 #   Misc