layout

title

description

tableOfContents

outline

pagination

visible
true

visible

visible
true

visible
true

visible
true

1.6 Privacy

We configure Tor and I2P to run your node anonymously.

Running your own Bitcoin and Lightning node at home makes you a direct, sovereign peer on the Bitcoin network. However, if not configured without privacy in mind, it also tells the world that there is someone with Bitcoin at that address.

We'll also make it easy to connect to your node from outside your home network as an added benefit.

True, it's only your IP address that is revealed, but using services like iplocation.net, your physical address can be determined quite accurately. Especially with Lightning, your IP address would be widely used. We need to make sure that you keep your privacy.

Tor Project

We use Tor, a free software built by the Tor Project. It allows you to anonymize internet traffic by routing it through a network of nodes, hiding your location and usage profile.

It is called "Tor" for "The Onion Router": information is routed through many hops and encrypted multiple times. Each node decrypts only the layer of information addressed to it, learning only the previous and the next hop of the whole route. The data package is peeled like an onion until it reaches the final destination.

Tor installation

Log in to your MiniBolt via SSH as the user admin and install Tor.

Update the packages and upgrade to keep up to date with the OS

sudo apt update && sudo apt full-upgrade

Install dependency

sudo apt install apt-transport-https

Create a new file called tor.list

sudo nano /etc/apt/sources.list.d/tor.list

Add the following entries. Save and exit

deb     [arch=amd64 signed-by=/usr/share/keyrings/tor-archive-keyring.gpg] https://deb.torproject.org/torproject.org jammy main
deb-src [arch=amd64 signed-by=/usr/share/keyrings/tor-archive-keyring.gpg] https://deb.torproject.org/torproject.org jammy main

Up to "root" user temporarily

sudo su

Add the GPG key used to sign the packages by running the following command at your command prompt

{% code overflow="wrap" %}

wget -qO- https://deb.torproject.org/torproject.org/A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89.asc | gpg --dearmor | tee /usr/share/keyrings/tor-archive-keyring.gpg >/dev/null

{% endcode %}

Return to admin using exit command

exit

Update the apt repository, and install Tor and Tor Debian keyring. Press "y" and "enter"

sudo apt update && sudo apt install tor deb.torproject.org-keyring

Check Tor has been correctly installed

tor --version

Example of expected output:

> Tor version 0.4.7.13.
[...]

{% hint style="info" %} Please note that the before version number might change in your case, this is just an example of when the guide was made. {% endhint %}

Tor configuration

Bitcoin Core will communicate directly with the Tor daemon to route all traffic through the Tor network. We need to enable Tor to accept instructions through its control port, with the proper authentication.

Edit the Tor configuration

sudo nano /etc/tor/torrc --linenumbers

Uncomment line 56 to enable the control port

ControlPort 9051

Reload the Tor configuration to activate the modifications

sudo systemctl reload tor

Ensure that the Tor service is working and listening at the default ports 9050 and 9051 on the localhost (127.0.0.1)

sudo ss -tulpn | grep LISTEN | grep tor

Expected output ⬇️

tcp     LISTEN 0    4096     127.0.0.1:9050   0.0.0.0:*    users:(("tor",pid=795,fd=6))
tcp     LISTEN 0    4096     127.0.0.1:9051   0.0.0.0:*    users:(("tor",pid=795,fd=7))

(Optional) Check the systemd journal to see Tor in real time updates output logs. Ctrl + C to exit

journalctl -fu tor@default

Example of expected output ⬇️

Dec 11 10:47:04 minibolt Tor[1065]: Tor 0.4.7.11 running on Linux with Libevent 2.1.12-stable, OpenSSL 3.0.2, Zlib 1.2.11, Liblzma 5.2.5, Libzstd 1.4.8 and Glibc 2.35 as libc.
Dec 11 10:47:04 minibolt Tor[1065]: Tor can't help you if you use it wrong! Learn how to be safe at https://support.torproject.org/faq/staying-anonymous/
Dec 11 10:47:04 minibolt Tor[1065]: Read configuration file "/usr/share/tor/tor-service-defaults-torrc".
Dec 11 10:47:04 minibolt Tor[1065]: Read configuration file "/etc/tor/torrc".
Dec 11 10:47:04 minibolt Tor[1065]: Based on detected system memory, MaxMemInQueues is set to 2751 MB. You can override this by setting MaxMemInQueues by hand.
Dec 11 10:47:04 minibolt Tor[1065]: Opening Socks listener on 127.0.0.1:9050
Dec 11 10:47:04 minibolt Tor[1065]: Opened Socks listener connection (ready) on 127.0.0.1:9050
Dec 11 10:47:04 minibolt Tor[1065]: Opening Control listener on 127.0.0.1:9051
Dec 11 10:47:04 minibolt Tor[1065]: Opened Control listener connection (ready) on 127.0.0.1:9051
[...]
Dec 11 10:47:36 minibolt Tor[1065]: Bootstrapped 75% (enough_dirinfo): Loaded enough directory info to build circuits
Dec 11 10:47:37 minibolt Tor[1065]: Bootstrapped 89% (ap_handshake): Finishing handshake with a relay to build circuits
Dec 11 10:47:37 minibolt Tor[1065]: Bootstrapped 90% (ap_handshake_done): Handshake finished with a relay to build circuits
Dec 11 10:47:37 minibolt Tor[1065]: Bootstrapped 95% (circuit_create): Establishing a Tor circuit
Dec 11 10:47:37 minibolt Tor[1065]: Bootstrapped 100% (done): Done
Nov 13 23:19:20 minibolt systemd[1]: Reloading tor@default.service - Anonymizing overlay network for TCP...
Nov 13 23:19:20 minibolt Tor[27155]: Received reload signal (hup). Reloading config and resetting internal state.
Nov 13 23:19:20 minibolt Tor[27155]: Read configuration file "/usr/share/tor/tor-service-defaults-torrc".
Nov 13 23:19:20 minibolt Tor[27155]: Read configuration file "/etc/tor/torrc".
Nov 13 23:19:20 minibolt Tor[27155]: Opening Control listener on 127.0.0.1:9051
Nov 13 23:19:20 minibolt Tor[27155]: Opened Control listener connection (ready) on 127.0.0.1:9051
Nov 13 23:19:20 minibolt systemd[1]: Reloaded tor@default.service - Anonymizing overlay network for TCP.

{% hint style="info" %} Not all network traffic is routed over the Tor network, by default some services don't include a proxy socks5 configuration to use. Anyway, we now have the base to configure sensitive applications to use it {% endhint %}

{% hint style="info" %} (Optional) -> If you want, you can disable the autoboot option for Tor using:

sudo systemctl disable tor

Expected output:

> Synchronizing state of tor.service with SysV service script with /lib/systemd/systemd-sysv-install.
> Executing: /lib/systemd/systemd-sysv-install disable tor
> Removed /etc/systemd/system/multi-user.target.wants/tor.service.

{% endhint %}

I2P Project

I2P is a universal anonymous network layer. All communications over I2P are anonymous and end-to-end encrypted, participants don't reveal their real IP addresses. I2P allows people from all around the world to communicate and share information without restrictions.

I2P client is software used for building and using anonymous I2P networks. Such networks are commonly used for anonymous peer-to-peer applications (filesharing, cryptocurrencies) and anonymous client-server applications (websites, instant messengers, chat-servers).

We are to use i2pd (I2P Daemon), a full-featured C++ implementation of the I2P client, as a Tor network complement.

I2P installation

Ensure that you are logged in with the user admin and add the i2pd repository

wget -q -O - https://repo.i2pd.xyz/.help/add_repo | sudo bash -s -

Expected output:

Importing signing key
Adding APT repository

Update the apt repository and install i2pd as any other software package. Press "y" and "enter"

sudo apt update && sudo apt install i2pd

Check that i2pd has been correctly installed

i2pd --version

Example of expected output:

> i2pd version 2.44.0 (0.9.56)
[...]

Ensure that the i2pd service is working and listening at the default ports

sudo ss -tulpn | grep LISTEN | grep i2pd

Example of expected output ⬇️

tcp   LISTEN 0      4096       127.0.0.1:4444       0.0.0.0:*    users:(("i2pd",pid=17781,fd=32))
tcp   LISTEN 0      4096       127.0.0.1:7070       0.0.0.0:*    users:(("i2pd",pid=17781,fd=22))
tcp   LISTEN 0      4096       127.0.0.1:4447       0.0.0.0:*    users:(("i2pd",pid=17781,fd=33))
tcp   LISTEN 0      4096        0.0.0.0:22848       0.0.0.0:*    users:(("i2pd",pid=17781,fd=17))
tcp   LISTEN 0      4096       127.0.0.1:7656       0.0.0.0:*    users:(("i2pd",pid=17781,fd=41))
tcp   LISTEN 0      4096       127.0.0.1:6668       0.0.0.0:*    users:(("i2pd",pid=17781,fd=37))

See “i2p” in action by monitoring its log file. Exit with Ctrl-C

sudo tail -f /var/log/i2pd/i2pd.log

Example of expected output ⬇️

11:52:56@883/none - i2pd v2.44.0 (0.9.56) starting...
11:52:57@444/warn - Transports: 15 ephemeral keys generated at the time
11:52:57@883/warn - Addressbook: subscriptions.txt usage is deprecated, use config file instead
11:52:58@783/warn - SSU2: Peer test 4 router not found
11:52:58@783/warn - SSU2: Peer test 4 router not found
11:53:02@783/warn - SSU2: Session with 81.155.117.241:24027 was not established after 5 seconds
11:53:02@783/warn - SSU2: Session with 82.48.155.160:20423 was not established after 5 seconds
11:53:02@783/warn - SSU2: Session with 81.107.248.153:24716 was not established after 5 seconds
11:53:02@783/warn - SSU2: Session with 188.127.17.98:39249 was not established after 5 seconds
11:53:02@553/warn - NTCP2: SessionCreated read error: End of file

{% hint style="info" %} (Optional) -> If you want, you can disable the autoboot option for I2P using:

sudo systemctl disable i2pd

Expected output:

> Synchronizing state of i2pd.service with SysV service script with /lib/systemd/systemd-sysv-install.
> Executing: /lib/systemd/systemd-sysv-install disable i2pd
> Removed /etc/systemd/system/multi-user.target.wants/i2pd.service.

{% endhint %}

Extras (optional)

SSH remote access through Tor

If you want to log into your MiniBolt with SSH when you're away, you can easily do so by adding a Tor hidden service. This makes "calling home" very easy, without the need to configure anything on your internet router.

SSH server

Ensure that you are logged in with the user admin , edit the torrc file

sudo nano /etc/tor/torrc

Add the following lines in the "location hidden services" section, below "## This section is just for location-hidden services ##" in the torrc file. Save and exit

# Hidden Service SSH server
HiddenServiceDir /var/lib/tor/hidden_service_sshd/
HiddenServiceVersion 3
HiddenServicePoWDefensesEnabled 1
HiddenServicePort 22 127.0.0.1:22

Reload the Tor configuration to apply the configuration

sudo systemctl reload tor

Get the SSH Onion address

sudo cat /var/lib/tor/hidden_service_sshd/hostname

Example of expected output:

> abcdefg..............xyz.onion

Save the Tor address in a secure location, e.g. your password manager

SSH client

You also need to have Tor installed on your regular computer where you start the SSH connection. Usage of SSH over Tor differs by client and operating system.

Windows:

To enable Tor in the background follow the same instructions for the preparations section of the Desktop Wallet guide.

PuTTy:
- Follow the same instructions of the remote access section for Putty, but this time type the .onion address on the hostname.
  - Go to the "Connection" tab -> Proxy, select "Socks5" as proxy type, on Proxy hostname, type "localhost", port "9050".
  - Press the button OPEN, when a "PuTTy security alert" banner appears, and press on the "Accept" button, if the prompt asks you user/password, leave it empty and press ENTER directly, and finally type your password [A].
MobaXterm:
- Follow the same instructions of the remote access section for MobaXterm, but this time type the .onion address on the hostname.
- Go to the "Network settings" tab, select Proxy type "Socks5" on the host, type "localhost", for login, left empty, port "9050".
- Press the button OK, when a "Connexion to..." banner appears press the "Accept" button, if the prompt asks you user/password, leave it empty and press ENTER directly, and finally type your password [A].

📝 If you are using PuTTy and fail to connect to your PC by setting port 9050 in the PuTTy proxy settings, try setting port 9150 instead. When Tor runs as an installed application instead of a background process it uses port 9150.

Linux:
- Use torify or torsocks, both work similarly; just use whatever you have available

torify ssh admin@abcdefg..............xyz.onion

torsocks ssh admin@abcdefg..............xyz.onion

{% hint style="info" %} When the prompt asks you "Are you sure you want to continue connecting?" type "yes" and press ENTER {% endhint %}

macOS: Using torify or torsocks may not work due to Apple's System Integrity Protection (SIP) which will deny access to /usr/bin/ssh.

To work around this, first, make sure Tor is installed and running on your Mac:

brew install tor && brew services start tor

You can SSH to your PC "out of the box" with the following proxy command:

{% code overflow="wrap" %}

ssh -o "ProxyCommand nc -X 5 -x 127.0.0.1:9050 %h %p" admin@abcdefg..............xyz.onion

{% endcode %}

For a more permanent solution, add these six lines below to your local SSH config file. Choose any HOSTNICKNAME you want, save, and exit

sudo nano .ssh/config

Host HOSTNICKNAME
  Hostname abcdefg..............xyz.onion
  User admin
  Port 22
  CheckHostIP no
  ProxyCommand /usr/bin/nc -x localhost:9050 %h %p

Restart Tor

brew services restart tor

You should now be able to SSH to your PC with

ssh HOSTNICKNAME

Use the Tor proxy from another device

It's possible to use the Tor proxy of the node from another device in the same local network (e.g your regular computer)

With admin user, edit the Tor file

sudo nano /etc/tor/torrc --linenumbers

Replace the existing line 18 to this

SocksPort 0.0.0.0:9050

Reload the Tor configuration to apply changes

sudo systemctl reload tor

Configure the firewall to allow incoming Tor connections from anywhere

sudo ufw allow 9050/tcp comment 'allow Tor socks5 from anywhere'

Ensure that the Tor service is working and listening at the default ports 9050 on the 0.0.0.0

sudo ss -tulpn | grep LISTEN | grep tor

Expected output:

> tcp   LISTEN 0      4096         0.0.0.0:9050       0.0.0.0:*    users:(("tor",pid=2162,fd=6))
> tcp   LISTEN 0      4096       127.0.0.1:9051       0.0.0.0:*    users:(("tor",pid=2162,fd=7))

You can use this connection from another device in the same local network for example to navigate using a standard browser, without using the Tor browser.

Example from Firefox:

Go to Settings > General > Network Settings > Push to the "Settings" button

Edit the screen to match with this, replacing SOCKS Host, with your node local IP address:

Click on the OK button, and try to navigate to some clearnet domain like https://minibolt.info, if it resolves, you are OK.
Or simply go to this website, and you should see "Congratulations. This browser is configured to use Tor."

Also, you can use the Tor proxy connection to reach clearnet or third-party address connection on Sparrow wallet. Check out the Desktop wallet: Sparrow wallet guide to get instructions.

Upgrade Tor and I2P

The latest release can be found on the official Tor web page or the unofficial GitHub page and for I2P on the PPA page. To upgrade type this command:

sudo apt update && sudo apt upgrade

Uninstall

Uninstall Tor

With user admin, enter the next command and "y" when the prompt asks you if you want to continue

sudo apt autoremove tor deb.torproject.org-keyring && sudo apt purge tor

Expected output:

[...]
The following packages will be REMOVED:
  deb.torproject.org-keyring tor tor-geoipdb torsocks
[...]

Uninstall I2P

With user admin, enter the next command, and "y" when the prompt asks you if you want to continue

sudo apt autoremove i2pd && sudo apt purge i2pd

Expected output:

[...]
The following packages will be REMOVED:
  i2pd libminiupnpc17
[...]

Troubleshooting

Tor troubleshooting

If you have problems with the Tor connection (LN channels offline, excessive delay to the hidden services access, etc...) is possible that the set of entry guards is overloaded, delete the file called "state" in your Tor directory, and you will be forcing Tor to select an entirely new set of entry guards next time it starts.

Stop Tor

sudo systemctl stop tor

Delete the file called "state" in your Tor directory

sudo rm /var/lib/tor/state

Start Tor again

sudo systemctl start tor

If your new set of entry guards still produces the stream error, try connecting to the internet using a cable if you're using Wireless. If that doesn't help, I'd suggest downloading Wireshark and seeing if you're getting drowned in TCP transmission errors for non-Tor traffic. If yes, your ISP is who you need to talk to.

If not, try using obfs bridges and see if that helps. Your ISP, the company's network, your country, etc, could be censoring completely your Tor access, use of obfs bridges could help to avoid this censorship.

Example of Tor censorship output:

I2P troubleshooting

If you see these output logs on Bitcoin Core, normally could be that I2P is failing:

If this happens, usually this fix only with restarting the i2pd service

With user admin, restart the service

sudo systemctl restart i2pd

Check again the Bitcoin Core logs to ensure that the errors don't appear anymore

Port reference

Port	Protocol	Use
9050	TCP	Default port
9051	TCP	Control port
7656	TCP	I2P SAM proxy port

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

privacy.md

privacy.md

1.6 Privacy

Tor Project

Tor installation

Tor configuration

I2P Project

I2P installation

Extras (optional)

SSH remote access through Tor

SSH server

SSH client

Use the Tor proxy from another device

Upgrade Tor and I2P

Uninstall

Uninstall Tor

Uninstall I2P

Troubleshooting

Tor troubleshooting

I2P troubleshooting

Port reference

Files

privacy.md

Latest commit

History

privacy.md

File metadata and controls

1.6 Privacy

Tor Project

Tor installation

Tor configuration

I2P Project

I2P installation

Extras (optional)

SSH remote access through Tor

SSH server

SSH client

Use the Tor proxy from another device

Upgrade Tor and I2P

Uninstall

Uninstall Tor

Uninstall I2P

Troubleshooting

Tor troubleshooting

I2P troubleshooting

Port reference