Uploading Logo for Widget Demo #229

eboston · 2021-10-12T14:27:20Z

eboston
Oct 12, 2021

I have been able to get openHASP running and all pages on the Widget Demo seem to be working fine. The only problem I am having is getting the logo uploaded. I'm not sure if I am doing it right, or for that matter, if the ESP32 Devkit I have even supports PSram. I have uploaded the file via the HASP Design menu and directly through the File Editor. When I switch to the page, it says "No Data" for the image and the USB output reports...

Prompt > error 83: memory allocation failed [10:17:08.069][98596/103828 5][37032/37412 2] LVGL: Image draw cannot open the image resource [10:17:08.086][98596/103828 5][37032/37412 2] LVGL: Image draw error
I noticed in the pages.jsonl file for the demo, it is looking for the file "/littlefs/logo-medium.png". Do I need to move this file into a subdirectory? If I remove the "/littlefs" portion, I don't get the error, but it also doesn't show a white box like it did with the error

Here is the initial output when starting.

 ets Jun  8 2016 00:22:57

rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:1044
load:0x40078000,len:10124
load:0x40080400,len:5828
entry 0x400806a8



        open____ _____ _____ _____
          |  |  |  _  |   __|  _  |
          |     |     |__   |   __|
          |__|__|__|__|_____|__|
        Home Automation Switch Plate
        Open Hardware edition v0.6.1

[14:20:36.993][113792/201628 43][    0/    0  0] DBUG: Started @ 115200 Bps
[14:20:37.005][113792/201628 43][    0/    0  0] DBUG: Environment: d1-mini-esp32_ili9341
[14:20:37.019][113792/201628 43][    0/    0  0] CONS: Started
[14:20:37.030][113792/201628 43][    0/    0  0] CONS: Client login from serial
[14:20:37.043][113792/201628 43][    0/    0  0] CONF: SPI flash FS mounted
[14:20:37.071][113792/201628 43][    0/    0  0] FILE: Partition size: total: 720896, used: 32768
[14:20:37.085][113792/201628 43][    0/    0  0] CONF: Loading /config.json
[14:20:37.099][113792/201020 43][    0/    0  0] CONF: {"wifi":{"ssid":"Oxford","pass":"********"},"mqtt":{"name":"plate","group":"plates","host":"192.168.1.200","port":1883,"user":"mosquitto","pass":"********"},"telnet":{"enable":1,"port":23},"mdns":{"enable":1},"http":{"enable":true,"port":80,"user":"","pass":"********"},"gpio":{"config":[0,0,0,0,0,0,0,0]},"debug":{"baud":0,"tele":300,"host":"","port":514,"proto":0,"log":0},"gui":{"idle1":60,"idle2":120,"bckl":-1,"rotate":0,"cursor":false,"invert":0,"calibration":[255,3488,415,3474,4]},"hasp":{"startpage":1,"startdim":255,"theme":5,"hue":200,"font":"","pages":"/pages.jsonl"}}
[14:20:37.160][113792/201020 43][    0/    0  0] CONF: Loaded /config.json
[14:20:37.172][113792/201688 43][    0/    0  0] DBUG: Loading debug settings
[14:20:37.185][113792/201208 43][    0/    0  0] DBUG: {"baud":0,"tele":300,"host":"","port":514,"proto":0,"log":0}
[14:20:37.202][113792/201688 43][    0/    0  0] GPIO: Loading GUI settings
[14:20:37.214][113792/201208 43][    0/    0  0] GUI : {"idle1":60,"idle2":120,"bckl":-1,"rotate":0,"cursor":false,"invert":0,"calibration":[255,3488,415,3474,4]}
[14:20:37.234][113792/201688 43][    0/    0  0] GUI : calData set [255, 3488, 415, 3474, 4]
[14:20:37.248][113792/201688 43][    0/    0  0] HASP: Loading HASP settings
[14:20:37.261][113792/201208 43][    0/    0  0] HASP: {"startpage":1,"startdim":255,"theme":5,"hue":200,"font":"","pages":"/pages.jsonl"}
[14:20:37.279][113792/201688 43][    0/    0  0] CONF:     * haspThemeId set
[14:20:37.292][113792/201688 43][    0/    0  0] WIFI: Loading WiFi settings
[14:20:37.304][113792/201208 43][    0/    0  0] WIFI: {"ssid":"Oxford","pass":"********"}
[14:20:37.318][113792/201688 43][    0/    0  0] MQTT: Loading MQTT settings
[14:20:37.331][113792/201208 43][    0/    0  0] MQTT: {"name":"plate","group":"plates","host":"192.168.1.200","port":1883,"user":"mosquitto","pass":"********"}
[14:20:37.351][113792/201688 43][    0/    0  0] TELN: Loading Telnet settings
[14:20:37.364][113792/201208 43][    0/    0  0] TELN: {"enable":1,"port":23}
[14:20:37.377][113792/201688 43][    0/    0  0] MDNS: Loading MDNS settings
[14:20:37.389][113792/201208 43][    0/    0  0] MDNS: {"enable":1}
[14:20:37.401][113792/201688 43][    0/    0  0] HTTP: Loading HTTP settings
[14:20:37.414][113792/201208 43][    0/    0  0] HTTP: {"enable":true,"port":80,"user":"","pass":"********"}
[14:20:37.429][113792/201688 43][    0/    0  0] GPIO: Loading GPIO settings
[14:20:37.442][113792/201208 43][    0/    0  0] CONF: {"config":[0,0,0,0,0,0,0,0]}
[14:20:37.455][113792/201688 43][    0/    0  0] CONF: Settings loaded
[14:20:37.467][113792/203236 44][    0/    0  0] MSGR: Starting...
[14:20:37.479][113792/203236 44][    0/    0  0] MSGR: Started
[14:20:37.490][113792/203236 44][    0/    0  0] TFT : Starting...
[14:20:37.774][113792/203104 43][    0/    0  0] TFT : Rotation   : 0
[14:20:37.786][113792/203104 43][    0/    0  0] TFT : Invert Disp: No
[14:20:37.832][113792/203104 43][    0/    0  0] TFT : TFT_eSPI   : v2.3.70
[14:20:37.844][113792/203104 43][    0/    0  0] TFT : Transactns : Yes
[14:20:37.856][113792/203104 43][    0/    0  0] TFT : Interface  : SPI
[14:20:37.868][113792/203104 43][    0/    0  0] TFT : Driver     : ILI9341
[14:20:37.881][113792/203104 43][    0/    0  0] TFT : Resolution : 240x320
[14:20:37.893][113792/203104 43][    0/    0  0] TFT : MOSI       : 23 (GPIO 23)
[14:20:37.906][113792/203104 43][    0/    0  0] TFT : MISO       : 19 (GPIO 19)
[14:20:37.919][113792/203104 43][    0/    0  0] TFT : SCLK       : 18 (GPIO 18)
[14:20:37.932][113792/203104 43][    0/    0  0] TFT : TFT_CS     : 26 (GPIO 26)
[14:20:37.945][113792/203104 43][    0/    0  0] TFT : TFT_DC     : 5 (GPIO 05)
[14:20:37.958][113792/203104 43][    0/    0  0] TFT : TOUCH_CS   : 17 (GPIO 17)
[14:20:37.971][113792/203104 43][    0/    0  0] TFT : Display SPI freq. : 40.0 MHz
[14:20:37.984][113792/203104 43][    0/    0  0] TFT : Touch SPI freq.   : 2.5 MHz
[14:20:37.997][113792/203104 43][    0/    0  0] TFT : Started
[14:20:38.009][113792/170320 33][    0/    0  0] LVGL: Starting...
[14:20:38.028][113792/170320 33][46192/46660  2] LVGL: Version    : 7.11.0
[14:20:38.042][113792/170320 33][45892/45956  1] LVGL: Filesystem : Enabled
Prompt > Opening file: config.json
[14:20:38.065][113792/169076 32][45808/45864  1] HASP: TEST Opening config.json OK
[14:20:38.078][113792/169976 33][45776/45840  1] GUI : DMA        : Disabled
[14:20:38.091][113792/169976 33][45776/45840  1] GUI : Backlight  : Pin not set
[14:20:38.104][113792/169976 33][45776/45840  1] LVGL: MEM size   : 49152
[14:20:38.116][113792/169976 33][45776/45840  1] LVGL: VFB size   : 32768
[14:20:38.131][113792/169976 33][45444/45456  1] LVGL: Started
[14:20:38.142][113792/169976 33][45444/45456  1] ATTR: src/hasp/hasp.cpp 419 0
[14:20:38.155][113792/169976 33][45444/45456  1] ATTR: src/hasp/hasp.cpp 420 0
[14:20:38.168][113792/169976 33][45444/45456  1] FONT: File lib/lv_lib_zifont/lv_zifont.cpp - Line 134 - lv_zifont_font_init
[14:20:38.184][113792/169976 33][45444/45456  1] FONT: File lib/lv_lib_zifont/lv_zifont.cpp - Line 137 - init font
[14:20:38.200][113792/169976 33][45416/45428  1] FONT: File lib/lv_lib_zifont/lv_zifont.cpp - Line 145 - init font dsc
[14:20:38.216][113792/169976 33][45364/45376  1] ATTR: src/hasp/hasp.cpp 439 0
[14:20:38.237][113792/169976 33][45184/45424  1] HASP: Custom theme loaded
[14:20:38.278][113792/169976 33][44128/44288  1] HASP: Loading /pages.jsonl
[14:20:38.333][113792/167640 32][44040/44060  1] ATTR: src/hasp/hasp_attribute.cpp 219 400FDF10
[14:20:38.347][113792/167640 32][44040/44060  1] ATTR: src/hasp/hasp_attribute.cpp 571 400FDF10
[14:20:38.376][113792/167640 32][43532/43556  1] ATTR: Unknown property padh (19573)
[14:20:38.433][113792/167640 32][41316/41316  0] ATTR: Unknown property rect (11204)
[14:20:38.524][113792/167196 31][38816/38840  1] ATTR: src/hasp/hasp_attribute.cpp 219 400FDF10
[14:20:38.538][113792/167196 31][38816/38840  1] ATTR: src/hasp/hasp_attribute.cpp 571 400FDF10
[14:20:38.564][113792/167196 31][38544/38568  1] ATTR: src/hasp/hasp_attribute.cpp 213 400FDF10
[14:20:38.578][113792/167196 31][38544/38568  1] ATTR: src/hasp/hasp_attribute.cpp 571 400FDF10
[14:20:38.604][113792/167196 31][38272/38300  1] ATTR: src/hasp/hasp_attribute.cpp 219 400FDF10
[14:20:38.618][113792/167196 31][38272/38300  1] ATTR: src/hasp/hasp_attribute.cpp 571 400FDF10
[14:20:38.638][113792/167292 31][38248/38292  1] MSGR: Jsonl fully parsed
[14:20:38.650][113792/169528 32][38248/38292  1] HASP: Loaded /pages.jsonl
[14:20:38.662][113792/169528 32][38248/38292  1] HASP: Changing page to 1
[14:20:38.677][113792/169528 32][38088/38104  1] MQTT: Started: 2048 bytes
[14:20:38.689][113792/169528 32][38088/38104  1] GPIO: Starting...
[14:20:38.701][113792/169528 32][38088/38104  1] GPIO: Reboot counter 1
[14:20:38.713][113792/169528 32][38088/38104  1] GPIO: Started
[14:20:38.771][113792/118640  4][38088/38104  1] WIFI: Connecting to Oxford
[14:20:38.787][113792/115332  1][38088/38104  1] HTTP: Started
[14:20:38.801][113792/114604  0][38088/38104  1] TELN: Telnet console started
[14:20:39.909][113792/114600  0][38248/38416  1] WIFI: No Connection... retry 0
[14:20:42.042][113424/113784  0][38248/38416  1] WIFI: Connected to Oxford, requesting IP...
[14:20:42.435][113424/113648  0][38248/38360  1] WIFI: Received IP address 192.168.1.46
[14:20:44.906][113424/113668  0][38248/38416  1] MSGR: File not found: /online.cmd
[14:20:44.919][113424/113668  0][38248/38416  1] MAIN: TIMEZONE: EST5EDT,M3.2.0/2,M11.1.0
[10:20:44.939][110556/110804  0][38248/38416  1] HTTP: Started @ http://192.168.1.46
[10:20:44.952][110200/112540  2][38248/38416  1] MDNS: Starting...
[10:20:44.970][106088/106520  0][38248/38416  1] MDNS: Started
[10:20:44.981][106088/106520  0][38248/38416  1] MQTT: Disconnected from broker, reconnection...
[10:20:44.996][106088/106520  0][38248/38416  1] MQTT: plate_ed4b68
[10:20:45.045][104292/104448  0][38248/38384  1] MQTT: Connected to broker 192.168.1.200 as clientID plate_ed4b68
[10:20:45.045][102472/102628  0][38248/38384  1] MQTT:     * Subscribed to hasp/plates/command/#
[10:20:45.061][102112/102340  0][38248/38384  1] MQTT:     * Subscribed to hasp/plate/command/#
[10:20:45.078][98688/100580  1][38248/38384  1] MQTT:     * Subscribed to hasp/plates/config/#
[10:20:45.095][98460/98836  0][38248/38384  1] MQTT:     * Subscribed to hasp/plate/config/#
[10:20:45.111][96512/97072  0][38248/38384  1] MQTT:     * Subscribed to hasp/broadcast/command/#
[10:20:45.227][93484/93808  0][37824/38380  2] MQTT PUB: statusupdate => {"node":"plate","idle":"off","version":"0.6.1","uptime":8,"ssid":"Oxford","rssi":-65,"ip":"192.168.1.46","mac":"7C:9E:BD:ED:4B:68","heapFree":96984,"heapFrag":2,"core":"v3.3.5-1-g85c43024c","canUpdate":"false","page":1,"numPages":12,"tftDriver":"ILI9341","tftWidth":240,"tftHeight":320}
[10:20:45.269][91772/92028  0][37824/38380  2] MQTT PUB: idle => off
[10:20:45.284][93256/93580  0][37824/38380  2] MQTT PUB: page => 1
[10:20:45.300][93252/93576  0][37824/38380  2] MQTT PUB: sensors => {"time":"2021-10-12T10:20:45","uptimeSec":8,"uptime":"0T00:00:08","ESP32":{"Temperature":44.44}}
[10:20:45.325][91772/92028  0][37824/38380  2] MQTT PUB: discovery => {"node":"plate","mdl":"1 D1 Mini","mf":"openHASP","hwid":"7c9ebded4b68","pages":12,"sw":"0.6.1","input":{},"power":[],"light":[],"dim":[]}
[10:20:50.659][98588/102392  3][38248/38384  1] HTTP: Sent / page to 192.168.1.20
Prompt >

Answered by fvanroie

Oct 12, 2021

I noticed in the pages.jsonl file for the demo, it is looking for the file "/littlefs/logo-medium.png". Do I need to move this file into a subdirectory? If I remove the "/littlefs" portion, I don't get the error, but it also doesn't show a white box like it did with the error

/littlefs indicates the partition and is not a real subdirectory. So the image should be in the root of the flash.
It sounds as if you just don't have the available RAM to load the image into memory.
Do you have the model or picture of the ESP Devkit?

View full answer

fvanroie · 2021-10-12T14:33:01Z

fvanroie
Oct 12, 2021
Maintainer

I noticed in the pages.jsonl file for the demo, it is looking for the file "/littlefs/logo-medium.png". Do I need to move this file into a subdirectory? If I remove the "/littlefs" portion, I don't get the error, but it also doesn't show a white box like it did with the error

/littlefs indicates the partition and is not a real subdirectory. So the image should be in the root of the flash.
It sounds as if you just don't have the available RAM to load the image into memory.
Do you have the model or picture of the ESP Devkit?

0 replies

eboston · 2021-10-12T15:44:25Z

eboston
Oct 12, 2021
Author

So it looks like the units I have don't have the proper memory. Does anyone have an Amazon link to a unit that supports the PSram?

0 replies

fvanroie · 2021-10-12T16:25:33Z

fvanroie
Oct 12, 2021
Maintainer

Most likely if you look on the chip it will say ESP32-WROOM and it won't support PSram. Not all is lost though... you could try to convert the PNG image into a BIN file. This will not require PSram but can be read directly from flash and drawn on the screen. See this updated part in the docs.

The models with PSram have the ESP32-WROVER chip or state it specifically in the specs.
I like these dev boards with PSram:

ESP32-DevKitC-VIE : needs an external antenna
ESP32-DevKitC-VE : with PCB antenna
LOLIN D32 Pro V2.0.0
TTGO T7 v1.5 Mini32
ESP32 One without camera

I advise to pick a model with at least 8MB flash for storage.

7 replies

fvanroie Nov 2, 2021
Maintainer

You can find the used/&available memory and PSram in the Information section of the web UI. Does it list the PSram there?
What's the image you are trying to load, can you maybe share it?

eboston Nov 2, 2021
Author

I don't see anything about 'PSram'.

fvanroie Nov 3, 2021
Maintainer

Hmmm, indeed PSram is not enabled in the config hence it's not being seen nor used...

Are you compiling the firmware yourself? We came to the conclusion that the v1.5 has a small change in the pin-layout compared to v1.4. Most notably, -D TOUCH_CS=27 is now needed for touch on default pin D3, instead of pin 17 (pins 16 and 17 are used internally for PSram).

If you are compiling yourself, you can add ${esp32.ps_ram} to the build_flags section of the .ini file:

build_flags =
    ${env.build_flags}
    ${esp32.build_flags}
    ${esp32.ps_ram}

Otherwise, I'll prepare a test build with these corrections. I don't have a v1.5 myself, but based on another thread it should work...

eboston Nov 3, 2021
Author

Adding the ps_ram fixed the problem. It might be good to add that in, but commented out, so it is easy to find. Thanks.

fvanroie Nov 8, 2021
Maintainer

Thanks for the feedback.

I've added a ${esp32.no_ps_ram} option to the configs that don't support PSram, to indicate the lack of the PSram chip.
If needed that option can be quickly toggled to ${esp32.ps_ram}.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uploading Logo for Widget Demo #229

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 3 comments 7 replies

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

Uploading Logo for Widget Demo #229

eboston Oct 12, 2021

Replies: 3 comments · 7 replies

fvanroie Oct 12, 2021 Maintainer

eboston Oct 12, 2021 Author

fvanroie Oct 12, 2021 Maintainer

fvanroie Nov 2, 2021 Maintainer

eboston Nov 2, 2021 Author

fvanroie Nov 3, 2021 Maintainer

eboston Nov 3, 2021 Author

fvanroie Nov 8, 2021 Maintainer

eboston
Oct 12, 2021

Replies: 3 comments 7 replies

fvanroie
Oct 12, 2021
Maintainer

eboston
Oct 12, 2021
Author

fvanroie
Oct 12, 2021
Maintainer

fvanroie Nov 2, 2021
Maintainer

eboston Nov 2, 2021
Author

fvanroie Nov 3, 2021
Maintainer

eboston Nov 3, 2021
Author

fvanroie Nov 8, 2021
Maintainer