Can't get the HASP Core functionality automation to work

[jjlink]

On my first unit it said setting up home assistant but it never finished. On my second unit running the run action does nothing as far as I can see. Any ideas?

[cboehnke]

There are much easier instruction now - after an ESP and LCD firmware update to HASPOne v1.0 everything is much faster.
And Home Assistant integration happens via Blueprints now.
https://github.com/HASwitchPlate/HASPone/wiki/Updating-legacy-HASP-to-HASPone

Full video walkthrough - and hugely entertaining conversation with Luma on Dr Zzs livestream from 2 weeks agon:
https://www.youtube.com/watch?v=RYuOvhQ0mtQ

[jjlink]

Yes, i followed these as shown on Dr Zzs video up to the point where his switchplate came up with the three pages. In my case the first one hung at that point, and the second one did nothing. Thanks

[aderusha]

On my first unit it said setting up home assistant but it never finished. On my second unit running the run action does nothing as far as I can see. Any ideas?

What do you see on each unit right now? Trying to get a sense of where you're at to see if we can't get you moving in the right direction.

[jjlink]

Right now they both display the WiFi Connected and the MQTT Connected. The odd part is the automations says this:

"HASP Core functionality plate01
Last triggered: Never
HASP Core functionality plate02
Last triggered: Never"

I tried running both of them multiple times, I also deleted them and re-ran the blueprint to recreate them.

[aderusha]

OK, so both showing connections on the display is good news! If you look under Configuration > Devices you should see both of your devices (looks like you're calling them plate01 and plate02). Can you open up the plate01 device page and post a screenshot of what you're seeing there?

[jjlink]

Ok, I deleted all the swplate entities, automations. Started over and plate2 worked fine, it has page1,2,3 on it now. Plate one says setting up home assistant, so I guess its hung up. I did get two notifications, one for each swplate.

[jjlink]

[jjlink]

[aderusha]

Allright so plate02 is looking OK there, plate01 is missing some bits and is suggesting those bits have been disabled, which is weird.

In the device view for plate01, hit the delete button to remove all the associated entities, then reboot plate01 and let it come up to the connected screen, then try deploying the blueprint again.

[jjlink]

Ok, it mostly working however the paging is a bit odd on plate01. On page 1 and 3 the top rectangle turns black. it does not do that on page 2.

[jjlink]

neverminded I rebooted it and its all working fine on both plates. Thanks for your help!

[aderusha]

Fantastic, glad it's sorted!