Disable USB pullup when stopping USB #176
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
It turns out that stopping the USB peripheral does not automatically reset this pullup, so stopping USB (e.g. through USBDevice.detach()) would let the pullup enabled, making the USB host think the board was still connected (but any subsequent communication would fail). Additionally, this would use around 300μA of current. This is a bug in the USB HAL used. This commit backports a small change from the HAL v1.11.3 to fix this. This fixes GrumpyOldPizza#171
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
It turns out that stopping the USB peripheral does not automatically
reset this pullup, so stopping USB (e.g. through USBDevice.detach())
would let the pullup enabled, making the USB host think the board was
still connected (but any subsequent communication would fail).
Additionally, this would use around 300μA of current.
This is a bug in the USB HAL used. This commit backports a small change
from the HAL v1.11.3 to fix this.
This fixes #171