VerneMQ is a high-performance, distributed MQTT message broker. It scales horizontally and vertically on commodity hardware to support a high number of concurrent publishers and consumers while maintaining low latency and fault tolerance. VerneMQ is the reliable message hub for your IoT platform or smart products.
VerneMQ is an Apache2 licensed distributed MQTT broker, developed in Erlang.
NOTE: To use the official Docker images you have to accept the VerneMQ End User License Agreement. You can read how to accept the VerneMQ EULA here.
NOTE 2 (TL:DR): To use the binary Docker packages (that is, the official packages from Docker Hub) or the VerneMQ binary Linux packages commercially and legally, you need a paid subscription. Accepting the EULA is your promise to do that. To avoid a subscription, you need to clone this repository and build and host your own Dockerfiles/-images.
2. Using Helm to deploy on Kubernetes
First install and configure Helm according to the documentation. Then add VerneMQ Helm charts repository:
helm repo add vernemq https://vernemq.github.io/docker-vernemq
You can now deploy VerneMQ on your Kubernetes cluster:
helm install vernemq/vernemq
For more information, check out the Helm chart README.
docker run -e "DOCKER_VERNEMQ_ACCEPT_EULA=yes" --name vernemq1 -d vernemq/vernemq
Sometimes you need to configure a forwarding for ports (on a Mac for example):
docker run -p 1883:1883 -e "DOCKER_VERNEMQ_ACCEPT_EULA=yes" --name vernemq1 -d vernemq/vernemq
This starts a new node that listens on 1883 for MQTT connections and on 8080 for MQTT over websocket connections. However, at this moment the broker won't be able to authenticate the connecting clients. To allow anonymous clients use the DOCKER_VERNEMQ_ALLOW_ANONYMOUS=on environment variable.
docker run -e "DOCKER_VERNEMQ_ACCEPT_EULA=yes" -e "DOCKER_VERNEMQ_ALLOW_ANONYMOUS=on" --name vernemq1 -d vernemq/vernemq
This allows a newly started container to automatically join a VerneMQ cluster. Assuming you started your first node like the example above you could autojoin the cluster (which currently consists of a single container 'vernemq1') like the following:
docker run -e "DOCKER_VERNEMQ_ACCEPT_EULA=yes" -e "DOCKER_VERNEMQ_DISCOVERY_NODE=<IP-OF-VERNEMQ1>" --name vernemq2 -d vernemq/vernemq
(Note, you can find the IP of a docker container using docker inspect <containername/cid> | grep \"IPAddress\").
When running VerneMQ inside Kubernetes, it is possible to cause pods matching a specific label to cluster altogether automatically. This feature uses Kubernetes' API to discover other peers, and relies on the default pod service account which has to be enabled.
Simply set DOCKER_VERNEMQ_DISCOVERY_KUBERNETES=1 in your pod's environment, and expose your own pod name through MY_POD_NAME . By default, this setting will cause all pods in the same namespace with the app=vernemq label to join the same cluster. Cluster name (defaults to cluster.local), namespace and label settings can be overridden with DOCKER_VERNEMQ_KUBERNETES_CLUSTER_NAME, DOCKER_VERNEMQ_KUBERNETES_NAMESPACE and DOCKER_VERNEMQ_KUBERNETES_LABEL_SELECTOR respectively.
An example configuration of your pod's environment looks like this:
env:
- name: DOCKER_VERNEMQ_DISCOVERY_KUBERNETES
value: "1"
- name: MY_POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: DOCKER_VERNEMQ_KUBERNETES_LABEL_SELECTOR
value: "app=vernemq,release=myinstance"
When enabling Kubernetes autoclustering, don't set DOCKER_VERNEMQ_DISCOVERY_NODE.
If you encounter "SSL certification error (subject name does not match the host name)" like below, you may try to set
DOCKER_VERNEMQ_KUBERNETES_INSECUREto "1".kubectl logs vernemq-0 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (51) SSL: certificate subject name 'client' does not match target host name 'kubernetes.default.svc.cluster.local' % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (51) SSL: certificate subject name 'client' does not match target host name 'kubernetes.default.svc.cluster.local' vernemq failed to start within 15 seconds, see the output of 'vernemq console' for more information. If you want to wait longer, set the environment variable WAIT_FOR_ERLANG to the number of seconds to wait. ...
If using an vernemq.conf.local file, you can insert a placeholder (###IPADDRESS###) in your config to be replaced (at POD creation time) with the actual IP address of the POD vernemq is running on, making VMQ clustering possible.
If istio is enabled you, set DOCKER_VERNEMQ_KUBERNETES_ISTIO_ENABLED=1 so the init script will check if istio is ready.
5. Using Docker Swarm
Please follow the official Docker guide to properly setup Swarm cluster with one or more nodes.
Once Swarm is setup you can deploy a VerneMQ stack. The following snippet describes the stack using a docker-compose.yml file:
version: "3.7"
services:
vmq0:
image: vernemq/vernemq
environment:
DOCKER_VERNEMQ_SWARM: 1
vmq:
image: vernemq/vernemq
depends_on:
- vmq0
environment:
DOCKER_VERNEMQ_SWARM: 1
DOCKER_VERNEMQ_DISCOVERY_NODE: vmq0
deploy:
replicas: 2
Run docker stack deploy -c docker-compose.yml my-vernemq-stack to deploy a 3 node VerneMQ cluster.
Note: Docker Swarm currently lacks the functionality similar to what is called a statefulset in Kubernetes. As a consequence VerneMQ must rely on a specific discovery service (the vmq0 service above) that is started before the other replicas.
To check if the above containers have successfully clustered you can issue the vmq-admin command:
docker exec vernemq1 vmq-admin cluster show
+--------------------+-------+
| Node |Running|
+--------------------+-------+
|[email protected]| true |
|[email protected]| true |
+--------------------+-------+
If you started VerneMQ cluster inside Kubernetes using DOCKER_VERNEMQ_DISCOVERY_KUBERNETES=1, you can execute vmq-admin through kubectl:
kubectl exec vernemq-0 -- vmq-admin cluster show
+---------------------------------------------------+-------+
| Node |Running|
+---------------------------------------------------+-------+
|[email protected]| true |
|[email protected]| true |
+---------------------------------------------------+-------+
All vmq-admin commands are available. See https://vernemq.com/docs/administration/ for more information.
All configuration parameters that are available in vernemq.conf can be defined
using the DOCKER_VERNEMQ prefix followed by the confguration parameter name.
E.g: allow_anonymous=on is -e "DOCKER_VERNEMQ_ALLOW_ANONYMOUS=on" or
allow_register_during_netsplit=on is
-e "DOCKER_VERNEMQ_ALLOW_REGISTER_DURING_NETSPLIT=on". All available configuration
parameters can be found on https://vernemq.com/docs/configuration/.
Erlang VM args can be updated using following environment variables
| Env variable name | Description |
|---|---|
| DOCKER_VERNEMQ_ERLANG__MAX_PORTS | Erlang max ports. Value provided will be set for +Q in vm.args file |
| DOCKER_VERNEMQ_ERLANG__PROCESS_LIMIT | Erlang process limit. Value provided will be set for +P in vm.args file |
| DOCKER_VERNEMQ_ERLANG__MAX_ETS_TABLES | Erlang Max ETS tables. Value provided will be set for +e in vm.args file |
| DOCKER_VERNEMQ_ERLANG__DISTRIBUTION_BUFFER_SIZE | Erlang Distribution buffer size. Value provided will be set for +zdbbl in vm.args file |
VerneMQ store crash and error log files in /var/log/vernemq/, and, by default,
doesn't write console log to the disk to avoid filling the container disk space.
However this behaviour can be changed by setting the environment variable DOCKER_VERNEMQ_LOG__CONSOLE to both
which tells VerneMQ to send logs to stdout and /var/log/vernemq/console.log.
For more information please see VerneMQ logging documentation: https://docs.vernemq.com/configuring-vernemq/logging
Some of our configuration variables contain dots .. For example if you want to
adjust the log level of VerneMQ you'd use -e "DOCKER_VERNEMQ_LOG.CONSOLE.LEVEL=debug". However, some container platforms
such as Kubernetes don't support dots and other special characters in
environment variables. If you are on such a platform you could substitute the
dots with two underscores __. The example above would look like -e "DOCKER_VERNEMQ_LOG__CONSOLE__LEVEL=debug".
There some exceptions on configuration names contains dots. You can see follow examples:
| format in vernemq.conf | format in environment variable name |
|---|---|
vmq_webhooks.pool_timeout = 60000 |
DOCKER_VERNEMQ_VMQ_WEBHOOKS__POOL_timeout=6000 |
vmq_webhooks.pool_timeout = 60000 |
DOCKER_VERNEMQ_VMQ_WEBHOOKS.pool_timeout=60000 |
You can set up File Based Authentication by adding users and passwords as environment variables as follows:
DOCKER_VERNEMQ_USER_<USERNAME>='password'
where <USERNAME> is the username you want to use. This can be done as many times as necessary
to create the users you want. The usernames will always be created in lowercase
CAVEAT - You cannot have a = character in your password.