Skip to content

Latest commit

 

History

History
126 lines (92 loc) · 11 KB

README.md

File metadata and controls

126 lines (92 loc) · 11 KB
Raw

Reproducible Package for "Implementing and evaluating the Timed Up and Go test automation using smartphones and smartwatches"

nbviewer Binder Paper DOI DOI

This repository is the reproducibility package for the “Implementing and evaluating the Timed Up and Go test automation using smartphones and smartwatches" journal paper, published in the IEEE Journal of Biomedical and Health Informatics.

M. Matey-Sanz, A. González-Pérez, S. Casteleyn and C. Granell, "Implementing and evaluating the Timed Up and Go test automation using smartphones and smartwatches", in IEEE Journal of Biomedical and Health Informatics, 28(11), 6594-6605, doi: 10.1109/JBHI.2024.3456169.

Reproducibility

Reproduce online

Click the on the "Binder" badge above to open an interactive Jupyter environment with all required software installed.

Reproduce locally

Install Python 3.8, download the repository, open a command line in the root of the directory and install the required software by executing:

pip install -r requirements.txt

Reproduce locally with Docker

Install Docker for building an image based on a Dockerfile with a Jupyter environment and running a container based on the image.

Download the repository, open a command line in the root of the directory and:

  1. Build the image:
docker build . --tag tug-automation-sp-sw-rp
  1. Run the image:
docker run -it -p 8888:8888 tug-automation-sp-sw-rp
  1. Click on the login link (or copy and paste in the browser) shown in the console to access to a Jupyter environment.

Reproduce the analysis

Open the desired Jupyter Notebook (*.ipynb) file. Each notebook contains the used code and its outputs. You can execute the code to reproduce the obtained results.

Note

When executing an analysis with a component of randomness (i.e., ML models training), the obtained results could be slightly different than the reported ones. Notwithstanding, the conclusions should be similar as the reported ones.

Repository structure

Common files:

  • Dockerfile: a recipe for the computational environment using Docker.
  • requirements.txt: file with the dependencies and versions used through all the code.

Notebooks and code files:

Warning

Retraining the models might take a while. The outcomes of the contained analyses can be reproduced by loading the results in 02_ML/01_splitting-approaches-reports.json.

Directories and data files:

  • 01_SENSOR-DATA:
    • 01_RAW: contains a raw accelerometer and gyroscope data collected from the participants of the study while they were performing the TUG test.
      • sXX: directory containing the raw data obtained from the subject XX. Each directory contains a json file for each TUG execution and for each device. Files have the following naming convention: {subject_id}_{execution}_{sw|sp}.json. It also contains the file sXX_segments.txt, which contains the boundaries between each TUG subphase, manually extracted from video analysis.
      • subjects.csv: information (e.g., age, gender) regarding the participants of the study.
    • 02_CLEAN: contains the processed accelerometer and gyroscope data, where each sample is labelled with an associated activity.
      • 01_TURNING-AND-SITTING: the samples are labelled with the SEATED, STANDING_UP, WALKING, TURNING and SITTING_DOWN activities. Contains a directory for each subject, and each directory has a csv file with the labeled data corresponding to one execution. The csv files follow this format: {subject_id}_{execution}_{sw|sp}.csv
      • 02_TURN-TO-SIT: the samples are labelled with the SEATED, STANDING_UP, WALKING, TURNING and TURN-TO-SIT activities. Contains a directory for each subject, and each directory has a csv file with the labeled data corresponding to one execution. The csv files follow this format: {subject_id}_{execution}_{sw|sp}.csv
      • 01_sp_{acc|gyro}-boundaries.pdf: plots containing accelerometer and gyroscope data and their associated activties. These plots correspond to the Figure 5 of the paper.
    • 03_WINDOWED: contains the windows generated from the clean data.
      • 01_TURNING-AND-SITTING: the windows are labelled with the SEATED, STANDING_UP, WALKING, TURNING and SITTING_DOWN activities. Contains a directory for each subject.
      • 02_TURN-TO-SIT: the windows are labelled with the SEATED, STANDING_UP, WALKING, TURNING and TURN-TO-SIT activities. Contains a directory for each subject.
  • 02_ML: contains the ML models trained with the collected data. Contains:
    • 01_splitting-approaches-reports.json: results from models trained with both splitting approaches.
    • 02_splitting-approaches-comparison.csv: comparison analysing the results of both splitting approaches. This information is reported in the Table II of the paper.
    • 03_sp_data_model.tflite: CNN model trained with the data collected from the smartphone's sensors.
    • 03_sw_data_model.tflite: CNN model trained with the data collected from the smartwatch's sensors.
    • 03_labels.txt: activity labels file embedded into models as metadata.
  • 03_EXPERIMENT: contains the input and the output of the analysis performed about the results of the systems.
    • 01_INPUT: directory with the inputs of the experiment (i.e., results obtained from the TUG system)
      • sXX: directory containing the experiments results of the subject XX. Each directory contains:
        • sXX_{sp|sw}.json: results obtained from the sw and the sp device.
        • sXX_results.csv: results obtained manually from visual inspection.
    • 02_OUTPUT: directory with the results of the analyses.
      • 01_{c1|c2|man}-results.csv: TUG executions measurements from the system and the manual ones.
      • 02_errors.csv: measurement error of each TUG execution and subphases.
      • 03_execution-status.csv: number of executions classified as success, partial_success and failure. This information is reported in the Table III of the paper.
      • 04_error-distribution.pdf: boxplot with the distribution of the measurement errors. This plot corresponds to the Figure 6 of the paper.
      • 05_subjects-rmse.csv: intra-subject measurements RMSE.
      • 05_comparison-rmse.csv: inter-subject measurements RMSE. This information is reported in the Table IV of the paper.
      • 06_{c1|c2}-duration-ba.pdf: Bland-Altman plots of the total duration of the executions. These plots correspond to the Figure 7 of the paper.
      • 07_{c1|c2}-phases-ba.pdf: Bland-Altman plots of the subphases duration of the executions. These plots correspond to the Figure 8 of the paper.
      • 08_icc-results.csv: ICC(2,1) reliability metric comparing each system configuration with the manual results. This information is reported in the Table V of the paper.
  • 04_BATTERY: contains the system's battery consumption information. Contains:
    • bug-reports: bugreports generated after the execution of the TUG system on the devices. The bugreports have the following naming format: br_{sXX[-sYY]}_{sp|sp-paired|sw}.
    • 00_battery-historian.csv: battery consumption data extracted from the bugreports.
    • 01_battery-consumption.csv: battery consumption information processed from the Battery Historian data. This information is reported in the Table VII of the paper.

License

The documents in this repository are licensed under Creative Commons Attribution 4.0 International License.

All contained code is licensed under the Apache License 2.0.

All data used in this repository is licensed under Open Data Commons Attribution License.

Acknowledgements

This work has been funded by the Spanish Ministry of Universities [grants FPU19/05352 and FPU17/03832] and by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) and ''ERDF A way of making Europe'' [grants PID2020-120250RB-I00, PID2022-1404475OB-C21 and PID2022-140475OB-C22].