Skip to content

Latest commit

 

History

History
226 lines (163 loc) · 8.36 KB

client.md

File metadata and controls

226 lines (163 loc) · 8.36 KB
Raw

Implement a FIDL client in Rust

Prerequisites

This tutorial assumes that you are familiar with writing and running a Fuchsia component and with implementing a FIDL server, which are both covered in the FIDL server tutorial. For the full set of FIDL tutorials, refer to the overview.

Overview

This tutorial implements a client for a FIDL protocol and runs it against the server created in the previous tutorial. The client in this tutorial is asynchronous. There is an alternate tutorial for synchronous clients.

If you want to write the code yourself, delete the following directories:

rm -r examples/fidl/rust/client/*

Create the component

Create a new component project at examples/fidl/rust/client:

  1. Add a main() function to examples/fidl/rust/client/src/main.rs:

    fn main() {
  println!("Hello, world!");
}

  2. Declare a target for the client in examples/fidl/rust/client/BUILD.gn:

    {% includecode gerrit_repo="fuchsia/fuchsia" gerrit_path="examples/fidl/rust/client/BUILD.gn" region_tag="imports" %}

# Declare an executable for the client.
rustc_binary("bin") {
  name = "fidl_echo_rust_client"
  edition = "2018"

  sources = [ "src/main.rs" ]
}

{% includecode gerrit_repo="fuchsia/fuchsia" gerrit_path="examples/fidl/rust/client/BUILD.gn" region_tag="rest" %}

  3. Add a component manifest in examples/fidl/rust/client/meta/client.cml:

    Note: The binary name in the manifest must match the output name of the executable defined in the previous step.

    {% includecode gerrit_repo="fuchsia/fuchsia" gerrit_path="examples/fidl/rust/client/meta/client.cml" region_tag="example_snippet" %}

  4. Once you have created your component, ensure that you can add it to the build configuration:

    fx set core.qemu-x64 --with //examples/fidl/rust/client:echo-client

  5. Build the Fuchsia image:

    fx build

Edit GN dependencies

  1. Add the following dependencies to the rustc_binary:

    {% includecode gerrit_repo="fuchsia/fuchsia" gerrit_path="examples/fidl/rust/client/BUILD.gn" region_tag="deps" %}

  2. Then, import them in main.rs:

    {% includecode gerrit_repo="fuchsia/fuchsia" gerrit_path="examples/fidl/rust/client/src/main.rs" region_tag="imports" %}

These dependencies are explained in the server tutorial.

Connect to the server {#main}

The steps in this section explain how to add code to the main() function that connects the client to the server and makes requests to it.

Connect to the server

{% includecode gerrit_repo="fuchsia/fuchsia" gerrit_path="examples/fidl/rust/client/src/main.rs" region_tag="main" highlight="3,4" %}

Under the hood, this call triggers a sequence of events that starts on the client and traces through the server code from the previous tutorial.

  • Initialize a client object, as well as a channel. The client object is bound to one end of the channel.
  • Makes a request to the component framework containing the name of the service to connect to, and the other end of the channel. The name of the service is obtained implicitly using the SERVICE_NAME of EchoMarker template argument, similarly to how the service path is determined on the server end.
  • This client object is returned from connect_to_protocol.

In the background, the request to the component framework gets routed to the server:

  • When this request is received in the server process, it wakes up the async::Executor executor and tells it that the ServiceFs task can now make progress and should be run.
  • The ServiceFs wakes up, sees the request available on the startup handle of the process, and looks up the name of the requested service in the list of (service_name, service_startup_func) provided through calls to add_service, add_fidl_service, etc. If a matching service_name exists, it calls service_startup_func with the provided channel to connect to the new service.
  • IncomingService::Echo is called with a RequestStream (typed-channel) of the Echo FIDL protocol that is registered with add_fidl_service. The incoming request channel is stored in IncomingService::Echo and is added to the stream of incoming requests. for_each_concurrent consumes the ServiceFs into a [Stream] of type IncomingService. A handler is run for each entry in the stream, which matches over the incoming requests and dispatches to the run_echo_server. The resulting futures from each call to run_echo_server are run concurrently when the ServiceFs stream is awaited.
  • When a request is sent on the channel, the channel the Echo service is becomes readable, which wakes up the asynchronous code in the body of run_echo_server.

Send requests to the server

The code makes two requests to the server:

  • An EchoString request
  • A SendString request
{% includecode gerrit_repo="fuchsia/fuchsia" gerrit_path="examples/fidl/rust/client/src/main.rs" region_tag="main" highlight="6,7,8,9,10,11" %}

The call to EchoString returns a future, which resolves to the response returned by the server. The returned future will resolve to an error if there is either an error sending the request or receiving the response (e.g. when decoding the message, or if an epitaph was received).

On the other hand, the call to SendString returns a Result, since it is a fire and forget method. This method call will return an error if there was an issue sending the request.

The bindings reference describes how these proxy methods are generated, and the Fuchsia rustdoc includes documentation for the generated FIDL crates.

Handle incoming events

The code then waits for a single OnString event from the server:

{% includecode gerrit_repo="fuchsia/fuchsia" gerrit_path="examples/fidl/rust/client/src/main.rs" region_tag="main" highlight="12,13,14,15" %}

This is done by taking the event stream from the client object, then waiting for a single event from it.

Run the client

In order for the client and server to communicate using the Echo protocol, component framework must route the fuchsia.examples.Echo capability from the server to the client. For this tutorial, a realm component is provided to declare the appropriate capabilities and routes.

Note: You can explore the full source for the realm component at //examples/fidl/echo-realm

  1. Configure your build to include the provided package that includes the echo realm, server, and client:

    fx set core.qemu-x64 --with //examples/fidl/rust:echo-rust-client

  2. Build the Fuchsia image:

    fx build

  3. Run the echo_realm component. This creates the client and server component instances and routes the capabilities:

    ffx component run fuchsia-pkg://fuchsia.com/echo-rust-client#meta/echo_realm.cm

  4. Start the echo_client instance:

    ffx component start /core/ffx-laboratory:echo_realm/echo_client

The server component starts when the client attempts to connect to the Echo protocol. You should see output similar to the following in the device logs (ffx log):

[echo_server][][I] Listening for incoming connections...
[echo_server][][I] Received EchoString request for string "hello"
[echo_server][][I] Response sent successfully
[echo_client][][I] response: "hello"
[echo_server][][I] Received SendString request for string "hi"
[echo_server][][I] Event sent successfully
[echo_client][][I] Received OnString event for string "hi"

Terminate the realm component to stop execution and clean up the component instances:

ffx component destroy /core/ffx-laboratory:echo_realm