| Objective | Setting | Comments | Link |
|---|---|---|---|
| Getting the good extrusion | Rotation_Distance | mark the filament at 120mm from your extruder, Extrude 100mm, make the calculation to retrieve the good number, TeachingTech webstite include the step/mm calculation, then use my table to get the conversion into Rotation_distance units | Calculation Conversion Table |
| Objective | Setting | Comments | Link |
|---|---|---|---|
| Getting the good width | Flow (Slicer) | Print a 30x30mm cube in vase mode, check the width of the layer | Calculation Conversion Table |
| Section | Setting | Recommended Value | details | Calculation sheet |
|---|---|---|---|---|
| Getting Equalize on the CoreXY principle | Rotation_Distance | Follow the Instruction | Spectroid | Download |
| Objective | Setting | Comments | Link |
|---|---|---|---|
| Getting Equalize on the CoreXY principle | Belt-tension+Print+Rotation_Distance | Print the Octogon and follow the Instruction | Conversion Table |
| Objective | Setting | Comments | Link |
|---|---|---|---|
| Getting the good Z Height | Rotation_Distance | Print a normal 30x30 cube, I personnaly use a raft to absorb the first layer thickness imprecision, mesure it and use the conversion table to find the good value | Conversion Table |
Special Thanks to the helpfull content of Mickael from TeachingTech