Platformio INI settings help - program runs when flashed from Arduino but not PlatformIO

[MATT-ER-HORN]

After a bit work I was able to get a generic "blink.ino" sketch uploaded and running when using the Arudino IDE and the settings found here: https://onstep.groups.io/g/main/message/43912 and changing the upload address to 0x08010000 in the "stm32CubeProg.sh" script. ( 0x08008000 doesn't work even when I use the newer bootloader, not sure why)

However when I upload the same code using platformio the program doesn't run after uploading. Here is my current is .ini file for platformio:

[env:fysetc_s6]
platform = ststm32
board = fysetc_s6
framework = arduino
upload_protocol = dfu
board_upload.offset_address = 0x8010000
build_flags = -D PIO_FRAMEWORK_ARDUINO_ENABLE_CDC -Os

Does anyone have any tips to get the DFU upload working in plaformio for the S6? I assume I could use the same .ini which is used for the marlin build but I can't seem to figure out all the settings since many of the settings are found in separate scripts called by the ini file.

The output from the terminal during the upload:

CONFIGURATION: https://docs.platformio.org/page/boards/ststm32/fysetc_s6.html
HARDWARE: STM32F446VET6 168MHz, 128KB RAM, 512KB Flash
DEBUG: Current (blackmagic) External (blackmagic, cmsis-dap, jlink, stlink)
PACKAGES:

• framework-arduinoststm32 @ 4.20200.221104 (2.2.0)
• framework-cmsis @ 2.50700.210515 (5.7.0)
• tool-dfuutil @ 1.11.0
• tool-openocd @ 2.1100.211028 (11.0)
• tool-stm32duino @ 1.0.2
• toolchain-gccarmnoneeabi @ 1.90201.191206 (9.2.1)
  LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
  LDF Modes: Finder ~ chain, Compatibility ~ soft
  Found 11 compatible libraries
  Scanning dependencies...
  No dependencies
  Building in release mode
  MethodWrapper(["checkprogsize"], [".pio\build\fysetc_s6\firmware.elf"])
  Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
  RAM: [ ] 3.2% (used 4184 bytes from 131072 bytes)
  Flash: [ ] 5.0% (used 26164 bytes from 524288 bytes)
  .pio\build\fysetc_s6\firmware.elf :

section size addr

.isr_vector 452 134217728

.text 23744 134218180

.rodata 1880 134241924

.ARM.extab 0 134243804

.ARM 8 134243804

.preinit_array 0 134243812

.init_array 20 134243812

.fini_array 8 134243832

.data 540 536870912

.bss 3644 536871452

.noinit 0 536875096

._user_heap_stack 1536 536875096

.ARM.attributes 48 0

.comment 102 0

.debug_frame 1360 0

Total 33342
(["upload"], [".pio\build\fysetc_s6\firmware.bin"])
AVAILABLE: blackmagic, cmsis-dap, dfu, jlink, serial, stlink
CURRENT: upload_protocol = dfu
"C:\Users\User.platformio\packages\tool-dfuutil\bin\dfu-util" -d 0x0483:0xDF11 -a 0 -s 0x8010000:leave -D "D:\onedrive\OneDrive - UBC\Documents\PlatformIO\Projects\s6_test_3.pio\build\fysetc_s6\firmware.bin"
dfu-util 0.11

Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2021 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/

Opening DFU capable USB device...
Device ID 0483:df11
Device DFU version 011a
Claiming USB DFU Interface...
Setting Alternate Interface #0 ...
Determining device status...
DFU state(10) = dfuERROR, status(10) = Device's firmware is corrupt. It cannot return to run-time (non-DFU) operations
Clearing status
Determining device status...
DFU state(2) = dfuIDLE, status(0) = No error condition is present
DFU mode device DFU version 011a
Device returned transfer size 2048
DfuSe interface name: "Internal Flash "
Downloading element to address = 0x08010000, size = 26652

Erase [ ] 0% 0 bytes
Erase [ ] 0% 0 bytes
Erase [= ] 7% 2048 bytes
Erase [=== ] 15% 4096 bytes
Erase [===== ] 23% 6144 bytes
Erase [======= ] 30% 8192 bytes
Erase [========= ] 38% 10240 bytes
Erase [=========== ] 46% 12288 bytes
Erase [============= ] 53% 14336 bytes
Erase [=============== ] 61% 16384 bytes
Erase [================= ] 69% 18432 bytes
Erase [=================== ] 76% 20480 bytes
Erase [===================== ] 84% 22528 bytes
Erase [======================= ] 92% 24576 bytes
Erase [======================== ] 99% 26624 bytes
Erase [=========================] 100% 26652 bytes
Erase done.

Download [ ] 0% 0 bytes
Download [= ] 7% 2048 bytes
Download [=== ] 15% 4096 bytes
Download [===== ] 23% 6144 bytes
Download [======= ] 30% 8192 bytes
Download [========= ] 38% 10240 bytes
Download [=========== ] 46% 12288 bytes
Download [============= ] 53% 14336 bytes
Download [=============== ] 61% 16384 bytes
Download [================= ] 69% 18432 bytes
Download [=================== ] 76% 20480 bytes
Download [===================== ] 84% 22528 bytes
Download [======================= ] 92% 24576 bytes
Download [======================== ] 99% 26624 bytes
Download [=========================] 100% 26652 bytes
Download done.
File downloaded successfully
Submitting leave request...
Transitioning to dfuMANIFEST state
====================================================================================== [SUCCESS] Took 12.91 seconds ======================================================================================

• Terminal will be reused by tasks, press any key to close it.

And the blink script I am trying to upload that works using the Arduino IDE
#include <Arduino.h>
/*
Blink
This example code is in the public domain.

https://www.arduino.cc/en/Tutorial/BuiltInExamples/Blink
*/

// the setup function runs once when you press reset or power the board
void setup() {
// initialize digital pin LED_BUILTIN as an output.
pinMode(PB3, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
digitalWrite(PB3, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(PB3, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}
Thanks for your help!