Overhead panel issues

[Ravenslofty]

Here's a non-comprehensive list of the problems I can see with the overhead panel, but I lack the modelling/texturing abilities to fix. None of these seem difficult to me, but they're a lot of paper cut issues.

• the MIN CAB LT should be where the SELCAL(?) currently is.
• the STORM lights should be where the MINCAB currently is.
• the DOME light should be moved further up.
• the text that currently reads RST next to CALLS should be a full RESET.
• there should be a horizontal-and-vertical texture for the fuel valves/crossfeed for when the annunciator lights are in test mode.
• the FUEL LOPR lights should say FEED LO PR
• the PROP BRAKE has a guard to prevent accidental activation.
• the ENG START switch should have a CONT RELIGHT setting to the right of OFF & START ABORT
• the CABIN CARGO door light should have two UNLK lights, one for the cabin, one for the cargo. Same for EMER SVCE.
• the AGENT 1/AGENT 2 buttons need a DISCH/SQUIB texture.
• there are no fire handles.
• the EMER BUS|ESS BUS light should be two up-arrows, not one big triangle.
• the cockpit voice recorder panel is completely missing.
• the text under the blue hydraulic panel is wrong; under BLUE PUMP it should say EMER BRK/FLAPS/SPLRS; under AUX PUMP it should say PROP BRK/N/W STRG.
• the BLUE PUMP and GREEN PUMP indicator light should say OVHT/LO LVL, not just LO LVL.
• the AUX indicator light should say OVHT.
• the hydraulic pumps need a LO PR/OFF texture.
• the emergency location transmitter panel is mostly untextured.