From afe46e085237f57a9edba3f184b1f1614ad2f7ce Mon Sep 17 00:00:00 2001 From: Lukas Pielsticker <50139597+lukaspie@users.noreply.github.com> Date: Fri, 1 Dec 2023 16:19:14 +0100 Subject: [PATCH] Revert "change ref-nexums-mpes.log for test" This reverts commit 23db063b9d21f81b8051d1d87309816101304e6e. --- .../readers/mpes/Ref_nexus_mpes.log | 2296 ++++++++--------- 1 file changed, 1145 insertions(+), 1151 deletions(-) diff --git a/tests/data/dataconverter/readers/mpes/Ref_nexus_mpes.log b/tests/data/dataconverter/readers/mpes/Ref_nexus_mpes.log index 5c701a9c3..b9241804a 100644 --- a/tests/data/dataconverter/readers/mpes/Ref_nexus_mpes.log +++ b/tests/data/dataconverter/readers/mpes/Ref_nexus_mpes.log @@ -5,26 +5,26 @@ NXmpes.nxdl.xml:/ENTRY NXentry.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY): -DEBUG - +DEBUG - DEBUG - documentation (NXentry.nxdl.xml:): -DEBUG - +DEBUG - (**required**) :ref:`NXentry` describes the measurement. - + The top-level NeXus group which contains all the data and associated information that comprise a single measurement. It is mandatory that there is at least one group of this type in the NeXus file. - + DEBUG - ===== ATTRS (//entry@NX_class) -DEBUG - value: NXentry +DEBUG - value: NXentry DEBUG - classpath: ['NXentry'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY NXentry.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== ATTRS (//entry@default) -DEBUG - value: data +DEBUG - value: data DEBUG - classpath: ['NXentry'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY @@ -32,11 +32,11 @@ NXentry.nxdl.xml: DEBUG - NXmpes.nxdl.xml:/ENTRY@default - [NX_CHAR] DEBUG - NXentry.nxdl.xml:@default - [NX_CHAR] DEBUG - documentation (NXentry.nxdl.xml:/default): -DEBUG - +DEBUG - .. index:: find the default plottable data .. index:: plotting .. index:: default attribute value - + Declares which :ref:`NXdata` group contains the data to be shown by default. It is used to resolve ambiguity when @@ -44,25 +44,25 @@ DEBUG - The value :ref:`names ` a child group. If that group itself has a ``default`` attribute, continue this chain until an :ref:`NXdata` group is reached. - + For more information about how NeXus identifies the default plottable data, see the :ref:`Find Plottable Data, v3 ` section. - + DEBUG - ===== FIELD (//entry/collection_time): -DEBUG - value: 2317.343 +DEBUG - value: 2317.343 DEBUG - classpath: ['NXentry', 'NX_FLOAT'] DEBUG - classes: NXentry.nxdl.xml:/collection_time DEBUG - <> DEBUG - documentation (NXentry.nxdl.xml:/collection_time): -DEBUG - +DEBUG - Time transpired actually collecting data i.e. taking out time when collection was suspended due to e.g. temperature out of range - + DEBUG - ===== ATTRS (//entry/collection_time@units) -DEBUG - value: s +DEBUG - value: s DEBUG - classpath: ['NXentry', 'NX_FLOAT'] DEBUG - classes: NXentry.nxdl.xml:/collection_time @@ -75,11 +75,11 @@ NXentry.nxdl.xml:/DATA NXdata.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/DATA): -DEBUG - +DEBUG - DEBUG - documentation (NXentry.nxdl.xml:/DATA): -DEBUG - +DEBUG - The data group - + .. note:: Before the NIAC2016 meeting [#]_, at least one :ref:`NXdata` group was required in each :ref:`NXentry` group. At the NIAC2016 meeting, it was decided to make :ref:`NXdata` @@ -90,81 +90,81 @@ DEBUG - It is permissable to omit the NXdata group only when defining the default plot is not practical or possible from the available data. - + For example, neutron event data may not have anything that makes a useful plot without extensive processing. - + Certain application definitions override this decision and require an :ref:`NXdata` group in the :ref:`NXentry` group. The ``minOccurs=0`` attribute in the application definition will indicate the :ref:`NXdata` group is optional, otherwise, it is required. - + .. [#] NIAC2016: https://www.nexusformat.org/NIAC2016.html, https://github.com/nexusformat/NIAC/issues/16 - + DEBUG - documentation (NXdata.nxdl.xml:): -DEBUG - - :ref:`NXdata` describes the plottable data and related dimension scales. - +DEBUG - + :ref:`NXdata` describes the plottable data and related dimension scales. + .. index:: plotting - + It is strongly recommended that there is at least one :ref:`NXdata` group in each :ref:`NXentry` group. Note that the fields named ``AXISNAME`` and ``DATA`` - can be defined with different names. + can be defined with different names. (Upper case is used to indicate that the actual name is left to the user.) - The ``signal`` and ``axes`` attributes of the - ``data`` group define which items + The ``signal`` and ``axes`` attributes of the + ``data`` group define which items are plottable data and which are *dimension scales*, respectively. - + :ref:`NXdata` is used to implement one of the basic motivations in NeXus, to provide a default plot for the data of this :ref:`NXentry`. The actual data might be stored in another group and (hard) linked to the :ref:`NXdata` group. * Each :ref:`NXdata` group will define one field as the default plottable data. The value of the ``signal`` attribute names this field. - Additional fields may be used to describe the dimension scales and + Additional fields may be used to describe the dimension scales and uncertainities. The ``auxiliary_signals`` attribute is a list of the other fields to be plotted with the ``signal`` data. * The plottable data may be of arbitrary rank up to a maximum of ``NX_MAXRANK=32`` (for compatibility with backend file formats). - * The plottable data will be named as the value of + * The plottable data will be named as the value of the group ``signal`` attribute, such as:: - + data:NXdata @signal = "counts" @axes = "mr" @mr_indices = 0 counts: float[100] --> the default dependent data mr: float[100] --> the default independent data - + The field named in the ``signal`` attribute **must** exist, either directly as a NeXus field or defined through a link. - + * The group ``axes`` attribute will name the *dimension scale* associated with the plottable data. If available, the standard deviations of the data are to be - stored in a data set of the same rank and dimensions, with the name ``errors``. + stored in a data set of the same rank and dimensions, with the name ``errors``. * For each data dimension, there should be a one-dimensional array of the same length. * These one-dimensional arrays are the *dimension scales* of the data, *i.e*. the values of the independent variables at which the data is measured, such as scattering angle or energy transfer. - + .. index:: link .. index:: axes (attribute) - + The preferred method to associate each data dimension with its respective dimension scale is to specify the field name of each dimension scale in the group ``axes`` attribute as a string list. - Here is an example for a 2-D data set *data* plotted - against *time*, and *pressure*. (An additional *temperature* data set + Here is an example for a 2-D data set *data* plotted + against *time*, and *pressure*. (An additional *temperature* data set is provided and could be selected as an alternate for the *pressure* axis.):: data_2d:NXdata @@ -179,17 +179,17 @@ DEBUG - time: float[1000] .. rubric:: Old methods to identify the plottable data - - There are two older methods of associating + + There are two older methods of associating each data dimension to its respective dimension scale. Both are now out of date and should not be used when writing new data files. However, client software should expect to see data files written with any of these methods. - - * One method uses the ``axes`` + + * One method uses the ``axes`` attribute to specify the names of each *dimension scale*. - + * The oldest method uses the ``axis`` attribute on each *dimension scale* to identify with an integer the axis whose value is the number of the dimension. @@ -199,7 +199,7 @@ DEBUG - units dimension scale - Each axis of the plot may be labeled with information from the + Each axis of the plot may be labeled with information from the dimension scale for that axis. The optional ``@long_name`` attribute is provided as the axis label default. If ``@long_name`` is not defined, then use the name of the dimension scale. A ``@units`` attribute, @@ -213,21 +213,21 @@ DEBUG - group, look for a ``title`` field in the parent :ref:`NXentry` group, with a fallback to displaying the path to the :ref:`NXdata` group. - NeXus is about how to find and annotate the data to be plotted + NeXus is about how to find and annotate the data to be plotted but not to describe how the data is to be plotted. (https://www.nexusformat.org/NIAC2018Minutes.html#nxdata-plottype--attribute) - + DEBUG - ===== ATTRS (//entry/data@NX_class) -DEBUG - value: NXdata +DEBUG - value: NXdata DEBUG - classpath: ['NXentry', 'NXdata'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/DATA NXentry.nxdl.xml:/DATA NXdata.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== ATTRS (//entry/data@axes) -DEBUG - value: ['kx' 'ky' 'energy' 'delay'] +DEBUG - value: ['kx' 'ky' 'energy' 'delay'] DEBUG - classpath: ['NXentry', 'NXdata'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/DATA @@ -236,78 +236,78 @@ NXdata.nxdl.xml: DEBUG - NXdata.nxdl.xml:@axes - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXdata.nxdl.xml:/axes): -DEBUG - +DEBUG - .. index:: plotting - + Array of strings holding the :ref:`names ` of the independent data fields used in the default plot for all of the dimensions of the :ref:`signal ` as well as any :ref:`auxiliary signals `. - + One name is provided for every dimension in the *signal* or *auxiliary signal* fields. - + The *axes* values are the names of fields or links that *must* exist and be direct children of this NXdata group. An axis slice is specified using a field named ``AXISNAME_indices`` as described below (where the text shown here as ``AXISNAME`` is to be replaced by the actual field name). - - When no default axis is available for a particular dimension - of the plottable data, use a "." in that position. + + When no default axis is available for a particular dimension + of the plottable data, use a "." in that position. Such as:: - + @axes=["time", ".", "."] - + Since there are three items in the list, the *signal* field must be a three-dimensional array (rank=3). The first dimension is described by the values of a one-dimensional array named ``time`` while the other two dimensions have no fields to be used as dimension scales. - + See examples provided on the NeXus wiki: https://www.nexusformat.org/2014_axes_and_uncertainties.html - - If there are no axes at all (such as with a stack of images), + + If there are no axes at all (such as with a stack of images), the axes attribute can be omitted. - + DEBUG - ===== ATTRS (//entry/data@delay_indices) -DEBUG - value: 3 +DEBUG - value: 3 DEBUG - classpath: ['NXentry', 'NXdata'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/DATA NXentry.nxdl.xml:/DATA NXdata.nxdl.xml: DEBUG - @delay_indices - IS NOT IN SCHEMA -DEBUG - +DEBUG - DEBUG - ===== ATTRS (//entry/data@energy_indices) -DEBUG - value: 2 +DEBUG - value: 2 DEBUG - classpath: ['NXentry', 'NXdata'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/DATA NXentry.nxdl.xml:/DATA NXdata.nxdl.xml: DEBUG - @energy_indices - IS NOT IN SCHEMA -DEBUG - +DEBUG - DEBUG - ===== ATTRS (//entry/data@kx_indices) -DEBUG - value: 0 +DEBUG - value: 0 DEBUG - classpath: ['NXentry', 'NXdata'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/DATA NXentry.nxdl.xml:/DATA NXdata.nxdl.xml: DEBUG - @kx_indices - IS NOT IN SCHEMA -DEBUG - +DEBUG - DEBUG - ===== ATTRS (//entry/data@ky_indices) -DEBUG - value: 1 +DEBUG - value: 1 DEBUG - classpath: ['NXentry', 'NXdata'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/DATA NXentry.nxdl.xml:/DATA NXdata.nxdl.xml: DEBUG - @ky_indices - IS NOT IN SCHEMA -DEBUG - +DEBUG - DEBUG - ===== ATTRS (//entry/data@signal) -DEBUG - value: data +DEBUG - value: data DEBUG - classpath: ['NXentry', 'NXdata'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/DATA @@ -318,23 +318,23 @@ DEBUG - <> DEBUG - enumeration (NXmpes.nxdl.xml:/ENTRY/DATA/signal): DEBUG - -> data DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/DATA/signal): -DEBUG - +DEBUG - DEBUG - NXdata.nxdl.xml:@signal - [NX_CHAR] DEBUG - documentation (NXdata.nxdl.xml:/signal): -DEBUG - +DEBUG - .. index:: find the default plottable data .. index:: plotting .. index:: signal attribute value - - Declares which NeXus field is the default. + + Declares which NeXus field is the default. The value is the :ref:`name ` of the data field to be plotted. This field or link *must* exist and be a direct child of this NXdata group. - + It is recommended (as of NIAC2014) to use this attribute rather than adding a signal attribute to the field. See https://www.nexusformat.org/2014_How_to_find_default_data.html for a summary of the discussion. - + DEBUG - ===== FIELD (//entry/data/data): DEBUG - value: [[[1.14760e+04 1.64560e+04 1.55440e+04 1.48940e+04 1.08810e+04] ... DEBUG - classpath: ['NXentry', 'NXdata', 'NX_NUMBER'] @@ -344,25 +344,25 @@ NXdata.nxdl.xml:/DATA DEBUG - <> DEBUG - Dataset referenced as NXdata SIGNAL DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/DATA/data): -DEBUG - +DEBUG - Represents a measure of one- or more-dimensional photoemission counts, where the varied axis may be for example energy, momentum, spatial coordinate, pump-probe delay, spin index, temperature, etc. The axes traces should be linked to the actual encoder position in NXinstrument or calibrated axes in NXprocess. - + DEBUG - documentation (NXdata.nxdl.xml:/DATA): -DEBUG - +DEBUG - .. index:: plotting - - This field contains the data values to be used as the + + This field contains the data values to be used as the NeXus *plottable data*. Client is responsible for defining the dimensions of the data. The name of this field may be changed to fit the circumstances. Standard NeXus client tools will use the attributes to determine how to use this field. - + DEBUG - ===== ATTRS (//entry/data/data@units) -DEBUG - value: counts +DEBUG - value: counts DEBUG - classpath: ['NXentry', 'NXdata', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/DATA/data @@ -370,22 +370,22 @@ NXdata.nxdl.xml:/DATA DEBUG - NXmpes.nxdl.xml:/ENTRY/DATA/data@units [NX_ANY] DEBUG - NXdata.nxdl.xml:/DATA@units - REQUIRED, but undefined unit category DEBUG - ===== FIELD (//entry/data/delay): -DEBUG - value: [-2000. 125. 2250. 4375. 6500.] +DEBUG - value: [-2000. 125. 2250. 4375. 6500.] DEBUG - classpath: ['NXentry', 'NXdata', 'NX_NUMBER'] DEBUG - classes: NXdata.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - Dataset referenced as NXdata AXIS #3 DEBUG - documentation (NXdata.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Dimension scale defining an axis of the data. Client is responsible for defining the dimensions of the data. The name of this field may be changed to fit the circumstances. Standard NeXus client tools will use the attributes to determine how to use this field. - + DEBUG - ===== ATTRS (//entry/data/delay@units) -DEBUG - value: ps +DEBUG - value: ps DEBUG - classpath: ['NXentry', 'NXdata', 'NX_NUMBER'] DEBUG - classes: NXdata.nxdl.xml:/AXISNAME @@ -398,15 +398,15 @@ NXdata.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - Dataset referenced as NXdata AXIS #2 DEBUG - documentation (NXdata.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Dimension scale defining an axis of the data. Client is responsible for defining the dimensions of the data. The name of this field may be changed to fit the circumstances. Standard NeXus client tools will use the attributes to determine how to use this field. - + DEBUG - ===== ATTRS (//entry/data/energy@units) -DEBUG - value: eV +DEBUG - value: eV DEBUG - classpath: ['NXentry', 'NXdata', 'NX_NUMBER'] DEBUG - classes: NXdata.nxdl.xml:/AXISNAME @@ -419,15 +419,15 @@ NXdata.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - Dataset referenced as NXdata AXIS #0 DEBUG - documentation (NXdata.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Dimension scale defining an axis of the data. Client is responsible for defining the dimensions of the data. The name of this field may be changed to fit the circumstances. Standard NeXus client tools will use the attributes to determine how to use this field. - + DEBUG - ===== ATTRS (//entry/data/kx@units) -DEBUG - value: 1/A +DEBUG - value: 1/A DEBUG - classpath: ['NXentry', 'NXdata', 'NX_NUMBER'] DEBUG - classes: NXdata.nxdl.xml:/AXISNAME @@ -440,21 +440,21 @@ NXdata.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - Dataset referenced as NXdata AXIS #1 DEBUG - documentation (NXdata.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Dimension scale defining an axis of the data. Client is responsible for defining the dimensions of the data. The name of this field may be changed to fit the circumstances. Standard NeXus client tools will use the attributes to determine how to use this field. - + DEBUG - ===== ATTRS (//entry/data/ky@units) -DEBUG - value: 1/A +DEBUG - value: 1/A DEBUG - classpath: ['NXentry', 'NXdata', 'NX_NUMBER'] DEBUG - classes: NXdata.nxdl.xml:/AXISNAME DEBUG - NXdata.nxdl.xml:/AXISNAME@units - REQUIRED, but undefined unit category DEBUG - ===== FIELD (//entry/definition): -DEBUG - value: b'NXmpes' +DEBUG - value: b'NXmpes' DEBUG - classpath: ['NXentry', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/definition @@ -463,26 +463,26 @@ DEBUG - <> DEBUG - enumeration (NXmpes.nxdl.xml:/ENTRY/definition): DEBUG - -> NXmpes DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/definition): -DEBUG - +DEBUG - DEBUG - documentation (NXentry.nxdl.xml:/definition): -DEBUG - +DEBUG - (alternate use: see same field in :ref:`NXsubentry` for preferred) - + Official NeXus NXDL schema to which this entry conforms which must be the name of the NXDL file (case sensitive without the file extension) that the NXDL schema is defined in. - + For example the ``definition`` field for a file that conformed to the *NXarpes.nxdl.xml* definition must contain the string **NXarpes**. - + This field is provided so that :ref:`NXentry` can be the overlay position in a NeXus data file for an application definition and its set of groups, fields, and attributes. - + *It is advised* to use :ref:`NXsubentry`, instead, as the overlay position. - + DEBUG - ===== ATTRS (//entry/definition@version) -DEBUG - value: None +DEBUG - value: None DEBUG - classpath: ['NXentry', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/definition @@ -490,78 +490,78 @@ NXentry.nxdl.xml:/definition DEBUG - NXmpes.nxdl.xml:/ENTRY/definition@version - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/definition/version): -DEBUG - +DEBUG - DEBUG - NXentry.nxdl.xml:/definition@version - [NX_CHAR] DEBUG - documentation (NXentry.nxdl.xml:/definition/version): -DEBUG - +DEBUG - NXDL version number - + DEBUG - ===== FIELD (//entry/duration): -DEBUG - value: 2317 +DEBUG - value: 2317 DEBUG - classpath: ['NXentry', 'NX_INT'] DEBUG - classes: NXentry.nxdl.xml:/duration DEBUG - <> DEBUG - documentation (NXentry.nxdl.xml:/duration): -DEBUG - +DEBUG - Duration of measurement - + DEBUG - ===== ATTRS (//entry/duration@units) -DEBUG - value: s +DEBUG - value: s DEBUG - classpath: ['NXentry', 'NX_INT'] DEBUG - classes: NXentry.nxdl.xml:/duration DEBUG - NXentry.nxdl.xml:/duration@units [NX_TIME] DEBUG - ===== FIELD (//entry/end_time): -DEBUG - value: b'2019-05-23T18:52:32+00:00' +DEBUG - value: b'2019-05-23T18:52:32+00:00' DEBUG - classpath: ['NXentry', 'NX_DATE_TIME'] DEBUG - classes: NXentry.nxdl.xml:/end_time DEBUG - <> DEBUG - documentation (NXentry.nxdl.xml:/end_time): -DEBUG - +DEBUG - Ending time of measurement - + DEBUG - ===== FIELD (//entry/entry_identifier): -DEBUG - value: b'2019/2019_05/2019_05_23/Scan005' +DEBUG - value: b'2019/2019_05/2019_05_23/Scan005' DEBUG - classpath: ['NXentry', 'NX_CHAR'] DEBUG - classes: NXentry.nxdl.xml:/entry_identifier DEBUG - <> DEBUG - documentation (NXentry.nxdl.xml:/entry_identifier): -DEBUG - +DEBUG - unique identifier for the measurement, defined by the facility. - + DEBUG - ===== FIELD (//entry/experiment_facility): -DEBUG - value: b'Time Resolved ARPES' +DEBUG - value: b'Time Resolved ARPES' DEBUG - classpath: ['NXentry', 'NX_CHAR'] DEBUG - classes: NXentry.nxdl.xml:/experiment_facility DEBUG - <> DEBUG - documentation (NXentry.nxdl.xml:/experiment_facility): -DEBUG - +DEBUG - Name of the experimental facility - + DEBUG - ===== FIELD (//entry/experiment_institution): -DEBUG - value: b'Fritz Haber Institute - Max Planck Society' +DEBUG - value: b'Fritz Haber Institute - Max Planck Society' DEBUG - classpath: ['NXentry', 'NX_CHAR'] DEBUG - classes: NXentry.nxdl.xml:/experiment_institution DEBUG - <> DEBUG - documentation (NXentry.nxdl.xml:/experiment_institution): -DEBUG - +DEBUG - Name of the institution hosting the facility - + DEBUG - ===== FIELD (//entry/experiment_laboratory): -DEBUG - value: b'Clean Room 4' +DEBUG - value: b'Clean Room 4' DEBUG - classpath: ['NXentry', 'NX_CHAR'] DEBUG - classes: NXentry.nxdl.xml:/experiment_laboratory DEBUG - <> DEBUG - documentation (NXentry.nxdl.xml:/experiment_laboratory): -DEBUG - +DEBUG - Name of the laboratory or beamline - + DEBUG - ===== GROUP (//entry/instrument [NXmpes::/NXentry/NXinstrument]): DEBUG - classpath: ['NXentry', 'NXinstrument'] DEBUG - classes: @@ -570,29 +570,29 @@ NXentry.nxdl.xml:/INSTRUMENT NXinstrument.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT): -DEBUG - +DEBUG - DEBUG - documentation (NXentry.nxdl.xml:/INSTRUMENT): -DEBUG - +DEBUG - DEBUG - documentation (NXinstrument.nxdl.xml:): -DEBUG - +DEBUG - Collection of the components of the instrument or beamline. - + Template of instrument descriptions comprising various beamline components. Each component will also be a NeXus group defined by its distance from the sample. Negative distances represent beamline components that are before the sample while positive distances represent components that are after the sample. This device allows the unique identification of beamline components in a way that is valid for both reactor and pulsed instrumentation. - + DEBUG - ===== ATTRS (//entry/instrument@NX_class) -DEBUG - value: NXinstrument +DEBUG - value: NXinstrument DEBUG - classpath: ['NXentry', 'NXinstrument'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT NXentry.nxdl.xml:/INSTRUMENT NXinstrument.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== GROUP (//entry/instrument/beam [NXmpes::/NXentry/NXinstrument/NXbeam]): DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam'] DEBUG - classes: @@ -601,13 +601,13 @@ NXinstrument.nxdl.xml:/BEAM NXbeam.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM): -DEBUG - +DEBUG - DEBUG - documentation (NXinstrument.nxdl.xml:/BEAM): -DEBUG - +DEBUG - DEBUG - documentation (NXbeam.nxdl.xml:): -DEBUG - +DEBUG - Properties of the neutron or X-ray beam at a given location. - + This group is intended to be referenced by beamline component groups within the :ref:`NXinstrument` group or by the :ref:`NXsample` group. This group is especially valuable in storing the results of instrument simulations in which it is useful @@ -617,70 +617,70 @@ DEBUG - considered as a beamline component and this group may be defined as a subgroup directly inside :ref:`NXinstrument`, in which case it is recommended that the position of the beam is specified by an :ref:`NXtransformations` group, unless the beam is at the origin (which is the sample). - + Note that incident_wavelength and related fields can be a scalar values or arrays, depending on the use case. To support these use cases, the explicit dimensionality of these fields is not specified, but it can be inferred by the presense of and shape of accompanying fields, such as incident_wavelength_weights for a polychromatic beam. - + DEBUG - ===== ATTRS (//entry/instrument/beam@NX_class) -DEBUG - value: NXbeam +DEBUG - value: NXbeam DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM NXinstrument.nxdl.xml:/BEAM NXbeam.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/beam/distance): -DEBUG - value: 0.0 +DEBUG - value: 0.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/distance DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/distance): -DEBUG - +DEBUG - Distance of the point of evaluation of the beam from the sample surface. - + DEBUG - ===== ATTRS (//entry/instrument/beam/distance@units) -DEBUG - value: mm +DEBUG - value: mm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/distance DEBUG - NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/distance@units [NX_LENGTH] DEBUG - ===== FIELD (//entry/instrument/beam/extent): -DEBUG - value: [ 80. 190.] +DEBUG - value: [ 80. 190.] DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/extent DEBUG - <> DEBUG - documentation (NXbeam.nxdl.xml:/extent): -DEBUG - +DEBUG - Size of the beam entering this component. Note this represents a rectangular beam aperture, and values represent FWHM - + DEBUG - ===== ATTRS (//entry/instrument/beam/extent@units) -DEBUG - value: µm +DEBUG - value: µm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/extent DEBUG - NXbeam.nxdl.xml:/extent@units [NX_LENGTH] DEBUG - ===== FIELD (//entry/instrument/beam/incident_energy): -DEBUG - value: 21.7 +DEBUG - value: 21.7 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy NXbeam.nxdl.xml:/incident_energy DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy): -DEBUG - +DEBUG - DEBUG - documentation (NXbeam.nxdl.xml:/incident_energy): -DEBUG - +DEBUG - Energy carried by each particle of the beam on entering the beamline component. - + In the case of a monochromatic beam this is the scalar energy. Several other use cases are permitted, depending on the presence of other incident_energy_X fields. - + * In the case of a polychromatic beam this is an array of length m of energies, with the relative weights in incident_energy_weights. * In the case of a monochromatic beam that varies shot-to-shot, this is an array of energies, one for each recorded shot. Here, incident_energy_weights and incident_energy_spread are not set. @@ -688,12 +688,12 @@ DEBUG - this is an array of length m with the relative weights in incident_energy_weights as a 2D array. * In the case of a polychromatic beam that varies shot-to-shot and where the channels also vary, this is a 2D array of dimensions nP by m (slow to fast) with the relative weights in incident_energy_weights as a 2D array. - + Note, variants are a good way to represent several of these use cases in a single dataset, e.g. if a calibrated, single-value energy value is available along with the original spectrum from which it was calibrated. - + DEBUG - ===== ATTRS (//entry/instrument/beam/incident_energy@units) -DEBUG - value: eV +DEBUG - value: eV DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy @@ -701,23 +701,23 @@ NXbeam.nxdl.xml:/incident_energy DEBUG - NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy@units [NX_ENERGY] DEBUG - NXbeam.nxdl.xml:/incident_energy@units [NX_ENERGY] DEBUG - ===== FIELD (//entry/instrument/beam/incident_energy_spread): -DEBUG - value: 0.11 +DEBUG - value: 0.11 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy_spread NXbeam.nxdl.xml:/incident_energy_spread DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy_spread): -DEBUG - +DEBUG - DEBUG - documentation (NXbeam.nxdl.xml:/incident_energy_spread): -DEBUG - +DEBUG - The energy spread FWHM for the corresponding energy(ies) in incident_energy. In the case of shot-to-shot variation in the energy spread, this is a 2D array of dimension nP by m (slow to fast) of the spreads of the corresponding wavelength in incident_wavelength. - + DEBUG - ===== ATTRS (//entry/instrument/beam/incident_energy_spread@units) -DEBUG - value: eV +DEBUG - value: eV DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy_spread @@ -725,21 +725,21 @@ NXbeam.nxdl.xml:/incident_energy_spread DEBUG - NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy_spread@units [NX_ENERGY] DEBUG - NXbeam.nxdl.xml:/incident_energy_spread@units [NX_ENERGY] DEBUG - ===== FIELD (//entry/instrument/beam/incident_polarization): -DEBUG - value: [1. 1. 0. 0.] +DEBUG - value: [1. 1. 0. 0.] DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_polarization NXbeam.nxdl.xml:/incident_polarization DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_polarization): -DEBUG - +DEBUG - DEBUG - documentation (NXbeam.nxdl.xml:/incident_polarization): -DEBUG - +DEBUG - Incident polarization as a Stokes vector on entering beamline component - + DEBUG - ===== ATTRS (//entry/instrument/beam/incident_polarization@units) -DEBUG - value: V^2/mm^2 +DEBUG - value: V^2/mm^2 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_polarization @@ -747,17 +747,17 @@ NXbeam.nxdl.xml:/incident_polarization DEBUG - NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_polarization@units [NX_ANY] DEBUG - NXbeam.nxdl.xml:/incident_polarization@units [NX_ANY] DEBUG - ===== FIELD (//entry/instrument/beam/pulse_duration): -DEBUG - value: 20.0 +DEBUG - value: 20.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/pulse_duration DEBUG - <> DEBUG - documentation (NXbeam.nxdl.xml:/pulse_duration): -DEBUG - +DEBUG - FWHM duration of the pulses at the diagnostic point - + DEBUG - ===== ATTRS (//entry/instrument/beam/pulse_duration@units) -DEBUG - value: fs +DEBUG - value: fs DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/pulse_duration @@ -770,13 +770,13 @@ NXinstrument.nxdl.xml:/BEAM NXbeam.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM): -DEBUG - +DEBUG - DEBUG - documentation (NXinstrument.nxdl.xml:/BEAM): -DEBUG - +DEBUG - DEBUG - documentation (NXbeam.nxdl.xml:): -DEBUG - +DEBUG - Properties of the neutron or X-ray beam at a given location. - + This group is intended to be referenced by beamline component groups within the :ref:`NXinstrument` group or by the :ref:`NXsample` group. This group is especially valuable in storing the results of instrument simulations in which it is useful @@ -786,102 +786,102 @@ DEBUG - considered as a beamline component and this group may be defined as a subgroup directly inside :ref:`NXinstrument`, in which case it is recommended that the position of the beam is specified by an :ref:`NXtransformations` group, unless the beam is at the origin (which is the sample). - + Note that incident_wavelength and related fields can be a scalar values or arrays, depending on the use case. To support these use cases, the explicit dimensionality of these fields is not specified, but it can be inferred by the presense of and shape of accompanying fields, such as incident_wavelength_weights for a polychromatic beam. - + DEBUG - ===== ATTRS (//entry/instrument/beam_pump@NX_class) -DEBUG - value: NXbeam +DEBUG - value: NXbeam DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM NXinstrument.nxdl.xml:/BEAM NXbeam.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/beam_pump/average_power): -DEBUG - value: 444.0 +DEBUG - value: 444.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/average_power DEBUG - <> DEBUG - documentation (NXbeam.nxdl.xml:/average_power): -DEBUG - +DEBUG - Average power at the diagnostic point - + DEBUG - ===== ATTRS (//entry/instrument/beam_pump/average_power@units) -DEBUG - value: mW +DEBUG - value: mW DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/average_power DEBUG - NXbeam.nxdl.xml:/average_power@units [NX_POWER] DEBUG - ===== FIELD (//entry/instrument/beam_pump/distance): -DEBUG - value: 0.0 +DEBUG - value: 0.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/distance DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/distance): -DEBUG - +DEBUG - Distance of the point of evaluation of the beam from the sample surface. - + DEBUG - ===== ATTRS (//entry/instrument/beam_pump/distance@units) -DEBUG - value: mm +DEBUG - value: mm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/distance DEBUG - NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/distance@units [NX_LENGTH] DEBUG - ===== FIELD (//entry/instrument/beam_pump/extent): -DEBUG - value: [155. 367.] +DEBUG - value: [155. 367.] DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/extent DEBUG - <> DEBUG - documentation (NXbeam.nxdl.xml:/extent): -DEBUG - +DEBUG - Size of the beam entering this component. Note this represents a rectangular beam aperture, and values represent FWHM - + DEBUG - ===== ATTRS (//entry/instrument/beam_pump/extent@units) -DEBUG - value: µm +DEBUG - value: µm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/extent DEBUG - NXbeam.nxdl.xml:/extent@units [NX_LENGTH] DEBUG - ===== FIELD (//entry/instrument/beam_pump/fluence): -DEBUG - value: 1.3 +DEBUG - value: 1.3 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/fluence DEBUG - <> DEBUG - documentation (NXbeam.nxdl.xml:/fluence): -DEBUG - +DEBUG - Incident fluence at the diagnostic point - + DEBUG - ===== ATTRS (//entry/instrument/beam_pump/fluence@units) -DEBUG - value: mJ/cm^2 +DEBUG - value: mJ/cm^2 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/fluence DEBUG - NXbeam.nxdl.xml:/fluence@units [NX_ANY] DEBUG - ===== FIELD (//entry/instrument/beam_pump/incident_energy): -DEBUG - value: 1.2 +DEBUG - value: 1.2 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy NXbeam.nxdl.xml:/incident_energy DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy): -DEBUG - +DEBUG - DEBUG - documentation (NXbeam.nxdl.xml:/incident_energy): -DEBUG - +DEBUG - Energy carried by each particle of the beam on entering the beamline component. - + In the case of a monochromatic beam this is the scalar energy. Several other use cases are permitted, depending on the presence of other incident_energy_X fields. - + * In the case of a polychromatic beam this is an array of length m of energies, with the relative weights in incident_energy_weights. * In the case of a monochromatic beam that varies shot-to-shot, this is an array of energies, one for each recorded shot. Here, incident_energy_weights and incident_energy_spread are not set. @@ -889,12 +889,12 @@ DEBUG - this is an array of length m with the relative weights in incident_energy_weights as a 2D array. * In the case of a polychromatic beam that varies shot-to-shot and where the channels also vary, this is a 2D array of dimensions nP by m (slow to fast) with the relative weights in incident_energy_weights as a 2D array. - + Note, variants are a good way to represent several of these use cases in a single dataset, e.g. if a calibrated, single-value energy value is available along with the original spectrum from which it was calibrated. - + DEBUG - ===== ATTRS (//entry/instrument/beam_pump/incident_energy@units) -DEBUG - value: eV +DEBUG - value: eV DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy @@ -902,23 +902,23 @@ NXbeam.nxdl.xml:/incident_energy DEBUG - NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy@units [NX_ENERGY] DEBUG - NXbeam.nxdl.xml:/incident_energy@units [NX_ENERGY] DEBUG - ===== FIELD (//entry/instrument/beam_pump/incident_energy_spread): -DEBUG - value: 0.05 +DEBUG - value: 0.05 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy_spread NXbeam.nxdl.xml:/incident_energy_spread DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy_spread): -DEBUG - +DEBUG - DEBUG - documentation (NXbeam.nxdl.xml:/incident_energy_spread): -DEBUG - +DEBUG - The energy spread FWHM for the corresponding energy(ies) in incident_energy. In the case of shot-to-shot variation in the energy spread, this is a 2D array of dimension nP by m (slow to fast) of the spreads of the corresponding wavelength in incident_wavelength. - + DEBUG - ===== ATTRS (//entry/instrument/beam_pump/incident_energy_spread@units) -DEBUG - value: eV +DEBUG - value: eV DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy_spread @@ -926,21 +926,21 @@ NXbeam.nxdl.xml:/incident_energy_spread DEBUG - NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_energy_spread@units [NX_ENERGY] DEBUG - NXbeam.nxdl.xml:/incident_energy_spread@units [NX_ENERGY] DEBUG - ===== FIELD (//entry/instrument/beam_pump/incident_polarization): -DEBUG - value: [1 1 0 0] +DEBUG - value: [1 1 0 0] DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_polarization NXbeam.nxdl.xml:/incident_polarization DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_polarization): -DEBUG - +DEBUG - DEBUG - documentation (NXbeam.nxdl.xml:/incident_polarization): -DEBUG - +DEBUG - Incident polarization as a Stokes vector on entering beamline component - + DEBUG - ===== ATTRS (//entry/instrument/beam_pump/incident_polarization@units) -DEBUG - value: V^2/mm^2 +DEBUG - value: V^2/mm^2 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_NUMBER'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_polarization @@ -948,80 +948,80 @@ NXbeam.nxdl.xml:/incident_polarization DEBUG - NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/BEAM/incident_polarization@units [NX_ANY] DEBUG - NXbeam.nxdl.xml:/incident_polarization@units [NX_ANY] DEBUG - ===== FIELD (//entry/instrument/beam_pump/incident_wavelength): -DEBUG - value: 1030.0 +DEBUG - value: 1030.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/incident_wavelength DEBUG - <> DEBUG - documentation (NXbeam.nxdl.xml:/incident_wavelength): -DEBUG - +DEBUG - In the case of a monochromatic beam this is the scalar wavelength. - + Several other use cases are permitted, depending on the presence or absence of other incident_wavelength_X fields. - + In the case of a polychromatic beam this is an array of length **m** of wavelengths, with the relative weights in ``incident_wavelength_weights``. - + In the case of a monochromatic beam that varies shot- to-shot, this is an array of wavelengths, one for each recorded shot. Here, ``incident_wavelength_weights`` and incident_wavelength_spread are not set. - + In the case of a polychromatic beam that varies shot-to- shot, this is an array of length **m** with the relative weights in ``incident_wavelength_weights`` as a 2D array. - + In the case of a polychromatic beam that varies shot-to- shot and where the channels also vary, this is a 2D array of dimensions **nP** by **m** (slow to fast) with the relative weights in ``incident_wavelength_weights`` as a 2D array. - + Note, :ref:`variants ` are a good way to represent several of these use cases in a single dataset, e.g. if a calibrated, single-value wavelength value is available along with the original spectrum from which it was calibrated. Wavelength on entering beamline component - + DEBUG - ===== ATTRS (//entry/instrument/beam_pump/incident_wavelength@units) -DEBUG - value: nm +DEBUG - value: nm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/incident_wavelength DEBUG - NXbeam.nxdl.xml:/incident_wavelength@units [NX_WAVELENGTH] DEBUG - ===== FIELD (//entry/instrument/beam_pump/pulse_duration): -DEBUG - value: 140.0 +DEBUG - value: 140.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/pulse_duration DEBUG - <> DEBUG - documentation (NXbeam.nxdl.xml:/pulse_duration): -DEBUG - +DEBUG - FWHM duration of the pulses at the diagnostic point - + DEBUG - ===== ATTRS (//entry/instrument/beam_pump/pulse_duration@units) -DEBUG - value: fs +DEBUG - value: fs DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/pulse_duration DEBUG - NXbeam.nxdl.xml:/pulse_duration@units [NX_TIME] DEBUG - ===== FIELD (//entry/instrument/beam_pump/pulse_energy): -DEBUG - value: 0.889 +DEBUG - value: 0.889 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/pulse_energy DEBUG - <> DEBUG - documentation (NXbeam.nxdl.xml:/pulse_energy): -DEBUG - +DEBUG - Energy of a single pulse at the diagnostic point - + DEBUG - ===== ATTRS (//entry/instrument/beam_pump/pulse_energy@units) -DEBUG - value: µJ +DEBUG - value: µJ DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXbeam', 'NX_FLOAT'] DEBUG - classes: NXbeam.nxdl.xml:/pulse_energy @@ -1033,19 +1033,19 @@ NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER NXelectronanalyser.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER): -DEBUG - +DEBUG - DEBUG - documentation (NXelectronanalyser.nxdl.xml:): -DEBUG - +DEBUG - Subclass of NXinstrument to describe a photoelectron analyser. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser@NX_class) -DEBUG - value: NXelectronanalyser +DEBUG - value: NXelectronanalyser DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER NXelectronanalyser.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== GROUP (//entry/instrument/electronanalyser/collectioncolumn [NXmpes::/NXentry/NXinstrument/NXelectronanalyser/NXcollectioncolumn]): DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn'] DEBUG - classes: @@ -1054,25 +1054,25 @@ NXelectronanalyser.nxdl.xml:/COLLECTIONCOLUMN NXcollectioncolumn.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN): -DEBUG - +DEBUG - DEBUG - documentation (NXelectronanalyser.nxdl.xml:/COLLECTIONCOLUMN): -DEBUG - +DEBUG - Describes the electron collection (spatial and momentum imaging) column - + DEBUG - documentation (NXcollectioncolumn.nxdl.xml:): -DEBUG - +DEBUG - Subclass of NXelectronanalyser to describe the electron collection column of a photoelectron analyser. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn@NX_class) -DEBUG - value: NXcollectioncolumn +DEBUG - value: NXcollectioncolumn DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN NXelectronanalyser.nxdl.xml:/COLLECTIONCOLUMN NXcollectioncolumn.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== GROUP (//entry/instrument/electronanalyser/collectioncolumn/contrast_aperture [NXmpes::/NXentry/NXinstrument/NXelectronanalyser/NXcollectioncolumn/NXaperture]): DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture'] DEBUG - classes: @@ -1081,28 +1081,28 @@ NXcollectioncolumn.nxdl.xml:/APERTURE NXaperture.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN/contrast_aperture): -DEBUG - +DEBUG - The size and position of the contrast aperture inserted in the column. To add additional or other apertures use the APERTURE group of NXcollectioncolumn. - + DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/APERTURE): -DEBUG - +DEBUG - The size and position of an aperture inserted in the column, e.g. field aperture or contrast aperture - + DEBUG - documentation (NXaperture.nxdl.xml:): -DEBUG - +DEBUG - A beamline aperture. This group is deprecated, use NXslit instead. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/contrast_aperture@NX_class) -DEBUG - value: NXaperture +DEBUG - value: NXaperture DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN/contrast_aperture NXcollectioncolumn.nxdl.xml:/APERTURE NXaperture.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== GROUP (//entry/instrument/electronanalyser/collectioncolumn/contrast_aperture/ca_m3 [NXmpes::/NXentry/NXinstrument/NXelectronanalyser/NXcollectioncolumn/NXaperture/NXpositioner]): DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NXpositioner'] DEBUG - classes: @@ -1110,23 +1110,23 @@ NXaperture.nxdl.xml:/POSITIONER NXpositioner.nxdl.xml: DEBUG - <> DEBUG - documentation (NXaperture.nxdl.xml:/POSITIONER): -DEBUG - +DEBUG - Stores the raw positions of aperture motors. - + DEBUG - documentation (NXpositioner.nxdl.xml:): -DEBUG - - A generic positioner such as a motor or piezo-electric transducer. - +DEBUG - + A generic positioner such as a motor or piezo-electric transducer. + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/contrast_aperture/ca_m3@NX_class) -DEBUG - value: NXpositioner +DEBUG - value: NXpositioner DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NXpositioner'] DEBUG - classes: NXaperture.nxdl.xml:/POSITIONER NXpositioner.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/contrast_aperture/ca_m3/value): -DEBUG - value: -11.49979350759219 +DEBUG - value: -11.49979350759219 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NXpositioner', 'NX_NUMBER'] DEBUG - classes: NXpositioner.nxdl.xml:/value @@ -1134,13 +1134,13 @@ DEBUG - <> DEBUG - documentation (NXpositioner.nxdl.xml:/value): DEBUG - best known value of positioner - need [n] as may be scanned DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/contrast_aperture/ca_m3/value@units) -DEBUG - value: mm +DEBUG - value: mm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NXpositioner', 'NX_NUMBER'] DEBUG - classes: NXpositioner.nxdl.xml:/value DEBUG - NXpositioner.nxdl.xml:/value@units [NX_ANY] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/contrast_aperture/shape): -DEBUG - value: b'open' +DEBUG - value: b'open' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NX_CHAR'] DEBUG - classes: NXaperture.nxdl.xml:/shape @@ -1157,55 +1157,55 @@ DEBUG - -> bladed DEBUG - -> open DEBUG - -> grid DEBUG - documentation (NXaperture.nxdl.xml:/shape): -DEBUG - +DEBUG - Shape of the aperture. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/contrast_aperture/size): -DEBUG - value: nan +DEBUG - value: nan DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NX_NUMBER'] DEBUG - classes: NXaperture.nxdl.xml:/size DEBUG - <> DEBUG - documentation (NXaperture.nxdl.xml:/size): -DEBUG - +DEBUG - The relevant dimension for the aperture, i.e. slit width, pinhole and iris diameter - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/contrast_aperture/size@units) -DEBUG - value: µm +DEBUG - value: µm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NX_NUMBER'] DEBUG - classes: NXaperture.nxdl.xml:/size DEBUG - NXaperture.nxdl.xml:/size@units [NX_LENGTH] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/extractor_current): -DEBUG - value: -0.1309711275510204 +DEBUG - value: -0.1309711275510204 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NX_FLOAT'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/extractor_current DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/extractor_current): -DEBUG - +DEBUG - Current necessary to keep the extractor lens at a set voltage. Variations indicate leakage, field emission or arc currents to the extractor lens. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/extractor_current@units) -DEBUG - value: µA +DEBUG - value: µA DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NX_FLOAT'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/extractor_current DEBUG - NXcollectioncolumn.nxdl.xml:/extractor_current@units [NX_CURRENT] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/extractor_voltage): -DEBUG - value: 6000.0 +DEBUG - value: 6000.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NX_FLOAT'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/extractor_voltage DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/extractor_voltage): -DEBUG - +DEBUG - Voltage applied to the extractor lens - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/extractor_voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NX_FLOAT'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/extractor_voltage @@ -1218,28 +1218,28 @@ NXcollectioncolumn.nxdl.xml:/APERTURE NXaperture.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN/field_aperture): -DEBUG - +DEBUG - The size and position of the field aperture inserted in the column. To add additional or other apertures use the APERTURE group of NXcollectioncolumn. - + DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/APERTURE): -DEBUG - +DEBUG - The size and position of an aperture inserted in the column, e.g. field aperture or contrast aperture - + DEBUG - documentation (NXaperture.nxdl.xml:): -DEBUG - +DEBUG - A beamline aperture. This group is deprecated, use NXslit instead. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/field_aperture@NX_class) -DEBUG - value: NXaperture +DEBUG - value: NXaperture DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN/field_aperture NXcollectioncolumn.nxdl.xml:/APERTURE NXaperture.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== GROUP (//entry/instrument/electronanalyser/collectioncolumn/field_aperture/fa_m1 [NXmpes::/NXentry/NXinstrument/NXelectronanalyser/NXcollectioncolumn/NXaperture/NXpositioner]): DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NXpositioner'] DEBUG - classes: @@ -1247,23 +1247,23 @@ NXaperture.nxdl.xml:/POSITIONER NXpositioner.nxdl.xml: DEBUG - <> DEBUG - documentation (NXaperture.nxdl.xml:/POSITIONER): -DEBUG - +DEBUG - Stores the raw positions of aperture motors. - + DEBUG - documentation (NXpositioner.nxdl.xml:): -DEBUG - - A generic positioner such as a motor or piezo-electric transducer. - +DEBUG - + A generic positioner such as a motor or piezo-electric transducer. + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/field_aperture/fa_m1@NX_class) -DEBUG - value: NXpositioner +DEBUG - value: NXpositioner DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NXpositioner'] DEBUG - classes: NXaperture.nxdl.xml:/POSITIONER NXpositioner.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/field_aperture/fa_m1/value): -DEBUG - value: 3.749874153422982 +DEBUG - value: 3.749874153422982 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NXpositioner', 'NX_NUMBER'] DEBUG - classes: NXpositioner.nxdl.xml:/value @@ -1271,7 +1271,7 @@ DEBUG - <> DEBUG - documentation (NXpositioner.nxdl.xml:/value): DEBUG - best known value of positioner - need [n] as may be scanned DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/field_aperture/fa_m1/value@units) -DEBUG - value: mm +DEBUG - value: mm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NXpositioner', 'NX_NUMBER'] DEBUG - classes: NXpositioner.nxdl.xml:/value @@ -1283,23 +1283,23 @@ NXaperture.nxdl.xml:/POSITIONER NXpositioner.nxdl.xml: DEBUG - <> DEBUG - documentation (NXaperture.nxdl.xml:/POSITIONER): -DEBUG - +DEBUG - Stores the raw positions of aperture motors. - + DEBUG - documentation (NXpositioner.nxdl.xml:): -DEBUG - - A generic positioner such as a motor or piezo-electric transducer. - +DEBUG - + A generic positioner such as a motor or piezo-electric transducer. + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/field_aperture/fa_m2@NX_class) -DEBUG - value: NXpositioner +DEBUG - value: NXpositioner DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NXpositioner'] DEBUG - classes: NXaperture.nxdl.xml:/POSITIONER NXpositioner.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/field_aperture/fa_m2/value): -DEBUG - value: -5.200156936301793 +DEBUG - value: -5.200156936301793 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NXpositioner', 'NX_NUMBER'] DEBUG - classes: NXpositioner.nxdl.xml:/value @@ -1307,13 +1307,13 @@ DEBUG - <> DEBUG - documentation (NXpositioner.nxdl.xml:/value): DEBUG - best known value of positioner - need [n] as may be scanned DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/field_aperture/fa_m2/value@units) -DEBUG - value: mm +DEBUG - value: mm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NXpositioner', 'NX_NUMBER'] DEBUG - classes: NXpositioner.nxdl.xml:/value DEBUG - NXpositioner.nxdl.xml:/value@units [NX_ANY] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/field_aperture/shape): -DEBUG - value: b'circle' +DEBUG - value: b'circle' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NX_CHAR'] DEBUG - classes: NXaperture.nxdl.xml:/shape @@ -1330,22 +1330,22 @@ DEBUG - -> bladed DEBUG - -> open DEBUG - -> grid DEBUG - documentation (NXaperture.nxdl.xml:/shape): -DEBUG - +DEBUG - Shape of the aperture. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/field_aperture/size): -DEBUG - value: 200.0 +DEBUG - value: 200.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NX_NUMBER'] DEBUG - classes: NXaperture.nxdl.xml:/size DEBUG - <> DEBUG - documentation (NXaperture.nxdl.xml:/size): -DEBUG - +DEBUG - The relevant dimension for the aperture, i.e. slit width, pinhole and iris diameter - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/field_aperture/size@units) -DEBUG - value: µm +DEBUG - value: µm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXaperture', 'NX_NUMBER'] DEBUG - classes: NXaperture.nxdl.xml:/size @@ -1357,52 +1357,52 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_A@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_A/name): -DEBUG - value: b'A' +DEBUG - value: b'A' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_A/voltage): -DEBUG - value: 784.58 +DEBUG - value: 784.58 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_A/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage @@ -1414,52 +1414,52 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_B@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_B/name): -DEBUG - value: b'B' +DEBUG - value: b'B' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_B/voltage): -DEBUG - value: 3253.0 +DEBUG - value: 3253.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_B/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage @@ -1471,52 +1471,52 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_C@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_C/name): -DEBUG - value: b'C' +DEBUG - value: b'C' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_C/voltage): -DEBUG - value: 752.07 +DEBUG - value: 752.07 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_C/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage @@ -1528,52 +1528,52 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_D@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_D/name): -DEBUG - value: b'D' +DEBUG - value: b'D' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_D/voltage): -DEBUG - value: 682.18 +DEBUG - value: 682.18 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_D/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage @@ -1585,52 +1585,52 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_E@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_E/name): -DEBUG - value: b'E' +DEBUG - value: b'E' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_E/voltage): -DEBUG - value: 200.93 +DEBUG - value: 200.93 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_E/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage @@ -1642,52 +1642,52 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_F@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_F/name): -DEBUG - value: b'F' +DEBUG - value: b'F' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_F/voltage): -DEBUG - value: 68.557 +DEBUG - value: 68.557 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_F/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage @@ -1699,52 +1699,52 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_Foc@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_Foc/name): -DEBUG - value: b'Foc' +DEBUG - value: b'Foc' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_Foc/voltage): -DEBUG - value: 158.0 +DEBUG - value: 158.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_Foc/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage @@ -1756,52 +1756,52 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_G@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_G/name): -DEBUG - value: b'G' +DEBUG - value: b'G' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_G/voltage): -DEBUG - value: 30.0 +DEBUG - value: 30.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_G/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage @@ -1813,52 +1813,52 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_H@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_H/name): -DEBUG - value: b'H' +DEBUG - value: b'H' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_H/voltage): -DEBUG - value: 30.0 +DEBUG - value: 30.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_H/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage @@ -1870,52 +1870,52 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_I@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_I/name): -DEBUG - value: b'I' +DEBUG - value: b'I' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_I/voltage): -DEBUG - value: 44.5 +DEBUG - value: 44.5 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_I/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage @@ -1927,52 +1927,52 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_UCA@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_UCA/name): -DEBUG - value: b'UCA' +DEBUG - value: b'UCA' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_UCA/voltage): -DEBUG - value: 1200.0 +DEBUG - value: 1200.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_UCA/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage @@ -1984,71 +1984,71 @@ NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/LENS_EM): -DEBUG - +DEBUG - Individual lenses in the collection column section - + DEBUG - documentation (NXlens_em.nxdl.xml:): -DEBUG - +DEBUG - Description of an electro-magnetic lens or a compound lens. - + For NXtransformations the origin of the coordinate system is placed in the center of the lens (its polepiece, pinhole, or another point of reference). The origin should be specified in the NXtransformations. - + For details of electro-magnetic lenses in the literature see e.g. `L. Reimer `_ - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_UFA@NX_class) -DEBUG - value: NXlens_em +DEBUG - value: NXlens_em DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/LENS_EM NXlens_em.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_UFA/name): -DEBUG - value: b'UFA' +DEBUG - value: b'UFA' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_CHAR'] DEBUG - classes: NXlens_em.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/name): -DEBUG - +DEBUG - Given name, alias, colloquial, or short name for the lens. For manufacturer names and identifiers use respective manufacturer fields. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/lens_UFA/voltage): -DEBUG - value: 600.0 +DEBUG - value: 600.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - <> DEBUG - documentation (NXlens_em.nxdl.xml:/voltage): -DEBUG - +DEBUG - Excitation voltage of the lens. For dipoles it is a single number. For higher orders, it is an array. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/lens_UFA/voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NXlens_em', 'NX_NUMBER'] DEBUG - classes: NXlens_em.nxdl.xml:/voltage DEBUG - NXlens_em.nxdl.xml:/voltage@units [NX_VOLTAGE] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/mode): -DEBUG - value: b'6kV_kmodem2.0_30VTOF_MoTe2_2340VMCP.sav' +DEBUG - value: b'6kV_kmodem2.0_30VTOF_MoTe2_2340VMCP.sav' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN/mode NXcollectioncolumn.nxdl.xml:/mode DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN/mode): -DEBUG - +DEBUG - DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/mode): -DEBUG - +DEBUG - Labelling of the lens setting in use. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/projection): -DEBUG - value: b'reciprocal' +DEBUG - value: b'reciprocal' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN/projection @@ -2058,13 +2058,13 @@ DEBUG - enumeration (NXcollectioncolumn.nxdl.xml:/projection): DEBUG - -> real DEBUG - -> reciprocal DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN/projection): -DEBUG - +DEBUG - DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/projection): -DEBUG - +DEBUG - The space projected in the angularly dispersive directions, real or reciprocal - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/scheme): -DEBUG - value: b'Momentum Microscope' +DEBUG - value: b'Momentum Microscope' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN/scheme @@ -2078,54 +2078,54 @@ DEBUG - -> Deflector DEBUG - -> PEEM DEBUG - -> Momentum Microscope DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/COLLECTIONCOLUMN/scheme): -DEBUG - +DEBUG - Scheme of the electron collection column. - + DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/scheme): -DEBUG - +DEBUG - Scheme of the electron collection lens, i.e. standard, deflector, PEEM, momentum microscope, etc. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/collectioncolumn/working_distance): -DEBUG - value: 4.0 +DEBUG - value: 4.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NX_FLOAT'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/working_distance DEBUG - <> DEBUG - documentation (NXcollectioncolumn.nxdl.xml:/working_distance): -DEBUG - +DEBUG - Distance between sample and detector entrance - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/collectioncolumn/working_distance@units) -DEBUG - value: mm +DEBUG - value: mm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXcollectioncolumn', 'NX_FLOAT'] DEBUG - classes: NXcollectioncolumn.nxdl.xml:/working_distance DEBUG - NXcollectioncolumn.nxdl.xml:/working_distance@units [NX_LENGTH] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/depends_on): -DEBUG - value: b'/entry/instrument/electronanalyser/transformations/trans_z' +DEBUG - value: b'/entry/instrument/electronanalyser/transformations/trans_z' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NX_CHAR'] DEBUG - classes: NXelectronanalyser.nxdl.xml:/depends_on DEBUG - <> DEBUG - documentation (NXelectronanalyser.nxdl.xml:/depends_on): -DEBUG - +DEBUG - Refers to the last transformation specifying the positon of the manipulator in the NXtransformations chain. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/description): -DEBUG - value: b'SPECS Metis 1000 Momentum Microscope' +DEBUG - value: b'SPECS Metis 1000 Momentum Microscope' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/description NXelectronanalyser.nxdl.xml:/description DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/description): -DEBUG - +DEBUG - DEBUG - documentation (NXelectronanalyser.nxdl.xml:/description): -DEBUG - +DEBUG - Free text description of the type of the detector - + DEBUG - ===== GROUP (//entry/instrument/electronanalyser/detector [NXmpes::/NXentry/NXinstrument/NXelectronanalyser/NXdetector]): DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXdetector'] DEBUG - classes: @@ -2134,42 +2134,42 @@ NXelectronanalyser.nxdl.xml:/DETECTOR NXdetector.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/DETECTOR): -DEBUG - +DEBUG - DEBUG - documentation (NXelectronanalyser.nxdl.xml:/DETECTOR): -DEBUG - +DEBUG - Describes the electron detector - + DEBUG - documentation (NXdetector.nxdl.xml:): -DEBUG - +DEBUG - A detector, detector bank, or multidetector. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/detector@NX_class) -DEBUG - value: NXdetector +DEBUG - value: NXdetector DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXdetector'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/DETECTOR NXelectronanalyser.nxdl.xml:/DETECTOR NXdetector.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/detector/amplifier_bias): -DEBUG - value: 30.0 +DEBUG - value: 30.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXdetector', 'NX_FLOAT'] DEBUG - classes: NXdetector.nxdl.xml:/amplifier_bias DEBUG - <> DEBUG - documentation (NXdetector.nxdl.xml:/amplifier_bias): -DEBUG - +DEBUG - The low voltage of the amplifier migh not be the ground. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/detector/amplifier_bias@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXdetector', 'NX_FLOAT'] DEBUG - classes: NXdetector.nxdl.xml:/amplifier_bias DEBUG - NXdetector.nxdl.xml:/amplifier_bias@units [NX_VOLTAGE] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/detector/amplifier_type): -DEBUG - value: b'MCP' +DEBUG - value: b'MCP' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXdetector', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/DETECTOR/amplifier_type @@ -2179,31 +2179,31 @@ DEBUG - enumeration (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/DETECTOR DEBUG - -> MCP DEBUG - -> channeltron DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/DETECTOR/amplifier_type): -DEBUG - +DEBUG - Type of electron amplifier in the first amplification step. - + DEBUG - documentation (NXdetector.nxdl.xml:/amplifier_type): -DEBUG - +DEBUG - Type of electron amplifier, MCP, channeltron, etc. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/detector/amplifier_voltage): -DEBUG - value: 2340.0 +DEBUG - value: 2340.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXdetector', 'NX_FLOAT'] DEBUG - classes: NXdetector.nxdl.xml:/amplifier_voltage DEBUG - <> DEBUG - documentation (NXdetector.nxdl.xml:/amplifier_voltage): -DEBUG - +DEBUG - Voltage applied to the amplifier. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/detector/amplifier_voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXdetector', 'NX_FLOAT'] DEBUG - classes: NXdetector.nxdl.xml:/amplifier_voltage DEBUG - NXdetector.nxdl.xml:/amplifier_voltage@units [NX_VOLTAGE] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/detector/detector_type): -DEBUG - value: b'DLD' +DEBUG - value: b'DLD' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXdetector', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/DETECTOR/detector_type @@ -2217,57 +2217,57 @@ DEBUG - -> ECMOS DEBUG - -> Anode DEBUG - -> Multi-anode DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/DETECTOR/detector_type): -DEBUG - +DEBUG - Description of the detector type. - + DEBUG - documentation (NXdetector.nxdl.xml:/detector_type): -DEBUG - +DEBUG - Description of the detector type, DLD, Phosphor+CCD, CMOS. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/detector/detector_voltage): -DEBUG - value: 399.99712810186986 +DEBUG - value: 399.99712810186986 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXdetector', 'NX_FLOAT'] DEBUG - classes: NXdetector.nxdl.xml:/detector_voltage DEBUG - <> DEBUG - documentation (NXdetector.nxdl.xml:/detector_voltage): -DEBUG - +DEBUG - Voltage applied to detector. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/detector/detector_voltage@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXdetector', 'NX_FLOAT'] DEBUG - classes: NXdetector.nxdl.xml:/detector_voltage DEBUG - NXdetector.nxdl.xml:/detector_voltage@units [NX_VOLTAGE] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/detector/sensor_pixels): -DEBUG - value: [1800 1800] +DEBUG - value: [1800 1800] DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXdetector', 'NX_INT'] DEBUG - classes: NXdetector.nxdl.xml:/sensor_pixels DEBUG - <> DEBUG - documentation (NXdetector.nxdl.xml:/sensor_pixels): -DEBUG - +DEBUG - Number of raw active elements in each dimension. Important for swept scans. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/energy_resolution): -DEBUG - value: 110.0 +DEBUG - value: 110.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/energy_resolution NXelectronanalyser.nxdl.xml:/energy_resolution DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/energy_resolution): -DEBUG - +DEBUG - Energy resolution of the analyser with the current setting. May be linked from a NXcalibration. - + DEBUG - documentation (NXelectronanalyser.nxdl.xml:/energy_resolution): -DEBUG - +DEBUG - Energy resolution of the electron analyser (FWHM of gaussian broadening) - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/energy_resolution@units) -DEBUG - value: meV +DEBUG - value: meV DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/energy_resolution @@ -2282,27 +2282,27 @@ NXelectronanalyser.nxdl.xml:/ENERGYDISPERSION NXenergydispersion.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/ENERGYDISPERSION): -DEBUG - +DEBUG - DEBUG - documentation (NXelectronanalyser.nxdl.xml:/ENERGYDISPERSION): -DEBUG - +DEBUG - Describes the energy dispersion section - + DEBUG - documentation (NXenergydispersion.nxdl.xml:): -DEBUG - +DEBUG - Subclass of NXelectronanalyser to describe the energy dispersion section of a photoelectron analyser. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/energydispersion@NX_class) -DEBUG - value: NXenergydispersion +DEBUG - value: NXenergydispersion DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXenergydispersion'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/ENERGYDISPERSION NXelectronanalyser.nxdl.xml:/ENERGYDISPERSION NXenergydispersion.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/energydispersion/energy_scan_mode): -DEBUG - value: b'fixed' +DEBUG - value: b'fixed' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXenergydispersion', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/ENERGYDISPERSION/energy_scan_mode @@ -2312,27 +2312,27 @@ DEBUG - enumeration (NXenergydispersion.nxdl.xml:/energy_scan_mode): DEBUG - -> fixed DEBUG - -> sweep DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/ENERGYDISPERSION/energy_scan_mode): -DEBUG - +DEBUG - DEBUG - documentation (NXenergydispersion.nxdl.xml:/energy_scan_mode): -DEBUG - +DEBUG - Way of scanning the energy axis (fixed or sweep). - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/energydispersion/pass_energy): -DEBUG - value: 30.0 +DEBUG - value: 30.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXenergydispersion', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/ENERGYDISPERSION/pass_energy NXenergydispersion.nxdl.xml:/pass_energy DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/ENERGYDISPERSION/pass_energy): -DEBUG - +DEBUG - DEBUG - documentation (NXenergydispersion.nxdl.xml:/pass_energy): -DEBUG - +DEBUG - Energy of the electrons on the mean path of the analyser. Pass energy for hemispherics, drift energy for tofs. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/energydispersion/pass_energy@units) -DEBUG - value: eV +DEBUG - value: eV DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXenergydispersion', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/ENERGYDISPERSION/pass_energy @@ -2340,7 +2340,7 @@ NXenergydispersion.nxdl.xml:/pass_energy DEBUG - NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/ENERGYDISPERSION/pass_energy@units [NX_ENERGY] DEBUG - NXenergydispersion.nxdl.xml:/pass_energy@units [NX_ENERGY] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/energydispersion/scheme): -DEBUG - value: b'tof' +DEBUG - value: b'tof' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXenergydispersion', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/ENERGYDISPERSION/scheme @@ -2354,96 +2354,96 @@ DEBUG - -> cylindrical mirror DEBUG - -> display mirror DEBUG - -> retarding grid DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/ENERGYDISPERSION/scheme): -DEBUG - +DEBUG - DEBUG - documentation (NXenergydispersion.nxdl.xml:/scheme): -DEBUG - +DEBUG - Energy dispersion scheme employed, for example: tof, hemispherical, cylindrical, mirror, retarding grid, etc. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/energydispersion/tof_distance): -DEBUG - value: 0.9 +DEBUG - value: 0.9 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXenergydispersion', 'NX_FLOAT'] DEBUG - classes: NXenergydispersion.nxdl.xml:/tof_distance DEBUG - <> DEBUG - documentation (NXenergydispersion.nxdl.xml:/tof_distance): -DEBUG - +DEBUG - Length of the tof drift electrode - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/energydispersion/tof_distance@units) -DEBUG - value: m +DEBUG - value: m DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXenergydispersion', 'NX_FLOAT'] DEBUG - classes: NXenergydispersion.nxdl.xml:/tof_distance DEBUG - NXenergydispersion.nxdl.xml:/tof_distance@units [NX_LENGTH] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/fast_axes): -DEBUG - value: [b'kx' b'ky' b'E'] +DEBUG - value: [b'kx' b'ky' b'E'] DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/fast_axes NXelectronanalyser.nxdl.xml:/fast_axes DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/fast_axes): -DEBUG - +DEBUG - DEBUG - documentation (NXelectronanalyser.nxdl.xml:/fast_axes): -DEBUG - +DEBUG - List of the axes that are acquired simultaneously by the detector. These refer only to the experimental variables recorded by the electron analyser. Other variables such as temperature, manipulator angles etc. are labeled as fast or slow in the data. - + .. csv-table:: Examples :header: "Mode", "fast_axes", "slow_axes" - + Hemispherical in ARPES mode, "['energy', 'kx']","" "Hemispherical with channeltron, sweeping energy mode", "", [\"energy\"] "Tof", "['energy', 'kx', 'ky']","" "Momentum microscope, spin-resolved", "['energy', 'kx', 'ky']", "['spin up-down', 'spin left-right']" - + Axes may be less abstract than this, i.e. ['detector_x', 'detector_y']. If energy_scan_mode=sweep, fast_axes: ['energy', 'kx']; slow_axes: ['energy'] is allowed. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/momentum_resolution): -DEBUG - value: 0.08 +DEBUG - value: 0.08 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NX_FLOAT'] DEBUG - classes: NXelectronanalyser.nxdl.xml:/momentum_resolution DEBUG - <> DEBUG - documentation (NXelectronanalyser.nxdl.xml:/momentum_resolution): -DEBUG - +DEBUG - Momentum resolution of the electron analyser (FWHM) - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/momentum_resolution@units) -DEBUG - value: 1/angstrom +DEBUG - value: 1/angstrom DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NX_FLOAT'] DEBUG - classes: NXelectronanalyser.nxdl.xml:/momentum_resolution DEBUG - NXelectronanalyser.nxdl.xml:/momentum_resolution@units [NX_WAVENUMBER] DEBUG - ===== FIELD (//entry/instrument/electronanalyser/slow_axes): -DEBUG - value: b'delay' +DEBUG - value: b'delay' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/slow_axes NXelectronanalyser.nxdl.xml:/slow_axes DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/ELECTRONANALYSER/slow_axes): -DEBUG - +DEBUG - DEBUG - documentation (NXelectronanalyser.nxdl.xml:/slow_axes): -DEBUG - +DEBUG - List of the axes that are acquired by scanning a physical parameter, listed in order of decreasing speed. See fast_axes for examples. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/spatial_resolution): -DEBUG - value: 10.0 +DEBUG - value: 10.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NX_FLOAT'] DEBUG - classes: NXelectronanalyser.nxdl.xml:/spatial_resolution DEBUG - <> DEBUG - documentation (NXelectronanalyser.nxdl.xml:/spatial_resolution): -DEBUG - +DEBUG - Spatial resolution of the electron analyser (Airy disk radius) - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/spatial_resolution@units) -DEBUG - value: µm +DEBUG - value: µm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NX_FLOAT'] DEBUG - classes: NXelectronanalyser.nxdl.xml:/spatial_resolution @@ -2455,7 +2455,7 @@ NXelectronanalyser.nxdl.xml:/TRANSFORMATIONS NXtransformations.nxdl.xml: DEBUG - <> DEBUG - documentation (NXelectronanalyser.nxdl.xml:/TRANSFORMATIONS): -DEBUG - +DEBUG - Collection of axis-based translations and rotations to describe the location and geometry of the electron analyser as a component in the instrument. Conventions from the NXtransformations base class are used. In principle, the McStas @@ -2464,9 +2464,9 @@ DEBUG - relate it relative to the experimental setup. Typically, the components of a system should all be related relative to each other and only one component should relate to the reference coordinate system. - + DEBUG - documentation (NXtransformations.nxdl.xml:): -DEBUG - +DEBUG - Collection of axis-based translations and rotations to describe a geometry. May also contain axes that do not move and therefore do not have a transformation type specified, but are useful in understanding coordinate frames within which @@ -2519,10 +2519,10 @@ DEBUG - about an axis in the direction of ``vector``, of angle of the field value. NOTE - + One possible use of ``NXtransformations`` is to define the motors and transformations for a diffractometer (goniometer). Such use is mentioned - in the ``NXinstrument`` base class. Use one ``NXtransformations`` group + in the ``NXinstrument`` base class. Use one ``NXtransformations`` group for each diffractometer and name the group appropriate to the device. Collecting the motors of a sample table or xyz-stage in an NXtransformations group is equally possible. @@ -2541,23 +2541,23 @@ DEBUG - * depends_on as needed. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/transformations@NX_class) -DEBUG - value: NXtransformations +DEBUG - value: NXtransformations DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXtransformations'] DEBUG - classes: NXelectronanalyser.nxdl.xml:/TRANSFORMATIONS NXtransformations.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/electronanalyser/transformations/rot_y): -DEBUG - value: -115.0 +DEBUG - value: -115.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -2567,21 +2567,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/transformations/rot_y@depends_on) -DEBUG - value: . +DEBUG - value: . DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/transformations/rot_y@transformation_type) -DEBUG - value: rotation +DEBUG - value: rotation DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -2591,7 +2591,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -2600,22 +2600,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/transformations/rot_y@units) -DEBUG - value: degrees +DEBUG - value: degrees DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/transformations/rot_y@vector) -DEBUG - value: [0 1 0] +DEBUG - value: [0 1 0] DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -2623,15 +2623,15 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/instrument/electronanalyser/transformations/trans_z): -DEBUG - value: 4.0 +DEBUG - value: 4.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -2641,21 +2641,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/transformations/trans_z@depends_on) -DEBUG - value: rot_y +DEBUG - value: rot_y DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/transformations/trans_z@transformation_type) -DEBUG - value: translation +DEBUG - value: translation DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -2665,7 +2665,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -2674,22 +2674,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/transformations/trans_z@units) -DEBUG - value: mm +DEBUG - value: mm DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/instrument/electronanalyser/transformations/trans_z@vector) -DEBUG - value: [0 0 1] +DEBUG - value: [0 0 1] DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXelectronanalyser', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -2697,22 +2697,22 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/instrument/energy_resolution): -DEBUG - value: 140.0 +DEBUG - value: 140.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/energy_resolution NXinstrument.nxdl.xml:/energy_resolution DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/energy_resolution): -DEBUG - +DEBUG - DEBUG - documentation (NXinstrument.nxdl.xml:/energy_resolution): -DEBUG - +DEBUG - Energy resolution of the experiment (FWHM or gaussian broadening) - + DEBUG - ===== ATTRS (//entry/instrument/energy_resolution@units) -DEBUG - value: meV +DEBUG - value: meV DEBUG - classpath: ['NXentry', 'NXinstrument', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/energy_resolution @@ -2726,49 +2726,49 @@ NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/MANIPULATOR NXmanipulator.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/MANIPULATOR): -DEBUG - +DEBUG - Manipulator for positioning of the sample. - + DEBUG - documentation (NXmanipulator.nxdl.xml:): -DEBUG - +DEBUG - Extension of NXpositioner to include fields to describe the use of manipulators in photoemission experiments. - + DEBUG - ===== ATTRS (//entry/instrument/manipulator@NX_class) -DEBUG - value: NXmanipulator +DEBUG - value: NXmanipulator DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/MANIPULATOR NXmanipulator.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/manipulator/depends_on): -DEBUG - value: b'/entry/instrument/manipulator/transformations/trans_z' +DEBUG - value: b'/entry/instrument/manipulator/transformations/trans_z' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NX_CHAR'] DEBUG - classes: NXmanipulator.nxdl.xml:/depends_on DEBUG - <> DEBUG - documentation (NXmanipulator.nxdl.xml:/depends_on): -DEBUG - +DEBUG - Refers to the last transformation specifying the positon of the manipulator in the NXtransformations chain. - + DEBUG - ===== FIELD (//entry/instrument/manipulator/sample_bias): -DEBUG - value: 17.799719004221362 +DEBUG - value: 17.799719004221362 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/MANIPULATOR/sample_bias NXmanipulator.nxdl.xml:/sample_bias DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/MANIPULATOR/sample_bias): -DEBUG - +DEBUG - DEBUG - documentation (NXmanipulator.nxdl.xml:/sample_bias): -DEBUG - +DEBUG - Possible bias of the sample with trespect to analyser ground. This field may also be found in NXsample if present. - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/sample_bias@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/MANIPULATOR/sample_bias @@ -2776,21 +2776,21 @@ NXmanipulator.nxdl.xml:/sample_bias DEBUG - NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/MANIPULATOR/sample_bias@units [NX_CURRENT] DEBUG - NXmanipulator.nxdl.xml:/sample_bias@units [NX_CURRENT] DEBUG - ===== FIELD (//entry/instrument/manipulator/sample_temperature): -DEBUG - value: 23.050763803680983 +DEBUG - value: 23.050763803680983 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/MANIPULATOR/sample_temperature NXmanipulator.nxdl.xml:/sample_temperature DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/MANIPULATOR/sample_temperature): -DEBUG - +DEBUG - DEBUG - documentation (NXmanipulator.nxdl.xml:/sample_temperature): -DEBUG - +DEBUG - Temperature at the closest point to the sample. This field may also be found in NXsample if present. - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/sample_temperature@units) -DEBUG - value: K +DEBUG - value: K DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/MANIPULATOR/sample_temperature @@ -2804,7 +2804,7 @@ NXmanipulator.nxdl.xml:/TRANSFORMATIONS NXtransformations.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmanipulator.nxdl.xml:/TRANSFORMATIONS): -DEBUG - +DEBUG - Collection of axis-based translations and rotations to describe the location and geometry of the manipulator as a component in the instrument. Conventions from the NXtransformations base class are used. In principle, the McStas coordinate @@ -2813,9 +2813,9 @@ DEBUG - relative to the experimental setup. Typically, the components of a system should all be related relative to each other and only one component should relate to the reference coordinate system. - + DEBUG - documentation (NXtransformations.nxdl.xml:): -DEBUG - +DEBUG - Collection of axis-based translations and rotations to describe a geometry. May also contain axes that do not move and therefore do not have a transformation type specified, but are useful in understanding coordinate frames within which @@ -2868,10 +2868,10 @@ DEBUG - about an axis in the direction of ``vector``, of angle of the field value. NOTE - + One possible use of ``NXtransformations`` is to define the motors and transformations for a diffractometer (goniometer). Such use is mentioned - in the ``NXinstrument`` base class. Use one ``NXtransformations`` group + in the ``NXinstrument`` base class. Use one ``NXtransformations`` group for each diffractometer and name the group appropriate to the device. Collecting the motors of a sample table or xyz-stage in an NXtransformations group is equally possible. @@ -2890,23 +2890,23 @@ DEBUG - * depends_on as needed. - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations@NX_class) -DEBUG - value: NXtransformations +DEBUG - value: NXtransformations DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations'] DEBUG - classes: NXmanipulator.nxdl.xml:/TRANSFORMATIONS NXtransformations.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/manipulator/transformations/rot_x): -DEBUG - value: -90.0 +DEBUG - value: -90.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -2916,21 +2916,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/rot_x@depends_on) -DEBUG - value: . +DEBUG - value: . DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/rot_x@transformation_type) -DEBUG - value: rotation +DEBUG - value: rotation DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -2940,7 +2940,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -2949,22 +2949,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/rot_x@units) -DEBUG - value: degrees +DEBUG - value: degrees DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/rot_x@vector) -DEBUG - value: [1 0 0] +DEBUG - value: [1 0 0] DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -2972,15 +2972,15 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/instrument/manipulator/transformations/rot_z): -DEBUG - value: -25.0 +DEBUG - value: -25.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -2990,21 +2990,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/rot_z@depends_on) -DEBUG - value: rot_x +DEBUG - value: rot_x DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/rot_z@transformation_type) -DEBUG - value: rotation +DEBUG - value: rotation DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -3014,7 +3014,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -3023,22 +3023,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/rot_z@units) -DEBUG - value: degrees +DEBUG - value: degrees DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/rot_z@vector) -DEBUG - value: [0 0 1] +DEBUG - value: [0 0 1] DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -3046,15 +3046,15 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/instrument/manipulator/transformations/trans_z): -DEBUG - value: -0.32 +DEBUG - value: -0.32 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -3064,21 +3064,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/trans_z@depends_on) -DEBUG - value: rot_z +DEBUG - value: rot_z DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/trans_z@transformation_type) -DEBUG - value: translation +DEBUG - value: translation DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -3088,7 +3088,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -3097,22 +3097,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/trans_z@units) -DEBUG - value: m +DEBUG - value: m DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/instrument/manipulator/transformations/trans_z@vector) -DEBUG - value: [0 0 1] +DEBUG - value: [0 0 1] DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXmanipulator', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -3120,44 +3120,44 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/instrument/momentum_resolution): -DEBUG - value: 0.08 +DEBUG - value: 0.08 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NX_FLOAT'] DEBUG - classes: NXinstrument.nxdl.xml:/momentum_resolution DEBUG - <> DEBUG - documentation (NXinstrument.nxdl.xml:/momentum_resolution): -DEBUG - +DEBUG - Momentum resolution of the experiment (FWHM) - + DEBUG - ===== ATTRS (//entry/instrument/momentum_resolution@units) -DEBUG - value: 1/angstrom +DEBUG - value: 1/angstrom DEBUG - classpath: ['NXentry', 'NXinstrument', 'NX_FLOAT'] DEBUG - classes: NXinstrument.nxdl.xml:/momentum_resolution DEBUG - NXinstrument.nxdl.xml:/momentum_resolution@units [NX_WAVENUMBER] DEBUG - ===== FIELD (//entry/instrument/name): -DEBUG - value: b'Time-of-flight momentum microscope equipped delay line detector, at the endstation of the high rep-rate HHG source at FHI' +DEBUG - value: b'Time-of-flight momentum microscope equipped delay line detector, at the endstation of the high rep-rate HHG source at FHI' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NX_CHAR'] DEBUG - classes: NXinstrument.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXinstrument.nxdl.xml:/name): -DEBUG - +DEBUG - Name of instrument - + DEBUG - ===== ATTRS (//entry/instrument/name@short_name) -DEBUG - value: TR-ARPES @ FHI +DEBUG - value: TR-ARPES @ FHI DEBUG - classpath: ['NXentry', 'NXinstrument', 'NX_CHAR'] DEBUG - classes: NXinstrument.nxdl.xml:/name DEBUG - NXinstrument.nxdl.xml:/name@short_name - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXinstrument.nxdl.xml:/name/short_name): -DEBUG - +DEBUG - short name for instrument, perhaps the acronym - + DEBUG - ===== GROUP (//entry/instrument/source [NXmpes::/NXentry/NXinstrument/NXsource]): DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource'] DEBUG - classes: @@ -3166,45 +3166,45 @@ NXinstrument.nxdl.xml:/SOURCE NXsource.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE): -DEBUG - +DEBUG - The source used to generate the primary photons. Properties refer strictly to parameters of the source, not of the output beam. For example, the energy of the source is not the optical power of the beam, but the energy of the electron beam in a synchrotron and so on. - + DEBUG - documentation (NXinstrument.nxdl.xml:/SOURCE): -DEBUG - +DEBUG - DEBUG - documentation (NXsource.nxdl.xml:): -DEBUG - +DEBUG - The neutron or x-ray storage ring/facility. - + DEBUG - ===== ATTRS (//entry/instrument/source@NX_class) -DEBUG - value: NXsource +DEBUG - value: NXsource DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE NXinstrument.nxdl.xml:/SOURCE NXsource.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/source/frequency): -DEBUG - value: 500.0 +DEBUG - value: 500.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_FLOAT'] DEBUG - classes: NXsource.nxdl.xml:/frequency DEBUG - <> DEBUG - documentation (NXsource.nxdl.xml:/frequency): -DEBUG - +DEBUG - Frequency of pulsed source - + DEBUG - ===== ATTRS (//entry/instrument/source/frequency@units) -DEBUG - value: kHz +DEBUG - value: kHz DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_FLOAT'] DEBUG - classes: NXsource.nxdl.xml:/frequency DEBUG - NXsource.nxdl.xml:/frequency@units [NX_FREQUENCY] DEBUG - ===== FIELD (//entry/instrument/source/mode): -DEBUG - value: b'Single Bunch' +DEBUG - value: b'Single Bunch' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_CHAR'] DEBUG - classes: NXsource.nxdl.xml:/mode @@ -3213,41 +3213,41 @@ DEBUG - enumeration (NXsource.nxdl.xml:/mode): DEBUG - -> Single Bunch DEBUG - -> Multi Bunch DEBUG - documentation (NXsource.nxdl.xml:/mode): -DEBUG - +DEBUG - source operating mode - + DEBUG - ===== FIELD (//entry/instrument/source/name): -DEBUG - value: b'HHG @ TR-ARPES @ FHI' +DEBUG - value: b'HHG @ TR-ARPES @ FHI' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/name NXsource.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/name): -DEBUG - +DEBUG - DEBUG - documentation (NXsource.nxdl.xml:/name): -DEBUG - +DEBUG - Name of source - + DEBUG - ===== FIELD (//entry/instrument/source/photon_energy): -DEBUG - value: 21.7 +DEBUG - value: 21.7 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_FLOAT'] DEBUG - classes: NXsource.nxdl.xml:/photon_energy DEBUG - <> DEBUG - documentation (NXsource.nxdl.xml:/photon_energy): -DEBUG - +DEBUG - The center photon energy of the source, before it is monochromatized or converted - + DEBUG - ===== ATTRS (//entry/instrument/source/photon_energy@units) -DEBUG - value: eV +DEBUG - value: eV DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_FLOAT'] DEBUG - classes: NXsource.nxdl.xml:/photon_energy DEBUG - NXsource.nxdl.xml:/photon_energy@units [NX_ENERGY] DEBUG - ===== FIELD (//entry/instrument/source/probe): -DEBUG - value: b'ultraviolet' +DEBUG - value: b'ultraviolet' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/probe @@ -3267,16 +3267,16 @@ DEBUG - -> visible light DEBUG - -> positron DEBUG - -> proton DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/probe): -DEBUG - +DEBUG - Type of probe. In photoemission it's always photons, so the full NIAC list is restricted. - + DEBUG - documentation (NXsource.nxdl.xml:/probe): -DEBUG - +DEBUG - type of radiation probe (pick one from the enumerated list and spell exactly) - + DEBUG - ===== FIELD (//entry/instrument/source/type): -DEBUG - value: b'HHG laser' +DEBUG - value: b'HHG laser' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/type @@ -3307,11 +3307,11 @@ DEBUG - -> Ion Source DEBUG - -> UV Plasma Source DEBUG - -> Metal Jet X-ray DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/type): -DEBUG - +DEBUG - DEBUG - documentation (NXsource.nxdl.xml:/type): -DEBUG - +DEBUG - type of radiation source (pick one from the enumerated list and spell exactly) - + DEBUG - ===== GROUP (//entry/instrument/source_pump [NXmpes::/NXentry/NXinstrument/NXsource]): DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource'] DEBUG - classes: @@ -3320,45 +3320,45 @@ NXinstrument.nxdl.xml:/SOURCE NXsource.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE): -DEBUG - +DEBUG - The source used to generate the primary photons. Properties refer strictly to parameters of the source, not of the output beam. For example, the energy of the source is not the optical power of the beam, but the energy of the electron beam in a synchrotron and so on. - + DEBUG - documentation (NXinstrument.nxdl.xml:/SOURCE): -DEBUG - +DEBUG - DEBUG - documentation (NXsource.nxdl.xml:): -DEBUG - +DEBUG - The neutron or x-ray storage ring/facility. - + DEBUG - ===== ATTRS (//entry/instrument/source_pump@NX_class) -DEBUG - value: NXsource +DEBUG - value: NXsource DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE NXinstrument.nxdl.xml:/SOURCE NXsource.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/instrument/source_pump/frequency): -DEBUG - value: 500.0 +DEBUG - value: 500.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_FLOAT'] DEBUG - classes: NXsource.nxdl.xml:/frequency DEBUG - <> DEBUG - documentation (NXsource.nxdl.xml:/frequency): -DEBUG - +DEBUG - Frequency of pulsed source - + DEBUG - ===== ATTRS (//entry/instrument/source_pump/frequency@units) -DEBUG - value: kHz +DEBUG - value: kHz DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_FLOAT'] DEBUG - classes: NXsource.nxdl.xml:/frequency DEBUG - NXsource.nxdl.xml:/frequency@units [NX_FREQUENCY] DEBUG - ===== FIELD (//entry/instrument/source_pump/mode): -DEBUG - value: b'Single Bunch' +DEBUG - value: b'Single Bunch' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_CHAR'] DEBUG - classes: NXsource.nxdl.xml:/mode @@ -3367,41 +3367,41 @@ DEBUG - enumeration (NXsource.nxdl.xml:/mode): DEBUG - -> Single Bunch DEBUG - -> Multi Bunch DEBUG - documentation (NXsource.nxdl.xml:/mode): -DEBUG - +DEBUG - source operating mode - + DEBUG - ===== FIELD (//entry/instrument/source_pump/name): -DEBUG - value: b'OPCPA @ TR-ARPES @ FHI' +DEBUG - value: b'OPCPA @ TR-ARPES @ FHI' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/name NXsource.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/name): -DEBUG - +DEBUG - DEBUG - documentation (NXsource.nxdl.xml:/name): -DEBUG - +DEBUG - Name of source - + DEBUG - ===== FIELD (//entry/instrument/source_pump/photon_energy): -DEBUG - value: 1.2 +DEBUG - value: 1.2 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_FLOAT'] DEBUG - classes: NXsource.nxdl.xml:/photon_energy DEBUG - <> DEBUG - documentation (NXsource.nxdl.xml:/photon_energy): -DEBUG - +DEBUG - The center photon energy of the source, before it is monochromatized or converted - + DEBUG - ===== ATTRS (//entry/instrument/source_pump/photon_energy@units) -DEBUG - value: eV +DEBUG - value: eV DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_FLOAT'] DEBUG - classes: NXsource.nxdl.xml:/photon_energy DEBUG - NXsource.nxdl.xml:/photon_energy@units [NX_ENERGY] DEBUG - ===== FIELD (//entry/instrument/source_pump/probe): -DEBUG - value: b'visible light' +DEBUG - value: b'visible light' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/probe @@ -3421,16 +3421,16 @@ DEBUG - -> visible light DEBUG - -> positron DEBUG - -> proton DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/probe): -DEBUG - +DEBUG - Type of probe. In photoemission it's always photons, so the full NIAC list is restricted. - + DEBUG - documentation (NXsource.nxdl.xml:/probe): -DEBUG - +DEBUG - type of radiation probe (pick one from the enumerated list and spell exactly) - + DEBUG - ===== FIELD (//entry/instrument/source_pump/type): -DEBUG - value: b'Optical Laser' +DEBUG - value: b'Optical Laser' DEBUG - classpath: ['NXentry', 'NXinstrument', 'NXsource', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/type @@ -3461,23 +3461,23 @@ DEBUG - -> Ion Source DEBUG - -> UV Plasma Source DEBUG - -> Metal Jet X-ray DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/INSTRUMENT/SOURCE/type): -DEBUG - +DEBUG - DEBUG - documentation (NXsource.nxdl.xml:/type): -DEBUG - +DEBUG - type of radiation source (pick one from the enumerated list and spell exactly) - + DEBUG - ===== FIELD (//entry/instrument/temporal_resolution): -DEBUG - value: 35.0 +DEBUG - value: 35.0 DEBUG - classpath: ['NXentry', 'NXinstrument', 'NX_FLOAT'] DEBUG - classes: NXinstrument.nxdl.xml:/temporal_resolution DEBUG - <> DEBUG - documentation (NXinstrument.nxdl.xml:/temporal_resolution): -DEBUG - +DEBUG - Temporal resolution of the experiment (FWHM) - + DEBUG - ===== ATTRS (//entry/instrument/temporal_resolution@units) -DEBUG - value: fs +DEBUG - value: fs DEBUG - classpath: ['NXentry', 'NXinstrument', 'NX_FLOAT'] DEBUG - classes: NXinstrument.nxdl.xml:/temporal_resolution @@ -3490,26 +3490,26 @@ NXentry.nxdl.xml:/PROCESS NXprocess.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/PROCESS): -DEBUG - +DEBUG - Document an event of data processing, reconstruction, or analysis for this data. Describe the appropriate axis calibrations for your experiment using one or more of the following NXcalibrations - + DEBUG - documentation (NXentry.nxdl.xml:/PROCESS): -DEBUG - +DEBUG - DEBUG - documentation (NXprocess.nxdl.xml:): -DEBUG - +DEBUG - Document an event of data processing, reconstruction, or analysis for this data. - + DEBUG - ===== ATTRS (//entry/process@NX_class) -DEBUG - value: NXprocess +DEBUG - value: NXprocess DEBUG - classpath: ['NXentry', 'NXprocess'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/PROCESS NXentry.nxdl.xml:/PROCESS NXprocess.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== GROUP (//entry/process/distortion [NXmpes::/NXentry/NXprocess/NXdistortion]): DEBUG - classpath: ['NXentry', 'NXprocess', 'NXdistortion'] DEBUG - classes: @@ -3517,31 +3517,31 @@ NXprocess.nxdl.xml:/DISTORTION NXdistortion.nxdl.xml: DEBUG - <> DEBUG - documentation (NXprocess.nxdl.xml:/DISTORTION): -DEBUG - +DEBUG - Describes the operations of image distortion correction - + DEBUG - documentation (NXdistortion.nxdl.xml:): -DEBUG - +DEBUG - Subclass of NXprocess to describe post-processing distortion correction. - + DEBUG - ===== ATTRS (//entry/process/distortion@NX_class) -DEBUG - value: NXdistortion +DEBUG - value: NXdistortion DEBUG - classpath: ['NXentry', 'NXprocess', 'NXdistortion'] DEBUG - classes: NXprocess.nxdl.xml:/DISTORTION NXdistortion.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/process/distortion/applied): -DEBUG - value: True +DEBUG - value: True DEBUG - classpath: ['NXentry', 'NXprocess', 'NXdistortion', 'NX_BOOLEAN'] DEBUG - classes: NXdistortion.nxdl.xml:/applied DEBUG - <> DEBUG - documentation (NXdistortion.nxdl.xml:/applied): -DEBUG - +DEBUG - Has the distortion correction been applied? - + DEBUG - ===== FIELD (//entry/process/distortion/cdeform_field): DEBUG - value: [0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. ... DEBUG - classpath: ['NXentry', 'NXprocess', 'NXdistortion', 'NX_FLOAT'] @@ -3549,32 +3549,32 @@ DEBUG - classes: NXdistortion.nxdl.xml:/cdeform_field DEBUG - <> DEBUG - documentation (NXdistortion.nxdl.xml:/cdeform_field): -DEBUG - +DEBUG - Column deformation field for general non-rigid distortion corrections. 2D matrix holding the column information of the mapping of each original coordinate. - + DEBUG - ===== FIELD (//entry/process/distortion/original_centre): -DEBUG - value: [203. 215.] +DEBUG - value: [203. 215.] DEBUG - classpath: ['NXentry', 'NXprocess', 'NXdistortion', 'NX_FLOAT'] DEBUG - classes: NXdistortion.nxdl.xml:/original_centre DEBUG - <> DEBUG - documentation (NXdistortion.nxdl.xml:/original_centre): -DEBUG - +DEBUG - For symmetry-guided distortion correction. Here we record the coordinates of the symmetry centre point. - + DEBUG - ===== FIELD (//entry/process/distortion/original_points): -DEBUG - value: [166. 283.] +DEBUG - value: [166. 283.] DEBUG - classpath: ['NXentry', 'NXprocess', 'NXdistortion', 'NX_FLOAT'] DEBUG - classes: NXdistortion.nxdl.xml:/original_points DEBUG - <> DEBUG - documentation (NXdistortion.nxdl.xml:/original_points): -DEBUG - +DEBUG - For symmetry-guided distortion correction. Here we record the coordinates of the relevant symmetry points. - + DEBUG - ===== FIELD (//entry/process/distortion/rdeform_field): DEBUG - value: [0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. ... DEBUG - classpath: ['NXentry', 'NXprocess', 'NXdistortion', 'NX_FLOAT'] @@ -3582,24 +3582,24 @@ DEBUG - classes: NXdistortion.nxdl.xml:/rdeform_field DEBUG - <> DEBUG - documentation (NXdistortion.nxdl.xml:/rdeform_field): -DEBUG - +DEBUG - Row deformation field for general non-rigid distortion corrections. 2D matrix holding the row information of the mapping of each original coordinate. - + DEBUG - ===== FIELD (//entry/process/distortion/symmetry): -DEBUG - value: 6 +DEBUG - value: 6 DEBUG - classpath: ['NXentry', 'NXprocess', 'NXdistortion', 'NX_INT'] DEBUG - classes: NXdistortion.nxdl.xml:/symmetry DEBUG - <> DEBUG - documentation (NXdistortion.nxdl.xml:/symmetry): -DEBUG - +DEBUG - For `symmetry-guided distortion correction`_, where a pattern of features is mapped to the regular geometric structure expected from the symmetry. Here we record the number of elementary symmetry operations. - + .. _symmetry-guided distortion correction: https://www.sciencedirect.com/science/article/abs/pii/S0304399118303474?via%3Dihub - + DEBUG - ===== GROUP (//entry/process/energy_calibration [NXmpes::/NXentry/NXprocess/NXcalibration]): DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration'] DEBUG - classes: @@ -3608,39 +3608,39 @@ NXprocess.nxdl.xml:/CALIBRATION NXcalibration.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/PROCESS/energy_calibration): -DEBUG - +DEBUG - DEBUG - documentation (NXprocess.nxdl.xml:/CALIBRATION): -DEBUG - +DEBUG - Describes the operations of calibration procedures, e.g. axis calibrations. - + DEBUG - documentation (NXcalibration.nxdl.xml:): -DEBUG - +DEBUG - Subclass of NXprocess to describe post-processing calibrations. - + DEBUG - ===== ATTRS (//entry/process/energy_calibration@NX_class) -DEBUG - value: NXcalibration +DEBUG - value: NXcalibration DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/PROCESS/energy_calibration NXprocess.nxdl.xml:/CALIBRATION NXcalibration.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/process/energy_calibration/applied): -DEBUG - value: True +DEBUG - value: True DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_BOOLEAN'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/PROCESS/energy_calibration/applied NXcalibration.nxdl.xml:/applied DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/PROCESS/energy_calibration/applied): -DEBUG - +DEBUG - Has an energy calibration been applied? - + DEBUG - documentation (NXcalibration.nxdl.xml:/applied): -DEBUG - +DEBUG - Has the calibration been applied? - + DEBUG - ===== FIELD (//entry/process/energy_calibration/calibrated_axis): DEBUG - value: [ 5.22069940e+01 5.10746894e+01 4.99673811e+01 4.88843387e+01 ... DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_FLOAT'] @@ -3649,36 +3649,30 @@ NXmpes.nxdl.xml:/ENTRY/PROCESS/energy_calibration/calibrated_axis NXcalibration.nxdl.xml:/calibrated_axis DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/PROCESS/energy_calibration/calibrated_axis): -DEBUG - +DEBUG - This is the calibrated energy axis to be used for data plotting. - + DEBUG - documentation (NXcalibration.nxdl.xml:/calibrated_axis): -DEBUG - +DEBUG - A vector representing the axis after calibration, matching the data length - + DEBUG - ===== FIELD (//entry/process/energy_calibration/fit_function): -DEBUG - value: b'(a0/(x0-a1))**2 + a2' +DEBUG - value: b'(a0/(x0-a1))**2 + a2' DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_CHAR'] DEBUG - classes: NXcalibration.nxdl.xml:/fit_function DEBUG - <> DEBUG - documentation (NXcalibration.nxdl.xml:/fit_function): -DEBUG - +DEBUG - For non-linear energy calibrations. Here we can store the formula of the fit function. - + Use a0, a1, ..., an for the coefficients, corresponding to the values in the coefficients field. - - Use x0, x1, ..., xn for the nth position in the `original_axis` field. - If there is the symbol attribute specified for the `original_axis` this may be used instead of x. - If you want to use the whole axis use `x`. - Alternate axis can also be available as specified by the `input_SYMBOL` field. - The data should then be referred here by the `SYMBOL` name, e.g., for a field - name `input_my_field` it should be referred here by `my_field` or `my_field0` if - you want to read the zeroth element of the array. - + + Use x0, x1, ..., xn for the variables. + The formula should be numpy compliant. - + DEBUG - ===== FIELD (//entry/process/energy_calibration/original_axis): DEBUG - value: [ 60027.77777778 60083.33333333 60138.88888889 60194.44444444 ... DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_FLOAT'] @@ -3686,9 +3680,9 @@ DEBUG - classes: NXcalibration.nxdl.xml:/original_axis DEBUG - <> DEBUG - documentation (NXcalibration.nxdl.xml:/original_axis): -DEBUG - +DEBUG - Vector containing the data coordinates in the original uncalibrated axis - + DEBUG - ===== GROUP (//entry/process/kx_calibration [NXmpes::/NXentry/NXprocess/NXcalibration]): DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration'] DEBUG - classes: @@ -3696,31 +3690,31 @@ NXprocess.nxdl.xml:/CALIBRATION NXcalibration.nxdl.xml: DEBUG - <> DEBUG - documentation (NXprocess.nxdl.xml:/CALIBRATION): -DEBUG - +DEBUG - Describes the operations of calibration procedures, e.g. axis calibrations. - + DEBUG - documentation (NXcalibration.nxdl.xml:): -DEBUG - +DEBUG - Subclass of NXprocess to describe post-processing calibrations. - + DEBUG - ===== ATTRS (//entry/process/kx_calibration@NX_class) -DEBUG - value: NXcalibration +DEBUG - value: NXcalibration DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration'] DEBUG - classes: NXprocess.nxdl.xml:/CALIBRATION NXcalibration.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/process/kx_calibration/applied): -DEBUG - value: True +DEBUG - value: True DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_BOOLEAN'] DEBUG - classes: NXcalibration.nxdl.xml:/applied DEBUG - <> DEBUG - documentation (NXcalibration.nxdl.xml:/applied): -DEBUG - +DEBUG - Has the calibration been applied? - + DEBUG - ===== FIELD (//entry/process/kx_calibration/calibrated_axis): DEBUG - value: [-2.68021375 -2.66974416 -2.65927458 -2.64880499 -2.63833541 -2.62786582 ... DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_FLOAT'] @@ -3728,29 +3722,29 @@ DEBUG - classes: NXcalibration.nxdl.xml:/calibrated_axis DEBUG - <> DEBUG - documentation (NXcalibration.nxdl.xml:/calibrated_axis): -DEBUG - +DEBUG - A vector representing the axis after calibration, matching the data length - + DEBUG - ===== FIELD (//entry/process/kx_calibration/offset): -DEBUG - value: 256.0 +DEBUG - value: 256.0 DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_FLOAT'] DEBUG - classes: NXcalibration.nxdl.xml:/offset DEBUG - <> DEBUG - documentation (NXcalibration.nxdl.xml:/offset): -DEBUG - +DEBUG - For linear calibration. Offset parameter. - + DEBUG - ===== FIELD (//entry/process/kx_calibration/scaling): -DEBUG - value: 0.01046958495673419 +DEBUG - value: 0.01046958495673419 DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_FLOAT'] DEBUG - classes: NXcalibration.nxdl.xml:/scaling DEBUG - <> DEBUG - documentation (NXcalibration.nxdl.xml:/scaling): -DEBUG - +DEBUG - For linear calibration. Scaling parameter. - + DEBUG - ===== GROUP (//entry/process/ky_calibration [NXmpes::/NXentry/NXprocess/NXcalibration]): DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration'] DEBUG - classes: @@ -3758,31 +3752,31 @@ NXprocess.nxdl.xml:/CALIBRATION NXcalibration.nxdl.xml: DEBUG - <> DEBUG - documentation (NXprocess.nxdl.xml:/CALIBRATION): -DEBUG - +DEBUG - Describes the operations of calibration procedures, e.g. axis calibrations. - + DEBUG - documentation (NXcalibration.nxdl.xml:): -DEBUG - +DEBUG - Subclass of NXprocess to describe post-processing calibrations. - + DEBUG - ===== ATTRS (//entry/process/ky_calibration@NX_class) -DEBUG - value: NXcalibration +DEBUG - value: NXcalibration DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration'] DEBUG - classes: NXprocess.nxdl.xml:/CALIBRATION NXcalibration.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/process/ky_calibration/applied): -DEBUG - value: True +DEBUG - value: True DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_BOOLEAN'] DEBUG - classes: NXcalibration.nxdl.xml:/applied DEBUG - <> DEBUG - documentation (NXcalibration.nxdl.xml:/applied): -DEBUG - +DEBUG - Has the calibration been applied? - + DEBUG - ===== FIELD (//entry/process/ky_calibration/calibrated_axis): DEBUG - value: [-2.68021375 -2.66974416 -2.65927458 -2.64880499 -2.63833541 -2.62786582 ... DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_FLOAT'] @@ -3790,29 +3784,29 @@ DEBUG - classes: NXcalibration.nxdl.xml:/calibrated_axis DEBUG - <> DEBUG - documentation (NXcalibration.nxdl.xml:/calibrated_axis): -DEBUG - +DEBUG - A vector representing the axis after calibration, matching the data length - + DEBUG - ===== FIELD (//entry/process/ky_calibration/offset): -DEBUG - value: 256.0 +DEBUG - value: 256.0 DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_FLOAT'] DEBUG - classes: NXcalibration.nxdl.xml:/offset DEBUG - <> DEBUG - documentation (NXcalibration.nxdl.xml:/offset): -DEBUG - +DEBUG - For linear calibration. Offset parameter. - + DEBUG - ===== FIELD (//entry/process/ky_calibration/scaling): -DEBUG - value: 0.01046958495673419 +DEBUG - value: 0.01046958495673419 DEBUG - classpath: ['NXentry', 'NXprocess', 'NXcalibration', 'NX_FLOAT'] DEBUG - classes: NXcalibration.nxdl.xml:/scaling DEBUG - <> DEBUG - documentation (NXcalibration.nxdl.xml:/scaling): -DEBUG - +DEBUG - For linear calibration. Scaling parameter. - + DEBUG - ===== GROUP (//entry/process/registration [NXmpes::/NXentry/NXprocess/NXregistration]): DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration'] DEBUG - classes: @@ -3820,42 +3814,42 @@ NXprocess.nxdl.xml:/REGISTRATION NXregistration.nxdl.xml: DEBUG - <> DEBUG - documentation (NXprocess.nxdl.xml:/REGISTRATION): -DEBUG - +DEBUG - Describes the operations of image registration - + DEBUG - documentation (NXregistration.nxdl.xml:): -DEBUG - +DEBUG - Describes image registration procedures. - + DEBUG - ===== ATTRS (//entry/process/registration@NX_class) -DEBUG - value: NXregistration +DEBUG - value: NXregistration DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration'] DEBUG - classes: NXprocess.nxdl.xml:/REGISTRATION NXregistration.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/process/registration/applied): -DEBUG - value: True +DEBUG - value: True DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NX_BOOLEAN'] DEBUG - classes: NXregistration.nxdl.xml:/applied DEBUG - <> DEBUG - documentation (NXregistration.nxdl.xml:/applied): -DEBUG - +DEBUG - Has the registration been applied? - + DEBUG - ===== FIELD (//entry/process/registration/depends_on): -DEBUG - value: b'/entry/process/registration/tranformations/rot_z' +DEBUG - value: b'/entry/process/registration/tranformations/rot_z' DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NX_CHAR'] DEBUG - classes: NXregistration.nxdl.xml:/depends_on DEBUG - <> DEBUG - documentation (NXregistration.nxdl.xml:/depends_on): -DEBUG - +DEBUG - Specifies the position by pointing to the last transformation in the transformation chain in the NXtransformations group. - + DEBUG - ===== GROUP (//entry/process/registration/tranformations [NXmpes::/NXentry/NXprocess/NXregistration/NXtransformations]): DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations'] DEBUG - classes: @@ -3863,12 +3857,12 @@ NXregistration.nxdl.xml:/TRANSFORMATIONS NXtransformations.nxdl.xml: DEBUG - <> DEBUG - documentation (NXregistration.nxdl.xml:/TRANSFORMATIONS): -DEBUG - +DEBUG - To describe the operations of image registration (combinations of rigid translations and rotations) - + DEBUG - documentation (NXtransformations.nxdl.xml:): -DEBUG - +DEBUG - Collection of axis-based translations and rotations to describe a geometry. May also contain axes that do not move and therefore do not have a transformation type specified, but are useful in understanding coordinate frames within which @@ -3921,10 +3915,10 @@ DEBUG - about an axis in the direction of ``vector``, of angle of the field value. NOTE - + One possible use of ``NXtransformations`` is to define the motors and transformations for a diffractometer (goniometer). Such use is mentioned - in the ``NXinstrument`` base class. Use one ``NXtransformations`` group + in the ``NXinstrument`` base class. Use one ``NXtransformations`` group for each diffractometer and name the group appropriate to the device. Collecting the motors of a sample table or xyz-stage in an NXtransformations group is equally possible. @@ -3943,23 +3937,23 @@ DEBUG - * depends_on as needed. - + DEBUG - ===== ATTRS (//entry/process/registration/tranformations@NX_class) -DEBUG - value: NXtransformations +DEBUG - value: NXtransformations DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations'] DEBUG - classes: NXregistration.nxdl.xml:/TRANSFORMATIONS NXtransformations.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/process/registration/tranformations/rot_z): -DEBUG - value: -1.0 +DEBUG - value: -1.0 DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -3969,34 +3963,34 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/process/registration/tranformations/rot_z@depends_on) -DEBUG - value: trans_y +DEBUG - value: trans_y DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/process/registration/tranformations/rot_z@offset) -DEBUG - value: [256. 256. 0.] +DEBUG - value: [256. 256. 0.] DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@offset - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/offset): -DEBUG - +DEBUG - A fixed offset applied before the transformation (three vector components). This is not intended to be a substitute for a fixed ``translation`` axis but, for example, as the mechanical offset from mounting the axis to its dependency. - + DEBUG - ===== ATTRS (//entry/process/registration/tranformations/rot_z@transformation_type) -DEBUG - value: rotation +DEBUG - value: rotation DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -4006,7 +4000,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -4015,22 +4009,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/process/registration/tranformations/rot_z@units) -DEBUG - value: degrees +DEBUG - value: degrees DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/process/registration/tranformations/rot_z@vector) -DEBUG - value: [0. 0. 1.] +DEBUG - value: [0. 0. 1.] DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -4038,15 +4032,15 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/process/registration/tranformations/trans_x): -DEBUG - value: 43.0 +DEBUG - value: 43.0 DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -4056,21 +4050,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/process/registration/tranformations/trans_x@depends_on) -DEBUG - value: . +DEBUG - value: . DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/process/registration/tranformations/trans_x@transformation_type) -DEBUG - value: translation +DEBUG - value: translation DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -4080,7 +4074,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -4089,22 +4083,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/process/registration/tranformations/trans_x@units) -DEBUG - value: pixels +DEBUG - value: pixels DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/process/registration/tranformations/trans_x@vector) -DEBUG - value: [1. 0. 0.] +DEBUG - value: [1. 0. 0.] DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -4112,15 +4106,15 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/process/registration/tranformations/trans_y): -DEBUG - value: 55.0 +DEBUG - value: 55.0 DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -4130,21 +4124,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/process/registration/tranformations/trans_y@depends_on) -DEBUG - value: trans_x +DEBUG - value: trans_x DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/process/registration/tranformations/trans_y@transformation_type) -DEBUG - value: translation +DEBUG - value: translation DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -4154,7 +4148,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -4163,22 +4157,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/process/registration/tranformations/trans_y@units) -DEBUG - value: pixels +DEBUG - value: pixels DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/process/registration/tranformations/trans_y@vector) -DEBUG - value: [0. 1. 0.] +DEBUG - value: [0. 1. 0.] DEBUG - classpath: ['NXentry', 'NXprocess', 'NXregistration', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -4186,7 +4180,7 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== GROUP (//entry/sample [NXmpes::/NXentry/NXsample]): DEBUG - classpath: ['NXentry', 'NXsample'] DEBUG - classes: @@ -4195,59 +4189,59 @@ NXentry.nxdl.xml:/SAMPLE NXsample.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/SAMPLE): -DEBUG - +DEBUG - DEBUG - documentation (NXentry.nxdl.xml:/SAMPLE): -DEBUG - +DEBUG - DEBUG - documentation (NXsample.nxdl.xml:): -DEBUG - +DEBUG - Any information on the sample. - + This could include scanned variables that are associated with one of the data dimensions, e.g. the magnetic field, or logged data, e.g. monitored temperature vs elapsed time. - + DEBUG - ===== ATTRS (//entry/sample@NX_class) -DEBUG - value: NXsample +DEBUG - value: NXsample DEBUG - classpath: ['NXentry', 'NXsample'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE NXentry.nxdl.xml:/SAMPLE NXsample.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/sample/bias): -DEBUG - value: 17.799719004221362 +DEBUG - value: 17.799719004221362 DEBUG - classpath: ['NXentry', 'NXsample', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/bias DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/SAMPLE/bias): -DEBUG - +DEBUG - Voltage applied to sample and sample holder. - + DEBUG - ===== ATTRS (//entry/sample/bias@units) -DEBUG - value: V +DEBUG - value: V DEBUG - classpath: ['NXentry', 'NXsample', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/bias DEBUG - NXmpes.nxdl.xml:/ENTRY/SAMPLE/bias@units [NX_VOLTAGE] DEBUG - ===== FIELD (//entry/sample/chemical_formula): -DEBUG - value: b'MoTe2' +DEBUG - value: b'MoTe2' DEBUG - classpath: ['NXentry', 'NXsample', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/chemical_formula NXsample.nxdl.xml:/chemical_formula DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/SAMPLE/chemical_formula): -DEBUG - +DEBUG - The chemical formula of the sample. For mixtures use the NXsample_component group in NXsample instead. - + DEBUG - documentation (NXsample.nxdl.xml:/chemical_formula): -DEBUG - +DEBUG - The chemical formula specified using CIF conventions. Abbreviated version of CIF standard: - + * Only recognized element symbols may be used. * Each element symbol is followed by a 'count' number. A count of '1' may be omitted. * A space or parenthesis must separate each cluster of (element symbol + count). @@ -4258,80 +4252,80 @@ DEBUG - structure, the order of the elements within any group or moiety depends on whether or not carbon is present. * If carbon is present, the order should be: - + - C, then H, then the other elements in alphabetical order of their symbol. - If carbon is not present, the elements are listed purely in alphabetic order of their symbol. - + * This is the *Hill* system used by Chemical Abstracts. - + DEBUG - ===== FIELD (//entry/sample/depends_on): -DEBUG - value: b'/entry/sample/transformations/corrected_phi' +DEBUG - value: b'/entry/sample/transformations/corrected_phi' DEBUG - classpath: ['NXentry', 'NXsample', 'NX_CHAR'] DEBUG - classes: NXsample.nxdl.xml:/depends_on DEBUG - <> DEBUG - documentation (NXsample.nxdl.xml:/depends_on): -DEBUG - +DEBUG - NeXus positions components by applying a set of translations and rotations to apply to the component starting from 0, 0, 0. The order of these operations is critical and forms what NeXus calls a dependency chain. The depends_on field defines the path to the top most operation of the dependency chain or the string "." if located in the origin. Usually these operations are stored in a NXtransformations group. But NeXus allows them to be stored anywhere. - + DEBUG - ===== FIELD (//entry/sample/description): -DEBUG - value: b'MoTe2' +DEBUG - value: b'MoTe2' DEBUG - classpath: ['NXentry', 'NXsample', 'NX_CHAR'] DEBUG - classes: NXsample.nxdl.xml:/description DEBUG - <> DEBUG - documentation (NXsample.nxdl.xml:/description): -DEBUG - +DEBUG - Description of the sample - + DEBUG - ===== FIELD (//entry/sample/gas_pressure): -DEBUG - value: 4.5599999999999996e-11 +DEBUG - value: 4.5599999999999996e-11 DEBUG - classpath: ['NXentry', 'NXsample', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/gas_pressure DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/SAMPLE/gas_pressure): -DEBUG - +DEBUG - DEBUG - ===== ATTRS (//entry/sample/gas_pressure@units) -DEBUG - value: mbar +DEBUG - value: mbar DEBUG - classpath: ['NXentry', 'NXsample', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/gas_pressure DEBUG - NXmpes.nxdl.xml:/ENTRY/SAMPLE/gas_pressure@units [NX_PRESSURE] DEBUG - ===== FIELD (//entry/sample/name): -DEBUG - value: b'MoTe2' +DEBUG - value: b'MoTe2' DEBUG - classpath: ['NXentry', 'NXsample', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/name NXsample.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/SAMPLE/name): -DEBUG - +DEBUG - DEBUG - documentation (NXsample.nxdl.xml:/name): -DEBUG - +DEBUG - Descriptive name of sample - + DEBUG - ===== FIELD (//entry/sample/preparation_date): -DEBUG - value: b'2019-05-22T14:00:00+00:00' +DEBUG - value: b'2019-05-22T14:00:00+00:00' DEBUG - classpath: ['NXentry', 'NXsample', 'NX_DATE_TIME'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/preparation_date NXsample.nxdl.xml:/preparation_date DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/SAMPLE/preparation_date): -DEBUG - +DEBUG - Date of preparation of the sample for the XPS experiment (i.e. cleaving, last annealing). - + DEBUG - documentation (NXsample.nxdl.xml:/preparation_date): -DEBUG - +DEBUG - Date of preparation of the sample - + DEBUG - ===== GROUP (//entry/sample/preparation_description [NXmpes::/NXentry/NXsample/NXnote]): DEBUG - classpath: ['NXentry', 'NXsample', 'NXnote'] DEBUG - classes: @@ -4339,30 +4333,30 @@ NXmpes.nxdl.xml:/ENTRY/SAMPLE/preparation_description NXnote.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/SAMPLE/preparation_description): -DEBUG - +DEBUG - Description of the surface preparation technique for the XPS experiment, i.e. UHV cleaving, in-situ growth, sputtering/annealing etc. Ideally, a full report of the previous operations, in any format(NXnote allows to add pictures, audio, movies). Alternatively, a reference to the location or a unique identifier or other metadata file. In the case these are not available, free-text description. - + DEBUG - documentation (NXnote.nxdl.xml:): -DEBUG - +DEBUG - Any additional freeform information not covered by the other base classes. - - This class can be used to store additional information in a + + This class can be used to store additional information in a NeXus file e.g. pictures, movies, audio, additional text logs - + DEBUG - ===== ATTRS (//entry/sample/preparation_description@NX_class) -DEBUG - value: NXnote +DEBUG - value: NXnote DEBUG - classpath: ['NXentry', 'NXsample', 'NXnote'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/preparation_description NXnote.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/sample/preparation_description/description): -DEBUG - value: b'Here should be a description of the preparation procedure.' +DEBUG - value: b'Here should be a description of the preparation procedure.' DEBUG - classpath: ['NXentry', 'NXsample', 'NXnote', 'NX_CHAR'] DEBUG - classes: NXnote.nxdl.xml:/description @@ -4376,30 +4370,30 @@ NXmpes.nxdl.xml:/ENTRY/SAMPLE/sample_history NXnote.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/SAMPLE/sample_history): -DEBUG - +DEBUG - A descriptor to keep track of the treatment of the sample before entering the photoemission experiment. Ideally, a full report of the previous operations, in any format (NXnote allows to add pictures, audio, movies). Alternatively, a reference to the location or a unique identifier or other metadata file. In the case these are not available, free-text description. - + DEBUG - documentation (NXnote.nxdl.xml:): -DEBUG - +DEBUG - Any additional freeform information not covered by the other base classes. - - This class can be used to store additional information in a + + This class can be used to store additional information in a NeXus file e.g. pictures, movies, audio, additional text logs - + DEBUG - ===== ATTRS (//entry/sample/sample_history@NX_class) -DEBUG - value: NXnote +DEBUG - value: NXnote DEBUG - classpath: ['NXentry', 'NXsample', 'NXnote'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/sample_history NXnote.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/sample/sample_history/description): -DEBUG - value: b'Cleaved' +DEBUG - value: b'Cleaved' DEBUG - classpath: ['NXentry', 'NXsample', 'NXnote', 'NX_CHAR'] DEBUG - classes: NXnote.nxdl.xml:/description @@ -4407,7 +4401,7 @@ DEBUG - <> DEBUG - documentation (NXnote.nxdl.xml:/description): DEBUG - Title of an image or other details of the note DEBUG - ===== FIELD (//entry/sample/situation): -DEBUG - value: b'vacuum' +DEBUG - value: b'vacuum' DEBUG - classpath: ['NXentry', 'NXsample', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/situation @@ -4427,33 +4421,33 @@ DEBUG - -> reducing atmosphere DEBUG - -> sealed can DEBUG - -> other DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/SAMPLE/situation): -DEBUG - +DEBUG - DEBUG - documentation (NXsample.nxdl.xml:/situation): -DEBUG - +DEBUG - The atmosphere will be one of the components, which is where its details will be stored; the relevant components will be indicated by the entry in the sample_component member. - + DEBUG - ===== FIELD (//entry/sample/temperature): -DEBUG - value: 23.050763803680983 +DEBUG - value: 23.050763803680983 DEBUG - classpath: ['NXentry', 'NXsample', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/temperature NXsample.nxdl.xml:/temperature DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/SAMPLE/temperature): -DEBUG - +DEBUG - In the case of a fixed temperature measurement this is the scalar temperature of the sample. In the case of an experiment in which the temperature is changed and recoded, this is an array of length m of temperatures. This should be a link to /entry/instrument/manipulator/sample_temperature. - + DEBUG - documentation (NXsample.nxdl.xml:/temperature): -DEBUG - +DEBUG - Sample temperature. This could be a scanned variable - + DEBUG - ===== ATTRS (//entry/sample/temperature@units) -DEBUG - value: K +DEBUG - value: K DEBUG - classpath: ['NXentry', 'NXsample', 'NX_FLOAT'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/SAMPLE/temperature @@ -4467,14 +4461,14 @@ NXsample.nxdl.xml:/TRANSFORMATIONS NXtransformations.nxdl.xml: DEBUG - <> DEBUG - documentation (NXsample.nxdl.xml:/TRANSFORMATIONS): -DEBUG - +DEBUG - This is the group recommended for holding the chain of translation and rotation operations necessary to position the component within the instrument. The dependency chain may however traverse similar groups in other component groups. - + DEBUG - documentation (NXtransformations.nxdl.xml:): -DEBUG - +DEBUG - Collection of axis-based translations and rotations to describe a geometry. May also contain axes that do not move and therefore do not have a transformation type specified, but are useful in understanding coordinate frames within which @@ -4527,10 +4521,10 @@ DEBUG - about an axis in the direction of ``vector``, of angle of the field value. NOTE - + One possible use of ``NXtransformations`` is to define the motors and transformations for a diffractometer (goniometer). Such use is mentioned - in the ``NXinstrument`` base class. Use one ``NXtransformations`` group + in the ``NXinstrument`` base class. Use one ``NXtransformations`` group for each diffractometer and name the group appropriate to the device. Collecting the motors of a sample table or xyz-stage in an NXtransformations group is equally possible. @@ -4549,23 +4543,23 @@ DEBUG - * depends_on as needed. - + DEBUG - ===== ATTRS (//entry/sample/transformations@NX_class) -DEBUG - value: NXtransformations +DEBUG - value: NXtransformations DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations'] DEBUG - classes: NXsample.nxdl.xml:/TRANSFORMATIONS NXtransformations.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/sample/transformations/corrected_phi): -DEBUG - value: 90.0 +DEBUG - value: 90.0 DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -4575,21 +4569,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/sample/transformations/corrected_phi@depends_on) -DEBUG - value: rot_omg +DEBUG - value: rot_omg DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/sample/transformations/corrected_phi@transformation_type) -DEBUG - value: rotation +DEBUG - value: rotation DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -4599,7 +4593,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -4608,22 +4602,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/sample/transformations/corrected_phi@units) -DEBUG - value: degrees +DEBUG - value: degrees DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/sample/transformations/corrected_phi@vector) -DEBUG - value: [0 1 0] +DEBUG - value: [0 1 0] DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -4631,15 +4625,15 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/sample/transformations/rot_omg): -DEBUG - value: 131.7 +DEBUG - value: 131.7 DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -4649,21 +4643,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/sample/transformations/rot_omg@depends_on) -DEBUG - value: rot_phi +DEBUG - value: rot_phi DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/sample/transformations/rot_omg@transformation_type) -DEBUG - value: rotation +DEBUG - value: rotation DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -4673,7 +4667,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -4682,22 +4676,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/sample/transformations/rot_omg@units) -DEBUG - value: degrees +DEBUG - value: degrees DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/sample/transformations/rot_omg@vector) -DEBUG - value: [1 0 0] +DEBUG - value: [1 0 0] DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -4705,15 +4699,15 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/sample/transformations/rot_phi): -DEBUG - value: 2.5 +DEBUG - value: 2.5 DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -4723,21 +4717,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/sample/transformations/rot_phi@depends_on) -DEBUG - value: rot_tht +DEBUG - value: rot_tht DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/sample/transformations/rot_phi@transformation_type) -DEBUG - value: rotation +DEBUG - value: rotation DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -4747,7 +4741,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -4756,22 +4750,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/sample/transformations/rot_phi@units) -DEBUG - value: degrees +DEBUG - value: degrees DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/sample/transformations/rot_phi@vector) -DEBUG - value: [0 1 0] +DEBUG - value: [0 1 0] DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -4779,15 +4773,15 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/sample/transformations/rot_tht): -DEBUG - value: 401.18 +DEBUG - value: 401.18 DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -4797,21 +4791,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/sample/transformations/rot_tht@depends_on) -DEBUG - value: trans_z +DEBUG - value: trans_z DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/sample/transformations/rot_tht@transformation_type) -DEBUG - value: rotation +DEBUG - value: rotation DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -4821,7 +4815,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -4830,22 +4824,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/sample/transformations/rot_tht@units) -DEBUG - value: degrees +DEBUG - value: degrees DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/sample/transformations/rot_tht@vector) -DEBUG - value: [0 0 1] +DEBUG - value: [0 0 1] DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -4853,15 +4847,15 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/sample/transformations/trans_x): -DEBUG - value: 2.65 +DEBUG - value: 2.65 DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -4871,21 +4865,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/sample/transformations/trans_x@depends_on) -DEBUG - value: /entry/instrument/manipulator/transformations/trans_z +DEBUG - value: /entry/instrument/manipulator/transformations/trans_z DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/sample/transformations/trans_x@transformation_type) -DEBUG - value: translation +DEBUG - value: translation DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -4895,7 +4889,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -4904,22 +4898,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/sample/transformations/trans_x@units) -DEBUG - value: mm +DEBUG - value: mm DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/sample/transformations/trans_x@vector) -DEBUG - value: [1 0 0] +DEBUG - value: [1 0 0] DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -4927,15 +4921,15 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/sample/transformations/trans_y): -DEBUG - value: -4.321 +DEBUG - value: -4.321 DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -4945,21 +4939,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/sample/transformations/trans_y@depends_on) -DEBUG - value: trans_x +DEBUG - value: trans_x DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/sample/transformations/trans_y@transformation_type) -DEBUG - value: translation +DEBUG - value: translation DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -4969,7 +4963,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -4978,22 +4972,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/sample/transformations/trans_y@units) -DEBUG - value: mm +DEBUG - value: mm DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/sample/transformations/trans_y@vector) -DEBUG - value: [0 1 0] +DEBUG - value: [0 1 0] DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -5001,15 +4995,15 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/sample/transformations/trans_z): -DEBUG - value: 34.82 +DEBUG - value: 34.82 DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME): -DEBUG - +DEBUG - Units need to be appropriate for translation or rotation The name of this field is not forced. The user is free to use any name @@ -5019,21 +5013,21 @@ DEBUG - The values given should be the start points of exposures for the corresponding frames. The end points should be given in ``AXISNAME_end``. - + DEBUG - ===== ATTRS (//entry/sample/transformations/trans_z@depends_on) -DEBUG - value: trans_y +DEBUG - value: trans_y DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@depends_on - [NX_CHAR] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/depends_on): -DEBUG - +DEBUG - Points to the path to a field defining the axis on which this depends or the string ".". - + DEBUG - ===== ATTRS (//entry/sample/transformations/trans_z@transformation_type) -DEBUG - value: translation +DEBUG - value: translation DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME @@ -5043,7 +5037,7 @@ DEBUG - enumeration (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): DEBUG - -> translation DEBUG - -> rotation DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/transformation_type): -DEBUG - +DEBUG - The transformation_type may be ``translation``, in which case the values are linear displacements along the axis, ``rotation``, in which case the values are angular rotations around the axis. @@ -5052,22 +5046,22 @@ DEBUG - is no motion to be specifies, such as the direction of gravity, or the direction to the source, or a basis vector of a coordinate frame. - + DEBUG - ===== ATTRS (//entry/sample/transformations/trans_z@units) -DEBUG - value: mm +DEBUG - value: mm DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@units [NX_TRANSFORMATION] DEBUG - ===== ATTRS (//entry/sample/transformations/trans_z@vector) -DEBUG - value: [0 0 1] +DEBUG - value: [0 0 1] DEBUG - classpath: ['NXentry', 'NXsample', 'NXtransformations', 'NX_NUMBER'] DEBUG - classes: NXtransformations.nxdl.xml:/AXISNAME DEBUG - NXtransformations.nxdl.xml:/AXISNAME@vector - [NX_NUMBER] DEBUG - <> DEBUG - documentation (NXtransformations.nxdl.xml:/AXISNAME/vector): -DEBUG - +DEBUG - Three values that define the axis for this transformation. The axis should be normalized to unit length, making it dimensionless. For ``rotation`` axes, the direction should be @@ -5075,35 +5069,35 @@ DEBUG - For ``translation`` axes the direction should be chosen for increasing displacement. For general axes, an appropriate direction should be chosen. - + DEBUG - ===== FIELD (//entry/start_time): -DEBUG - value: b'2019-05-23T18:13:54.657000+00:00' +DEBUG - value: b'2019-05-23T18:13:54.657000+00:00' DEBUG - classpath: ['NXentry', 'NX_DATE_TIME'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/start_time NXentry.nxdl.xml:/start_time DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/start_time): -DEBUG - +DEBUG - Datetime of the start of the measurement. - + DEBUG - documentation (NXentry.nxdl.xml:/start_time): -DEBUG - +DEBUG - Starting time of measurement - + DEBUG - ===== FIELD (//entry/title): -DEBUG - value: b'Valence Band Dynamics - 1030 nm linear p-polarized pump, 0.6 mJ/cm2 absorbed fluence' +DEBUG - value: b'Valence Band Dynamics - 1030 nm linear p-polarized pump, 0.6 mJ/cm2 absorbed fluence' DEBUG - classpath: ['NXentry', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/title NXentry.nxdl.xml:/title DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/title): -DEBUG - +DEBUG - DEBUG - documentation (NXentry.nxdl.xml:/title): -DEBUG - +DEBUG - Extended title for entry - + DEBUG - ===== GROUP (//entry/user [NXmpes::/NXentry/NXuser]): DEBUG - classpath: ['NXentry', 'NXuser'] DEBUG - classes: @@ -5112,130 +5106,130 @@ NXentry.nxdl.xml:/USER NXuser.nxdl.xml: DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/USER): -DEBUG - +DEBUG - Contact information of at least the user of the instrument or the investigator who performed this experiment. Adding multiple users if relevant is recommended. - + DEBUG - documentation (NXentry.nxdl.xml:/USER): -DEBUG - +DEBUG - DEBUG - documentation (NXuser.nxdl.xml:): -DEBUG - - Contact information for a user. - - The format allows more - than one user with the same affiliation and contact information, - but a second :ref:`NXuser` group should be used if they have different +DEBUG - + Contact information for a user. + + The format allows more + than one user with the same affiliation and contact information, + but a second :ref:`NXuser` group should be used if they have different affiliations, etc. - + DEBUG - ===== ATTRS (//entry/user@NX_class) -DEBUG - value: NXuser +DEBUG - value: NXuser DEBUG - classpath: ['NXentry', 'NXuser'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/USER NXentry.nxdl.xml:/USER NXuser.nxdl.xml: DEBUG - @NX_class [NX_CHAR] -DEBUG - +DEBUG - DEBUG - ===== FIELD (//entry/user/address): -DEBUG - value: b'Faradayweg 4-6, 14195 Berlin' +DEBUG - value: b'Faradayweg 4-6, 14195 Berlin' DEBUG - classpath: ['NXentry', 'NXuser', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/USER/address NXuser.nxdl.xml:/address DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/USER/address): -DEBUG - +DEBUG - Full address (street, street number, ZIP, city, country) of the user's affiliation. - + DEBUG - documentation (NXuser.nxdl.xml:/address): DEBUG - Address of user DEBUG - ===== FIELD (//entry/user/affiliation): -DEBUG - value: b'Fritz Haber Institute of the Max Planck Society' +DEBUG - value: b'Fritz Haber Institute of the Max Planck Society' DEBUG - classpath: ['NXentry', 'NXuser', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/USER/affiliation NXuser.nxdl.xml:/affiliation DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/USER/affiliation): -DEBUG - +DEBUG - Name of the affiliation of the user at the point in time when the experiment was performed. - + DEBUG - documentation (NXuser.nxdl.xml:/affiliation): DEBUG - Affiliation of user DEBUG - ===== FIELD (//entry/user/email): -DEBUG - value: b'beaulieu@fhi-berlin.mpg.de' +DEBUG - value: b'beaulieu@fhi-berlin.mpg.de' DEBUG - classpath: ['NXentry', 'NXuser', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/USER/email NXuser.nxdl.xml:/email DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/USER/email): -DEBUG - +DEBUG - Email address of the user. - + DEBUG - documentation (NXuser.nxdl.xml:/email): DEBUG - Email of user DEBUG - ===== FIELD (//entry/user/name): -DEBUG - value: b'Samuel Beaulieu' +DEBUG - value: b'Samuel Beaulieu' DEBUG - classpath: ['NXentry', 'NXuser', 'NX_CHAR'] DEBUG - classes: NXmpes.nxdl.xml:/ENTRY/USER/name NXuser.nxdl.xml:/name DEBUG - <> DEBUG - documentation (NXmpes.nxdl.xml:/ENTRY/USER/name): -DEBUG - +DEBUG - Name of the user. - + DEBUG - documentation (NXuser.nxdl.xml:/name): DEBUG - Name of user responsible for this entry DEBUG - ===== FIELD (//entry/user/role): -DEBUG - value: b'Principal Investigator' +DEBUG - value: b'Principal Investigator' DEBUG - classpath: ['NXentry', 'NXuser', 'NX_CHAR'] DEBUG - classes: NXuser.nxdl.xml:/role DEBUG - <> DEBUG - documentation (NXuser.nxdl.xml:/role): -DEBUG - +DEBUG - Role of user responsible for this entry. - Suggested roles are "local_contact", + Suggested roles are "local_contact", "principal_investigator", and "proposer" - + DEBUG - ======================== DEBUG - === Default Plotable === DEBUG - ======================== -DEBUG - +DEBUG - DEBUG - NXentry has been identified: /entry -DEBUG - +DEBUG - DEBUG - NXdata group has been identified: /entry/data DEBUG - ===== GROUP (//entry/data [NXmpes::/NXentry/NXdata]): DEBUG - ===== ATTRS (//entry/data@NX_class) -DEBUG - value: NXdata +DEBUG - value: NXdata DEBUG - ===== ATTRS (//entry/data@axes) -DEBUG - value: ['kx' 'ky' 'energy' 'delay'] +DEBUG - value: ['kx' 'ky' 'energy' 'delay'] DEBUG - ===== ATTRS (//entry/data@delay_indices) -DEBUG - value: 3 +DEBUG - value: 3 DEBUG - ===== ATTRS (//entry/data@energy_indices) -DEBUG - value: 2 +DEBUG - value: 2 DEBUG - ===== ATTRS (//entry/data@kx_indices) -DEBUG - value: 0 +DEBUG - value: 0 DEBUG - ===== ATTRS (//entry/data@ky_indices) -DEBUG - value: 1 +DEBUG - value: 1 DEBUG - ===== ATTRS (//entry/data@signal) -DEBUG - value: data -DEBUG - +DEBUG - value: data +DEBUG - DEBUG - Signal has been identified: /entry/data/data DEBUG - ===== FIELD (//entry/data/data): DEBUG - value: [[[1.14760e+04 1.64560e+04 1.55440e+04 1.48940e+04 1.08810e+04] ... DEBUG - Dataset referenced as NXdata SIGNAL DEBUG - ===== ATTRS (//entry/data/data@units) -DEBUG - value: counts -DEBUG - +DEBUG - value: counts +DEBUG - DEBUG - For Axis #0, 1 axes have been identified: [] -DEBUG - +DEBUG - DEBUG - For Axis #1, 1 axes have been identified: [] -DEBUG - +DEBUG - DEBUG - For Axis #2, 1 axes have been identified: [] -DEBUG - +DEBUG - DEBUG - For Axis #3, 1 axes have been identified: []