This mod replaces:
- The stock MGN7H rail on the V0.2 X axis with an MGN9C rail
- The stock AB drive frames with modified ones that have additional clearance for the MGN9C carriage
In addition to the hardware needed for the stock build:
- 1x MGN9C 150mm linear rail
- 10x M3x8 BHCS
- 6x M3 Nuts
Assembly is the mostly the same as the stock V0.2 X axis and AB frames. The MGN9C rail mounts to the X axis extrusion with 6x M3x8 BHCS screws and nuts, and the X carriage mounts to the MGN9C carriage with 4x M3x8 BHCS screws.
