From 321464d889c05dda21969370e2a7490f0f78bae8 Mon Sep 17 00:00:00 2001 From: Stephen Papierski Date: Tue, 20 Aug 2024 08:18:23 -0600 Subject: [PATCH] Fix typo and wording for automatic sensor calibration --- static/bed-presence-mk1/getting-started.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/static/bed-presence-mk1/getting-started.md b/static/bed-presence-mk1/getting-started.md index 61dfb4e..89922c6 100644 --- a/static/bed-presence-mk1/getting-started.md +++ b/static/bed-presence-mk1/getting-started.md @@ -63,12 +63,12 @@ Welcome to Bed Presence for ESPHome! This page contains everything you need to g The calibration process requires you to get into and our of your bed. It records the sensor readings while the bed is both occupied and unoccupied and automatically calculates the best trigger pressure. 1. Navigate to the device under Home Assistant Devices. Find the `Configuration` section. -2. Have the person you are calibration for gently lay on their side of the bed. -3. Let the sensor settle for a few seconds and press `Calibrate Occupied` for the desired side of the bed. +2. Have the person you are calibrating for gently lay on their side of the bed. +3. Let the sensor settle for a few seconds and press `Calibrate Occupied` for the correct side of the bed. 4. Get out of bed. -5. Leave the entire bed unoccupied for a couple minutes, then press `Calibrate Unoccupied` for the desired side of the bed. -6. Repeat for other side of bed. -7. The goal of the automatic calibration is to get the value close to optimal. If you find that you are getting false triggers, want to increase/decrease sensitivity, etc, continue to `Manual Sensor Calibration`. +5. Leave the entire bed unoccupied for a couple minutes, then press `Calibrate Unoccupied` for the correct side of the bed. +6. Repeat for the other side of the bed. +7. The goal of the automatic calibration is to get the trigger value to a good starting point. If you find that you are getting false triggers, want to increase/decrease sensitivity, etc, continue to `Manual Sensor Calibration`. ## Manual Sensor Calibration 1. Alternatively, you can manually set the `Trigger Pressure`. Viewing the graph of the sensor pressure can help guide your desired pressure.