RasPi v5 8GB w/ a single RTL v4?

[funman1steve]

Has anyone gotten SDRTrunk to run on a Raspi v5 8GB w/ just one RTL V4?
I have a remote location I need to install a system at and they only have solar / battery power. And they don't want me to run an inverter, so my usual answer of an I5 Dell PC is out.
It looked like a few got it running on a Raspi v4 and even v3, so I assume a v5 would work and possibly even better?
I just ordered one to play with so great if it works, no big deal.
Looking for someone who has done it, or failed to do it on a v5 pi 🙂 Or if there is any reason why a v5 would not work?

[funman1steve]

I can say this DOES work. With a single V4 dongle it works GREAT. Draws just under 2 amps at 5V.
Running 64 bit RasPi 5 w/ 8GB RAM but a 4GB would work just fine as it only uses 1.5 GB of RAM.
Also unit is equipped with M.2 board for PCIe card and boots from it. No SD card needed at all now.

Monitoring single NBFM is where it will live its life up on a hill with solar panels and batteries. :)
I also tried it with a 10 channel P25 P1 system and also works excellent under that load as well.