Need help getting T3 to work.

[FECRwy]

Hi,
A while back I ran into some issues getting my T3 to work. That eventually got fixed. I'm now trying to build a second T3. I have downloaded the current version from GitHub and tried programming my Firebeetle both via the Arduino and Platformio IDEs. All I got, even with what appeared to be successful programming, was a screen that simply flashed on a regular basis. I then tried the online programmer and got the same results. I even tried erasing the flash before programming online and same result.

Here is the initial debug info from the online programmer:
esptool.js
Serial port WebSerial VendorID 0x1a86 ProductID 0x7522
Connecting...Debug: _connect_attempt default_reset false
Debug: Timeout
Debug: Sync
Debug: Sync err Error: Timeout
.Debug: Sync
Debug: Sync err Error: Timeout
.Debug: Sync
Debug: 1431642130

Debug: Chip Magic f01d83
Detecting chip type... ESP32
Debug: Read efuse 1073061900
Debug: Read efuse 1073061900
Debug: Read efuse 1073061908
Debug: Read efuse 1073061900
Chip is ESP32-D0WD-V3 (revision 3)
Debug: Read efuse 1073061900
Debug: Read efuse 1073061900
Debug: Read efuse 1073061904
Debug: Read efuse 1073061912
Features: Wi-Fi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
Debug: Read efuse 1073061892
Debug: Read efuse 1073061896
MAC: cc:7b:5c:bb:cf:18
Debug: Read efuse 1073061892
Debug: Read efuse 1073061896
Uploading stub...
Debug: mem_begin 3416 1 6144 400be000
Debug: check_command enter RAM download mode
Debug: check_command write to target RAM
Debug: mem_begin 156 1 6144 3ffdeba8
Debug: check_command enter RAM download mode
Debug: check_command write to target RAM
Running stub...
Debug: check_command leave RAM download mode
Stub running...
Changing baudrate to 921600
Debug: 0
Changed
Debug: Sync

And here is the debug info from programming:
Debug: EspLoader program
Debug: Data Length 4128768
Debug: Image Length 4128768
Debug: _update_image_flash_params keep undefined undefined
Debug: Image MD5 200d7756a68271065f223c0cf44a0aa9
Compressed 4128768 bytes to 1103224...
Debug: check_command enter compressed flash mode
Debug: Write loop 0 0 68
Writing at 0x0... (1%)
Debug: flash_defl_block 78 da
Debug: check_command write compressed data to flash after seq 0
Debug: Write loop 0 1 68
Writing at 0x12181... (2%)
Debug: flash_defl_block 44 8
Debug: check_command write compressed data to flash after seq 1
Debug: Write loop 0 2 68
Writing at 0x1d071... (4%)
Debug: flash_defl_block 7a 2b
Debug: check_command write compressed data to flash after seq 2
Debug: Write loop 0 3 68
Writing at 0x2789a... (5%)
Debug: flash_defl_block 1a f2
Debug: check_command write compressed data to flash after seq 3
Debug: Write loop 0 4 68
Writing at 0x2fc45... (7%)
Debug: flash_defl_block 25 29
Debug: check_command write compressed data to flash after seq 4
Debug: Write loop 0 5 68
Writing at 0x3d8b4... (8%)
Debug: flash_defl_block 36 1e
Debug: check_command write compressed data to flash after seq 5
Debug: Write loop 0 6 68
Writing at 0x51335... (10%)
Debug: flash_defl_block db 39
Debug: check_command write compressed data to flash after seq 6
Debug: Write loop 0 7 68
Writing at 0x57194... (11%)
Debug: flash_defl_block 4a 7c
Debug: check_command write compressed data to flash after seq 7
Debug: Write loop 0 8 68
Writing at 0x5d627... (13%)
Debug: flash_defl_block 73 ce
Debug: check_command write compressed data to flash after seq 8
Debug: Write loop 0 9 68
Writing at 0x63ba7... (14%)
Debug: flash_defl_block a3 d8
Debug: check_command write compressed data to flash after seq 9
Debug: Write loop 0 10 68
Writing at 0x6a612... (16%)
Debug: flash_defl_block 70 ae
Debug: check_command write compressed data to flash after seq 10
Debug: Write loop 0 11 68
Writing at 0x6fc36... (17%)
Debug: flash_defl_block 92 a
Debug: check_command write compressed data to flash after seq 11
Debug: Write loop 0 12 68
Writing at 0x7555d... (19%)
Debug: flash_defl_block 54 ee
Debug: check_command write compressed data to flash after seq 12
Debug: Write loop 0 13 68
Writing at 0x7b728... (20%)
Debug: flash_defl_block ab bb
Debug: check_command write compressed data to flash after seq 13
Debug: Write loop 0 14 68
Writing at 0x815b9... (22%)
Debug: flash_defl_block 79 a5
Debug: check_command write compressed data to flash after seq 14
Debug: Write loop 0 15 68
Writing at 0x8732c... (23%)
Debug: flash_defl_block 44 fa
Debug: check_command write compressed data to flash after seq 15
Debug: Write loop 0 16 68
Writing at 0x8d1d2... (25%)
Debug: flash_defl_block 89 f0
Debug: check_command write compressed data to flash after seq 16
Debug: Write loop 0 17 68
Writing at 0x92e05... (26%)
Debug: flash_defl_block 35 97
Debug: check_command write compressed data to flash after seq 17
Debug: Write loop 0 18 68
Writing at 0x9891b... (27%)
Debug: flash_defl_block 35 5a
Debug: check_command write compressed data to flash after seq 18
Debug: Write loop 0 19 68
Writing at 0x9dd1e... (29%)
Debug: flash_defl_block 25 77
Debug: check_command write compressed data to flash after seq 19
Debug: Write loop 0 20 68
Writing at 0xa310d... (30%)
Debug: flash_defl_block 54 3c
Debug: check_command write compressed data to flash after seq 20
Debug: Write loop 0 21 68
Writing at 0xa838a... (32%)
Debug: flash_defl_block 1f 24
Debug: check_command write compressed data to flash after seq 21
Debug: Write loop 0 22 68
Writing at 0xad7c4... (33%)
Debug: flash_defl_block 4b 95
Debug: check_command write compressed data to flash after seq 22
Debug: Write loop 0 23 68
Writing at 0xb2a71... (35%)
Debug: flash_defl_block b7 c1
Debug: check_command write compressed data to flash after seq 23
Debug: Write loop 0 24 68
Writing at 0xb7a96... (36%)
Debug: flash_defl_block e6 c9
Debug: check_command write compressed data to flash after seq 24
Debug: Write loop 0 25 68
Writing at 0xbcf87... (38%)
Debug: flash_defl_block 6b 54
Debug: check_command write compressed data to flash after seq 25
Debug: Write loop 0 26 68
Writing at 0xc21c3... (39%)
Debug: flash_defl_block 18 28
Debug: check_command write compressed data to flash after seq 26
Debug: Write loop 0 27 68
Writing at 0xc7540... (41%)
Debug: flash_defl_block ec 1d
Debug: check_command write compressed data to flash after seq 27
Debug: Write loop 0 28 68
Writing at 0xcd0b8... (42%)
Debug: flash_defl_block 6e 6a
Debug: check_command write compressed data to flash after seq 28
Debug: Write loop 0 29 68
Writing at 0xd28d1... (44%)
Debug: flash_defl_block 94 f4
Debug: check_command write compressed data to flash after seq 29
Debug: Write loop 0 30 68
Writing at 0xd7c60... (45%)
Debug: flash_defl_block 6e 42
Debug: check_command write compressed data to flash after seq 30
Debug: Write loop 0 31 68
Writing at 0xdcee5... (47%)
Debug: flash_defl_block fc 48
Debug: check_command write compressed data to flash after seq 31
Debug: Write loop 0 32 68
Writing at 0xe22ff... (48%)
Debug: flash_defl_block 73 28
Debug: check_command write compressed data to flash after seq 32
Debug: Write loop 0 33 68
Writing at 0xe7936... (50%)
Debug: flash_defl_block c6 43
Debug: check_command write compressed data to flash after seq 33
Debug: Write loop 0 34 68
Writing at 0xecfe1... (51%)
Debug: flash_defl_block ce 45
Debug: check_command write compressed data to flash after seq 34
Debug: Write loop 0 35 68
Writing at 0xf2767... (52%)
Debug: flash_defl_block 1d 26
Debug: check_command write compressed data to flash after seq 35
Debug: Write loop 0 36 68
Writing at 0xf870c... (54%)
Debug: flash_defl_block ed 47
Debug: check_command write compressed data to flash after seq 36
Debug: Write loop 0 37 68
Writing at 0xfe138... (55%)
Debug: flash_defl_block c2 c2
Debug: check_command write compressed data to flash after seq 37
Debug: Write loop 0 38 68
Writing at 0x104f37... (57%)
Debug: flash_defl_block 68 44
Debug: check_command write compressed data to flash after seq 38
Debug: Write loop 0 39 68
Writing at 0x10df44... (58%)
Debug: flash_defl_block d 3
Debug: check_command write compressed data to flash after seq 39
Debug: Write loop 0 40 68
Writing at 0x116ce2... (60%)
Debug: flash_defl_block f5 b0
Debug: check_command write compressed data to flash after seq 40
Debug: Write loop 0 41 68
Writing at 0x11c5fc... (61%)
Debug: flash_defl_block 40 38
Debug: check_command write compressed data to flash after seq 41
Debug: Write loop 0 42 68
Writing at 0x124039... (63%)
Debug: flash_defl_block 4a e2
Debug: check_command write compressed data to flash after seq 42
Debug: Write loop 0 43 68
Writing at 0x12b76f... (64%)
Debug: flash_defl_block 4c 4f
Debug: check_command write compressed data to flash after seq 43
Debug: Write loop 0 44 68
Writing at 0x13430c... (66%)
Debug: flash_defl_block 44 95
Debug: check_command write compressed data to flash after seq 44
Debug: Write loop 0 45 68
Writing at 0x13c238... (67%)
Debug: flash_defl_block e4 43
Debug: check_command write compressed data to flash after seq 45
Debug: Write loop 0 46 68
Writing at 0x1414a4... (69%)
Debug: flash_defl_block 3d a1
Debug: check_command write compressed data to flash after seq 46
Debug: Write loop 0 47 68
Writing at 0x149617... (70%)
Debug: flash_defl_block 42 e4
Debug: check_command write compressed data to flash after seq 47
Debug: Write loop 0 48 68
Writing at 0x14ee46... (72%)
Debug: flash_defl_block 92 b4
Debug: check_command write compressed data to flash after seq 48
Debug: Write loop 0 49 68
Writing at 0x15400d... (73%)
Debug: flash_defl_block dc 72
Debug: check_command write compressed data to flash after seq 49
Debug: Write loop 0 50 68
Writing at 0x1595c3... (75%)
Debug: flash_defl_block 7a eb
Debug: check_command write compressed data to flash after seq 50
Debug: Write loop 0 51 68
Writing at 0x2152bd... (76%)
Debug: flash_defl_block b 14
Debug: check_command write compressed data to flash after seq 51
Debug: Write loop 0 52 68
Writing at 0x231388... (77%)
Debug: flash_defl_block 1 2b
Debug: check_command write compressed data to flash after seq 52
Debug: Write loop 0 53 68
Writing at 0x245d0b... (79%)
Debug: flash_defl_block 6d a8
Debug: check_command write compressed data to flash after seq 53
Debug: Write loop 0 54 68
Writing at 0x2609af... (80%)
Debug: flash_defl_block 85 a6
Debug: check_command write compressed data to flash after seq 54
Debug: Write loop 0 55 68
Writing at 0x268b00... (82%)
Debug: flash_defl_block bf fd
Debug: check_command write compressed data to flash after seq 55
Debug: Write loop 0 56 68
Writing at 0x270e90... (83%)
Debug: flash_defl_block 8c d
Debug: check_command write compressed data to flash after seq 56
Debug: Write loop 0 57 68
Writing at 0x279559... (85%)
Debug: flash_defl_block 85 ba
Debug: check_command write compressed data to flash after seq 57
Debug: Write loop 0 58 68
Writing at 0x2816d2... (86%)
Debug: flash_defl_block ab 97
Debug: check_command write compressed data to flash after seq 58
Debug: Write loop 0 59 68
Writing at 0x289d25... (88%)
Debug: flash_defl_block 53 64
Debug: check_command write compressed data to flash after seq 59
Debug: Write loop 0 60 68
Writing at 0x2922c5... (89%)
Debug: flash_defl_block a6 59
Debug: check_command write compressed data to flash after seq 60
Debug: Write loop 0 61 68
Writing at 0x29a72d... (91%)
Debug: flash_defl_block 3e 4f
Debug: check_command write compressed data to flash after seq 61
Debug: Write loop 0 62 68
Writing at 0x2a2875... (92%)
Debug: flash_defl_block 88 ba
Debug: check_command write compressed data to flash after seq 62
Debug: Write loop 0 63 68
Writing at 0x2aaaf2... (94%)
Debug: flash_defl_block 43 c9
Debug: check_command write compressed data to flash after seq 63
Debug: Write loop 0 64 68
Writing at 0x2b2f7e... (95%)
Debug: flash_defl_block c1 a8
Debug: check_command write compressed data to flash after seq 64
Debug: Write loop 0 65 68
Writing at 0x2bb3ff... (97%)
Debug: flash_defl_block ce bf
Debug: check_command write compressed data to flash after seq 65
Debug: Write loop 0 66 68
Writing at 0x2c3887... (98%)
Debug: flash_defl_block 37 5a
Debug: check_command write compressed data to flash after seq 66
Debug: Write loop 0 67 68
Writing at 0x2cbd3e... (100%)
Debug: flash_defl_block 7e d5
Debug: check_command write compressed data to flash after seq 67
Wrote 4128768 bytes (1103224 compressed) at 0x0 in 30.754 seconds.
Debug: check_command calculate md5sum
Hash of data verified.
Leaving...
Debug: flash begin 0 0 16384 0 0
Debug: check_command enter Flash download mode
Debug: check_command leave compressed flash mode

Can anyone suggest what I am doing wrong or what I should try? All of the wiring has been checked over and the ribbon cable from the Firebeetle to the display is okay. I can't see any mistakes. I have also tried with another set(Firebeetle and display) and have the same result.

[alex-code]

Sounds like it's crashing and restarting.
Would you be able to see if you get any output from the Monitor option in PlatformIO?

[FECRwy]

Sorry for the delay, I had to go out.

Here is the Monitor Output for "Upload Filesystem Image":

• Executing task: C:\Users\test.platformio\penv\Scripts\platformio.exe run --target uploadfs --environment firebeetle2

Processing firebeetle2 (platform: espressif32@^5.3.0; board: firebeetle2; framework: arduino)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/firebeetle2.html
PLATFORM: Espressif 32 (5.4.0) > FireBeetle2-ESP32
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:

• framework-arduinoespressif32 @ 3.20006.221224 (2.0.6)
• tool-esptoolpy @ 1.40400.0 (4.4.0)
• tool-mkfatfs @ 2.0.1
• tool-mklittlefs @ 1.203.210628 (2.3)
• tool-mkspiffs @ 2.230.0 (2.30)
• toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
  LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
  LDF Modes: Finder ~ chain, Compatibility ~ soft
  Found 44 compatible libraries
  Scanning dependencies...
  Dependency Graph
  |-- SPI @ 2.0.0
  |-- TFT_eSPI @ 2.5.43
  |-- GT911 @ 0.2.1+sha.85875b2
  |-- Encoder @ 1.4.4+sha.c083e9c
  |-- DFRobot_LIS @ 1.0.1+sha.e5972df
  |-- ArduinoJson @ 6.21.5
  |-- StreamUtils @ 1.9.0+sha.f9a88c3
  |-- ESP Async WebServer @ 1.2.4+sha.7f37534
  |-- QRcodeDisplay @ 2.1.0
  |-- QRcode_eSPI @ 2.0.0+sha.c0c5827
  |-- UI
  |-- SD @ 2.0.0
  |-- AsyncTCP @ 1.1.1
  |-- SPIFFS @ 2.0.0
  |-- WiFi @ 2.0.0
  |-- DNSServer @ 2.0.0
  Building in release mode
  copy_gzip_data([".pio\build\firebeetle2\spiffs.bin"], ["data.gz"])
  Building FS image from 'data.gz' directory to .pio\build\firebeetle2\spiffs.bin
  /fonts/FreeSans-18.vlw
  /icons/battery-charging.bmp
  /icons/battery-full.bmp
  /icons/battery-low.bmp
  /icons/battery-medium.bmp
  /icons/battery-recharge.bmp
  /icons/conductor.bmp
  /icons/cs-connected.bmp
  /icons/cs-disconnected.bmp
  /icons/menu.bmp
  /icons/wifi-connected.bmp
  /icons/wifi-disconnected.bmp
  /www/bs.icons.svg.gz
  /www/bs.min.css.gz
  /www/fn.editor.css.gz
  /www/fn.editor.js.gz
  /www/functions.js.gz
  /www/groups.js.gz
  /www/icons.js.gz
  /www/index.html.gz
  /www/loading.gif
  /www/locos.js.gz
  /www/settings.js.gz
  /www/utils.js.gz
  /www/vue.global.js.gz
  /www/vue.global.prod.js.gz
  del_gzip_data([".pio\build\firebeetle2\spiffs.bin"], ["data.gz"])
  Looking for upload port...
  Auto-detected: COM7
  Uploading .pio\build\firebeetle2\spiffs.bin
  esptool.py v4.4
  Serial port COM7
  Connecting.............................
  Chip is ESP32-D0WD-V3 (revision v3.1)
  Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
  Crystal is 40MHz
  MAC: cc:7b:5c:bb:cf:18
  Uploading stub...
  Running stub...
  Stub running...
  Changing baud rate to 460800
  Changed.
  Configuring flash size...
  Flash will be erased from 0x00210000 to 0x003effff...
  Compressed 1966080 bytes to 290169...
  Writing at 0x00210000... (5 %)
  Writing at 0x00224cbd... (11 %)
  Writing at 0x00241a42... (16 %)
  Writing at 0x00249b6c... (22 %)
  Writing at 0x00252545... (27 %)
  Writing at 0x0025aae5... (33 %)
  Writing at 0x00262ed6... (38 %)
  Writing at 0x0026b144... (44 %)
  Writing at 0x002734d1... (50 %)
  Writing at 0x0027b954... (55 %)
  Writing at 0x00283ce0... (61 %)
  Writing at 0x0028c25f... (66 %)
  Writing at 0x002944f3... (72 %)
  Writing at 0x0029c9a9... (77 %)
  Writing at 0x002a4e1b... (83 %)
  Writing at 0x002ad1ac... (88 %)
  Writing at 0x002b52f8... (94 %)
  Writing at 0x002bd623... (100 %)
  Wrote 1966080 bytes (290169 compressed) at 0x00210000 in 12.1 seconds (effective 1302.2 kbit/s)...
  Hash of data verified.

Leaving...
Hard resetting via RTS pin...
========================================================================================= [SUCCESS] Took 30.28 seconds ========================================================================================= * Terminal will be reused by tasks, press any key to close it.

Next, I tried the "Upload and Monitor" option which showed an error in YELLOW. Unfortunately it immediately wipes the monitor window and displays the following:

Rebooting...
ets Jul 29 2019 12:21:46

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13104
load:0x40080400,len:3036
entry 0x400805e4
[ 202][E][esp32-hal-cpu.c:110] addApbChangeCallback(): duplicate func=0x40104738 arg=0x3ffbde68
Guru Meditation Error: Core 1 panic'ed (StoreProhibited). Exception was unhandled.

Core 1 register dump:
PC : 0x400e9ed3 PS : 0x00060830 A0 : 0x80105201 A1 : 0x3ffb27d0
A2 : 0x3ffc4800 A3 : 0x3ffc585c A4 : 0x3ffc4e00 A5 : 0x00000055
A6 : 0x3ffb8874 A7 : 0x80000001 A8 : 0x800e9ed1 A9 : 0x3ffb27b0
A10 : 0x00000000 A11 : 0x00000000 A12 : 0x00000033 A13 : 0x0000005d
A14 : 0x00061a80 A15 : 0x3ffc5024 SAR : 0x0000001c EXCCAUSE: 0x0000001d
EXCVADDR: 0x00000015 LBEG : 0x40089eb4 LEND : 0x40089eca LCOUNT : 0xffffffff

Backtrace: 0x400e9ed0:0x3ffb27d0 0x401051fe:0x3ffb2820

#0 0x400e9ed0:0x3ffb27d0 in setup() at src/main.cpp:313
#1 0x401051fe:0x3ffb2820 in loopTask(void*) at C:/Users/test/.platformio/packages/[email protected]/cores/esp32/main.cpp:42

ELF file SHA256: 80edf4ba47f3ce3e

Rebooting...
ets Jul 29 2019 12:21:46

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13104
load:0x40080400,len:3036
entry 0x400805e4
[ 201][E][esp32-hal-cpu.c:110] addApbChangeCallback(): duplicate func=0x40104738 arg=0x3ffbde68
Guru Meditation Error: Core 1 panic'ed (StoreProhibited). Exception was unhandled.

Core 1 register dump:
PC : 0x400e9ed3 PS : 0x00060830 A0 : 0x80105201 A1 : 0x3ffb27d0
A2 : 0x3ffc4800 A3 : 0x3ffc585c A4 : 0x3ffc4e00 A5 : 0x00000055
A6 : 0x3ffb8874 A7 : 0x80000001 A8 : 0x800e9ed1 A9 : 0x3ffb27b0
A10 : 0x00000000 A11 : 0x00000000 A12 : 0x00000033 A13 : 0x0000005d
A14 : 0x00061a80 A15 : 0x3ffc5024 SAR : 0x0000001c EXCCAUSE: 0x0000001d
EXCVADDR: 0x00000015 LBEG : 0x40089eb4 LEND : 0x40089eca LCOUNT : 0xffffffff

Backtrace: 0x400e9ed0:0x3ffb27d0 0x401051fe:0x3ffb2820

#0 0x400e9ed0:0x3ffb27d0 in setup() at src/main.cpp:313
#1 0x401051fe:0x3ffb2820 in loopTask(void*) at C:/Users/test/.platformio/packages/[email protected]/cores/esp32/main.cpp:42

ELF file SHA256: 80edf4ba47f3ce3e

This just repeats over and over. I did not catch the error message but I will try again.

[FECRwy]

I was able to capture a snippet of the output. Here it is:

• Executing task: C:\Users\test.platformio\penv\Scripts\platformio.exe run --target upload --target monitor --environment firebeetle2

Processing firebeetle2 (platform: espressif32@^5.3.0; board: firebeetle2; framework: arduino)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/firebeetle2.html
PLATFORM: Espressif 32 (5.4.0) > FireBeetle2-ESP32
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:

• framework-arduinoespressif32 @ 3.20006.221224 (2.0.6)
• tool-esptoolpy @ 1.40400.0 (4.4.0)
• tool-mkfatfs @ 2.0.1
• tool-mklittlefs @ 1.203.210628 (2.3)
• tool-mkspiffs @ 2.230.0 (2.30)
• toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
  LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
  LDF Modes: Finder ~ chain, Compatibility ~ soft
  Found 44 compatible libraries
  Scanning dependencies...
  Dependency Graph
  |-- SPI @ 2.0.0
  |-- TFT_eSPI @ 2.5.43
  |-- GT911 @ 0.2.1+sha.85875b2
  |-- Encoder @ 1.4.4+sha.c083e9c
  |-- DFRobot_LIS @ 1.0.1+sha.e5972df
  |-- ArduinoJson @ 6.21.5
  |-- StreamUtils @ 1.9.0+sha.f9a88c3
  |-- ESP Async WebServer @ 1.2.4+sha.67de9cd
  |-- QRcodeDisplay @ 2.1.0
  |-- QRcode_eSPI @ 2.0.0+sha.c0c5827
  |-- UI
  |-- SD @ 2.0.0
  |-- AsyncTCP @ 1.1.1
  |-- SPIFFS @ 2.0.0
  |-- WiFi @ 2.0.0
  |-- DNSServer @ 2.0.0
  Building in release mode
  Compiling .pio\build\firebeetle2\src\DCCExCS.cpp.o
  Compiling .pio\build\firebeetle2\src\LocoByNameUI.cpp.o
  Compiling .pio\build\firebeetle2\src\LocoUI.cpp.o
  Compiling .pio\build\firebeetle2\src\Locos.cpp.o
  Compiling .pio\build\firebeetle2\src\MenuUI.cpp.o
  Compiling .pio\build\firebeetle2\src\ProgramUI.cpp.o
  Compiling .pio\build\firebeetle2\src\Settings.cpp.o
  Compiling .pio\build\firebeetle2\src\SettingsUI.cpp.o
  Compiling .pio\build\firebeetle2\src\ThrottleServer.cpp.o
  Compiling .pio\build\firebeetle2\src\UIHeader.cpp.o
  Compiling .pio\build\firebeetle2\src\WiFiUI.cpp.o
  Compiling .pio\build\firebeetle2\src\main.cpp.o
  Building .pio\build\firebeetle2\bootloader.bin
  esptool.py v4.4
  Creating esp32 image...
  Merged 1 ELF section
  Successfully created esp32 image.
  Generating partitions .pio\build\firebeetle2\partitions.bin
  Compiling .pio\build\firebeetle2\lib8ea\SPI\SPI.cpp.o
  Compiling .pio\build\firebeetle2\libdae\FS\FS.cpp.o
  Archiving .pio\build\firebeetle2\lib8ea\libSPI.a
  Compiling .pio\build\firebeetle2\libdae\FS\vfs_api.cpp.o
  Compiling .pio\build\firebeetle2\libee6\SPIFFS\SPIFFS.cpp.o
  Compiling .pio\build\firebeetle2\libdea\LittleFS\LittleFS.cpp.o
  Archiving .pio\build\firebeetle2\libdae\libFS.a
  Compiling .pio\build\firebeetle2\lib6b4\TFT_eSPI\TFT_eSPI.cpp.o
  Compiling .pio\build\firebeetle2\lib94a\Wire\Wire.cpp.o
  Archiving .pio\build\firebeetle2\libee6\libSPIFFS.a
  Compiling .pio\build\firebeetle2\lib1f1\GT911\GT911.cpp.o
  Archiving .pio\build\firebeetle2\libdea\libLittleFS.a
  Compiling .pio\build\firebeetle2\lib3e2\Encoder\Encoder.cpp.o
  Archiving .pio\build\firebeetle2\lib94a\libWire.a
  Compiling .pio\build\firebeetle2\lib938\DFRobot_LIS\DFRobot_LIS.cpp.o
  Archiving .pio\build\firebeetle2\lib1f1\libGT911.a
  Compiling .pio\build\firebeetle2\lib938\DFRobot_LIS\DFRobot_LIS2DH12.cpp.o
  Archiving .pio\build\firebeetle2\lib3e2\libEncoder.a
  Compiling .pio\build\firebeetle2\lib938\DFRobot_LIS\DFRobot_LIS2DW12.cpp.o
  Archiving .pio\build\firebeetle2\lib6b4\libTFT_eSPI.a
  Compiling .pio\build\firebeetle2\lib91a\EEPROM\EEPROM.cpp.o
  Compiling .pio\build\firebeetle2\lib32b\AsyncTCP\AsyncTCP.cpp.o
  Compiling .pio\build\firebeetle2\libebc\WiFi\WiFi.cpp.o
  Archiving .pio\build\firebeetle2\lib938\libDFRobot_LIS.a
  Compiling .pio\build\firebeetle2\libebc\WiFi\WiFiAP.cpp.o
  Archiving .pio\build\firebeetle2\lib91a\libEEPROM.a
  Compiling .pio\build\firebeetle2\libebc\WiFi\WiFiClient.cpp.o
  Archiving .pio\build\firebeetle2\lib32b\libAsyncTCP.a
  Compiling .pio\build\firebeetle2\libebc\WiFi\WiFiGeneric.cpp.o
  Compiling .pio\build\firebeetle2\libebc\WiFi\WiFiMulti.cpp.o
  Compiling .pio\build\firebeetle2\libebc\WiFi\WiFiSTA.cpp.o
  Compiling .pio\build\firebeetle2\libebc\WiFi\WiFiScan.cpp.o
  Compiling .pio\build\firebeetle2\libebc\WiFi\WiFiServer.cpp.o
  Compiling .pio\build\firebeetle2\libebc\WiFi\WiFiUdp.cpp.o
  Compiling .pio\build\firebeetle2\liba5c\ESP Async WebServer\AsyncEventSource.cpp.o
  Compiling .pio\build\firebeetle2\liba5c\ESP Async WebServer\AsyncWebSocket.cpp.o
  Compiling .pio\build\firebeetle2\liba5c\ESP Async WebServer\SPIFFSEditor.cpp.o
  Archiving .pio\build\firebeetle2\libebc\libWiFi.a
  Compiling .pio\build\firebeetle2\liba5c\ESP Async WebServer\WebAuthentication.cpp.o
  Compiling .pio\build\firebeetle2\liba5c\ESP Async WebServer\WebHandlers.cpp.o
  Compiling .pio\build\firebeetle2\liba5c\ESP Async WebServer\WebRequest.cpp.o
  Compiling .pio\build\firebeetle2\liba5c\ESP Async WebServer\WebResponses.cpp.o
  Compiling .pio\build\firebeetle2\liba5c\ESP Async WebServer\WebServer.cpp.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\frame-v1.c.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\frame-v10.c.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\frame-v2.c.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\frame-v3.c.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\frame-v4.c.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\frame-v5.c.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\frame-v6.c.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\frame-v7.c.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\frame-v8.c.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\frame-v9.c.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\qrcodedisplay.cpp.o
  Compiling .pio\build\firebeetle2\lib38d\QRcodeDisplay\qrencode.c.o
  Compiling .pio\build\firebeetle2\lib24f\QRcode_eSPI\qrcode_espi.cpp.o
  Compiling .pio\build\firebeetle2\libcc9\SD\SD.cpp.o
  In file included from .pio/libdeps/firebeetle2/QRcodeDisplay/src/qrcodedisplay.cpp:3:
  .pio/libdeps/firebeetle2/QRcodeDisplay/src/qrencode.h:5: warning: "pgm_read_word" redefined
  #define pgm_read_word(x) *x

In file included from C:/Users/test/.platformio/packages/[email protected]/cores/esp32/WString.h:29,
from C:/Users/test/.platformio/packages/[email protected]/cores/esp32/Arduino.h:166,
from .pio/libdeps/firebeetle2/QRcodeDisplay/src/qrcodedisplay.cpp:1:
C:/Users/test/.platformio/packages/[email protected]/cores/esp32/pgmspace.h:39: note: this is the location of the previous definition
#define pgm_read_word(addr) ({ \

Archiving .pio\build\firebeetle2\lib38d\libQRcodeDisplay.a
In file included from .pio/libdeps/firebeetle2/QRcode_eSPI/src/qrcode_espi.cpp:2:
.pio/libdeps/firebeetle2/QRcodeDisplay/src/qrencode.h:5: warning: "pgm_read_word" redefined
#define pgm_read_word(x) *x

In file included from C:/Users/test/.platformio/packages/[email protected]/cores/esp32/WString.h:29,
from C:/Users/test/.platformio/packages/[email protected]/cores/esp32/Arduino.h:166,
from .pio/libdeps/firebeetle2/QRcode_eSPI/src/qrcode_espi.cpp:1:
C:/Users/test/.platformio/packages/[email protected]/cores/esp32/pgmspace.h:39: note: this is the location of the previous definition
#define pgm_read_word(addr) ({ \

Compiling .pio\build\firebeetle2\libcc9\SD\sd_diskio.cpp.o
Archiving .pio\build\firebeetle2\lib24f\libQRcode_eSPI.a
Archiving .pio\build\firebeetle2\liba5c\libESP Async WebServer.a
Compiling .pio\build\firebeetle2\libcc9\SD\sd_diskio_crc.c.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Children\Keyboard.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Children\Keypad.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Children\MessageBox.cpp.o
Archiving .pio\build\firebeetle2\libcc9\libSD.a
Compiling .pio\build\firebeetle2\lib1e0\UI\Children\Pin.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Component.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Components\Paging.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Element.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Elements\Button.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Elements\Header.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Elements\Image.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Elements\Input.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Elements\Label.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Events.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Img\BMP.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Img\ImgHandler.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\Touch.cpp.o
Compiling .pio\build\firebeetle2\lib1e0\UI\UI.cpp.o
Compiling .pio\build\firebeetle2\libe5f\DNSServer\DNSServer.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\Esp.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\FirmwareMSC.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\FunctionalInterrupt.cpp.o
Archiving .pio\build\firebeetle2\lib1e0\libUI.a
Compiling .pio\build\firebeetle2\FrameworkArduino\HWCDC.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\HardwareSerial.cpp.o
Archiving .pio\build\firebeetle2\libe5f\libDNSServer.a
Compiling .pio\build\firebeetle2\FrameworkArduino\IPAddress.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\IPv6Address.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\MD5Builder.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\Print.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\Stream.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\StreamString.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\Tone.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\USB.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\USBCDC.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\USBMSC.cpp.o
Compiling .pio\build\firebeetle2\FrameworkArduino\WMath.cpp.o

I couldn't capture more as the window wiped the output too quickly.

[alex-code]

There can be some warnings but this shouldn't affect anything.

This looks like the same issue you had here #119
Were you able to get that working?

[alex-code]

Phew! I was running out of ideas 😂
The bit that's failing is trying to read the touchscreen config but it's not an error I've ever had.

I wonder if that's had a revision.
Do you have a link to where you bought that?

[FECRwy]

I bought the first and latest(Oct/24) display from DigiKey Canada just like the Firebeetle. Here is the link: https://www.digikey.ca/en/products/detail/dfrobot/DFR0669/13280137?so=88823445&content=productdetail_CA&mkt_tok=MDI4LVNYSy01MDcAAAGVsIqCnG5B8YlpV4__y9tV8xmqcr-_vn2wsnIuleZXdTfjoeKg9atJEhVPg-HgZob08TQn3FEpyTASJifUMFxtgiR6JpEdKRuxGp5yGtuh

I had also bought one (Second) from RobotShop back in August 2024, The web site had this one mislabeled DFR0920 but with the correct manufacturer's code of DFR0669. Both behaved the same. Here's the link: https://ca.robotshop.com/products/dfrobot-35-in-480x320-tft-lcd-capacitive-touchscreen

[alex-code]

Will see if I can find docs on the touch chip but it's tricky to test without hardware that has the issue.

But after commenting out those lines it's all working as expected?
If it's working you can remove that debug flag from platformio.ini too.

[FECRwy]

Working as expected. Will fully test it out later. I'll remove the debug flag.

Thanks for sticking to this problem. I do appreciate all of your work. Have recommended the T3 to others and have a couple of guys who want me to build one for them.

[alex-code]

Thanks for working with me too, hopefully I'll figure out what's causing the issue and get it sorted.