Skip to content

Beam wallet protocol API v6.0

Jump to bottom
chapati edited this page Jun 24, 2021 · 29 revisions

API Error codes

List of the possible error codes (with messages):

  • -32600 InvalidJsonRpc ("Invalid JSON-RPC.")
  • -32601 NotFoundJsonRpc ("Procedure not found.")
  • -32602 InvalidParamsJsonRpc ("Invalid parameters.")
  • -32603 InternalErrorJsonRpc ("Internal JSON-RPC error.")
  • -32001 InvalidTxStatus ("Invalid TX status.")
  • -32002 UnknownApiKey ("Unknown API key.")
  • -32003 InvalidAddress ("Invalid address.")
  • -32004 InvalidTxId ("Invalid transaction ID.")
  • -32005 NotSupported ("Feature is not supported")
  • -32006 InvalidPaymentProof ("Invalid payment proof provided")
  • -32007 PaymentProofExportError ("Cannot export payment proof")
  • -32008 SwapFailToParseToken ("Invalid swap token.")
  • -32009 SwapFailToAcceptOwn ("Can't accept own swap offer.")
  • -32010 SwapNotEnoughtBeams ("Not enought beams.")
  • -32011 SwapFailToConnect ("Doesn't have active connection.")
  • -32012 DatabaseError ("Database error")
  • -32013 DatabaseNotFound ("Database not found")
  • -32014 ThrottleError ("Requests limit exceeded")
  • -32015 NotOpenedError ("Wallet not opened")
  • -32016 NoSwapsError ("Swaps are not enabled")
  • -32017 UnexpectedError ("Unexpected call")
  • -32018 ContractCompileError ("Failed to compile contract")
  • -32019 ContractError ("Contract call failed")
  • -32020 NotAllowedError ("Call is not allowed")
  • -32021 UserRejected ("Call is rejected by user")

API Methods

API has the following methods:

SWAP API Methods

If you build wallet-api with BEAM_ATOMIC_SWAP_SUPPORT then you can use additional SWAP API methods.

create_address

Creates new receiver regular address with given comment and expiration.

-->

{
    "jsonrpc" : "2.0", 
    "id" : 1,
    "method" : "create_address", 
    "params" :
    {
        "type": "regular",
        "expiration" : "auto",
        "comment" : "John Smith",
        "new_style_regular" : true
    }
}

  • type the type of address, possible values are

    • regular - regular old-style address, default
    • offline - address offline transaction using Lelantus MW shielded pool, could be used more than once, there are no guaranties for extended privacy
    • max_privacy - address for guarantied maximum privacy transaction. Could be used only once.
    • public_offline - address for donation, could be used as many times as you wish
    • regular_new - since v6.0, regular new-style address (base58), this address has SBBS internally

    Details of address types are described in this document. Since v6.0, UI gives the sender an opportunity to choose between regular and offline send operation and the default address type provided via the "receive" UI dialog is an offline address with offline_payments=1

  • expiration

    • before v6.0 can be expired/never/24h.
    • since v6.0 can be expired/never/24h/auto.

    Optional, by default address expires in 24 hours. auto expiration means that address expires in 61 days (roughly 2 months). auto addresses are renewed for another 2 months when any transaction is received with this address.

  • comment - any string, optional.

  • new_style_regular - if this flag is true new style base58 address will be returned otherwise hexadecimal string will be returned, this option is ignored for the types different regular. type=regular + new_style_regular=true = type=regular_new.

  • offline_payments - number of offline payments embedded into an offline address, default value is 10. Valid only for the type=offline.

All these address types could be passed as address parameter of the send method and/or used with the cli/UI. --enable_lelantus should be used in the command line of the wallet-api to enable sending/receiving using offline, max_privacy and public_offline transactions.

<--

{
    "jsonrpc" : "2.0", 
    "id" : 1,
    "result" : "472e17b0419055ffee3b3813b98ae671579b0ac0dcd6f1a23b11a75ab148cc67"
}

validate_address

Just a simple validations, checks if the address isn't garbage and belongs to our elliptic curve. Also returns is_mine == true if address is found in the local wallet DB.

-->

{
    "jsonrpc":"2.0", 
    "id": 1,
    "method": "validate_address", 
    "params":
    {
        "address" : "472e17b0419055ffee3b3813b98ae671579b0ac0dcd6f1a23b11a75ab148cc67"
    }
}

<--

{
    "jsonrpc":"2.0", 
    "id": 1,
    "result" : 
    {
        "is_valid" : true,
        "is_mine" : false,
        "type": "offline", 
        "payments": 3
    }
}

  • type since v6.0, the type of address, possible values are

    • regular - regular old-style address, default
    • offline
    • max_privacy
    • public_offline
    • regular_new (base58)

  • payments the number of payments left in case of offline

addr_list

Get all the addresses in the wallet. -->

{
    "jsonrpc":"2.0", 
    "id": 8,
    "method":"addr_list",
    "params":
    {
        "own" : true
    }
}
  • own, optional bool. Set to true to get only own addresses. By default is false.

<--

{
    "id": 8,
    "jsonrpc": "2.0",
    "result":
    [{
        "address": "29510b33fac0cb20695fd3b836d835451e600c4224d8fb335dc1a68271deb9b6b5b",
        "category": "",
        "create_time": 1553174321,
        "duration": 1520,
        "expired": true,
        "comment": "",
        "own": true,
        "own_id": 16730903,
        "own_id_str": "16730903",
        "identity": "2d8738b0424ad50631e902fab655e7e1795fbb8d92d47c4c8df7336870fcadf5"
    }] 
}
  • own_id unsigned 64 bit index used to generate given address
  • own_id_str string representation of index used to generate given address (for JavaScript)
  • identity identity linked to the given address.

Identity

Starting from version 4.2 we introduce an additional entity in order to make transfer more reliable. It is called identity. The main goal of identity is to proof and ensure that transaction performs between claimed participants also it could be done using untrusted 3rd parties. The main scenario is hardware wallet when host machine could be compromised, since it has ability to generate SBBS addresses, it can sign payment proof or accept transaction without need to ask hardware wallet about any secret, but if we give our identity to the other side (in addition to SBBS address), and this identity can be generated using hardware wallet only, then only hardware wallet can sign or approve transaction.

delete_address

Delete specific address from the wallet.

-->

{
    "jsonrpc":"2.0", 
    "id": 8,
    "method":"delete_address",
    "params":
    {
        "address" : "29510b33fac0cb20695fd3b836d835451e600c4224d8fb335dc1a68271deb9b6b5b"
    }
}

<--

{
    "id": 8,
    "jsonrpc": "2.0",
    "result": "done"
}

edit_address

Edit specific address. You can change the comment and/or expiration. Consult create_address for more details on acceptable values.

-->

{
    "jsonrpc":"2.0", 
    "id": 8,
    "method":"edit_address",
    "params":
    {
        "address" : "29510b33fac0cb20695fd3b836d835451e600c4224d8fb335dc1a68271deb9b6b5b",
        "comment" : "John Smith",
        "expiration" : "expired"
    }
}

<--

{
    "id": 8,
    "jsonrpc": "2.0",
    "result": "done"
}

tx_send

Send BEAM or asset to a given address.

-->

{
    "jsonrpc":"2.0", 
    "id": 2,
    "method":"tx_send", 
    "params":
    {
        "value": 12342342,
        "fee": 2,
        "from": "472e17b0419055ffee3b3813b98ae671579b0ac0dcd6f1a23b11a75ab148cc67",
        "address": "472e17b0419055ffee3b3813b98ae671579b0ac0dcd6f1a23b11a75ab148cc67",
        "comment": "thank you!",
        "asset_id": 1,
        "offline": false
    }
}
  • value how much BEAM or asset to send in groth or asset groth.
  • fee always in BEAM groth, optional. Omit for default fee.
  • from own address, optional. If omitted new own address is generated and registered.
  • address receiver's SBBS address or token. Token is an extension of SBBS address. It is a base58 encoded byte buffer which contains serialized parameters of a transaction. At least it contains SBBS address and identity.
  • comment transaction comment, optional.
  • txId optional, you can provide your own transaction ID.
  • asset_id asset id to send, optional. Present starting from v5.0 and can be used only after Fork 2. Omit or set to 0 for BEAM transaction.
  • offline - since v6.0 offline addresses by default start the regular online transaction. Specify "offline":true" to start an offline transaction. Applied only for offline addresses and ignored for all other address types.

You can preselect specific UTXOs for a transaction and fee via optional coins array parameter like "coins" : ["00057e8eca5673476e6f726d000000000000015d3ef79800", "00057e8eca1233476e6f726d000000000000015d3ef79800"]. In case of asset transaction you can specify both asset coins (to send) and non-asset coins (to pay fee).

<--

{
    "jsonrpc":"2.0", 
    "id": 2,
    "result":
    {
        "txId" : "10c4b760c842433cb58339a0fafef3db"
    }
}

Returns transaction id or error code.

tx_split

Creates a specific set of outputs with given values.

NOTE: The session parameter is not IMPLEMENTED and was removed!

-->

{
    "jsonrpc":"2.0", 
    "id": 5,
    "method":"tx_split", 
    "params":
    {
        "coins" : [11, 12, 13, 50000000],
        "fee" : 100,
        "asset_id": 1
    }
}

<--

{
    "jsonrpc":"2.0", 
    "id": 5,
    "result":
    {
        "txId" : "10c4b760c842433cb58339a0fafef3db"
    }
}
  • fee is always in BEAM groth. Omit for default fee.
  • coins amounts of coins your want to have after split.
  • txId optional, provide your own transaction ID.
  • asset_id asset id to split, optional. Omit or set to 0 to split BEAM coins. Present starting from v5.0 and can be used only after Fork 2.

tx_asset_issue

Available from v5.0, can be used after Fork2.

Mints new asset coins. You must own the asset and info about the asset should be in a local database. Use tx_asset_info to retrieve the latest asset info if necessary. Asset minting is free. You need to pay only regular transaction fee.

-->

{
    "jsonrpc": "2.0", 
    "id": 2,
    "method": "tx_asset_issue", 
    "params":
    {
        "value": 6,
        "asset_id": 1
    }
}
  • value how much asset to mint, in asset groth.
  • fee transaction fee in BEAM groth. Omit to use default fee.
  • asset_id asset id of the asset to mint.
  • txId optional, provide your own transaction ID.
  • asset_meta obsolete and removed in v6.0.

You can preselect specific BEAM UTXOs for a transaction fee by adding coins array parameter, like "coins" : ["00057e8eca5673476e6f726d000000000000015d3ef79800", "00057e8eca1233476e6f726d000000000000015d3ef79800"]

<--

{
    "jsonrpc": "2.0", 
    "id": 2,
    "result":
    {
        "txId" : "10c4b760c842433cb58339a0fafef3db"
    }
}

Returns transaction id or error code.

tx_asset_consume

Available from v5.0 and can be used after Fork2.

Burns existing asset coins. You must own the asset itself as well as asset coins to burn them. You cannot burn asset coins that belong to another wallet. Info about the asset should be in a local database. Use tx_asset_info to retrieve the latest asset info if necessary. Asset coins burning is absolutely free. You need to pay only regular transaction fee.

-->

{
    "jsonrpc":"2.0", 
    "id": 2,
    "method":"tx_asset_consume", 
    "params":
    {
        "value": 6,
        "asset_id": 1
    }
}
  • value how much asset to burn, in asset groth.
  • fee transaction fee in BEAM groth, omit for a default fee.
  • asset_id id of the asset to consume.
  • txId optional, provide your own transaction ID
  • asset_meta obsolete and removed since v6.0

You can preselect specific UTXOs to burn and to pay fee by adding coins array parameter, like "coins" : ["00057e8eca5673476e6f726d000000000000015d3ef79800", "00057e8eca1233476e6f726d000000000000015d3ef79800"]. Both asset coins (to burn) and BEAM coins (to pay fee) can be in this array.

<--

{
    "jsonrpc":"2.0", 
    "id": 2,
    "result":
    {
        "txId" : "10c4b760c842433cb58339a0fafef3db"
    }
}

Returns transaction id or error code.

tx_asset_info

Available from v5.0 and can be used after Fork2.

Retrieve full info about any registered asset and save in a local database. If asset has been unregistered or has been never registered transaction would fail. After transaction is completed you can use get_asset_info to read/get asset info from the local database.

-->

{
    "jsonrpc":"2.0", 
    "id": 2,
    "method": "tx_asset_info",
    "params": 
    {
        "asset_id": 1
    }
}
  • asset_id asset id to retrieve info about. Can be used for any asset even if you don't own it.
  • txId optional, provide your own transaction ID
  • asset_meta obsolete and removed since v6.0

Asset info transaction is free, i.e. doesn't incur any fees.

<--

{
    "jsonrpc":"2.0", 
    "id": 2,
    "result":
    {
        "txId" : "10c4b760c842433cb58339a0fafef3db"
    }
}

Returns transaction id or error code.

tx_cancel

Cancels running transaction

-->

{
    "jsonrpc":"2.0", 
    "id": 4,
    "method":"tx_cancel", 
    "params":
    {
        "txId" : "a13525181c0d45b0a4c5c1a697c8a7b8"
    }
}
  • txId transaction id to cancel.

<--

{
    "jsonrpc":"2.0", 
    "id": 4,
    "result": true
}

Returns true if successfully canceled or error code with the reason.

tx_delete

Removes transaction from the local history. Cannot remove running transaction

-->

{
    "jsonrpc":"2.0", 
    "id": 4,
    "method":"tx_delete", 
    "params":
    {
        "txId" : "a13525181c0d45b0a4c5c1a697c8a7b8"
    }
}
  • txId transaction id to be deleted.

<--

{
    "jsonrpc":"2.0", 
    "id": 4,
    "result": true
}

Returns true if the transaction was successfully deleted or error code with the reason.

tx_status

Get status & extended information about a single transaction by its transaction id. The example below is given for a simple transaction. Different transaction types have different status records. Consult tx_list method description for details.

-->

{
    "jsonrpc":"2.0", 
    "id": 4,
    "method":"tx_status", 
    "params":
    {
        "txId" : "10c4b760c842433cb58339a0fafef3db" 
    }
}

<--

{
    "jsonrpc":"2.0", 
    "id": 4,
    "result":
    { 
        "txId" : "10c4b760c842433cb58339a0fafef3db",
        "asset_id": 0,
        "comment": "",
        "fee": 100,
        "kernel": "0000000000000000000000000000000000000000000000000000000000000000",
        "receiver": "472e17b0419055ffee3b3813b98ae671579b0ac0dcd6f1a23b11a75ab148cc67",
        "sender": "f287176bdd517e9c277778e4c012bf6a3e687dd614fc552a1ed22a3fee7d94f2",
        "status": 4,
        "status_string" : "Failed",
        "tx_type": 0,
        "tx_type_string": "simple",
        "failure_reason" : "No inputs",
        "value": 12342342,
        "create_time" : 1551100217,
        "income" : false,
        "sender_identity": "a0a1ebbfeed5c312b309e32715c159e6b4548a6c6c3af25d0dbc16f37a1e9dd6",
        "receiver_identity": "2d8738b0424ad50631e902fab655e7e1795fbb8d92d47c4c8df7336870fcadf5",
        "token": "44pE7ySjZYjbLqwnTJANvr4BudMk1RdvWvaZnBvoCTwFnigfaTSza75bvw7x2GCa377Z4CSRRYZon44Ss9G9joSicNRAgts4u3pL6yV6jDQ6gAVJD9Scyr"
    } 
}

tx_list

Get the transactions list.

-->

{
    "jsonrpc":"2.0", 
    "id": 8,
    "method":"tx_list",
    "params":
    {
        "filter" : 
        {
            "status":4,
            "height":1055,
        },
        "skip" : 0,
        "count" : 10
    }
}
  • filter.status optional, filter transactions by status
  • filter.height optional, filter transactions by height. For simple, asset issue and asset consume transactions denotes height when the transaction was registered in the chain. For asset info transaction means height at which asset confirmation was received. Works only for transactions with status Completed(3).
  • count optional, number of transactions to get. By default, all transactions are returned.
  • skip number of transactions to skip, 0 by default.

If assets are not enabled, the method returns only BEAM transactions. To get asset transactions you should enable assets.

  • filter.asset_id return only asset transactions with given asset id. Present starting from v5.0. Assets should be enabled.

<--

{
    "jsonrpc":"2.0", 
    "id": 8,
    "result":
    [{ 
        "asset_id": 0,
        "txId" : "10c4b760c842433cb58339a0fafef3db",
        "comment": "",
        "fee": 0,
        "kernel": "0000000000000000000000000000000000000000000000000000000000000000",
        "receiver": "472e17b0419055ffee3b3813b98ae671579b0ac0dcd6f1a23b11a75ab148cc67",
        "sender": "f287176bdd517e9c277778e4c012bf6a3e687dd614fc552a1ed22a3fee7d94f2",
        "status": 4,
        "status_string" : "Failed",
        "failure_reason" : "No inputs",
        "value": 12342342,
        "create_time" : 1551100217,
        "income" : false,
        "token": "44pE7ySjZYjbLqwnTJANvr4BudMk1RdvWvaZnBvoCTwFnigfaTSza75bvw7x2GCa377Z4CSRRYZon44Ss9G9joSicNRAgts4u3pL6yV6jDQ6gAVJD9Scyr"
    },
    {
      "asset_id": 1,
      "asset_meta": "STD:N=Coin;SN=CN;UN=Cgro;NTHUN=Cgroth",
      "comment": "",
      "confirmations": 102,
      "create_time": 1586995332,
      "fee": 0,
      "height": 1908,
      "income": false,
      "receiver": "0",
      "sender": "0",
      "status": 3,
      "status_string": "asset confirmed",
      "txId": "d9f94306127a4ef894733f984b5512cf",
      "tx_type": 6,
      "tx_type_string": "asset info",
      "value": 0
    },
    {
        "asset_id": 1,
        "asset_meta": "STD:N=Coin;SN=CN;UN=Cgro;NTHUN=Cgroth",
        "comment": "",
        "confirmations": 1985,
        "height": 25,
        "create_time": 1586966478,
        "fee": 100,
        "income": false,
        "kernel": "1c9e4a9a61df1dda00db10ab4477f88355e13d4ed06c0db36c39b22a2a66f642",
        "receiver": "0",
        "sender": "0",
        "status": 3,
        "status_string": "asset issued",
        "txId": "77008a76aa4b4da697587040b2d21f1e",
        "tx_type": 2,
        "tx_type_string": "asset issue",
        "value": 500000000
    }]
}
  • token retuned only in case if the transaction was started with a token.
  • height and confirmations will be absent if the transaction isn't in the chain for simple, asset issue & asset consume transactions, or if asset confirmation is not received for asset info transaction.
  • confirmations the number of blocks which confirm the presence of the transaction.
  • sender_identity and receiver_identity are present if both participants provided these.
  • status_string is a string representation of status parameter.
  • asset_meta is an asset metadata string. Present from v5.0.
  • tx_type is present starting from v5.0.
  • tx_type_string is a string representation of tx_type parameter. Present starting from v5.0.
  • asset_id is returned starting from v5.0. For BEAM transactions it is always 0, for transactions that involve assets (including send/receive) it is an asset id. Can be 0 for asset info transaction if the transaction was started with asset_meta and the asset has been not found.
  • asset_meta is an asset metadata string. Returned starting from v5.0. Always present for asset issue & consume transactions. Can be empty for asset info transaction if it was started with asset_id and the asset has been not found.
  • kernel is not returned for asset info transactions. These transactions do not have any kernel and only query node for information.

IMPORTANT: The recommended number of confirmations for Beam transfers is 80 blocks.

TX statuses

  • pending (0) - pending initial state, the transaction is created, but not sent yet
  • in progress (1) - self sending/waiting for sender/waiting for receiver. For simple transactions indicates that the sender or receiver should come online to initiate the transaction. For asset issue/consume/info transactions indicates that transaction is being assembled. For asset info transaction means waiting for node response.
  • canceled (2) - cancelled by sender or due to rollback
  • completed (3) - transaction is completed/received/sent/asset issued/asset consumed/asset confirmed
  • failed (4) - failed for some reason or expired
  • registering (5) - self sending/receiving/sending transaction is taken care by the blockchain, miners needs to PoW and to add it to a block, then block should be added to the blockchain.

TX types

  • simple (0) - simple transaction, send/receive BEAM or asset
  • reserved (1) - currently not returned
  • asset issue (2) - issue new asset units
  • asset consume (3) - consume asset units
  • reserved (4) - currently not returned
  • reserved (5) - currently not returned
  • asset info (6) - asset info transaction, receive full asset information from blockchain
  • push transaction (7) - lelantus push transaction, is used for offline/max privacy payments
  • contract (12) - starting with v6.0, transaction created by contract request, or to fund or execute node-base contract invocation

N.B. tx_list does not return swap, asset register & asset unregister transactions. Transactions are sorted by height in a descending order.

wallet_status

Get current wallet status.

-->

{
	"jsonrpc":"2.0", 
	"id": 6,
	"method":"wallet_status"
}

<--

{
	"jsonrpc":"2.0", 
	"id": 6,
	"result":
	{
	    "current_height" : 1055,
	    "current_state_hash" : "f287176bdd517e9c277778e4c012bf6a3e687dd614fc552a1ed22a3fee7d94f2",
	    "prev_state_hash" : "bd39333a66a8b7cb3804b5978d42312c841dbfa03a1c31fc2f0627eeed6e43f2",
	    "available": 100500,
	    "receiving": 123,
	    "sending": 0,
	    "maturing": 50,
	    "locked": 30,
	    "difficulty": 2.93914,
	}
}
  • available sum of available UTXOs you can spend
  • sending/receiving sum of UTXOs currently sending/receiving
  • maturing sum of UTXOs currently maturing
  • locked not used at the moment, ignore
  • difficulty the latest blockchain PoW difficulty

Starting from v5.0 assets support has been added. This slightly changes API response: totals array is added which provides amounts for each assets including BEAM (asset id 0). To get the totals array assets should be enabled.

-->

{
	"jsonrpc":"2.0", 
	"id": 6,
	"method":"wallet_status"
}

<--

{
  "id": 1236,
  "jsonrpc": "2.0",
  "result": {
    "current_height" : 1055,
    "current_state_hash" : "f287176bdd517e9c277778e4c012bf6a3e687dd614fc552a1ed22a3fee7d94f2",
    "prev_state_hash" : "bd39333a66a8b7cb3804b5978d42312c841dbfa03a1c31fc2f0627eeed6e43f2",
    "available": 100500,
    "receiving": 123,
    "sending": 0,
    "maturing": 50,
    "difficulty": 2.93914,
    "totals": [
      {
        "asset_id": 0,
        "available": 100500,
        "available_str": "100500",
        "maturing": 50,
        "maturing_str": "50",
        "receiving": 123,
        "receiving_str": "123",
        "sending": 0,
        "sending_str": "0"
      },
      {
        "asset_id": 1,
        "available": 2000000000,
        "available_str": "2000000000",
        "maturing": 0,
        "maturing_str": "0",
        "receiving": 0,
        "receiving_str": "0",
        "sending": 0,
        "sending_str": "0"
      }
    ]
  }
}
  • totals is an array of totals per asset.
  • asset_id denotes asset type. For BEAM asset_id is always 0.
  • Maximum asset emission is 2128-1. To ensure compatibility with JavaScript raw number (available, maturing &c.) returned only if it is less than or equal to Number.MAX_SAFE_INTEGER (253-1). If total's value is greater than Number.MAX_SAFE_INTEGER only corresponding string representation (xxxx_str) is returned.

get_utxo

Get list of all unlocked UTXOs.

-->

{
    "jsonrpc":"2.0", 
    "id": 6,
    "method":"get_utxo",
    "params" :
    {
        "count": 10,
        "skip": 0,
        "sort": {
            "field": "amount",
            "direction": "asc"
        }
    }
}
  • count number of UTXO to get, by default all the UTXOs are returned.
  • skip number of UTXO to skip, default is 0.
  • sort.field name of field to sort. Available values are "id|asset_id|amount|type|maturity|createTxId|spentTxId|status|status_string"
  • sort.direction sorting directions "asc" or "desc"

<--

{
    "jsonrpc": "2.0", 
    "id": 6,
    "result":
    [{
        "id": 123,
        "asset_id": 0,
        "amount": 12345,
        "maturity": 60,
        "type": "mine",
        "createTxId": "10c4b760c842433cb58339a0fafef3db",
        "spentTxId": "",
        "status": 2,
        "status_string": "maturing"
    }]
}
  • asset_id asset id if coin belongs to an asset and 0 for BEAM coins. By default method returns only BEAM coins. To get asset coins assets should be enabled.
  • filter.asset_id return only asset coins with given asset id, 0 for BEAM coins. Present starting from v5.0. Assets should be enabled.

-->

{
    "jsonrpc": "2.0",
    "id": 1236,
    "method": "get_utxo",
    "params": {
        "assets": true,
        "filter": {
            "asset_id": 1
        }
    }
}

<--

{
  "id": 1236,
  "jsonrpc": "2.0",
  "result": [
    {
      "amount": 500000000,
      "asset_id": 1,
      "createTxId": "fd705ce6f8c345309c865dc93de9fec5",
      "id": "0000000183ed2de4d94e6bd56e6f726d01000000000000001dcd6500",
      "maturity": 19,
      "spentTxId": "",
      "status": 1,
      "status_string": "available",
      "type": "norm"
    }
  ]
}
  • type can be fees, mine, norm, chng
  • status can be unavailable (0), available (1), maturing (2), outgoing (3), incoming (4), spent (6), consumed (7). consumed status is returned only for asset coins starting from v5.0. It means that the coin has been burned (consumed).

get_asset_info

Read asset info from local database. Asset info can be refreshed using tx_asset_info. It is also automatically refreshed during asset transactions (but not always) to ensure that asset operations are safe.

-->

{
    "jsonrpc":"2.0", 
    "id": 6,
    "method": "get_asset_info",
    "params" :
    {
        "asset_id": 1
    }
}
  • asset_id asset id to retrieve info about. Can be used for any asset even if you don't own it.
  • asset_meta obsolete and removed since v6.0

<--

{
    "id": 1236,
    "jsonrpc": "2.0",
    "result": 
    {
        "asset_id": 1,
        "emission": 2000000000,
        "emission_str": "2000000000",
        "isOwned": 1,
        "lockHeight": 39,
        "metadata": "STD:N=NAME;SN=SNM;UN=UNIT;NTHUN=NTHUNIT",
        "ownerId": "0ae08a49e018e98177774294107dc033790b87538e54a20e99c6b98f1dbd39ce",
        "refreshHeight": 927
    }
}

Returns full asset info or error code.

  • asset_id asset id
  • metadata asset metadata
  • emission & emission_str total asset emission. Maximum asset emission is 2128-1. To ensure compatibility with JavaScript raw number returned only if it is less than or equal to Number.MAX_SAFE_INTEGER (253-1). If asset emission is greater than Number.MAX_SAFE_INTEGER only corresponding string representation is returned.
  • isOwned is 1 if you own this asset
  • lockHeight last block when asset emission turned to/from 0.
  • refreshHeight block at which asset information has been received. Please note, that all returned fields are valid only for this and previous blocks. In next blocks emission might change, asset become unregistered &c. Use tx_asset_info to retrieve the most recent info.

generate_tx_id

Generates ID for a transaction.

-->

{
    "jsonrpc":"2.0", 
    "id": 2,
    "method":"generate_tx_id"
}

<--

{
    "jsonrpc":"2.0", 
    "id": 2,
    "result":"10c4b760c842433cb58339a0fafef3db"
}

export_payment_proof

Exports payment proof for given txId.

-->

{
    "jsonrpc":"2.0", 
    "id": 4,
    "method": "export_payment_proof", 
    "params":
    {
        "txId" : "a13525181c0d45b0a4c5c1a697c8a7b8"
    }
}

<--

{
    "jsonrpc":"2.0", 
    "id": 4,
    "result": 
    {
        "payment_proof": "8009f28991ef543253c8b6a2caf15cf99e23fb9c2b4ca30dc463c8ceb354d7979e80ef7d4255dd5e885200648abe5826d8e0ba0157d3e8cf9c42dcc8258b036986e50400371789ee82afc25ee29c9c57bcb1018b725a3a94c0ceb1fa7984ea13de4982553e0d78d925a362982182a971e654857b8e407e7ad2e9cb72b2b8228812f8ec50435351000c94e2c85996e9527d9b0c90a1843205a7ec8f99fa534083e5f1d055d9f53894"
    }
}
  • payment_proof is a hex-encoded byte buffer which contains information about sender, receiver, amount and kernel, signed with receiver's private key. This info could be unpacked and verified using verify_payment_proof method by the third party. Receiver creates a payment proof in order give receiver an ability to proof that actual payment was made. Sender does not sign transaction if receiver does not provide him this evidence.

N.B. Payment proofs for asset transaction are supported starting from v5.0. These proofs cannot be verified by earlier clients/APIs versions. Regular BEAM payment proofs generated by the latest clients/APIs still would be accepted by earlier versions of clients/APIs.

verify_payment_proof

Verifies payment_proof.

-->

{
    "jsonrpc":"2.0", 
    "id": 4,
    "method":"verify_payment_proof", 
    "params":
    {
        "payment_proof" : "8009f28991ef543253c8b6a2caf15cf99e23fb9c2b4ca30dc463c8ceb354d7979e80ef7d4255dd5e885200648abe5826d8e0ba0157d3e8cf9c42dcc8258b036986e50400371789ee82afc25ee29c9c57bcb1018b725a3a94c0ceb1fa7984ea13de4982553e0d78d925a362982182a971e654857b8e407e7ad2e9cb72b2b8228812f8ec50435351000c94e2c85996e9527d9b0c90a1843205a7ec8f99fa534083e5f1d055d9f53894"
    }
}

<--

{
    "jsonrpc":"2.0", 
    "id": 4,
    "result": 
    {
        "is_valid": true,
        "asset_id": 0,
        "sender":   "9f28991ef543253c8b6a2caf15cf99e23fb9c2b4ca30dc463c8ceb354d7979e",
        "receiver": "ef7d4255dd5e885200648abe5826d8e0ba0157d3e8cf9c42dcc8258b036986e5",
        "amount":   2300000000,
        "kernel":   "ee82afc25ee29c9c57bcb1018b725a3a94c0ceb1fa7984ea13de4982553e0d78"
    }
}
  • is_valid true if signature is valid,
  • sender sender's SBBS address
  • receiver is a receiver's SBBS address, is it is used to verify the signature
  • amount amount sent by the transaction in groth
  • asset_id asset id of the transaction, 0 for BEAM. Returned starting from v5.0
  • kernel id of the kernel of this transaction

N.B. v5.0+ APIs accept proofs generated by older versions.

invoke_contract

Available from v6.0, can be used after Fork3.

Invokes application shader. Only application/wallet side shaders are accepted. Use CLI to call a contract shader.

-->

{
    "jsonrpc": "2.0", 
    "id": 2,
    "method": "invoke_contract", 
    "params":
    {
        "contract": [123, 123, 123],
        "args": "role=manager,action=view"
    }
}

OR

-->

{
    "jsonrpc": "2.0", 
    "id": 2,
    "method": "invoke_contract", 
    "params":
    {
        "contract_file": "....",
        "args": "role=manager,action=view"
    }
}
  • contract contract code as raw bytes array, optional.
  • contract_file file name to read contract code from, optional. Absolute or relative to the executable CWD.
  • args contract arguments, optional. Depends on the called shader. Consult shader-specific docs for details.
  • create_tx bool, pass true create transaction automatically if contract wants it and return txid. Pass false to avoid transaction creation, get raw tx data that can be passed to process_invoke_data later. By default is true.

contract parameter always takes precedence over the contract_file.

<--

{
  "id": 1236,
  "jsonrpc": "2.0",
  "result": {
    "output": "{\"contracts\": [{\"cid\": \"2b105519ee7e170d92abffbc1eb5426d4e20910af2f54bcee43eb84c74dcfa4b\",\"Height\": 27004},{\"cid\": 
               \"55df189ac5c1f9b982fa34fb8050f005c331203023816ddbb2d641a96a3fcb2a\",\"Height\": 27001},{\"cid\": 
               \"6add645863c29d9dc43ab9987af870cb91fd0dfb4e26ae09ca97ac8ff5372f6e\",\"Height\": 532}]}"
  }
}
  • output contract output. Depends on the called shader. Can be empty
  • txid transaction created by contract (if any)
  • raw_data raw data returned by the contract based on which transaction can be created using process_invoke_data

Async Notice

invoke_contract method is asynchronous in nature and can take up to several blocks to execute (depends on shader). Please setup your API connection correspondingly (keep alive HTTP or use socket).

Shader Errors

Please notice that API returns errors only if there is an API error (no shader code, parse error &c.). If there was an error inside the shader itself API call would be successful and shader output should be checked. For example:

Code caching

If there was an invoke_shader before contract/contract_file can be omitted. In this case contract code from previous call would be used. In case of wallet_api code caching works on per-connection level. In case of applications caching works on per-application level.

-->

{
    "jsonrpc": "2.0",
    "id": 1236,
    "method": "invoke_contract",
    "params": {
        "contract_file": "./faucetManager.wasm",
        "args": "role=manager"
    }
}

<--

{
  "id": 1236,
  "jsonrpc": "2.0",
  "result": {
    "output": "{\"error\": \"Action not specified\"}"
  }
}

process_invoke_data

Creates transaction requested by a contract

-->

{
    "jsonrpc": "2.0",
    "id": 1236,
    "method": "process_invoke_data",
    "params": {
        "data": [123, 123, 123]
    }
}

<--

{
  "id": 1236,
  "jsonrpc": "2.0",
  "result": {
    "txid": "..."
  }
}
  • txid contract transaction id created as a result of the call

calc_change

Calculates change for given amount

-->

{
    "jsonrpc":"2.0", 
    "id": 4,
    "method":"calc_change", 
    "params":
    {
        "amount" : 1234,
        "asset_id": 2,
        "fee": 10000,
        "is_push_transaction": true
    }
}

<--

{
    "jsonrpc":"2.0", 
    "id": 4,
    "result":
    {
        "asset_change": 12,
        "asset_change_str": "12",
        "change": 12,
        "change_str": "12",
        "explicit_fee": 1100000,
        "explicit_fee_str": "1100000"
    }
}

where

  • amount is a requested amount we are going to send
  • asset_id asset id of the requested amount
  • fee explicit fee in GROTHs chosen by the user
  • asset_change change amount for requested asset_id
  • change change in for BEAM. asset_change and change are equal if asset_id == 0, i.e. BEAM
  • explicit_fee the fee which should be used
  • is_push_transaction true if we are going to push transaction output into the shielded pool.

block_details

Returns block header from blockchain

-->

{
    "jsonrpc": "2.0", 
    "id": 2,
    "method": "block_details", 
    "params":
    {
        "height": 200
    }
}
  • height height of block.

<--

{
    "jsonrpc":"2.0", 
    "id": 4,
    "result":
    {
        "block_hash": "7aec20e5b56706d57a4dca1df4a4d3104dbdbf8d6005499845558b7a32694d02",
        "chainwork": "000000000000000000000000000000000000000000000000000000c503b09ac0",
        "definition": "0d3f4e63743760c6397d76086e1cc0ebe749c121206c8150738dc84edcd30092",
        "difficulty": 118.4594497680664,
        "height": 200,
        "kernels": "705cdfa154eec35e4b4b0e2163ff9c81f8f035641ee4b0b95c3f3c5b0f170ffe",
        "packed_difficulty": 114939514,
        "pow": "00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000004f04638c1f4cee1b7ad6d906",
        "previous_block": "d195cc69fbd2b402cc33ecb303f5391f0010f34ee059f30b908ed10f0fe5a255",
        "rules_hash": "340bbeabc390f481df1f84aedf0b679c1c7ed1f0e28d4340c9c49b4c41611f85",
        "timestamp": 1619598150
    }
}
  • block_hash is a block hash
  • chainwork is a chainwork
  • definition is a definition
  • difficulty is a difficulty
  • height is a block height
  • kernels is a kernels
  • packed_difficulty is a packed difficulty
  • pow is a pow
  • previous_block is hash of previous block
  • rules_hash is a rules hash
  • timestamp is a timestamp

Async Notice

block_details method is asynchronous in nature. Please setup your API connection correspondingly (keep alive HTTP or use socket).

Home

API

IPFS

Clone this wiki locally