From c0ae6f4b72a19d6837d82980e63b1dcede78d96a Mon Sep 17 00:00:00 2001 From: Quentin Date: Thu, 19 Oct 2023 22:03:24 +0200 Subject: [PATCH] typo --- _includes/splinky_preparation.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/_includes/splinky_preparation.md b/_includes/splinky_preparation.md index 6f79430..cdb86be 100644 --- a/_includes/splinky_preparation.md +++ b/_includes/splinky_preparation.md @@ -9,7 +9,7 @@ In this section we will prepare the Splinky. The Splinky is an open-source board We will install it onto a **shield PCB** (also called **MCU holder**), as well as some reset button and audio jacks. {: .tip } -In your kit, you might get either an Elite-C, or a Splinky/RP2040-compatible board. Newer kits ship with the Splinky, but if you have an old you might have an Elite-C. The installation instructions are the same for both of them, just look carefully at the pictures. +In your kit, you might get either an Elite-C, or a Splinky/RP2040-compatible board. Newer kits ship with the Splinky, but if you have an old kit you might have an Elite-C. The installation instructions are the same for both of them, just look carefully at the pictures. **Please read all the instructions first, and then follow them carefully using the pictures.**