diff --git a/libraries/AP_Scripting/drivers/UltraMotion.lua b/libraries/AP_Scripting/drivers/UltraMotion.lua
new file mode 100644
index 0000000000000..b9d309109f0fe
--- /dev/null
+++ b/libraries/AP_Scripting/drivers/UltraMotion.lua
@@ -0,0 +1,195 @@
+--[[
+   driver for UltraMotion servos
+   https://www.ultramotion.com/
+   based on an earlier driver by Fred Darnell
+--]]
+
+local PARAM_TABLE_KEY = 89
+local PARAM_TABLE_PREFIX = "UM_"
+
+local MAV_SEVERITY = {EMERGENCY=0, ALERT=1, CRITICAL=2, ERROR=3, WARNING=4, NOTICE=5, INFO=6, DEBUG=7}
+
+-- add a parameter and bind it to a variable
+local function bind_add_param(name, idx, default_value)
+    assert(param:add_param(PARAM_TABLE_KEY, idx, name, default_value), string.format('could not add param %s', name))
+    return Parameter(PARAM_TABLE_PREFIX .. name)
+end
+
+-- setup script specific parameters
+assert(param:add_table(PARAM_TABLE_KEY, PARAM_TABLE_PREFIX, 8), 'could not add param table')
+
+--[[
+  // @Param: UM_SERVO_MASK
+  // @DisplayName: Mask of UltraMotion servos
+  // @Description: Mask of UltraMotion servos
+  // @Bitmask: 0:SERVO1,1:SERVO2,2:SERVO3,3:SERVO4,4:SERVO5,5:SERVO6,6:SERVO7,7:SERVO8,8:SERVO9,9:SERVO10,10:SERVO11,11:SERVO12
+  // @User: Standard
+--]]
+UM_SERVO_MASK = bind_add_param("SERVO_MASK", 1, 0)
+
+--[[
+  // @Param: UM_RATE_HZ
+  // @DisplayName: Update rate for UltraMotion servos
+  // @Description: Update rate for UltraMotion servos
+  // @Units: Hz
+  // @Range: 1 400
+  // @User: Standard
+--]]
+UM_RATE_HZ = bind_add_param("RATE_HZ", 2, 70)
+
+--[[
+  // @Param: UM_TORQUE_MAX
+  // @DisplayName: Maximum torque to command
+  // @Description: Maximum torque to command
+  // @Units: %
+  // @Range: 1 100
+  // @User: Standard
+--]]
+UM_TORQUE_MAX = bind_add_param("TORQUE_MAX", 3, 30.5) -- default matches datasheet
+
+--[[
+  // @Param: UM_OPTIONS
+  // @DisplayName: Optional settings
+  // @Description: Optional settings
+  // @Bitmask: 0:LogAllFrames,1:ParseTelemetry
+  // @User: Standard
+--]]
+UM_OPTIONS = bind_add_param("OPTIONS", 4, 0)
+
+--[[
+  // @Param: UM_TELEM_TXID
+  // @DisplayName: Telemetry ID
+  // @Description: Telemetry ID
+  // @User: Standard
+--]]
+UM_TELEM_TXID = bind_add_param("TELEM_TXID", 5, 0)
+
+local OPTION_LOGALLFRAMES = 0x01
+local OPTION_PARSETELEM = 0x02
+
+if UM_SERVO_MASK:get() == 0 then
+   gcs:send_text(MAV_SEVERITY.INFO, "UltraMotion UM_SERVO_MASK is empty")
+   return
+end
+
+-- Load CAN driver, using the scripting protocol
+-- use a buffer size of 25
+local driver = CAN:get_device(25)
+if not driver then
+   gcs:send_text(MAV_SEVERITY.INFO, "UltraMotion: init failed")
+   return
+end
+
+local frame_count = 0
+
+-- marker for extended frame format
+local CAN_FLAG_EFF = uint32_t(1)<<31
+
+--[[
+   frame logging - can be replayed with Tools/scripts/CAN/CAN_playback.py
+--]]
+local function log_can_frame(frame)
+   logger:write("CANF",'Id,DLC,FC,B0,B1,B2,B3,B4,B5,B6,B7','IBIBBBBBBBB',
+                frame:id(),
+                frame:dlc(),
+                frame_count,
+                frame:data(0), frame:data(1), frame:data(2), frame:data(3),
+                frame:data(4), frame:data(5), frame:data(6), frame:data(7))
+   frame_count = frame_count + 1
+end
+
+--[[
+   create a new actuator object
+--]]
+function Actuator(unitID)
+    local o = {}
+    o.unitID = unitID or 0
+    -- pre-fill the msg ID to avoid expensive uint32_t operations at runtime
+    o.msg = CANFrame()
+    o.msg:id(CAN_FLAG_EFF | uint32_t(unitID))
+    o.msg:dlc(4)
+    return o
+end
+
+--[[
+   put a 16 bit little endian value
+--]]
+local function put_uint16(msg, ofs, value)
+   msg:data(ofs, value & 0xFF)
+   msg:data(ofs+1, value >> 8)
+end
+
+--[[
+   use the UM_SERVO_MASK to create a table of actuators
+   need to restart scripting to change the UM_SERVO_MASK
+--]]
+local actuators = {}
+for i = 1, 32 do
+   local mask = 1 << (i-1)
+   if UM_SERVO_MASK:get() & mask ~= 0 then
+      actuators[i] = Actuator(i)
+   end
+end
+
+--[[
+   send outputs to all servos
+--]]
+local function send_outputs()
+   local noutputs = #actuators
+   local torque_max = math.floor(UM_TORQUE_MAX:get() * 32767.0 * 0.01)
+   for i = 1, noutputs do
+      local pwm = SRV_Channels:get_output_pwm_chan(actuators[i].unitID)
+      local msg = actuators[i].msg
+
+      put_uint16(msg, 0, pwm)
+      put_uint16(msg, 2, torque_max)
+
+      driver:write_frame(msg, 10000)
+   end
+end
+
+--[[
+   parse one telemetry frame. The telemetry data format depends on
+   the txData parameter set in the servos
+
+   This code assumes txData is pABCDEFS
+--]]
+local function parse_telemetry(frame)
+   local bytes = ""
+   local dlc = frame:dlc()
+   for i = 1, dlc do
+      bytes = bytes .. string.char(frame:data(i-1))
+   end
+   local unitid, status, current, pos = string.unpack("<BiHB", bytes)
+   logger:write("UMSV",'Id,Status,Curr,Pos','Biff', unitid, status, current, pos)
+end
+
+--[[
+   read any incoming CAN frames
+--]]
+local function read_frames()
+   for _ = 1,30 do
+      local frame = driver:read_frame()
+      if not frame then
+         return
+      end
+      if UM_OPTIONS:get() & OPTION_LOGALLFRAMES ~= 0 then
+         log_can_frame(frame)
+      end
+      if UM_OPTIONS:get() & OPTION_PARSETELEM ~= 0 then
+         if frame:id_signed() == UM_TELEM_TXID:get() then
+            parse_telemetry(frame)
+         end
+      end
+   end
+end
+
+function update()
+   send_outputs()
+   read_frames()
+   return update, 1000/UM_RATE_HZ:get()
+end
+
+gcs:send_text(MAV_SEVERITY.INFO, string.format("Loaded UltraMotion with %u actuators", #actuators))
+
+return update, 100