diff --git a/vendor/AnkerMakeCE.ini b/vendor/AnkerMakeCE.ini
index 2090f46..4807bc4 100644
--- a/vendor/AnkerMakeCE.ini
+++ b/vendor/AnkerMakeCE.ini
@@ -21,20 +21,20 @@ technology = FFF
 family = AnkerMake CE
 bed_model = M5-CE-bed.stl
 bed_texture = M5-CE-texture.svg
-default_materials = Generic PLA @ANKER-CE; Generic PLA+ @ANKER-CE; Generic PETG @ANKER-CE; Generic ABS @ANKER-CE; 
+thumbnail = M5-CE_thumbnail.png
+default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER; 
 
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
 
 # Common print preset
-
 [print:*common*]
 avoid_crossing_perimeters = 0
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 2500
 bridge_angle = 0
 bridge_flow_ratio = 1
-bridge_speed = 200
+bridge_speed = 150
 brim_separation = 0.1
 brim_type = no_brim
 brim_width = 3
@@ -46,15 +46,15 @@ elefant_foot_compensation = 0.2
 enable_dynamic_overhang_speeds = 1
 ensure_vertical_shell_thickness = 1
 external_perimeter_acceleration = 2500
-external_perimeter_extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.42
 external_perimeter_speed = 150
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 30
 extruder_clearance_radius = 45
-extrusion_width = 0.45
+extrusion_width = 0.44
 fill_angle = 45
-fill_density = 15%
+fill_density = 10%
 fill_pattern = cubic
 first_layer_acceleration = 2500
 first_layer_acceleration_over_raft = 2500
@@ -67,11 +67,11 @@ gap_fill_speed = 150
 gcode_comments = 0
 gcode_label_objects = 1
 infill_acceleration = 2500
-infill_anchor = 2
+infill_anchor = 2.5
 infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.45
+infill_extrusion_width = 0.44
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 10%
@@ -84,42 +84,42 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.15
 max_print_speed = 500
-max_volumetric_extrusion_rate_slope_negative = 5
-max_volumetric_extrusion_rate_slope_positive = 5
+max_volumetric_extrusion_rate_slope_negative = 2
+max_volumetric_extrusion_rate_slope_positive = 2
 max_volumetric_speed = 15
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{layer_height}mm_{printing_filament_types}_{printer_model}.gcode
-overhang_speed_0 = 150
-overhang_speed_1 = 175
-overhang_speed_2 = 200
-overhang_speed_3 = 225
+overhang_speed_0 = 100
+overhang_speed_1 = 115
+overhang_speed_2 = 130
+overhang_speed_3 = 150
 overhangs = 1
 perimeter_acceleration = 2500
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
+perimeter_extrusion_width = 0.44
 perimeter_generator = arachne
 perimeter_speed = 250
-perimeters = 2
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_contact_distance = 0.2
 raft_first_layer_density = 80%
-raft_layers = 0
+raft_layers = 0.01
 resolution = 0
 seam_position = aligned
 single_extruder_multi_material_priming = 0
-skirt_distance = 2
+skirt_distance = 3
 skirt_height = 1
-skirts = 3
+skirts = 2
 small_perimeter_speed = 150
 solid_infill_acceleration = 2500
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.44
 solid_infill_speed = 250
 spiral_vase = 0
 standby_temperature_delta = -5
@@ -130,7 +130,7 @@ support_material_buildplate_only = 0
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
-support_material_extrusion_width = 0.35
+support_material_extrusion_width = 0.36
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
@@ -138,7 +138,7 @@ support_material_interface_spacing = 0.2
 support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
-support_material_speed = 200
+support_material_speed = 150
 support_material_style = snug
 support_material_synchronize_layers = 0
 support_material_threshold = 50
@@ -147,14 +147,14 @@ support_material_xy_spacing = 60%
 thick_bridges = 0
 thin_walls = 1
 top_fill_pattern = monotoniclines
-top_infill_extrusion_width = 0.45
+top_infill_extrusion_width = 0.4
 top_solid_infill_acceleration = 2500
 top_solid_infill_speed = 150
 top_solid_min_thickness = 0.7
-travel_acceleration = 1250
-travel_speed = 400
-travel_speed_z = 12
-wipe_tower = 1
+travel_acceleration = 2500
+travel_speed = 250
+travel_speed_z = 20
+wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
@@ -166,11 +166,10 @@ xy_size_compensation = 0
 inherits = *common*
 bottom_solid_layers = 10
 bridge_flow_ratio = 0.6
-first_layer_height = 0.20
+first_layer_height = 0.10
 layer_height = 0.05
-perimeters = 3
-raft_contact_distance = 0.15
-support_material_contact_distance = 0.15
+raft_contact_distance = 0.05
+support_material_contact_distance = 0.05
 support_material_spacing = 1.5
 thick_bridges = 1
 top_solid_layers = 14
@@ -181,188 +180,106 @@ bottom_solid_layers = 7
 bridge_flow_ratio = 0.85
 first_layer_height = 0.15
 layer_height = 0.10
-top_solid_layers = 8
-support_material_contact_distance = 0.17
-raft_contact_distance = 0.15
+raft_contact_distance = 0.10
+top_solid_layers = 9
+support_material_contact_distance = 0.10
 
 [print:*0.15mm*]
 inherits = *common*
 bottom_solid_layers = 5
-bridge_flow_ratio = 1
+bridge_flow_ratio = 0.90
 first_layer_height = 0.20
 layer_height = 0.15
-top_infill_extrusion_width = 0.4
+raft_contact_distance = 0.15
 top_solid_layers = 6
+support_material_contact_distance = 0.15
 
 [print:*0.20mm*]
 inherits = *common*
 bottom_solid_layers = 4
 bridge_flow_ratio = 0.95
 first_layer_height = 0.25
-layer_height = 0.2
-top_infill_extrusion_width = 0.4
+layer_height = 0.20
+raft_contact_distance = 0.20
 top_solid_layers = 5
+support_material_contact_distance = 0.20
 
 [print:*0.25mm*]
 inherits = *common*
 bottom_solid_layers = 3
 first_layer_height = 0.30
 layer_height = 0.25
-top_solid_layers = 4
+raft_contact_distance = 0.25
+top_solid_layers = 3
+support_material_contact_distance = 0.25
 
 [print:*0.30mm*]
 inherits = *common*
 bottom_solid_layers = 2
-bridge_flow_ratio = 0.95
 first_layer_height = 0.30
 layer_height = 0.3
+raft_contact_distance = 0.3
 top_infill_extrusion_width = 0.4
 top_solid_layers = 3
 support_material_contact_distance = 0.3
 
 [print:*speed*]
+bottom_solid_min_thickness = 0
 bridge_acceleration = 4000
-bridge_speed = 400
 default_acceleration = 5000
-external_perimeter_acceleration = 3000
-external_perimeter_speed = 250
-fill_density = 10%
+external_perimeter_acceleration = 4000
 fill_pattern = supportcubic
 first_layer_acceleration = 2500
 first_layer_acceleration_over_raft = 2500
-gap_fill_speed = 300
-infill_acceleration = 5000
-infill_speed = 500
-overhang_speed_0 = 250
-overhang_speed_1 = 300
-overhang_speed_2 = 350
-overhang_speed_3 = 400
-perimeter_acceleration = 5000
-perimeter_speed = 500
-seam_position = nearest
-small_perimeter_speed = 250
+infill_acceleration = 4000
+infill_speed = 350
+perimeters = 2
+perimeter_acceleration = 3500
 solid_infill_acceleration = 4000
-solid_infill_speed = 300
-support_material_interface_speed = 100%
-support_material_speed = 400
-top_solid_infill_acceleration = 3000
-top_solid_infill_speed = 350
-top_solid_min_thickness = 0.5
+support_material_interface_speed = 80%
+top_solid_infill_acceleration = 2500
+top_solid_infill_speed = 200
+top_solid_min_thickness = 0
+travel_acceleration = 4000
 travel_speed = 500
-travel_speed_z = 50
 
 
 [print:0.05mm ULTRADETAIL @ANKER-CE]
 inherits = *0.05mm*
-bridge_flow_ratio = 0.6
 compatible_printers_condition = printer_model=~/(M5-CE).*/ and nozzle_diameter[0]==0.4
-external_perimeter_extrusion_width = 0.4
-first_layer_extrusion_width = 0.45
-gcode_resolution = 0.006
-infill_extrusion_width = 0.4
-perimeter_extrusion_width = 0.4
-perimeters = 3
-raft_contact_distance = 0.1
-solid_infill_extrusion_width = 0.4
-support_material_contact_distance = 0.1
-support_material_interface_layers = 0
-support_material_spacing = 1.5
-thick_bridges = 1
-top_infill_extrusion_width = 0.4
 
 [print:0.10mm DETAIL @ANKER-CE]
 inherits = *0.10mm*
 compatible_printers_condition = printer_model=~/(M5-CE).*/ and nozzle_diameter[0]==0.4
-external_perimeter_extrusion_width = 0.4
-first_layer_extrusion_width = 0.5
-gcode_resolution = 0.006
-infill_extrusion_width = 0.4
-perimeter_extrusion_width = 0.4
-perimeters = 3
-raft_contact_distance = 0.15
-solid_infill_extrusion_width = 0.4
-support_material_contact_distance = 0.17
-support_material_interface_layers = 5
-support_material_xy_spacing = 80%
-top_infill_extrusion_width = 0.4
 
 [print:0.15mm QUALITY @ANKER-CE]
 inherits = *0.15mm*
-compatible_printers_condition = printer_model=~/(M5-CE).*/ and nozzle_diameter[0]==0.4
-first_layer_extrusion_width = 0.5
-gap_fill_speed = 40
-gcode_resolution = 0.008
-raft_contact_distance = 0.15
-support_material_contact_distance = 0.2
-support_material_extrusion_width = 0.37
-support_material_interface_layers = 5
-support_material_xy_spacing = 80%
 
 [print:0.15mm SPEED @ANKER-CE]
 inherits = *0.15mm*; *speed*
 compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
-gcode_resolution = 0.008
-raft_contact_distance = 0.15
-support_material_contact_distance = 0.2
-support_material_extrusion_width = 0.37
-support_material_interface_layers = 5
-support_material_xy_spacing = 80%
 top_solid_layers = 5
 
 [print:0.20mm QUALITY @ANKER-CE]
 inherits = *0.20mm*
-compatible_printers_condition = printer_model=~/(M5-CE).*/ and nozzle_diameter[0]==0.4first_layer_extrusion_width = 0.5
-gcode_resolution = 0.008
-perimeter_acceleration = 900
-raft_contact_distance = 0.2
-support_material_contact_distance = 0.2
-support_material_extrusion_width = 0.37
-support_material_interface_layers = 5
-support_material_speed =  50
-support_material_xy_spacing = 80%
 
 [print:0.20mm SPEED @ANKER-CE]
 inherits = *0.20mm*; *speed*
 compatible_printers_condition = printer_model=~/(M5).*/ and nozzle_diameter[0]==0.4
-first_layer_extrusion_width = 0.5
-raft_contact_distance = 0.2
-support_material_contact_distance = 0.2
-support_material_extrusion_width = 0.37
-support_material_interface_layers = 5
-support_material_xy_spacing = 80%
 top_solid_layers = 4
 
 [print:0.25mm QUALITY @ANKER-CE]
-inherits = *0.25mm*
-bridge_flow_ratio = 1
 compatible_printers_condition = printer_model=~/(M5-CE).*/ and nozzle_diameter[0]==0.4
-raft_contact_distance = 0.25
-support_material_contact_distance = 0.25
-support_material_interface_layers = 4
 
 [print:0.25mm SPEED @ANKER-CE]
 inherits = *0.25mm*; *speed*
 compatible_printers_condition = printer_model=~/(M5-CE).*/ and nozzle_diameter[0]==0.4
-raft_contact_distance = 0.25
-support_material_contact_distance = 0.25
-support_material_interface_layers = 4
 top_solid_layers = 3
 
 [print:0.30mm DRAFT @ANKER-CE]
 inherits = *0.30mm*
 compatible_printers_condition = printer_model=~/(M5-CE).*/ and nozzle_diameter[0]==0.4
-external_perimeter_extrusion_width = 0.5
-extrusion_width = 0.5
-first_layer_extrusion_width = 0.5
-infill_extrusion_width = 0.5
-perimeter_extrusion_width = 0.5
-raft_contact_distance = 0.2
-solid_infill_extrusion_width = 0.5
-support_material_contact_distance = 0.2
-support_material_extrusion_width = 0.38
-support_material_interface_layers = 5
-support_material_xy_spacing = 80%
-top_infill_extrusion_width = 0.45
+
 
 # When submitting new filaments please print the following temperature tower at 0.1mm layer height:
 #   https://www.thingiverse.com/thing:2615842
@@ -373,8 +290,8 @@ top_infill_extrusion_width = 0.45
 # So having some leeway to get good bed adhesion is not a luxury for many users
 
 [filament:*common*]
+compatible_printers_condition = printer_notes=~/.*PRINTER_ANKERMAKE_CE.*/
 cooling = 0
-compatible_printers = 
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 fan_always_on = 1
@@ -393,45 +310,44 @@ bed_temperature = 60
 bridge_fan_speed = 100
 filament_colour = #0dfc05
 filament_cost = 20
-filament_density = 1.25
+filament_density = 1.24
 filament_max_volumetric_speed = 15
 filament_type = PLA
 first_layer_bed_temperature = 60
-first_layer_temperature = 220
-full_fan_speed_layer = 4
+first_layer_temperature = 230
 max_fan_speed = 100
 min_fan_speed = 100
-temperature = 210
+temperature = 200
 
 [filament:*PLA+*]
 inherits = *common*
 bed_temperature = 60
 bridge_fan_speed = 100
+extrusion_multiplier = 0.97
 filament_colour = #fc9e05
 filament_cost = 22
 filament_density = 1.25
 filament_max_volumetric_speed = 17
 filament_type = PLA+
 first_layer_bed_temperature = 60
-first_layer_temperature = 225
-full_fan_speed_layer = 4
+first_layer_temperature = 230
 max_fan_speed = 100
 min_fan_speed = 100
-temperature = 215
+temperature = 200
 
 [filament:*PET*]
 inherits = *common*
-bed_temperature = 70
+bed_temperature = 80
 bridge_fan_speed = 50
 disable_fan_first_layers = 3
-full_fan_speed_layer = 5
+full_fan_speed_layer = 3
 filament_colour = #51a8f5
 filament_cost = 30
 filament_density = 1.27
 filament_max_volumetric_speed = 8
 filament_type = PETG
-first_layer_bed_temperature = 70
-first_layer_temperature = 245
+first_layer_bed_temperature = 80
+first_layer_temperature = 240
 max_fan_speed = 50
 min_fan_speed = 30
 temperature = 240
@@ -447,7 +363,7 @@ filament_density = 1.04
 filament_max_volumetric_speed = 11
 filament_type = ABS
 first_layer_bed_temperature = 90
-first_layer_temperature = 245
+first_layer_temperature = 240
 max_fan_speed = 30
 min_fan_speed = 20
 temperature = 240
@@ -475,7 +391,7 @@ autoemit_temperature_commands = 1
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;LAYER:{layer_num}
 between_objects_gcode = 
 default_filament_profile = "Generic PLA+ @ANKER-CE"
-deretract_speed = 80
+deretract_speed = 60
 end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
 extruder_colour = #FCE94F
 extruder_offset = 0x0
@@ -485,10 +401,10 @@ machine_limits_usage = emit_to_gcode
 machine_max_acceleration_e = 5000
 machine_max_acceleration_extruding = 5000
 machine_max_acceleration_retracting = 5000
-machine_max_acceleration_travel = 1250
+machine_max_acceleration_travel = 1500
 machine_max_acceleration_x = 5000
 machine_max_acceleration_y = 5000
-machine_max_acceleration_z = 100
+machine_max_acceleration_z = 5000
 machine_max_feedrate_e = 300
 machine_max_feedrate_x = 500
 machine_max_feedrate_y = 500
@@ -504,8 +420,8 @@ pause_print_gcode =
 printer_notes = 
 printer_settings_id = 
 printer_technology = FFF
-remaining_times = 0
-retract_before_travel = 0.8
+remaining_times = 1
+retract_before_travel = 3
 retract_before_wipe = 0
 retract_length = 3
 retract_layer_change = 0
@@ -515,7 +431,7 @@ retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 80
+retract_speed = 60
 silent_mode = 0
 single_extruder_multi_material = 0
 start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\nM900 T0 K0.06;linear advance
@@ -539,4 +455,4 @@ min_layer_height = 0.05
 nozzle_diameter = 0.4
 printer_model = M5-CE
 printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_ANKERMAKE_CE\nPRINTER_MODEL_M5
-printer_variant = 0.4
+printer_variant = 0.4
\ No newline at end of file