From 02bd226ede7faaebdd44a5cacc4231dba9befacf Mon Sep 17 00:00:00 2001 From: just-trey Date: Fri, 28 Jul 2023 23:54:45 -0400 Subject: [PATCH] Incoming/2.3.3 (#30) --- AMCE_config_bundle.ini | 69 ++++++++++++++++++++++++++++++++++++++++-- changelog.md | 7 ++++- readme.md | 4 +-- vendor/AnkerMakeCE.idx | 1 + vendor/AnkerMakeCE.ini | 4 +-- 5 files changed, 77 insertions(+), 8 deletions(-) diff --git a/AMCE_config_bundle.ini b/AMCE_config_bundle.ini index fa77cb3..0877012 100644 --- a/AMCE_config_bundle.ini +++ b/AMCE_config_bundle.ini @@ -1,4 +1,5 @@ -# generated by PrusaSlicer 2.6.0+win64 on 2023-07-04 at 03:11:22 UTC +# Community created printer profiles for AnkerMake printers. +# v2.3.3 [print:0.05mm ULTRADETAIL @AMCE] avoid_crossing_curled_overhangs = 0 @@ -1840,6 +1841,70 @@ slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 205 +[filament:Generic TPU 95A @AMCE] +bed_temperature = 30 +bridge_fan_speed = 50 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANKERMAKE.*/ +compatible_prints = +compatible_prints_condition = +cooling = 0 +disable_fan_first_layers = 3 +enable_dynamic_fan_speeds = 0 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1.03 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #8000FF +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 0 +filament_density = 1.24 +filament_deretract_speed = 50 +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 1.8 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_retract_before_travel = nil +filament_retract_before_wipe = 100% +filament_retract_layer_change = 1 +filament_retract_length = 3.5 +filament_retract_lift = nil +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = 90 +filament_settings_id = "" +filament_soluble = 0 +filament_spool_weight = 0 +filament_toolchange_delay = 0 +filament_type = TPU +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +filament_vendor = Generic +filament_wipe = 1 +first_layer_bed_temperature = 30 +first_layer_temperature = 225 +full_fan_speed_layer = 3 +idle_temperature = nil +inherits = Generic TPU 95A @ANKER-CE +max_fan_speed = 80 +min_fan_speed = 30 +min_print_speed = 10 +overhang_fan_speed_0 = 0 +overhang_fan_speed_1 = 0 +overhang_fan_speed_2 = 0 +overhang_fan_speed_3 = 0 +slowdown_below_layer_time = 5 +start_filament_gcode = "; Filament gcode\n" +temperature = 225 + [printer:AnkerMake M5 (0.4 mm nozzle) @AMCE] autoemit_temperature_commands = 1 bed_custom_model = @@ -1921,7 +1986,7 @@ wipe = 0 z_offset = 0 [presets] -print = 0.30mm SUPERDRAFT @AMCE +print = 0.20mm NORMAL @AMCE sla_print = sla_material = printer = AnkerMake-CE M5 (0.4mm nozzle) @AMCE diff --git a/changelog.md b/changelog.md index 2cfb083..5c38794 100644 --- a/changelog.md +++ b/changelog.md @@ -1,5 +1,10 @@ # Changelog +## v2.3.3 + +- Added New Profile for TPU (by @natescherer) +- switched primary branch from "master" to "main" + ## v2.3.2 - Improved PETG settings (by @Xelinor) @@ -57,7 +62,7 @@ ## v2.1.0 -- This version enables a fast mode consistently. See the [readme.md](https://github.com/Ankermgmt/prusaslicer-ankermake-ce-profiles/blob/master/readme.md) for more details. +- This version enables a fast mode consistently. See the [readme.md](https://github.com/Ankermgmt/prusaslicer-ankermake-ce-profiles/blob/main/readme.md) for more details. - New community edition M5 icon for the configuration wizard - Optimized bottom and top surface patterns for regular profiles. (monotonic lines) - Tuned some speed settings and moved to percentages where possible. diff --git a/readme.md b/readme.md index f0b60c0..753896f 100644 --- a/readme.md +++ b/readme.md @@ -4,8 +4,6 @@ ![image](https://github.com/Ankermgmt/prusaslicer-ankermake-ce-profiles/assets/10281380/77beb5cb-c6cb-4385-a266-0ff0e30ac9c2) -[WE NOW HAVE AN INSTALL SCRIPT (YAY!)...](/readme.md#scripted-install) - ## Overview This repository holds the latest version and updates to AnkerMake community profiles [initially developed and maintained by @just-trey](https://github.com/just-trey/ankermake-m5-profile). We have decided to continue to support these profiles to allow users an alternative to the official profiles provided by AnkerMake. You can install these profiles alongside the built-in AnkerMake profiles. Why not install both and see which one you prefer? @@ -16,7 +14,7 @@ Please note that the FAST profile included is NOT the max acceleration and speed ### A note about z-lift -We have z-lift disabled by default as it impacts print times. If you find your nozzle scraping surfaces, plan on manual filament changes mid-print, or are using ironing, enabling z-lift is highly recommended. We recommend a .25 z-lift height. +We have z-lift disabled by default as it impacts print times. If you find your nozzle scraping surfaces, plan on manual filament changes mid-print, or are using ironing, enabling z-lift is highly recommended. We recommend at least a .25 z-lift height. ## Known Issues diff --git a/vendor/AnkerMakeCE.idx b/vendor/AnkerMakeCE.idx index de83d41..1b329b9 100644 --- a/vendor/AnkerMakeCE.idx +++ b/vendor/AnkerMakeCE.idx @@ -1,4 +1,5 @@ min_slic3r_version = 2.6.0 +2.3.3 TPU Profile 2.3.2 PETG improvements min_slic3r_version = 2.6.0-alpha6 2.3.1 Add profile for import diff --git a/vendor/AnkerMakeCE.ini b/vendor/AnkerMakeCE.ini index 0e2ec61..e1fb55a 100644 --- a/vendor/AnkerMakeCE.ini +++ b/vendor/AnkerMakeCE.ini @@ -5,10 +5,10 @@ name = AnkerMake CE # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 2.3.2 +config_version = 2.3.3 # Where to get the updates from? # config_update_url = https://github.com/Ankermgmt/prusaslicer-ankermake-ce-profiles/releases/latest -# changelog_url = https://github.com/Ankermgmt/prusaslicer-ankermake-ce-profiles/blob/master/changelog.md +# changelog_url = https://github.com/Ankermgmt/prusaslicer-ankermake-ce-profiles/blob/main/changelog.md # The printer models will be shown by the Configuration Wizard in this order, # also the first model installed & the first nozzle installed will be activated after install.