Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

hsgq z110 bandwidth limit to 30Mbps #344

Open
DonuyThompson opened this issue Dec 9, 2024 · 14 comments
Open

hsgq z110 bandwidth limit to 30Mbps #344

DonuyThompson opened this issue Dec 9, 2024 · 14 comments

Comments

@DonuyThompson
Copy link

DonuyThompson commented Dec 9, 2024 •
edited
Loading

My ISP is Maxis 1000Mbps package.

I am usinghsgq z110. I flash the firmware to Z110_HSGQ_241129.tar
I also follow the instruction perform necessary setup stick. I am able to connect to the ISP via PPPoE.
However, when perform speedtest. The download speed cap at 30Mbps and upload is below 1Mbps.
Plug the fiber cable back to original nokia G-1425G-B GPON, the speed is usual 960M/290M.
This is the Chipset of the GPON stick:

cat /proc/cpuinfo

system type : RTL8672
processor : 0
cpu model : 56322
BogoMIPS : 299.00
tlb_entries : 64
mips16 implemented : yes

cat /etc/version

V1.0.5-241129 -- Fri 29 Nov 2024 11:25:01 AM CST

diag

RTK.0> bandwidth get egress port all
port: 0 rate:4194296
queue: 0 apr-index: 0
queue: 1 apr-index: 0
queue: 2 apr-index: 0
queue: 3 apr-index: 0
queue: 4 apr-index: 0
queue: 5 apr-index: 0
queue: 6 apr-index: 0
queue: 7 apr-index: 0
port: 1 rate:4194296
queue: 0 apr-index: 8
queue: 1 apr-index: 8
queue: 2 apr-index: 8
queue: 3 apr-index: 8
queue: 4 apr-index: 8
queue: 5 apr-index: 8
queue: 6 apr-index: 8
queue: 7 apr-index: 8
port: 2 rate:4194296
queue: 0 apr-index: 0
queue: 1 apr-index: 0

--More--
queue: 2 apr-index: 0
queue: 3 apr-index: 0
queue: 4 apr-index: 0
queue: 5 apr-index: 0
queue: 6 apr-index: 0
queue: 7 apr-index: 0
RTK.0> andwidth get ingress port all
^Parse error
RTK.0> bandwidth get ingress port all
port: 0 rate:4194296
port: 1 rate:4194296
port: 2 rate:4194296
RTK.0> port get status port all
Port Status Speed Duplex TX_FC RX_FC

0 Up 2.5G Full Dis Dis
1 Down 10M Half En En
2 Down 1000M Full Dis Dis
RTK.0>

2024-12-09_194712

help my
@Anime4000
Copy link
Owner

this ONU need set VLAN and connect without VLAN

@DonuyThompson
Copy link
Author

this ONU need set VLAN and connect without VLAN

How so?

@vuducdong
Copy link

@DonuyThompson Try using SFU firmware

@DonuyThompson
Copy link
Author

@DonuyThompson Try using SFU firmware

Thank you, if possible give me the appropriate update

@vuducdong
Copy link

Z110_HSGQ_SFU_240625_2.zip

Please unzip this file to tar, then choose tar file to upgrade (up 2 times for 2 images)

Before, remember unplug fiber cable

After upgrade done, copy mac and mackey, use this command to reset factory

flash default hs
reboot

Finally, fill in all necessary parameters for setup onu (include mac and mackey above).

@DonuyThompson Try using SFU firmware

Thank you, if possible give me the appropriate update

@DonuyThompson
Copy link
Author

Z110_HSGQ_SFU_240625_2.zip

Please unzip this file to tar, then choose tar file to upgrade (up 2 times for 2 images)

Before, remember unplug fiber cable

After upgrade done, copy mac and mackey, use this command to reset factory

flash default hs reboot

Finally, fill in all necessary parameters for setup onu (include mac and mackey above).

@DonuyThompson Try using SFU firmware

Thank you, if possible give me the appropriate update

No connection

2024-12-10_144848

@vuducdong
Copy link

What do you mean????

@DonuyThompson
Copy link
Author

DonuyThompson commented Dec 10, 2024 •
edited
Loading

What do you mean????

https://streamable.com/35kjqj

@vuducdong
Copy link

Please show mib 84, 171 and 329

omcicli mib get 84
omcicli mib get 171
omcicli mib get 329

@DonuyThompson

@DonuyThompson
Copy link
Author

Please show mib 84, 171 and 329

omcicli mib get 84 omcicli mib get 171 omcicli mib get 329

@DonuyThompson

login: admin
Password:

BusyBox v1.22.1 (2024-06-25 17:47:09 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

omcicli mib get 84

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

omcicli mib get 171

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
ExtVlanTagOperCfgData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

omcicli mib get 329

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VEIP
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

EntityId: 0x0601
AdminState: 1
OperState: 1
InterDomainName: 0x00000000000000000000000000000000000000000000000000
TcpUdpPtr: 0x0000
IansAssignPort: 0
CustomizedSlotId: 0xff

@vuducdong
Copy link

vuducdong commented Dec 11, 2024 •
edited
Loading

@DonuyThompson

According to the video link you sent above, I see that in the vlan section there are 9 and 114, while your mib 84 and 171 information is empty. Do you have fiber attached?

check OLT type:

omcicli mib get 131

After fill gpon sn, ploam pass, vendor id, hardware version, software version, Have you committed and rebooted yet?

Example:

flash set PON_VENDOR_ID ALCL
flash set GPON_SN ALCLxxxxxxx
flash set GPON_PLOAM_FORMAT 1
flash set GPON_PLOAM_PASSWD 31323334353637383930
flash set LOID 12345678
flash set LOID_PASSWD 123456
flash set OMCI_OLT_MODE 3
flash set OMCC_VER 128
flash set OMCI_FAKE_OK 1
flash set HW_HWVER 3FExxxxxxx
flash set HW_CWMP_PRODUCTCLASS G-1425G-B
flash set GPON_ONU_MODEL GPON,ONT
flash set HW_CWMP_MANUFACTURER NOKIA

nv setenv sw_custom_version0 3FExxxxxxx
nv setenv sw_custom_version1 3FExxxxxxx
reboot

Note that: with OLT as ALCL, Xpon onu will use s-vlan (for example, 114) instead of vlan 1000 as on the ISP ONT. And you may need to set vlan mode to auto, then tag internet vlan on your router.

@DonuyThompson
Copy link
Author

DonuyThompson commented Dec 11, 2024 •
edited
Loading

Please show mib 84, 171 and 329

omcicli mib get 84 omcicli mib get 171 omcicli mib get 329

@DonuyThompson

This is the measurement with the fiber cable installed.

login: admin
Password:

BusyBox v1.22.1 (2024-06-25 17:47:09 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

omcicli mib get 131

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
OltG
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

EntityId: 0x00
OltVendorId: 0x414c434c
EquipId:
Version:
ToDInfo:
Sequence number of GEM superframe: 0x0
Timestamp: secs 0, nanosecs 0

omcicli mib get 84

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

EntityID: 0xe102
FilterTbl[0]: PRI 0,CFI 0, VID 9
FwdOp: 0x10
NumOfEntries: 1

=================================
EntityID: 0xe10b
FilterTbl[0]: PRI 0,CFI 0, VID 9
FwdOp: 0x10
NumOfEntries: 1

=================================
EntityID: 0xff02
FilterTbl[0]: PRI 0,CFI 0, VID 114
FwdOp: 0x10
NumOfEntries: 1

omcicli mib get 171

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
ExtVlanTagOperCfgData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

EntityId: 0xe01
AssociationType: 10
ReceivedFrameVlanTagOperTableMaxSize: 0
InputTPID: 0x8100
OutputTPID: 0x8100
DsMode: 0
ReceivedFrameVlanTaggingOperTable
INDEX 0
Filter Outer : PRI 8,VID 1000, TPID 5
Filter Inner : PRI 8,VID 4096, TPID 0, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 1
Treatment Inner : PRI 9,VID 9, TPID 3
INDEX 1
Filter Outer : PRI 15,VID 4096, TPID 0
Filter Inner : PRI 8,VID 1000, TPID 5, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 1
Treatment Inner : PRI 8,VID 9, TPID 2
INDEX 2
Filter Outer : PRI 15,VID 4096, TPID 0
Filter Inner : PRI 15,VID 0, TPID 5, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 3
Treatment Inner : PRI 15,VID 0, TPID 2
INDEX 3
Filter Outer : PRI 14,VID 4096, TPID 5
Filter Inner : PRI 14,VID 4096, TPID 0, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 3
Treatment Inner : PRI 15,VID 4096, TPID 3
INDEX 4
Filter Outer : PRI 15,VID 4096, TPID 0
Filter Inner : PRI 14,VID 4096, TPID 5, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 3
Treatment Inner : PRI 15,VID 4096, TPID 2
AssociatedMePoint: 0x601
DscpToPbitMapping:
0x000000
0x249249
0x492492
0x6db6db
0x924924
0xb6db6d
0xdb6db6
0xffffff

Parsed DscpToPbitMapping:
dscp: 0 => pbit: 0
dscp: 1 => pbit: 0
dscp: 2 => pbit: 0
dscp: 3 => pbit: 0
dscp: 4 => pbit: 0
dscp: 5 => pbit: 0
dscp: 6 => pbit: 0
dscp: 7 => pbit: 0
dscp: 8 => pbit: 1
dscp: 9 => pbit: 1
dscp: 10 => pbit: 1
dscp: 11 => pbit: 1
dscp: 12 => pbit: 1
dscp: 13 => pbit: 1
dscp: 14 => pbit: 1
dscp: 15 => pbit: 1
dscp: 16 => pbit: 2
dscp: 17 => pbit: 2
dscp: 18 => pbit: 2
dscp: 19 => pbit: 2
dscp: 20 => pbit: 2
dscp: 21 => pbit: 2
dscp: 22 => pbit: 2
dscp: 23 => pbit: 2
dscp: 24 => pbit: 3
dscp: 25 => pbit: 3
dscp: 26 => pbit: 3
dscp: 27 => pbit: 3
dscp: 28 => pbit: 3
dscp: 29 => pbit: 3
dscp: 30 => pbit: 3
dscp: 31 => pbit: 3
dscp: 32 => pbit: 4
dscp: 33 => pbit: 4
dscp: 34 => pbit: 4
dscp: 35 => pbit: 4
dscp: 36 => pbit: 4
dscp: 37 => pbit: 4
dscp: 38 => pbit: 4
dscp: 39 => pbit: 4
dscp: 40 => pbit: 5
dscp: 41 => pbit: 5
dscp: 42 => pbit: 5
dscp: 43 => pbit: 5
dscp: 44 => pbit: 5
dscp: 45 => pbit: 5
dscp: 46 => pbit: 5
dscp: 47 => pbit: 5
dscp: 48 => pbit: 6
dscp: 49 => pbit: 6
dscp: 50 => pbit: 6
dscp: 51 => pbit: 6
dscp: 52 => pbit: 6
dscp: 53 => pbit: 6
dscp: 54 => pbit: 6
dscp: 55 => pbit: 6
dscp: 56 => pbit: 7
dscp: 57 => pbit: 7
dscp: 58 => pbit: 7
dscp: 59 => pbit: 7
dscp: 60 => pbit: 7
dscp: 61 => pbit: 7
dscp: 62 => pbit: 7
dscp: 63 => pbit: 7

=================================
EntityId: 0xf0f
AssociationType: 0
ReceivedFrameVlanTagOperTableMaxSize: 0
InputTPID: 0x8100
OutputTPID: 0x8100
DsMode: 0
ReceivedFrameVlanTaggingOperTable
INDEX 0
Filter Outer : PRI 15,VID 0, TPID 0
Filter Inner : PRI 15,VID 114, TPID 5, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 0
Treatment Inner : PRI 0,VID 114, TPID 2
AssociatedMePoint: 0xf0f
DscpToPbitMapping:
0x000000
0x249249
0x492492
0x6db6db
0x924924
0xb6db6d
0xdb6db6
0xffffff

Parsed DscpToPbitMapping:
dscp: 0 => pbit: 0
dscp: 1 => pbit: 0
dscp: 2 => pbit: 0
dscp: 3 => pbit: 0
dscp: 4 => pbit: 0
dscp: 5 => pbit: 0
dscp: 6 => pbit: 0
dscp: 7 => pbit: 0
dscp: 8 => pbit: 1
dscp: 9 => pbit: 1
dscp: 10 => pbit: 1
dscp: 11 => pbit: 1
dscp: 12 => pbit: 1
dscp: 13 => pbit: 1
dscp: 14 => pbit: 1
dscp: 15 => pbit: 1
dscp: 16 => pbit: 2
dscp: 17 => pbit: 2
dscp: 18 => pbit: 2
dscp: 19 => pbit: 2
dscp: 20 => pbit: 2
dscp: 21 => pbit: 2
dscp: 22 => pbit: 2
dscp: 23 => pbit: 2
dscp: 24 => pbit: 3
dscp: 25 => pbit: 3
dscp: 26 => pbit: 3
dscp: 27 => pbit: 3
dscp: 28 => pbit: 3
dscp: 29 => pbit: 3
dscp: 30 => pbit: 3
dscp: 31 => pbit: 3
dscp: 32 => pbit: 4
dscp: 33 => pbit: 4
dscp: 34 => pbit: 4
dscp: 35 => pbit: 4
dscp: 36 => pbit: 4
dscp: 37 => pbit: 4
dscp: 38 => pbit: 4
dscp: 39 => pbit: 4
dscp: 40 => pbit: 5
dscp: 41 => pbit: 5
dscp: 42 => pbit: 5
dscp: 43 => pbit: 5
dscp: 44 => pbit: 5
dscp: 45 => pbit: 5
dscp: 46 => pbit: 5
dscp: 47 => pbit: 5
dscp: 48 => pbit: 6
dscp: 49 => pbit: 6
dscp: 50 => pbit: 6
dscp: 51 => pbit: 6
dscp: 52 => pbit: 6
dscp: 53 => pbit: 6
dscp: 54 => pbit: 6
dscp: 55 => pbit: 6
dscp: 56 => pbit: 7
dscp: 57 => pbit: 7
dscp: 58 => pbit: 7
dscp: 59 => pbit: 7
dscp: 60 => pbit: 7
dscp: 61 => pbit: 7
dscp: 62 => pbit: 7
dscp: 63 => pbit: 7

omcicli mib get 329

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VEIP
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

EntityId: 0x0601
AdminState: 0
OperState: 0
InterDomainName: 0x00000000000000000000000000000000000000000000000000
TcpUdpPtr: 0x0000
IansAssignPort: 0
CustomizedSlotId: 0xff

@vuducdong
Copy link

@DonuyThompson try with vlan 9 for internet (on ONT from ISP is vlan 1000, right?)

Tag vlan 9 on XPON ONU Z110 or change to auto then tag on WAN router

@DonuyThompson
Copy link
Author

Unfortunately there is no connection

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@Anime4000 @DonuyThompson @vuducdong