SZ Neo Coolcam Z-Wave device APP for Homey

Donations will be used for charity. Every 25 euros collected will be send to a different charity organization every time. I make this app for fun and don’t tend to make profit for my own. If you like the work. Please think of the people who you could please a bit by donating. Want the next donation to go to your favorite charity ? Don’t hesitate and tell me what it is.

Supported devices with most common parameters:

• NAS-PD01ZE, Motion Sensor
• NAS-PD02ZE, Motion Sensor V2
• NAS-WR01ZE, Power Switching Plug
• NAS-WR02ZE, Power Switching Plug V2
• NAS-SC01ZE, Touch Wall Switch Single
• NAS-SC02ZE, Touch Wall Switch Dual
• NAS-SC03ZE, Touch Wall Switch Triple
• NAS-CS03ZE, Curtain Controller
• NAS-AB01ZE, Siren / Doorbell speaker
• NAS-AB02ZE, Siren / Doorbell speaker V2
• NAS-RC01ZE, Remote KeyFob / Alarm Button
• NAS-RS01ZE, Remote Emergency Button
• NAS-DS01ZE, Door Sensor
• NAS-WS01ZE, Flood Sensor

Supported devices with some parameters:

None until Neo releases new products

Supported Languages:

• English
• Dutch
• German

Support notes:

Most reliable way to update battery powered devices

1. Place the sensor near Homey (< 1 meter)
2. Change the settings to the values you want
3. Wake up the sensor (triple click the button)
4. During the blinking of the LED (indicating connection to Homey) press "save settings"

If problems persists:
a. Temporarely disable other Z-wave apps
b. change the setting to another value with above steps
c. check if effective and retry to the desired value

Change Log:

v 2.1.3

Made report parsers for V1 plug independend from the homey-mesh-driver.
Finished ( i hope so :) ) the code for the curtain contoller.
Setting changes for the Pir V1.

v 2.1.2

Fix for V2 plugs and negative value reported back - THX 2 nlrb.

v 2.1.1

Corrected "includeSecure": false placement. No secure adds until Athom fixes the S2 and delays on secure devices.
Added test code for curtain controller.
Fixed some language errors.
Added some more device ID's that users reported.
Fixed settings for the v2 plugs

v 2.1.0 - Initial Beta Release - Breaking Changes for Wall Switch !!

Added support Homey Energy. Added support for Touch Wall Switch Triple
Driver split the Power Switching Plug V1 and V2 version - Could need re-pair of the Power Switching Plug V2.
Renamed wall switch driver names to the changed Coolcam naming - Will need re-pair of the Touch Wall Switch Dual.
Change: All battery powered devices are forced unsecure to avoid the problems in the Homey z-wave core.

v 2.0.21

Added support for Doorsensor RU and NZ region / Added support for PIRv1 RU region.

v 2.0.20

Added German Translation to the app.
Minimum homey firmware 2.0.5 - Time for all to update and dump V1 series.

v 2.0.19

Update setting for PIRv2 detection led Enable/Disable

v 2.0.18

Extra setting added to the v2 PIR "Motion detection event report"

v 2.0.17

Again back to the old mesh driver. Now updates dont get pushed to Homey

v 2.0.16

Updated to latest mesh driver again after fixes being done by Athom

v 2.0.15

Added new EU device ID's to the app for PowerPlug

v 2.0.14

Switched back to the old mesh driver since the new one breaks reporting in the homey core

v 2.0.13

update:
Fixed missing "signed": false in Doorbell/Siren

v 2.0.12

update:
Added some device ID's from the PIR

v 2.0.11

update:
Added some device ID's from the PIR, Siren and Plug
Update to latest Mesh-Driver

v 2.0.10

update:
Small update for the PIRv2
Update to latest Mesh-Driver

v 2.0.9

update:
Small update for single wall switches

v 2.0.8

update:
Added the new forum and issue links for the new appstore layout

v 2.0.7

update:
First reports came in of a real PIR v2 so its added with lightspeed

v 2.0.6

fixed:
Meter Reset in driver on WR01Z Plugs after support dropped in the Z-Wave Mesh driver after issues

v 2.0.5

fixed:
Water Sensor not reporting in on leakage
Motion Sensor sensitivity settings

v 2.0.4

fixed: Added fix from z-wave mesh driver that should fix some trouble with the dual switches and a specific firmware version

v 2.0.3 - Stable Release from beta SDKv2 versions

update: Added volume action cards for siren and doorbell mode NAS-AB01ZE

v 2.0.2

fixed:
Fixed Siren Trigger card that did not fire correct
update:
Updated more device icons for better experience

v 2.0.1

update:
Added support for the KeyFob/ Emergency Remote Control
Added support for the SOS Remote button
Updated device icons for better appstore experience
Updated some device svg icons for better experience on Homey

v 2.0.0

update:
Moved App to zwave-mesh driver and SDKv2
Added all other know country/regio id's known in de z-wave alliance database in the app
Added support for the NAS-SC01ZE Touch Wall Switch Single
Added empty driver for PD02 so it shows in appstore as device icon/tile

v 1.1.23

fixed:
NAS-SW01ZE - Support for V1 and V2 Touch Wall Switch Dual

v 1.1.22

update:
all - Add productDocumentation and unlearnmode
all - Updated NEO branded images

v 1.1.21

fixed:
NAS-AB01ZE - Add action card for setting alarm or doorbell tune
NAS-AB01ZE - Fixed alarm state action card

v 1.1.20

fixed:
NAS-DS01ZE - Settings naming error corrected (basic_set_level)

v 1.1.19

fixed:
NAS-SW01ZE - updated driver, tested and working ok (re-pair of device required)

update:
NAS-SW01ZE - Add switch LED action card to enable / disable the LED's
NAS-AB01ZE - Updated action card for alarm mode (Siren / Doorbel)
NAS-AB01ZE - Updated action card for alarm state (Sound / Silence)
Updated Z-wave driver (1.1.8)

v 1.1.18

update:
NAS-AB01ZE - Add Siren / Doorbel switch mode action card
Updated Z-Wave driver (1.1.6)

v 1.1.17

update: NAS-WR01ZE - Add Power Meter reset flow card

v 1.1.16

update: All devices - update battery_alarm, code clean-up, minor fixes

v 1.1.15

update:
NAS-SW01ZE - Defined multinode 1, should be done by itself but made sure multinode 1 is also defined just i case this might ever change.

v 1.1.14

update:
NAS-AB01ZE - Updated mobile card to show battery alarm and toggle on icon

notes:
Somehow battery reporting has stopped again with the Homey 1.1.4 firmware.
In order to get it working again re-pair of device is required, for now this looks like the only solution.

v 1.1.13

update:
Support for GetOnWakeUp in Z-Wave driver enabled Updated Z-Wave driver

v 1.1.12

(Only released in Developers Preview for testing)

v 1.1.11

update:
NAS-AB01ZE - Updated driver for compatibility 1.1.3 firmware
NAS-DS01ZE - Updated driver for compatibility 1.1.3 firmware
NAS-PD01ZE - Updated driver for compatibility 1.1.3 firmware
NAS-WS01ZE - Updated driver for compatibility 1.1.3 firmware
NAS-WR01ZE - Updated driver for compatibility 1.1.3 firmware (standardized custom capabilities)

v 1.1.10

update:
NAS-AB01ZE - Add battery alarm and updated battery reporting + All settings added so the siren can also be used as doorbell speaker
NAS-DS01ZE - Add battery alarm and updated battery reporting + All settings added
NAS-PD01ZE - Add battery alarm and updated battery reporting
NAS-WS01ZE - Add battery alarm and updated battery reporting
NAS-WR01ZE - re-added custom capabilities due to delays on Homey v1.1.3

notes:
In order to make use of the battery alarm functionality, re-pair of device is required.
Battery reporting should work after app / driver update

Older changelog notes have been ereased from this timeline......