mse: streams: EOF

[scythk]

Both the RTSP stream directly from camera and the camera entity from ONVIF integration got "mse: streams: EOF" error sometimes, and both return to normal sometimes.

There are errors in homeassistant log:
Error from stream worker: Error opening stream (INVALIDDATA, Invalid data found when processing input, rtsp://:@192.168..:554/stream1)

The camera entity itself works fine and the RTSP stream can be played using VLC player on my computer with no problem, so I assmue the problem is with the WebRTC integration.

[AlexxIT]

This error from core stream component.

Error from stream worker: Error opening stream (INVALIDDATA, Invalid data found when processing input, rtsp://:@192.168..:554/stream1)

Variants:

• you have bad camera
• your camera has bad connection (wi-fi, etc)
• your camera is overloaded

I can assume you have a TP-Link.

[scythk]

This error from core stream component.

Error from stream worker: Error opening stream (INVALIDDATA, Invalid data found when processing input, rtsp://:@192.168..:554/stream1)

Variants:

• you have bad camera
• your camera has bad connection (wi-fi, etc)
• your camera is overloaded

I can assume you have a TP-Link.

Yes I am using TP-link, does TP-link camera have common issue like this? The TP-link app works good and the connection should be OK.
And what do you mean camera overloaded? Should I lower the bit rate or resoultion?

[AlexxIT]

If these cameras are used correctly - they works fine.

• they must have a good wifi connection
• they must have only one connection, maximum 2 (for example you already have minimum three - from stream integration and two from this integration - not good)
• better to disable recording and motion detection on the camera

[scythk]

My older TP link camera works all good, but the newer one still has problem after using wired connection, lower resolution and turn off motion detection. Sometimes it got mse: streams: EOF and sometimes it got audio works but black screen with HLS or RTC on the upper right corner.
Had to switch back to the older one for now.

[bmorgenthaler]

I'm having the same issue with a TP link camera BUT the RTSP link is coming from Scrypted with is pulling the camera feed just fine and sharing it to homekit and native homeassistant picture glance.