diff --git a/README.md b/README.md index 66fe2c4..19cdd8a 100644 --- a/README.md +++ b/README.md @@ -24,7 +24,7 @@ Infinite-ISP Image Signal Processing Pipeline FPGA binaries for XCK26 Zynq® Ult 5. Upload the desired binary file (e.g. Infinite-ISP_v1.2-AR1335.bin) provided in the release on the Kria KV260 AI Starter Kit. 6. Reset the Kria KV260 board and visualize the Infinite-ISP output on your monitor screen. 7. Connect the USB cable with the JTAG/USB port on Kria to read the messages over the serial interface (baud rate 115200). -8. A configuration menu as shown below will appear. Details of the user menu are provided in the release notes: +8. A configuration menu as shown below will appear. Details of the user menu are provided in the [user guide](https://github.com/10x-Engineers/Infinite-ISP_FPGABinaries/blob/release_v1.2/doc/Infinite-ISP%20Configuration%20Menu.md): ![status before dumping](/doc/v1.2/user_menu.png) @@ -42,7 +42,7 @@ Infinite-ISP Image Signal Processing Pipeline FPGA binaries for XCK26 Zynq® Ult 7. Connect the USB cable with the JTAG/USB port on Kria to read the messages over the serial interface (baud rate 115200). 8. RAW-ISPout image pair and Burst Capture frames dump in SD Card status will be displayed over serial interface: -![status before dumping](/doc/v1.2/user_menu.png) +![status before dumping](/doc/v1.2/user_menu_1.png) 9. If you want to dump frame(s), do so by going to option 2, and then you can remove the SD card from the Kria board.